H11L1M, H11L2M, H11L3M 6-Pin DIP Optocoupler

Transcription

1 HLM, HLM, HL3M 6-Pin DIP Optocoupler Features High data rate, MHz typical (NRZ) Free from latch up and oscilliation throughout voltage and temperature ranges. Microprocessor compatible drive Logic compatible output sinks 6mA at 0.4V maximum Guaranteed on/off threshold hysteresis Wide supply voltage capability, compatible with all popular logic systems Underwriters Laboratory (UL) recognized file #E90700, Volume VDE recognized File#0497 Add option V (e.g., HLIVM) Description September 009 The HLXM series has a high speed integrated circuit detector optically coupled to a gallium-arsenide infrared emitting diode. The output incorporates a Schmitt trigger, which provides hysteresis for noise immunity and pulse shaping. The detector circuit is optimized for simplicity of operation and utilizes an open collector output for maximum application flexibility. Applications Logic to logic isolator Programmable current level sensor Line receiver eliminate noise and transient problems A.C. to TTL conversion square wave shaping Digital programming of power supplies Interfaces computers with peripherals Schematic Package Outlines ANODE 6 V CC CATHODE 5 GND Truth Table 3 4 V O Input Output H L L H HLM, HLM, HL3M Rev..0.3

2 Absolute Maximum Ratings (T A = 5 C unless otherwise specified.) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameters Value Units TOTAL DEVICE EMITTER T STG Storage Temperature -40 to +50 C T OPR Operating Temperature -40 to +85 C T SOL Lead Solder Temperature 60 for 0 sec C P D Total Device Power 5 C 50 mw Derate Above 5 C.94 mw/ C I F Continuous Forward Current 60 ma V R Reverse Voltage 6 V I F (pk) Forward Current Peak (µs pulse, 300pps) 3.0 A P D LED Power Dissipation 5 C Ambient 0 mw Derate Linearly From 5 C.4 mw/ C DETECTOR P D Detector Power 5 C 50 mw Derate Linearly from 5 C.0 mw/ C V O V 45 Allowed Range 0 to 6 V V CC V 65 Allowed Range 3 to 6 V I O I 4 Output Current 50 ma HLM, HLM, HL3M Rev..0.3

3 Electrical Characteristics (T A = 5 C Unless otherwise specified.) Individual Component Characteristics Symbol Parameters Test Conditions Device Min. Typ. Max. Units EMITTER V F Input Forward Voltage I F = 0mA All..5 V I F = 0.3mA I R Reverse Current V R = 3V All 0 µa C J Capacitance V = 0, f =.0MHz All 00 pf DETECTOR V CC Operating Voltage Range All 3 5 V I CC(off) Supply Current I F = 0, V CC = 5V All ma I OH Output Current, High I F = 0, V CC = V O = 5V All 00 µa Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Units DC CHARACTERISTICS I CC(on) Supply Current I F = 0mA, V CC = 5V All ma V OL Output Voltage, low R L = 70Ω,V CC = 5V, All V I F = I F(on) max. I F(on) Turn-On Threshold Current () R L = 70Ω, V CC = 5V HLM.6 ma HLM 0.0 HL3M 5.0 I F(off) Turn-Off Threshold Current R L = 70Ω, V CC = 5V All ma I F(off) /I F(on) Hysteresis Ratio R L = 70Ω, V CC = 5V All AC CHARACTERISTICS, Switching Speed t on Turn-On time R L = 70Ω, V CC = 5V, All.0 4 µs I F = I F(on), T A = 5 C t f Fall Time R L = 70Ω, V CC = 5V, All 0. µs I F = I F(on), T A = 5 C t off Turn-Off Time R L = 70Ω, V CC = 5V, All. 4 µs I F = I F(on), T A = 5 C t r Rise time R L = 70Ω, V CC = 5V, All 0. µs I F = I F(on), T A = 5 C Data Rate All.0 MHz Isolation Characteristics Symbol Parameter Test Conditions Min. Typ. Max. Units V ISO Input-Output Isolation Voltage t = sec V PEAK C ISO Isolation Capacitance V I-O = 0V, f = MHz pf R ISO Isolation Resistance V I-O = ±500 VDC 0 Ω Note:. Maximum I F(ON) is the maximum current required to trigger the output. For example, a.6ma maximum trigger current would require the LED to be driven at a current greater than.6ma to guarantee the device will turn on. A 0% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA. HLM, HLM, HL3M Rev

4 Safety and Insulation Ratings As per IEC , this optocoupler is suitable for safe electrical insulation only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 00/.89 Table For Rated Main Voltage < 50Vrms I-IV For Rated Main voltage < 300Vrms I-IV Climatic Classification 55/00/ Pollution Degree (DIN VDE 00/.89) CTI Comparative Tracking Index 75 V PR Input to Output Test Voltage, Method b, V IORM x.875 = V PR, 00% Production Test with tm = sec, Partial Discharge < 5pC 594 V peak Input to Output Test Voltage, Method a, V IORM x.5 = V PR, Type and Sample Test with tm = 60 sec, Partial Discharge < 5pC 75 V peak V IORM Max. Working Insulation Voltage 850 V peak V IOTM Highest Allowable Over Voltage 6000 V peak External Creepage 7 mm External Clearance 7 mm Insulation Thickness 0.5 mm RIO Insulation Resistance at Ts, V IO = 500V 0 9 Ω HLM, HLM, HL3M Rev

5 I C SUPPLY CURRENT (ma) I F(On), I F(Off) THRESHOLD CURRENT (NORMALIZED) I F THRESHOLD CURRENT (NORMALIZED) V OL - OUTPUT VOLTAGE, LOW (V) Typical Performance Curves O V OUTPUT VOLTAGE (V) Figure. Transfer Characteristics V OH I F(OFF) I F(ON) V OL I F INPUT CURRENT (ma) V CC = 5V R L = 70Ω T A = 5 C Figure 3. Threshold Current vs. Supply Temperature Figure. Threshold Current vs. Supply Voltage TURN ON THRESHOLD TURN OFF THRESHOLD V CC SUPPLY VOLTAGE (V) IF NORMALIZED TO: I F(ON) AT VCC = 5V T A = 5 o C Figure 4. Output Voltage, Low vs. Load Current NORMALIZED TO: VCC = 5V T A = 5 o C T A TEMPERATURE ( o C) 0. I F = I F(ON) V CC = 5V R L = 70Ω I O LOAD CURRENT (ma) 6 Figure 5. Supply Current vs. Supply Voltage Figure 6. LED Forward Voltage vs. Forward Current T A = 0 C I F = 5mA 5 C 70 C T A = 0 C 5 C 70 C I F = 0mA VF FORWARD VOLTAGE (V) T A = 55 C T A = 5 C T A = 00 C V CC SUPPLY VOLTAGE (V) I F LED FORWARD CURRENT (ma) HLM, HLM, HL3M Rev

6 Typical Performance Curves (Continued) t r = tf = 0.0µs Z = 50 V IN C R E I F HL I R L 4 70Ω V IN 5V Figure 7. Switching Test Circuit and Waveforms 5V V O 0 t on V O 90% t f 50% t off t r 0% HLM, HLM, HL3M Rev

7 Package Dimensions Through Hole Pin 5.08 (Max.) (Min.) (0.86).54 (Bsc) (Typ.) 7.6 (Typ.) " Lead Spacing Pin 5.08 (Max.) (Min.) (0.86).54 (Bsc) Surface Mount (.78) 6 4 (.5) (7.49) (0.54) (.54) Pin 3 (0.76) Rcommended Pad Layout (Max.) (Min.) (0.86).54 (Bsc) (8.3) Note: All dimensions in mm. HLM, HLM, HL3M Rev

8 Ordering Information Option Marking Information Order Entry Identifier (Example) Description No option HLM Standard Through Hole Device S HLSM Surface Mount Lead Bend SR HLSRM Surface Mount; Tape and Reel T HLTM 0.4" Lead Spacing V HLVM VDE 0884 TV HLTVM VDE 0884, 0.4" Lead Spacing SV HLSVM VDE 0884, Surface Mount SRV HLSRVM VDE 0884, Surface Mount, Tape and Reel HL V X YY Q Definitions Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE 3 option See order entry table) 4 One digit year code, e.g., 3 5 Two digit work week ranging from 0 to 53 6 Assembly package code *Note Parts that do not have the V option (see definition 3 above) that are marked with date code 35 or earlier are marked in portrait format. HLM, HLM, HL3M Rev

9 Tape Dimensions Note: All dimensions are in millimeters. Reflow Profile 4.5 ± ± ± 0.05 User Direction of Feed 4.0 ± MAX 0. ± ± 0..0 ± 0.05 Ø.5 MIN.75 ± ± ± ± 0.0 Ø.5 ± 0./-0 C C/Sec Ramp up rate 33 Sec Time (s) 60 C Time above 83 C = 90 Sec >45 C = 4 Sec 360 HLM, HLM, HL3M Rev

10 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,and is not intended to be an exhaustive list of all such trademarks. Auto-SPM Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic EcoSPARK EfficentMax EZSWITCH * * Fairchild Fairchild Semiconductor FACT Quiet Series FACT FAST FastvCore FETBench FlashWriter * FPS F-PFS FRFET Global Power Resource SM Green FPS Green FPS e-series Gmax GTO IntelliMAX ISOPLANAR MegaBuck MICROCOUPLER MicroFET MicroPak MillerDrive MotionMax Motion-SPM OPTOLOGIC OPTOPLANAR PDP SPM Power-SPM PowerTrench PowerXS Programmable Active Droop QFET QS Quiet Series RapidConfigure * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. Saving our world, mw/w/kw at a time SmartMax SMART START SPM STEALTH SuperFET SuperSOT -3 SuperSOT -6 SuperSOT -8 SupreMOS SyncFET Sync-Lock * The Power Franchise TinyBoost TinyBuck TinyLogic TINYOPTO TinyPower TinyPWM TinyWire TriFault Detect TRUECURRENT * µserdes UHC Ultra FRFET UniFET VCX VisualMax XS DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERSTHESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical andproduct information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Obsolete Formative / In Design First Production Full Production Not In Production Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. HLM, HLM, HL3M Rev Rev. I40