-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1
|
|
- Lindsey Maxwell
- 5 years ago
- Views:
Transcription
1 19-13; Rev 3; 12/ Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output that eliminates the need for gain-setting resistors and it is ideal for today s notebook computers, cell phones, and other systems where current monitoring is critical. High-side current monitoring is especially useful in battery-powered systems, since it does not interfere with the ground path of the battery charger. The input common-mode range of to +28V is independent of the supply voltage and ensures that the current-sense feedback remains viable even when connected to a battery in deep discharge. The MAX173 s wide 1.7MHz bandwidth makes it suitable for use inside battery charger control loops. The combination of three gain versions and a userselectable external sense resistor sets the full-scale current reading. This feature offers a high level of integration, resulting in a simple and compact currentsense solution. The MAX173 operates from a single +3V to +28V supply, typically draws only 2µA of supply current over the extended operating temperature range (- C to +85 C), and is offered in the space-saving SOT23-6 package. Applications Notebook Computers Portable/Battery-Powered Systems Smart Battery Packs/Chargers Cell Phones Power-Management Systems General System/Board-Level Current Monitoring PA Bias Control Precision Current Sources Features Low-Cost, Compact Current-Sense Solution Wide to +28V Common-Mode Range Independent of Supply Voltage Three Gain Versions Available +2V/V () +5V/V () +1V/V () ±.5% Full-Scale Accuracy ±.3mV Input Offset Voltage () 2µA Supply Current Wide 1.7MHz Bandwidth () +3V to +28V Operating Supply Available in Space-Saving SOT23-6 Package TO +28V VSENSE R SENSE +3V TO +28V RS+ RS-.1µF A/D CONVERTER Typical Operating Circuit /F/H I LOAD LOAD/ BATTERY /F/H Ordering Information PART EUT-T ESA GA (V/V) 2 2 TEMP RANGE - C to +85 C - C to +85 C P-PACKAGE 6 SOT SO SOT TOP MARK AABN EUT-T 5 - C to +85 C 6 SOT23-6 AABO ESA 5 - C to +85 C 8 SO EUT-T 1 - C to +85 C 6 SOT23-6 AABP ESA 1 - C to +85 C 8 SO Pin Configurations appear at end of data sheet. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at , or visit Maxim s website at
2 /F/H ABSOLUTE MAXIMUM RATGS, RS+, RS- to V to +3V to V to ( +.3V) Output Short-Circuit to or... Continuous Differential Input Voltage (V RS+ - V RS- )... ±.3V Current into Any Pin... ±2mA Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS Continuous Power Dissipation (T A = +7 C) 8-Pin SO (derate 5.88mW/ C above +7 C)... 71mW SOT23-6 (derate 8.7mW/ C above +7 C) mW Operating Temperature Range... - C to +85 C Storage Temperature Range C to +15 C Lead Temperature (soldering, 1s) C (V RS+ = to +28V, = +3V to +28V, V SENSE = V, T A = T M to T MAX, R LOAD = unless otherwise noted. Typical values are at T A = +25 C.) (Note 1) PARAMETER SYMBOL CONDITIONS M TYP MAX UNITS Operating Voltage Range Guaranteed by PSR test 3 28 V Common-Mode Input Range V CMR (Note 2) 28 V Common-Mode Rejection CMR V RS+ > +2.V 9 db Supply Current I CC V RS+ > +2.V, > 12V.2 1. ma Leakage Current I RS+, I RS- =.3 3 µa Input Bias Current V RS+ > +2.V 5 I RS+ V RS+ +2.V V RS+ > +2.V 1 I RS- V RS+ +2.V -7 1 µa Full-Scale Sense Voltage V SENSE V SENSE = V RS+ - V RS- 15 mv Total Voltage Error (Note 3) V SENSE = +1mV, = +12V, V RS+ = +12V ± V SENSE = +1mV, = +12V, V RS+ = +12V, T A = +25 C V SENSE = +1mV, = +28V, V RS+ = +28V V SENSE = +1mV, = +12V, V RS+ = +.1V -9 ±2 = +12V, V RS+ = +12V, V SENSE = +6.25mV (Note ) ±7.5, = +3.V Out High Voltage (Note 5) ( - V OH ), = +7.5V.8 1.2, = +15V Low Voltage V OL = +5V, V RS+ =.89V, EUT, T A = +25 C V SENSE = mv T A = - C to +85 C % V mv 2
3 ELECTRICAL CHARACTERISTICS (continued) (V RS+ = to +28V, = +3V to +28V, V SENSE = V, T A = T M to T MAX, R LOAD = unless otherwise noted. Typical values are at T A = +25 C.) (Note 1) Bandwidth PARAMETER SYMBOL CONDITIONS M TYP MAX UNITS BW V RS+ = +12V, = +12V, C LOAD = 5pF, V SENSE = +1mV, V SENSE = +1mV, V SENSE = +1mV V SENSE = +6.25mV (Note ) 2 Gain A V MHz V/V /F/H /F V SENSE = T A = +25 C.5 ±2.5 +1mV to +15mV, = V RS+ = 12V T A = - C to +85 C. V V SENSE = T A = +25 C.5 ±2.5 +1mV to +1mV, = V RS+ = 12V T A = - C to +85 C. Input Offset Voltage (Note 6) Settling Time to 1% of Final Value V OS EUT = +12V, V RS+ = 12V, C LOAD = 5pF T A = +25 C.3 ±3 T A = - C to +85 C ±5 V SENSE = +6.25mV to +1mV V SENSE = +1mV to +6.25mV Output Resistance R 12 kω Power-Supply Rejection Power-Up Time to 1% of Final Value PSR, V SENSE = 8mV, V RS+ +2V 6 8 Note 1: All devices are 1% production tested at T A = +25 C. All temperature limits are guaranteed by design. Note 2: Guaranteed by Total Output Voltage Error Test. Note 3: Total Voltage Error is the sum of gain and offset voltage errors. Note : +6.25mV = 1/16 of +1mV full-scale voltage. Note 5: V SENSE such that output stage is in saturation. Note 6: V OS is extrapolated from the Gain Accuracy tests. Note 7: The device does not experience phase reversal when overdriven. 8, V SENSE = 32mV, V RS+ +2V 6 91, V SENSE = 16mV, V RS+ +2V 6 95 V SENSE = +1mV, C LOAD = 5pF 1 µs Saturation Recovery Time = +12V, V RS+ = 12V (Note 7) 1 µs % mv ns db 3
4 /F/H Typical Operating Characteristics ( = +12V, V RS+ = +12V, V SENSE = +1mV, T A = +25 C, unless otherwise noted.) SUPPLY CURRENT (µa) SUPPLY CURRENT vs. SUPPLY VOLTAGE MAX173 TOC1 SUPPLY CURRENT (µa) SUPPLY CURRENT vs. TEMPERATURE MAX173 toc2 SUPPLY CURRENT (ma) SUPPLY CURRENT vs. RS+ VOLTAGE MAX173 toc SUPPLY VOLTAGE (V) TEMPERATURE ( C) V RS+ (V) TOTAL PUT ERROR (%) TOTAL PUT ERROR vs. SUPPLY VOLTAGE V SENSE = 1mV SUPPLY VOLTAGE (V) MAX173 toc TOTAL PUT ERROR (%) TOTAL PUT ERROR vs. SUPPLY VOLTAGE V SENSE = 6.25mV SUPPLY VOLTAGE (V) MAX173 toc5 TOTAL PUT ERROR (%) TOTAL PUT ERROR vs. FULL-SCALE SENSE VOLTAGE = 28V V SENSE (mv) MAX173 toc6 PSR (db) POWER-SUPPLY REJECTION vs. FREQUENCY MAX173 toc7 TOTAL PUT ERROR (%) TOTAL PUT ERROR vs. COMMON-MODE VOLTAGE MAX173 toc8 GA ACCURACY (%) GA ACCURACY vs. TEMPERATURE MAX173 toc k 1k 1k 1M 1M FREQUENCY (Hz) COMMON-MODE VOLTAGE (V) TEMPERATURE ( C)
5 ( = +12V, V RS+ = +12V, V SENSE = +1mV, T A = +25 C, unless otherwise noted.) TOTAL PUT ERROR (%) TOTAL PUT ERROR vs. TEMPERATURE Typical Operating Characteristics (continued) MAX173 toc1 (5mV/div) (5mV/div) LARGE-SIGNAL TRANSIENT RESPONSE (V SENSE = 6mV to 1mV) MAX173 toc11 1mV 6mV 2V /F/H V TEMPERATURE ( C) LARGE-SIGNAL TRANSIENT RESPONSE (V SENSE = 6mV to 1mV) LARGE-SIGNAL TRANSIENT RESPONSE (V SENSE = 6mV to 1mV) MAX173 toc12 1mV MAX173 toc13 1mV (5mV/div) 6mV (5mV/div) 6mV 1V (2V/div) 5V.3V (3V/div).6V SMALL-SIGNAL TRANSIENT RESPONSE (V SENSE = 95mV TO 1mV) SMALL-SIGNAL TRANSIENT RESPONSE (V SENSE = 95mV TO 1mV) (5mV/div) MAX173 toc1 1mV 95mV (5mV/div) MAX173 toc16 1mV 95mV (5mV/div) 2.V 1.9V (1mV/div) 5V.75V 5
6 /F/H ( = +12V, V RS+ = +12V, V SENSE = +1mV, T A = +25 C, unless otherwise noted.) (5mV/div) (2mV/div) SMALL-SIGNAL TRANSIENT RESPONSE (V SENSE = 95mV to 1mV) MAX173 toc15 Typical Operating Characteristics (continued) 1mV 95mV 1V 9.5V (2V/div) (1V/div) START-UP DELAY ( = to V) (V SENSE = 1mV) MAX173 toc17 V V 2V V 5µs/div Pin Description SOT23-6 P SO NAME FUNCTION 1, Ground 1 Supply Voltage Input. Bypass to with a.1µf capacitor. 8 RS+ Power-Side Connection to the External Sense Resistor 6 RS- Load-Side Connection for the External Sense Resistor 6 Voltage Output. V is proportional to V SENSE ( V RS+ - V RS- ). Output impedance is approximately 12kΩ. 2, 5, 7 N.C. No Connection. Not internally connected. 6
7 Detailed Description The MAX173 high-side current-sense amplifier features a to +28V input common-mode range that is independent of supply voltage. This feature allows the monitoring of current out of a battery in deep discharge and also enables high-side current sensing at voltages greater than the supply voltage ( ). The MAX173 operates as follows: Current from the source flows through R SENSE to the load (Figure 1). Since the internal-sense amplifier s inverting input has high impedance, negligible current flows through RG2 (neglecting the input bias current). Therefore, the sense amplifier s inverting-input voltage equals VSOURCE - (ILOAD)(RSENSE). The amplifier s open-loop gain forces its noninverting input to the same voltage as the inverting input. Therefore, the drop across RG1 equals (ILOAD)(R SENSE ). Since I RG1 flows through RG1, I RG1 = (I LOAD )(R SENSE ) / RG1. The internal current mirror multiplies IRG1 by a current gain factor, β, to give IRGD = β I RG1. Solving I RGD = β (I LOAD )(R SENSE ) / RG1. Assuming infinite output impedance, V = (IRGD) (RGD). Substituting in for I RGD and rearranging, V = β (RGD / RG1)(R SENSE I LOAD ). The parts gain equals β RGD / RG1. Therefore, V = (GA) (RSENSE) (ILOAD), where GA = 2 for, GA = 5 for, and GA = 1 for. V SOURCE TO +28V +3V TO +28V I RG1 RS+ R G1 CURRENT MIRROR R SENSE RGD = 12k Figure 1. Functional Diagram A1 MAX173 I RGD I LOAD RS- R G2 TO LOAD BATTERY V Set the full-scale output range by selecting R SENSE and the appropriate gain version of the MAX173. Applications Information Recommended Component Values The MAX173 senses a wide variety of currents with different sense resistor values. Table 1 lists common resistor values for typical operation of the MAX173. Choosing RSENSE To measure lower currents more accurately, use a high value for R SENSE. The high value develops a higher sense voltage that reduces offset voltage errors of the internal op amp. In applications monitoring very high currents, R SENSE must be able to dissipate the I 2 R losses. If the resistor s rated power dissipation is exceeded, its value may drift or it may fail altogether, causing a differential voltage across the terminals in excess of the absolute maximum ratings. If I SENSE has a large high-frequency component, minimize the inductance of R SENSE. Wire-wound resistors have the highest inductance, metal-film resistors are somewhat better, and low-inductance metal-film resistors are best suited for these applications. Using a PCB Trace as RSENSE If the cost of RSENSE is an issue and accuracy is not critical, use the alternative solution shown in Figure 2. This solution uses copper PC board traces to create a sense resistor. The resistivity of a.1-inch-wide trace of 2-ounce copper is approximately 3mΩ/ft. The resistance-temperature coefficient of copper is fairly high (approximately.%/ C), so systems that experience a wide temperature variance must compensate for this effect. In addition, do not exceed the maximum power dissipation of the copper trace. For example, the (with a maximum load current of 1A and an RSENSE of 5mΩ) creates a full-scale VSENSE of 5mV that yields a maximum V of 1V. R SENSE in this case requires about 2 inches of.1 inchwide copper trace. Output Impedance The output of the MAX173 is a current source driving a 12kΩ resistance. Resistive loading added to reduces the output gain of the MAX173. To minimize output errors for most applications, connect to a high-impedance input stage. When output buffering is required, choose an op amp with a common-mode input range and an output voltage swing that includes ground when operating with a single supply. The op /F/H 7
8 /F/H Table 1. Recommended Component Values FULL-SCALE LOAD CURRENT I LOAD (A).1 CURRENT-SENSE RESISTOR R SENSE (mω) GA FULL-SCALE PUT VOLTAGE (FULL-SCALE V SENSE = 1mV) V (V) PUT.3 in. COPPER + R SENSE.1 in. COPPER V SENSE _ LOAD/BATTERY.3 in. COPPER V LOW-COST SWITCHG REGULATOR TO +28V V SENSE R SENSE I LOAD RS+ +3V TO +28V.1µF +3V TO +28V.1µF RS+ RS- RS- MAX173 LOAD/ BATTERY Figure 2. MAX173 Connections Showing Use of PC Board Figure 3. Current Source amp s supply voltage range should be at least as high as any voltage the system may encounter. The percent error introduced by output loading is determined with the following formula: R % ERROR = 1 LOAD 12k Ω + RLOAD 1 Current Source Circuit Figure 3 shows a block diagram using the MAX173 with a switching regulator to make a current source. where RLOAD is the external load applied to. 8
9 TOP VIEW 1 6 MAX RS- 3 RS+ SOT23-6 N.C Pin Configurations 8 RS+ MAX173 7 N.C. 6 5 RS- N.C. SO /F/H TRANSISTOR COUNT: 187 Chip Information 9
10 /F/H Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to 6LSOT.EPS 1
11 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to N E H CHES MILLIMETERS DIM M MAX M MAX A A B C e.5 BSC 1.27 BSC E H L SOICN.EPS /F/H 1 TOP VIEW VARIATIONS: DIM D D D CHES MILLIMETERS M MAX M MAX N MS AA AB AC D A C e B A1 FRONT VIEW L SIDE VIEW -8 PROPRIETARY FORMATION TITLE: PACKAGE LE,.15" SOIC APPROVAL DOCUMENT CONTROL NO. REV B 1 1 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 12 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1
19-13; Rev 2; 9/ Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output
More information-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP
19-1434; Rev 1; 5/99 Low-Cost, SOT23, Voltage-Output, General Description The MAX4173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage
More informationLow-Cost, SOT23, Voltage-Output, High-Side Current-Sense Amplifier MAX4173T/F/H
19-13; Rev 5; /11 Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output
More informationMAX4173. Low-Cost, SOT23, Voltage-Output, High-Side Current-Sense Amplifier
AVAILABLE MAX173 General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output that eliminates the need for gain-setting
More informationMaxim Integrated Products 1
19-248; Rev ; 4/1 Low-Cost, SC7, Voltage-Output, General Description The MAX473 low-cost, high-side current-sense amplifier features a voltage output that eliminates the need for gain-setting resistors
More informationLow-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output
19-1548; Rev 3; 12/5 Low-Cost, UCSP/SOT23, Micropower, High-Side General Description The MAX4372 low-cost, precision, high-side currentsense amplifier is available in a tiny, space-saving SOT23-5-pin package.
More informationLow-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output
AVAILABLE General Description The MAX4372 low-cost, precision, high-side currentsense amplifier is available in a tiny, space-saving SOT23-5-pin package. Offered in three gain versions (T = 2V/V, F = 5V/V,
More information76V, High-Side, Current-Sense Amplifiers with Voltage Output
9-2562; Rev ; /2 76V, High-Side, Current-Sense Amplifiers with General Description The are high-side, current-sense amplifiers with an input voltage range that extends from 4.5V to 76V making them ideal
More informationLow-Cost, Precision, High-Side Current-Sense Amplifier MAX4172. Features
19-1184; Rev 0; 12/96 Low-Cost, Precision, High-Side General Description The is a low-cost, precision, high-side currentsense amplifier for portable PCs, telephones, and other systems where battery/dc
More informationLow-Cost, Micropower, High-Side Current-Sense Amplifier + Comparator + Reference ICs
9-63; Rev ; /3 Low-Cost, Micropower, High-Side Current-Sense General Description The low-cost, micropower, high-side current-sense supervisors contain a highside current-sense amplifier, bandgap reference,
More informationLow-Cost, Precision, High-Side Current-Sense Amplifier MAX4172
General Description The MAX472 is a low-cost, precision, high-side currentsense amplifier for portable PCs, telephones, and other systems where battery/dc power-line monitoring is critical. High-side power-line
More information1.0V Micropower, SOT23, Operational Amplifier
19-3; Rev ; 1/ 1.V Micropower, SOT3, Operational Amplifier General Description The micropower, operational amplifier is optimized for ultra-low supply voltage operation. The amplifier consumes only 9µA
More information76V, High-Side, Current-Sense Amplifiers with Voltage Output
EVALUATION KIT AVAILABLE MAX48/MAX481 General Description The MAX48/MAX481 are high-side, current-sense amplifiers with an input voltage range that extends from 4.5V to 76V making them ideal for telecom,
More informationLow-Power, Low-Drift, +2.5V/+5V/+10V Precision Voltage References
19-38; Rev 3; 6/7 Low-Power, Low-Drift, +2.5V/+5V/+1V General Description The precision 2.5V, 5V, and 1V references offer excellent accuracy and very low power consumption. Extremely low temperature drift
More informationSingle-Supply, 150MHz, 16-Bit Accurate, Ultra-Low Distortion Op Amps
9-; Rev ; /8 Single-Supply, 5MHz, 6-Bit Accurate, General Description The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 6- bit settling time in 3ns, and
More information350MHz, Ultra-Low-Noise Op Amps
9-442; Rev ; /95 EVALUATION KIT AVAILABLE 35MHz, Ultra-Low-Noise Op Amps General Description The / op amps combine high-speed performance with ultra-low-noise performance. The is compensated for closed-loop
More informationRail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
19-579; Rev ; 12/1 EVALUATION KIT AVAILABLE Rail-to-Rail, 2kHz Op Amp General Description The op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationEVALUATION KIT AVAILABLE 1µA, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier
19-521; Rev 2; 8/1 EVALUATION KIT AVAILABLE 1µA, 4-Bump UCSP/SOT23, General Description The high-side current-sense amplifier offers precision accuracy specifications of V OS less than 25µV (max) and gain
More information-0.1V to +28V Input Range, Micropower, Uni-/Bidirectional, Current-Sense Amplifiers
EVALUATION KIT AVAILABLE MAX9928/MAX9929 -.1V to +28V Input Range, Micropower, General Description The MAX9928/MAX9929 low-cost, uni-/bidirectional, high-side, current-sense amplifiers are ideal for monitoring
More information6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable
99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using
More informationUltra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs
9-5; Rev 4; /9 Ultra-Small, Low-Cost, MHz, Single-Supply General Description The MAX445 single and MAX445 dual op amps are unity-gain-stable devices that combine high-speed performance with rail-to-rail
More informationDual-Channel, High-Precision, High-Voltage, Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX44285 General Description The MAX44285 dual-channel high-side current-sense amplifier has precision accuracy specifications of V OS less than 12μV (max) and gain error less
More informationMicropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197
General Description The is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail single-supply operation, outstanding precision specifications, and a high gain bandwidth. This
More informationEVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp
19-227; Rev ; 9/1 EVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp General Description The op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device
More informationPART. Note: All devices are specified over the -40 C to +125 C operating PART. Maxim Integrated Products 1
9-2424; Rev 2; 5/6 Ultra-Low Offset/Drift, Low-Noise, General Description The are low-noise, low-drift, ultrahigh precision amplifiers that offer near-zero DC offset and drift through the use of autocorrelating
More informationBidirectional, High-Side, Current-Sense Amplifiers with Reference
9-2423; Rev 2; /3 Bidirectional, High-Side, Current-Sense General Description The low-cost, bidirectional, highside, current-sense amplifiers are ideal for monitoring battery charge and discharge currents
More informationNot Recommended for New Designs
Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains
More informationPrecision, High-Bandwidth Op Amp
EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage
More informationMAX471CSA. I LOAD TO LOAD or CHARGER LOGIC SUPPLY DISCHARGE/CHARGE
19-; Rev 2; 12/96 Precision, High-Side General Description The / are complete, bidirectional, highside current-sense amplifiers for portable PCs, telephones, and other systems where battery/dc power-line
More information300MHz, Low-Power, High-Output-Current, Differential Line Driver
9-; Rev ; /9 EVALUATION KIT AVAILABLE 3MHz, Low-Power, General Description The differential line driver offers high-speed performance while consuming only mw of power. Its amplifier has fully symmetrical
More informationTOP VIEW. Maxim Integrated Products 1
19-295; Rev ; 8/1 High-Current VCOM Drive Buffer General Description The is a high-current operational transconductance amplifier. The is ideal for driving the backplane of an active matrix, dot inversion
More informationLow-Cost, 230MHz, Single/Quad Op Amps with Rail-to-Rail Outputs and ±15kV ESD Protection OUT
9-4; Rev ; 9/5 Low-Cost, 3MHz, Single/Quad Op Amps with General Description The op amps are unity-gain stable devices that combine high-speed performance, rail-to-rail outputs, and ±5kV ESD protection.
More informationIF Digitally Controlled Variable-Gain Amplifier
19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The
More informationLow-Power, Precision, 4-Bump WLP, Current-Sense Amplifier
EVALUATION KIT AVAILABLE General Description The is a zero-drift, high-side current-sense amplifier family that offers precision, low supply current and is available in a tiny 4-bump ultra-thin WLP of
More informationTOP VIEW. Maxim Integrated Products 1
9-987; Rev ; 9/3 5MHz, Triple, -Channel Video General Description The is a triple, wideband, -channel, noninverting gain-of-two video amplifier with input multiplexing, capable of driving up to two back-terminated
More informationSingle/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps
9-; Rev 4; 7/ Single/Dual/Quad, +.8V/75nA, SC7, General Description The MAX4464/MAX447/MAX447/MAX447/MAX4474 family of micropower op amps operate from a single +.8V to +5.5V supply and draw only 75nA of
More information2.5V Video Amplifier with Reconstruction Filter
19-3674; Rev ; 5/5 2.5V Video Amplifier with Reconstruction Filter General Description The small, low-power video amplifier with integrated reconstruction filter operates from a supply voltage as low as
More informationPART. Maxim Integrated Products 1
- + 9-; Rev ; / Low-Cost, High-Slew-Rate, Rail-to-Rail I/O Op Amps in SC7 General Description The MAX9/MAX9/MAX9 single/dual/quad, low-cost CMOS op amps feature Rail-to-Rail input and output capability
More informationPARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Operating Voltage Range. MAX4069/MAX4071/MAX4072 (Note 4) V CC (Note 3)
AVAILABLE MAX469 MAX472 General Description The MAX469 MAX472 low-cost, bidirectional, highside, current-sense amplifiers are ideal for monitoring battery charge and discharge currents in notebooks, cell
More information400MHz, Ultra-Low-Distortion Op Amps
9; Rev ; /97 EVALUATION KIT AVAILABLE MHz, Ultra-Low-Distortion Op Amps General Description The MAX8/MAX9/MAX8/MAX9 op amps combine ultra-high-speed performance with ultra-lowdistortion operation. The
More informationHigh-Efficiency, 26V Step-Up Converters for Two to Six White LEDs
19-2731; Rev 1; 10/03 EVALUATION KIT AVAILABLE High-Efficiency, 26V Step-Up Converters General Description The step-up converters drive up to six white LEDs with a constant current to provide backlight
More information60V High-Speed Precision Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX9643 General Description The MAX9643 is a high-speed 6V precision unidirectional current-sense amplifier ideal for a wide variety of power-supply control applications. Its high
More information1-Input/4-Output Video Distribution Amplifiers MAX4137/MAX4138
-00; Rev 0; / EVALUATION KIT AVAILABLE General Description The / are -input/-output voltagefeedback amplifiers that combine high speed with fast switching for video distribution applications. The is internally
More informationnanopower Op Amp in a Tiny 6-Bump WLP
EVALUATION KIT AVAILABLE MAX4464 General Description The MAX4464 is an ultra-small (6-bump WLP) op amp that draws only 75nA of supply current. It operates from a single +.8V to +5.5V supply and features
More informationPART MAX4144ESD MAX4146ESD. Typical Application Circuit. R t IN- IN+ TWISTED-PAIR-TO-COAX CABLE CONVERTER
9-47; Rev ; 9/9 EVALUATION KIT AVAILABLE General Description The / differential line receivers offer unparalleled high-speed performance. Utilizing a threeop-amp instrumentation amplifier architecture,
More informationReceiver for Optical Distance Measurement
19-47; Rev ; 7/9 EVALUATION KIT AVAILABLE Receiver for Optical Distance Measurement General Description The is a high-gain linear preamplifier for distance measurement applications using a laser beam.
More informationHigh-Accuracy, 76V, High-Side Current Monitors in SOT23 MAX4007/MAX4008. Features
19-2743; Rev 3; 4/07 High-Accuracy, 76V, High-Side General Description The precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications.
More informationHigh-Voltage, 350mA, Adjustable Linear High-Brightness LED (HB LED) Driver
19-383; Rev 1; 4/9 High-Voltage, 35mA, Adjustable Linear General Description The current regulator operates from a 6.5V to 4V input voltage range and delivers up to a total of 35mA to one or more strings
More informationN.C. OUT. Maxim Integrated Products 1
19-2892; Rev 2; 11/6 Ultra-Low-Power Precision Series General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
More informationLow-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs
9-824; Rev ; /5 Low-Cost, +3V/+5V, 62µA, 2MHz, General Description The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and / quad amplifiers combine high-speed performance with ultra-low power consumption.
More informationHigh-Precision, Low-Voltage, Micropower Op Amp MAX480. General Description. Features. Ordering Information. Applications.
9-77; Rev a; /98 High-Precision, Low-oltage, General Description The is a precision micropower operational amplifier with flexible power-supply capability. Its guaranteed µ maximum offset voltage (5µ typ)
More informationHigh-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators
9-266; Rev 2; /07 General Description The MAX987/MAX988/MAX99/MAX992/MAX995/ MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating
More informationHigh-Efficiency Step-Up Converters for White LED Main and Subdisplay Backlighting MAX1582/MAX1582Y
19-2783; Rev 2; 8/05 EVALUATION KIT AVAILABLE High-Efficiency Step-Up Converters General Description The drive up to six white LEDs in series with a constant current to provide display backlighting for
More informationSingle/Dual LVDS Line Receivers with In-Path Fail-Safe
9-2578; Rev 2; 6/07 Single/Dual LVDS Line Receivers with General Description The single/dual low-voltage differential signaling (LVDS) receivers are designed for high-speed applications requiring minimum
More informationPrecision, Micropower, 1.8V Supply, Low-Dropout, SOT23 Voltage Reference
19-2211; Rev 2; 12/2 Precision, Micropower, 1.8V Supply, General Description The is a precision, low-voltage, low-dropout, micropower voltage reference in a SOT23 package. This three-terminal reference
More informationnanopower, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX9634 General Description The MAX9634 high-side current-sense amplifier offers precision accuracy specifications of V OS less than 25μV (max) and gain error less than.5% (max).
More informationPrecision, Low-Power, 6-Pin SOT23 Temperature Sensors and Voltage References
19-2457; Rev 2; 11/03 Precision, Low-Power, 6-Pin SOT23 General Description The are precise, low-power analog temperature sensors combined with a precision voltage reference. They are ideal for applications
More informationV OUT. +Denotes lead(pb)-free/rohs-compliant package. PART
9-346; Rev 2; / 2kHz, 4µA, Rail-to-Rail General Description The single MAX99/MAX99 and dual MAX992/ MAX993 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current
More informationCurrent-Limited Switch for Two USB Ports
9-2385; Rev 2; /2 Current-Limited Switch for Two USB Ports General escription The MAX93 current-limited 7mΩ switch with built-in fault blanking provides an accurate, preset.2a to 2.3A current limit, making
More informationPrecision, Micropower, Low-Dropout Voltage References MAX6190 MAX6195/MAX6198
19-108; Rev 3; /10 Precision, Micropower, General Description The precision, micropower, low-dropout voltage references offer high initial accuracy and very low temperature coefficient through a proprietary
More information+2.7V to +5.5V, Low-Power, Triple, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
19-1560; Rev 1; 7/05 +2.7V to +5.5V, Low-Power, Triple, Parallel General Description The parallel-input, voltage-output, triple 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V
More informationV CC OUT MAX9945 IN+ V EE
19-4398; Rev ; 2/9 38V, Low-Noise, MOS-Input, General Description The operational amplifier features an excellent combination of low operating power and low input voltage noise. In addition, MOS inputs
More informationSC70/SOT23-8, 50mA IOUT, Rail-to-Rail I/O Op Amps with Shutdown/Mute
9-36; Rev ; 9/ SC7/SOT3-8, 5mA I, Rail-to-Rail I/O General Description The op amps deliver 4mW per channel into 3Ω from ultra-small SC7/SOT3 packages making them ideal for mono/stereo headphone drivers
More informationLow-Cost, Low-Power, Ultra-Small, 3V/5V, 500MHz Single-Supply Op Amps with Rail-to-Rail Outputs
9-83; Rev ; / Low-Cost, Low-Power, Ultra-Small, 3V/5V, 5MHz General Description The MAX442 single and MAX443 dual operational amplifiers are unity-gain-stable devices that combine high-speed performance,
More informationPART MAX1658C/D MAX1659C/D TOP VIEW
19-1263; Rev 0; 7/97 350mA, 16.5V Input, General Description The linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. They feature Dual Mode operation,
More informationLow-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
More informationLow-Voltage, 1.8kHz PWM Output Temperature Sensors
19-266; Rev 1; 1/3 Low-Voltage, 1.8kHz PWM Output Temperature General Description The are high-accuracy, low-power temperature sensors with a single-wire output. The convert the ambient temperature into
More information500mA Low-Dropout Linear Regulator in UCSP
19-272; Rev ; 1/2 5mA Low-Dropout Linear Regulator in UCSP General Description The low-dropout linear regulator operates from a 2.5V to 5.5V supply and delivers a guaranteed 5mA load current with low 12mV
More informationNot Recommended for New Designs
Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains
More informationPART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO
9-064; Rev ; /07 Low-Voltage, Dual-Supply, SPST, General Description The are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The is normally open (NO). The is normally
More informationV CC OUT MAX9945 IN+ V EE
19-4398; Rev 1; 12/ 38V, Low-Noise, MOS-Input, General Description The operational amplifier features an excellent combination of low operating power and low input voltage noise. In addition, MOS inputs
More informationLow-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs
9-; Rev ; / Low-Cost, High-Speed, Single-Supply General Description The MAX single, MAX dual, MAX triple, and MAX quad op amps are unity-gain-stable devices that combine high-speed performance with Railto-Rail
More informationSingle LVDS/Anything-to-LVPECL Translator
9-2808; Rev 0; 4/03 Single LVDS/Anything-to-LVPECL Translator General Description The is a fully differential, high-speed, anything-to-lvpecl translator designed for signal rates up to 2GHz. The s extremely
More informationNanopower Op Amp in Ultra-Tiny WLP and SOT23 Packages
EVALUATION KIT AVAILABLE MAX47 General Description The MAX47 is a single operational amplifier that provides a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationMAX4267EUA -40 C to +85 C 8 µmax. MAX4268EEE -40 C to +85 C 16 QSOP. MAX4270EEE -40 C to +85 C 16 QSOP
9; Rev ; 8/ Ultra-Low-Distortion, +V, MHz Op Amps with Disable General Description The MAX6 MAX7 ultra-low distortion, voltage-feedback op amps are capable of driving a Ω load while maintaining ultra-low
More informationI/O Op Amps with Shutdown
MHz, μa, Rail-to-Rail General Description The single MAX994/MAX995 and dual MAX996/ MAX997 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered
More informationHigh-Voltage, Low-Power Linear Regulators for
19-3495; Rev ; 11/4 High-oltage, Low-Power Linear Regulators for General Description The are micropower, 8-pin TDFN linear regulators that supply always-on, keep-alive power to CMOS RAM, real-time clocks
More informationImproved Second Source to the EL2020 ADEL2020
Improved Second Source to the EL ADEL FEATURES Ideal for Video Applications.% Differential Gain. Differential Phase. db Bandwidth to 5 MHz (G = +) High Speed 9 MHz Bandwidth ( db) 5 V/ s Slew Rate ns Settling
More information10-Bit, Low-Power, Rail-to-Rail Voltage-Output Serial DAC in SOT23
19-195; Rev 1; 1/4 1-Bit, Low-Power, Rail-to-Rail General Description The is a small footprint, low-power, 1-bit digital-to-analog converter (DAC) that operates from a single +.7V to +5.5V supply. The
More informationPrecision, Micropower, Low-Dropout, SC70 Series Voltage Reference
19-2428; Rev ; 4/2 Precision, Micropower, Low-Dropout, SC7 General Description The family of precision, low-dropout, micropower voltage references are available in the miniature 3-pin SC7 surface-mount
More informationPART TOP VIEW. OUT 3.3V AT 100mA POK. Maxim Integrated Products 1
9-600; Rev ; 6/00 General Description The is a buck/boost regulating charge pump that generates a regulated output voltage from a single lithium-ion (Li+) cell, or two or three NiMH or alkaline cells for
More informationPrecision Uni-/Bidirectional, Current-Sense Amplifiers
/MAX9919/MAX992 General Description The /MAX9919/MAX992 are single-supply, high-accuracy current-sense amplifiers with a high input common-mode range that extends from -2V to +75V. These amplifiers are
More information256-Tap SOT-PoT, Low-Drift Digital Potentiometers in SOT23
19-1848; Rev ; 1/ 256-Tap SOT-PoT, General Description The MAX54/MAX541 digital potentiometers offer 256-tap SOT-PoT digitally controlled variable resistors in tiny 8-pin SOT23 packages. Each device functions
More informationOUTPUT UP TO 300mA C2 TOP VIEW FAULT- DETECT OUTPUT. Maxim Integrated Products 1
19-1422; Rev 2; 1/1 Low-Dropout, 3mA General Description The MAX886 low-noise, low-dropout linear regulator operates from a 2.5 to 6.5 input and is guaranteed to deliver 3mA. Typical output noise for this
More informationHigh-Voltage, 350mA LED Driver with Analog and PWM Dimming Control
19-589; Rev ; 7/6 General Description The current regulator operates from a 5.5V to 4V input voltage range and delivers 35mA to 35mA to one or more strings of high-brightness (HB ). The output current
More informationTOP VIEW. Maxim Integrated Products 1
19-1812; Rev ; 1/1 5mA, Low-Dropout, General Description The low-dropout linear regulator operates from a +2.5V to +5.5V supply and delivers a guaranteed 5mA load current with low 12mV dropout. The high-accuracy
More information1.25Gbps/2.5Gbps, +3V to +5.5V, Low-Noise Transimpedance Preamplifiers for LANs
19-4796; Rev 1; 6/00 EVALUATION KIT AVAILABLE 1.25Gbps/2.5Gbps, +3V to +5.5V, Low-Noise General Description The is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers.
More information76V Precision, High-Voltage, Current-Sense Amplifier
MAX41 General Description The MAX41 single-channel high-side precision current-sense amplifier with an input common-mode voltage range from 2.7V to 76V, making it ideal for communications, automotive,
More informationSingle/Dual/Quad, Micropower, Ultra-Low-Voltage, Rail-to-Rail I/O Comparators
9-; Rev ; / Single/Dual/Quad, Micropower, General Description The MAX9 MAX9 single/dual/quad micropower comparators feature rail-to-rail inputs and outputs, and fully specified single-supply operation
More informationSingle/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
19-1803; Rev 3; 3/09 Single/Dual LVDS Line Receivers with General Description The single/dual low-voltage differential signaling (LVDS) receivers are designed for highspeed applications requiring minimum
More information±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver
19-2425; Rev 0; 4/02 General Description The interfaces between the control area network (CAN) protocol controller and the physical wires of the bus lines in a CAN. It is primarily intended for industrial
More informationMAX5452EUB 10 µmax 50 U10C-4 MAX5451EUD 14 TSSOP 10 U14-1
9-997; Rev 2; 2/06 Dual, 256-Tap, Up/Down Interface, General Description The are a family of dual digital potentiometers that perform the same function as a mechanical potentiometer or variable resistor.
More informationQuad Voltage µp Supervisory Circuit in SOT Package
19-1756; Rev 3; 12/05 Quad Voltage µp Supervisory Circuit General Description The is a precision quad voltage monitor with microprocessor (µp) supervisory reset timing. The device can monitor up to four
More informationTOP VIEW REFERENCE VOLTAGE ADJ V OUT
Rev 1; 8/6 EVALUATION KIT AVAILABLE Electronically Programmable General Description The is a nonvolatile (NV) electronically programmable voltage reference. The reference voltage is programmed in-circuit
More informationPin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1
9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance
More informationV CC 1, 4. 7dB. 7dB 6 GND
9-998; Rev ; /7 EVALUATION KIT AVAILABLE.GHz to GHz, 75dB Logarithmic General Description The MAX5 complete multistage logarithmic amplifier is designed to accurately convert radio-frequency (RF) signal
More information622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET
19-1601; Rev 2; 11/05 EVALUATION KIT AVAILABLE 622Mbps, Ultra-Low-Power, 3.3V General Description The low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 70mW at = 3.3V.
More informationMAX9918/MAX9919/MAX9920
19-515; Rev 4; 7/11 EVALUATION KIT AVAILABLE -2V to +75V Input Range, Precision General Description The /MAX9919/MAX992 are single-supply, high-accuracy current-sense amplifiers with a high input common-mode
More informationTOP VIEW. Maxim Integrated Products 1
19-2213; Rev 0; 10/01 Low-Jitter, Low-Noise LVDS General Description The is a low-voltage differential signaling (LVDS) repeater, which accepts a single LVDS input and duplicates the signal at a single
More information150mA, Low-Dropout Linear Regulator with Power-OK Output
9-576; Rev ; /99 5mA, Low-Dropout Linear Regulator General Description The low-dropout (LDO) linear regulator operates from a +2.5V to +6.5V input voltage range and delivers up to 5mA. It uses a P-channel
More information