Certificate of Accreditation

Transcription

1 PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Metrología y Mantenimiento Industrial S.A. de C.V. Carretera Tampico Mante No C. Niños Héroes, Tampico, Tamaulipas, México. C.P (Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognized International Standard: ISO/IEC 17025:2005 This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (as outlined by the joint ISO-ILAC-IAF Communiqué dated January 2009): Mechanical, Electrical, Dimensional, Thermodynamic and Mass, Force and Weighing Devices Calibration (As detailed in the supplement) Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate. This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the Accreditation body s duty to observe and comply with the said rules. For PJLA: Initial Accreditation Date: Issue Date: Expiration Date: September 28, 2011 March 07, 2018 March 30, 2020 Tracy Szerszen President/Operations Manager Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver, Suite 1325 Troy, Michigan Accreditation No.: Certificate No.: L The validity of this certificate is maintained through ongoing assessments based on a continuous accreditation cycle. The validity of this certificate should be confirmed through the PJLA website: Page 1 of 12

2 Certificate of Accreditation: Supplement Contact Name: Elena Dominguez, Phone: Mechanical Torque Wrenches FO 60 lbf ft to 600 lbf ft 0.63 % of reading Electronic Torque Tester SNAP-ON QC4ETT600 Pressure Gauges FO 3 psi to 30 psi psi Digital Pressure Gauge, Druck DPI 104 (3 psi to 30 psi) 10 psi to 100 psi psi Digital Pressure Gauge, Druck DPI 104 (0 psi to 100 psi) 30 psi to 300 psi 0.17 psi Digital Pressure Gauge, Druck DPI 104 (0 psi to 300 psi) 50 psi to 500 psi 0.29 psi Digital Pressure Gauge, Fluke 700G07 (0 psi to 500 psi) 100 psi to psi 0.61 psi Digital Pressure Gauge, ASHCROFT 02089SD02L1000# (0 psi to psi) 200 psi to psi 1.2 psi Digital Pressure Gauge ASHCROFT SD02L2000# (0 psi to psi) 300 psi to psi 1.7 psi Digital Pressure Gauge, Fluke 700G29 (0 psi to psi) 500 psi to psi 3 psi Digital Pressure Gauge, Fluke 700G30 (0 psi to psi) psi to psi 6 psi Digital Pressure Gauge, Druck DPI 104-IS (0 psi to psi) 1500 psi to psi 8.8 psi Digital Pressure Gauge, Druck DPI 104 (0 psi to psi) psi to psi 12 psi Digital Pressure Gauge, Druck DPI 104 (0 psi to psi) Transducer Pressures F 40 psi a psi 0.02 % of reading Hydraulic Deadweight Tester Pressure M1900/4 Electrical Insulation Resistance 1 MΩ to 1 kv 1.2 % of reading Insulation Tester Checker Meter F 2 MΩ to 1 kv 1.2 % of reading Extech Instruments MΩ to 1 kv 1.2 % of reading 100 MΩ to 1 kv 1.7 % of reading 500 MΩ to 1 kv 3.5 % of reading Issue: 03/2018 This supplement is in conjunction with certificate # L Page 2 of 12

3 Certificate of Accreditation: Supplement Electrical Insulation Resistance 10 MΩ to 1 kv 1.2 % of reading Calibration Box for Insulation Testers Meter F CB MΩ to 1 kv 1.2 % of reading 1 GΩ to 1 kv 1.2 % of reading 10 GΩ to 1 kv 1.2 % of reading Calibration Box for Insulation Testers CB MΩ to 5 kv 1.3 % of reading 1 GΩ to 5 kv 1.3 % of reading 10 GΩ to 5 kv 1.3 % of reading Earth Resistance Meter F 1 Ω to 10 Ω 0.12 % of reading Standard Resistance Box 10 Ω to 100 Ω 0.12 % of reading General Resistance DA 74-3x DC Voltage F 100 Ω to Ω 0.12 % of reading 1 kω to 10 kω 0.12 % of reading 10 kω to 100 kω 0.12 % of reading 3.3 mv to 330 mv % of reading Fluke 5502 A Calibrator 0.33 V to 3.3 V % of reading 3.3 V to 33 V % of reading 33 V to 33 V % of reading 330 V to V % of reading AC Voltage 50 Hz to 10 khz 3.3 mv to 33 mv 0.13 % of reading 50 Hz to 10 khz 33 mv to 330 mv % of reading 50 Hz to 10 khz 0.33 V to 3.3 V % of reading 50 Hz to 10 khz 3.3 V to 33 V % of reading AC Voltage 50 Hz to 1 khz 33 mv to 330 mv % of reading 50 Hz to 1 khz 330 V to 1000 V % of reading 33 µa to 330 µa % of reading DC Current F 0.33 ma to 3.3 ma 0.02 % of reading 3.3 ma to 33 ma % of reading 33 ma to 330 ma 0.01 % of reading 0.33 A to 1.1 A % of reading 1.1 A to 3 A % of reading Issue: 03/2018 This supplement is in conjunction with certificate # L Page 3 of 12

4 Electrical DC Current F Certificate of Accreditation: Supplement 3 to 11 A % of reading Fluke 5502 A Calibrator 11 to 20 A % of reading DC Clamp Meters F 10 A to 16.5 A 0.21 % of reading Fluke 5002A Calibrator 25 A to 150 A 0.2 % of reading Fluke 5500 A Coil 150 A to A 0.2 % of reading AC Current 50 Hz to 1 khz 29 to 330 µa 0.12 % of reading 50 Hz to 1 khz 0.33 ma to 3.3 ma % of reading 50 Hz to 1 khz 3.3 ma to 33 ma % of reading 50 Hz to 1 khz 33 ma to 330 ma 0.08 % of reading 50 Hz to 1 khz 0.33 A to 1.1 A % of reading 50 Hz to 1 khz 1.1 A to 3 A % of reading AC Current 50 Hz to 100 Hz 3 A to 11 A % of reading 50 Hz to 100 Hz 11 A to 20 A 0.11 % of reading AC Current 100 Hz to 1 khz 3 A to 11 A 0.13 % of reading 100 Hz to 1 khz 11A to 20 A 0.25 % of reading Equipment to Meter AC Clamp 50 Hz to 440 Hz 10 A to 16.5 A 0.24 % of reading 50 Hz to 440 Hz 25 A to 150 A 0.24 % of reading 50 Hz to 440 Hz 150 A to A 0.23 % of reading Electrical Resistance F Fluke 5502 A Calibrator Fluke 5502A Calibrator Fluke 5500A Coil 1 Ω to 11 Ω 0.11 % of reading Fluke 5502A Calibrator 11 Ω to 33 Ω % of reading 33 Ω to 110 Ω % of reading 110 Ω to 330 Ω % of reading 0.33 kω to 1.1 kω % of reading 1.1 kω to 3.3 kω % of reading Issue: 03/2018 This supplement is in conjunction with certificate # L Page 4 of 12

5 Electrical Certificate of Accreditation: Supplement 3.3 kω to 11 kω % of reading Fluke 5502A Calibrator Electrical Resistance F 11 kω to 33 kω % of reading Type PT385, 100Ω F whit RTD Type PT385, 200Ω F Type PT385, 500Ω F Type PT385, 1 000Ω F 33 kω to 110 kω % of reading 110 kω to 330 kω % of reading 0.33 MΩ to 1.1 MΩ % of reading 1.1 MΩ to 3.3 MΩ % of reading 3.3 MΩ to 11 MΩ % of reading 11 MΩ to 33 MΩ % of reading 33 MΩ to 110 MΩ % of reading 110 MΩ to 330 MΩ 0.61 % of reading -200 C to -80 C 0.07 C Electrical Simulation of -80 C to 0 C 0.07 C RTD Output Fluke 5502A 0 ºC to 100 ºC 0.11 ºC 100 ºC to 300 ºC 0.13 ºC 300 ºC to 400 ºC 0.14 ºC 400 ºC to 630 ºC 0.16 ºC -200 C to -80 C C -80 C to 0 C C 0 C to 100 C C 100 C to 260 C 0.07 C 260 C to 300 C 0.11 C 300 C to 400 C 0.12 C 400 C to 630 C 0.12 C -200 C to -80 C C -80 C to 0 C 0.07 C 0 ºC to 100 ºC 0.1 ºC 100 ºC to 260 ºC 0.11 ºC 260 ºC to 300 ºC 0.12 ºC 300 ºC to 400 ºC 0.12 ºC 400 ºC to 630 ºC 0.13 ºC -200 C to -80 C C -80 C to 0 C C 0 ºC to 100 ºC ºC Issue: 03/2018 This supplement is in conjunction with certificate # L Page 5 of 12

6 Certificate of Accreditation: Supplement Electrical Type PT385, 1 000Ω F whit RTD Type PT391 6, 100 Ω F whit RTD Type PT3926, 100Ω F whit RTD Type PT Ni385, 120Ω F whit RTD Type Cu427, 10Ω F Thermocouple Type B F Thermocouple Type C F 100 ºC to 260 ºC 0.1 ºC Electrical Simulation of 260 ºC to 300 ºC 0.11 ºC RTD Output Fluke 5502A 300 ºC to 400 ºC 0.11 ºC 400 ºC to 630 ºC 0.11 ºC -200 C a -190 C 0.2 C 190 C to -80 C C -80 C to 0 C 0.07 C 0 C to 100 C C 100 C to 260 C C 260 C to 300 C C 300 C to 400 C C 400 C to 600 C C -200 C a -80 C 0.07 C -80 C to 0 C 0.07 C 0 C to 100 C C 100 C to 300 C C 300 C to 400 C C 400 C to 600 C 0.11 C -80 C to 0 C C 0 C to 100 C C 100 C to 250 C 0.12 C -80 C a 250 C 0.24 C 600 C to 800 C 0.43 C Electrical Simulation of 800 C to C 0.35 C Thermocouple Output and Measured Fluke 5502A C to C 0.33 C C to C 0.37 C 25 C to 150 C 0.31 C 50 C to 650 C 0.29 C 650 C to C 0.46 C C to C 0.55 C C to C 0.76 C Issue: 03/2018 This supplement is in conjunction with certificate # L Page 6 of 12

7 Certificate of Accreditation: Supplement Electrical Thermocouple Type E F Thermocouple Type J F Equipment used Thermocouple Type K F Thermocouple Type N F Thermocouple Type R F Thermocouple Type S F Thermocouple Type T F -250 C to -100 C 0.41 C Electrical Simulation of -100 C to -25 C 0.18 C Thermocouple Output and Measured Fluke 5502A -25 C to 350 C 0.17 C 350 C to 650 C 0.18 C 650 C to 950 C 0.21 C -200 C to -100 C 0.25 C -100 C to -30 C 0.18 C -30 C to 150 C 0.17 C 150 C to 760 C 0.19 C 760 C to C 0.26 C -200 C to -100 C 0.3 C -100 C to - 25 C 0.19 C -25 C to 120 C 0.18 C 120 ºC to ºC 0.29 ºC ºC to ºC 0.44 ºC -200 C to -100 C 0.36 C -100 C to - 25 C 0.23 C -25 C to 120 C 0.22 C 120 C to 410 C 0.26 C 410 C to C 0.3 C 0 C to 250 C 0.52 C 250 C to 400 C 0.38 C 400 C to1 000 C 0.37 C C to C 0.44 C 0 C to 250 C 0.46 C 250 C to 400 C 0.4 C 400 C to C 0.41 C C to C 0.51 C -250 C to -150 C 0.53 C -150 C to 0 C 0.23 C 0 C to 120 C 0.18 C 120 C to 400 C 0.17 C Issue: 03/2018 This supplement is in conjunction with certificate # L Page 7 of 12

8 Electrical Certificate of Accreditation: Supplement Equipment to Output 0.03 mv to 100 mv % of reading Agilent 34401A DC Voltage F 0.1 V to 1 V % of reading Digital Multimeter Equipment to Output DC Current F Equipment to Resistance Electrical Output F 1 V to 10 V % of reading 10 V to 100 V % of reading 100 V to V % of reading 0.3 ma to 10 ma % of reading 10 ma to 100 ma % of reading 0.1 A to 1 A 0.13 % of reading 1 A to 3 A 0.24 % of reading 0.06 Ω to 100 Ω % of reading 0.1 kω to 1 kω % of reading 1 kω to 10 kω % of reading 10 kω to 100 kω % of reading 0.1 MΩ to 1 MΩ % of reading 1 MΩ to 10 MΩ % of reading 10 MΩ to 100 MΩ 0.81 % of reading Equipment to Output AC Voltage 10 Hz to 1 khz 5 mv to 100 mv 0.12 % of reading 10 Hz to 1 khz 0.1 V to 1 V 0.1 % of reading 10 Hz to 1 khz 1 V to 10 V 0.1 % of reading 10 Hz to 1 khz 10 V to 100 V 0.12 % of reading 10 Hz to 1 khz 100 V to 700 V 0.12 % of reading Equipment to Output AC Current 10 Hz to 1 khz 0.1 A to 1 A 0.60 % of reading 10 Hz to 1 khz 1 A to 3 A 0.33 % of reading DC Voltage F 3.3 mv to 330 mv % of reading Fluke 5500A Calibrator 0.33 V to 3.3 V % of reading 3.3 V to 33 V % of reading 33 V to 330 V % of reading 330 V to V % of reading Issue: 03/2018 This supplement is in conjunction with certificate # L Page 8 of 12

9 Electrical AC Voltage Certificate of Accreditation: Supplement 50 Hz to 10 khz 3.3 mv to 33 mv 0.15 % of reading 50 Hz to 10 khz 33 mv to 330 mv % of reading 50 Hz to 10 khz 0.33 V to 3.3 V % of reading 50 Hz to 10 khz 3.3 V to 33 V % of reading 50 Hz to 10 khz 33 V to 330 V % of reading 50 Hz to 10 khz 330 V to V % of reading DC Current F 0.33 ma to 3.3 ma % of reading 3.3 ma to 33 ma % of reading 33 ma to 330 ma % of reading 0.33 A to 2.2 A % of reading 2.2 A to 11 A % of reading Fluke 5500A Calibrator DC Clamp Meters F 10 A to 16.5 A % of reading Fluke 5500A Calibrator 25 A to 150 A % of reading Fluke 5500A Coil 150 A to 550 A % of reading AC Current 50 Hz to 1 khz 3.3 ma to 33 ma 0.08 % of reading 50 Hz to 1 khz 33 ma to 330 ma 0.024% of reading 50 Hz to 1 khz 0.33 A to 1.1 A % of reading 50 Hz to 1 khz 1.1 A to 3 A % of reading 50 Hz to 1 khz 3 A to 10 A % of reading Equipment to Meter AC Clamp 50 Hz to 300 Hz 10 A to 16.5 A 0.41 % of reading 50 Hz to 300 Hz 25 A to 150 A 0.38 % of reading 50 Hz to 300 Hz 150 A to 550 A 0.35 % of reading Electrical Resistance Measure F Fluke 5500A Calibrator Fluke 5500A Calibrator Fluke 5500A Coil 1 Ω to 11 Ω 0.10 % of reading Fluke 5500A Calibrator 11 Ω to 33 Ω % of reading 33 Ω to 110 Ω % of reading 110 Ω to 330 Ω % of reading Issue: 03/2018 This supplement is in conjunction with certificate # L Page 9 of 12

10 Electrical Certificate of Accreditation: Supplement Electrical Resistance 0.33 kω to 1.1 kω % of reading Fluke 5500A Calibrator Measure F 1.1 kω to 3.3 kω % of reading Type PT385, 100 Ω F Type PT385, 500 Ω F Type PT385, 1000 Ω F Thermocouple Type J F Thermocouple Type K F 3.3 kω to 11 kω % of reading 11 kω to 33 kω % of reading 33 kω to 110 kω % of reading 110 kω to 330 kω % of reading 0.33 MΩ to 1.1 MΩ % of reading 1.1 MΩ to 3.3 MΩ % of reading 3.3 MΩ to 11 MΩ % of reading 11 MΩ to 33 MΩ 0.12 % of reading 33 MΩ to 110 MΩ 0.51 % of reading 110 MΩ to 330 MΩ 0.54 % of reading 0 ºC to 100 ºC 0.11 ºC Electrical Simulation of 100 ºC to 300 ºC 0.13 ºC RTD Output Fluke 5500A 300 ºC to 400 ºC 0.14 ºC 400 ºC to 630 ºC 0.16 ºC 630 ºC to 800 ºC 0.28 ºC 0 ºC to 100 ºC 0.1 ºC 100 ºC to 260 ºC 0.11 ºC 260 ºC to 300 ºC 0.12 ºC 300 ºC to 400 ºC 0.12 ºC 400 ºC to 630 ºC 0.13 ºC 0 ºC to 100 ºC ºC 100 ºC to 260 ºC 0.1 ºC 260 ºC to 300 ºC 0.11 ºC 300 ºC to 400 ºC 0.11 ºC 400 ºC to 630 ºC 0.11 ºC 0 C to 150 C 0.18 C Electrical Simulation of 150 C to 760 C 0.21 C Thermocouple Output and Measured Fluke 5500A 760 C to C 0.28 C 0 C to 120 C 0.2 C 120 C to C 0.31 C C to C 0.47 C Issue: 03/2018 This supplement is in conjunction with certificate # L Page 10 of 12

11 Certificate of Accreditation: Supplement Electrical High Voltage Generator AC (60 Hz) F High Voltage Generator DC F 1 kv to 23 kv 5 % of reading Fluke 80K kv to 20 kv 2.1 % of reading 20kV to 31 kv 1.2 % of reading Mass, Force and Weighing Devices Balances and Scales O 20 g to 400 g (Res.= 1 mg) g to g (Res.= 10 g) 20 kg to kg (Res.= 100 g) ( x 10-3 Wt) mg OIML Class F2 ( x 10-6 Wt) g OIML Class F2 OIML Class M1 ( x 10-4 Wt) g OIML Class M2 OIML Class M1 Thermodynamic Analog Thermometers FO 0 ºC to 140 ºC 0.54 ºC Dry Well Calibrator Temperature Measure 0 ºC to 140 ºC 0.41 ºC Fluke 9103 Devices FO Hygrometers and Recorders F Dimensional 11 % HR to 93 % HR 3.2 % HR Digital Hygrometer CEM DT-321S (0 % HR to 100 % HR) Calipers F in to 6 in ( x 10-1 L) µin Gage Blocks (Grade 0) Starrett Indicators F in to 1 in ( x 10-1 L) µin Dial Gage Tester Mitutoyo UDT-ID MM Micrometers (Outsides) F in to 6 in ( x L) µin Gage Blocks (Grade 0) Starrett Issue: 03/2018 This supplement is in conjunction with certificate # L Page 11 of 12

12 Dimensional Certificate of Accreditation: Supplement Measuring Tapes F 3 mm to mm ( x 10-6 L) mm Standard Steel Ruler Mitutoyo / Graduated Scale Mitutoyo Thickness Gauges F in to in (9.29 x x 10-7 L) in Film Thickness Ultrasonic Thickness Gauge F 0.1 in to 0.5 in (9.54 x x 10-4 L) in Stepped Block (5) Defelsko 1. The CMC (Calibration and Measurement Capability) stated for calibrations included on this scope of accreditation represents the smallest measurement uncertainty attainable by the laboratory when performing a more or less routine calibration of a nearly ideal device under nearly ideal conditions. It is typically expressed at a confidence level of 95 % using a coverage factor k (usually equal to 2). The actual measurement uncertainty associated with a specific calibration performed by the laboratory will typically be larger than the CMC for the same calibration since capability and performance of the device being calibrated and the conditions related to the calibration may reasonably be expected to deviate from ideal to some degree. 2. The laboratories range of calibration capability for all disciplines for which they are accredited is the interval from the smallest calibrated standard to the largest calibrated standard used in performing the calibration. The low end of this range must be an attainable value for which the laboratory has or has access to the standard referenced. Verification of an indicated value of zero in the absence of a standard is common practice in the procedure for many calibrations but by its definition it does not constitute calibration of zero capacity. 3. The presence of a superscript F means that the laboratory performs calibration of the indicated parameter at its fixed location. Example: Outside Micrometer F would mean that the laboratory performs this calibration at its fixed location. 4. The presence of a superscript O means that the laboratory performs calibration of the indicated parameter onsite at customer locations. Example: Outside Micrometer O would mean that the laboratory performs this calibration onsite at the customer s location. 5. The presence of a superscript FO means that the laboratory performs calibration of the indicated parameter both at its fixed location and onsite at customer locations. Example: Outside Micrometer FO would mean that the laboratory performs this calibration at its fixed location and onsite at customer locations. 6. Measurement uncertainties obtained for calibrations performed at customer sites can be expected to be larger than the measurement uncertainties obtained at the laboratories fixed location for similar calibrations. This is due to the effects of transportation of the standards and equipment and upon environmental conditions at the customer site which are typically not controlled as closely as at the laboratories fixed location. 7. The term L represents length in inches or millimeters as appropriate to the uncertainty statement. 8. The term Wt represents weight in pounds or grams (including SI multiple and submultiple units) appropriate to the uncertainty statement. Issue: 03/2018 This supplement is in conjunction with certificate # L Page 12 of 12