Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information.

Size: px

Start display at page:

Download "Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information."

Lawrence Newman
6 years ago
Views:

Choice of pins or wires mounting configuration Choice of aperture Choice of output

kbaud Low power consumption The OPB460, OPB470, OPB480 and OPB490 series of Photologic

Building from a standard housing with a 0.125 (3.

shell material, aperture width and choice of mounting configurations.

OPB480 through OPB493 have 24 (609 mm) 26 AWG wires (UL approved wires).

output. Devices are also TTI/LSTTL compatible and can drive up to 10 TTL loads.

Contact your local representative or OPTEK for more information.

limit indication Edge sensing Part Number Guide OPB460, OPB470, OPB480, OPB490 Series

Transmissive Shell, PCBoard Mountable 7 Opaque Shell, PCBoard Mountable 8 Transmissive

Buffered 10 kω Output 1 Buffered Open-Collector Output 2 Inverted 10 kω Output 3

1 Choice of pins or wires mounting configuration Choice of aperture Choice of output configuration Choice of opaque or IR transmissive shell material Data rates to 250 kbaud Low power consumption The OPB460, OPB470, OPB480 and OPB490 series of Photologic photo integrated circuit switches provide optimum flexibility for the design engineer. Building from a standard housing with a (3.180 mm) wide slot, a user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting configurations. OPB460 through OPB473 have ( mm) PCBoard leads with (8.1 mm) spacing. OPB480 through OPB493 have 24 (609 mm) 26 AWG wires (UL approved wires). All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be specified as buffered or inverted with 10 kw Pull-up or Open Collector output. Devices are also TTI/LSTTL compatible and can drive up to 10 TTL loads. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: Mechanical switch replacement Speed indication (tachometer) Mechanical limit indication Edge sensing Part Number Guide OPB460, OPB470, OPB480, OPB490 Series OPB 4 X X X 1 1 X OPTEK Assembly Photologic Sensor Family Discrete Housing Material: 6 Transmissive Shell, PCBoard Mountable 7 Opaque Shell, PCBoard Mountable 8 Transmissive Shell, Wire Termination 9 Opaque Shell, Wire Termination Electrical Specifications: 0 Buffered 10 kω Output 1 Buffered Open-Collector Output 2 Inverted 10 kω Output 3 Inverted Open-Collector Output All PCBoard Versions RoHS Compliant: Z = Wire Version RoHS Compliant Sensor Aperture: 1 = [0.25 mm] Emitter Aperture: 1 = [0.25 mm] Mounting Configurations: L Emitter side mounting tab only N No mounting tabs P Sensor side mounting tab only T Two mounting tabs RoHS

010 ] CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries

2 Color-Pin Red-1 Black-2 White-3 Blue-4 Green-5 Description Anode Cathode Vcc Output Ground TOLERANCE DIMENSIONS ARE: ±.25mm [±.010 ] CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK s molded plastics. Applies to: OPB460, OPB470, OPB480, OPB490.

3 Storage & Operating Temperature Range -40 C to +85 C Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] (1) 260 C Supply Voltage, V CC (not to exceed 3 seconds) Diode Forward DC Current Diode Reverse DC Voltage Input Diode Power Dissipation (2) 18 V 40 ma 2 V 75 mw Voltage at Output Lead (Open Collector Output) Output Photologic Power Dissipation (3) 25 V 200 mw Total Device Power Dissipation (4) 275 mw Notes: (1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (2) Derate linearly 1.67 mw/ C above 25 C (OPB460, OPB470) or derate linearly 1.82 mw/ C above 25 C (OPB480, OPB490). (3) Derate linearly 1.50 mw/ C above 25 C (OPB460, OPB470) or derate linearly 1.64 mw/ C above 25 C(OPB480, OPB490). (4) Derate linearly 3.17 mw/ C above 25 C (OPB460, OPB470) or derate linearly 3.45 mw/ C above 25 C (OPB480, OPB490). (5) The OPB460/OPB470 series are terminated with square leads designed for printed circuit board mounting. (6) The OPB480/OPB490 series of switches are terminated with 24 ( mm) of 7-strand 26 AWG, UL rated insulated wire on each terminal. Insulation colors and functions are: red (anode), black (cathode), white (V CC, ), blue (output) and green (ground). Other wire lengths and/or colors in addition to customer selected connectors are available. Contact your local representative or call the factory.

4 OPB460/470/480/490 Buffered 10K Pull-Up OPB461/471/481/491 Buffered Open-Collector OPB462/472/482/492 Inverted 10K Pull-Up OPB463/473/483/493 Inverted Open-Collector

5 V F Forward Voltage V I F = 20 ma, T A = 25 C I R Reverse Current µa V R = 2 V, T A = 25 C Output Photologic Sensor V CC Operating DC Supply Voltage V I CCL I CCH V OL V OH I OH Low Level Supply Current: Buffered with 10k pull-up (1) Buffered Open-Collector Output Inverted Open-Collector Output High Level Supply Current: Buffered with 10k pull-up Buffered Open-Collector Output Inverted Open-Collector Output Low Level Output Voltage: Buffered with 10k pull-up Buffered Open-Collector Output Inverted Open-Collector Output High Level Output Voltage: Buffered with 10k pull-up Inverted Open-Collector Output (1) High Level Output Voltage: Buffered Open-Collector Output ma V CC = 16 V, I F = 0 ma (1) ma V CC = 16 V, I F = 12 ma ma V CC = 16 V, I F = 12 ma ma V CC = 16 V, I F = 0 ma (1) V V CC = 4.5 V, I OL = 16 ma, I F = 0 ma V V CC = 4.5 V, I F = 12 ma (1) V CC -1.5 V CC V - - V µa V CC = 4.5 V to 16 V, No Load, I F = 12 ma V CC = 4.5 V to 16 V, No Load, I F = 0 ma V CC = 16 V, I F = 12 ma, V OH = 25 V, T A = 25 C Inverted Open-Collector Output (1) µa V CC = 16 V, I F = 0 ma, V OH = 25 V, T A = 25 C I F(+) LED Positive-Going Threshold Current ma V CC = 5 V, T A = 25 C I F(+)/ I F(-) Hysteresis V CC = 5 V t r t f Rise Time, Fall Time ns V CC = 5 V, T A = 25 C, I F = 0 or 12 ma t PLH t PHL Propagation Delay µs R L = 300 Ω to 5 V, C L = 50 pf Notes: (1) Normal application would be with light source blocked, simulated by I F = 0 ma. (2) All parameters tested using pulse technique.

6 OPB480T55 - Flag Next to Emitter OPB480T55 - Flag Next to Sensor (Back) (Back) (Back) (Back) (Back) (Back) OPB480T55 - Flag in Middle of Slot (Back) 0 (Back) Emitter Sensor (Back) 0 Width

7 OPB481N51 - Flag Next to Emitter OPB481N51 - Flag Next to Sensor (Back) (Back) (Back) (Back) (Back) (Back) OPB481N51 - Flag in Middle of Slot (Back) 0 (Back) Emitter (Back) Sensor 0 Width

8 OPB460N11 - Flag Next to Emitter OPB460N11 - Flag Next to Sensor (Back) (Back) (Back) (Back) OPB460N11 - Flag in Middle of Slot (Back) 0 (Back) Emitter Sensor 0 Width

Photologic Slotted Optical Switch OPB930 and OPB940 (L and W Series)

Photologic Slotted Optical Switch OPB930 and OPB940 (L and W Series) Features: Choice of aperture size Choice of output configurations Choice of opaque or IR transmissive shell Choice of pins (L) or wires (W) 0.125 (3.18 mm) slot width 0.320 (8.128 mm) lead spacing for