Low-Cost, Micropower, SC70/SOT23-8, Microphone Preamplifiers with Complete Shutdown
|
|
- Kory Dean
- 5 years ago
- Views:
Transcription
1 9-95; Rev ; 4/ General Description The are micropower op amps optimized for use as microphone preamplifiers. They provide the ideal combination of an optimized gain bandwidth product vs. supply current, and low voltage operation in ultra-small packages. The MAX4465/ MAX4467/MAX4469 are unity-gain stable and deliver a 2kHz gain bandwidth from only 24µA of supply current. The MAX4466/MAX4468 are decompensated for a minimum stable gain of +5V/V and provide a 6kHz gain bandwidth product. In addition, these amplifiers feature Rail-to-Rail outputs, high A VOL, plus excellent power-supply rejection and common-mode rejection ratios for operation in noisy environments. The MAX4467/MAX4468 include a complete shutdown mode. In shutdown, the amplifiers supply current is reduced to 5nA and the bias current to the external microphone is cut off for ultimate power savings. The single MAX4465/MAX4466 are offered in the ultra-small 5-pin SC7 package, while the single with shutdown MAX4467/MAX4468 and dual MAX4469 are available in the space-saving 8-pin SOT23 package. Microphone Preamplifiers Hearing Aids Cellular Phones Voice-Recognition Systems Digital Dictation Devices Headsets Portable Computing Applications Pin Configurations Features +2.4V to +5.5V Supply Voltage Operation Versions with 5nA Complete Shutdown Available (MAX4467/MAX4468) Excellent Power-Supply Rejection Ratio: 2dB Excellent Common-Mode Rejection Ratio: 26dB High A VOL : 25dB (R L = kω) Rail-to-Rail Outputs Low 24µA Quiescent Supply Current Gain Bandwidth Product: 2kHz (MAX4465/MAX4467/MAX4469) 6kHz A V 5 (MAX4466/MAX4468) Available in Space-Saving Packages 5-Pin SC7 (MAX4465/MAX4466) 8-Pin SOT23 (MAX4467/MAX4468/MAX4469) Ordering Information PART TEMP. RANGE PIN-PACKAGE MAX4465EXK-T -4 C to +85 C 5 SC7-5 MAX4465EUK-T -4 C to +85 C 5 SOT23-5 MAX4466EXK-T -4 C to +85 C 5 SC7-5 MAX4466EUK-T -4 C to +85 C 5 SOT23-5 Ordering Information continued at end of data sheet. R BIAS Typical Operating Circuit V CC SHDN TOP VIEW C BIAS R DC MIC_BIAS IN+ 5 V CC R BIAS IN+ GND 2 MAX4465 MAX4466 C IN R IN IN- OUT IN- 3 4 OUT C BYPASS RDC GND MAX4467 MAX4468 SC7/SOT23 Pin Configurations continued at end of data sheet. Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. MICROPHONE CAPSULE MAX4467/MAX4468 TYPICAL OPERATING CIRCUIT WITH COMPLETE SHUTDOWN R FB Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at , or visit Maxim s website at
2 ABSOLUTE MAXIMUM RATINGS Supply Voltage (V CC to GND)...+6V All Other Pins to GND...-.3V to (V CC +.3V) Output Short-Circuit Duration OUT Shorted to GND or V CC...Continuous Continuous Power Dissipation (T A = +7 C) 5-Pin SC7 (derate 2.5mW/ C above +7 C)...2mW 5-Pin SOT23 (derate 7.mW/ C above +7 C)...57mW 8-Pin SOT23 (derate 5.3mW/ C above +7 C)...42mW 8-Pin SO (derate 5.88mW/ C above +7 C)...47mW Operating Temperature Range...-4 C to +85 C Storage Temperature Range C to +5 C Junction Temperature...+5 C Lead Temperature (soldering, s)...+3 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V CC = +5V, V CM =, V OUT = V CC /2, R L = to V CC /2, SHDN = GND (MAX4467/MAX4468 only). T A = T MIN to T MAX, unless otherwise noted. Typical values specified at T A = +25 C.) (Note ) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Supply Voltage Range V CC Inferred from PSRR test V Supply Current (Per Amplifier) T A = +25 C I CC T A = T MIN to T MAX 6 Supply Current in Shutdown I SHDN SHDN = V CC (Note 2) 5 5 na Input Offset Voltage V OS ± ±5 mv Input Bias Current I B V CM = -.V ±2.5 ± na Input Offset Current Range I OS V CM = -.V ± ±5 na Input Common-Mode Range V CM Inferred from CMRR test -. V CC -. V C om m on- M od e Rej ecti on Rati o CMRR -.V V CM V CC - V 8 26 db Power-Supply Rejection Ratio PSRR 2.4V V CC 5.5V 8 2 MAX4465/MAX4467/MAX4469, f = 3.4kHz 75 MAX4466/MAX4468, f = 3.4kHz 8 R L = kω to V CC /2,.5V V OUT V CC -.5V Open-Loop Gain A VOL R L = kω to V CC /2,.V V OUT V CC -.V Output Voltage Swing High V OH IV CC - V OHI R L = kω R L = kω 6 5 R L = kω Output Voltage Swing Low V OL R L = kω 4 5 µa db db mv mv Output Short-Circuit Current To either supply rail 5 ma Output Leakage Current in Shutdown SHDN = V CC, V OUT V CC ; (Notes 2, 3) ±.5 ± na SHDN Logic Low V IL (Note 2) V CC.3 V SHDN Logic High V IH (Note 2) V CC.7 V SHDN Input Current (Note 2) 2 25 na Gain Bandwidth Product GBWP MAX4465/MAX4467/MAX MAX4466/MAX khz 2
3 ELECTRICAL CHARACTERISTICS (continued) (V CC = +5V, V CM =, V OUT = V CC /2, R L = to V CC /2, SHDN = GND (MAX4467/MAX4468 only), T A = T MIN to T MAX, unless otherwise noted. Typical values specified at T A = +25 C.) (Note ) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Channel-to-Channel Isolation MAX4469 only, f = khz 85 db Phase Margin Ø M R L = kω 7 d egr ees Gain Margin R L = kω 2 db Slew Rate SR Output step = 4V MAX4465/MAX4467/ MAX4469, A V = + MAX4466/MAX4468, A V = +5 Input Noise Voltage Density e n f = khz 8 nv/ Hz Total Harmonic Distortion THD f = khz, R L = kω, V OUT = 2Vp-p M AX 4465/M AX 4467/ M AX MAX4466/MAX Capacitive Load Stability C LOAD MAX4465/MAX4467/MAX4469, A V = + MAX4466/MAX4468, A V = +5 mv/µs % pf SHDN Delay Time t SHDN (Note 2) µs Enable Delay Time t EN (Note 2) 5 µs Power-On Time t ON (Note 2) 4 µs Bias Switch On-Resistance R S I S = 5mA (Note 2) 2 5 Ω Note : All specifications are % production tested at T A = +25 C. All temperature limits are guaranteed by design. Note 2: Shutdown mode is available only on the MAX4467/MAX4468. Note 3: External feedback networks not considered. Typical Operating Characteristics (V CC = +5V, V CM =, V OUT = V CC /2, R L = kω to V CC /2, SHDN = GND (MAX4467/MAX4468 only), T A = +25 C, unless otherwise noted.) GAIN (db)/phase (DEGREES) MAX4465/MAX4467/MAX4469 GAIN AND PHASE vs. FREQUENCY (NO LOAD) k k k M FREQUENCY (Hz) MAX toc GAIN (db)/phase (DEGREES) MAX4466/MAX4468 GAIN AND PHASE vs. FREQUENCY (NO LOAD) k k k M FREQUENCY (Hz) MAX toc2 GAIN (db)/phase (DEGREES) MAX4465/MAX4467/MAX4469 GAIN AND PHASE vs. FREQUENCY (C L = pf) k k k M FREQUENCY (Hz) MAX toc3 3
4 PSRR (db) POWER-SUPPLY REJECTION RATIO vs. FREQUENCY -3 k k k M FREQUENCY (Hz) MAX toc4 SUPPLY CURRENT (pa), Typical Operating Characteristics (continued) (V CC = +5V, V CM =, V OUT = V CC /2, R L = kω to V CC /2, SHDN = GND (MAX4467/MAX4468 only), T A = +25 C, unless otherwise noted.) SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE V SHDN = V CC TEMPERATURE ( C) MAX toc5 SUPPLY CURRENT (µa) SUPPLY CURRENT vs. TEMPERATURE TEMPERATURE ( C) MAX toc6 ILEAK (pa) OUTPUT LEAKAGE CURRENT vs. TEMPERATURE V SHDN = V CC V OUT = V CC /2 MAX toc7 CHANNEL-TO-CHANNEL ISOLATION (db) CHANNEL-TO-CHANNEL ISOLATION vs. FREQUENCY MAX toc8 VOS (µv) INPUT OFFSET VOLTAGE vs. TEMPERATURE MAX toc TEMPERATURE ( C) -. FREQUENCY (khz) TEMPERATURE ( C) VDD - VOUT (mv) OUTPUT VOLTAGE SWING HIGH vs. TEMPERATURE MAX toc VOUT - VSS (mv) OUTPUT VOLTAGE SWING LOW vs. TEMPERATURE MAX toc CMRR (db) COMMON-MODE REJECTION RATIO vs. TEMPERATURE MAX toc TEMPERATURE ( C) TEMPERATURE ( C) TEMPERATURE ( C) 4
5 GAIN (db) LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE V OUT (V) MAX4465/MAX4467/MAX4469 TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY V OUT = 2Vp-p A V = +V/V BW = 22kHz MAX toc3 MAX toc6 GAIN (db) Typical Operating Characteristics (continued) (V CC = +5V, V CM =, V OUT = V CC /2, R L = kω to V CC /2, SHDN = GND (MAX4467/MAX4468 only), T A = +25 C, unless otherwise noted.) LARGE-SIGNAL GAIN vs. TEMPERATURE TEMPERATURE ( C) MAX toc MAX4466/MAX4468 TOTAL HARMONIC DISTORTION vs. FREQUENCY VOUT = 2Vp-p AV = +V/V BW = 22kHz MAX toc7 VMIN (V) MINIMUM OPERATING VOLTAGE vs. TEMPERATURE TEMPERATURE ( C) MAX4465/MAX4467/MAX4469 TOTAL HARMONIC DISTORTION PLUS NOISE vs. INPUT AMPLITUDE f = khz A V = +V/V BW = 22kHz MAX toc5 MAX toc8 THD + N (%). R L = kω THD + N (%). R L = kω THD + N (%). R L = kω. R L = kω k 2k FREQUENCY (Hz) MAX4466/MAX4468 TOTAL HARMONIC DISTORTION PLUS NOISE vs. INPUT AMPLITUDE f = khz A V = +V/V BW = 22kHz MAX toc9. R L = kω k 2k FREQUENCY (Hz) NONINVERTING SMALL-SIGNAL TRANSIENT RESPONSE MAX toc2.. R L = kω V IN (Vp-p) NONINVERTING LARGE-SIGNAL TRANSIENT RESPONSE MAX toc2 THD + N (%). R L = kω 5mV/div 2V/div. R L = kω V IN (Vp-p) 2µs/div 2µs/div 5
6 Typical Operating Characteristics (continued) (V CC = +5V, V CM =, V OUT = V CC /2, R L = kω to V CC /2, SHDN = GND (MAX4467/MAX4468 only), T A = +25 C, unless otherwise noted.) SUPPLY CURRENT (µa) SUPPLY CURRENT vs. SUPPLY VOLTAGE SUPPLY VOLTAGE (V) MAX toc22 enoise (nv Hz) A VCL = +V/V e NOISE vs. FREQUENCY 4 k k k M FREQUENCY (Hz) MAX toc SINK CURRENT vs. OUTPUT VOLTAGE MAX toc SOURCE CURRENT vs. OUTPUT VOLTAGE MAX toc25 SINK CURRENT (ma) 5 V CC = +5V SOURCE CURRENT (ma) 5 V CC = +5V 5 V CC = +2.4V 5 V CC = +2.4V OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) Pin Description PIN MAX4465 MAX4466 MAX4467 MAX4468 MAX4469 NAME FUNCTION 4 6 (8) OUT Amplifier Output OUTA Amplifier Output A (4) MIC_BIAS External Microphone Bias Network Switch Output 3 2 (3) IN- Inverting Amplifier Input 3 (2) IN+ Noninverting Amplifier Input 2 4 () 4 GND Ground ( ) denotes ST23 package of the MAX4467/MAX4468 6
7 MAX4465 MAX4466 PIN MAX4467 MAX4468 MAX4469 NAME Pin Description (continued) FUNCTION 5 7 (7) 8 V CC Positive Supply. Bypass with a.µf capacitor to GND. 2 INA- Inverting Amplifier Input A 3 INA+ Noninverting Amplifier Input A 6 INB- Inverting Amplifier Input B 5 INB+ Noninverting Amplifier Input B 7 OUTB Amplifier Output B 8 (6) SHDN Active-High Shutdown Input. Connect to GND for normal operation. Connect to V CC for shutdown. Do not leave floating. 5 (5) N.C. No Connection. Not internally connected. ( ) denotes SOT23 package of the MAX4467/MAX4468. Detailed Description The are low-power, micropower op amps designed to be used as microphone preamplifiers. These preamplifiers are an excellent choice for noisy environments because of their high commonmode rejection and excellent power-supply rejection ratios. They operate from a single +2.4V to +5.5V supply. The MAX4465/MAX4467/MAX4469 are unity-gain stable and deliver a 2kHz gain bandwidth from only 24µA of supply current. The MAX4466/MAX4468 have a minimum stable gain of +5V/V while providing a 6kHz gain bandwidth product. The MAX4467/MAX4468 feature a complete shutdown, which is active-high, and a shutdown-controlled output providing bias to the microphone. The MAX4465/ MAX4467/MAX4469 feature a slew rate suited to voice channel applications. The MAX4466/MAX4468 can be used for full-range audio, e.g., PC99 inputs. Rail-to-Rail Output Stage The can drive a kω load and still typically swing within 6mV of the supply rails. Figure shows the output voltage swing of the MAX4465 configured with A V = +. Switched Bias Supply When used as a microphone amplifier for an electret microphone, some form of DC bias for the microphone is necessary. The MAX4467/MAX4468 have the ability to turn off the bias to the microphone when the device is in shutdown. This can save several hundred microamps of supply current, which can be significant in low power applications. The MIC_BIAS pin provides a switched version of V CC to the bias components. Figure 3 shows some typical values. Driving Capacitive Loads Driving a capacitive load can cause instability in many op amps, especially those with low quiescent current. The MAX4465/MAX4467/MAX4469 are unity-gain stable for a range of capacitive loads up to pf. Figure 4 shows the response of the MAX4465 with an excessive capacitive load. Applications Information Shutdown Mode The MAX4467 and MAX4468 feature a low-power, complete shutdown mode. When SHDN goes high, the supply current drops to 5nA, the output enters a high impedance state and the bias current to the microphone is switched off. Pull SHDN low to enable the amplifier. Do not leave SHDN floating. Figure 5 shows the shutdown waveform. Common-Mode Rejection Ratio A microphone preamplifier ideally only amplifies the signal present on its input and converts it to a voltage appearing at the output. When used in noninverting mode, there is a small output voltage fluctuation when both inputs experience the same voltage change in the 7
8 common mode. The ratio of these voltages is called the common-mode gain. The common-mode rejection ratio is the ratio of differential-mode gain to common-mode gain. The high CMRR properties of the provide outstanding performances when configured as a noninverting microphone preamplifier. Power-Up The outputs typically settle within µs after power-up. Figure 6 shows the output voltage on power-up. Power Supplies and Layout The operate from a single +2.4V to +5.5V power supply. Bypass the power supply with a.µf capacitor to ground. Good layout techniques are necessary for the family. To decrease stray capacitance, minimize trace lengths by placing external components close to the op amp s pins. Surface-mount components are recommended. In systems where analog and digital grounds are available, the should be connected to the analog ground. Test Circuits/Timing Diagrams V/div µs/div Figure. Rail-to-Rail Output Operation +5V +5V 2kΩ V CC = +5V 2kΩ.µF MΩ MAX IN+.µF MΩ 4 OUT ELECTRET CAPSULE kω IN- 3 2 GND µf kω pf Figure 2. MAX4466 Typical Application Circuit 8
9 MICROPHONE INPUT µf kω 2.2kΩ kω kω Test Circuits/Timing Diagrams (continued) V CC SHDN MIC_BIAS IN+ OUT.µF IN- MAX4468 GND.µF 2kΩ 3.5mm SOCKET 2kΩ 47pF Figure 3. Bias Network Circuit C L = 2pF RL = kω CL = pf SHDN 5mV/div 2V/div OUT 4µs/div Figure 4. Small-Signal Transient Response with Excessive Capacitive Load 4µs/div Figure 5. MAX4467/MAX4468 Shutdown Waveform 9
10 2µs/div Figure 6. Power-Up/Power-Down Waveform Test Circuits/Timing Diagrams (continued) V CC 2V/div OUT V/div Chip Information MAX4465/MAX4466 TRANSISTOR COUNT: 62 MAX4467/MAX4468 TRANSISTOR COUNT: 72 MAX4469 TRANSISTOR COUNT: 3 PROCESS: BiCMOS Ordering Information (continued) PART TEMP. RANGE PIN-PACKAGE MAX4467EKA-T -4 C to +85 C 8 SOT23-8 MAX4467ESA -4 C to +85 C 8 SO MAX4468EKA-T -4 C to +85 C 8 SOT23-8 MAX4468ESA -4 C to +85 C 8 SO MAX4469EKA-T -4 C to +85 C 8 SOT23-8 MAX4469ESA -4 C to +85 C 8 SO Selector Guide PART MINIMUM STABLE GAIN EXTERNAL MICROPHONE SHDN GBWP (khz) PIN-PACKAGE MAX No 2 5 SC7/5 SOT23 MAX No 6 5 SC7/5 SOT23 MAX Yes 2 8 SOT23/8 SO MAX Yes 6 8 SOT23/8 SO MAX No 2 8 SOT23/8 SO Pin Configurations (continued) GND 8 OUT MIC_BIAS 8 SHDN OUTA 8 V CC IN+ IN- IN- 2 3 MAX4467 MAX V CC SHDN INA- IN+ 2 3 MAX4467 MAX V CC OUT INB- INA+ 2 3 MAX OUTB MIC_BIAS 4 5 N.C. GND 4 5 N.C. GND 4 5 INB+ SOT23 SO SOT23/SO
11 Package Information SC7, 5L.EPS
12 Package Information (continued) SOT5L.EPS 2
13 Package Information (continued) SOT23, 8L.EPS 3
14 Package Information (continued) SOICN.EPS Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 4 Maxim Integrated Products, 2 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
15 This datasheet has been download from: Datasheets for electronics components.
16 page date of 4 6/28 PART NUMBER: CMA-4544PF-W DESCRIPTION: electret condenser microphone SPECIFICATIONS directivity omnidirectional sensitivity (S) -44 ±2 db f = KHz, Pa db = V/Pa sensitivity reduction (ΔS-Vs) -3 db f = KHz, Pa Vs = 3. ~ 2. V dc operating voltage 3 V dc (standard), V dc (max.) output impedance (Zout) 2.2 KΩ f = KHz, Pa operating frequency (f) 2 ~ 2, Hz current consumption (IDSS).5 ma max. Vs = 3. V dc RL = 2.2KΩ signal to noise ratio (S/N) 6 dba f = KHz, Pa A-weighted operating temperature -2 ~ +7 C storage temperature -2 ~ +7 C dimensions ø9.7 x 4.5 mm weight.8 g max. material Al terminal pin type (hand soldering only) RoHS yes note: We use the Pascal (Pa) indication of sensitivity as per the recomendation of I.E.C. (International Electrotechnical Commission). The sensitivity of Pa will increase 2dB compared to the ubar indication. Example: -6dB (db = V/ubar) = -4dB (V/Pa) APPEARANCE DRAWING 25 SW 2 th Ave. Tualatin, Oregon 9762 phone fax
17 page date 2 of 4 6/28 PART NUMBER: CMA-4544PF-W DESCRIPTION: electret condenser microphone MEASUREMENT CIRCUIT FREQUENCY RESPONSE CURVE 25 SW 2 th Ave. Tualatin, Oregon 9762 phone fax
18 page date 3 of 4 6/28 PART NUMBER: CMA-4544PF-W DESCRIPTION: electret condenser microphone MECHANICAL CHARACTERISTICS item test condition soldering heat resistance Lead terminals are immersed in solder bath of 27 ±5 C for 2 ±.5 seconds. PCB wire pull strength The pull force will be applied to double lead wire: Horizontal 4.9N (.5kg) for 3 seconds vibration The part will be measured after applying a vibration amplitude of.5 mm with to 55 Hz band of vibration frequency to each of the 3 perpendicular directions for 2 hours. drop test The part will be dropped from a height of m onto a 2 mm thick wooden board 3 times in 3 axes (X, Y, Z) for a total of 9 drops. evaluation standard No interference in operation. No damage or cutting off. After any tests, the sensitivity should be within ±3dB compared to the initial measurement. ENVIRONMENT TEST item high temp. test low temp. test humidity test temp. cycle test test condition After being placed in a chamber at +7 C for 72 hours. After being placed in a chamber at -2 C for 72 hours. After being placed in a chamber at +4 C and 9±5% relative humidity for 24 hours. The part shall be subjected to cycles. One cycle will consist of: evaluation standard The part will be measured after being placed at +25 C for 6 hours. After any tests, the sensitivity should be within ±3dB compared to the initial measurement. TEST CONDITIONS standard test condition a) temperature: +5 ~ +35 C b) humidity: 45-85% c) pressure: 86-6 mbar judgement test condition a) temperature: +25 ±2 C b) humidity: 6-7% c) pressure: 86-6 mbar 25 SW 2 th Ave. Tualatin, Oregon 9762 phone fax
19 page date 4 of 4 6/28 PART NUMBER: CMA-4544PF-W DESCRIPTION: electret condenser microphone PACKAGING 25 SW 2 th Ave. Tualatin, Oregon 9762 phone fax
1.0V Micropower, SOT23, Operational Amplifier
19-3; Rev ; 1/ 1.V Micropower, SOT3, Operational Amplifier General Description The micropower, operational amplifier is optimized for ultra-low supply voltage operation. The amplifier consumes only 9µA
More informationPART. Maxim Integrated Products 1
- + 9-; Rev ; / Low-Cost, High-Slew-Rate, Rail-to-Rail I/O Op Amps in SC7 General Description The MAX9/MAX9/MAX9 single/dual/quad, low-cost CMOS op amps feature Rail-to-Rail input and output capability
More informationMicropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197
General Description The is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail single-supply operation, outstanding precision specifications, and a high gain bandwidth. This
More informationSingle/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps
9-; Rev 4; 7/ Single/Dual/Quad, +.8V/75nA, SC7, General Description The MAX4464/MAX447/MAX447/MAX447/MAX4474 family of micropower op amps operate from a single +.8V to +5.5V supply and draw only 75nA of
More informationSingle-Supply, 150MHz, 16-Bit Accurate, Ultra-Low Distortion Op Amps
9-; Rev ; /8 Single-Supply, 5MHz, 6-Bit Accurate, General Description The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 6- bit settling time in 3ns, and
More informationI/O Op Amps with Shutdown
MHz, μa, Rail-to-Rail General Description The single MAX994/MAX995 and dual MAX996/ MAX997 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered
More informationV OUT. +Denotes lead(pb)-free/rohs-compliant package. PART
9-346; Rev 2; / 2kHz, 4µA, Rail-to-Rail General Description The single MAX99/MAX99 and dual MAX992/ MAX993 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current
More informationRail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
19-579; Rev ; 12/1 EVALUATION KIT AVAILABLE Rail-to-Rail, 2kHz Op Amp General Description The op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationUltra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs
9-5; Rev 4; /9 Ultra-Small, Low-Cost, MHz, Single-Supply General Description The MAX445 single and MAX445 dual op amps are unity-gain-stable devices that combine high-speed performance with rail-to-rail
More informationLow-Cost, Low-Power, Ultra-Small, 3V/5V, 500MHz Single-Supply Op Amps with Rail-to-Rail Outputs
9-83; Rev ; / Low-Cost, Low-Power, Ultra-Small, 3V/5V, 5MHz General Description The MAX442 single and MAX443 dual operational amplifiers are unity-gain-stable devices that combine high-speed performance,
More informationPrecision, Low-Power and Low-Noise Op Amp with RRIO
MAX41 General Description The MAX41 is a low-power, zero-drift operational amplifier available in a space-saving, 6-bump, wafer-level package (WLP). Designed for use in portable consumer, medical, and
More information6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable
99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using
More informationSC70/SOT23-8, 50mA IOUT, Rail-to-Rail I/O Op Amps with Shutdown/Mute
9-36; Rev ; 9/ SC7/SOT3-8, 5mA I, Rail-to-Rail I/O General Description The op amps deliver 4mW per channel into 3Ω from ultra-small SC7/SOT3 packages making them ideal for mono/stereo headphone drivers
More information+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable
9-5; Rev ; / +V/+5V, 5MHz, SOT ADC Buffer Amplifiers General Description The MAX85/MAX86 single and MAX87/MAX88/ MAX87/MAX88 dual ADC buffer amplifiers feature high-speed performance and single +V supply
More informationUltra-Small, Rail-to-Rail I/O with Disable, Single-/Dual-Supply, Low-Power Op Amps MAX4245/MAX4246/ MAX4247. Features. General Description
General Description The MAX4245/MAX4246/ family of low-cost op amps offer rail-to-rail inputs and outputs, draw only 32µA of quiescent current, and operate from a single +2.5V to +5.5V supply. For additional
More informationnanopower Op Amp in a Tiny 6-Bump WLP
EVALUATION KIT AVAILABLE MAX4464 General Description The MAX4464 is an ultra-small (6-bump WLP) op amp that draws only 75nA of supply current. It operates from a single +.8V to +5.5V supply and features
More informationMAX9812/MAX9813 Tiny, Low-Cost, Single/Dual-Input, Fixed-Gain Microphone Amplifiers with Integrated Bias
General Description The MAX982/MAX983 are single/dual-input, 20dB fixed-gain microphone amplifiers. They offer tiny packaging and a low-noise, integrated microphone bias, making them ideal for portable
More informationNanopower Op Amp in Ultra-Tiny WLP and SOT23 Packages
EVALUATION KIT AVAILABLE MAX47 General Description The MAX47 is a single operational amplifier that provides a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationPrecision, High-Bandwidth Op Amp
EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage
More informationEVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp
19-227; Rev ; 9/1 EVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp General Description The op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device
More informationMAX4267EUA -40 C to +85 C 8 µmax. MAX4268EEE -40 C to +85 C 16 QSOP. MAX4270EEE -40 C to +85 C 16 QSOP
9; Rev ; 8/ Ultra-Low-Distortion, +V, MHz Op Amps with Disable General Description The MAX6 MAX7 ultra-low distortion, voltage-feedback op amps are capable of driving a Ω load while maintaining ultra-low
More informationMAX9650/MAX9651 High-Current VCOM Drive Op Amps for TFT LCDs
General Description The MAX965/MAX9651 are single- and dual-channel VCOM amplifiers with rail-to-rail inputs and outputs. The MAX965/MAX9651 can drive up to 13mA of peak current per channel and operate
More informationV CC OUT MAX9945 IN+ V EE
19-4398; Rev ; 2/9 38V, Low-Noise, MOS-Input, General Description The operational amplifier features an excellent combination of low operating power and low input voltage noise. In addition, MOS inputs
More informationLow-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs
9-824; Rev ; /5 Low-Cost, +3V/+5V, 62µA, 2MHz, General Description The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and / quad amplifiers combine high-speed performance with ultra-low power consumption.
More informationPART. Note: All devices are specified over the -40 C to +125 C operating PART. Maxim Integrated Products 1
9-2424; Rev 2; 5/6 Ultra-Low Offset/Drift, Low-Noise, General Description The are low-noise, low-drift, ultrahigh precision amplifiers that offer near-zero DC offset and drift through the use of autocorrelating
More informationV CC OUT MAX9945 IN+ V EE
19-4398; Rev 1; 12/ 38V, Low-Noise, MOS-Input, General Description The operational amplifier features an excellent combination of low operating power and low input voltage noise. In addition, MOS inputs
More information300MHz, Low-Power, High-Output-Current, Differential Line Driver
9-; Rev ; /9 EVALUATION KIT AVAILABLE 3MHz, Low-Power, General Description The differential line driver offers high-speed performance while consuming only mw of power. Its amplifier has fully symmetrical
More informationTOP VIEW. Maxim Integrated Products 1
19-295; Rev ; 8/1 High-Current VCOM Drive Buffer General Description The is a high-current operational transconductance amplifier. The is ideal for driving the backplane of an active matrix, dot inversion
More informationTOP VIEW. Maxim Integrated Products 1
9-987; Rev ; 9/3 5MHz, Triple, -Channel Video General Description The is a triple, wideband, -channel, noninverting gain-of-two video amplifier with input multiplexing, capable of driving up to two back-terminated
More informationLow-Cost, 230MHz, Single/Quad Op Amps with Rail-to-Rail Outputs and ±15kV ESD Protection OUT
9-4; Rev ; 9/5 Low-Cost, 3MHz, Single/Quad Op Amps with General Description The op amps are unity-gain stable devices that combine high-speed performance, rail-to-rail outputs, and ±5kV ESD protection.
More informationNot Recommended for New Designs
Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains
More informationMicropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
EVALUATION KIT AVAILABLE MAX46 General Description The MAX46 op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for batterypowered applications such as handsets, tablets,
More information400MHz, Ultra-Low-Distortion Op Amps
9; Rev ; /97 EVALUATION KIT AVAILABLE MHz, Ultra-Low-Distortion Op Amps General Description The MAX8/MAX9/MAX8/MAX9 op amps combine ultra-high-speed performance with ultra-lowdistortion operation. The
More informationNot Recommended for New Designs
Not Recommended for New Designs The MAX99 was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. A Maxim replacement
More informationHigh-Precision, Low-Voltage, Micropower Op Amp MAX480. General Description. Features. Ordering Information. Applications.
9-77; Rev a; /98 High-Precision, Low-oltage, General Description The is a precision micropower operational amplifier with flexible power-supply capability. Its guaranteed µ maximum offset voltage (5µ typ)
More informationHigh-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators
9-266; Rev 2; /07 General Description The MAX987/MAX988/MAX99/MAX992/MAX995/ MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating
More information1-Input/4-Output Video Distribution Amplifiers MAX4137/MAX4138
-00; Rev 0; / EVALUATION KIT AVAILABLE General Description The / are -input/-output voltagefeedback amplifiers that combine high speed with fast switching for video distribution applications. The is internally
More information350MHz, Ultra-Low-Noise Op Amps
9-442; Rev ; /95 EVALUATION KIT AVAILABLE 35MHz, Ultra-Low-Noise Op Amps General Description The / op amps combine high-speed performance with ultra-low-noise performance. The is compensated for closed-loop
More informationSGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,
More informationSGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
/2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into
More informationMicropower, SOT23, Rail-to-Rail, Fixed-Gain, GainAmp/Open-Loop Op Amps
96; Rev ; /99 Micropower, SOT, Rail-to-Rail, General Description The MAX7 MAX78 GainAmp op amp family combines low-cost Rail-to-Rail op amps with precision internal gain-setting resistors. Factory-trimmed
More informationNot Recommended for New Designs
Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains
More information+2.7V to +5.5V, Low-Power, Triple, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
19-1560; Rev 1; 7/05 +2.7V to +5.5V, Low-Power, Triple, Parallel General Description The parallel-input, voltage-output, triple 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V
More informationLow-Voltage, 1.8kHz PWM Output Temperature Sensors
19-266; Rev 1; 1/3 Low-Voltage, 1.8kHz PWM Output Temperature General Description The are high-accuracy, low-power temperature sensors with a single-wire output. The convert the ambient temperature into
More informationPART MAX4144ESD MAX4146ESD. Typical Application Circuit. R t IN- IN+ TWISTED-PAIR-TO-COAX CABLE CONVERTER
9-47; Rev ; 9/9 EVALUATION KIT AVAILABLE General Description The / differential line receivers offer unparalleled high-speed performance. Utilizing a threeop-amp instrumentation amplifier architecture,
More information10MHz/42MHz Low Noise, Low Bias Op-Amps
MAX475/MAX488 1MHz/42MHz Low Noise, Low Bias Op-Amps General Description The MAX475/MAX488 are wideband, low-noise, low-input bias current operational amplifiers offering railto-rail outputs and single-supply
More informationMAX4249 MAX4257 UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps
EVALUATION KIT AVAILABLE MAX4249 MAX4257 General Description The MAX4249 MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and singlesupply operation down to 2.4V. They
More informationSGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
PRODUCT DESCRIPTION The SGM863 (single), SGM863 (dual), SGM8633 (single with shutdown) and SGM8634 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide
More informationSCLK 4 CS 1. Maxim Integrated Products 1
19-172; Rev ; 4/ Dual, 8-Bit, Voltage-Output General Description The contains two 8-bit, buffered, voltage-output digital-to-analog converters (DAC A and DAC B) in a small 8-pin SOT23 package. Both DAC
More informationMaxim Integrated Products 1
19-248; Rev ; 4/1 Low-Cost, SC7, Voltage-Output, General Description The MAX473 low-cost, high-side current-sense amplifier features a voltage output that eliminates the need for gain-setting resistors
More informationMiniature, 300MHz, Single-Supply, Rail-to-Rail Op Amps with Enable MAX4212/MAX4213/MAX4216/MAX4218/MAX4220
9-7; Rev ; / EVALUATION KIT MANUAL AVAILABLE Miniature, MHz, Single-Supply, General Description The MAX/MAX single, MAX dual, MAX triple, and MAX quad op amps are unity-gain-stable devices that combine
More information2.5V Video Amplifier with Reconstruction Filter
19-3674; Rev ; 5/5 2.5V Video Amplifier with Reconstruction Filter General Description The small, low-power video amplifier with integrated reconstruction filter operates from a supply voltage as low as
More informationLow-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output
19-1548; Rev 3; 12/5 Low-Cost, UCSP/SOT23, Micropower, High-Side General Description The MAX4372 low-cost, precision, high-side currentsense amplifier is available in a tiny, space-saving SOT23-5-pin package.
More informationDual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
More information40ns, Low-Power, 3V/5V, Rail-to-Rail Single-Supply Comparators MAX9140/MAX9141/ MAX9142/MAX9144
General Description The MAX914/MAX9141 are single and the MAX914/ MAX9144 are dual/quad high-speed comparators optimized for systems powered from a 3V or 5V supply. The MAX9141 features latch enable and
More informationLow-Power Single/Dual, Rail-to-Rail Op Amps
19-532; Rev ; 8/1 Low-Power Single/Dual, Rail-to-Rail Op Amps General Description The are low-power precision op amps that feature precision MOS inputs. These devices are ideal for a large number of signal
More informationPrecision Uni-/Bidirectional, Current-Sense Amplifiers
/MAX9919/MAX992 General Description The /MAX9919/MAX992 are single-supply, high-accuracy current-sense amplifiers with a high input common-mode range that extends from -2V to +75V. These amplifiers are
More informationLow IBIAS, +1.4V/800nA, Rail-to-Rail Op Amps with +1.2V Buffered Reference
19-3142; Rev 5; 11/9 Low IBIAS, +1.4V/8nA, Rail-to-Rail Op Amps General Description The single MAX436/MAX437 and dual MAX438/ MAX439 operational amplifiers operate from a single +1.4V to +3.6V (without
More information60V High-Speed Precision Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX9643 General Description The MAX9643 is a high-speed 6V precision unidirectional current-sense amplifier ideal for a wide variety of power-supply control applications. Its high
More informationMIC915. Features. General Description. Applications. Ordering Information. Pin Configuration. Pin Description. Dual 135MHz Low-Power Op Amp
MIC915 Dual 135MHz Low-Power Op Amp General Description The MIC915 is a high-speed, unity-gain stable operational amplifier. It provides a gain-bandwidth product of 135MHz with a very low, 2.4mA supply
More informationHigh-Output-Drive, Precision, Low-Power, Single- Supply, Rail-to-Rail I/O Op Amps with Shutdown
9-4; Rev 3; /7 High-Output-Drive, Precision, Low-Power, Single- General Description The MAX465 MAX469 family of operational amplifiers combines excellent DC accuracy with high output current drive, single-supply
More informationLow-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs
9-; Rev ; / Low-Cost, High-Speed, Single-Supply General Description The MAX single, MAX dual, MAX triple, and MAX quad op amps are unity-gain-stable devices that combine high-speed performance with Railto-Rail
More informationSOT23, Low-Noise, Low-Distortion, Wide-Band, Rail-to-Rail Op Amps
9-237; Rev 3; 9/ SOT23, Low-Noise, Low-Distortion, Wide-Band, General Description The wideband, low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down
More information-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP
19-1434; Rev 1; 5/99 Low-Cost, SOT23, Voltage-Output, General Description The MAX4173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage
More information-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1
19-13; Rev 2; 9/ Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output
More information150mA, Low-Dropout Linear Regulator with Power-OK Output
9-576; Rev ; /99 5mA, Low-Dropout Linear Regulator General Description The low-dropout (LDO) linear regulator operates from a +2.5V to +6.5V input voltage range and delivers up to 5mA. It uses a P-channel
More information-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1
19-13; Rev 3; 12/ Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output
More informationMAX9918/MAX9919/MAX9920
19-515; Rev 4; 7/11 EVALUATION KIT AVAILABLE -2V to +75V Input Range, Precision General Description The /MAX9919/MAX992 are single-supply, high-accuracy current-sense amplifiers with a high input common-mode
More informationPrecision, Micropower, 1.8V Supply, Low-Dropout, SOT23 Voltage Reference
19-2211; Rev 2; 12/2 Precision, Micropower, 1.8V Supply, General Description The is a precision, low-voltage, low-dropout, micropower voltage reference in a SOT23 package. This three-terminal reference
More informationMAX4475 MAX4478/ MAX4488/MAX4489. SOT23, Low-Noise, Low-Distortion, Wide-Band, Rail-to-Rail Op Amps
Click here for production status of specific part numbers. MAX7 MAX78/ General Description The MAX7 MAX78/ wideband, low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply
More informationLow-Power, Precision, 4-Bump WLP, Current-Sense Amplifier
EVALUATION KIT AVAILABLE General Description The is a zero-drift, high-side current-sense amplifier family that offers precision, low supply current and is available in a tiny 4-bump ultra-thin WLP of
More information0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
More informationUltra-Small, Low-Cost, 85MHz Op Amps with Rail-to-Rail Outputs and Disable
9-3; Rev 4; /9 Ultra-Small, Low-Cost, 85MHz Op Amps with General Description The MAX4389/MAX439/MAX439 MAX4396 family of op amps are unity-gain stable devices that combine high-speed performance, rail-to-rail
More informationSGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier
PRODUCT DESCRIPTION The is a low cost, single rail-to-rail input and output voltage feedback amplifier. It has a wide input common mode voltage range and output voltage swing, and takes the minimum operating
More informationNot Recommended for New Designs
Not Recommended for New Designs The MAX9 was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. A Maxim replacement or
More informationMicropower Precision CMOS Operational Amplifier AD8500
Micropower Precision CMOS Operational Amplifier AD85 FEATURES Supply current: μa maximum Offset voltage: mv maximum Single-supply or dual-supply operation Rail-to-rail input and output No phase reversal
More informationPrecision, Micropower, Low-Dropout, SC70 Series Voltage Reference
19-2428; Rev ; 4/2 Precision, Micropower, Low-Dropout, SC7 General Description The family of precision, low-dropout, micropower voltage references are available in the miniature 3-pin SC7 surface-mount
More informationSingle/Dual/Quad High-Speed, Ultra Low-Power, Single-Supply TTL Comparators
19-129; Rev. 3; 7/94 Single/Dual/Quad High-Speed, Ultra Low-Power, General Description The MAX97/MAX98/MAX99 dual, quad, and single high-speed, ultra low-power voltage comparators are designed for use
More informationSingle/Dual/Quad, Micropower, Ultra-Low-Voltage, Rail-to-Rail I/O Comparators
9-; Rev ; / Single/Dual/Quad, Micropower, General Description The MAX9 MAX9 single/dual/quad micropower comparators feature rail-to-rail inputs and outputs, and fully specified single-supply operation
More informationMAX V, 50MHz, Low-Offset, Low-Power, Rail-to-Rail I/O Op Amp
EVALUATION KIT AVAILABLE MAX4428 1.8V, 5MHz, Low-Offset, General Description The MAX4428 offers a unique combination of high speed, precision, low noise, and low-voltage operation making it ideally suited
More informationPrecision, Micropower, Low-Dropout Voltage References MAX6190 MAX6195/MAX6198
19-108; Rev 3; /10 Precision, Micropower, General Description The precision, micropower, low-dropout voltage references offer high initial accuracy and very low temperature coefficient through a proprietary
More informationLow-Cost, SOT23, Voltage-Output, High-Side Current-Sense Amplifier MAX4173T/F/H
19-13; Rev 5; /11 Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output
More informationLow-Power, Low-Drift, +2.5V/+5V/+10V Precision Voltage References
19-38; Rev 3; 6/7 Low-Power, Low-Drift, +2.5V/+5V/+1V General Description The precision 2.5V, 5V, and 1V references offer excellent accuracy and very low power consumption. Extremely low temperature drift
More informationDual-Channel, High-Precision, High-Voltage, Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX44285 General Description The MAX44285 dual-channel high-side current-sense amplifier has precision accuracy specifications of V OS less than 12μV (max) and gain error less
More informationMCP6041/2/3/ na, Rail-to-Rail Input/Output Op Amps. Features. Description. Applications. Design Aids. Package Types.
600 na, Rail-to-Rail Input/Output Op Amps Features Low Quiescent Current: 600 na/amplifier Rail-to-Rail Input/Output Gain Bandwidth Product: 14 khz Wide Supply Voltage Range: 1.4V to 6.0V Unity Gain Stable
More information10-Bit, Low-Power, Rail-to-Rail Voltage-Output Serial DAC in SOT23
19-195; Rev 1; 1/4 1-Bit, Low-Power, Rail-to-Rail General Description The is a small footprint, low-power, 1-bit digital-to-analog converter (DAC) that operates from a single +.7V to +5.5V supply. The
More informationHigh-Accuracy, 76V, High-Side Current Monitors in SOT23 MAX4007/MAX4008. Features
19-2743; Rev 3; 4/07 High-Accuracy, 76V, High-Side General Description The precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications.
More information256-Tap SOT-PoT, Low-Drift Digital Potentiometers in SOT23
19-1848; Rev ; 1/ 256-Tap SOT-PoT, General Description The MAX54/MAX541 digital potentiometers offer 256-tap SOT-PoT digitally controlled variable resistors in tiny 8-pin SOT23 packages. Each device functions
More information17µA Max, Dual/Quad, Single-Supply, Precision Op Amps
19-127; Rev. 1; 11/98 General Description The MAX478 and MAX479 are dual and quad micropower, precision op amps available in 8-pin and 14-pin DIP and small-outline packages, respectively. Both devices
More informationLow-Power, High-Efficiency, Single/Dual, Rail-to-Rail I/O Op Amps
19-5338; Rev ; 8/1 Low-Power, High-Efficiency, General Description The are low-power precision op amps with rail-to-rail inputs and rail-to-rail outputs. They feature precision MOS inputs powered from
More informationUltra-Small, Ultra-Thin, 4-Bump Op Amp
EVALUATION KIT AVAILABLE MAX4428 General Description The MAX4428 is the industry s first op amp in a 4-bump WLP package, designed for use in portable consumer and medical applications. This device is offered
More informationDual, Low-Noise, Low-Dropout, 160mA Linear Regulators in SOT23
19-1818; Rev 1; 1/1 Dual, Low-Noise, Low-Dropout, 16mA Linear General Description The dual, low-noise, low-dropout linear regulators operate from a +2.5V to +6.5V input and deliver up to 16mA each of continuous
More informationMCP6031/2/3/ µa, High Precision Op Amps. Features. Description. Applications. Design Aids. Package Types. Typical Application
0.9 µa, High Precision Op Amps Features Rail-to-Rail Input and Output Low Offset Voltage: ±150 µv (maximum) Ultra Low Quiescent Current: 0.9 µa Wide Power Supply Voltage: 1.8V to 5.5V Gain Bandwidth Product:
More informationLow-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output
AVAILABLE General Description The MAX4372 low-cost, precision, high-side currentsense amplifier is available in a tiny, space-saving SOT23-5-pin package. Offered in three gain versions (T = 2V/V, F = 5V/V,
More information500mA Low-Dropout Linear Regulator in UCSP
19-272; Rev ; 1/2 5mA Low-Dropout Linear Regulator in UCSP General Description The low-dropout linear regulator operates from a 2.5V to 5.5V supply and delivers a guaranteed 5mA load current with low 12mV
More information+2.7V to +5.5V, Low-Power, Dual, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
9-565; Rev ; /99 +.7 to +5.5, Low-Power, Dual, Parallel General Description The MAX5 parallel-input, voltage-output, dual 8-bit digital-to-analog converter (DAC) operates from a single +.7 to +5.5 supply
More informationPA RT MAX3408EUK 100Ω 120Ω. Maxim Integrated Products 1
19-2141; Rev ; 8/1 75Ω/Ω/Ω Switchable Termination General Description The MAX346/MAX347/MAX348 are general-purpose line-terminating networks designed to change the termination value of a line, depending
More informationPrecision, Low-Power, 6-Pin SOT23 Temperature Sensors and Voltage References
19-2457; Rev 2; 11/03 Precision, Low-Power, 6-Pin SOT23 General Description The are precise, low-power analog temperature sensors combined with a precision voltage reference. They are ideal for applications
More informationMAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch
General Description The quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range
More informationMAX44259/MAX44260/MAX44261/MAX V, 15MHz Low-Offset, Low-Power, Rail-to-Rail I/O Op Amps
EVALUATION KIT AVAILABLE MAX44259/MAX4426/MAX44261/MAX44263 General Description The MAX44259/MAX4426/MAX44261/MAX44263 offer a unique combination of high speed, precision, low noise, and low-voltage operation
More information