Certificate of Accreditation

Transcription

1 PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognized International Standard: ISO/IEC 17025:2005 This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (as outlined by the joint ISO-ILAC-IAF Communiqué dated January 2009): Dimensional, Mechanical, Electrical, Time and Frequency, and Thermodynamic Calibration (As detailed in the supplement) Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate. This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the Accreditation body s duty to observe and comply with the said rules. For PJLA: Initial Accreditation Date: Issue Date: Expiration Date: November 23, 2013 June 9, 2016 June 30, 2018 Tracy Szerszen President/Operations Manager Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver, Suite 1325 Troy, Michigan Accreditation No.: Certificate No.: L The validity of this certificate is maintained through ongoing assessments based on a continuous accreditation cycle. The validity of this certificate should be confirmed through the PJLA website: Page 1 of 11

2 Dimensional AND Micrometers Outside FO 0.05 in to 48 in ( L) µin Gage Blocks, Scherr Tumico End Measuring Rod Standards Micrometer Depth FO 0.05 in to 12 in (95 + 9L) µin Gage Blocks Size Control Depth Master Dial Indicators FO 0.1 in to 2 in 91 µin Mitutoyo Digital Micrometer Head Calipers (OD, ID, Depth) FO 0.05 in to 24 in ( L) µin Size Control Kalmaster Size Control Depth Master Gage Blocks FO in to 4 in ( L) µin Gage Blocks Tesa Module Gage Block Calibrator Length Standards FO 1 in to 48 in ( L) µin Scherr Tumico End Measuring Rod Standards Micrometer Head Dial Indicator Pin Gages//Pain Plug Gauges FO in to 2 in 76 µin Master Plug Gage Z- Mike Laser Micrometer Surface Roughness Gages FO 16/118 µl 0.4/3 µl 7.4 µin Precision Roughness Specimen Surface Finish 16 µin Ra 3.1 µin Ra Mahr Precision Equipment/Profilometers FO Roughness Specimen 118 µin Ra Mass, Force, and Weighing Devices AND Balances O 1 g to 10 kg 260 mg NIST Handbook (Class F) test weights Issue 06/2016 This supplement is in conjunction with certificate #L Page 2 of 11

3 Mechanical AND Pressure FO 5 psig to 300 psig 1.4 psig Portable Pressure Calibrator (Druck DPI610PC) 100 psi to psi 0.82% of reading Deadweight Pressure System (Mansfield & Green T-100) Torque FO 10 ft lb to 100 ft lb 1.1 ft lb Torque Calibrator Mark-10 Mtt SNAP-ON DTT 60 ft lb to 600 ft lb 4.6 ft lb Torque Calibrator Mark-10 Mtt SNAP-ON DTT Electrical AND Equipment to measure DC 0 mv to 320 mv 35.9 µv µv/v Fluke 5520A Voltage FO 320 mv to 3.2 V 193 µv µv/v 3.2 V to 32 V 193 µv µv/v 32 V to 320 V 3.2 mv mv/v 320 V to V 69 mv mv/v Equipment to output 0 mv to 100 mv 7.6 µv + 1 µv/v Agilent 34401A DC Voltage FO 100 mv to 1 V 4.1 µv µv/v 1V to 100 V 4.1 µv µv/v 10 V to 100 V 6.6 µv µv/v 100 V to V 6.6 µv µv/v Issue 06/2016 This supplement is in conjunction with certificate #L Page 3 of 11

4 Electrical AND 10 Hz to 3 khz 0.4 V to 10 mv 95.2 µv µv/v Fluke 5520A 3 khz to 10 khz 0.4 V to 10 mv 95.2 µv µv/v 10 khz to 30 khz 0.4 V to 10 mv 95.3 µv µv/v 30 khz to 50 khz 0.4 V to 10 mv µv mv/v 50 khz to 100 khz 0.4 V to 10 mv µv mv/v 10 Hz to 3 khz 10 mv to 32 mv 95.9 µv + 96 µv/v Fluke 5520A 3 khz to 10 khz 10 mv to 32 mv 95.9 µv µv/v 10 khz to 30 khz 10 mv to 32 mv 96.9 µv µv/v 30 khz to 50 khz 10 mv to 32 mv µv µv/v 50 khz to 100 khz 10 mv to 32 mv µv mv/v 10 Hz to 3 khz 32 mv to 320 mv 172 µv µv/v Fluke 5520A 3 khz to 10 khz 32 mv to 320 mv 172 µv µv/v 10 khz to 30 khz 32 mv to 320 mv µv + 48 µv/v 30 khz to 50 khz 32 mv to 320 mv µv + 96 µv/v 50 khz to 100 khz 32 mv to 320 mv µv µv/v 10 Hz to 3 khz 320 mv to 3.2 V mv µv/v Fluke 5520A 3 khz to 10 khz 320 mv to 3.2 V mv µv/v 10 khz to 30 khz 320 mv to 3.2 V 97.7 mv µv/v 30 khz to 50 khz 320 mv to 3.2 V mv µv/v 50 khz to 100 khz 320 mv to 3.2 V mv µv/v Issue 06/2016 This supplement is in conjunction with certificate #L Page 4 of 11

5 Electrical Certificate of Accreditation: Supplement AND 10 Hz to 3 khz 3.2 V to 32 V mv mv/v Fluke 5520A 3 khz to 10 khz 3.2 V to 32 V mv mv/v 10 khz to 30 khz 3.2 V to 32 V mv +4.8 mv/v 30 khz to 50 khz 3.2 V to 32 V mv mv/v 50 khz to 100 khz 3.2 V to 32 V mv mv/v 10 Hz to 3 khz 32 V to 105 V 72.4 mv mv/v Fluke 5520A 3 khz to 10 khz 32 V to 105 V 86.3 mv mv/v 10 khz to 30 khz 32 V to 105 V mv mv/v 30 khz to 50 khz 32 V to 105 V mv mv/v 50 khz to 100 khz 32 V to 105 V mv mv/v 40Hz to 1 khz 105 V to 320 V mv mv/v Fluke 5520A 1 khz to 3 khz 105 V to 320 V mv mv/v 3 khz to 10 khz 105 V to 320 V mv + 32 mv/v 10 khz to 20 khz 105 V to 320 V mv + 48 mv/v 20 khz to 30 khz 105 V to 320 V mv + 64 mv/v 40 Hz to 1 khz 320 V to 800 V 2.3 V + 63 mv/v Fluke 5520A 1 khz to 3 khz 320 V to 800 V 2.5 V + 63 mv/v 3 khz to 10 khz 320 V to 800 V 3.2 V mv/v 10 khz to 20 khz 320 V to 800 V 3.4 V mv/v 20 khz to 30 khz 320 V to 800 V 3.6 V mv/v 40 Hz to 1 khz 800 V to V 2.6 V mv/v Fluke 5520A 1 khz to 3 khz 800 V to V 2.8 V mv/v 3 khz to 10 khz 800 V to V 2 V mv/v 10 khz to 20 khz 800 V to V 2.4 V mv/v Issue: 06/2016 This supplement is in conjunction with certificate #L Page 5 of 11

6 Electrical Certificate of Accreditation: Supplement AND Equipment to output AC Voltage 1 Hz to 10 Hz 1 mv to 100 mv 123 µv+70 µv/v Agilent 34401A 10 Hz to 40 Hz 1 mv to 100 mv 123 µv+20 µv/v 40 Hz to 100 Hz 1 mv to 100 mv 105 µv+20 µv/v 100 Hz to 2 khz 1 mv to 100 mv 104 µv+10 mv/v 2 khz to 10 khz 1 mv to 100 mv 103 µv+20 mv/v 10 khz to 30 khz 1 mv to100 mv 304 µv+40 mv/v 30 khz to 100 khz 1 mv to100 mv 706 µv+100 mv/v Equipment to output AC Voltage 1 Hz to 10 Hz 1 V to 100 V 105µV +60µV/V Agilent 34401A 10 Hz to 40 Hz 1 V to 100 V 104µV+10µV/V 40 Hz to 100 Hz 1 V to 100 V 82µV+10µV/V 100 Hz to 2 khz 1 V to 100 V 63µV+10mV/V 2 khz to 10 khz 1 V to 100 V 82µV+10mV/V 10 khz to 30 khz 1 V to 100 V 201µV+20mV/V 30 khz to 100 khz 1 V to 100 V 501µV+100mV/V Equipment to output AC Voltage 100 khz to 300 khz 1 V to 100 V 1.22 % range % reading Agilent 34401A Equipment to output AC Voltage 300 khz to 1 MHz 1 V to 100 V 3.06 % range % reading Agilent 34401A Equipment to output AC Voltage 1 Hz to 10 Hz 100 V to V 104 µv + 70 µv/v Agilent 34401A 10 Hz to 40 Hz 100 V to V 104 µv + 20 µv/v 40 Hz to10 khz 100 V to V 85 µv + 20 µv/v 10 khz to 30 khz 100 V to V 284 µv + 40 mv/v 30 khz to 100 khz 100 V to V 539 µv mv/v Issue: 06/2016 This supplement is in conjunction with certificate #L Page 6 of 11

7 Electrical Temperature Calibration, Indication and Control Equipment used with Thermocouple Type E FO Temperature Calibration, Indication and Control Equipment used with Thermocouple Type J FO Temperature Calibration, Indication and Control Equipment used with Thermocouple Type K FO Temperature Calibration, Indication and Control Equipment used with AND -250 C to C 1.9 C Fluke 5520A -210 C to C 1.9 C -250 C to C 2 C -250 C to 400 C 2 C Thermocouple Type T FO Equipment to measure 100 mω to 40 Ω 70 mω µω/ω Fluke 5520A Resistance FO 40 Ω to 4 kω 104 mω µω/ω 4 kω to 40 kω 802 mω µω/ω 40 kω to 400 kω 71 Ω µω/ω 400 kω to 4 MΩ 266 Ω µω/ω 4 MΩ to 40 MΩ 142 kω µω/ω 40 MΩ to 400 MΩ 161 kω µω/ω Equipment to output 50 mω to10 Ω 13 µω + 2 µω/ω Agilent 34401A Resistance FO 10 Ω to 100 Ω 9 µω + 3 µω/ω 100 Ω to 1 kω 7 mω mω/kω 1 kω to 10 kω 7 mω mω/kω 10 kω to 100 kω 7 mω mω/kω 100 kω to 1 MΩ 12 Ω Ω/MΩ 1 MΩ to 10 MΩ 13 Ω + 20 Ω/MΩ 10 MΩ to 100 MΩ 47 Ω Ω/MΩ 100 MΩ to 1 GΩ 47 Ω Ω/MΩ Issue 06/2016 This supplement is in conjunction with certificate #L Page 7 of 11

8 AND Equipment to measure DC 3.2 µa to 32µA 500 ma + 11 ma/a Fluke 5520A Current FO 32 µa to 320 µa 71 µa + 83 ma/a 320 µa to 3.2 ma 84 µa ma/a 3.2 ma to 32 ma 519 µa µa/a 32 ma to 320 ma 122 ma µa/a 0.32 A to 3.2 A 107 ma µa/a 3.2 A to 10.5 A 142 ma ma/a 10.5 A to 20 A 2 % of reading 20 A to 750 A 2 % of reading Equipment to output 80 µa to 100 µa 26 µa + 2 µa/a Agilent 34401A DC Current FO 100 µa to 1 ma 26 µa + 2 µa/a 1 ma to 10 ma 26 µa + 2 µa/a 10 ma to100 ma 51 µa + 5 µa/a 100 ma to 1 A 151 µa + 10 µa/a 10 Hz to 3 khz 1 ma to 32 ma 258 µa µa/a Fluke 5520A 10 Hz to 3 khz 1 ma to 32 ma 455 µa µa/a 10 khz to 20 khz 1 ma to 32 ma 461 µa µa/a 20 khz to 30 khz 1 ma to 32 ma 521 µa + 22 µa/a 10 Hz to 3 khz 32 ma to 320 ma 758 µa + 32 µa/a Fluke 5520A 3 khz to10 khz 32 ma to 320 ma 820 µa + 48 µa/a 10 khz to 20 khz 32 ma to 320 ma 768 µa + 64 µa/a 20 khz to 30 khz 32 ma to 320 ma 859 µa + 96 µa/a Fluke 5520A Issue 06/2016 This supplement is in conjunction with certificate #L Page 8 of 11

9 Electrical AND 10 Hz to 3 khz 320 ma to 3.2 A 210 ma µa/a Fluke 5520A 3 khz to10 khz 320 ma to 3.2 A 460 ma ma/a 10 Hz to 3 khz 3.2 A to 10.5 A 320 ma + 3 ma/a Fluke 5520A 3 khz to10 khz 3.2 A to 10.5 A 593 ma + 10 ma/a 10 Hz to 3 khz 10.5 A to 20 A 472 ma ma/a Fluke 5520A 3 khz to10 khz 10.5 A to 20 A 602 ma + 23m A/A 10 Hz to 30 khz 20 A to 750 A 1.7 % of reading Fluke 5520A Equipment to output AC Current 10 Hz to 5 khz 1 ma to 10 ma 216 µa µa/a Agilent 34401A 10 Hz to 5 khz 10 ma to 100 ma 216 µa µa/a 10 Hz to 1 khz 100 ma to 1 A 508 µa µa/a Bandwidth FO 50 khz to 600 MHz 5.1 % of reading Fluke reference 6div Time Marker Output FO 2 ns to 100ms 3.9 % of reading Amplitude FO 5 mv to 5.5Vp-p 2.3 % of reading Time and Frequency AND Equipment to measure 10 Hz to 100 Hz 0.15 Hz Fluke 5520A Frequency FO 100 Hz to 1 khz 0.16 Hz 1 khz to 10 khz 0.6 Hz 10 khz to 100 khz 6 Hz 100 khz to 1 MHz 6 khz 1 MHz to 10 MHz 6 khz Hewlett Packard 8648C 10 MHz to 100 MHz 6 khz Signal Generator 100 MHz to 300 MHz 6 khz Issue 06/2016 This supplement is in conjunction with certificate #L Page 9 of 11

10 Time and Frequency Certificate of Accreditation: Supplement AND Equipment to measure 1 MHz to 10 MHz 62 Hz Hewlett Packard 8648C Frequency FO 10 MHz to 100 MHz 610 Hz Signal Generator 100 MHz to 500 MHz 3.1 khz 500 MHz to 1 GHz 6.1 khz Tektronix FCA GHz to 2 GHz 13 khz Timer/Counter/Analyzer 1 GHz to 3.2 GHz 13 khz 10 Hz to 100 Hz 0.15 Hz 100 Hz to 1 khz 0.16 Hz 1 khz to 10 khz 0.6 Hz 10 khz to 100 khz 6 Hz 100 khz to 1 MHz 6 khz 1 MHz to 10 MHz 6 khz 10 MHz to 100 MHz 6 khz 100 MHz to 300 MHz 6 khz 1 MHz to 10 MHz 62 Hz 10 MHz to 100 MHz 610 Hz 100 MHz to 500 MHz 3.1 khz 500 MHz to 1 GHz 6.1 khz 1 GHz to 2 GHz 13 khz Thermodynamics Equipment to Measure Temperature FO 0 to 150 C 1.6 C Fluke 725 Dry Block Calibrator Omega PT Temperature Probe 1. The CMC (Calibration and Measurement Capability) stated for calibrations included on this scope of accreditation represent the smallest measurement uncertainties attainable by the laboratory when performing a more or less routine calibration of a nearly ideal device under nearly ideal conditions. It is expressed at a confidence level of 95 % using a coverage factor k (usually equal to 2). The actual measurement uncertainty associated with a specific calibration performed by the laboratory will typically be larger than the CMC for the same calibration since capability and performance of the device being calibrated and the conditions related to the calibration may reasonably be expected to deviate from ideal to some degree. Issue: 06/2016 This supplement is in conjunction with certificate #L Page 10 of 11

11 2. The laboratories range of calibration capability for all disciplines for which they are accredited is the interval from the smallest calibrated standard to the largest calibrated standard used in performing the calibration. The low end of this range must be an attainable value for which the laboratory has or has access to the standard referenced. Verification of an indicated value of zero in the absence of a standard is common practice in the procedure for many calibrations but by its definition it does not constitute calibration of zero capacity. 3. The presence of a superscript O means that the laboratory performs calibration of the indicated parameter onsite at customer locations. Example: Outside Micrometer O would mean that the laboratory performs this calibration onsite at the customer s location. 4. The presence of a superscript FO means that the laboratory performs calibration of the indicated parameter both at its fixed location and onsite at customer locations. Example: Outside Micrometer FO would mean that the laboratory performs this calibration at its fixed location and onsite at customer locations. Issue: 06/2016 This supplement is in conjunction with certificate #L Page 11 of 11