ISO JSAQ 097 R001 ISO9001

Size: px

Start display at page:

Download "ISO JSAQ 097 R001 ISO9001"

Edward Elmer Brooks
5 years ago
Views:

1 SO JSQ 097 R00 SO900

2 Features Self-Tuning PD Most appropriate PD constant is automatically reckoned up for control objects. PD constant is calculated when making alteration of setting value, or it is corrected when occurring disturbance/hunting etc. lind Function t the request, desirable parameter screen is only displayed and set up. Simplied Timer ON/OFF setting control is available after some certain interval. Function of ON/OFF alarm output is independently usable. Priority Display Demanding parameter screens are monitored and set up under operational mode screen. (max. 9 screens) Multiple nputs Thermocouple/R.T.D. (Pt 00 & JPt 00) are selectable by front key. Standardization of onformity UL, cul, E, & P 66 approved. ("S" Grade is under approval) ompact Size t is a compact size. The depth is only 77mm! (95mm for TTM-00) Manual ontrol (alanceless & umpless) Manual output function is applicable for versatile applications of instrumentation systems. Sampling Time 50mS ("S" Grade model, TTM-00 is excluded), 500mS (Normal Grade model) Front Panel OUT OUT L L OM TTM-004 D RDY UP Key ommunication Function (RS-485 : TOHO protocol/modus) The communication distance is extended up to 500 meters, and maximum 3 units of controllers can be connected with a computer at a time. entralized supervision is available for collection of the whole data and alteration of setting values at remote location. Digital Filter For abrupt alteration of input value, lter effect is operational on software. PD Over-Shoot Protection t is functional to inhibit PD Over-Shoot. D (Digital nput) Functions The following functions are selective. / RUN/REDY utomatic (RUN)/Manual Normal/Reverse ction Normal ()/Reverse ction () T (uto-tuning) Start Timer, Start/Reset Heating/ooling ontrol PD control is available on cooling side. Others T nput (nput Monitor usable) Shift setting of OFF position during ON/OFF control, for both output &. Ramp Function vailable in "S" Grade model only. TTM-00 TTM-007 TTM-006 TTM-005 Size TTM mm TTM mm TTM mm TTM mm TTM mm TTM mm TTM-009 FUN DOWN Key L Output monitor for event output L Output monitor for event output OUT Output monitor for output OUT Output monitor for output RDY Lighting while being operation ready OM Lighting while operating communication (option) Mode key for shifting display D Lighting while operating D (option) FUN Function key for digit shift, T(uto-Tuning), RUN/REDY, Timer Start/ Reset ndication of process value & character display for alarm, PD etc. ndication of setting value, manipulation value & residual time of timer. Up/Down key for alteration of setting value Pressing to 0sec digit/00ms 0 to 0sec 0 digits/00ms over 0sec : 00 digits/00ms Panel nstallation TTM-00, 004 TTM-005 TTM-006 TTM-007 TTM-009 For this panel installation, please be careful sufciently to avoid any of damage.

3 Standard Specications nput Switchable Thermocouple K, J, T, R, N, S, (JS60995) R.T.D. Pt00, JPt00 (Load resistance : 0 or less) urrent Voltage urrent 4 to 0m D (nput resistance 50), Voltage 0 to 5V D/ to 5V D (input resistance 500k over) ndication (haracter) 4 digits, 7 segments Green 0mm height (7.6mm height for TTM-00, mm height for TTM-006/009) (Setting Value) 4 digits, 7 segments Red 8mm height (5.5mm height for TTM-00) Various Function ndication LED : Red (L, L, OUT, OUT or RDY), LED : Green (OM, D), OM for TTM-00 is st decimal digit of display. ontrol Method PD uto-tuning Proportional band (P) 0. to 00.0% of setting limiter span PD Self-Tuning Proportional band (P) at Output 0.0 to 0.00 times (Times per P) Reset time (ntegral)() to 3600 sec (0: OFF) Rate time (Deviation)(D) to 3600 sec (0: OFF) ycle time (T, T) to 0 sec Dead band (D) to or -00 to +00 () ON/OFF ontrol sensitivity (, ) 0 to 999 or 0.0 to () OFF Point of Output & Position of setting -99 to 999 or to () ontrol Output Relay ontact 50V, 3 (Load resistance) a contact (On heating/cooling operation, output is 50V,.4 load resistance, a contact) SSR Drive Voltage 0 to V D (Load resistance : 600 or more) urrent 4 to 0m D (Load resistance : Max 600) Sampling Time "S" Grade : 0.5sec (TTM-00 is excluded), Normal Grade : 0.5sec (Output change cycle is also same) Setting and Thermocouple (0.3% + digit) of process value or, either of bigger numerial values is taken. (mbient temperature : 3 0) ndication -00 to 0 : 3, -00 to 00 : 4 Thermocouple under 400 is not regulated. ccuracy R.T.D. (0.3% + digit) of process value or 0.9, either of bigger numerial values is taken. (mbient temperature : 3 0) mbient temperature 0 to 50 : (0.5% + digit) or.5, either of bigger numerial values is taken. urrent (4 to 0m D), (0.3% + digit) in setting limiter span (mbient temperature : 3 0) Voltage (0 to 5V D, to 5V D) Memory Element EEPROM Voltage Source 00V to 40V (50/60Hz) Weight TTM-00/004 : less than 80g, TTM-005/006 : less than 300g, TTM-007 : less than 50g, TTM-009 : less than 380g Power onsumption Less than 0V (40V ) ccessories nstruction manual & installation attachment (TTM-00/004) or installation metal instruments (TTM-005/006/007/009) Operating ondition 0 to 50, 0 to 90%RH (under non-condensation) Storage ondition -5 to 70, 5 to 95%RH (under non-condensation) Functions Manipulated Variable Limiter 0.0 to 00.0% (ML, MH, ML, MH) Setting Limiter (SLL, SLH) See nput and Range. Selectable ontrol Mode (NT) uto-tuning PD Type, NormalReverse, uto-tuning PDON/OFF orrection 0 Point Setting -99 to 999 or to () (S) orrection Gain Setting 0.50 to.00 (times) nput Filter 0 to 99 (sec) Manual Reset (P) 0.0 to 00.0%, to 00.0 (heating& cooling) of proportional band. Timer Operation Mode (TMM) 0.00 minute to minutes, 0.00 hour to hours. ccuracy : (.5% sec) of setting time. Decimal Point Shift (DP) Decimal point display available (up to 999.9) Manual ontrol uto/manual control can be switched by key. Run/Ready Run and Ready can be switched by key. lind Function No indication available for non-required display. uto-tuning (T) oefcient fter T, the computed band is newly to set up with another coefcient. FUN Key Digit Shift T RUN/REDY Timer Start/Reset Priority Display rbitrary parameter screens are shifted to indication of operation mode by key. (max: 9 screens) Lock Function (LO) 4 modes (OFF, LL, Operation Lock, Lock except Operation Mode) Watch Dog Function Data checked by EEPROM (Err0), /D converter check (Err), and uto-tuning check (Err), uilt-in watch dog timer. Ramp Function Operation : When is changed, it sets variation of per minute. (vailable in "S" Grade) The variation for & can be set individually. * is provided when option D is selected. Setting Range : 0.0 to The Ramp function is turned off by 0.0 setting. Setting Unit : 0./minute (Thermocouple, R.T.D. input type) 0. times/minute of setting unit (nalogue input type) ccuracy : (.5% + 0.5sec) *TTM-00 is excluded Event Output (L) Function : contact output (8 modes), Special contact output (3 modes), additional functions (3 modes) Setting Range : to or -999 to 9999 () Sensitivity : 0.0 to or 0 to 9999 () Rating : 50V.4 (Load resistance) a contact ontact polarity : Selectable either normal open or normal close.

4 dditional Functions (Option) Event Output (L) Function : contact output (8 modes), Special contact output (3 modes), additional functions (3 modes) Event Output (L or OUT) Setting Range : to or -999 to 9999 () Sensitivity : 0.0 to or 0 to 9999 () Rating : 50V.4 (Load resistance) a contact When selecting output at contact output, the output generates on cooling side during heating/cooling. ontact polarity is selectable, either normal open or normal close. D Function : / switchable (OFF: ), uto/manual switchable (OFF: Manual), Run/Ready switchable (OFF: Ready), Normal/Reverse switchable (OFF: Normal), Normal ()/Reverse() switchable (OFF: Normal ), Timer Start/Reset (OFF: ounting) nput Specications : Minimum input time : 500ms, OFF voltage : 6V D max, ON current : 6m max, Permissible resistance value between terminals : ON=333 max, OFF=500k min T nput Setting Range to 30/, ccuracy : 5% (setting resolution ) Heating & ooling See "ontrol Output" in standard specications. ommunication TOHO protocol MODUS (TTM-00 is excluded) RS-485 conformable RS-485 conformable Protocol TOHO protocol Protocol MODUS (RTU or S) Network : RS-485 conformable Network : RS-485 conformable Multi-Drop system (:3 stations max.) Multi-Drop system (:3 stations max.) Direction of information : Semi-duplex Direction of information : Semi-duplex Synchronous method : synchronous Synchronous method : synchronous Transfer code : S code ( is excluded) Transfer code : S code ( is excluded) nterface : Two line system nterface : Two line system ommunication Speed : 00/400/4800/9600/900PS ommunication Speed : 00/400/4800/9600/900PS haracter: Start bit bit xed haracter: MODUS (RTU) MODUS (S) Stop bit / bit Start bit bit xed bit xed Data length 7/8 bit Stop bit / bit / bit Parity Non/odd number/even number Data length 8 bit 7 bit check Non/available Parity Non/odd number/even number Non/even number ddress to 99 ommunication address to 47 stations Response Delay Time : 0 to 50mS Response Delay Time : 0 to 50mS Power circuit, PU circuit and nsulation Power circuit, PU circuit and nsulation Operation Flow nput and Range (Thermocouple & R.T.D. switchable by key) Thermocouple Setting Range Display Range Non-decimal point Decimal point Non-decimal point Decimal point K -00 to to to to J -00 to to to to R 0 to to 70 T -00 to to to to 40.0 N -00 to to to to S to to 70 0 to to 80 R.T.D. Setting Range Display Range Non-decimal point Decimal point Non-decimal point Decimal point Pt00 (JS/E) -90 to to to to JPt00 (JS) -90 to to to to 50.0 urrent, Setting Range Voltage Non-decimal point Decimal point Display Range to pprox. -% of low limiter setting 0 to 5V V -999 to to (SLL) to pprox, +% of high limiter to setting (SLH), within the setting range to pprox. -% of low limiter setting to 5V V -999 to to (SLL) to pprox, +% of high limiter to setting (SLH), within the setting range to pprox. -% of low limiter setting 4 to 0m m -999 to to to Event ontact Output Mode (larm) bnormal /heater code bnormal contact output bnormal heater contact output Only lind key Priority display setting key Set up Power On Shift by special key operation key ontrol (SLL) to pprox, +% of high limiter setting (SLH), within the setting range. bnormal contact output + abnormal heater control output or available, when no selecting T input. nitial Display (4 secs) Operation Mode Press mode key more than secs Sellection display or setting mode key key key key Event Event D ommunication nput type display is indicated for 4 seconds after power is ON, then shift to Operation Mode. key Timer Timer Operation Mode Start Mode uto start : ON delay Manual start : ON delay Event start : ON delay uto start : OFF delay Manual start : OFF delay Event start : OFF delay start : OFF delay ON delay : ontrol start or event output is ON, after time-up OFF delay : ontrol stop or event output is OFF, after time-up * Output is selectable, either main control output or event output. Timer Drive Setting Non-use timer function ontrol output Event output Event ode (larm) Deviation high and low limit Deviation high limit Deviation low limit Deviation high and low range busolute value high and low limit busolute value high limit busolute value low limit busolute value high and low range dditional Functions Holding wating sequence Holding + awaiting sequence When special function is, only code or selectable. key Transfer Output (Not available in TTM-004S/007S)

5 dvanced Features Self-Tuning PD (Standard) Temp. lteration lind Function (Standard) Self-tuning is ON 3 35 Hunting/Disturbance Time The mode screen or the parameter screen whichever you demand can be displayed by merely pressing a key, at the request. When the screen is erased, the set value is normally not indicated but the measured value () is only shown. Timer Function (Standard). read Oven Machine Put dough into oven and press the timer start key. While setting timer, temperature in oven is controlled by heater. fter timer counts up, control of oven is stopped automatically. (This example is for control stop after the timer counts up.) Start Key Setting Time Timer ction Time-up ontrol Output. Package Machine and ndustry Machinery (n case of start of control after the relative equipments are prepared) When power is "ON", the timer starts to count. While setting timer, control output is stopped. fter the timer counts up, control is started automatically. (For control start after the timer counts up.) Power Setting Time Timer ction Time-up ontrol Output utomatic/manual ontrol (Standard) utomatic/manual control can be switched by front key for D or communication. When checking the manipulation action for valve and heater during a system test run, or when normal control is not operational due to sensor failure, the system can be operated manually in this mode. utomatic ontrol Previous Manipulation Value Switching Manual ontrol alanceless umpless hange of Mnipulation Value Heating/ooling PD ontrol (Option) Low ost Type Heating PD D ommunication Function (Option) onnection to Personal omputer TTM-000 controllers can observe concentrically by personal computer, as connection diagram instructed below. J 36 Manual ontrol utomatic ontrol alanceless umpless alanceless umpless (neffect) Switching ooling PD Host computer RS-3 Transducer RS-485 Digital Filter (Standard) This is a function to realize a R lter effect on software by means of primary delay arithmetic on the measured value (). The lter effect can be set by time constant (t). (The time constant is a period to reach 63% of value, when the input changes stepwise.) 00% nput Signal 0% Time Reading 00% Non-Digital Filter Time onstant (t)=0 0% Time Reading 00% Digital Filter 63% Time onstant (t)0 0% Time Time onstant (t) Digital lter with the following uses ) To eliminate high frequency noise : When electric noise is added to the input, the adverse effect is reduced. ) When input changes abruptly, the response delay is possibly made. Over-Shoot Protection PD (Standard) TYPE (Over-Shoot Protection) TYPE PD (Over-Shoot Protection) TYPE TYPE PD (Former PD) Shifting OFF Position in ON-OFF ontrol (Standard) When the Shift value is set to 0 (zero), the OFF position is the set value position. ontrolled Temperature ( =5) ON OFF Set Value () hanged to 5 ontrolled Temperature ( =5) ON OFF Set Value () When the OFF position setting is shifted by +5, ON/OFF position shifts to that of +5 minutes upper than the original position, though the set value is not changed. When the OFF position setting is shifted toward the minus direction, the OFF position shifts in the reverse direction. Ramp When (set value) is changed, this function slopes the curve. The actual action is performed in such a manner that dummy is gradually changed toward the new set value, and the control is performed to the dummy set value. Set the change of per minute to use the ramp function. When the characteristic of the item to be controlled does not permit a sudden change of the manipulated variable, or when the change rate (slope) of the variable is important, the ramp function is very effective. f it is desire to have great inuence on (measurements), the result of expectation might not be obtained because only is changed. min The set value is changed from the temperature at the start-up to by the amount of change set in fter that, min when switched to by D input, a set value is changed up to by the amount of change set in. TME is switched by D input communication key. Start-up * When the option is selected, the above is possible to operate. TTM-000

6 Ordering nformation (Model ongurations) Model Grade nput Output TTM Model mm /3 DN mm /6 DN mm /8 DN VERTL mm /8 DN HORZONTL mm 3/6 DN mm /4 DN Grade Normal Grade (Sampling Time : 500mS) S "S" Grade (Ramp function & Sampling Time : 50mS) Not available in TTM-00 nput Thermocouple (K, J, T, R, N, S, ), R.T.D. (Pt00, JPt00) 4 to 0m D, 0 to 5V D, to 5V D Output R Relay contact P SSR drive voltage V D urrent 4 to 0m Option Output Relay contact or EV P Output SSR drive voltage or P selectable R EV Relay contact TTM-00/004 : Not optional TTM-005/006/007/009 : Not available when D is selected. D T nput Not provided when is selected for Output. TTM-00/004 Not provided when D is selected. E D (Digital nput) TTM-00/004 : Not usable when T is selected. TTM-005/006/007/009 : Not obtained when EV is selected. M ommunication RS-485 (TOHO protocol) vailable when Normal Grade is selected. X RS-485 (TOHO protocol MODUS) vailable when "S" Grade is selected. H K J F Transfer Output G Please refer to this table for appropriate specications when placing order. Wiring TTM-00 when makig D with open collector output, terminal # needs to be "+ (plus)". NO OUT/EV RS485 T/V RTD D/T b POWER OUT EV NO TTM-004 when makig D with open collector output, terminal #9 needs to be "+(plus)". NO 3 OUT 3 POWER NO EV / OUT Specications are subject to change without notice. Note: The color printed in this catalog may be different from actual color RS485 D/T EV RTD b T TTM-005/006/009 when makig D with open collector output, terminal # needs to be "+(plus)". D/EV 3 3 b T RTD 4 4 RS485 EV 5 5 OUT 6 EV 6 T NO NO / OUT Transfer Output POWER 0 0 No used TTM-007 when makig D with open collector output, terminal #8 needs to be "+(plus)". No used OUT 3 EV NO NO / OUT POWER 6 7 Remarks EV for option R selected. : EV for option of either or R selected D/EV RS485 T EV No used RTD 9 0 b T/V Option to 0mV D to V D 0 to 5V D to 5V D 0 to 0V D 4 to 0m D Terminals "(EV: larm )" provided for in the standard specications. Without output, EV is not available. Output is equally used as EV, but not activated simultaneously. Transfer Output (H, K, J, F, G, ) is only available in "S" Grade. ommunication "X"(TOHO protocol MODUS) is only availavle in "S" Grade. Option of "M"&"X" can not be selected at the same time. Ramp Function can be used when "S" Grade is selected. "S" Grade is not provided in TTM-00. Only one can be selected from H, K, J, F, G, vailable when "S" Grade is selected. Not available in TTM-004S/007S. D No 9 + side ommunication onnect T/R () and T/R () (Use transducer, except RS-485 in use) Relay Output : ommon, NO : Normal open SSR Drive Output onnect directly to + &- input of SSR EV, hangeable normal open & normal close T onnect specic current transformer (TL) R.T.D. nput onnect to, and b Thermocouple nput onnect to porarity (+,-) When OUT is "P", connect directly + &- on input of SSR side. Make sure the polarity (+,-) for Transfer Output, when you wire. Dimensions TTM-00 European terminal WG less than 8 (Upper side) D WG less than 6 (Lower side) TTM-004/005/006/007/009 D c.8 a L Model a b c d D L TTM (N-.5) TTM (N-3) TTM (N-3) + -0 TTM (N-3) + -0 TTM (N-3) + -0 TTM (N-3) + -0 "L" is for installation of multiple units. When you use compressed lead wire to install multiple units, please be careful sufciently not to touch the other lead wires. Please clean by the well squeezed cloth with neutral detergent. Head Ofce: -3-, Tanashioda, Sagamihara Kanagawa 9-5 Japan. Phone: FX: overseas@toho-inc.co.jp Web site: b d

PLUG-IN DIGITAL TEMPERATURE CONTROLLER

QMS,EMS Accreditations R001RE005 TTM-04SP TTM-04SP PLUG-IN DIGITAL TEMPERATURE CONTROLLER TTM-04SP TOHO ELECTRONICS INC. PLUG-IN DIGITAL TEMPERATURE CONTROLLER TTM-04SP Features Improved controllability