List of Contents. Trunking systems. Selection of surface finish. Equipotential bonding. Cable ladders. Cable trays/ luminaire rails.
|
|
- Horace Glenn
- 5 years ago
- Views:
Transcription
1 List of Contents Trunking systems Ductel Twist Trunking system for electricity, telecoms and data solutions. The trunking is made of aluminium and is available with 45 mm and 80 mm openings. Plastic trunking Additional trunking system with many common accessories as for our Ductel trunking in aluminium. A stable and affordable option with good assembly possibilities. Selection of surface finish Equipotential bonding Cable ladders Cable trays/ luminaire rails Wire mesh trays Assembly profiles Anchor rails Angle profiles MP-19" rack Potential connections Cable clamps Ceiling brackets/ concrete screws Service poles/posts Floor boxes Trunking systems E-no, weight, package 183
2 Trunking systems Wall trunking TB 1010/TB 1032 recessed 3 m The cable area can be divided into sections with an intermediate shelf and there are slots in the trunking for earthing clamp TBM 1 see page 189. The trunking cannot be installed with the cantilever arm.tb has installation dimensions: 100x65 mm. Model E-no Width/depth Surface finish Suitable cover (80 mm) TB x65 mm natural TB x65 mm white TB x65 mm white Wall trunking TB m The cable area can be divided into sections with an intermediate shelf and there are slots in the trunking for earthing clamp TBM 1 see page 189. This trunking cannot be installed with the cantilever arm. Model E-no Width/depth Surface finish Suitable cover (45 mm) TB x65 mm natural TB x65 mm white Wall trunking TB m The cable area can be divided into sections with an intermediate shelf and there are slots in the trunking for earthing clamp TBM 1 - see page 189. Model E-no Width/depth Surface finish Suitable cover (80 mm) TB x65 mm natural TB x65 mm white Wall trunking TB m The partition wall has a punched hole pattern of 50x21 mm c-c spacing 320 mm. There are slots in the trunking for earthing clamp TBM 1 - see page 189. Model E-no Width/depth Surface finish Suitable cover (45 mm) TB x65 mm natural TB x65 mm white Surface finish as per: White RAL 9010 Natural - natural anodised
3 Wall trunking TB m The cable area can be divided into sections with an intermediate shelf and there are slots in the trunking for earthing clamp TBM 1 see page 189. Trunking systems Model E-no Width/depth Surface finish Suitable cover (80 mm) TB x65 mm natural TB x65 mm white Wall trunking TB m The trunking can be mounted upside down on the cantilever arm. The partition wall has a punched hole pattern of 50x21 mm c-c spacing 320 mm. There are slots in the trunking for earthing clamp TBM 1 - see page 189. Model E-no Width/depth Surface finish Suitable cover (45 80 mm) TB x65 mm natural TB x65 mm white Wall trunking TB m Both compartments can be divided into several parts with TDH intermediate shelf and there are slots in the trunking for earthing clamp TBM 1 see page 189. The partition wall has a punched hole pattern of 50x21 mm c-c spacing 320 mm. Model E-no Width/depth Surface finish Suitable cover (80 mm) TB x65 mm natural TB x65 mm white Wall trunking TB m The partition walls have a punched hole pattern of 50x 21 mm c-c spacing 320 mm. There are slots in the trunking for earthing clamp TBM 1 - see page 189. Model E-no Width/depth Surface finish Suitable cover (45 80 mm) TB x65 mm natural TB x65 mm white Surface finish as per: White RAL 9010 Natural - natural anodised 185
4 Trunking systems Front TB 80 3 m The front is fitted via a simple snap-in action. Front section L = 50 mm ( ), used between mounting boxes. 6 pcs/pack. Model E-no Width/depth Surface finish TB x19 mm natural TB x19 mm white TB 80-1/ x19 mm natural TB 80-3/ x19 mm white Front TB 45 3 m The front is fitted via a simple snap-in action. Model E-no Width/depth Surface finish TB x19 mm natural TB x19 mm white Corner TBC The corner acts as both inner and outer corners and also permits a few degrees of deviation from a 90 angle. Model E-no W x D x L mm Colour/mtrl. Suitable for TBC x90x103 natural alu/plastic TB 1010, 1040 TBC x90x103 white alu/plastic TB 1010, 1040 TBC x90x138 natural alu/plastic TB 1310, 1340 TBC x90x138 white alu/plastic TB 1310, 1340 TBC x90x173 natural alu/plastic TB 1710, 1740 TBC x90x173 white alu/plastic TB 1710, 1740 TBC x90x223 natural alu/plastic TB 2210, 2240 TBC x90x223 white alu/plastic TB 2210, Surface finish as per: White RAL 9010 Natural - natural anodised
5 Wall collar TBO Wall collar of white plastic (ABS). Covers the entry hole for connection against the wall. Trunking systems Model E-no W x L x D mm Material Suitable for TBO x106x25 ABS white TB 1010, 1040 TBO x106x25 ABS white TB 1310, 1340 TBO x106x25 ABS white TB 1710, 1740 TBO x106x25 ABS white TB 2210, 2240 Jointing collar TBL Plastic jointing collar (ABS), for connections between downward trunking and wall trunking. Model E-no W x L x D mm Material Suitable for TBL x67x12 ABS grey TB 1010, 1040 TBL x67x12 ABS white TB 1010, 1040 TBL x67x12 ABS grey TB 1310, 1340 TBL x67x12 ABS white TB 1310, 1340 TBL x67x12 ABS grey TB 1710, 1740 TBL x67x12 ABS white TB 1710, 1740 TBL x67x12 ABS grey TB 2210, 2240 TBL x67x12 ABS white TB 2210, 2240 End plate TBP End plate for stylish trunking capping. Easy installation with snap-on coupling that provides firm locking. Model E-no W x L x D mm Surface finish Suitable for TBP x65x24 natural TB 1010, 1040 TBP x65x24 white TB 1010, 1040 TBP x65x24 natural TB 1310, 1340 TBP x65x24 white TB 1310, 1340 TBP x65x24 natural TB 1710, 1740 TBP x65x24 white TB 1710, 1740 TBP x65x24 natural TB 2210, 2240 TBP x65x24 white TB 2210,
6 Trunking systems Splice TBJ Splice piece for a natural joint between trunking. Use two splices per joint. Meets requirements for equipotential bonding according Model E-no W xlxd mm Material SS-EN 61537:2007. TBJ x12x70 aluminium Cover joint TBMP Available in four models and can be used to cover joints between trunking. Fitted using double sided adhesive tape (enclosed). Model E-no Surface finish Suitable for TBMP natural TB-1010, 1040 TBMP white TB-1010, 1040 TBMP natural TB-1310, 2210, 2240 TBMP white TB-1310, 2210, 2240 TBMP natur TB-1340, 1740 TBMP white TB-1340, 1740 TBMP natural TB-1710 TBMP white TB-1710 Décor splice TBMP Fitted over joints as well as a wall collar for ends against the wall. Model E-no Surface finish Suitable for TBMP grey TB-1010, 1040 (100 mm) TBMP white TB-1010, 1040 (100 mm) TBMP grey TB-1310, 1340 (135 mm) TBMP white TB-1310, 1340 (135 mm) TBMP grey TB-1710, 1740 (170 mm) TBMP white TB-1710, 1740 (170 mm) TBMP grey TB-2210, 2240 (220 mm) TBMP white TB-2210, 2240 (220 mm) Adjusting piece TBE Used together with cantilever arm, for adjustment 0-24 mm. TBE aluminium 188
7 Cantilever arm TBE Aluminium cantilever arm for mounting on the wall with snap-in function. The distance from the centre of the top hole to the top edge of the trunking is 50 mm. Recommended spacing between cantilever arm is 1 m. Available in two models and used to divide the trunking into sections. The earthing clamp is used to earth the front and trunking. A maximum of 2x4 mm² Cu conductors can be connected to the clamp. Used to secure and strain relieve cables (max. 5 mm cable ties). Can also be used for mini trunking: TBA 10 and TBA 18. Trunking systems Model E-no Distance fr. wall No. of grilles TBE mm 1 TBE mm 2 TBE mm 3 TBE mm 4 TBE mm 5 Intermediate shelf TDH 1 m TDH 1 Model E-no Width/depth Material TDH x15 mm aluminium TDH x42 mm aluminium Earthing clamp TBM Cable tie bracket TBK Sound absorber XTBO TDH 2 TBM steel TBK ABS-white Sound absorber at wall penetrations by the trunking. Self-adhesive pieces which are attached to the inside of the fronts. XTBO 304 for front TB 45. XTBO 308 for front TB 80. Model E-no W x L x D mm XTBO x300x30 XTBO x300x30 189
8 Trunking systems Mounting box XTBF Model E-no W x L x D mm Material XTBF x95x50 ABS-grey Ventilation grille TBE 3 m Model E-no Width/depth Surface finish TBE x9 mm natural TBE x9 mm white Model E-no Length/width Material TBJ x3 mm steel Suitable for ABB CUED socket outlets. The mounting box is secured in the trunking with the supplied accessories (excluding strain relief). Universal box TBF Model E-no W x L x D mm Material TBF x42,5x79 ABS-blue TBF x42,5x150 ABS-blue Universal boxes snap into the trunking's front opening. 2 strain relief TBF 11 supplied. Clipped into the ventilation grille holder TBE 3. The edge of the grille aligns with the upper edge of the trunking. Number of grilles/cantilev. arm Ventilation grille holder Konsol Grille TBE TBE TBE TBE TBE The holder slides into the cantilever arm from the side. Use of the holder Cantilev. arm Konsol pcs/cantilev. arm TBE /3 TBE /3 TBE Model E-no Width/depth Material TBE /3 TBE x40 mm ABS-white TBE /3 Connecting pin for grilles Used for splicing ventilation grille TBE 20, mini trunking TBA 302, 652 and mini trunking TBA 10 and TBA
9 Adjusting plate TBF Used together with universal box TBF 1 and TBF 2. (Fastening screws included, unassembled). Trunking systems Strain relief for universal box TBF 1 and TBF 2 and mounting box. Model E-no WxLxD mm Material TBF x5x70 aluminium Strain relief TBF Model E-no TBF Mini trunking Used for cable routing and are made of aluminium. Surface finish: Natural anodized or powder coated white. Box 3, Vetlanda, Sweden tel , fax
10 Trunking systems mini trunking TBA 202 trunking and front 3 m Trunking dimensions: 32 x 20.5 x 3000 mm. Front dimensions: 32 x 6 x 3000 mm. End plate: 32 x 20.5 mm. Model E-no Surface finish Trunking TBA natural Trunking TBA white Front TBA natural Front TBA white Endplate TBD 20-3 white TBA 302 trunking, front and end piece 3 m Trunking dimensions: 65 x 30 x 3000 mm. Front dimensions: 54 x 7.5 x 3000 mm. End plate: 65 x 30 mm. Model E-no Surface finish Trunking TBA natural Trunking TBA white Front TBA natural Front TBA white End plate TBD natural End plate TBD white TBA 652 trunking, front and end piece 3 m Trunking dimensions: 65 x 65 x 3000 mm. Front dimensions: 54 x 7.5 x 3000 mm. End plate: 65 x 65 mm. Model E-no Surface finish Kanal TBA natural Kanal TBA white Front TBA natural Front TBA white Ändst. TBD natural Ändst. TBD white 192
11 Trunking systems mini trunking TBA 10 trunking, front and end piece 3 m Trunking dimensions: 100 x 49 x 3000 mm. Front dimensions: 80 x 19 x 3000 mm. End plate: 100 x 49 mm. Model E-no Surface finish Trunking TBA natural Trunking TBA white Front TB natural Front TB white End plate TBD natural End plate TBD white TBA 18 trunking, front and end piece 3 m Trunking dimensions: 184 x 49 x 3000 mm. Front dimensions: 80 x 19 x 3000 mm. End plate: 184 x 49 mm. Model E-no Surface finish Trunking TBA natural Trunking TBA white finish Front TB natural Front TB white finish End plate TBD natural End plate TBD white finish 193
12 Trunking system mini trunking ProDuct components! - see pages Switched wall socket outlet - fits Ductel trunking system with 80 mm front. All socket outlets have label holders. Box 3, Vetlanda, Sweden tel , fax
13 Trunking system mini trunking Plastic trunking system! The product range is extended with a cost-effective complete trunking system, which also fits with the other MP trunking. The trunking are stable, has an attractive finish and is easy to install. The accessories are designed for most installation possibilities and our technical support is a natural guide for a reliable installation. PK PK MK 60-3 MK Box 3, Vetlanda, Sweden tel , fax
14 Trunking system plastic Trunking with front PK m Trunking dimensions: 100x65x3000 mm. Front opening: 80 mm. Can be divided into sections with PEKE 60 see page 200. Cannot be installed with the cantilever arm. Trunking PK PVC white Trunking with front m Trunking PK PVC white Décor splice Trunking dimensions: 135x65x3000 mm. Front opening: 80 mm. Can be divided into sections with PEKE 60 see page 200. Can be installed with Cantilever arm see page 200. Fitted over joints as well as a wall collar for ends against the wall. Suitable for PDC ABS white PK PDC ABS white PK End plate End plate for stylish trunking capping. Overlaps the end of the trunking/cover. Suitable for PKE ABS white PK PKE ABS white PK PKJ ABS white Splice Splice for a natural joint between trunking sections. Use two splices per joint. 196 Surface finish as per: White RAL 9003
15 Trunking system plastic Corner TBC The corner acts as both inner and outer corners and also permits a few degrees of deviation from a 90 angle. Model E-no W x D x L mm Colour/material Suitable for TBC x90x103 white finish alu/plastic PK TBC x90x138 white finish alu/plastic PK Wall collar TBO Wall collar of white plastic. Covers the entry hole for connection against the wall. Model E-no W x L x D mm Material Suitable for TBO x106x25 ABS-white PK TBO x106x25 ABS-white PK Jointing collar for connections between downward trunking and wall trunking. Jointing collar TBL Model E-no B x L x D mm Material Suitable for TBL x67x12 ABS white PK TBL x67x12 ABS white PK Used together with cantilever arms, for adjustment 0-24 mm. Adjusting piece TBE TBE aluminium 197
16 Trunking system plastic Cantilever arm TBE Aluminium cantilever arm for mounting on the wall with snap-in function. The distance from the centre of the top hole to the top edge of the trunking is 50 mm. Recommended spacing between cantilever arm is 1 m. Model E-no Distance fr. wall No. of grilles TBE mm 1 TBE mm 2 TBE mm 3 TBE mm 4 TBE mm 5 Ventilation grille TBE 3 m Clipped into the ventilation grille holder TBE 3. The edge of the grille aligns with the upper edge of the trunking. Model E-no Width/depth Surface finish TBE x9 mm white finish No. of grilles/cantilever arm Cantilever arm Grilles TBE TBE TBE TBE TBE Ventilation grille holder Model E-no Width/depth Material TBE x40 mm ABS-plastic The holder slides into the cantilever arm from the side. Connecting pin for grilles Use of the holder Cantilever arm pcs/cantilever arm TBE /3 TBE /3 TBE TBE /3 TBE /3 Used for splicing ventilation grille TBE 20, mini trunking TBA 302, 652 and mini trunking TBA 10 and TBA 18. Model E-no Length/width Material TBJ x3 mm steel 198
17 Mini trunking with front MK 60 2 m Trunking dimensions: 60x60x2000 mm. Can be divided into sections with PEKE 60 see page 200. Mini trunking plastic Trunking MK PVC-white Mini trunking with front MK m Trunking dimensions: 100x60x2000 mm. Can be divided into sections with PEKE 60 see page 200. Trunking MK PVC white Flat elbow Junction to angle the mini trunking. End plate EKE 60 BC PVC white EKE 100 BC PVC white End plate to close the mini trunking. EKE 60 EC PVC white EKE 100 EC PVC white Surface finish as per: White RAL
18 Mini trunking plastic Inner corner Inner corner for angling the mini trunking. EKE 60 IC PVC-white EKE 100 IC PVC-white Outer corner Outer corner for angling the mini trunking. EKE 60 OC PVC-white EKE 100 OC PVC-white REKE PVC-white REKE PVC-white Cable clamps Holds the cables in position and can also remain in place when the front is fitted. 9 pcs/pack. Partition 1 m Partition to create compartments of PK and MK-trunking. PEKE PVC-white Cable tie holder Cable tie holder to secure and strain relieve cables. PSK PVC-white 60 pcs/pack. 200 Surface finish as per: White RAL 9003
19 AMP and Keystone. Suitable trunking with 45-mm opening. Fits trunking with 45- and 80-mm openings. ProDuct tele/data Trunking system Cover for data socket outlet 1xRJ45 Model E-no W x D mm Pack. Colour D45K x50 10/200 white D45K x50 10/200 grey Cover for data socket outlet 2xRJ45 Model E-no W x D mm Pack. Type Colour D45K x50 10/100 Keystone white D45K x50 10/100 Keystone grey D45S x50 10/100 Systimax white D45S x50 10/100 Systimax grey D45L x50 10/100 Actassi white D45L x50 10/100 Actassi grey Fastening frame for modular socket outlets with label holder Used with adapter plates for AMP, Keystone, Systimax and Actassi data jacks. Intended for 2xRJ45 (possibility for 3xRJ45). AUD50.NP Fastening frame RJ45 modular outlet, white 10/100 AUD50.NP Fastening frame RJ45 modular outlet, alu. 10/100 Blind plug for AUD50.NP. 10 pcs/pack. Blind plug Adapter plate for fastening frame AUDMP plastic Adapter plate for 3xAMP, Keystone, Systimax or Actassi data jacks. Supplemented with fastening frames AUD50.NP or AUD50.NP-83. Media adapters see page 169. AUD Adapter plate for 3xRJ-45, AMP 10/100 AUD Adapter plate for 3xRJ-45, Keystone 10/100 AUD Adapter plate for 3xRJ-45, Systimax 10/100 AUD Adapter plate for 3xRJ-45, Actassi 10/
20 Trunking system ProDuct components 2-way socket outlet with box The socket outlet is approved for through wiring. If several AUD10 sockets are connected in series, 120 mm long intermediate cables (stripped 13 mm) are recommended. One connection package AUD30 or AUD31 is required for each socket outlet group. Box depth is 45 mm. AUD Socket outlet earthed, 2-way, white 10/100 AUD10-214D Socket outlet earthed, 2-way, white 10/100 AUD Socket outlet earthed, 2-way, alu. 10/100 AUD10-83D Socket outlet earthed, 2-way, DATAlabelled. alu. 10/100 Jussi mounting box All single module components in the Jussi range (switches, controllers, one-way socket outlets and telecom products) can be fitted in the box. The junction box is supplied with a cover frame. One connection package AUD30 or end package AUD31 is required for each box. Box depth is 45 mm. AUD Junction box for Jussi products, white 10/100 Impressivo mounting box All single module components in the Impressivo range (switches, controllers, one-way socket outlets and telecom products) can be fitted in the box. The junction box is supplied with a cover frame. One connection package AUD30 or end package AUD31 is required for each box. Box depth is 45 mm. AUD Junction box Impressivo apparatus white 10/100 AUD AUD21 Junction box Impressivo products, alu. 10/100 Connection package The package contains one end package, a junction box and one cover. Approved for 3-phase through wiring. A maximum of 5 loose connections can be used (max. 5x2.5) in the junction box. AUD Connection package with the junction box, white 10/100 AUD Connection package with the junction box, alu. 10/
21 ProDuct components Trunking system End package The package includes two end pieces and two covers. Used together with 2-way socket outlet AUD10 - Jussi or Impressivo boxes. AUD End package without junction box, white 10/100 AUD End package without junction box, alu. 10/100 Universal box TBF Universal boxes snap into the trunking's front opening. 2 strain relief TBF 11 supplied. Model E-no W x L x D mm Material TBF x42,5x79 ABS-blue TBF x42,5x150 ABS-blue Plastic trunking system! An excellent option - made of white PVC. 203
22 Trunking system ProDuct Pre-wired socket outlet Pre-wired 2-way socket outlet Installation-ready 2-way socket outlet with label holder 14x46 mm, end piece, cover, junction box with strain relief and 3 top clips. Approved for 3-phase through wiring. AUD Socket outlet set, earthed, 2-way, white 1/25 AUD11-214D Socket outlet set, earthed, 2-way, DATA-labelled, white 1/25 AUD Socket outlet set, earthed, 2-way, alu. 1/25 AUD11-83D Socket outlet set, earthed, 2-way, DATA-labelled, alu. 1/25 Pre-wired 4-way socket outlet Installation-ready 4-way socket outlet with label holder 14x46 mm, end piece, cover, junction box with strain relief and 3 top clips. Approved for 3-phase through wiring. AUD Socket outlet set, earthed, 4-way, white 1/20 AUD12-214D Socket outlet set, earthed, 4-way, DATA-labelled, white 1/20 AUD Socket outlet set, earthed, 4-way, alu. 1/20 AUD12-83D Socket outlet set, earthed, 4-way, DATA-labelled, alu. 1/20 Pre-wired 6-way socket outlet Installation-ready 6-way socket outlet with label holder 14x46 mm, end piece, cover, junction box with strain relief and 3 top clips. Approved for 3-phase through wiring. AUD Socket outlet set, earthed, 6-way, white 1/25 AUD13-214D Socket outlet set, earthed, 6-way, DATA-labelled, white 1/25 AUD Socket outlet set, earthed, 6-way, alu. 1/25 AUD13-83D Socket outlet set, earthed, 6-way, DATA-labelled, alu. 1/25 Pre-wired 8-way socket outlet Installation-ready 8-way socket outlet with label holder 14x46 mm, end piece, cover, junction box with strain relief and 3 top clips. Approved for 3-phase through wiring. AUD Socket outlet set, earthed, 8-way, white 1/25 AUD Socket outlet set, earthed, 8-way, alu. 1/ Surface finish as per: White RAL 9010 Alu RAL 9006 Grey RAL 7011
23 ProDuct Pre-wired socket outlet Trunking system (Order item, not stocked.) Residual current device AUD Residual current device, 30 ma, A-type, 2-pole - white 1/25 Surface finish as per: White RAL 9010 Alu RAL 9006 Grey RAL
Cable Management Solutions with DLP TM
DLP trunking system P. 374-375 Selection chart for DLP trunking system P. 397 Floor boxes & Under floor boxes Technical data P. 373 DLP U-PVC adaptable trunking system Cable Management Solutions with DLP
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More informationOptiLine 45. The 45 direct Click-in installation system
OptiLine 45 The 45 direct Click-in installation system P91432 Electrical, telephone and data installations must be easy to install, safe to use and flexible enough to ensure that changes are easy to make.
More informationConnectionSolutions 4Workplaces. general catalogue
ConnectionSolutions 4Workplaces general catalogue 2011-2012 Simon TRUNKING 06 FOR DIRECT SNAP-FIT K45 MECHANISMS C Specifications: Material: PVC and anodisedaluminium trunking. White and paintedaluminium
More informationTrunkingxxxxxx. aluminium colour U23X. Industrial Catalogue
in U23X 93 Trunkingxxxxxx aluminium colour Industrial Catalogue 127 Trunking 93 IN U23X aluminium colour Trunking 93 in U23X aluminium colour Designed to fit in the most demanding architectural and decorative
More informationOptiLine 70 Trunking Product Overview Catalogue. Simple, modular, flexible.
Product Overview Catalogue Simple, modular, flexible. Overview Established in 1920, Clipsal by Schneider Electric is Australia s number one brand of electrical products, accessories and solutions for the
More informationTrunkingxxxxxx. in aluminium. Industrial Catalogue
93 Trunkingxxxxxx in aluminium Industrial Catalogue 151 TRUNKING 93 IN LUMINIUM Trunking 93 in aluminium To mount switches and sockets in environments requiring neat finishing Free choice of switches and
More informationUltra-efficient installation solutions
Installation System -efficient installation solutions Cable Management System Efficient use of time and money is good for you, and good for your customers. 5x installation system is a simple and smart
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationNOTE: Top section pole (Q) is packed INSIDE bottom section pole (S)
Form 0905-0 Instructions and Parts List TM- Mini Castle (modified) MARTIN SAFETY SYSTEM NOTES: () A complete system is packed in two boxes post box and house box. House box contains hardware for both post
More informationConnectionSolutions 4Workplaces. general catalogue
ConnectionSolutions 4Workplaces general catalogue 2011-2012 Simon TRUNKING 05 PVC AND ALUMINIUM TRUNKING FOR DIRECT SNAP-FIT K45 MECHANISMS C Specifications: Material: Trunking with thermoplastic base.
More informationDLP mini trunking. DLP U-PVC trunking system mini-trunking system. DLP U-PVC trunking system and accessories 80 x 50. Comfortable implementation
DLP mini trunking Cable-grip It makes the installation easier and faster by containing all the wires inside the trunking body before the cover is clipped Comfortable implementation During installation,
More informationMODUL-iT ABS modules 60x40
MODUL-iT ABS modules 60x40 MODUL-iT ISO modules and accessories make things talk to each other The modules are the heart of the MODUL-iT system. All modules have 60x40 cm outer dimensions. They are interchangeable
More information150mm to 200mm. With box in comp 2 2 = 1535mm² total area 2 = 691mm² 45% space factor. C. & C. Marshall Ltd.
Technical information Aluminium trunking systems 295 Aluminium trunking capacity guide Trunking sizes up to 150mm Trunking sizes from 150mm to 200mm Trunking sizes over 200mm 105 1 2 105 3 Bench trunking
More informationDLP-S Trunking LIMOGES Cedex. Phone : Fax :
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 SOMMAIRE PAGES 1.Trunking 1 to 2 2.Accessories 3 to 7 3.Technical chacteristiques 8 4.Material chacteristiques 8 1. TRUNKING. DLP-S trunking
More informationParts list continues on Page 2 HOUSE PARTS PACKED IN HOUSE BOX PARTS IN SMALL PLASTIC BAG (HARDWARE) POST PARTS PACKED IN THIS BOX (LARGE PLASTIC BAG)
Form 05-07 Instructions and Parts List MSS- Martin Safety System NOTES: () A complete system is packed in two boxes post box and house box. House box contains hardware for both post and house assembly.
More informationGENERAL CATALOGUE. Connectivity for workplaces
GENERAL CATALOGUE Connectivity for workplaces CONTENTS GENERAL 2 General Catalogue Connectivity for workplaces WORKPLACE SOLUTIONS SIMON 500 CIMA SIMON K45 SIMON TRUNKING p. 4 p. 86 p. 150 SIMON ELECTRICAL
More informationSimply versatile: Rapid 80 device installation trunking
Simply versatile: Rapid 80 device installation trunking Space for your installation 2 OBO In many offices, device installation trunking forms the backbone of electrical installations. When mounted at a
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationPinnacle Technical. Bench and Shelf Trunking. cable management perimeter and distribution. Features.
604 Pinnacle Technical cable management perimeter and distribution www.mkelectric.co.uk Bench and Shelf Trunking Features l Available in a single or double configuration l May be fitted either direct to
More informationWanco Electric & Machinery Pte Ltd. Cable Management Systems. Cable Trunking
Wanco Electric & Machinery Pte Ltd Cable Management Systems Cable Trunking About Wanco Wanco Electric and Machinery Pte Ltd is the leader in electrical construction materials. Through continued support
More informationRaised Floor system LIMOGES Cedex. Phone : Fax :
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 Raised Floor system CONTENTS PAGES 1.Range 1 to 3 2.Installation process 4 to 10 3.Products détails 11 to 22 4.Technical characteristics
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationHeavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.
Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy
More information5/2 Introduction. Unequipped Distribution Boards 5/4 Modular distribution boards 5/5 Add-on parts
ALPHA AS Modular Distribution Boards /2 Introduction Unequipped Distribution Boards /4 Modular distribution boards / Add-on parts Assembly Kits for Unequipped Distribution Boards /6 8GK4 assembly kits
More informationCablelink Plus Flush Technical
Cablelink Plus Flush Technical 107 technical hotline +44 (0)1268 563720 screeded floor systems is designed to provide power and data distribution highways in screeded floors. The robust system offers a
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationShelving for picking STORAGE TECHNOLOGIES & MATERIAL HANDLING
M7 Shelving for picking General features - Storage system for manual picking of products following the man-to-goods principle - Possibility of storing medium to heavy loads - Easy assembly - Gauging between
More informationGeneral catalogue Export SMOUTS ARCHITECTEN
General catalogue 2011-2012 Export SMOUTS ARCHITECTEN 08 TRUNKING SYSTEMS Trunking systems For a neat, professional finish Integrating the cabling in an interior design without drilling or channeling work?
More informationMEASURE POSTS AND MARKER POSTS
MEASURE POSTS AND MARKER POSTS 1.4.3.1 Aluminium posts Measurering posts and marker posts for cathodic corrosion protection combine the latest application technology with optimal material properties. The
More informationMerchandising Solutions Turn O Matic
Merchandising Solutions Turn O Matic CATALOGUE ABOUT METO EXCELLENT MERCHANDISE IDENTIFICATION AND LABELING METO CHECKPOINT S HIGH-POWERED BRAND Checkpoint offers the global retail, service and industrial
More informationFABA. Installation Instructions. Conductor Bar System. Publication #FABA-03 3/1/04 Part Number: Copyright 2004 Electromotive Systems
FABA Conductor Bar System Installation Instructions Publication #FABA-03 3/1/04 Part Number: 005-1062 Copyright 2004 Electromotive Systems 1S 100 Z Installation Instructions Contents: Basic Diagram - -
More informationMANUAL e130. Wallstation
MANUAL 07.29.13 e130 Wallstation The Enovate Medical e130 Wallstation was designed to set a new standard in quality. Enovate Medical s goal is to provide a wallstation that is ready for years of use,
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationAssembly and Installation Guide
The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"
More informationArt and Picture Hanging Rail Systems SYSTEMS. Display with Elegance
Art and Picture Hanging Rail Systems SYSTEMS Display with Elegance Table of Contents Classic Rail +..... 1 Click Rail...... 4 Top Rail...... 8 Info Rail...... 10 Deco Rail...... 12 Wires and Hooks...................
More informationIMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the
PART # 1608990 STATIC BRIDGE & RETURN MODULE 1. This sheet covers the steps to install a static bridge or return module with the FX no hinged access panel back option to a height adjustable freestanding
More informationJunction boxes. Surface mounting - IP44 - IP55 - IP56 TECHNICAL CHARACTERISTICS
Junction boxes Surface mounting - IP44 - - IP56 TECHNICAL CHARACTERISTICS Technical specifications 3 models with cable outlets and snap fixed cover (IP44 according to Standards EN 60529) 7 models with
More information4/2 Introduction. Marshaling Boxes 4/8 8GK1 surface-mounting distribution boards
ALPHA 630 - DIN Floor- Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards /5 8GK1 surface-mounting distribution boards, IP3 /6 8GK1 surface-mounting distribution boards, IP55 Marshaling
More informationBunk Pod Front Entry Assembly Instructions
Bunk Pod Front Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod This step by step guide will show how to assemble your pod(s) on site. It
More informationAccessories and workbenches
Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials
More information3. Barrier elements. Barrier posts. Stainles steel
3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240
More informationSimplex Baseboard System Baseboard System
Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products
More informationInstallation Instructions
Installation Instructions Optima LED 8 Double-Sided StretchLite Perimeter Lit Graphic Display Line Voltage Connector Optima LED DS5 (Double-sided StretchLite Graphic Display) with Graphics Corner Bracket
More informationEmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY
EmagiKit Privacy Pod Plus Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY DIMENSIONS AND COMPONENTS 47 47 Ceiling Unit 2-B 2-L 2-R Glass Door Corner Trim Door Handle 90 Adjustable Height Work Surface 1-B
More informationDLPlus. Dado and Skirting trunking LIMOGES Cedex. Phone : Fax :
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 DLPlus CONTENTS PAGES 33744 33664 33745 33670 1.Range 80/120x20 1 to 2 2.Accessories 80/120x20 2 to 3 3.Range 140x35 4 4.Accessories 140x35
More informationGota cassette. Version 1.10 Sun Protection AVZ 3G.1
Version 1.10 Sun Protection AVZ G.1 G.2 Sun Protection AVZ Version 1.10 Part number Description Paint finish Length in m 1 4211 772-090 Alu wall bracket 140 mm Mill finish 4211 772-008 Idem RAL 705 light
More informationSPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l
SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l T h e a l l p u r p o s e c o n s t r u c t i o n k i t SPEEDFRAME All materials are kept close to hand in this specially designed Speedframe
More informationPowerlink Plus Technical
CABLE MANAGEMENT mkelectric.co.uk TECHNICAL SPECIFICATION ELECTRICAL VOLTAGE RATING 63A, 250V a.c. VOLTAGE DROP L to N = 3.47 mv/a/metre run L to E = 3.47 mv/a/metre run N to E = 3.47 mv/a/metre run EARTH
More informationOXYGEN INSTALLATION. Revision date
12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex
More informationSeriesTWO RGB Fluorescent Fixtures. Installation and Instruction Manual
SeriesTWO RGB Fluorescent Fixtures Installation and Instruction Manual Brightline LP 580 Mayer Street #7, Bridgeville PA 15017 Phone 1-412-206-0106 Fax 1-412-206-0146 www.brightlines.com The Brightline
More informationSPEEDFRAME. The speedy way to be individual. The all purpose construction
SPEEDFRAME The speedy way to be individual The all purpose construction kit SPEEDFRAME All materials are kept close to hand in this specially designed Speedframe work station. Pinning Punch, use with 25mm
More informationWilsonstak. library bookstacks general specifications. Wilsonstak
Wilsonstak library bookstacks general specifications Wilsonstak Scope This specification covers delivery and installation of Steel Bookstack Shelving of the bracket type only. Unit heights, depths and
More informationInstallation instructions, accessories. TV receiver, digital
Installation instructions, accessories Instruction No 30756561 Version 1.1 5 Part. No. 30756181, 30756569 TV receiver, digital Volvo Car Corporation TV receiver, digital- 30756561 - V1.1 Page 1 / 36 Equipment
More informationEquilibrium. Conference Table. Installation Instruction. Revision B 11/07/16
Equilibrium Conference Table Installation Instruction Revision B 11/07/16 Equilibrium End User Agreement Enwork Equilibrium table bases must be installed directly onto a four inch minimum thickness concrete
More informationcompile system INSTALLATION GUIDE Updated January 2019
INSTALLATION GUIDE Updated January 09 compile system Table of Contents Panels 0 Quick Connect Clips 0 Lock Clips 0 Panel Trims 0 Privacy Glass 0 Post Base Covers 04 Electrical 04 Power Distribution Harness
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationRisk Assessment & Safe Working Practice
RA Ref Number: 36 Revision: 3 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: Installing Trunking Next Review Date: 01/04/2019 Notes: Please refer to Safe Working
More informationPOP PLUS / SPIDER SET-UP INSTRUCTIONS
POP PLUS / SPIDER SET-UP INSTRUCTIONS 1 Place system frame on floor with screws indicating top. Expand upwards & outwards and secure frame connectors. Pop-Up display systems are made to be set-up and taken
More information1.2 Overview. Self-adhesive mounting bases and clamps for screw and rivet mounting. Typical applications
1.2 Overview Self-adhesive mounting bases and clamps for screw and rivet mounting The main difference between a mounting base and a cable clamp is the way the cable bundle can be mounted: while the cable
More informationFooter & Base Plate Assembly. installation guide. ILINE power/data beam
Phase Footer & Base Plate Assembly installation guide ILINE power/data beam Phase Materials and Tools. ILINE Postsleeve Components Top Cap Data Face Plate Post Sleeve Post Sleeves shipped with orders after
More information+ - 1a. 1b. c. 1d. 1e. Runway Suspended / Surface Cont. Run Installation. 2.0mm DIL DIL Revision - M 23/11/2018 Page 1
230-240V / 50-60Hz IP20 IK00 + - 2.0mm WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 : specification for general requirements and
More informationGE Monogram. Installation. Instructions. 36" Vent Hood. Model ZV750. Call anywhere in the US and Canada -
at :: rangehoods. com GE Monogram Instructions Model ZV750 GE Monogram at:: rangehoods. com is a division of CAUTION WARNING Before you begin Read these instructions completely and carefully. IMPORTANT:
More informationInteractive Monitor Arm
Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods
More informationCustomer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes.
Solutions for Customer Premise Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes. The product range of distribution boxes offers small distribution
More informationInstructions and Parts List MSS-12W MARTIN SAFETY SYSTEM
HOUSE PARTS PACKED IN HOUSE BOX Code # Item Qty Description 950 9776 77 85036 500 868 635 9635 5075 860 3578 8507 60 6 95065 6 98000 7800 7806 3 5 6 7 7A 8 9 0 3 5 6 6A 6B 8 Instructions and Parts List
More informationStainless Steel Equipment Brochure
Shawn Wee Equipment Specialist M: 0447 491 411 E: shawn@medsales.com.au Stainless Steel Equipment Brochure Designed for Hospital & Healthcare Environments Shelving & Storage Brochure Beautifully designed
More informationMONEX40 EXTRUDED ALUMINIUM ASSEMBLY SYSTEM. MONK Conveyors Limited Unit 9 The Christy Estate Ivy Road Aldershot Hampshire GU12 4TX
MONEX EXTRUDED ALUMINIUM ASSEMBLY SYSTEM Conveyors Limited Unit 9 The Christy Estate Ivy Road Aldershot Hampshire GU12 4TX Tel:01252 369800 Fax:01252 369801 Email: sales@monk-conveyors.co.uk Made in England
More informationINSTRUCTION SHEET U19
U19 All Refrigerator and All Freezer Trim Kit Installation Product Line: U19 All Refrigerator and All Freezer Models Parts Included in Kit TRIMKITEZ1 (Part# 297333500): Single Trim Kit Components Single
More informationInstallation manual. For setting in concrete/on base plates - Panel height 1830
1 Aluminium fencing and drive-in gates Installation manual For setting in concrete/on base plates - Panel height 1830 Aluclos system components: U10 Connecting U-bracket 1900 mm CL18/CL18.XL Half-height
More informationAssembly Instructions
RoomScape Furniture System March 2013 - Bed Styles bed deck board bed deck board top cap top cap base glide middle side rail frame frame stacking device frame middle lower reinforcement side rail Single
More informationPATENTED NO WELD SYSTEM!
PATENTED NO WELD SYSTEM! Patented no weld aluminium batten system Various batten sizes snap onto simple fixing clip Fit to face of walls and ceilings or between pillars or posts Cut to size system with
More informationInstallation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
More informationSRS IT cabinets. Installation height numbering as a standard
Among the core products of BKT ELEKTRONIK are metal IT cabinets and casings and related metal accessories. Cabinets are intended for passive and active network equipment with standard dimensions of 10",
More information600G2 Internal Sliding Adapter Panel Shelf Instructions
Instruction Sheet 860391986 Issue 6, February 2013 SYSTIMAX Solutions 600G2 Internal Sliding Adapter Panel Shelf Instructions General The SYSTIMAX 600G2 adapter panel shelf is 19-inch wide x 1.75-inch
More informationIn a class of its own:
www.gsmotion.com In a class of its own: Easy To Design Easy To Install Take the safe route. The incredibly solid and wear resistant safety fence system guarantees the highest level of quality, longevity,
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationCOYOTE Terminal Closure (Single Chamber) Hermetically Sealed With Hardened Adapters
JUNE 2006 COYOTE Terminal Closure (Single Chamber) Hermetically Sealed With Hardened Adapters Be sure to read and completely understand this procedure before applying product. Be sure to select the proper
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationCOLIBRITM. Ceiling. Square ceiling diffuser with discs for supply air. Quick guide
COLIBRITM Ceiling Square ceiling diffuser with discs for supply air Quick facts Adjustable discs flexible spread pattern Can be used for vertical air diffusion Swirl function Also available in the exhaust
More informationL182 - Installation Sheet Modular Wine Rack ( Wall Mount )
Modular Wine Rack ( Wall Mount ) 1A 1B 2B 2A Cross Bar Options: 1A 2A 1B 2B Modular Wine Rack ( Wall Mount ) Parts Rail LED arm modules Wine bottle cross bars Rail cover Setscrew cover 1) Drill holes and
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationHeight Adjustable Benching End Panel and Utility Pole
Height Adjustable Benching End Panel and Utility Pole Tools required: END PANEL Jig Saw Power Drill END PANEL WITH UTILITY POLE Bit Holder Long #2 Square Drive Bit 5mm Hex Drive Bit UTILITY POLE Level
More information19 Wall Mounting FOR. Defence & Aerospace IT & Networking Education Government Hotels & Leisure Oil and Gas
LANDE 19 wall mounting provides an aesthetically pleasing, functional, decorative and economic solution for wall mount equipment installations. The wall mounted bracket can be used at in a wide range of
More informationChapter 19. Interior Finish Work
Chapter 19. Interior Finish Work 19.1 INSTALLING FLOOR TRIM 19.2 INSTALLING CLOSET SHELVES AND POLES 19.3 INSTALLING BATHROOM ACCESSORIES 19.4 HANGING MINI-BLINDS 19.5 INSTALLING APPLIANCES 19.6 INSTALLING
More informationaluline 1 These aluboard8 rails are black anodised, as per customer s request.
p. 8 aluline These aluboard8 rails are black anodised, as per customer s request. 2 The steel shelves are powder coated in black in order to match with the rails. 5 Of course, the mobile shop stands made
More informationDRIVIA cabinets LIMOGES Cedex France 1. DESCRIPTION, USE 3. DIMENSIONS 2. RANGE, CAT. NO. EQUIVALENCE TABLE
87045 LIMOGES Cedex France Tel: (+33) 05 55 06 87 87 Fax: (+33) 05 55 06 88 88 DRIVIA cabinets CONTENTS NTS PAGES 1. Description, use....1 2. Range, equivalence table...1 3. Dimensions...1 4. General characteristics...2
More informationInterior Equipment, Shop Fittings
Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting
More informationSnap-on Aluminium trunking. Number(s) : /13/17/19/22/24/28/30/34/36/40/42,
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 Snap-on Aluminium trunking. Number(s) : 6 038 11/13/17/19/22/24/28/30/34/36/40/42, CONTENTS PAGES 1.Range 1 to 2 2.Finishing accessories
More informationTrunking Guide. Colour List... W White M Magnolia B Black. shape & size (wxh) colours available
Trunking Guide Colour List... W White M Magnolia B Black A Aluminium O Oak Effect R Red P Premium Wood (stainable 22x22 only) F1 Light Oak Effect (22x22 only) illustrations not to scale shape & size (wxh)
More informationNX7 SERIES 5-1/2 HANDRAIL
STORAGE & HANDLING The handrails are shipped unassembled. Upon receipt, immediately check all material for any damage that may have occurred in transit and verify that all of the items and quantities are
More informationCNC Router Parts PRO Machine Kit Cable Track Installation Instructions
1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the
More informationWARNING: Prior to installation, turn the power off to the vending machine and unplug it from its power source. Also, make sure to level the machine.
Installation of Gum and Mint Tray for National 147, 157, 167 Important Note: Please read all instructions thoroughly before continuing with installation of kit. If you are having problems installing the
More informationNight Vent Handle. Window Furniture - for side & top hung casement windows WF2:010. Fixings
Night Vent Handle A traditional bulb end design Night Vent Handle with Wedge Plate featuring two vent positions for open-out, side and top hung, casement windows. A lockable version with removable key
More information2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards
Siemens AG 010 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quickassembly kits Unequipped
More informationSAVE THESE INSTALLATION INSTRUCTIONS
Light Without Boundaries LUMATO RESERVES THE RIGHT TO CHANGE PRODUCT 7500003 8/4 Light Without Boundaries LUMATO RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL INSTALLATION WARNING To Reduce Risk Of Death,
More informationAssembly Instructions
InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective
More information