Certificate of Accreditation

Transcription

1 PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognized International Standard: ISO/IEC 17025:2005 This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (as outlined by the joint ISO-ILAC-IAF Communiqué dated January 2009): Dimensional, Time and Frequency, Mechanical, Mass, Force and Weighing Devices, Thermodynamic,, and Chemical Calibration (As detailed in the supplement) Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate. This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the Accreditation body s duty to observe and comply with the said rules. For PJLA: Initial Accreditation Date: Issue Date: Expiration Date: May 05, 2011 December 29, 2017 December 31, 2019 Tracy Szerszen President/Operations Manager Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver, Suite 1325 Troy, Michigan Accreditation No.: Certificate No.: L The validity of this certificate is maintained through ongoing assessments based on a continuous accreditation cycle. The validity of this certificate should be confirmed through the PJLA website: Page 1 of 14

2 Dimensional Certificate of Accreditation: Supplement OR NOMINAL DEVICE SIZE AS APPROPRIATE AND MEASUREMENT EQUIPMENT AND REFERENCE Calipers F 0.6 in to 24 in ( L) μin Block gage, Bar Set Mitutoyo Mod: al 160 Micrometer Outside F 1 in to 8 in ( L) μin Comparison Block Gage Depth Micrometer F 1 in to 8 in ( L) μin Indicators F 0.5 in to 2 in (90 + 6L) μin Mitutoyo in to 1 in (80 + 6L) μin Head Micrometer Mitutoyo Mod: 0-1'' Height Gage F 0.6 in to 24 in ( L) μin Block gage, Bar Set Mitutoyo Mod: al 160 Gage Block F 0.1 in to 8 in (2 + 4L) μin Comparison Block Gage Mitutoyo grade 0 Indicator Mahr Mod: millitast 1085 Pin Gage F 0.01 in to 1 in 90 μin Length Measuring Matching 828M Mahr, Indicator Mahr 1085 Rules F 2.54 mm to mm 0.8 mm Graduate Rule Glass Scale F 2.54 mm to 300 mm 0.8 mm Mitutoyo Mod: Optical Comparator X axis Linearity Y axis Linearity F Squareness of Y axis to X axis F Optical Comparators Angularity F Optical Comparator Magnification O 12 in Maximum 12 in Maximum 8 in of Y travel or Maximum Y axis travel if Maximum is less than 8 in Glass Rule Mod: μin Comparison Block Gage Mitutoyo Master Square Comparison Block Gage Mitutoyo 0 to Angular Reticule Mitutoyo Comparison Block Gage Mitutoyo 10X 0.03 % Comparison Block Gage 20X 0.03 % Mitutoyo 31.5X 0.03 % 62.5X 0.03 % 50X 0.04 % Issue: 12/2017 This supplement is in conjunction with certificate #L Page 2 of 14

3 Dimensional OR NOMINAL DEVICE SIZE AS APPROPRIATE AND MEASUREMENT EQUIPMENT AND REFERENCE Angle Block and Protactor F 0 to Digital Protractor Fowler Mod: Thickness Gage F 23 μm to μm 2 μm Plastic Shims Defelsko Mod: Set Granite Surface Plate Repeat Only F Mechanical m 80 μm Repeat Reading Gage Starrett With Electronic Indicator WHERE APPROPRIATE) Rockwell Hardness O 20 HRC to 39 HRC 0.47 HRC Test Block 40 HRC to 59 HRC 0.48 HRC 60 HRC to 68 HRC 0.43 HRC 10 HRBW to 50 HRBW 1.1 HRBW 51 HRBW to 79 HRBW 0.82 HRBW 80 HRBW to 100 HRBW 0.69 HRBW EQUIPMENT AND REFERENCE ASTM E 18 Mod: 25 HRC,45 HRC, 63 HRC, 70 HRB, 30 HRB, 60 HRB, 95 HRB Pressure Gauge F 100 psi to psi 0.25 % of reading Omega, Pressure Gage Mod: DPG8001-1K psi to psi 0.4 % of reading Cristal, Pressure Gage Mod: M1-10KPSI Torque Gauge F 60 lbf ft to 600 lbf ft 1.2 % of reading Torque Tester Sturtevant Richmond Mod: 600 Vacuum O 1 inhg to 25 inhg 0.25 % of reading Cristal, Pressure Gage Mod: M1-10KPSI Time & Frequency WHERE APPROPRIATE) EQUIPMENT AND REFERENCE Clock FO 9 h: 59 min: 599 s 0.6 s Digital Stopwatch Chronometer FO 23 h: 59 min: 599 s 5.3 s Timers FO 23 h: 59 min: 599 s 5.3 s Tachometers FO 10 rpm to rpm 0.25 % of reading Speed Meters and rpm. Tachometer non-contact. Model: 8000 Marker: AZ Instrumental Issue: 12/2017 This supplement is in conjunction with certificate #L Page 3 of 14

4 Mass, Force and Weighing Devices WHERE APPROPRIATE) Tension O N to 49 N 0.2 % of reading Dead Weight F Rice Lake, Mod: 1 MG-5KG 2 KN to 22 KN 0.5 % of reading Force Gage Dillon Mod: Extreme 4 KN to 44 KN 0.3 % of reading Load Cell Transducer Techniques Mod: SW0-20K Compression O N to 49 N 0.2 % of reading Dead Weight F Rice Lake, Mod: 1MG-5KG 2 KN to 22 KN 0.5 % of reading Force Gage Dillon Mod: Extreme Compression O 4 KN to 44 KN 0.3 % of reading Load Cell Transducer Techniques Mod: SW0-20K Scales and Balances O 1 mg to 500 mg (Res.= 0.1 mg) (2.57 x x 10-3 Wt) mg Class M1 Weights Rice Like Mod: 500 mg to 500 g (1.5 x x 10-5 Wt) g (Res.= 1 mg) 500 g to 5 kg 12 g (Res.= 10 g) Scales and Balances O 5 kg to 350 kg (Res.= 0.5 kg) 580 g Class M1 Weights Esher Thermodynamic Temperature Calibration with Thermocouple Type J F Temperature Calibration with Thermocouple Type K F Temperature Calibration with Thermocouple Type R F Temperature Calibration with Thermocouple Type S F WHERE APPROPRIATE) -210 C to C ( x 10-4 T) C CL3515R OMEGA ASTM E C to C ( x 10-4 T) C 0 C to C ( x 10-4 T) C 0 C to C ( x 10-4 T) C Issue: 12/2017 This supplement is in conjunction with certificate #L Page 4 of 14

5 Thermodynamic Hygrometers F 10 % RH to 90 % RH 2 % of reading Temperature and Humidity Humidity Tester F 10 % RH to 90 % RH 2 % of reading Recorder & Humidity Chamber Generator Humidity Chamber F 10 % RH to 90 % RH 2 % of reading RTD Pt 385, 100 Ω FO RTD Pt 3926, 100 Ω FO RTD Pt 3916, 100 Ω FO EQUIPMENT AND REFERENCE -200 C to -80 C 0.05 C Simulation -80 C to 0 C 0.06 C Output 0 C to 100 C 0.08 C 100 C to 300 C 0.09 C 300 C to 400 C 0.1 C 400 C to 630 C 0.12 C 630 C to 800 C 0.24 C 200 C to -80 C 0.05 C -80 C to 0 C 0.06 C 0 C to 100 C 0.08 C 100 C to 300 C 0.09 C 300 C to 400 C 0.1 C 400 C to 630 C 0.12 C -200 C to -190 C 0.29 C -190 C to -80 C 0.05 C -80 C to 0 C 0.06 C 0 C to 100 C 0.07 C 100 C to 260 C 0.07 C 260 C to 300 C 0.08 C 300 C to 400 C 0.09 C 400 C to 600 C 0.09 C 600 C to 630 C 0.24 C -80 C to 0 C 0.03 C 0 C to 100 C 0.05 C 100 C to 260 C 0.05 C Issue: 12/2017 This supplement is in conjunction with certificate #L Page 5 of 14

6 RTD Pt 3916, 100 Ω FO RTD Pt 385, 500 Ω FO RTD Pt 385, Ω FO RTD PtNi 385, 120 Ω FO RTD Cu 427, 10 Ω FO Thermocouple Type B FO EQUIPMENT AND REFERENCE 260 C to 300 C 0.13 C Simulation 300 C to 400 C 0.14 C Output 400 C to 600 C 0.14 C 600 C to 630 C 0.16 C 0 C to 100 C 0.06 C 100 C to 260 C 0.07 C 260 C to 300 C 0.08 C 300 C to 400 C 0.08 C 400 C to 600 C 0.09 C 600 C to 630 C 0.1 C -200 C to -80 C 0.03 C -80 C to 0 C 0.03 C 0 C to 100 C 0.03 C 100 C to 260 C 0.05 C 260 C to 300 C 0.06 C 300 C to 400 C 0.06 C 400 C to 600 C 0.07 C 600 C to 630 C 0.25 C -80 C to 0 C 0.07 C 0 C to 100 C 0.08 C 100 C to C -100 C to 260 C 0.35 C Simulation Output 600 C to 800 C 0.49 C 800 C to C 0.39 C C to C 0.36 C C to C 0.31 C Issue: 12/2017 This supplement is in conjunction with certificate #L Page 6 of 14

7 Thermocouple Type C FO Thermocouple Type E FO Thermocouple Type J FO Thermocouple Type K FO Thermocouple Type L FO Thermocouple Type N FO Thermocouple Type R FO Certificate of Accreditation: Supplement 0 C to 150 C 0.27 C Simulation Output 150 C to 650 C 0.23 C 650 C to C 0.27 C C to C 0.44 C C to C 0.73 C -250 C to -100 C 0.44 C -100 C to -25 C 0.15 C -25 C to 350 C 0.13 C 350 C to 650 C 0.15 C 650 C to C 0.2 C 210 C to -100 C 0.24 C -100 C to -30 C 0.15 C -30 C to 150 C 0.13 C 150 C to 760 C 0.16 C 760 C to C 0.23 C -200 C to -100 C 0.3 C -100 C to -25 C 0.17 C -25 C to 120 C 0.16 C 120 C to C 0.23 C C to C 0.36 C -200 C to -100 C 0.43 C Simulation Output 100 C to 800 C 0.3 C 800 C to 900 C 0.21 C -200 C to -100 C 0.35 C -100 C to -25 C 0.21 C -25 C to 120 C 0.18 C 120 C to 410 C 0.17 C 410 C to C 0.26 C 0 C to 250 C 0.55 C 250 C to 400 C 0.33 C 400 C to C 0.3 C C to C 0.36 C Issue: 12/2017 This supplement is in conjunction with certificate #L Page 7 of 14

8 Thermocouple Type S FO Thermocouple Type T FO Thermocouple Type U FO DC Voltage FO DC Current FO Resistance FO WHERE APPROPRIATE) EQUIPMENT AND REFERENCE 0 C to 250 C 0.54 C Simulation 250 C to C 0.35 C Output C to C 0.33 C C to C 0.4 C -250 C to -150 C 0.56 C -150 C to 0 C 0.22 C 0 C to 120 C 0.15 C 120 C to 400 C 0.13 C -200 C to 0 C 0.65 C 0 C to 600 C 0.32 C 10 mv to mv 1.3 µv 330 mv to V 37 µv 3.0 V to V 0.4 mv 33 V to V 6 mv 330 V to V 20 mv µa to µa 24 na 330 µa to ma 68 na 3.30 ma to ma 8.7 µa ma to ma 3.9 µa 330 ma to A 0.3 ma 1.1 A to A 1.1 ma 3 A to A 5.4 ma 11A to 20.5 A 25 ma 0 Ω to Ω 1.7 mω 11 Ω to Ω 2.7 mω 33 Ω to Ω 4.5 mω 110 Ω to Ω 11 mω 330 kω to kω 31 mω 1.1 kω to kω 0.2 Ω 3.3 kω to kω 0.3 Ω 11 k Ω to kω 1.1 Ω Issue: 12/2017 This supplement is in conjunction with certificate #L Page 8 of 14

9 Resistance FO 33 kω to kω 3.1 Ω 110 kω to kω 12 Ω 330 kω to MΩ 0.03 KΩ 1.1 MΩ to MΩ 0.19 KΩ 3.3 MΩ to MΩ 1.5 KΩ 11 MΩ to MΩ 11 KΩ 33 MΩ to MΩ 0.6 MΩ 110 MΩ to MΩ 1.1 MΩ 330 MΩ to MΩ 16 MΩ AC Voltage 10 Hz to 45 Hz 1 mv to mv 14 µv 45 Hz to 10 khz 1 mv to mv 7.3 µv 10 khz to 20 khz 1 mv to mv 7.6 µv 20 khz to 50 khz 1 mv to mv 7.3 µv 50 khz to 100 khz 1 mv to mv 15 µv 100 khz to 500 khz 1 mv to mv 64 µv AC Voltage 10 Hz to 45 Hz 33 mv to mv 16 µv 45 Hz to 10 khz 33 mv to mv 13 µv 10 khz to 20 khz 33 mv to mv 13 µv 20 khz to 50 khz 33 mv to mv 14 µv 50 khz to 100 khz 33 mv to mv 39 µv 100 khz to 500 khz 33 mv to mv 84 µv AC Voltage 10 Hz to 45 Hz 0.33 V to V 1.2 mv 45 Hz to 10 khz 0.33 V to V 0.7 mv 10 khz to 20 khz 0.33 V to V 0.7 mv 20 khz to 50 khz 0.33 V to V 1.1 mv Issue: 12/2017 This supplement is in conjunction with certificate #L Page 9 of 14

10 AC Voltage 50 khz to 100 khz 0.33 V to V 2.3 mv 100 khz to 500 khz 0.33 V to V 8.4 mv Equipment to measure AC Voltage 10 Hz to 45 Hz F 3.3 V to V 11 mv 45 Hz to 10 khz 3.3 V to V 5.5 mv 10 khz to 20 khz 3.3 V to V 9.1 mv 20 khz to 50 khz 3.3 V to V 13 mv 50 khz to 100 khz 3.3 V to V 31 mv Equipment to measure AC Voltage 45 Hz to 1 khz 33 V to V 61 mv 1 khz to 10 khz 33 V to V 69 mv 10 khz to 20 khz 33 V to V 92 mv 20 khz to 50 khz 33 V to V 0.1 V 50 khz to 100 khz 33 V to V 0.7 V Equipment to measure AC Voltage 45 Hz to 1 khz 330 V to V 0.3 V 1 khz to 5 khz 330 V to V 0.3 V 5 khz to 10 khz 330 V to V 0.3 V 10 Hz to 20 Hz 29 to µa 0.8 µa 20 Hz to 45 Hz 29 to µa 0.6 µa 45 Hz to 1 khz 29 to µa 0.5 µ A 1 khz to 5 khz 29 to µa 1.2 µa 5 khz to 10 khz 29 to µa 2.6 µa 10 khz to 30 khz 29 to µa 5.1 µa Issue: 12/2017 This supplement is in conjunction with certificate #L Page 10 of 14

11 10 Hz to 20 Hz 0.33 ma to ma 6.3 µa 20 Hz to 45 Hz 0.33 ma to ma 4 µa 45 Hz to 1 khz 0.33 ma to ma 3.3 µa 1 khz to 5 khz 0.33 ma to ma 6.4 µa 5 khz to 10 khz 0.33 ma to ma 16 µa 10 khz to 30 khz 0.33 ma to ma 32 µa 10 Hz to 20 Hz 3.3 ma to ma 60 µa 20 Hz to 45 Hz 3.3 ma to ma 31 µa 45 Hz to 1 khz 3.3 ma to ma 19 µa 1 khz to 5 khz 3.3 ma to ma 31 µa 5 khz to 10 khz 3.3 ma to ma 69 µa 10 khz to 30 khz 3.3 ma to ma 0.13 ma 10 Hz to 20 Hz 33 ma to ma 0.6 m A 20 Hz to 45 Hz 33 ma to ma 0.31 ma 45 Hz to 1 khz 33 ma to ma 0.16 ma 1 khz to 5 khz 33 ma to ma 0.36 ma 5 khz to 10 khz 33 ma to ma 0.73 ma 10 khz to 30 khz 33 ma to ma 1.5 ma 10 khz to 45 Hz 0.33 ma to 1.1 A 2.3 ma 45 Hz to 1 khz 0.33 ma to 1.1 A 0.6 ma 1 khz to 5 khz 0.33 ma to 1.1 A 7.6 ma 5 khz to 10 khz 0.33 ma to 1.1 A 32 ma Issue: 12/2017 This supplement is in conjunction with certificate #L Page 11 of 14

12 10 Hz to 45 Hz 1.1 A to A 5.9 ma 45 Hz to 1 khz 1.1 A to A 1.9 ma 1 khz to 5 khz 1.1 A to A 0.02 A 5 khz to 10 khz 1.1 A to A 0.08 A 45 Hz to 100 Hz 3 A to A 8.9 ma 100 Hz to 1 khz 3 A to A 13 ma 1 khz to 5 khz 3 A to A 0.32 A 45 Hz to 100 Hz 11 A to 20.5 A 30 ma 100 Hz to 1 khz 11 A to 20.5 A 38 ma 1 khz to 5 khz 11 A to 20.5 A 0.59 A Capacitance 10 Hz to 10 khz 220 pf to pf 15 pf 10 Hz to 10 khz 0.4 nf to nf 14 pf 10 Hz to 3 khz 1.1 nf to nf 14 pf 10 Hz to 1 khz 3.3 nf to nf 19 pf 10 Hz to 1 khz 11nF to nf 50 nf 10 Hz to 1 khz 33 nf to nf 75 nf 10 Hz to 1 khz 110 nf to nf 0.4 nf 10 Hz to 600 Hz 0.33 µf to µf 1.3 nf 10 Hz to 300 Hz 1.1 µf to µf 4.1 nf 10 Hz to 150 Hz 3.3 µf to µf 13 nf 10 Hz to 120 Hz 11 µf to µf 38 nf 10 Hz to 80 Hz 33 µf to µf 15 µf Issue: 12/2017 This supplement is in conjunction with certificate #L Page 12 of 14

13 Capacitance 0 Hz to 50 Hz 110 µf to µf 0.36 µf 0 Hz to 20 Hz 0.33 mf to mf 1.2 µf 0 Hz to 6 Hz 1.1 mf to mf 3.6 µf 0 Hz to 2 Hz 3.3 mf to mf 13 µf 0 Hz to 0.6 Hz 11 mf to mf 44 µf 0 Hz to 0.2 Hz 33 mf to 110 mf 0.3 mf Chemical ph Meter F 4 ph to 10 ph ph ph Calibrations Buffers Conductivity Fixed Points F 84 ms/cm 0.5 ms/cm Buffer Analytic Solution ms/cm 0.5 ms/cm 1. The CMC (Calibration and Measurement Capability) stated for calibrations included on this scope of accreditation represents the smallest measurement uncertainty attainable by the laboratory when performing a more or less routine calibration of a nearly ideal device under nearly ideal conditions. It is typically expressed at a confidence level of 95 % using a coverage factor k (usually equal to 2). The actual measurement uncertainty associated with a specific calibration performed by the laboratory will typically be larger than the CMC for the same calibration since capability and performance of the device being calibrated and the conditions related to the calibration may reasonably be expected to deviate from ideal to some degree. 2. The laboratories range of calibration capability for all disciplines for which they are accredited is the interval from the smallest calibrated standard to the largest calibrated standard used in performing the calibration. The low end of this range must be an attainable value for which the laboratory has or has access to the standard referenced. Verification of an indicated value of zero in the absence of a standard is common practice in the procedure for many calibrations but by its definition it does not constitute calibration of zero capacity. 3. The presence of a superscript F means that the laboratory performs calibration of the indicated parameter at its fixed location. Example: Outside Micrometer F would mean that the laboratory performs this calibration at its fixed location. Issue: 12/2017 This supplement is in conjunction with certificate #L Page 13 of 14

14 4. The presence of a superscript O means that the laboratory performs calibration of the indicated parameter onsite at customer locations. Example: Outside Micrometer O would mean that the laboratory performs this calibration onsite at the customer s location. 5. The presence of a superscript FO means that the laboratory performs calibration of the indicated parameter both at its fixed location and onsite at customer locations. Example: Outside Micrometer FO would mean that the laboratory performs this calibration at its fixed location and onsite at customer locations. 6. Measurement uncertainties obtained for calibrations performed at customer sites can be expected to be larger than the measurement uncertainties obtained at the laboratories fixed location for similar calibrations. This is due to the effects of transportation of the standards and equipment and upon environmental conditions at the customer site which are typically not controlled as closely as at the laboratories fixed location. 7. The term L represents length in inches or millimeters appropriate to the uncertainty statement. 8. The term X proceeded by a number represents the number of times a lense system magnifies an image relative to its actual size. CMC stated as % of magnification represents the CMC of magnification expressed as a percentage of the total magnification. 9. The term Wt represents weight in pounds or grams (including SI multiple and submultiple units) appropriate to the uncertainty statement. 10. The term T represents temperature in Celsius appropriate to the uncertainty statement. Issue: 12/2017 This supplement is in conjunction with certificate #L Page 14 of 14