Certificate of Accreditation

Transcription

1 PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: HQ: Calmet Industrial S.A. de C.V Lázaro Cárdenas No. 1308, Col. Niño Artillero Monterrey, Nuevo León, México C.P SITE: (Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognized International Standard: ISO/IEC 17025:2005 This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (as outlined by the joint ISO-ILAC-IAF Communiqué dated April 2017): Dimensional, Mechanical, Thermodynamic, Acoustic, Optical, Chemical, Time & Frequency, Mass, Force and Weighing Devices and Calibration (As detailed in the supplement) Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate. This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the Accreditation body s duty to observe and comply with the said rules. For PJLA: Initial Accreditation Date: Issue Date: Expiration Date: February 11, 2011 October 25, 2017 December 31, 2019 Revision Date: Accreditation No.: Certificate No.: Tracy Szerszen President/Operations Manager Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver, Suite 1325 Troy, Michigan November 29, L R1 The validity of this certificate is maintained through ongoing assessments based on a continuous accreditation cycle. The validity of this certificate should be confirmed through the PJLA website: Page 1 of 18

2 Dimensional Outside Micrometers FO 1 mm to mm 1.8 μm NMX-CH-099-IMNC-2005 Gage Block Sets Caliper FO 1 mm to mm 9.6 μm NMX-CH-002-IMNC-2004 Gage Block Sets Indicator FO 0.01 mm to 50.8 mm 0.76 μm NMX-CH-36, JIS B-7503 Dial Gauge Calibration Tester Rules FO 3.9 mm to mm 0.35 mm JIS B 7516 Standard Steel Ruler, Microscope Surface Plates Repeat Measurement O Optical Comparator Length O 50.8 μm 1.9 μm JIS B 7513 Repeat O Meter X: 200 mm 3.3 μm JIS B 7184 Standard Glass Y: 200 mm 3.3 μm Scale Optical Comparator 0 to º Angle Block Angularity O Height Gage FO 1 mm to mm 11 μm JIS B 7517 Gage Block Sets Pin Gages F mm to 76.2 mm 1.4 μm ASME B Micrometer Thread Plug Gage Major Diameter F 0-80 to µm ANSI/ASME B1.2 Conventional Micrometer Ultrasonic Thickness FO mm to mm 2 μm ASTM E 797 Thickness Gages Thread Plug Gage Pitch Diameter F 0-80 to μm ANSI/ASME B1.2 Wires and digital Micrometer Measuring Tape F m to 10 m 0.48 mm JIS B 7512 Standard Steel Ruler Thickness Gages FO mm to 1 mm ( L) µm Micrometer Depth Micrometer FO 2.5 mm to 150 mm ( x 10-4 L) µm Block Gages System of Vision FO X axis Y axis 200 mm 3.3 μm 200 mm 3.3 μm JIS B 7153 Standard Glass Scale Angle Block Protector Angle Meter FO 0º to 90º 0.38º Angle Blocks Inside Micrometers FO 25 mm to 600 mm 1.8 µm NMX-CH-093-IMNC-2005 Caliper Checks Gages Blocks F mm to 100 mm (9.8 x x 10-3 L) µm Block Gages, Edmunds, 0.05 in to 20 in ( L) μin Twin Head Comparator Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 2 of 18

3 Dimensional RANGE (AND SPECIFICATION WHERE ) Roughness Meter Ra F 0.21 µm to 3 µm 0.07 µm ISO 4287 Ra Roughness Master CMM Calibration and Volumetric Inspection O 300 mm to mm ( L) μm ISO Glass Blocks Sphere Heck Master Bore Gage F 6 mm to 100 mm 2.6 μm JIS 7515 Radius Gage FO 0.4 mm to 25.4 mm 5 μm ISO Optical Comparator Ring Gages F 1 mm to 205 mm 6.3 µm Trimos Tels Sieve F 0.01 mm to 16 mm 4.3 μm Vision System Machine Mechanical Torque Meter Clockwise and Counterclockwise F Pressure Gauge and Transducer FO Indirect Verifications Hardness tester HRC FO Indirect Verifications Hardness tester HRB FO DEVICE SIZE AS 0.5 N m to 5.65 N m N m ISO 6789: N m to 56 N m N m NMX-CH-6789-IMNC Torque Tester Mountz 81.3 N m to 813 N m 1.1 N m (BMX50I, BMX500I, 8.4 N m to 84 N m 0.58 N m BMX7501) CDI (6004-F-DTT) to kpa 5.2 x 10-2 kpa Fluke G to kpa 0.52 kpa NOM-013-SCFI to kpa 3.4 kpa Fluke 700P27EX to kpa 35 kpa BETA BGPIR-PRO-01K -85 kpa to -8.5 kpa 2 Pa Fluke 700 P31 Fluke 718 1G, G 20 HRC to 30 HRC 0.43 HRC ISO ASTME 31 HRC to 59HRC 0.41 HRC Test Blocks 60 HRC to 70 HRC 0.41 HRC 40 HRB to 59 HRB 0.84 HRB 60 HRB to 79 HRB 0.84 HRB 80 HRB to 100 HRB 0.66 HRB Hygro-Thermometer F 20 RH to 95 RH 1.9 RH Hygro-Thermometer Brand Vaisala Leak Test FO L/min to 0.2 L/min L/min Furness Controls (Res.= L/min) Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 3 of 18

4 Mechanical Direct Verification of Durometer Hardness Tester Type A, C, D FO DEVICE SIZE AS 2.46 mm to 2.54 mm 8 μm System Vision ASTMD-2240 Grometry of the Indentor FO 8 μm System Vision Durometer Indentor Spring Type A FO Durometer Indentor Spring Type C and D FO 0.55 N to 8.05 N 4.45 N to N 1.2 N 1.2 N Electronic Balance Accelerometer F 10.2 m/s to 30 m/s 0.34 m/s ISO Pipette F 10 µl to 100 µl 0.33 µl Analytical Balance 20 µl to 200 µl 0.33 µl 100 µl to 200 µl 0.33 µl 100 µl to µl 0.33 µl 500 µl to µl 0.33 µl µl to µl 0.33 µl µl to µl 0.33 µl Volumetric Flask F 5 ml to ml 0.33 ml Picnometer F 10 ml to 500 ml 0.33 ml Burette F 5 ml 0.33 ml 10 ml 0.33 ml 25 ml 0.33 ml 50 ml 0.33 ml 100 ml 0.33 ml 250 ml 0.33 ml 500 ml 0.33 ml ml 0.33 ml Probette F 5 ml 0.33 ml 10 ml 0.33 ml 25 ml 0.33 ml 50 ml 0.33 ml 100 ml 0.33 ml Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 4 of 18

5 Mechanical Probette F 250 ml 0.33 ml Analytical Balance 500 ml 0.33 ml ml 0.33 ml ml 0.33 ml Densimeter F 0.6 kg/m 3 to 1.3 kg/m kg/m 3 Thermodynamic D Bimetallic Thermometers FO 0 C to 500 C 0.23 C NOM-011-SCFI Glass Thermometers F 0 C to 300 C 1.2 C Reference Temperature Calibrator. RTD 100 Ω Dry Glass Thermal Chamber O -70 C to 300 C 0.23 C Indicator RTD 100 Ω Thermal Oven O 50 C to 500 C 0.23 C Digital Thermometer F -20 C to 400 C 0.2 C Digital Infrared Thermometer FO Acoustic Dry Block Calibrator Hart Scientific Model ºC to 500 ºC 1.2 ºC Black Body Source Acoustical Measuring FO 94 db 1.1 db Acoustical Calibrator 114 db 1.1 db 1kHz Optical Refractometers F 0 Bx to 60 Bx 0.21 Bx R Bx Standards Traceable NIST and PTB, Merck Millipore Light Meters F 120 lx to lx 1 % of reading Light Meter Master Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 5 of 18

6 Chemical ph Meter Fixed point FO 4 ph ph ph Buffer Solutions 7 ph 0.012H 10 ph ph Conductivity Meter FO 84 µs 0.94 µs Conductivity Buffer µs 6.5 µs Solutions µs 6 µs Viscometers - Kinematic 120 mm 2 /s (cst) 0.34 mm 2 /s (cst) Cannon Certified Viscosity Viscosity (Zhan) 2/3/4, 230 mm 2 /s (cst) Reference Standard Ford 3, 4) (C60, C100) 25 C Viscometers - Dynamic mpa s 0.66 mpa s Cannon Certified Viscosity Viscosity F mpa s 0.89 mpa s Reference Standard (S200, RT500) 25 C Turbidimeter FO 0.1 NTU 0.01 NTU Turbidity Calibration 1 NTU 0.1 NTU Standard 10 NTU 1 NTU 20 NTU 2 NTU 100 NTU 10 NTU 200 NTU 20 NTU 800 NTU 80 NTU NTU 160 NTU Alcohol Meter F Up to 0.4 BAC % BAC Alcohol Meter Master Combustion Analyzer F 51 µmol/mol (CO) 1.02 µmol/mol (CO) PRAXAIR Certified Explosimeter F 100 µmol/mol 0.05 µmol/mol Standard Methane Explosimeter F 26 µmol/mol 0.05 µmol/mol Hydrogen Sulfide Explosimeter F Butane 109 µmol/mol 0.05 µmol/mol Time and Frequency Stopwatch Timer FO s 0.83 s/day Stop Watch Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 6 of 18

7 Mass, Force, and Weighing Devices Analytical Balance FO Balances O Weights Class M1, M2, M3 F Weights Class M1, M2, M3 F Weights Class F2, M1, M2, M3 F Weights Class M2, M3 F Weights Class M1, M2, M3 F Force Compression and Tension O 0.1 g to 220 g (Res.= g) mg NOM-010-SCFI Class E2 Weight 0.2 g to 500 g 0.82 mg (Res.= g) 200 g to 5 kg 0.82 g NOM-010-SCFI (Res.= 1 g) Class E2, F2, F1 Weight 4 kg to 500 kg 16 g NOM-010-SCFI (Res.= 20 g) Class M1, F1 Weight 20 kg to kg 170 g NOM-010-SCFI (Res.= 0.2 kg) Class M1, M2 Weight 1 g 0.33 mg NOM-038-SCFI 2 g 0.4 mg Mass Set Class E2 5 g 0.53 mg 10 g 0.66 mg 20 g 0.83 mg 50 g 1 mg 100 g 1.7 mg 200 g 3.33 mg g 17 mg NOM-038-SCFI, Mass Set Class F g 10 mg NOM-038-SCFI Mass Set Class F g 270 mg NOM-038-SCFI g 540 mg Mass Set Class M g 340 mg NOM-038-SCFI Mass Set Class F2 44 N to 444 N 0.21 % of reading NMX-CH IMNC 44 N to 4.44 kn 0.5 % of reading Strainsense SST101ULP, SST102ULP, 4.44 kn to kn 0.6 % of reading SST103ULP, SST104UF kn to kn 0.3 % of reading Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 7 of 18

8 DC Voltage FO 1 mv to mv % of reading mv Agilent 34401A 100 mv to 0.99 V % of reading + 7 V Multimeter 1 V to 9.99 V % of reading + 50 V 10 V to V % of reading mv 100 V to V % of reading + 10 mv 3 Hz to 5 Hz 10 mv to 100 mv 1.1 mv 5 Hz to 10 Hz 10 mv to 100 mv 0.39 mv 10 Hz to 20 khz 10 mv to 100 mv 0.1 mv 20 khz to 50 khz 10 mv to 100 mv 0.16 mv 50 khz to 100 khz 10 mv to 100 mv 0.68 mv 100 khz to 300 khz 10 mv to 100 mv 4.5 mv 3 Hz to 5 Hz 100 mv to 1 V V 5 Hz to 10 Hz 100 mv to 1 V V 10 Hz to 20 khz 100 mv to 1 V V 20 khz to 50 khz 100 mv to 1 V V 50 khz to 100 khz 100 mv to 1 V V 100 khz to 300 khz 100 mv to 1 V V 3 Hz to 5 Hz 1 V to 750 V 7.8 V Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 8 of 18

9 5 Hz to 10 Hz 1 V to 750 V 2.9 V 10 Hz to 20 khz 1 V to 750 V 0.68 V 20 khz to 50 khz 1 V to 750 V 1.2 V 50 khz to 100 khz 1 V to 750 V 5.1 V 100 khz to 300 khz 1 V to 750 V 34 V AC Current 3 Hz to 5 Hz 1mA to A A 5 Hz to 10 Hz 1m A to A A 10 Hz to 5 khz 1m A to A A AC Current 3 Hz to 5 Hz 1 A to 3 A A 5 Hz to 10 Hz 1 A to 3 A A 10 Hz to 5 khz 1 A to 3 A A Resistance FO Resistance 100 mv to 750 V FO DC Voltage FO 0.0 Ω to 100 Ω 16 mω 100 Ω to Ω 130 mω 1 kω to 10 kω 1.3 Ω 10 kω to 100 kω 13 Ω 100 kω to 1 MΩ 130 Ω 1 MΩ to 10 MΩ 4.8 Ω/kΩ 10 MΩ to 100 MΩ 0.93 kω/mω Agilent 34401A Multimeter 3 Hz to 5 Hz 0.56 % of reading Agilent 34401A 5 Hz to 10 Hz 0.67 % of reading Multimeter 10 Hz to 40 Hz 0.9 % of reading 40 Hz to 300 khz 0.9 % of reading 33 mv to 330 mv % of reading + 57 µv Fluke 5500A 0.33 V to 3.3 V % of reading µv Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 9 of 18

10 DC Voltage FO DC Current FO 3.3 V to 33 V % of reading mv Fluke 5500A 33 V to 330 V % of reading + 56 mv 330 V to V % of reading mv 0.33 ma to 3.3 ma 0.47 μa 3.3 ma to 33 ma 4.1 μa 33 ma to 330 ma 42 μa 330 ma to 2.2 A 820 μa 2.2 A to 11 A μa 10 Hz to 45 Hz 1 mv to mv 200 μv 45 Hz to 10 khz 1 mv to mv 160 μv 10 khz to 20 khz 1 mv to mv 170 μv 20 khz to 50 khz 1 mv to mv 200 μv 50 khz to 100 khz 1 mv to mv 230 μv 100 khz to 500 khz 1 mv to mv 460 μv 10 Hz to 45 Hz 33 mv to mv 960 μv 45 Hz to 10 khz 33 mv to mv 260 μv 10 khz to 20 khz 33 mv to mv 350 μv 20 khz to 50 khz 33 mv to mv 680 μv 50 khz to 100 khz 33 mv to mv μv 100 khz to 500 khz 33 mv to mv μv 10 Hz to 45 Hz 0.33 V to V 10 mv 45 Hz to 10 khz 0.33 V to V 19 mv 10 khz to 20 khz 0.33 V to V 3 mv 20 khz to 50 khz 0.33 V to V 10 mv Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 10 of 18

11 50 khz to 100 khz 0.33 V to V 10 mv 100 khz to 500 khz 0.33 V to V 23 mv 10 Hz to 45 Hz 3.3 V to V 60 mv 45 Hz to 10 khz 3.3 V to V 20 mv 10 khz to 20 khz 3.3 V to V 30 mv 20 khz to 50 khz 3.3 V to V 80 mv 50 khz to 100 khz 3.3 V to V 190 mv 45 Hz to 1 khz 33 V to V 580 mv 1 khz to 10 khz 33 V to V 300 mv 10 khz to 20 khz 33 V to V mv 45 Hz to 1 khz 330 V to V mv 1 khz to 10 khz 330 V to V mv AC Current 10 Hz to 20 Hz ma to ma 1.5 µa 20 Hz to 45 Hz ma to ma 1.3 µa 45 Hz to 1 khz ma to ma 1.3 µa 1 khz to 5 khz ma to ma 1.9 µa 5 khz to 10 khz ma to ma 4.4 µa AC Current 10 Hz to 20 Hz 0.33 ma to ma 14 µa 20 Hz to 45 Hz 0.33 ma to ma 12 µa Fluke 5500A Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 11 of 18

12 AC Current 45 Hz to 1 khz 0.33 ma to ma 12 µa 1kHz to 5 khz 0.33 ma to ma 14 µa 5 khz to 10 khz 0.33 ma to ma 23 µa AC Current 10 Hz to 20 Hz 3.3 ma to ma 87 µa 20 Hz to 45 Hz 3.3 ma to ma 37 µa 45 Hz to 1 khz 3.3 ma to ma 35 µa 1 khz to 5 khz 3.3 ma to ma 71 µa 5 khz to 10 khz 3.3 ma to ma 210 µa AC Current 10 Hz to 20 Hz 33 ma to ma 700 µa 20 Hz to 45 Hz 33 ma to ma 380 µa 45 Hz to 1 khz 33 ma to ma 350 µa 1 khz to 5 khz 33 ma to ma 700 µa 5 khz to 10 khz 33 ma to ma µa AC Current 10 Hz to 45 Hz 0.33 to A 4.8 ma 45 Hz to 1 khz 0.33 to A 2.6 ma AC Current 45 Hz to 65 Hz 2.2 A to 11 A 14 ma 65 Hz to 500 Hz 2.2 A to 11 A 17 ma 500 Hz to 1 khz 2.2 A to 11 A 40 ma Resistance FO 1.1 Ω to 11 Ω Ω 11 Ω to 33 Ω Ω 33 Ω to 110 Ω Ω Fluke 5500A Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 12 of 18

13 DEVICE SIZE AS 110 Ω to 330 Ω 0.13 Ω Fluke 5500A Resistance FO 0.33 kω to 1.1 kω 0.18 Ω Resistance FO Capacitance FO (Hipot) FO DC Voltage (Hipot) FO 1.1 kω to 3.3 kω 0.42 Ω 3.3 kω to 11 kω 1.9 Ω 11 kω to 33 kω 4.2 Ω 33 kω to 110 kω 21 Ω 110 kω to 330 kω 53 Ω 330 kω to 1.1 MΩ 260 Ω 1.1 MΩ to 3.3 MΩ 640 Ω 3.3 MΩ to 11MΩ 8.3 kω 11 MΩ to 33 MΩ 39 kω 33 MΩ to 110 MΩ 650 kω 110 MΩ to 330 MΩ 2 MΩ 0.33 nf to nf nf 0.5 nf to nf nf 1.1 nf to nf nf 3.3 nf to nf nf 11 nf to nf 0.22 nf 33 nf to nf 0.44 nf 110 nf to nf 1.5 nf 0.33 μf to μf 4.4 nf 1.1 μf to μf 17 nf 3.3 μf to μf 56 nf 11 μf to μf 190 nf 33 μf to μf 760 nf 110 μf to μf 3.1 µf 330 μf to 1.1 mf 14 µf 1 kv to 6 Kv 0.6 kv Multimeter High Voltage 6 kv to 10 Kv 1 kv Probe 10 kv to 25 kv 2.5 kv 1 kv to 6 kv 0.24 kv 6 kv to 10 kv 0.4 kv 10 kv to 35 kv 1.4 kv Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 13 of 18

14 Thermocouple Type B FO Thermocouple Type C FO Thermocouple Type E FO Thermocouple Type J FO Thermocouple Type K FO Thermocouple Type L FO Thermocouple Type N FO 600 ºC to 800 ºC 0.46 ºC Simulation of 800 ºC to ºC 0.46 ºC Thermocouple Output Fluke 5500A ºC to ºC 0.33 ºC ºC to ºC 0.35 ºC 0 ºC to 150 ºC 0.33 ºC 150 ºC to 650 ºC 0.29 ºC 650 ºC to ºC 0.33 ºC ºC to ºC 0.52 ºC ºC to ºC 0.85 ºC -250 ºC to -100 ºC 0.52 ºC -100 ºC to -25 ºC 0.19 ºC -25 ºC to 350 ºC 0.19 ºC 350 ºC to 650 ºC 0.2 ºC 650 ºC to 1000 ºC 0.25 ºC -210 ºC to -100 ºC 0.3 ºC -100 ºC to -30 ºC 0.3 ºC -30 ºC to 150 ºC 0.19 ºC 150 ºC to 760 ºC 0.21 ºC 760 ºC to ºC 0.26 ºC -200 ºC to -100 ºC 0.36 ºC -100 ºC to -25 ºC 0.22 ºC -25 ºC to 120 ºC 0.23 ºC 120 ºC to ºC 0.29 ºC ºC to ºC 0.42 ºC -200 ºC to -100 ºC 0.39 ºC -100 ºC to 800 ºC 0.29 ºC 800 ºC to 900 ºC 0.21 ºC -200 ºC to -100 ºC 0.42 ºC -100 ºC to -25 ºC 0.24 ºC -25 ºC to 120 ºC 0.22 ºC 120 ºC to 410 ºC 0.22 ºC 410 ºC to ºC 0.3 ºC Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 14 of 18

15 Thermocouple Type R FO Thermocouple Type S FO Thermocouple Type T FO Thermocouple Type U FO RTD Pt 385, 100 Ω RTD Pt 3 926, 100 Ω RTD Pt 3 916, 100 Ω 0 ºC to 250 ºC 0.58 ºC Simulation of 250 ºC to 400 ºC 0.58 ºC Thermocouple Output Fluke 5500A 400 ºC to ºC 0.35 ºC ºC to ºC 0.42 ºC 0 ºC to 250 ºC 0.49 ºC 250 ºC to ºC 0.38 ºC ºC to ºC 0.39 ºC ºC to ºC 0.48 ºC -250 ºC to -150 ºC 0.64 ºC -150 ºC to 0 ºC 0.27 ºC 0 ºC to 120 ºC 0.19 ºC 120 ºC to 400 ºC 0.19 ºC -200 ºC to 0 ºC 0.57 ºC 0 ºC to 600 ºC 0.3 ºC -200 ºC to -80 ºC 0.05 ºC Simulation of -80 ºC to 0 ºC 0.05 ºC RTD Output Fluke 5500A 0 ºC to 100 ºC 0.07 ºC 100 ºC to 300 ºC 0.09 ºC 300 ºC to 400 ºC 0.1 ºC 400 ºC to 630 ºC 0.12 ºC 630 ºC to 800 ºC 0.23 ºC -200 ºC to -80 ºC 0.05 ºC -200 ºC to -80 ºC 0.05 ºC -80 ºC to 0 ºC 0.05 ºC 0 ºC to 100 ºC 0.07 ºC 100 ºC to 300 ºC 0.09 ºC 300 ºC to 400 ºC 0.1 ºC 400 ºC to 630 ºC 0.12 ºC -200 ºC to -190 ºC 0.25 ºC -190 ºC to -80 ºC 0.04 ºC Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 15 of 18

16 RTD Pt 3916, 100 Ω FO RTD Pt 385, 100 Ω FO RTD Pt 3 926, 100 Ω FO RTD Pt 385, 500 Ω FO RTD Pt 385, Ω FO -80 ºC to 0 ºC 0.05 ºC Simulation of 0 ºC to 100 ºC 0.06 ºC RTD Output Fluke 5500A 100 ºC to 260 ºC 0.07 ºC 260 ºC to 300 ºC 0.08 ºC 300 ºC to 400 ºC 0.09 ºC 400 ºC to 600 ºC 0.1 ºC 600 ºC to 630 ºC 0.23 ºC -200 ºC to -80 ºC 0.25 ºC -80 ºC to 0 ºC 0.04 ºC 0 ºC to 100 ºC 0.06 ºC 100 ºC to 260 ºC 0.07 ºC 260 ºC to 300 ºC 0.08 ºC 300 ºC to 400 ºC 0.09 ºC 400 ºC to 600 ºC 0.1 ºC -200 ºC to -80 ºC 0.23 ºC -200 ºC to -80 ºC 0.04 ºC -80 ºC to 0 ºC 0.05 ºC 0 ºC to 100 ºC 0.05 ºC 100 ºC to 260 ºC 0.06 ºC 260 ºC to 300 ºC 0.08 ºC 300 ºC to 400 ºC 0.08 ºC 400 ºC to 600 ºC 0.09 ºC 600 ºC to 630 ºC 0.11 ºC -200 ºC to -80 ºC 0.03 ºC -80 ºC to 0 ºC 0.03 ºC 0 ºC to 100 ºC 0.04 ºC 100 ºC to 260 ºC 0.05 ºC 260 ºC to 300 ºC 0.06 ºC 300 ºC to 400 ºC 0.07 ºC 400 ºC to 600 ºC 0.07 ºC 600 ºC to 630 ºC 0.23 ºC Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 16 of 18

17 RTD Pt 385, 120 Ω (Ni 120) FO RTD CU 427, 10 Ω FO -80 ºC to 0 ºC 0.08 ºC Simulation of 0 ºC to 100 ºC 0.08 ºC RTD Output Fluke 5500A 100 ºC to 260 ºC 0.14 ºC -100 ºC to 260 ºC 0.3 ºC 1. The CMC (Calibration and Measurement Capability) stated for calibrations included on this scope of accreditation represents the smallest measurement uncertainty attainable by the laboratory when performing a more or less routine calibration of a nearly ideal device under nearly ideal conditions. It is typically expressed at a confidence level of 95 % using a coverage factor k (usually equal to 2). The actual measurement uncertainty associated with a specific calibration performed by the laboratory will typically be larger than the CMC for the same calibration since capability and performance of the device being calibrated and the conditions related to the calibration may reasonably be expected to deviate from ideal to some degree. 2. The laboratories range of calibration capability for all disciplines for which they are accredited is the interval from the smallest calibrated standard to the largest calibrated standard used in performing the calibration. The low end of this range must be an attainable value for which the laboratory has or has access to the standard referenced. Verification of an indicated value of zero in the absence of a standard is common practice in the procedure for many calibrations but by its definition it does not constitute calibration of zero capacity. 3. The presence of a superscript F means that the laboratory performs calibration of the indicated parameter at its fixed location. Example: Outside Micrometer F would mean that the laboratory performs this calibration at its fixed location. 4. The presence of a superscript O means that the laboratory performs calibration of the indicated parameter onsite at customer locations. Example: Outside Micrometer O would mean that the laboratory performs this calibration onsite at the customer s location. 5. The presence of a superscript FO means that the laboratory performs calibration of the indicated parameter both at its fixed location and onsite at customer locations. Example: Outside Micrometer FO would mean that the laboratory performs this calibration at its fixed location and onsite at customer locations. 6. Measurement uncertainties obtained for calibrations performed at customer sites can be expected to be larger than the measurement uncertainties obtained at the laboratories fixed location for similar calibrations. This is due to the effects of transportation of the standards and equipment and upon environmental conditions at the customer site which are typically not controlled as closely as at the laboratories fixed location. Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 17 of 18

18 7. The term L represents length in inches or millimeters as appropriate to the uncertainty statement. 8. The term T represents temperature in ºC or ºF as appropriate to the uncertainty statement. 9. The term T represents torque in N m (including SI multiple and submultiple units) for the international system of units (the SI) or ozf in, lbf in and lbf ft for the USC system of units. 10. The term Wt represents weight in pounds or grams (including SI multiple and submultiple units) appropriate to the uncertainty statement. Issue: 10/2017 This supplement is in conjunction with certificate #L R1 Page 18 of 18