Gota cassette. Version 1.10 Sun Protection AVZ 3G.1
|
|
- Brook Manning
- 5 years ago
- Views:
Transcription
1 Version 1.10 Sun Protection AVZ G.1
2 G.2 Sun Protection AVZ Version 1.10
3 Part number Description Paint finish Length in m Alu wall bracket 140 mm Mill finish Idem RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Alu end cap wall bracket, uni Mill finish Idem RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Plate screw countersunk Philips head 4.2 x 16 mm (For fixing end cap to the fixing plate ) Alu top cover support Gota, left Mill finish Idem RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Alu top cover support Gota, right Mill finish Idem RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Alternative top cover supports Linea are also suitable for the Gota: Apply in combination with a steel wall strip or by mounting o a ceiling Alu top cover support Gota/Linea, left Mill finish Idem RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Version 1.10 Sun Protection AVZ G.
4 Part number Description Paint finish Length in m Alu top cover support Gota/Linea, right Mill finish Idem RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Top cover supports /72- can be combined with: Steel wall strip 565 x 70 x 15 mm RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Fixing package for wall strip Use the wall bracket below in combination with top cover supports /72- : Alu wall bracket Gota/Linea Mill finish Idem RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Use the ceiling bracket below in combination with top cover supports /72- : Alu ceiling bracket Gota/Linea RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Alu mounting set Gota Mill finish Idem RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* G.4 Sun Protection AVZ Version 1.10
5 Part number Description Paint finish Length in m Arm connection pin centric Socket-head bolt M8 x 0 mm with Philips cylinder head (For fixing the mounting plate to the top cover support) Stainless steel washer M Bearing pin 12 mm with fixing plate Zinc-plated Steel motor support for ASA motor, with square spindle hole 10 mm Zinc-plated Stainless steel screw with countersunk Philips head M6 x 10 mm (For fixing the bearing pin and motor support to the mounting plate) Nylon bearing roller bung 78 incl. bearing with increased inner ring Grey Alu mono plug 78 with square spindle 1 x 70 mm Nylon packing ring with 15 mm hole, for square spindle 1 mm 10 Version 1.10 Sun Protection AVZ G.5
6 Part number Description Paint finish Length in m Gear box fixing plate Gota, Linea and Primo for and (refer to chapter 9A) Stainless steel tap bolt M 6 x 16 mm (for fixing the gear boxes and to the mounting plate) Nylon end cover front side mounting plate RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* For ceiling mounting with ceiling mount bracket use the above mentioned end covers. For ceiling mouting where the End fix brackets are turned to the ceiling, use the end covers below Nylon end covers front side ceiling mounting kit L+R RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (*= textured) RAL 7016 anthracite grey* Idem (*= textured) RAL 9005 jet black* Nylon end cover high without groove for top cover support and with recess RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Transparent decal Fits in the recess of the end cover 2 When using gear box/wall mounting: Nylon end cover high with groove, left RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream G.6 Sun Protection AVZ Version 1.10
7 Part number Description Paint finish Length in m Nylon end cover high with groove, right RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream When using gear box/ceiling mounting: Nylon end cover high without groove for ceiling mounting RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream For motor- or bearing side, both for wall and ceiling mounting: Nylon end cover high without groove RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Alu top cover Gota Mill finish Idem Mill finish Idem Mill finish Alu top cover Gota silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Alu top cover Gota RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Alu top cover Gota RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream 6.0 Version 1.10 Sun Protection AVZ G.7
8 Part number Description Paint finish Length in m Alu top cover Gota (* = textured) RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Alu top cover Gota (* = textured) RAL 9005 jet black* Idem RAL 9005 jet black* Idem RAL 9005 jet black* Alu top cover Gota (* = textured) Sepia brown* Idem Sepia brown* Idem Sepia brown* 6.0 Optional roller support profile for finishing cassette: Alu roller support profile Gota Mill finish Idem Mill finish Idem Mill finish Alu roller support profile Gota silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Alu roller support profile Gota RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Alu roller support profile Gota RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Alu roller support profile Gota (* = textured) RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* 6.0 G.8 Sun Protection AVZ Version 1.10
9 Part number Description Paint finish Length in m Alu roller support profile Gota (* = textured) RAL 9005 jet black* Idem RAL 9005 jet black* Idem RAL 9005 jet black* Alu roller support profile Gota (* = textured) Sepia brown* Idem Sepia brown* Idem Sepia brown* Nylon insert drain, incl. 2 adhesive strips, for roller support profile Light grey Plate screw with countersunk Philips head 4.2 x 45 mm (For fixing the top cover support and roller support profile to the mounting plate) Alu front profile Gota Mill finish Idem Mill finish Idem Mill finish Alu front profile Gota silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Idem silver anodized Alu front profile Gota RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Idem RAL 9010 pure white Alu front profile Gota RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream Idem RAL 9001 cream 6.0 Version 1.10 Sun Protection AVZ G.9
10 Part number Description Paint finish Length in m Alu front profile Gota (* = textured) RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Idem RAL 7016 anthracite grey* Alu front profile Gota (* = textured) RAL 9005 jet black* Idem RAL 9005 jet black* Idem RAL 9005 jet black* Alu front profile Gota (* = textured) Sepia brown* Idem Sepia brown* Idem Sepia brown* Nylon end cap front profile, left RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Nylon end cap front profile, right RAL 705 light grey Idem RAL 9010 pure white Idem RAL 9001 cream Idem (* = textured) RAL 7016 anthracite grey* Idem (* = textured) RAL 9005 jet black* Idem (* = textured) Sepia brown* Stainless steel (AISI410) drill ZB.BK/KK.5 x 9.5 mm (For fixing end cap to front profile) 100 Further requirements: - Rollers refer to chapter 1 - Multipurpose folding arms and accessories refer to chapter 2 G.10 Sun Protection AVZ Version 1.10
SolidScreen XL. Version 1.05 Sun Protection AVZ 6P.1
Version 1.05 Sun Protection AVZ P.1 P.2 Sun Protection AVZ Versie 1.05 4453 470-000 End fix bracket Screen 150 square without spindle, left Mill finish 4453 472-000 Idem, right Mill finish 4453 470-008
More informationManufacturing and installation instruction. Solidare Verso. Pergola awning (bottom mounted)
Manufacturing and installation instruction Solidare Verso Pergola awning (bottom mounted) Solidare Verso pergola awning 11-05-2017 * * A T T E N T I O N * * AVZ accepts no liability for any errors in this
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationPiazzola Pergola Awning Manufacturing and installation guide
Piazzola Pergola Awning Manufacturing and installation guide Date Changes Page General information Maximum and minimum width Width Projection 150 to 349 cm 350 to 500 cm From 200 to 250 cm X From 251 to
More informationSliding Door Hardware-Glass Bottom Rolling System
Sliding Door Hardware-Glass Silent Aluflex 0 Maximum door weight: 0 kg ( lbs.) Maximum internal height:,500 mm (9 / ) Mullions are recommended for doors taller than 000 mm ( 3/ ) Door width: 500 500 mm
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationDoor & Window Systems
Lift Slide CURRENT LOGO Door & Window Systems Lift Slide Door & Window Pages System Components B-2 to B-5 Door Carriages & Gears B-6 to B-8 Half Gears, extensions B-9 to B-10 Window Carriages & Gears B-11
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationMETALPLAST-SOPRANA BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 VERSION WITH OVERTURNED PART ADJUSTABLE HINGE
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationMETALPLAST-SOPRANA BRUINO TO VIA VOLVERA
1 4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com VERSION WITH OVERTURNED PART HINGES WELDABLE
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationHubble GOTO Installation Instruction (1.3, 04/30/2014)
Hubble GOTO Installation Instruction (1.3, 04/30/2014) 1. Preparation... 1 1.1 Tools required... 1 1.2 AZ GOTO Drive Parts List...1 1.3 ALT GOTO Drive Parts List... 1 2. The Azimuth motor drive installation...2
More informationParts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationGrommets & OFFICE Accessories
Groets & OFFICE Accessories The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve the right to make design improvements.
More informationHYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART
R Ingersoll HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog 8-3091 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO INDEX Deck. Belt and Idler Pulley...5 Mounting Bracket...7 Rear Wheels...7 Hydraulic Drive...9-13
More informationPARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS
NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS Form A277D Date 2008July11/C Page 1 of 8 4. 14309 Ring O 5. 14312 Ring O 12. 54156
More informationProject 8.1a Model A Button Maker
Page 1 of 16 Project 8.1a Model A Button Maker Introduction Interpreting dimensioned drawings is an important engineering skill. Using drawings to create a computer model of a part is also important. You
More informationPARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationSLIDING DOOR SYSTEMS: INSTALLATION INSTRUCTIONS SLANTED DOOR GUIDE
SLIDING DOOR SYSTEMS: INSTALLATION INSTRUCTIONS SLANTED DOOR GUIDE Version 3 (Up to date, january 2011) manufacturing assembly easy medium difficult subjekt to technical changes CONTENTS General / tools_page
More informationV twin cylinder steam engine
V twin cylinder steam engine I got inspired to make this V twin steam engine after reading R. Griffinn s build articles in ME 4396. It is based on Stuart s V-twin double-acting oscillator, but since I
More informationAn ASSA ABLOY Group company
An ASSA ABLOY Group company AS A SPECIALIST MANUFACTURER OF WINDOW ACCESSORIES FOR TOPHUNG OUTWARD PROJECTING WINDOWS, RIVALU OFFERS YOU A COMPLETE RANGE OF SOLUTIONS FOR THE CLOSING OF YOUR WINDOW IMPERVIOUSNESS
More information488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7
More informationARIANNA NEW RANGE OF HANDLES. New design with strong shapes Complete range Long-lasting durability Sturdy and fluid
ARIANNA NEW RANGE OF HANDLES New design with strong shapes Complete range Long-lasting durability Sturdy and fluid 02 General features ARIANNA. General features 03 BEAUTY WITHIN REACH If today's market
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationSection E SWEEP WAGON
Section E SWEEP WAGON 1E 2E Index No. Part No. Description 1. 47-042058-002 Sweep Wagon Frame with Leaf Springs N.A. Sweep Wagon Frame without Leaf Springs 2. 47-041769-003 Sweep Board Only (brown for
More informationParts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationWINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET D PVC
WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.1 Tilt&Turn Hardware UNI-JET D PVC Table of Contents 06.1 UNI-JET D PVC 06 1 DIRIGENT T&T Handle...06.1.9 Tilt&Turn...06.1.10 Turn-Only Sash...06.1.14 Dummy-mullion
More informationModel No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationSilent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best
Silent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best Escape the mundane and discover something special: Unusual inspirations and surprising solutions for your space
More informationC PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE
88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationInstalling the Partridge RA Extension on Losmandy G11
Installing the Partridge RA Extension on Losmandy G11 Michael Herman July 20, 2015 Tools: 3/16 inch hex key (allen wrench) [If desired for DEC indicator ring friction improvement: flat screwdriver, and
More informationCHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog
R Ingersoll CHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog 8-3291 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO ALPHABETICAL Body, Hopper and Shredder Hammers...5 Chipper Assembly...7 Trailer
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More informationRecord the serial number and date of purchase in your manual for future reference.
10 Woodworking Bandsaw Model: 10-305 Parts List Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: Part # 10-305PL1 For more information:
More informationAluminum frame packing list of Smart Laser CO2
Aluminum frame packing list of Smart Laser CO2 1 805mm V-slot 20mm*40mm 1 2 780mm V-slot 20mm*40mm 2 3 860mm Aluminum frame 20mm*40mm 3 4 177mm Aluminum frame 20mm*40mm 1 5 85mm Aluminum frame 20mm*40mm
More informationMedium-base Lampholders
Medium-base Lampholders For HID Lamps Medium-base lampholders Material: porcelain, white Nominal rating: 4A/250V/5kV pulse rated Terminals: bushings with set screws 18 14AWG solid Screw shell insert: zinc-plated
More informationCATALOG OF REPLACEMENT PARTS
The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS
More informationEMS-2025scl 230v. Sliding Compound Mitre Saw Fig.1. Revision Date 26/01/2006
Fig.1 Fig.2 701 inc 2,702,703,704 1 Base 93 089100102700 Space washer Base Assembly Parts (A) 30.23 94 Screw, for base, 45 152 Miter scale label, 2 089100102002 Rubber feet 0.10 702 Pivot Shaft & Screw
More informationGeneral Features. Low Profile. The SMART BOXX stands only 1.5 off of the bed of your truck so cargo space is maximized
General Features Low Profile. The SMART BOXX stands only 1.5 off of the bed of your truck so cargo space is maximized Two Sizes Short Box :74 L X 47 W X 7 T and Long Box 92 L X 47 W X 7 T All Aluminium
More informationSPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
More informationParts Catalog Admiral 28 Cylindrical Scrubber
Parts Catalog Table of Contents Front bounce protection (97116834)... 4 Wheel suspension (97103725)... 6 Chassis (97115422)... 8 (97114763)... 10 Steering (97073738)... 12 Seat bracket (97118616)... 14
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationFor Euro grooves and NC International profiles
RIBANTA For Euro grooves and NC International profiles - All accessories are frontally applied - Connection rods are modular and provided already pre-cut to standard sizes - All parts are pre-assembled
More informationThe Mind Project s Iris 1 Robotic Arm. Packing List Assembly instructions
The Mind Project s Iris 1 Robotic Arm Packing List Assembly instructions Packing list Below you will find pictures and descriptions of each part. It may be helpful to take each piece out of the bag and
More informationSELF-TAPPING SCREW FIXINGS
Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head
More informationComponents made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH
Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that
More informationASSEMBLY MANUAL CONTENTS. Specifications
ASSEMBLY MANUAL Specifications Length : 986mm / 38.82in Height : 321mm / 12.64in Width (Landing strut) : 158mm / 6.22in Flying Weight : 2,300g / 5.07lb or more Main Rotor Dia. : 1,142mm / 44.96in Tail
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More informationMODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
More informationThe Mind Project s Iris 1 Robotic Arm. Assembly instructions Step 1
The Mind Project s Iris 1 Robotic Arm Assembly instructions Step 1 Packing list Below you will find pictures and descriptions of each part. It may be helpful to take each piece out of the bag and place
More informationSTONE EXTREME /29/2013 PART NUMBER
STONE EXTREME 700 PART NUMBER 005 STONEKOR LLC -800-6-059 customerservice@stonekor.com www.stonekor.com 9 0 6 0 6 5 0 8 6 5 7 STONE EXTREME 700 5 5 7 7 6 0 MACHINE: 005 5 5 8 7 8 9 0 9 STONEKOR LLC -800-6-059
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationUniversal ARCOS EA. Patch Fittings
Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings
More informationDUALCASE VERSATILE ALUMINIUM SIGN SYSTEM
VERSATILE ALUMINIUM SIGN SYSTEM Universal Components Ltd. May 2007 Introduction Nothing beats DualCase for speed of fabrication, aesthetic appearance and easy maintenance. With the minium of components
More informationParts List. Knight 600E. Version 1.5/2008
Parts List Knight 600E Version 1.5/2008 How to order your parts! 1. Check part number on the drawing 2. Use the part number to find the ORDER number on the list 3. Only use ORDER number for your parts
More informationThuys Engineering Parts Lists
Parts Lists The list below was developed for AJS parts, but all nuts and bolts are Cycle Engineering Institute threads that are common on all British motorcycles built before 1970. Contact Details FRAME
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationSLIDING GATES BRUNDLE
SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour
More informationFASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
More informationCOMPONENTS AND ACCESSORIES FOR FITTING TIPPERS
Hinges for aluminium side boards M 15020 Raw light perforated support M 15010 Zinc-plated light double opening hinge X 40070 Zinc-plated head cap screw 8x20 M 15030 Light raw locking plate M 15620 Zinc-plated
More informationK/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
More informationUNI DIN UNI DIN 7982.
Tapping screws with cylindrical head cross UNI 6954. DIN 7981. Material 15800***** GALVANIZED STEEL WHITE 16900***** GALVANIZED STEEL BLACK 15700***** STAINLESS STEEL A-AISI 304 157A4***** STAINLESS STEEL
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationPANIC BARS Marking IN ACCORDANCE WITH 1125:1997/A1:2001
PANIC BARS Marking IN ACCORDANCE WITH 25:997/A:200 Exclusive PININFARINA design Full adaptability in application Quick and easy installation Reliable and safe performance Tested up to 2.000.000 cycles
More information(Clearance > 10mm) Fig. 1
INSTALLATION MANUAL PRECAUTIONS Before commencing the installation it is important to read this section first. Travel Length 1. The travel length of the glass graduated scale must be longer than the maximum
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More information77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)
ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,
More informationHD38, HD58, HD78 REV
HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869
More informationParts and tools needed for installation- Cleaning and Painting -
Thank you for the purchase of our JK Rear Trail Doors. We have made these from 6061-T6 aluminum and reinforced them with stiffeners at the top that double as a comfortable armrest and support for Rugged
More informationModel No: SM2502. Parts Information: Mini Drilling & Milling Machine
Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007
More informationAstro-Physics Inc. 400QMD Lubrication/Maintenance Guide
Astro-Physics Inc. 400QMD Lubrication/Maintenance Guide The following guidelines should be followed to lubricate the three main parts of the 400QMD mount. The QMD stands for Quartz Micro-Drive controller.
More informationDraw-Bar Spare Parts JANUARY 2019
Draw-Bar Spare Parts The Diamond Chase Draw-Bar Frame will last you a life time. The frame is guaranteed watertight for life. Replacement draw bars, bolts, and the nylon locking rod are available as needed.
More informationM2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4
M2 Assembly Table of Contents M2 Sub-Assemblies... 3 630mm Belt Sub-Assembly... 3 702mm Belt Sub-Assembly... 3 Spider Sub-Assembly... 4 Idler Bolt Sub-Assembly... 8 Y Motor Sub-Assembly... 9 X Motor Sub-Assembly...
More informationAuthority22 Transition Roller for Existing Machines
Authority22 Transition Roller for Existing Machines Upgrade Packaging 1 per Authority22 14-860241-000 Package Transition Roller Upgrade Kit NOTE: Due to installation requirements, the parts will be packaged
More information7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More informationParts Catalog Collector 34 Model Gasoline
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1
More informationFOLDING HARDWARE STARTEC T-SNAP G2/G4
FOLDING HARDWARE STARTEC T-SNAP G2/G4 T-SNAP G2 T-SNAP G4 Technical data: 40 kg for package throughout Height according 36+7 mm Fix bracket every 400 mm T-SNAP G2: 1x door leaf package T-SNAP G4: 2x door
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationPRINT MAY BE REDUCED - DO NOT SCALE. No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling
Date 05/207 By No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling Technical Information: 2x Bugle Screw Guide Fixing Optional Non-penetrating Fixingss to Ground
More informationParts Catalog Collector 34 Model Battery
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-20)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering B (97104855)... 10 Travel drive, part 1
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationParts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 08 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG /6/08 Rev. R IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationCarousels - Overlapping Slat
Carousels - Overlapping Slat Introduction The overlapping slat carousel is designed to re-circulate baggage through a series of rectangular shaped slats overlapped and linked to form a continuous loop.
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 0441-2139 www.fi sherplows.com 96001 March 15, 2019 Lit. No. 9544, Rev. 10 Hopper and Drive Components POLY-CASTER Hopper Spreader Parts List This Parts
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationFOLDING ARM AWNING FITTING INSTRUCTIONS
FOLDING ARM AWNING FITTING INSTRUCTIONS (INCLUDING OPTIONAL UPGRADE RAFTER BRACKET FIXING) Your new Outdoor Awning has been custom built for you from the highest quality materials please follow the installation
More informationFURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
More informationInstallation manual. For setting in concrete/on base plates - Panel height 1830
1 Aluminium fencing and drive-in gates Installation manual For setting in concrete/on base plates - Panel height 1830 Aluclos system components: U10 Connecting U-bracket 1900 mm CL18/CL18.XL Half-height
More informationProjector Flush Mount
Projector Flush Mount ABtUS SIGAPORE PTE LTD Model: AV819 www.abtussingapore.com Patent Pending Revision 21/05/2012 ABtUS SINGAPORE PTE LTD www.abtussingapore.com User Operation Guide IMPORTANT NOTES Thank
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More information