OpenBridge Designer Interoperability
|
|
|
- Brooke Peters
- 5 years ago
- Views:
Transcription
1 OpenBridge Designer Interoperability Steve Willoughby, Senior Application Engineer Bentley Systems, Incorporated 2018 Bentley Systems, Incorporated
2 Agenda: OBM to LBC and Back OBM to LBS and Back OBM to ProConcrete Bentley Systems, Incorporated
3 Bentley Systems, Systems, Incorporated Incorporated OBM to LBC and Back
4 OBM to LBC and back to OBM - Data Interop Two way Data Exchange Superstructure LEAP Girders or Custom Girders Deck + Haunch Material properties Substructure Piers Abutments Bearings / Beam Seats Material properties Bentley Systems, Incorporated
5 Known Limitations - Superstructure Deck Slab Thickness: Use minimum thickness of the slab across all cross-sections and all spans Haunch Thickness: Conservatively transfers the maximum thickness from among all beams in all spans Beam Layout: End blocks are not transferred to LBC Beam Cross-Sections: If using custom beams in OBM, the LBC library will be searched for a beam with the same name. If none found, user will need to modify the library. Bearings: One way transfer to LBC. LBC only supports a rectangular bearing assembly. Barriers are not transferred Bentley Systems, Incorporated
6 Known Limitations - Substructure LBC does not support sloped caps. Steps used instead. LBC does not support Oval columns converted to equivalent Rect. Wingwalls are not transferred Bentley Systems, Incorporated
7 Demo Bentley Systems, Incorporated
8 Bentley Systems, Systems, Incorporated Incorporated OBM to LBS and Back
9 OBM to LBS and back to OBM - Data Interop Two way Data Exchange Superstructure Built-up Girders Rolled Steel Girders Haunch Cross Frames and Stiffeners Material properties Substructure Piers Abutments Bearings / Beam Seats Material properties Bentley Systems, Incorporated
10 Known Limitations - Superstructure Deck Slab Thickness: Use minimum thickness of the slab across all cross-sections and all spans Haunch Thickness: Conservatively transfers the maximum thickness from among all beams in all spans Beam Layout: Changes in LBS are not sent back to OBM Stiffeners and Cross Frames are one way to LBS Bearings: One way transfer to LBS. LBS only supports a rectangular bearing assembly. Barriers are not transferred Bentley Systems, Incorporated
11 Known Limitations - Substructure LBS does not support sloped caps. Steps used instead. LBS does not support Rect-chamfered, rectangular-filleted, rectangular-beveled and Oval column shapes, All will be converted to equivalent Rect. Wingwalls are not transferred Bentley Systems, Incorporated
12 Demo Bentley Systems, Incorporated
13 Bentley Systems, Systems, Incorporated Incorporated OBM to ProConcrete
14 Why ProStructures? Complex structures where 2D plans hardly depict what needs to be constructed. We live in a 3D world BIM/BrIM Interaction with other software applications that required intelligent data inside. 3D Model is the single source of truth of the structure. Reports and plans will be generated from the model Bentley Systems, Incorporated
15 Transitioning from 2D to 3D Design Plans still need to be submitted as per legal/contractual requirements. Generate a 3D model of the detailing Multiple views will be generated from the 3D model: plan, elevation, sections still allowing the development of plan sheets. Intelligent 2D annotation of the views using the intelligence of the 3D model. Parametric environment: any changes in the 3D model will affect the developed plan sheets and their annotation. Automated bar list and bar bending charts generation Bentley Systems, Incorporated
16 Common Platform (DGN) OpenBridge Modeler Open Roads Designer AECOsim Building Designer ProStructures = ProConcrete + ProSteel Based on the same, MicroStation platform (DGN) Bentley Systems, Incorporated
17 ProStructures Bentley Systems, Incorporated
18 ProStructures Bentley Systems, Incorporated
19 Drawing Production Bentley Systems, Incorporated
20 Bar Bending Schedules User-defined reports Bentley Systems, Incorporated
21 Integration with ProConcrete Concrete objects are automatically recognized in ProStructures Footings Columns Beams Slabs Reinforcing using ProConcrete tools and Dynamic Views to Label & Detail Bentley Systems, Incorporated
22 ProConcrete Demo Bentley Systems, Incorporated
23 ProConcrete Demo Bentley Systems, Incorporated
24 OpenBridge Modeler Bentley Systems, Incorporated
25 OpenBridge Modeler with ProStructures Bentley Systems, Incorporated
26 OpenBridge Modeler with ProStructures Bentley Systems, Incorporated
OpenBridge Modeler: What is it and how can I use it today?
2015 Bentley Systems, Incorporated OpenBridge Modeler: What is it and how can I use it today? Steve Willoughby, Senior Application Engineer Agenda: Introducing OpenBridge Modeler OpenBridge Modeler Features
ProConcrete. Gernot Jeromin Product Manager Bentley Systems, Incorporated
ProConcrete Gernot Jeromin Product Manager ProConcrete 3D CAD Software for Concrete and Reinforcement 2 WWW.BENTLEY.COM What is ProConcrete AutoCAD Application MicroStation V8i version will be available
Suggested Reinforcement Detailing Practices Based on comments from R&D and ES ESS Committees
Suggested Reinforcement Detailing Practices Based on comments from R&D and ES ESS Committees General 1. When detailing substructures, it is preferable not to use series bars unless necessary. The first
Quality Control and Quality Assurance Guide
Quality Control and Quality Assurance Guide Bridge Division, Design Section April 2017 Table of Contents Chapter 1 About this Guide... 3 Chapter 2 Goals and Objectives... 5 Chapter 3 Participants... 6
Bentley speedikon V8i
Bentley speedikon V8i Overview Bentley speedikon V8i Products of the speedikon product line Bentley speedikon Industrial V8i Bentley speedikon Architectural V8i Bentley speedikon ProjectEditor V8i Bentley
Bridge Design and Drafting Manual Oregon Department of Transportation
Bridge Design and Drafting Manual - 2005 SECTION 2: DRAFTING PRACTICES 2.1 COMPUTER AIDED DRAFTING (CAD) 2.1.1 Standard File Format The standard file format for submission of electronic CAD files to the
STANDARD MSGDET4AC: NOTES TO DESIGNER
GIRDER DETAILS (SHEET 1 OF 2) NOTES TO DESIGNER: Standard is to be used for trapezoidal or curved, 4-span continuous, steel plate girders. The standard includes girder details; tables for plate sizes,
This specification describes the minimum requirements for structural steel drawings.
1/7 1.0 PURPOSE This specification describes the minimum requirements for structural steel drawings. 2.0 GENERAL As stated in specification SPEC-0800, drawings are intended to be Design drawings. Sufficient
Construction Tolerances - The following tolerances apply to cast-in-place structures:
00540.40(b) Construction 00540.40 Tolerances - The following tolerances apply to cast-in-place structures: (a) Foundation Footings: (1) Lateral Alignment: Actual (as cast) location of the center of gravity:
Architect. Architect.
The The line line sketch sketch with with modified modified height height for for plinth plinth floor floor is is displayed. displayed. Open Open Architectural Architectural plan plan file, file, which
50.24 Type, Size and Location Plans for Culverts, Bridges and Culvert Bridges
50.24 Culverts, Bridges and Culvert Bridges Type, Size and Location (T, S & L) Plans shall be required for all Bridges, Culvert Bridges and Culverts of eight-foot (8') clear span or greater as follows:
AASHTOWare Bridge Design Training Weld Design and Weld Fatigue Analysis (BrD 6.5) Topics Covered Part 1: Weld Design/Design Review
AASHTOWare Bridge Design Training Weld Design and Weld Fatigue Analysis (BrD 6.5) Topics Covered Flange to web weld LRFD Design Flange to web weld LRFD Design Review Weld Fatigue Analysis Part 1: Weld
Design, Drawing and Sheet Composition
Design, Drawing and Sheet Composition Tools, Technologies and Concepts 1 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated 2018 Bentley Systems, Incorporated 2 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated
OpenPlant. Hayley Brown Industry Consultant, Bentley Plant Bentley Systems, In
OpenPlant Hayley Brown Industry Consultant, Bentley Plant tley Systems, In co Introduction What is OpenPlant? OpenPlant is the branding for the next generation of applications and tools based on ISO 15926
Bentleyuser.dk ÅRSMØDE 2011 Vejle,
2011 Bentley Systems, Incorporated Bentleyuser.dk ÅRSMØDE 2011 Vejle, 14.+15.11.2011 Bentley OpenPlant Update Carsten Gerke Senior Sales Director Bentley Plant EMEA Today s Agenda 2010 Bentley Systems,
Number Object Category Attribute Name Explanation Examples Further comments
1 STORY 2 GRID 3 COLUMN 2 Story Elevation Absolute elevation for story (the name "story" is prefered over "level", as level is used in e.g. Revit Typically, our elevations for a project are all relative
What s Happening in (A)EC? Outline 2/1/2012. Bridge Information Modeling: Towards BIM/BrIM for the Bridge Lifecycle
What s Happening in (A)EC? Bridge Information Modeling: Towards BIM/BrIM for the Bridge Lifecycle Stuart S. Chen, Ph.D., P.E. Dept. of Civil, Structural, and Environmental Engineering University at Buffalo
3D Modeling Demonstration
2014 Bentley Systems, Incorporated 3D Modeling Demonstration Derricke Gray, Product Manager Bentley Civil Americas ESS Statewide Rollouts: 3D Modeling Engineering Content Management (ProjectWise) 2 WWW.BENTLEY.COM
AECOsim Building Designer. Quick Start Guide. Chapter 2 Making the Mass Model Intelligent Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Chapter 2 Making the Mass Model Intelligent 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Making the Mass Model Intelligent...3
3 of 14 Mastering Chief's CAD Tools
3 of 14 Mastering Chief's CAD Tools Welcome To The Webinar 12" Concrete Columns 6-5/8" ReeBar 12" OC Stirpus 6" Concrete Patio Floor Railings (TBD) 30" x 30" x 18" 5" PVC Drain Tile Drain to Daylight 24"
Bentley Substation 2010 Bentley Systems, Incorporated Håkan Norling Bentley Professional Services
www.bentley.com Bentley Substation Håkan Norling Bentley Professional Services Agenda, 12 th of November 2010 Bentley s Substation design solution Integration of primary- and secondary design based on
AASHTO/NSBA Steel Bridge Collaboration G Design Drawing Presentation Guidelines. AASHTO/NSBA Steel Bridge Collaboration
AASHTO/NSBA Steel Bridge Collaboration G 1.2-2003 Design Drawing Presentation Guidelines AASHTO/NSBA Steel Bridge Collaboration Preface This document is a standard developed by the AASHTO/NSBA Steel Bridge
MicroStation CONNECT Edition - Information Modeling for Infrastructure Professionals
MicroStation CONNECT Edition - Information Modeling for Infrastructure Professionals Urmas Jüriorg, CAD-süsteemide OÜ, Estonia 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated 2016 Bentley Systems,
JOIST DETAILS Plate nail, 16d (0.15" x 1 ") at 1 on-center Blocking panel: 1 1 8" TJ Rim Board, 1 1 TimberStrand SL or TJI joist Toe nail, 10d (0.11" x ") at on-center A1 CS BEAM DETAILS L1 eb stiffener
TYPICAL SECTIONS TYPICAL NO. 1 (MAINLINE) STA TO STA STA TO STA ROUNDING DETAIL TYPICAL NO.
FILL SECTION TYPICAL NO. 1 (MAINLINE) STA. 2434. TO STA. 244035.16 STA. 244396.83 TO STA. 2449. CUT SECTION ROUNDING DETAIL FILL SECTION TYPICAL NO. 3 (DETOUR) CUT SECTION STA. 242849.86 TO STA. 2453.88
General Layout. Eng. Maha Moddather
General Layout Eng. Maha Moddather mahamoddather@eng.cu.edu.eg Introduction Concrete Beam subjected to Bending Moment around Major Axis M x Compression d Concrete tensile strength is neglected A S Tension
Accelerated Bridge Construction (ABC) and the Utah Experience
Accelerated Bridge Construction (ABC) and the Utah Experience by Kris Peterson, P.E., UDOT Mary Lou Ralls, P.E., Ralls Newman, LLC AASHTO Subcommittee on Construction Annual Meeting Computers and Technology
James Luebke, PE Structural Development Engineer WisDOT Bureau of Structures
James Luebke, PE Structural Development Engineer WisDOT Bureau of Structures 1 Highlights WisDOT s ABC Development of PBES Piers Road of Development, Implementation, and Institutionalization Lessons Learned
APPENDIX C: MAIN RIVER BRIDGE PLANS. The graphics in this appendix depict the Practical Alternatives.
APPENDIX C: MAIN RIVER BRIDGE PLANS The graphics in this appendix depict the Practical Alternatives. NO. DESCRIPTION BY 4:36:17 PM 10/3/2007 STA.10+843.000 \ PYLON 6.000 5.000 (TYP) PYLON ELEVATION 210.000
AutoPLANT Product Update
AutoPLANT Product Update DK User Meeting 15 th November 2011 Chris Binns AutoPLANT Product Manager Agenda Introduction to me... Where we are today... AutoPLANT V8i (SELECTseries 3) Where we are going...
PANEL CRIB PIERS AND TOWERS
CHAPTER 17 PANEL CRIB PIERS AND TOWERS Panel crib piers are made of trusses with panels set horizontally or vertically and are normally braced with transoms, sway bracing, rakers, bracing frames, and tie
Value Engineering Design Build MODULAR INFRASTRUCTURE
Value Engineering Design Build MODULAR INFRASTRUCTURE VALUE ENGINEERING When infrastructure projects find themselves in densely populated areas, or occur on a site with poor conditions, the opportunity
Deep Creek Canyon US Highway 12
Deep Creek Canyon US Highway 12 ABC Techniques in Rural Montana Jim Scoles Morrison-Maierle 1 Location Deep Creek Canyon US Highway 12 Helena National Forest Great Falls Map of mid MT showing Location
Programme TOC. CONNECT Platform CONNECTION Client MicroStation CONNECT Edition i-models what is comming
Bentley CONNECT CONNECT Platform MicroStation CONNECT Edition 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated Programme TOC CONNECT Platform CONNECTION Client MicroStation
Practice Workbook. Create 2D Plans from 3D Geometry in a Civil Workflow
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in
11/15/2010. Construction. Accelerated Bridge Construction (ABC) Definition. Systems (PBES) Definition
Successes in Accelerated Bridge Construction Mary Lou Ralls, P.E. Principal Ralls Newman, LLC (formerly Texas State Bridge Engineer) 1 Accelerated Bridge Construction (ABC) Definition Structural & geotechnical
RAPID RIVER RUSTIC, INC.
TAG UNIT CODE STYLE MANUFACTURER EXTERIOR DOOR SCHEDULE ROUGH OPENING SIZE JAMB SIZE FIRE RATING LABEL NOTES COLOR DETAIL HEADER WIDTH HEIGHT *Conventional construction code minimum for use with A3 only.
Overview of Precast ABC Projects in the Pacific Northwest. Chuck Prussack, P.E., Oldcastle Precast, Inc - Spokane
Overview of Precast ABC Projects in the Pacific Northwest Chuck Prussack, P.E., Oldcastle Precast, Inc - Spokane 1 Techniques Additional prefabrication of units to reduce field timeline Simplify deck installation
Advance Concrete. Tutorial
Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances
RAIL PANEL AT TRANSITION SECTION PLAN - POST DETAIL PLAN - TUBE SPLICE. Colorado Department of Transportation. Staff Bridge Branch
Limits of pay length for Bridge RailType 10M (For post spacing, see Dwg. No. B ) B60610 (Use with B60610A) 8 min. 1 max. 8 min. 1 max. 10 0 Max. 10 0 Max. post spacing 10 0 Max. 2 5 Post 1 x 1 slotted
BRIDGE TYPE CONCEPT EVALUATION
SD44/PLATTE-WINNER BRIDGE CORRIDOR STUDY AND ENVIRONMENTAL ASSESSMENT Agreement No. 410583, Work Order PD-19-16 Project Nos. HP5596(19); P0044()290, PCN 05X0 PROJECT MEMORANDUM BRIDGE TYPE CONCEPT EVALUATION
Auto-drafting Module for midas Gen MIDAS Information Technology Co., Ltd.
MIDAS Information Technology Co., Ltd. 01 Introduction midas DShop empowers engineers to streamline the design process all the way to generating engineering drawings. midas DShop imports models complete
Resurfacing and Overlay Made Easy with New Overlay Tools in Roadway Designer
Resurfacing and Overlay Made Easy with New Overlay Tools in Roadway Designer Joe Waxmonsky, Bentley Civil 2 WWW.BENTLEY.COM Why Overlay? Why Overlay? Accommodate wedging / leveling Milling Widening Crown
2010 Bentley Systems, Incorporated. Point Clouds in MicroStation V8i
Point Clouds in MicroStation V8i LiDAR Challenges Working with many forms of LiDAR (light detection and ranging) Laser Scanning Airborne LiDAR Mobile Mapping Systems All forms produce large data sets that
Maintenance of Traffic sequence of operations including any phasing and detour maps;
All Local-let projects are required to have a Stage 2 submittal to the LPA Manager for review. The only exceptions are 2-lane resurfacing, striping, guardrail, and raised pavement markers, unless otherwise
AVEVA PDMS. Business Benefits. Accurate and clash-free 3D plant design
AVEVA PDMS Accurate and clash-free 3D plant design With ever increasing global demand for products from process and power plants, AVEVA PDMS enables companies to design, construct and maintain high quality
ABC and Innovative Bridge Construction for Minnesota Local Roads
ABC and Innovative Bridge Construction for Minnesota Local Roads May 23, 2013 To box the cha of t unl qua gra ma all g You ma add Tex Chris Werner, PE Senior Bridge Engineer HDR Engineering, Inc. 763-278-5918
3. Are component and cladding design pressures consistent with ASCE 7 for the wind speed and exposure category (ASCE 7 Fig. 6-3)?
Mobile County Public Works Residential Plan Reviewers Checklist For Structural Requirements of Wood Framed Residences Recommendation: Permit as Noted Revise Plans and Resubmit MCPW Ref. No. Design Criteria:
PRECAST CONCRETE BRIDGE SUBSTRUCTURE COMPONENTS. Presented by: Matthew Youngblood, PE, SE Scott Noyer, PE Janssen & Spaans Engineering
PRECAST CONCRETE BRIDGE SUBSTRUCTURE COMPONENTS Presented by: Matthew Youngblood, PE, SE Scott Noyer, PE Janssen & Spaans Engineering PRECAST SUBSTRUCTURE COMPONENTS ADVANTAGES SCHEDULE INCREASES CONSTRUCTION
StereoSTATIKA. Main Features:
A complete software package for 2D/3D Structural Design of Concrete Frames with advanced RC Details by Apostolos Konstandinides www.pi.gr Main Features: Single, user friendly, visual (2D&3D) input of structural
Section 4: Ontario Realty Corporation CAD Standards and Guidelines
Section 4: Ontario Realty Corporation CAD Standards and Guidelines Ontario Realty Corporation 11 th Floor, Ferguson Block 77 Wellesley Street West Queen s Park Toronto, ON, M7A 2G3 August 10, 2007 Version
6/19/2014. Milton Madison Bridge Slide. Project Partners. The Challenge. Aaron L. Stover, PE, SE Michael Baker Jr., Inc.
Kentucky Society of Professional Engineers May 23 rd, 2014 Lexington KY Milton Madison Bridge Slide Aaron L. Stover, PE, SE Michael Baker Jr., Inc. Project Partners The Challenge Milton, KY Existing Bridge
AVEVA PDMS 12.0 The 3D plant design application for accurate and clash-free plant design
AVEVA PDMS 12.0 The 3D plant design application for accurate and clash-free plant design The process and power industries seek to commission high-quality plant earlier, and to bring it on line with minimum
Digitally Signed 06/02/2015
Digitally Signed 06/0/05 Digitally Signed 06/0/05 Digitally Signed 06/0/05 FED. ROAD DIST. NO. STATE FED. AID PROJ. NO. SHEET NO. TOTAL SHEETS 6--5 6 ARK. JOB NO. 08057 6 8 075 QUANTITIES 5706 SUMMARY
Introducing Bentley Map VBA Development
Introducing Bentley Map VBA Development Jeff Bielefeld Session Overview Introducing Bentley Map VBA Development - In this session attendees will be provided an introductory look at what is required to
Project Booklet. Structural Drafting with AutoCAD
Project Booklet Structural Drafting with AutoCAD Introduction 1 General Setup 2 Border and Title Block 3 Drafting the Foundation Plan (Plate 1) 8 Drafting the South Elevation (Plate 2) 11 Drafting Section
Applied Precast Concrete Detailing
Applied Precast Concrete Detailing Tekla Structures 11.0 August 30, 2005 Copyright 2005 Tekla Corporation Copyright 2005 Tekla Corporation Applied Precast Concrete Detailing i Copyright 2005 Tekla Corporation
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR -Module Number- 0065213 -Session-1986-87 -Superclass- -Title- TM STRUCTURAL
Advance Steel Essentials
Advance Steel Essentials Course Length: 3 days This course is intended to give an overview of all of the basic commands that are required to create structures and associated documentation using the Autodesk
Fig. 9 Different weld positions. There are five basic types of common joints. They are
c) Vertical - On the wall d) Horizontal - On the wall Fig. 9 Different weld positions 7.0 TYPES OF JOINTS There are five basic types of common joints. They are Butt joint Lap joint T joint Corner joint,
TYPICAL PATIO COVERS. OWNER: ADDRESS: PHONE:
City of Aliso Viejo Building Division 12 Journey, Suite 100 Aliso Viejo, CA 92656 (949)425-2540 Fax (949)425-3899 www.cityofalisoviejo.com TYPICAL PATIO COVERS 111 I. GENERAL Patio covers are one-story,
THENI CE COMPUTER AIDED DESIGN & DRAFTING LABORATORY MANUAL
NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY THENI CE 6711 - COMPUTER AIDED DESIGN & DRAFTING LABORATORY MANUAL PREPARED BY RECOMMENDED BY APPROVED BY STAFF INCHARGE HOD/CIVIL PRINCIPAL GENERAL
13. Beam rebar arrangement
13. Beam rebar arrangement 1) Principle of beam rebar arrangement Calculate the size and depth of beams according to the drawing and arrange them in a suggested order, that is, exterior beams and big beams(g)
Structural Design And Drawing Reinforced Concrete And
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with structural design and
Listed below are the competencies required and examples from the aforementioned job:
1. Technical Analysis Instructions: Describe a project for which you collected and interpreted or analyzed technical data for development of engineering designs and drawings from concepts and specifications.
Slope Floor. Measurement Methods
Slope Floor Measurement Methods Many chair installations are on sloped floors. Hussey Seating uses five different feet for floor mount chairs based on the degree of slope. The slope of the floor is a critical
Dimension Below are the critical settings in AutoCAD. Other software should follow the same settings.
8.1 Drawing Standard 8.1.1 Introduction This drawing standard applies to all building drawings being prepared for the University of Calgary (UCalgary) by external consultants or vendors and internal staff
BUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT
BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota
WHY YOU SHOULD USE TUFFLOOR. components
Tuffloor DESIGN GUIDE WHY YOU SHOULD USE TUFFLOOR Strong and Easily Installed Tuffloor is a steel floor framing system designed for strength and ease of installation, and is an easy and economical alternative
Single-Family Dwelling Submittal Requirements
Single-Family Dwelling Submittal Requirements The purpose of this guideline is to assist our customers in preparing for plan submittal. The items listed must be included before your plans can be accepted
VOLUME V PART 8 STEEL BEAM WITH TIMBER DECK SUPERSTRUCTURE STANDARDS
VOLUME V PART 8 STEEL BEAM WITH TIMBER DECK SUPERSTRUCTURE STANDARDS VIRGINIA DEPARTMENT OF TRANSPORTATION COMMONWEALTH of VIRGINIA Gregory A. Whirley COMMISSIONER DEPARTMENT OF TRANSPORTATION 1401 EAST
AECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated
AECOsim Building Designer Quick Start Guide Chapter A08 Space Planning 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Space Planning...3 Sketches... 3 SpacePlanner... 4 Create
Innovative composite dowel for steel concrete composite bridges. Neil Westmacott, Wolfram Schwarz
Innovative composite dowel for steel concrete composite bridges Neil Westmacott, Wolfram Schwarz At a glance Cost effective alternative to prestressed bridge girders Introduction New to Australia although
A Productivity Comparison of AutoCAD and AutoCAD Architecture Software
AUTODCAD ARCHITECTURE A Productivity Comparison of and Software provides the best software-based design and documentation productivity for architects. This study details productivity gains over in designing
Scheme - G Sample Test Paper - I. Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV
Scheme - G Sample Test Paper - I Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV 17309 Semester : Third Subject Title : Building Drawing Marks : 25 Time: 1.30 hour Instructions: 1. All
i-models Kansas City Revit Users Group September, 2013
i-models Kansas City Revit Users Group September, 2013 Agenda i-model Definition Creation of i-models from Revit Reading an i-model Bentley Users collaborating with Revit Users Bentley View free Bentley
midas DShop Reinforcement Edit Function reflecting Constructability
01 Auto-generation of Structural Drawings 02 Structural drawings such as Framing plans, Sectional elevations, Beam/Column schedules, etc., are generated from the analysis & design results of midas Gen.
EDS GRID AND PRIMARY SUBSTATION CIVIL DESIGN STANDARDS
Document Number: EDS 07-0105 ENGINEERING DESIGN STANDARD EDS 07-0105 GRID AND PRIMARY SUBSTATION CIVIL DESIGN STANDARDS Network(s): Summary: EPN, LPN, SPN This design standard details the current civil
Effect of temperature on modal characteristics of steel-concrete composite bridges: Field testing
4th International Conference on Structural Health Monitoring on Intelligent Infrastructure (SHMII-4) 2009 Abstract of Paper No: XXX Effect of temperature on modal characteristics of steel-concrete composite
Plant & Process Electrical Design Introduction to I&W, promis e & BRCM
2014 Bentley Systems, Incorporated Plant & Process Electrical Design Introduction to I&W, promis e & BRCM Rick Black- Industry Sales Director - Electrical Group EMEA 3 WWW.BENTLEY.COM 2014 Bentley Systems,
This document has been carefully prepared with all the information needed to properly use this Advance product. This document contains a brief
This document has been carefully prepared with all the information needed to properly use this Advance product. This document contains a brief description of the software functions and is not a replacement
Agenda 2 Bentley Overview. Solutions. Bridges. Buildings 4 Bentley Overview
Agenda Attendees will learn about how to improve efficiencies by transferring AutoPLANT, PlantSpace, PDS and 3D CAD models to engineering analysis piping and structural models. A demonstration will be
PRODUCT INFORMATION Penco Wide-Span Shelving
PRODUCT INFORMATION Penco Wide-Span Shelving 2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email info@snyderequipment.com www.snyderequipment.com Wide Span Shelving Penco
INDEX. Initial SOL Approval. 1. Evergreen Retaining Wall System (Deleted) 3. Sound Barrier Walls (Deleted) Standard Details
INDEX Product 1. Evergreen Retaining Wall System (Deleted) 2. Precast Barlok Parapet 431-92-05 Drawing No. PADOT # 92-051-PE 3. Sound Barrier Walls (Deleted) Standard Details 4. Sound Zero Panel-Noise
THE ARTIST LIVE + WORK LOFTS
THE ARTIST LIVE + WORK LOFTS 2 3 4 x y 2x 3x 3y 4x 2500 5000 500 7050 2700 2244 Construction orth True orth A 5000 General otes: 4000 A Drawings are meant to be read, and not scaled Dimensions to be
ARCHITECTURE CADD Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing
Bentley's AECOsim Energy Simulator and What Next for Energy Simulation
Bentley's AECOsim Energy Simulator and What Next for Energy Simulation Drury B. Crawley, Ph.D., FASHRAE, BEMP, FIBPSA 26 January 2013 1 WWW.BENTLEY.COM 2013 Bentley Systems, Incorporated AECOsim Energy
GLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
SHD Expansion Joint (Slab-to-Slab Recessed with LokCrete)
OPTIONAL LOKCRETE ELASTOMERIC CONCRETE LEVELING BED TO CORRECT DEVIATIONS IN ELEVATION CHAMFER CONCRETE EDGE 0.25"(6mm) X 0.75"(19mm) STAINLESS STEEL SCREW * IMPORTANT DIMENSION - ACHEIVE REQUIRED DEPTH
CEMCON Tekla Structures. Cast In Place (Reinforced Concrete) Precast. Prithviraj CM
CEMCON-2013 Tekla Structures Cast In Place (Reinforced Concrete) Precast Prithviraj CM Disclaimer The information presented regarding future product features and functionalities is for informational purposes
SBA Technology by ZEMAN
1 THE FUTURE IS NOW 2 Revolution in steel-beam fabrication ZEMAN has developed a fully automated production line for practically any type of steel beam that includes add-on parts. Possible combinations
X11-Using the New Civil Geometry Tools
X11-Using the New Civil Geometry Tools Joe Waxmonsky, PE Bentley Civil 2010 Bentley Systems, Incorpo ora 2010 Bentley Systems, Incorpora 2010 Nordic Civil Geometry 2 WWW.BENTLEY.COM Roads and Bridges 2010
optimisation of pre-cast support beams
optimisation of pre-cast support beams Design Optimisation of Pre-cast Support Beams Investigation into pile and beam systems for a client in the civil engineering industry with the following objectives:
Appendix B Framing Component Installation Last updated 5/27/2013
Appendix B Framing Component Installation Last updated 5/27/2013 Apex Brace Installation Appendix B 1 Refer to apex connection detail on the engineering plans for the location of the apex brace. Refer
Big expertise. Real convenience. Concrete commitment. stem
1300 659 830 www.formdirect.com.au Big expertise. Real convenience. Concrete commitment. Stee l Pre-e P n g i n eere ly Fo conc d rete form, factory rmin ing s ystem built, re-u g sy sable stem Steel-Ply
SHED PACK. Sheds are commonly constructed using portal frames.
SHED PACK Sheds are commonly constructed using portal frames. This pack relates to purchasing portal frame purlin bracket sets. Ruest our free generic engineered and certified shed plans. SHED PACK Step
Applied Steel Detailing Tekla Structures 11.0 Basic Training February 10, 2005
Tekla Structures 11.0 Basic Training February 10, 2005 Copyright 2005 Tekla Corporation Contents Contents...i 1...3 1.1 AutoConnections...4 1.2 General about the Criteria for Creating Connections...6 1.3
Leveraging PLM Components to Advance World s Infrastructure
Leveraging PLM Components to Advance World s Infrastructure Sunand Sandurkar Director, Software Development 1 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated 2018 Bentley Systems, Incorporated Agenda
IDEA Connections. User guide
IDEA Connections user guide IDEA Connections User guide IDEA Connections user guide Content 1.1 Program requirements... 4 1.1 Installation guidelines... 4 2 User interface... 5 2.1 3D view in the main
TECHNICAL DRAWING GUIDE
Budapest University of Technology & Economics (BME) Faculty of Architecture Department of Building Constructions 2017 + TECHNICAL DRAWING GUIDE Edited by Dr Zsuzsanna Fülöp and Aryan Choroomi based on