Certificate of Accreditation

Size: px
Start display at page:

Download "Certificate of Accreditation"

Transcription

1 PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognized International Standard: ISO/IEC 17025:2005 This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (as outlined by the joint ISO-ILAC-IAF Communiqué dated January 2009): Laboratory and Field Calibration of Dimensional, Electrical, Mechanical, Mass, Force, Weighing Devices, Thermodynamic, Time and Frequency Instrumentation (As detailed in the supplement) Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate. This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the Accreditation body s duty to observe and comply with the said rules. For PJLA: Initial Accreditation Date: Issue Date: Expiration Date: June 17, 2003 June 6, 2015 June 30, 2017 Tracy Szerszen President/Operations Manager Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver, Suite 1325 Troy, Michigan Accreditation No: Certificate No: L The validity of this certificate is maintained through ongoing assessments based on a continuous accreditation cycle. The validity of this certificate should be confirmed through the PJLA website: Page 1 of 13

2 Dimensional DEVICE SIZE AS Micrometers FO 0.5 mm to mm (0.02 in to 36 in) ( L) µm ( L) µin Calipers FO 0.5 mm to mm ( L) µm (0.02 in to 36 in) ( L) µin Cylindrical mm to mm ( D) µm Pins/Plug FO s (0.004 in to 8 in) ( D) µin Ring Gages Plain F 3.81mm to mm D µm (0.15 in to 4 in) ( D) µin Ring Gages Threaded FO 0-80 to µm (270) µin Thread Plugs 0-80 to µm Pitch Diameter FO /Major (134) µin diameter FO Indicators FO Up to 25.4 mm µm Height Gages FO Rules Bore Gages FO Surface Plates - Repeat Reading FO Optical Comparators Linearity FO Squareness (X axis to Y axis) FO Angularity FO Magnification FO (Up to 1 in) 25.4 mm to 50.8 mm (1 in to 2 in) Up to mm (Up to 36 in) Up to 36 in. Up to mm Up to 4 in. Up to mm 1 mm to mm ( in. to 4 in) mm (0.002 in) Up to 508 mm (Up to 20 in) mm of Y axis travel or maximum Y axis travel if maximum is less than mm 8 in of Y axis travel or maximum Y axis travel if maximum is less than 8in (78 µin) µm (90 µin) µm (510 µin) in mm 9 µin µm 2.36 µm (93 µin) µm (51 µin) µm (510 µin) µm (510 µin) and Optical Flats Standard Measuring Machine Fit to Master Set Plug Measurement over wires with Standard Measuring Machine Indicator Cailbrator Height Master or Gage Block Comparator and Master Blocks Bore Gage Setting Master or Ring Repeat-O-Meter w/ Gage Amplifier & Probe 0 to º Angle Blocks 10 X 0.05 % Glass Scale 20 X 0.03 % 50 X 0.02 % 100 X 0.02 % Issue: 6/2015 This supplement is in conjunction with certificate #L Page 2 of 13

3 Electrical Equipment to Measure 0 mv to 330 mv % of reading + 3 µv Fluke 5500A DC Voltage FO 330 mv to 3.3 V % of reading + 5 µv 3.3 V to 33 V % of reading + 50 µv 33 V to 330 V % of reading µv 330 V to V % of reading µv Equipment to Measure 0 ma to 3.3 ma % of reading µa DC Current FO 3.3 ma to 33 ma 0.01 % of reading µa 33 ma to 330 ma 0.01 % of reading µa 330 ma to 2.2 A 0.03 % of reading + 44 µa 2.2 A to 11 A 0.06 % of reading µa Equipment to Measure 0 Ω to 11 Ω % of reading Ω Resistance FO 11 Ω to 33 Ω % of reading Ω 33 Ω to 110 Ω % of reading Ω 110 Ω to 330 Ω % of reading Ω 330 Ω to 1.1 kω % of reading Ω 1.1 kω to 3.3 kω % of reading Ω 3.3 kω to 11 kω % of reading Ω 11 kω to 33 kω % of reading Ω 33 kω to 110 kω % of reading + 6 Ω 110 kω to 330 kω % of reading + 6 Ω 330 kω to 1.1 MΩ % of reading + 55 Ω 1.1 MΩ to 3.3 MΩ % of reading + 55 Ω 3.3 MΩ to 11 MΩ 0.06 % of reading + 55 Ω 11 MΩ to 33 MΩ 0.1 % of reading Ω 33 MΩ to 110 MΩ 0.5 % of reading Ω 110 MΩ to 330 MΩ 0.5 % of reading Ω Equipment to Measure Resistance FO 330 MΩ to 10 GΩ 1 % of reading Step Resistor Equipment to Measure AC Voltage Fluke 5500A 10 Hz to 45 Hz 1 mv to 33 mv 0.35 % of reading + 20 µv 45 Hz to 10 khz 1 mv to 33 mv 0.15 % of reading + 20 µv 10 khz to 20 khz 1 mv to 33 mv 0.2 % of reading + 20 µv 20 khz to 50 khz 1 mv to 33 mv 0.25 % of reading + 20 µv 50 khz to 100 khz 1 mv to 33 mv 0.35 % of reading + 20 µv 100 khz to 500 khz 1 mv to 33 mv 1 % of reading + 60 µv Issue: 6/2015 This supplement is in conjunction with certificate #L Page 3 of 13

4 Electrical Equipment to Measure AC Voltage 10 Hz to 45 Hz 33 mv to 330 mv 0.25 % of reading + 50 µv 45 Hz to 10 khz 33 mv to 330 mv 0.05 % of reading + 20 µv 10 khz to 20 khz 33 mv to 330 mv 0.1 % of reading + 20 µv 20 khz to 50 khz 33 mv to 330 mv 0.16 % of reading + 40 µv 50 khz to 100 khz 33 mv to 330 mv 0.24 % of reading µv 100 khz to 500 khz 33 mv to 330 mv 0.7 % of reading µv Equipment to Measure AC Voltage 10 Hz to 45 Hz 0.33 V to 3.3 V 0.15 % of reading µv 45 Hz to 10 khz 0.33 V to 3.3 V 0.03 % of reading + 60 µv 10 khz to 20 khz 0.33 V to 3.3 V 0.08 % of reading + 60 µv 20 khz to 50 khz 0.33 V to 3.3 V 0.14 % of reading µv 50 khz to 100 khz 0.33 V to 3.3 V 0.24 % of reading µv 100 khz to 500 khz 0.33 V to 3.3 V 0.5 % of reading µv Equipment to Measure AC Voltage 10 Hz to 45 Hz 3.3 V to 33 V 0.15 % of reading µv 45 Hz to 10 khz 3.3 V to 33 V 0.04 % of reading µv 10 khz to 20 khz 3.3 V to 33 V 0.08 % of reading µv 20 khz to 50 khz 3.3 V to 33 V 0.19 % of reading µv 50 khz to 100 khz 3.3 V to 33 V 0.24 % of reading µv Equipment to Measure AC Voltage 45 Hz to 1 khz 33 V to 330 V 0.05 % of reading + 80 mv 1 khz to 10 khz 33 V to 330 V 0.2 % of reading mv 10 khz to 20 khz 33 V to 330 V 0.2 % of reading mv Equipment to Measure AC Voltage 45 Hz to 1 khz 330 V to V 0.05 % of reading mv 1 khz to 5 khz 330 V to V 0.08 % of reading + 15 mv 5 khz to 10 khz 330 V to V 0.09 % of reading + 33 mv Fluke 5500A Issue: 6/2015 This supplement is in conjunction with certificate #L Page 4 of 13

5 Electrical 10 Hz to 20 Hz 29 µa to 330 µa 0.25 % of reading µa 20 Hz to 45 Hz 29 µa to 330 µa % of reading µa 45 Hz to 1 khz 29 µa to 330 µa % of reading µa 1 khz to 5 khz 29 µa to 330 µa 0.4 % of reading µa 5 khz to 10 khz 29 µa to 330 µa 1.25 % of reading µa 10 Hz to 20 Hz 0.33 ma to 3.3 ma 0.2 % of reading µa 20 Hz to 45 Hz 0.33 ma to 3.3 ma 0.1 % of reading µa 45 Hz to 1 khz 0.33 ma to 3.3 ma 0.1 % of reading µa 1 khz to 5 khz 0.33 ma to 3.3 ma 0.2 % of reading µa 5 khz to 10 khz 0.33 ma to 3.3 ma 0.6 % of reading µa 10 Hz to 20 Hz 3.3 ma to 33 ma 0.2 % of reading + 3 µa 20 Hz to 45 Hz 3.3 ma to 33 ma 0.1 % of reading + 3 µa 45 Hz to 1 khz 3.3 ma to 33 ma 0.09 % of reading + 3 µa 1 khz to 5 khz 3.3 ma to 33 ma 0.2 % of reading + 3 µa 5 khz to 10 khz 3.3 ma to 33 ma 0.6 % of reading + 3 µa 10 Hz to 20 Hz 33 ma to 330 ma 0.2 % of reading + 30 µa 20 Hz to 45 Hz 33 ma to 330 ma 0.1 % of reading + 30 µa 45 Hz to 1 khz 33 ma to 330 ma 0.09 % of reading + 30 µa 1 khz to 5 khz 33 ma to 330 ma 0.2 % of reading + 30 µa 5 khz to 10 khz 33 ma to 330 ma 0.6 % of reading + 30 µa 10 Hz to 20 Hz 0.33 A to 2.2 A 0.2 % of reading µa 45 Hz to 1 khz 0.33 A to 2.2 A 0.1 % of reading µa 1 khz to 5 khz 0.33 A to 2.2 A 0.75 % of reading µa 45 Hz to 65 Hz 2.2 A to 11 A 0.06 % of reading µa 65 Hz to 500 Hz 2.2 A to 11 A 0.1 % of reading µa 500 Hz to 1 khz 2.2 A to 11 A 0.33 % of reading µa Fluke 5500A Issue: 6/2015 This supplement is in conjunction with certificate #L Page 5 of 13

6 Electrical 45 Hz to 440 Hz 11 A to 110 A 0.6 % of reading A 45 Hz to 65 Hz 110 A to 550 A 0.6% of reading A Equipment to Measure Capacitance At the listed frequencies 50 Hz to Hz FO Equipment to Measure Capacitance At the listed frequencies 50 Hz to 400 Hz FO Fluke 5500A w/ 50 Turn Coil 0.19 nf to 0.4 nf 0.5 % of reading nf Fluke 5500A 0.4 nf to 1.1 nf 0.5 % of reading nf 1.1 nf to 3.3 nf 0.5 % of reading nf 3.3 nf to 11 nf 0.5 % of reading nf 11 nf to 33 nf 0.25 % of reading nf 33 nf to 110 nf 0.25 % of reading nf 110 nf to 330 nf 0.25 % of reading nf 0.33 µf to 1.1 µf 0.25 % of reading + 1 nf 1.1 µf to 3.3 µf 0.35 % of reading + 3 nf 3.3 µf to 11 µf 0.35 % of reading + 10 nf 11 µf to 33 µf 0.4 % of reading + 30 nf 33 µf to 110 µf 0.5 % of reading nf 110 µf to 330 µf 0.7 % of reading nf 0.33 mf to 1.1 mf 1 % of reading nf Equipment to Measure Phase Angle 10 Hz to 65 Hz 0 to Hz to 500 Hz 0 to Hz to 1 khz 0 to khz to 5 khz 0 to khz to 10 khz 0 to Equipment to Measure DC Power At the listed amperages FO 33 mv to V 3.3 ma to 9 ma 109 µw to 9.18 W 0.04 % of reading 9 ma to 33 ma 297 µw to W 0.03 % of reading 33 ma to 90 ma µw to 91.8 W 0.04 % of reading 90 ma to 330 ma 2.97 mw to W 0.03 % of reading 0.33 A to 0.9 A mw to 918 W 0.08 % of reading 0.9 A to 2.2 A 29.7 mw to W 0.06 % of reading 2.2 A to 4.5 A 72.6 mw to W 0.12 % of reading 4.5 A to 11 A mw to W 0.09 % of reading Issue: 6/2015 This supplement is in conjunction with certificate #L Page 6 of 13

7 Electrical Equipment to Output 0 mv to 100 mv % of reading µv HP 34401A DC Voltage FO 0.1 V to 1 V % of reading + 7 µv 1 V to 10 V % of reading + 50 µv 10 V to 100 V % of reading mv 100 V to V % of reading + 10 mv 1 kv to 5 kv 1.05 % of reading HP 34401A with High Voltage Probe Equipment to Output 0 ma to 10 ma 0.05 % of reading µa DC Current FO 10 ma to 100 ma 0.05 % of reading + 5 µa 0.1 A to 1 A 0.1 % of reading ma 1 A to 3 A 0.12 % of reading ma 3 A to 10 A 0.2 % of reading + 1 digit Equipment to Output 0 Ω to 100 Ω 0.01 % of reading Ω Resistance FO 0.1 kω to 1 kω 0.01 % of reading Ω 1 kω to 10 kω 0.01 % of reading Ω 10 kω to 100 kω 0.01 % of reading + 1 Ω 100 kω to 1 MΩ 0.01 % of reading + 10 Ω 1 MΩ to 10 MΩ 0.04 % of reading Ω 10 MΩ to 100 MΩ 0.8 % of reading + 10 kω Equipment to Output AC Voltage 3 Hz to 5 Hz 0 mv to 100 mv 1 % of reading + 30 µv 5 Hz to 10 Hz 0 mv to 100 mv 0.35 % of reading + 30 µv 10 khz to 20 khz 0 mv to 100 mv 0.06 % of reading + 30 µv 20 khz to 50 khz 0 mv to 100 mv 0.12 % of reading + 50 µv 50 khz to 100 khz 0 mv to 100 mv 0.6 % of reading + 80 µv 100 khz to 300 khz 0 mv to 100 mv 4 % of reading µv Equipment to Output AC Voltage 3 Hz to 5 Hz 100 mv to 750 V 1 % of reading V 5 Hz to 10 Hz 100 mv to 750 V 0.35 % of reading V 10 khz to 20 khz 100 mv to 750 V 0.06 % of reading V 20 khz to 50 khz 100 mv to 750 V 0.12 % of reading V 50 khz to 100 khz 100 mv to 750 V 0.6 % of reading V 100 khz to 300 khz 100 mv to 750 V 4 % of reading V HP 34401A Issue: 6/2015 This supplement is in conjunction with certificate #L Page 7 of 13

8 Electrical Equipment to Output AC Voltage 50 Hz to 100 Hz 750 V to V 0.7 % of reading + 2 digits Equipment to Output AC Current 3 Hz to 5 Hz 0 ma to 1 A 1 % of reading µa 5 Hz to 10 Hz 0 ma to 1 A 0.3 % of reading µa 10 Hz to 5 khz 0 ma to 1 A 0.1 % of reading µa Equipment to Output AC Current 3 Hz to 5 Hz 1 A to 3 A 1 % of reading ma 5 Hz to 10 Hz 1 A to 3 A 0.3 % of reading ma 10 Hz to 5 khz 1 A to 3 A 0.1 % of reading ma Equipment to Output AC Current At the listed frequencies 50 Hz to 10 khz FO Mass, Force, and Weighing Devices 3 A to 4 A 1 % of reading + 2 digits 4 A to 10A 1 % of reading + 2 digits DEVICE SIZE AS HP34401A HP 34401A Force FO lbf to 100 lbf 0.35 % F.S. Class 6 Weights 101 lbf to lbf 0.5% of Reading Master Load Cell w/indicator Analytical Balances FO 1 g to 5000 g 13 mg Class 1 Weights Scales - Bench Type FO Scales - Platform Type FO lbs to 300 lbs (0.001 kg to kg) 300 lbs to lbs ( kg to kg) lbs Class 6 Weights (16.78 g) 232 g Class 6 Weights Method based on NIST Handbook 44 with substitution Issue: 6/2015 This supplement is in conjunction with certificate #L Page 8 of 13

9 Mechanical DEVICE SIZE AS Torque Wrenches FO N m to N m 0.8 % of reading CDI Torque Analyzer (0.5 lbf in to 600 lbf ft) Torque Analyzers FO 0.6 N m to 56 N m (5 lbf in to 500 lbf in) % target value 5 in Radius Arm w/ Class 6 Weights 56 N m to 813 N m (500 lbf in to 600 lbf ft) % target value 40 in Radius Arm w/ Class 6 Weights Vacuum FO kpa to 0 kpa % of reading Druck DPI 603 (-27 inhg to 0 inhg) Pressure - Pneumatic FO kpa to kpa 1 psig to 300 psig % of reading Pneumatic Deadweight Tester Pressure Hydraulic FO kpa to kpa 5 psig to psig 0.11 % of reading Hydraulic Deadweight Tester Tachometer (Optical) FO 0 RPM to RPM % of reading Electrical Simulation using Multi. Calibrator Indirect Verification of 70 HRA to 79 HRA 1 HRA ASTM-E 18 and Rockwell Hardness 79 HRA to 89 HRA 1 HRA calibrated Rockwell Tester HRA F 89 HRA to 99 HRA 1 HRA Hardness Test Blocks Indirect Verification of Rockwell Hardness Tester HRB F Indirect Verification of Rockwell Hardness Tester HRC F 40 HRB to 59 HRB 2 HRB 59 HRB to 69 HRB 2 HRB 69 HRB to 89 HRB 2 HRB 20 HRC to 39 HRC 1 HRC 39 HRC to 59 HRC 1 HRC 59 HRC to 79 HRC 1 HRC Issue: 6/2015 This supplement is in conjunction with certificate #L Page 9 of 13

10 Thermodynamic B FO C FO E FO J FO K FO L FO N FO R FO 600 C to 800 C 0.44 C Fluke 5500A 800 C to C 0.34 C C to C 0.3 C C to C 0.33 C 0 C to 150º C 0.30 ºC 150 C to 650º C 0.26 ºC 650 C to 1 000º C 0.31 ºC C to 1 800º C 0.50 ºC C to 2 316º C 0.84 ºC -250 ºC to -100 ºC 0.50 ºC -100 ºC to -25 ºC 0.16 ºC -25 ºC to 350 ºC 0.14 ºC 350 ºC to 650 ºC 0.16 ºC 650 ºC to ºC 0.21 ºC -210 to -100 ºC 0.27 ºC -100 ºC to -30 ºC 0.16 ºC -30 ºC to 150 ºC 0.14 ºC 150 ºC to 760 ºC 0.17 ºC 760 ºC to ºC 0.23 ºC -200 ºC to -100 ºC 0.33 ºC -100 ºC to -25 ºC 0.18 ºC -25 ºC to 120 ºC 0.16 ºC 120 ºC to ºC 0.26 ºC ºC to ºC 0.40 ºC -200 to -100 ºC 0.37 ºC -100 to 800 ºC 0.26 ºC 800 ºC to 900 ºC 0.17 ºC -200 ºC to -100 ºC 0.40 ºC -100 ºC to -25 ºC 0.22 ºC -25 ºC to 120 ºC 0.19 ºC 120 ºC to 410 ºC 0.18 ºC 410 ºC to ºC 0.27 ºC 0 ºC to 250 ºC 0.57 ºC 250 ºC to 400 ºC 0.37 ºC 400 ºC to ºC 0.33 ºC ºC to ºC 0.40 ºC Issue: 6/2015 This supplement is in conjunction with certificate #L Page 10 of 13

11 Thermodynamic S FO T FO U FO RTD Pt Ω FO RTD Pt Ω FO RTD Pt Ω FO RTD Pt Ω FO 0 ºC to 250 ºC 0.47 ºC Fluke 5500A 250 ºC to ºC 0.36 ºC ºC to ºC 0.37 ºC ºC to ºC 0.46 ºC -250 ºC to -150 ºC 0.63 ºC -150 ºC to 0 ºC 0.24 ºC 0 ºC to 120 ºC 0.16 ºC 120 ºC to 400 ºC 0.14 ºC -200 ºC to 0 ºC 0.56 ºC 0 ºC to 600 ºC 0.27 ºC -200 ºC to -80 ºC 0.05 ºC -80 ºC to 0 ºC 0.05 ºC 0 ºC to 100 ºC 0.07 ºC 100 ºC to 300 ºC 0.09 ºC 300 ºC to 400 ºC 0.10 ºC 400 ºC ºC to 630 ºC 0.12 ºC 630 ºC to 800 ºC 0.23 ºC -200 ºC to -80 ºC 0.05 ºC -80 ºC to 0 ºC 0.05 ºC 0 ºC to 100 ºC 0.07 ºC 100 ºC to 300 ºC 0.09 ºC 300 ºC to 400 ºC 0.10 ºC 400 ºC to 630 ºC 0.12 ºC -200 ºC to -190 ºC 0.25 ºC -190 ºC to -80 ºC 0.04 ºC -80 ºC to 0 ºC 0.05 ºC 0 ºC to 100 ºC 0.06 ºC 100 ºC to 260 ºC 0.07 ºC 260 ºC to 300 ºC 0.08 ºC 300 ºC to 400 ºC 0.09 ºC 400 ºC to 600 ºC 0.10 ºC 600 ºC to 630 ºC 0.23 ºC -200 ºC to -80 ºC 0.04 ºC -80 ºC to 0 ºC 0.04 ºC 0 ºC to 100 ºC 0.04 ºC 100 ºC to 260 ºC 0.05 ºC 260 ºC to 300 ºC 0.12 ºC 300 ºC to 400 ºC 0.13 ºC 400 ºC to 600 ºC 0.14 ºC 600 ºC to 630 ºC 0.16 ºC Issue: 6/2015 This supplement is in conjunction with certificate #L Page 11 of 13

12 Thermodynamic RTD Pt Ω FO RTD Pt Ω FO RTD Ni Ω FO RTD Cu Ω FO Equipment to output -200 ºC to -80 ºC 0.04 ºC Fluke 5500A -80 ºC to 0º C 0.05 ºC 0 ºC to 100º C 0.05 ºC 100 ºC to 260 ºC 0.06 ºC 260 ºC to 300 ºC 0.08 ºC 300 ºC to 400 ºC 0.08 ºC 400 ºC to 600 ºC 0.09 ºC 600 ºC to 630 ºC 0.11 ºC -190 ºC to -80 ºC 0.03 ºC -80 ºC to 0 ºC 0.03 ºC 0 ºC to 100 ºC 0.04 ºC 100 ºC to 260 ºC 0.05 ºC 260 ºC to 300 ºC 0.06 ºC 300 ºC to 400 ºC 0.07 ºC 400 ºC to 600 ºC 0.07 ºC 600 ºC to 630 ºC 0.23 ºC -80 ºC to 0 ºC 0.08 ºC 0 ºC to 100 ºC 0.08 ºC 100 ºC to 260 ºC 0.14 ºC -100 ºC to 260 ºC 0.30 ºC Temperature FO Thermometer -196 ºC C to 600 C C Platinum Resistance Equipment to measure 90 C to 300 C 1.1 C Dry Block Calibrator Temperature FO 0 C Icepoint Reference C Ice Bath w/prt Infrared Thermometers FO 20 C to 300 C 1.3 C Hart Scientific 1935 Humidity - Measure FO 10 % RH to 90 % RH 2 % RH Digital Thermohygrometer Issue: 6/2015 This supplement is in conjunction with certificate #L Page 12 of 13

13 Time & Frequency Equipment to Generate Up to 1.2 GHz (3 x 10-9 ) of reading Racal-Dana 1992 frequency FO 1.2 GHz to 18 GHz (1.2 x 10-6 ) of reading HP 5342A Equipment to measure Up to 10 khz (2. 5 x 10-3 ) of setting Fluke 5500A frequency FO 10 khz to 990 MHz (2 x 10-6 ) of setting HP 10 MHz (3 x 10-9 ) of setting Racal-Dana 1992 Stopwatch/Process Timer FO 19.2 h to 24 h 1 sec Master Stopwatch 1. The CMC (Calibration and Measurement Capability) stated for calibrations included on this scope of accreditation represents the smallest measurement uncertainty attainable by the laboratory when performing a more or less routine calibration of a nearly ideal device under nearly ideal conditions. It is typically expressed at a confidence level of 95 % using a coverage factor k (usually equal to 2). The actual measurement uncertainty associated with a specific calibration performed by the laboratory will typically be larger than the CMC for the same calibration since capability and performance of the device being calibrated and the conditions related to the calibration may reasonably be expected to deviate from ideal to some degree. 2. The laboratories range of calibration capability for all disciplines for which they are accredited is the interval from the smallest calibrated standard to the largest calibrated standard used in performing the calibration. The low end of this range must be an attainable value for which the laboratory has or has access to the standard referenced. Verification of an indicated value of zero in the absence of a standard is common practice in the procedure for many calibrations but by its definition it does not constitute calibration of zero capacity. 3. The presence of a superscript F means that the laboratory performs calibration of the indicated parameter at its fixed location. Example: Outside MicrometerF would mean that the laboratory performs this calibration at its fixed location. 4. The presence of a superscript FO means that the laboratory performs calibration of the indicated parameter both at its fixed location and onsite at customer locations. Example: Outside MicrometerFO would mean that the laboratory performs this calibration at its fixed location and onsite at customer locations. 5. Measurement uncertainties obtained for calibrations performed at customer sites can be expected to be larger than the measurement uncertainties obtained at the laboratories fixed location for similar calibrations. This is due to the effects of transportation of the standards and equipment and upon environmental conditions at the customer site which are typically not controlled as closely as at the laboratories fixed location. 6. The term L represents length in inches or millimeters appropriate to the uncertainty statement. 7. The term D represents diameter in inches or millimeters appropriate to the uncertainty statement. Issue: 6/2015 This supplement is in conjunction with certificate #L Page 13 of 13

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Quad State Gauging and Measurement, Inc. (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation has assessed the Laboratory of: Rays Precision Calibration, Inc 881-3 Nandino Blvd., Lexington, KY 40511 (Hereinafter called the

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 0 (Hereinafter called the Organization) and hereby

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Guadalupe Nuevo León, México C.P. 67160 (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México. C.P. 88787 0 (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:. (Hereinafter called the Organization) and hereby

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México C.P. 88787 0 (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:, (Hereinafter called the Organization) and hereby

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Metrología y Mantenimiento Industrial S.A. de C.V.

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Nicol Scales, L.P. 15800 West Hardy Road, Suite 500,

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México C.P. 88787 0 (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Rio Bravo, Tamaulipas, México. C.P. 88940 (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 0 (Hereinafter called the Organization) and hereby

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Acceso III No. 16 A Nave 10, Parque Industrial Benito

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Horizonte #28 entre Astro Rey Sur y Nuevo Amanecer

More information

Presented By. NicolScales.com Contact Us

Presented By. NicolScales.com Contact Us Presented By Dallas Ft Worth Austin Houston NicolScales.com 800.225.8181 Contact Us is an ISO Accredited Calibration Company that has provided calibration, repair and sales of all types of weighing and

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Hardt Calibration Laboratory S. de R.L. de C.V., (Hereinafter

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALDINGER COMPANY 8023 Interstate 30 Little Rock, AR 72209 Dustin R. Detten Phone: 214 638 1808 CALIBRATION Valid To: September 30, 2018

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Instrumentación Analítica y Metrología S.A. de C.V

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:, Cd. Gustavo Díaz Ordaz, Tamaulipas 88400 (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Paseo de la Cañada # 158, Colonia Fuentes Sección

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAL-TEC, INC. 114 Thruway Park Road Broussard, LA 70518 Chris Grevemberg Phone: 337 839 0450 Email: lab@caltecinc.com CALIBRATION Valid

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 DIGITAL MEASUREMENT METROLOGY INC. (A TRESCAL COMPANY) 26 Automatic Road, Unit 4 Brampton, Ontario, CANADA L6S 5N7 Nana Mantey Phone:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY TESTING SERVICES, INC. 2305 Millpark Drive Maryland Heights, MO 63043 Heather Ryan Phone: 314 770 0607 CALIBRATION Valid To:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC South Lakes Drive Charlotte, NC Connie Foster Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC South Lakes Drive Charlotte, NC Connie Foster Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 14200 South Lakes Drive Charlotte, NC 28273 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: August 31, 2019 Certificate Number:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JOHNSON GAGE AND INSPECTION 5920 W. 21st Street North Wichita, KS 67205 Scott Porter Phone: 316-943-7532 CALIBRATION Valid To: May 31,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J. A. KING & COMPANY, LLC 14200 South Lakes Drive Charlotte, NC 28273 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: August

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate

More information

Accredited Laboratory

Accredited Laboratory Accredited Laboratory A2LA has accredited NORTHSTAR CALIBRATION, INC. Owatonna, MN for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 3000 Northwoods

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION Valid To: May 31, 2019

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: December

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INCAL TECHNOLOGIES, INC. 3870 E. Washington Road Saginaw, MI 48601 Rob VanBuskirk Phone: 989 758 0950 CALIBRATION Valid To: May 31,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 WESTERN STATES CALIBRATION 105 West 2950 South Salt Lake City, UT 84115-3433 Lon Miles Phone: 801 466 1700 CALIBRATION Valid To: February

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METROCAL, INC 3631 44 th Street SE, Suite B Kentwood, MI 49512 Kent Anderson Phone: 616 698 3124 CALIBRATION Valid To: September 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHSTAR CALIBRATION, INC. 1045 26th Place NW Owatonna, MN 55060 John Moorhouse Phone: 507 444 9111 CALIBRATION Valid To: February 29, 2020 Certificate Number:

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION Valid To: May 31, 2019

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 241 Riverview Avenue. Newton MA 02466 505 Boul.du

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 4613 Northwest

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENI Labs 3120 Independence Dr. Fort Wayne, IN 46808 Andrew Burd Phone: 260 471 6775 CALIBRATION Valid To: April 30, 2018 Certificate

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APTIV CONTRACT SERVICES. S. DE R. L. DE C. V. CALIBRATION LAB Mexico Technical Center Ave. Hermanos Escobar #5756 Cd. Juarez, Chihuahua C.P. 32310, Mexico Ricardo

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN Connie Foster Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN Connie Foster Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN 37062 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: May 31, 2019 Certificate Number: 1741.08

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALABAMA SCALE & INSTRUMENT, INC. d.b.a. ASI Calibration Labs Alabama 1644 Varner Drive Mobile, AL 36693 Lawson Hill Phone: 251 660 9999

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Bldg#660 King Abdullah Road, Al Waha District, Riyadh,

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Alliance Calibration 11402 Reading Road Cincinnati,

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Doko Bldg., 3-3-4,Minamisuna, Koto-ku, Tokyo 136-8580

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INTERNATIONAL CERTIFICATION MEASUREMENTS, INC. (SUBSIDIARY OF LEADER CORPORATION) 51644 Filomena Dr. Shelby Township, MI 48315 Brenda

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Dale Robenault Phone: 734 451 8740 CALIBRATION Valid To: September 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Thomas Snyder Phone: 734 451 8740 CALIBRATION Valid To: July 31, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453 8003 CALIBRATION Valid To: March 31, 2019 Certificate

More information

Certificate of Accreditation

Certificate of Accreditation Certificate of Accreditation ISO/IEC 17025:1999 Certificate Number L1048 Digital Measurement Metrology Inc. 26 Automatic Road, Unit 4 Raj Sharma Brampton, Ontario L6S 5N7 Canada Is recognized by the Laboratory

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. J. A. KING 354 Riverchase Way Lexington, SC Connie Foster Phone: CALIBRATION

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. J. A. KING 354 Riverchase Way Lexington, SC Connie Foster Phone: CALIBRATION SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 J. A. KING 354 Riverchase Way Lexington, SC 29072 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: February 28, 2021 Certificate Number: 1741.12 In recognition

More information

Scope of Accreditation For Alliance Calibration. Calibration

Scope of Accreditation For Alliance Calibration. Calibration Scope of Accreditation For Alliance 11402 Reading Road Cincinnati, OH 45241 Sidney Taylor 513-769-1200 In recognition of a successful assessment to ISO/IEC 17025:2005 to the following and Measurement Capabilities,

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 MTS METROLOGY AND CALIBRATION LABORATORY 14000 Technology Drive Eden Prairie, MN 55344 Kevin Rust Phone: 952 937 4790 www.mts.com CALIBRATION

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 PROBATA CORPORATION 14600 Metro Plaza Blvd. Edmond, Oklahoma 73013 Greg Chambers Phone: 405 607 4813 CALIBRATION Valid To: September

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Precision Repair and Calibration 9150 Isanti

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: HQ: Calmet Industrial S.A. de C.V Lázaro Cárdenas

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Portland 14058 SW Milton Court Portland,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TRESCAL, INC. 1125 North Corporate Drive, Suite 207-A Mobile, AL 36607 Sergey Pasechnikov Phone: 251-461-6609

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 WESCAN CALIBRATION #9-12240 Horseshoe Way Richmond, B.C., V7A 4X9, Canada Malcolm Smith Phone: 604 275 0600

More information

Scope of Accreditation For The Calibration Solution Inc. Calibration

Scope of Accreditation For The Calibration Solution Inc. Calibration Scope of Accreditation For The Solution Inc. 9865 North Alpine Road Machesney Park, IL 61115 Jeff Tratnik 815-877-0880 In recognition of a successful assessment to ISO/IEC 17025:2005 and ANSI/NCSL Z540.1:1994,

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that OCS Technologies, Inc. (dba: Ohio Counting

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Servicios Profesionales de Calibración y Mantenimiento,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453-8003 CALIBRATION Valid To: July 31, 2017 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. Calibration Laboratory Division 7323 Tom Drive Baton Rouge, LA 70806 Jerry Kraus Phone: 225 925 2029 x3028 CALIBRATION

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J. A. KING & COMPANY, LLC 7239 ACC Blvd, Suite 101 Raleigh, NC 27617 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: May 31,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 MENTOR TECHNICAL GROUP METROLOGY LAB Caguas Real #100 Alhambra Granada Blvd. Caguas, Puerto Rico Angel Pabellon Phone: 787 536-6028

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JOHNSON GAGE AND INSPECTION 5920 W. 21st Street North Wichita, KS 67205 Scott Porter Phone: 316-943-7532 CALIBRATION Valid To: March

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ASSOCIATED CALIBRATION, INC. DBA A-CAL 4583 E Eisenhower Circle Anaheim, CA 92807 Marshall Doyle Phone: 714 696 5300 CALIBRATION Valid To: January 31, 2019

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:, Inc. (Hereinafter called the Organization) and hereby

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 9902 East 43 RD Street Suite D Tulsa, OK 74146 Mark Jackson Phone: 800 438 8165 CALIBRATION Valid To: September 30,

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Cal Tec Process Management, LLC 1400 Grange

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Denver 3521 Lewiston St, Suite 12

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 NATIONAL TECHNICAL SYSTEMS (NTS) 7800 Highway 20 West Huntsville, AL 35806 Rick Davis Phone: 256 716 4483 CALIBRATION Valid To: December

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J.A. KING & COMPANY, LLC 1100 SE 66 th Street Oklahoma City, OK Connie Foster Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J.A. KING & COMPANY, LLC 1100 SE 66 th Street Oklahoma City, OK Connie Foster Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J.A. KING & COMPANY, LLC 1100 SE 66 th Street Oklahoma City, OK 73149 Connie Foster Phone: 405 670 1388 CALIBRATION Valid To: March 31, 2020 Certificate Number:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 INDUSTRIAL PROCESS MEASUREMENT, INC. 3910 Park Avenue, Unit 7 Edison, NJ 08820 Mark Gural Phone: 732 632 6400 www.instrumentation2000.com

More information

Certificate of Accreditation

Certificate of Accreditation Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L1050-1 The Tool & Gage House Quality Services Division 538 E. Hebron Street Charlotte NC 28273 has met the requirements set forth in

More information