Certificate of Accreditation

Transcription

1 PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Paseo de la Cañada # 158, Colonia Fuentes Sección Lomas, Reynosa, Tamaulipas, C.P (Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognized International Standard: ISO/IEC 17025:2005 This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (as outlined by the joint ISO-ILAC-IAF Communiqué dated January 2009): Dimensional, Mechanical, Mass, Force and Weighing Devices, Thermodynamic, Time & Frequency, Electrical, Acoustic and Chemical Calibration (As detailed in the supplement) Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate. This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the Accreditation body s duty to observe and comply with the said rules. For PJLA: Initial Accreditation Issue Date: Expiration Date: February 12, 2013 September 30, 2017 November 30, 2019 Tracy Szerszen President/Operations Manager Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver, Suite 1325 Troy, Michigan Accreditation No.: Certificate No.: L The validity of this certificate is maintained through ongoing assessments based on a continuous accreditation cycle. The validity of this certificate should be confirmed through the PJLA website: Page 1 of 22

2 Dimensional Calipers F Outside Micrometers F Inside Micrometer F Height Gages F Certificate of Accreditation: Supplement Reynosa, Tamaulipas, C.P Accreditation is granted to the facility to perform the following calibrations 0.05 in to 80 in (0.01 mm to 300 mm) 0.05 in to 80 in (1 mm to 100 mm) 0.05 in to 24 in (1 mm to mm) 0.05 in to 48 in (1 mm to 300 mm) AND ( L) µin [( L) µm ( L) µin [0.6 µm] ( L) µin 0.6 µm ( L) µin [5.8 µm] Gage Blocks & Caliper Checker NMX-CH-002- IMNC-2004 Gage Blocks & Caliper Checker NMX-CH-099- IMNC-2004 Caliper Checker NMX-CH-092 & 093- IMNC-2005 Gage Blocks & Caliper Checker NMX-CH-141- IMNC-2005 Gage Block NMX-CH-149-IMNC-2005 Indicators F 0.05 in to 5 in (1 mm to 100 mm) ( L) µin [( L) µm] Depth Gages F 0.05 in to 48 in ( L) µin Gage Block NMX-CH-002-IMNC-2004 Surface Plates F 96 in to 120 in 32 µin Repeat-O-Meter Repeat Measurement Angle Blocks FO 0 to Optical Comparator Optical Comparator X, Z Vertical Axis Linearity X, Y Horizontal Axis Linearity F Optical Comparator Angularity O Optical Comparator Magnification F Optical Comparator Radios O Thread Plug Gages F (Pitch Diameter) Thread Ring Gage F (Pitch Diameter) 12 in Maximum ( L) µin Glass Scale 0 to Glass Block Set 10 X 20 X 25 X 50 X X 62.5 X ( L) µin Glass Scale 0.25 in to 6.5 in ( L) µin Radios Reticule 0-80 in to 6-16 in 89 µin External Super Micrometer & Thread Measuring Wire Set 0-80 in to 4 in 89 µin Mahr Federal 36B-10 ID/OD Thread Measuring Gage & Master Plugs Comparison Gages Block F 0.05 in to 6 in ( L) μin Gage Block Comparator & Master Gage Block Issue: 09/2017 This supplement is in conjunction with certificate #L Page 2 of 12

3 Dimensional AND Protractor F 0 to Angle Blocks NMX-CH-151-IMNC Precision Level F in to 18 in 310 µin Gage Block, Feeler Gage & Sine Plate Radius Gage F 0.01 in to 1 in 140 µin Optical Comparator Plain Ring Gage F Cylindrical Gage, Plain Plug Gage/Pin Gage/Feeler Gage F in to 10 in (0.01 mm to 254 mm) 10 µin to 10 in (0.1µm to 254 mm) 60 µin (1.5 µm) 27 µin (0.69 µm) Optical Comparator External Super Micrometer Bore Gage F in to in 87 µin Master Ring Gage Laser Mike F Up to 50 mm ( L) µm Master Pin Gage Class XXX Video Measuring Machine/Tool Maker & Microscope X & Y Axis Linearity O Up to 24 in 4 µin Caliper Checker & Glastonbury Gage CMM Linear Displacement Accuracy Certification O 0.51 in to 1 in 110 µin Caliper Checker / 1.01 in to 4 in 150 µin Glastonbury Gage 4.01 in to 12 in 210 µin Roughness Tester F 116 µin 2.4 µin Precision Reference Specimen Coating Thickness Gage F 23 µm to µm 2 µm Coating Thickness 0.91 mm to mm 0.08 mm Standard Glass Scale F Up to 0.2 in 91 µin Optical Comparator Metalic Ruler & Flexometers F 0.21 in to 0.5 in 94 µin 0.51 in to 1 in 110 µin 1.01 in to 4 in 150 µin 4.01 in to 12 in 210 µin Optical Comparator Up to 80 in 200 µin Metallic Ruler NMX-CH-040-IMNC Issue: 09/2017 This supplement is in conjunction with certificate #L Page 3 of 22

4 Mass, Force and Weighing Devices Certificate of Accreditation: Supplement AND Scales and Balances O 10 mg to 500 mg (5.7 x x 10-8 Wt) g Weight Set Class 1 g to g (7.4 x x 10-6 Wt) g F1 1 kg to 10 kg (2.7 x x 10-3 Wt) g 10 kg to 20 kg (1.2 x x 10-7 Wt) kg Weight Set Class F 1 lb to 50 lb (1.7 x x 10-5 Wt) lb 50 lb to lbs (4.4 x x 10-5 Wt) lb Weights Class F2 10 mg mg Master Weights 20 mg mg Double Sustitution A-B-B-A Class F1 50 mg mg OIML R mg mg 200 mg mg 500 mg mg 1 g mg 2 g 0.07 mg 5 g mg 10 g mg 20 g mg 50 g mg 100 g 0.12 mg 200g 0.13 mg 500 g 9.5 mg 1 kg 9.5 mg Weights Class M2 F 2 kg 95 mg Master Weights 5 kg 150 mg Double Substitution A-B-B-A Class M1 10 kg g OIML R kg 0.13 g Weights Class ANSI/ASTM E 617 Class 7 F Rough Weighing Applications 1 lb 130 µlb Master Weights 2 lb 140 µlb Double Substitution A-B-B-A Class 6 5 lb 340 µlb ANSI/ASTM E lb 160 µlb 20 lb 150 µlb 50 lb 310 µlb Issue: 09/2017 This supplement is in conjunction with certificate #L Page 4 of 22

5 Mass, Force and Weighing Devices Force Tension & Compression F Certificate of Accreditation: Supplement AND 0 N to N 0.3 % of reading Load Cell and N to N 0.16 % of reading Weights ASTM E N to N 0.13 % of reading N to N 0.11 % of reading N to N 0.12 % of reading Thermodynamic DEVICE SIZE AS AND Laser Thermometer F Up to 50 C 0.8 C IR Blackbody Thermal 50.1 C to 200 C 1.6 C Calibrator ICI 500 Bimetal Thermometer/ Mercury Thermometer F C to 500 C 2.8 C -10 C to 100 C 0.08 C Dry well Calibrator Fluke C to 300 C 0.39 C 9100S C to 375 C 0.77 C Time & Frequency DEVICE SIZE AS AND Stop Watch and Timers F s 50 ms Stop Watch Robic SC-808 Comparison Frequency Source F 0.01 Hz to khz 25 ppm + 1 mhz Fluke 5500A 12 khz to 2 MHz 25 ppm + 15 mhz Tachometer F 100 rpm to rpm rpm Digital Stroboscope Shimpo DT-301 Speed Controller F 0.5 rpm to rpm % of reading Pocket Laser Tachometer Monarch PLT200 Issue: 09/2017 This supplement is in conjunction with certificate #L Page 5 of 22

6 Electrical MEASURED INSTRUMENT, DEVICE SIZE AS AND Wrist Strap F 675 kω to 11.5 MΩ kω Calibration Unit Foot Wear F 675 kω to 120 MΩ kω Desco Measure Temperature Calibration, Indication and Control used with TC Type K F Measure Temperature Calibration, Indication and Control used with TC Type J F Measure Temperature Calibration, Indication and Control used with TC Type T F Measure Temperature Calibration, Indication and Control used with RTD F DC Voltage FO 0 C to 99.9 C 0.27 C Fluke 743B 100 C to C 0.27 C 200 C to C 0.34 C 400 C to C 0.34 C 600 C to C 0.34 C 800 C to C 0.34 C C to C 0.34 C 0 C to 99.9 C 0.24 C 100 C to C 0.24 C 200 C to C 0.25 C 400 C to C 0.25 C 600 C to C 0.25 C 800 C to C 0.25 C C to C 0.25 C -50 C to C 0.3 C 0 C to 99.9 C 0.24 C 100 C to C 0.24 C 150 C to C 0.23 C 200 C to C 0.23 C 300 C to 400 C 0.23 C -50 C to C 0.3 C 0 C to 99.9 C C 100 C to C C 200 C to C 0.11 C 300 C to C 0.11 C 400 C to C 0.12 C 600 C to C 0.13 C 800 C 0.24 C 10 mv mv 90 mv mv Issue: 09/2017 This supplement is in conjunction with certificate #L Page 6 of 22

7 Electrical MEASURED INSTRUMENT, Certificate of Accreditation: Supplement DEVICE SIZE AS AND 0.1 V V Fluke 743B DC Voltage FO 0.9 V V FO Resistance F Current DC F Frequency F 1 V V 9 V V 10 V V 90 V V 30 V V 270 V V 0.1 V V 0.9 V V 1 V V 9 V V 10 V 0.01 V 90 V 0.14 V 30 V 0.06 V 270 V 0.15 V 1 Ω Ω 9 Ω Ω 10 Ω Ω 90 Ω Ω 100 Ω 0.06 Ω 900 Ω 0.14 Ω 1 kω kω 9 kω 0.11 kω 3 ma ma 27 ma ma 10 ma ma 90 ma ma 10 Hz Hz 90 Hz Hz 100 Hz Hz 900 Hz Hz 1 khz khz Issue: 09/2017 This supplement is in conjunction with certificate #L Page 7 of 22

8 Electrical MEASURED INSTRUMENT, Frequency FO Equipment to Source DC Voltage FO Equipment to Source AC Current FO Equipment to Source Resistance FO Equipment to Source Frequency FO DC Voltage FO DEVICE SIZE AS AND 9 khz khz Fluke 743B 5 khz khz 45 khz khz 11 mv mv 99 mv mv 0.11 V V 0.99 V V 1.5 V V 13.5 V V 2.2 ma ma 19.8 ma ma 1.1 Ω Ω 9.9 Ω Ω 11 Ω Ω 99 Ω Ω 0.11 kω kω 0.99 kω kω 1.1 kω kω 7 kω kω 1.09 Hz Hz Hz Hz 10.9 Hz Hz Hz Hz khz khz khz khz 5 khz khz 45 khz khz 0 mv to mv % of reading + 3 µv Fluke 5500A 0 V to V % of reading + 5 µv 0 V to V % of reading + 50 µv 30 V to V % of reading µv 100 V to V % of reading µv Issue: 09/2017 This supplement is in conjunction with certificate #L Page 8 of 22

9 Electrical MEASURED INSTRUMENT, DC Current F Resistance F Certificate of Accreditation: Supplement DEVICE SIZE AS AND 0 ma to ma % of reading µa Fluke 5500A / 50 Turn 0 ma to ma 0.01 % of reading µa Coil 0 ma to ma 0.01 % of reading µa 0 A to A 0.03 % of reading + 44 µa 0 A to 11A 0.06 % of reading µa 10 A to 1 025A 0.25 % of reading A 0 Ω to Ω % of reading Ω Fluke 5500A 11 Ω to Ω % of reading Ω 33 Ω to Ω % of reading Ω 110 Ω to Ω % of reading Ω 330 Ω to kω % of reading Ω 1.1 kω to kω % of reading Ω 3.3 kω to kω % of reading Ω 11 kω to kω % of reading Ω 33 kω to kω % of reading + 6 Ω 110 kω to kω % of reading + 6 Ω 330 kω to MΩ % of reading + 55 Ω 1.1 MΩ to MΩ % of reading + 55 Ω 3.3 MΩ to MΩ 0.06 % of reading Ω 11 MΩ to MΩ 0.1 % of reading Ω 33 MΩ to MΩ 0.5 % of reading Ω 110 MΩ to 330 MΩ 0.5 % of reading Ω At the listed frequencies 10 Hz to 45 Hz 1 mv to mv 0.35 % of reading + 20 µv 45 Hz to 10 khz 1 mv to mv 0.15 % of reading + 20 µv 10 khz to 20 khz 1 mv to mv 0.2 % of reading + 20 µv 20 khz to 50 khz 1 mv to mv 0.25 % of reading + 20 µv 50 khz to 100 khz 1 mv to mv 0.35 % of reading + 33 µv 100 khz to 500 khz 1 mv to mv 1 % of reading + 60 µv Issue: 09/2017 This supplement is in conjunction with certificate #L Page 9 of 22

10 Electrical MEASURED INSTRUMENT, DEVICE SIZE AS AND 10 Hz to 45 Hz 33 mv to mv 0.25 % of reading + 50 µv 45 Hz to 10 khz 33 mv to mv 0.05 % of reading + 20 µv 10 khz to 20 khz 33 mv to mv 0.1 % of reading + 20 µv 20 khz to 50 khz 33 mv to mv 0.16 % of reading + 40 µv 50 khz to 100 khz 33 mv to mv 0.24 % of reading µv 100 khz to 500 khz 33 mv to mv 0.7 % of reading µv 10 Hz to 45 Hz 0.33 V to V 0.15 % of reading µv 45 Hz to 10 khz 0.33 V to V 0.03 % of reading + 60 µv 10 khz to 20 khz 0.33 V to V 0.08 % of reading + 60 µv 20 khz to 50 khz 0.33 V to V 0.14 % of reading µv 50 khz to 100 khz 0.33 V to V 0.24 % of reading µv 100 khz to 500 khz 0.33 V to V 0.5 % of reading µv 45 Hz to 1 khz 33 V to V 0.05 % of reading mv 1 khz to 10 khz 33 V to V 0.08 % of reading + 15 mv 10 khz to 20 khz 33 V to V 0.09 % of reading + 33 mv 45 Hz to 1 khz 330 V to V 0.05 % of reading + 80 mv 1 khz to 5 khz 330 V to V 0.2 % of reading mv 5 khz to 10 khz 330 V to V 0.2 % of reading mv AC Current 10 Hz to 20 Hz ma to ma 0.25 % of reading µa 20 Hz to 45 Hz ma to ma 0.13 % of reading µa 45 Hz to 1 khz ma to ma 0.13 % of reading µa Fluke 5500A Issue: 09/2017 This supplement is in conjunction with certificate #L Page 10 of 22

11 Electrical MEASURED INSTRUMENT, AC Current DEVICE SIZE AS AND 1 khz to 5 khz ma to ma 0.4 % of reading µa 5 khz to 10 khz ma to ma 1.3 % of reading µa AC Current 10 Hz to 20 Hz 0.33 ma to ma 0.2 % of reading µa 20 Hz to 45 Hz 0.33 ma to ma 0.1 % of reading µa 45 Hz to 1 khz 0.33 ma to ma 0.1 % of reading µa 1 khz to 5 khz 0.33 ma to ma 0.2 % of reading µa 5 khz to 10 khz 0.33 ma to ma 0.6 % of reading µa AC Current 10 Hz to 20 Hz 3.3 ma to ma 0.2 % of reading + 3 µa 20 Hz to 45 Hz 3.3 ma to ma 0.1 % of reading + 3 µa 45 Hz to 1 khz 3.3 ma to ma 0.09 % of reading + 3 µa 1 khz to 5 khz 3.3 ma to ma 0.2 % of reading + 3 µa 5 khz to 10 khz 3.3 ma to ma 0.6 % of reading + 3 µa AC Current 10 Hz to 20 Hz 33 ma to ma 0.2 % of reading + 30 µa 20 Hz to 45 Hz 33 ma to ma 0.1 % of reading + 30 µa 45 Hz to 1 khz 33 ma to ma 0.09 % of reading + 30 µa 1 khz to 5 khz 33 ma to ma 0.2 % of reading + 30 µa 5 khz to 10 khz 33 ma to ma 0.6 % of reading + 30 µa AC Current 10 Hz to 45 Hz 0.33 ma to A 0.2 % of reading µa 45 Hz to 1 khz 0.33 ma to A 0.1 % of reading µa 1 khz to 5 khz 0.33 ma to A 0.75 % of reading µa Fluke 5500A Issue: 09/2017 This supplement is in conjunction with certificate #L Page 11 of 22

12 Electrical AC Current Certificate of Accreditation: Supplement AND 45 Hz to 65 Hz 2.2 A to 11 A 0.06 % of reading µa 65 Hz to 500 Hz 2.2 A to 11 A 0.1 % of reading µa 500 Hz to 1 KHz 2.2 A to 11 A 0.33 % of reading µa AC Current F 45 Hz to 65 Hz 10 A to A 0.28 % of reading A 45 Hz to 65 Hz 25 A to A 0.28 % of reading A 45 Hz to 65 Hz 150 A to A 0.28 % of reading A AC Current F 65 Hz to 440 Hz 10 A to A 0.79 % of reading A 65 Hz to 440 Hz 25 A to A 0.79 % of reading A 65 Hz to 440 Hz 150 A to A 0.79 % of reading A Capacitance at the listed frequencies F 50 Hz to Hz 0.33 nf to nf 0.5 % of reading nf 50 Hz to Hz 11 nf to nf 0.25 % of reading nf 50 Hz to Hz 11 nf to nf 0.25 % of reading nf Capacitance at the listed frequencies F 50 Hz to Hz 0.33 µf to nf 0.25 % of reading + 1 nf 50 Hz to Hz 1.1 µf to µf 0.35 % of reading + 3 nf 50 Hz to 400 Hz 3.3 µf to µf 0.35 % of reading + 10 nf 50 Hz to 400 Hz 11 µf to µf 0.4 % of reading + 30 nf 50 Hz to 200 Hz 33 nf to µf 0.5 % of reading nf 50 Hz to 100 Hz 110 nf to µf 0.7 % of reading nf 50 Hz to 100 Hz 330 µf to 1.1 mf 1 % of reading nf Equipment used with Thermocouple Type B F Fluke 5500A Fluke 5500A/50A Turn Coil Fluke 5500A 600 C to 800 C 0.44 C Electrical Simulation of 800 C to C 0.34 C Thermocouples Output Fluke 5500A, AMS C to C 0.3 C 275D.ASTM E C to C 0.33 C Issue: 09/2017 This supplement is in conjunction with certificate #L Page 12 of 22

13 Electrical Equipment used with Thermocouple Type C F Equipment used with Thermocouple Type E F Equipment used with Thermocouple Type J F Equipment used with Thermocouple Type K F Equipment used with Thermocouple Type L F Equipment used with Thermocouple Type N F Equipment used with Thermocouple Type R F AND 0 C to 150 C 0.3 C Electrical Simulation of 150 C to 650 C 0.26 C Thermocouples Output Fluke 5500A, AMS 650 C to C 0.31 C 275D.ASTM E C to C 0.5 C C to C 0.84 C -250 C to -100 C 0.5 C -100 C to -25 C 0.16 C -25 C to 350 C 0.14 C 350 C to 650 C 0.16 C 650 C to C 0.21 C -210 C to -100 C 0.27 C -100 C to -30 C 0.16 C -30 C to 150 C 0.14 C 150 C to 760 C 0.17 C 760 C to C 0.23 C -200 C to -100 C 0.33 C -100 C to -25 C 0.18 C -25 C to 120 C 0.16 C 120 C to C 0.26 C C to C 0.4 C -200 C to -100 C 0.37 C -100 C to 800 C 0.26 C 800 C to 900 C 0.17 C -200 C to -100 C 0.4 C -100 C to -25 C 0.22 C -25 C to 120 C 0.19 C 120 C to 410 C 0.18 C 410 C to C 0.19 C 0 C to 250 C 0.57 C 250 C to 400 C 0.35 C 400 C to C 0.33 C C to C 0.4 C Issue: 09/2017 This supplement is in conjunction with certificate #L Page 13 of 22

14 Electrical Equipment used with Thermocouple Type S F Equipment used with Thermocouple Type T F Equipment used with Thermocouple Type U F Equipment used with RTD Type Pt 395, 100 Ω F Temperature Calibration Equipment used with RTD Type Pt 3 926, 100 Ω F Equipment used with RTD Type Pt 3 916, 100 Ω F Certificate of Accreditation: Supplement AND 0 C to 250 C 0.47 C Electrical Simulation of 250 C to C 0.36 C Thermocouples Output Fluke 5500A, AMS C to C 0.37 C 275D.ASTM E C to C 0.46 C -250 C to -150 C 0.47 C -150 C to 0 C 0.36 C 0 C to 120 C 0.37 C 120 C to 400 C 0.46 C -200 C to 0 C 0.47 C 0 C to 600 C 0.36 C -200 C to -80 C 0.05 C Electrical Simulation of -80 C to 0 C 0.05 C RTD Output Fluke 5500A 0 C to 100 C 0.07 C 100 C to 300 C 0.09 C 300 C to 400 C 0.1 C 400 C to 630 C 0.12 C 630 C to 800 C 0.23 C -200 C to -80 C 0.05 C -80 C to 0 C 0.05 C 0 C to 100 C 0.07 C 100 C to 300 C 0.09 C 300 C to 400 C 0.1 C 400 C to 630 C 0.12 C -200 C to -190 C 0.25 C -190 C to -80 C 0.04 C -80 C to 0 C 0.05 C 0 C to 100 C 0.06 C 100 C to 260 C 0.07 C 260 C to 300 C 0.08 C 300 C to 400 C 0.09 C 400 C to 600 C 0.1 C 600 C to 630 C 0.23 C Issue: 09/2017 This supplement is in conjunction with certificate #L Page 14 of 22

15 Electrical Equipment used with RTD Type Pt Ω F Equipment used with RTD Type Pt 385, 500 Ω F Equipment used with RTD Type Pt 385, Ω F Equipment used with RTD Type Pt Ni 385, 120 Ω F DC Voltage FO AND -200 C to -80 C 0.04 C Electrical Simulation of -80 C to 0 C 0.04 C RTD Output Fluke 5500A 0 C to 100 C 0.04 C 100 C to 260 C 0.05 C 260 C to 300 C 0.12 C 300 C to 400 C 0.13 C 400 C to 600 C 0.14 C 600 C to 630 C 0.16 C -200 C to -80 C 0.04 C -80 C to 0 C 0.05 C 0 C to 100 C 0.05 C 100 C to 260 C 0.06 C 260 C to 300 C 0.08 C 300 C to 400 C 0.08 C 400 C to 600 C 0.09 C 600 C to 630 C 0.11 C -200 C to -80 C 0.03 C -80 C to 0 C 0.03 C 0 C to 100 C 0.04 C 100 C to 260 C 0.05 C 260 C to 300 C 0.06 C 300 C to 400 C 0.07 C 400 C to 600 C 0.07 C 600 C to 630 C 0.23 C -80 C to 0 C 0.08 C 0 C to 100 C 0.08 C 100 C to 260 C 0.14 C 1 mv to 100 mv % of reading µv DMM HP 3458A 100 mv to 1 V % of reading µv 1 V to 10 V % of reading µv 10 V to 100 V % of reading + 30 µv 100 V to V % of reading mv Issue: 09/2017 This supplement is in conjunction with certificate #L Page 15 of 22

16 Electrical DC Voltage F DC Current F DC Current F Resistance F Certificate of Accreditation: Supplement AND Up to 0.5 kv kv High Voltage Digital 0.5 kv to 1 kv kv Meter Haneg HM3676A 1 kv to 2 kv kv 2 kv to 3 kv kv 3 kv to 4 kv 0.05 kv 4 kv to 5 kv kv 5 kv to 8 kv kv 8 kv to 10 kv kv Up to 1 µa % of reading DMM HP 3458A 1 µa to 10 µa % of reading 10 µa to 100 µa % of reading 100 µa to 1 ma % of reading 1 ma to 10 ma % of reading 10 ma to 100 ma % of reading 100 ma to 1 A % of reading DMM HP 3458A 1 A to 3 A 0.12 % of reading A DMM Agilent 34401A Up to 10 Ω % of reading + 50 µω DMM HP 3458A Ω to 100 Ω % of reading µω Ω to 1 kω % of reading µω kω to 10 kω % of reading + 5 mω kω to 100 kω % of reading + 50 mω kω to 1 MΩ % of reading + 2 Ω MΩ to 10 MΩ % of reading Ω MΩ to 100 MΩ 0.05 % of reading + 1 kω MΩ to 1 GΩ 0.5 % of reading + 10 kω At the listed frequencies AC BAND 2 MHz F 1 Hz to 40 Hz Up to 10 mv 0.03 % of reading mv 40 Hz to 1 khz Up to 10 mv 0.02 % of reading mv 1 khz to 20 khz Up to 10 mv 0.03 % of reading mv 20 khz to 50 khz Up to 10 mv 0.1 % of reading mv 50 khz to 100 khz Up to10 mv 0.5 % of reading mv DMM HP 3458A Issue: 09/2017 This supplement is in conjunction with certificate #L Page 16 of 22

17 Electrical AC BAND 2 MHz F Certificate of Accreditation: Supplement AND 100 khz to 300 khz 0 mv to 10 mv 4 % of reading mv AC BAND 2 MHz F 40 Hz to 1 khz 100 mv to 10 V % of reading V 1 khz to 20 khz 100 mv to 10 V % of reading V 20 khz to 50 khz 100 mv to 10 V 0.03 % of reading V 50 khz to 100 khz 100 mv to 10 V 0.08 % of reading V 100 khz to 300 khz 100 mv to 10 V 0.3 % of reading V 300 KHz to 1 MHz 100 mv to 10 V 1 % of reading V 1 MHz to 2 MHz 100 mv to 10 V 1.5 % of reading V 1 Hz to 40 Hz 100 mv to 10 V % of reading V AC BAND 2 MHz F 1 Hz to 40 Hz 10 V to 100 V 0.02 % of reading V 40 Hz to 1 khz 10 V to 100 V 0.02 % of reading V 1 khz to 20 khz 10 V to 100 V 0.02 % of reading V 20 khz to 50 khz 10 V to 100 V % of reading V 50 khz to 100 khz 10 V to 100 V 0.12 % of reading V 100 khz to 300 khz 10 V to 100 V 0.4 % of reading V 300 khz to 1 MHz 10 V to 100 V 1.5 % of reading V AC BAND 2 MHz 1 Hz to 40 Hz 100 V to V 0.04 % of reading V 40 Hz to 1 khz 100 V to V 0.04 % of reading V 1 khz to 20 khz 100 V to V 0.06 % of reading V 20 khz to 50 khz 100 V to V 0.12 % of reading V DMM HP 3458A Issue: 09/2017 This supplement is in conjunction with certificate #L Page 17 of 22

18 Electrical AC BAND 2 MHz AND 50 khz to 100 KHz 100 V to V 0.3 % of reading V AC BAND 2 MHz 45 Hz to 100 khz Up to 10 mv 0.09 % of reading mv 100 khz to 1 MHz Up to 10 mv 1.2 % of reading mv 1 MHz to 4 MHz Up to 10 mv 7 % of reading mv 4 MHz to 8 MHz Up to 10 mv 20 % of reading mv AC BAND 2 MHz 45 Hz to 100 KHz 100 mv to 10 V 0.09 % of reading V 100 khz to 1 MHz 100 mv to 10 V 2 % of reading V 1 MHz to 4 MHz 100 mv to 10 V 4 % of reading V 4 MHz to 8 MHz 100 mv to 10 V 4 % of reading V 8 MHz to 10 MHz 100 mv to 10 V 15 % of reading V 45 Hz to 100 KHz 100 V to 100 V 0.12 % of reading V 45 Hz to 100 KHz 100 V to V 0.3 % of reading + 1V AC Current 10 Hz to 20 Hz Up to 100 µa 0.4 % of reading µa 20 Hz to 45 Hz Up to 100 µa 0.15 % of reading µa 45 Hz to 100 Hz Up to 100 µa 0.06 % of reading µa 100 Hz to 5 khz Up to 100 µa 0.06 % of reading µa AC Current 10 Hz to 20 Hz 1 ma to 100 ma 0.4 % of reading ma 20 Hz to 45 Hz 1 ma to 100 ma 0.15 % of reading ma DMM HP 3458A Issue: 09/2017 This supplement is in conjunction with certificate #L Page 18 of 22

19 Electrical AC Current At the listed frequencies AND 100 Hz to 5 khz 1 ma to 100 ma 0.03 % of reading ma 5 khz to 20 khz 1 ma to 100 ma 0.06 % of reading ma 20 khz to 50 khz 1 ma to 100 ma 0.4 % of reading ma 50 khz to 100 khz 1 ma to 100 ma 0.55 % of reading ma AC Current At the listed frequencies 10 Hz to 20 Hz 100 ma to 1 A 0.4 % of reading ma 20 Hz to 45 Hz 100 ma to 1 A 0.16 % of reading ma 45 Hz to 100 Hz 100 ma to 1 A 0.08 % of reading ma 100 Hz to 5 KHz 100 ma to 1 A 0.1 % of reading ma 5 KHz to 20 KHz 100 ma to 1 A 0.3 % of reading ma 20 KHz to 50 KHz 100 ma to 1A 1 % of reading ma Oscilloscope (Amplitude Square Wave Signal) F 50 Ω Load 1 mv to 6.6 V p-p % of reading + 40 µv 10 Hz to 10 khz 1 MΩ Load 1 mv to 130 V p-p 0.05 % of reading + 5 µv 10 Hz to 10 khz Oscilloscope 50 khz to 100 MHz 3.5 % of reading µv (Sine Wave Function) 100 MHz to 300 MHz 4 % of reading µv 5 mv to 5.5 V F 300 MHz to 600 MHz 6 % of reading µv Frequency F 50 khz to 600 MHz 1 ppm Oscilloscope 2 ns to 100 ns 2.5 ppm + 5 µhz (Time Marker Function) 50 ms to 5 s 50 Ω F Oscilloscope (Wave Generator) F 50 Ω 1.8 m V to 2.5 V p-p 3 % of p-p Output µv 1 MΩ 1.8 m V to 55 V p-p 3 % of p-p Output µv DMM HP 3458A Fluke 5800A Issue: 09/2017 This supplement is in conjunction with certificate #L Page 19 of 22

20 Electrical Oscilloscope (Pulse Generator) 50 Ω F Oscilloscope (Amplitude DC Signal) 1 MΩ F Oscilloscope (Time Marker Function) 50 Ω F Oscilloscope (Sine Wave Function) F 0.12 mv to 100 V AND 1.8 mv to 2.5 V p-p 3 % of p-p output µv Fluke 5800A 0.12 mv to 60 V 0.5 % of reading Iwatsu SC mv to 100 V 0.5 % of reading 0.1 µs to 2s 0.05 % of reading 1 Hz to Hz µhz 1 khz to 10 khz 6.2 µhz 10 khz to 100 khz 6.2 µhz 100 khz to 1 MHz 6.2 Hz Acoustic AND Sound Level Meter F 94 db to 114 db 1 db Sound Level Calibrator Chemical AND ph Meter F 4.01 ph ph Buffer Solutions ph 7.01 ph ph Comparison & ph Simulator ph ph Conductivity Meter F 98.4 µs/cm 2.2 µs/cm Conductivity Standard 998 µs/cm 4.7 µs/cm Solution Comparison µs/cm 4.7 µs/cm Issue: 09/2017 This supplement is in conjunction with certificate #L Page 20 of 22

21 Mechanical AND Pressure Gauges F 1 psi to 5 00 psi 0.09 % of reading Pressure Calibrator w/ Module HQS psi to psi 0.09 % of reading Pressure Calibrator w/ Module HQS psi to psi 0.09 % of reading Pressure Calibrator w/ Module HQS psi to psi 0.07 % of reading Pressure Calibrator w/ Module HQS Pressure Gauge F 1 psi to 300 psi % of reading Process Calibrator Druck DPI 610 Relief Valves & Pressure Gauge F Indirect Verification of Rockwell Hardness Tester HRB F Indirect Verification of Rockwell Hardness Tester HRC F Torque Wrench & Screwdriver F Torque Analyzer & Transducer F 1 psi to psi 0.11 % of reading Dead Weight Tester Omega DWT1305D 20 HRB to 59 HB 0.35 HRB Test Block 60 HRB to 89 HRB 0.31 HRB ASTM E HRB to 100 HRB 0.43 HRB 20 HRC to 39 HRC 0.38 HRC 40 HRC to 59 HRC 0.32 HRC 60 HRC to 70 HRC 0.31 HRC 10 oz in to 100 oz in (0.07 N m to 0.7 N m) 30 lb in to 300 lb in 0.3 % of reading (3.39 N m to 33.9 N m) 25 lb ft to 250 lb ft 0.8 % of reading (33.9 N m to N m) 1 lb in to 300 lb in (0.11 N m to 33.9 N m) 300 lb in to lb in 1 % of reading % of reading Torque Transducer Sturtevant Richmont System 4 /Torque Tester CDI I- ETT and Master Weights 0.02% of reading Torque Calibration Wheel W/Class F Weights (33.9 N m to N m) Vaccum Gauge F 0 in Hg to -30 in Hg 2.7 % of reading Process Calibrator Druck DPI The CMC (Calibration and Measurement Capability) stated for calibrations included on this scope of accreditation represents the smallest measurement uncertainty attainable by the laboratory when performing a more or less routine calibration of a nearly ideal device under nearly ideal conditions. It is typically expressed at a confidence level of 95 % using a coverage factor k (usually equal to 2). The actual measurement uncertainty associated with a specific calibration performed by the laboratory will typically be larger than the CMC for the same calibration since capability and performance of the device being calibrated and the conditions related to the calibration may reasonably be expected to deviate from ideal to some degree. Issue: 09/2017 This supplement is in conjunction with certificate #L Page 21 of 22

22 2. The laboratories range of calibration capability for all disciplines for which they are accredited is the interval from the smallest calibrated standard to the largest calibrated standard used in performing the calibration. The low end of this range must be an attainable value for which the laboratory has or has access to the standard referenced. Verification of an indicated value of zero in the absence of a standard is common practice in the procedure for many calibrations but by its definition it does not constitute calibration of zero capacity. 3. The presence of a superscript F means that the laboratory performs calibration of the indicated parameter at its fixed location. Example: Outside Micrometer F would mean that the laboratory performs this calibration at its fixed location. 4. The presence of a superscript O means that the laboratory performs calibration of the indicated parameter onsite at customer locations. Example: Outside Micrometer O would mean that the laboratory performs this calibration onsite at the customer s location. 5. Measurement uncertainties obtained for calibrations performed at customer sites can be expected to be larger than the measurement uncertainties obtained at the laboratories fixed location for similar calibrations. This is due to the effects of transportation of the standards and equipment and upon environmental conditions at the customer site which are typically not controlled as closely as at the laboratories fixed location. 6. The term L represents length in inches or millimeters as appropriate to the uncertainty statement. 7. The term Wt represents weight in pounds or grams (including SI multiple and submultiple units) appropriate to the uncertainty statement. 8. The term X proceeded by a number represents the number of times a lense system magnifies an image relative to its actual size. CMC stated as % of magnification represents the CMC of magnification expressed as a percentage of the total magnification. Issue: 09/2017 This supplement is in conjunction with certificate #L Page 22 of 22