ISOCOM ICPL2530, ICPL2531 COMPONENTS DESCRIPTION ABSOLUTE MAXIMUM RATINGS APPLICATIONS ORDER INFORMATION

Size: px

Start display at page:

Download "ISOCOM ICPL2530, ICPL2531 COMPONENTS DESCRIPTION ABSOLUTE MAXIMUM RATINGS APPLICATIONS ORDER INFORMATION"

Shonda Cobb
5 years ago
Views:

1 DESCRIPTION The and dual channel devices each consists of an infrared emitting diode, optically coupled to a high speed photo detector transistor. A separate connection for the photodiode bias and output transistor collector increases the speed by several orders of magnitude over conventional phototransistor couplers by reducing the base-collector capacitance.. FEATURES High Speed 1Mbit/s High AC Isolation Voltage 5000V RMS Guaranteed Performance from 0 C to 70 C Wide Operating Temperature Range -40 C to 100 C Pb Free and RoHS Compliant Safety Approvals Pending APPLICATIONS Line Receivers Telecommunication Equipment Power Transistor Isolation in Motor Drives Replacement of Low Speed Phototransistor Optocouplers High Speed Logic Ground Isolation ORDER INFORMATION. Add G after PN for 10mm lead spacing Add SM after PN for Surface Mount, Add SMT&R after PN for Surface Mount Tape & Reel ABSOLUTE MAXIMUM RATINGS Input Diode Forward Current Peak Forward Current (50% duty cycle 1ms pulse width) Peak Transient Current ( 1μs pulse width, 300pps) Reverse Voltage Power dissipation Output Average Output Current Peak Output Current Output Voltage Supply Voltage Power Dissipation Total Package 1. Anode 2. Cathode 3. Cathode 4. Anode 5. Gnd 6. Vout2 7. Vout1 8. V CC 25mA 50mA 1A 5V 45mW 8mA 16mA -0.5 to 20V -0.5 to 30V 35mW Isolation Voltage 5000V RMS Operating Temperature -40 to 100 C Storage Temperature -55 to 125 C Lead Soldering Temperature (10s) 260 C 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate Hartlepool, Cleveland, TS25 1UD, United Kingdom Tel: +44 (0) Fax : +44 (0) sales@isocom.co.uk ASIA LTD Hong Kong Office, Block A, 8/F, Wah Hing Industrial mansion, 36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong. Tel: Fax : sales@isocom.com.hk 1 06/06/2013

2 ELECTRICAL CHARACTERISTICS INPUT (T A = 0 C to 70 C unless otherwise specified) Parameter Symbol Test Condition Min Typ.* Max Unit Forward Voltage V F I F = 16mA T A = 25 C V Reverse Voltage V R I R = 10µA 5.0 V Temperature Coefficient V F /T A I F = 16mA -1.9 mv/ C Input Capacitance C IN V F = 0V. f = 1MHz 60 pf OUTPUT (T A = 0 C to 70 C unless otherwise specified) Parameter Symbol Test Condition Min Typ.* Max Unit Logic High Output Current I OH I F = 0mA, V O = V CC = 5.5V, T A = 25 C µa I F = 0mA, V O = V CC = 15V, T A = 25 C 50 Logic Low Supply Current I CCL I F1 = I F2 = 16mA, V O = Open, V CC = 15V, µa Logic High Supply Current I CCH I F = 0mA, V O = Open V CC = 15V, T A = 25 C µa I F = 0mA, V O = Open V CC = 15V 4 * Typical Values at T A = 25 C 2 06/06/2013

3 ELECTRICAL CHARACTERISTICS COUPLED (T A = 0 C to 70 C unless otherwise specified) Parameter Symbol Test Condition Min Typ.* Max Unit Current Transfer Ratio CTR I F = 16mA, V O = 0.4V V CC = 4.5V, T A = 25 C % I F = 16mA, V O = 0.5V V CC = 4.5V 5 15 % Logic Low Output Voltage V OL I F = 16mA, I O = 1.1mA V CC = 4.5V, T A = 25 C V I F = 16mA, I O = 3mA V CC = 4.5V, T A = 25 C V I F = 16mA, I O = 0.8mA V CC = 4.5V 0.5 V I F = 16mA, I O = 2.4mA V CC = 4.5V 0.5 V * Typical Values at T A = 25 C 3 06/06/2013

4 ELECTRICAL CHARACTERISTICS Switching Characteristics (T A = 0 C to 70 C, Vcc = 5V, I F = 16mA. unless otherwise specified) Parameter Symbol Test Condition Min Typ.* Max Unit Propagation Delay Time to Logic Low t PHL R L = 4.1kΩ, T A = 25 C R L = 4.1kΩ μs R L = 1.9kΩ, T A = 25 C R L = 1.9kΩ Propagation Delay Time to Logic High t PLH R L = 4.1kΩ, T A = 25 C R L = 4.1kΩ μs R L = 1.9kΩ, T A = 25 C R L = 1.9kΩ Common Mode Transient Immunity at Logic High CM H I F = 0mA, V CM = 10Vp-p, R L = 4.1kΩ, T A = 25 C V/μs I F = 0mA, V CM = 1000Vp-p, R L = 1.9kΩ, T A = 25 C V/μs Common Mode Transient Immunity at Logic Low CM L I F = 16mA, V CM = 10Vp-p, R L = 4.1kΩ, T A = 25 C V/μs I F = 16mA, V CM = 1000Vp-p, R L = 1.9kΩ, T A = 25 C V/μs * Typical Values at T A = 25 C Common mode transient immunity in logic high level is the maximum tolerable (positive) dv CM /dt on the leading edge of the common mode pulse signal V CM, to assure that the output will remain in a logic high state (i.e. V O > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dv CM /dt on the trailing edge of the common mode pulse signal, V CM, to assure that the output will remain in a logic low state (i.e. V O < 0.8V). 4 06/06/2013

5 Fig 1 Forward Current vs Forward Voltage Fig 2 Output Current vs Output Voltage Fig 3 Normalized CTR vs Forward Current Fig 4 Normalized CTR vs Ambient Temperature Fig 5 Propagation Delay vs Load Resistance Fig 6 Propagation Delay vs Ambient Temperature 5 06/06/2013

6 Fig 7 Logic High Output Current vs T A Pulse Generator tr = 5ns ZO = 50Ω 10% Duty Cycle 1/f < 100μs Fig 8 Switching Time Test Circuit Fig 9 Transient Immunity Test Circuit 6 06/06/2013

7 ORDER INFORMATION After PN PN Description Packing quantity None Standard DIP8 45 pcs per tube G G 10mm Lead Spacing 45 pcs per tube SM SM Surface Mount 45 pcs per tube SMT&R SMT&R Surface Mount Tape & Reel 1000 pcs per reel After PN PN Description Packing quantity None Standard DIP8 45 pcs per tube G G 10mm Lead Spacing 45 pcs per tube SM SM Surface Mount 50 pcs per tube SMT&R SMT&R Surface Mount Tape & Reel 1000 pcs per reel 7 06/06/2013

8 PACKAGE DIMENSIONS (mm) DIP G FORM 8 06/06/2013

9 TEMP ( C) SMD REFLOW SOLDERING TEMPERATURE PROFILE 217 C 200 C 260 C (peak,10s Max) 60s 120 s >255 C (30s Max) 150 C 60s 100s 1-3 C/s Max TIME (s) 9 06/06/2013

10 Notes: - Isocom is continually improving the quality, reliability, function or design and Isocom reserves the right to make changes without further notices. - The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - For equipment/application where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc., please contact our sales representatives. - When requiring a device for any specific application, please contact our sales for advice. - The contents described herein are subject to change without prior notice. - Do not immerse unit s body in solder paste /06/2013

ISOCOM ICPL0600 / ICPL0601 / ICPL0611 COMPONENTS DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS (T A = 25 C) APPLICATIONS ORDER INFORMATION

ISOCOM ICPL0600 / ICPL0601 / ICPL0611 COMPONENTS DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS (T A = 25 C) APPLICATIONS ORDER INFORMATION DESCRIPTION The ICPL0600, ICPL0601 and ICPL0611 devices each consist of an infrared emitting diode, optically coupled to a high speed integrated photo detector logic gate with a strobable output. These