ISOCOM ICPL0600 / ICPL0601 / ICPL0611 COMPONENTS DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS (T A = 25 C) APPLICATIONS ORDER INFORMATION

Size: px

Start display at page:

Download "ISOCOM ICPL0600 / ICPL0601 / ICPL0611 COMPONENTS DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS (T A = 25 C) APPLICATIONS ORDER INFORMATION"

Annice Harvey
5 years ago
Views:

1 DESCRIPTION The ICPL0600, ICPL0601 and ICPL0611 devices each consist of an infrared emitting diode, optically coupled to a high speed integrated photo detector logic gate with a strobable output. These devices belong to Isocom Compact Range of Optocouplers No Connection 2. Anode 3. Cathode 4. No Connection 5. Gnd 6. Vout 7. V E 8. V CC FEATURES 4 5 Half Pitch 1.27mm High Speed 10Mbit/s 10kV/μs min. Common Mode Transient Immunity (ICPL0611) High AC Isolation voltage 3750V RMS Guaranteed Performance from -40 C to 85 C Wide Operating Temperature Range -40 C to 100 C Logic Gate Output Pb Free and RoHS Compliant Halogen Free Safety Approvals Pending APPLICATIONS Line Receivers, Data Communication LSTTL to TTL, LSTTL or 5V CMOS Data Multiplexing Pulse Transformer Replacement Switch Mode Power Supplies Ground Loop Elimination Computer Peripheral Interface ORDER INFORMATION Add T&R after PN for Surface Mount Tape & Reel A 0.1μF bypass capacitor must be connected between pins 8 and 5. ABSOLUTE MAXIMUM RATINGS () Input Diode Forward Current Reverse Voltage Power dissipation Output 20mA 5V 40mW Output Current 50mA Output Voltage 7.0V Supply Voltage 7.0V Enable Input Voltage 5.5V (maximum 500mV above V CC ) Enable Input Current 5mA Power Dissipation 85mW Total Package Isolation Voltage 3750V RMS Operating Temperature -40 to 100 C Storage Temperature -55 to 125 C Lead Soldering Temperature (10s) 260 C 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate Hartlepool, Cleveland, TS25 1UD, United Kingdom Tel: +44 (0) Fax : +44 (0) sales@isocom.co.uk ASIA LTD Hong Kong Office, Block A, 8/F, Wah Hing Industrial mansion, 36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong. Tel: Fax : sales@isocom.com.hk 1 5/12/2012 DC93162

2 Truth Table (Positive Logic) Input Enable Output H H L L H H H L H L L H H NC L L NC H ELECTRICAL CHARACTERISTICS (T A = -40 C to 85 C unless otherwise specified) INPUT Parameter Symbol Test Condition Min Typ.* Max Unit Forward Voltage V F I F = 10mA V Reverse Voltage V R I R = 10µA 5.0 V Temperature ΔV F /ΔT A I F = 10mA -1.8 mv/ C Coefficient of V F Input Capacitance C IN V F = 0V, f = 1MHz 60 pf OUTPUT Parameter Symbol Test Condition Min Typ.* Max Unit High Level Supply Current Low Level Supply Current High Level Enable Current Low Level Enable Current High Level Enable Voltage Low Level Enable Voltage I CCH I CCL I EH I F = 0mA, V E = 0.5V, 10 ma V CC = 5.5V I F = 10mA, V CC = 5.5V 13 ma V E = 2.0V, V CC = 5.5V -1.6 I EL V E = 0.5V, V CC = 5.5V -1.6 ma V EH I F = 10mA, V CC = 5.5V 2.0 V EL I F = 10mA, V CC = 5.5V 0.8 ma V V * Typical values at 2 5/12/2012 DC93162

3 ELECTRICAL CHARACTERISTICS (T A = -40 C to 85 C unless otherwise specified) COUPLED Parameter Symbol Test Condition Min Typ.* Max Unit High Level Output Current I OH V CC = 5.5V, V E = 2.0V, V O = 5.5V, I F = 250μA 100 μa Low Level Output Voltage V OL V CC = 5.5V, V E = 2.0V, I F = 5mA, I OL = 13mA 0.6 V Input Threshold Current I FT V CC = 5.5V, V E = 2.0V, V O = 0.6V, I OL = 13mA 5 ma Switching Characteristics (T A = -40 C to 85 C, V CC = 5V, I F = 7.5mA unless otherwise specified) Parameter Symbol Test Condition Min Typ.* Max Unit Propagation Delay Time to Output High Level Propagation Delay Time to Output Low level Pulse Width Distortion t PHL C L = 15pF, R L = 350Ω, t PLH C L = 15pF, R L = 350Ω, ns ns t PHL -t PLH C L = 15pF, R L = 350Ω ns Output Rise Time t r C L = 15pF, R L = 350Ω ns Output Fall Time t f C L = 15pF, R L = 350Ω ns Enable Propagation Delay Time to Output High Level Enable Propagation Delay Time to Output Low Level t ELH I F = 7.5mA, ns V EL = 0V, V EH = 3V, C L = 15pF, R L = 350Ω t EHL ns * Typical values at 3 5/12/2012 DC93162

4 ELECTRICAL CHARACTERISTICS (T A = -40 C to 85 C unless otherwise specified) Switching Characteristics (T A = -40 C to 85 C, V CC = 5V, I F = 7.5mA unless otherwise specified) Parameter Symbol Test Condition Min Typ.* Max Unit Common Mode Transient Immunity at Logic High Common Mode Transient Immunity at Logic Low CM H ICPL0600 (Fig 14) I F = 0mA, V OH = 2V, R L = 350Ω, V CM = 10Vp-p, ICPL0601 (Fig 14) I F = 0mA, V OH = 2V, R L = 350Ω, V CM = 50Vp-p, ICPL0611 (Fig 14) I F = 0mA, V OH = 2V, R L = 350Ω, V CM = 400Vp-p, ICPL0611 (Fig 15) I F = 0mA, V OH = 2V, R L = 350Ω, V CM = 400Vp-p, CM L ICPL0600 (Fig 14) I F = 7.5mA, V OL =0.8V, R L = 350Ω, V CM = 10Vp-p, ICPL0601 (Fig 14) I F = 7.5mA, V OL =0.8V, R L = 350Ω, V CM = 50Vp-p, ICPL0611 (Fig 14) I F = 7.5mA, V OL = 0.8V, R L = 350Ω, V CM = 400Vp-p, ICPL0611 (Fig 15) I F = 7.5mA, V OL = 0.8V, R L = 350Ω, V CM = 400Vp-p, V/μs V/μs * Typical values at 4 5/12/2012 DC93162

5 Fig 1 Forward Current vs Forward Voltage Fig 2 Input Threshold Current vs T A Fig 3 Low Level Output Current vs T A Fig 4 High Level Output Current vs T A Fig 5 Output Voltage vs Input Forward Current Fig 6 Low Level Output Voltage vs T A 5 5/12/2012 DC93162

6 Fig 7 Propagation Delay Time vs Forward Current Fig 8 Propagation Delay Time vs T A Fig 9 Enable Propagation Delay Time vs T A Fig 10 Pulse Width Distortion vs T A Fig 11 Rise Time / Fall Time vs T A 6 5/12/2012 DC93162

7 I F =7.5mA [ Input t PHL I F =3.75mA Output (Vo) t PLH 1.5V [ Output (Vo) 90% 10% Fig 12 t PHL, t PLH, t r and t f Test Circuit t f t r 3.0V Input t EHL 1.5V Output (Vo) t ELH 1.5V Fig 13 t EHL and t ELH Test Circuit 7 5/12/2012 DC93162

Peak V CM 0V 5V V O Switching Pos. A, I F=0mA V O(Min) V O(Max) CM H V O 0.5V Switching Pos. B, I F=7.

Common mode transient immunity in logic high level is the maximum tolerable (positive) dv CM /dt on the leading edge

Common mode transient immunity in logic low level is the maximum tolerable (negative) dv CM /dt on the trailing edge

8 Peak V CM 0V 5V V O Switching Pos. A, I F=0mA V O(Min) V O(Max) CM H V O 0.5V Switching Pos. B, I F=7.5mA CM L Fig 14 Common Mode Transient Immunity Test Circuit Fig 15 High Common Mode Transient Immunity Test Circuit Common mode transient immunity in logic high level is the maximum tolerable (positive) dv CM /dt on the leading edge of the common mode pulse signal V CM, to assure that the output will remain in a logic high state (i.e., V O > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dv CM /dt on the trailing edge of the common mode pulse signal, V CM, to assure that the output will remain in a logic low state (i.e., V O < 0.8V). 8 5/12/2012 DC93162

9 Notes: - The V CC supply must be bypassed by a 0.1μF capacitor or larger with good high frequency characteristic and should be connected as close as possible to the package V CC and GND pins. - Enable Input No pull up resistor required as the device has an internal pull up resistor. - t PLH is measured from the 3.75mA level on the HIGH to LOW transition of the input current pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse. - t PHL is measured from the 3.75mA level on the LOW to HIGH transition of the input current pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse. - t r Rise time is measured from the 10% to the 90% levels on the LOW to HIGH transition of the output pulse. - t f Fall time is measured from the 90% to the 10% levels on the HIGH to LOW transition of the output pulse. - t ELH is measured from the 1.5V level on the HIGH to LOW transition of the input Enable voltage pulse to the 1.5V level on the LOW to HIGH transition of the output voltage pulse. - t EHL is measured from the 1.5V level on the LOW to HIGH transition of the input Enable voltage pulse to the 1.5V level on the HIGH to LOW transition of the output voltage pulse. - CM H The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the HIGH state (i.e., V O > 2.0V). - CM L The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the LOW output state (i.e., V O < 0.8V). 9 5/12/2012 DC93162

10 ORDER INFORMATION ICPL0600, ICPL0601, ICPL0611 After PN Description Packing quantity None Surface Mount Tube Packaging 100 pcs per tube T&R Surface Mount Tape & Reel 2000 pcs per reel 10 5/12/2012 DC93162

11 PACKAGE DIMENSIONS (mm) Recommended Solder Pad Layout (mm) 11 5/12/2012 DC93162

12 Device Marking (Example ICPL0600) ICPL 0600 IYWW ICPL0600 denotes Device Part Number Y denotes 1 digit Year code WW denotes 2 digit Week code I denotes Isocom REFLOW SOLDERING TEMPERATURE PROFILE 217 C 200 C 150 C 1-3 C/s Max 60s 120s TEMP ( C) 1-3 C/s Max 260 C (peak,10s Max) >255 C (30s Max) 60s 100 s TIME (s) 12 5/12/2012 DC93162

13 Tape and Reel Packaging Direction of feed from reel Dimension No. A0 A1 B0 D0 D1 E F Dimension (mm) 6.2± ± ± ± ± ± ±0.1 Dimension No. Po P1 P2 t W K0 K1 Dimension (mm) 4.0± ± ± ± / ± ± /12/2012 DC93162

ISOCOM ICPL2630 / ICPL2631 COMPONENTS DESCRIPTION FEATURES SOLUTE MAXI- MUM RATINGS APPLICATIONS ORDER INFORMATION

ISOCOM ICPL2630 / ICPL2631 COMPONENTS DESCRIPTION FEATURES SOLUTE MAXI- MUM RATINGS APPLICATIONS ORDER INFORMATION DESCRIPTION The ICPL2630 and ICPL2631 dual channel devices each consists of an infrared emitting diode, optically coupled to a high speed integrated photo detector logic gate with a strobable output. FEATURES