Architect. Architect.

Size: px
Start display at page:

Download "Architect. Architect."

Transcription

1

2

3

4 The The line line sketch sketch with with modified modified height height for for plinth plinth floor floor is is displayed. displayed.

5 Open Open Architectural Architectural plan plan file, file, which which is is already already made made by by Architect. Architect.

6 Different Different types types of of wall wall shall shall be be drawn drawn in in different different layers. layers.

7 Hence, Hence, file file is is saved saved as as Sample-Typ-Arc.dxf Sample-Typ-Arc.dxf

8 Now, Now, Build-Quant Build-Quant reads reads drawings drawings prepared prepared in in AutoCAD. AutoCAD.

9

10

11

12 Single Single line line Architectural Architectural drawing drawing is is generated. generated.

13 View View numbers numbers of of Single Single line line Architectural Architectural drawing, drawing, using using small small particular particular window. window.

14

15

16

17

18 Open Open RCC RCC Plan Plan drawing drawing in in AutoCAD AutoCAD

19 The The slab slab area area shall shall be be marked marked by by two two cross cross lines lines which which shall shall be be connected connected to to corners corners of of slab. slab. The The slab slab number number text text shall shall be be marked marked at at intersection intersection of of slab slab cross cross lines. lines.

20 Hence, Hence, save save as as Sample-Typ-RCC.dxf Sample-Typ-RCC.dxf

21

22 Enter Enter RCC RCC Parameters Parameters in in Edit Edit RCC RCC Parameters Parameters option. option.

23 Mentioned Mentioned layer layer names names on on which which beam beam double double lines lines are are drawn drawn in in original original RCC RCC plan. plan.

24 Enter Enter layer layer names names on on which which slab slab lines lines are are drawn drawn in in original original RCC RCC plan. plan.

25 Edit Edit RCC RCC Rates Rates option option is is used used to to change change rates rates of of Concrete Concrete and and Steel. Steel.

26 RCC RCC Parameters Parameters option option is is to to change change RCC RCC parameters parameters ( ( e.g. e.g. Columns, Columns, Beams, Beams, Slabs, Slabs, Footings Footings etc.) etc.) required required for for quality quality estimation. estimation.

27 RCC RCC Single Single Line Line option option generates generates RCC RCC single single line line drawing drawing using using original original RCC RCC drawing drawing Slab Slab boundaries boundaries are are shown shown in in blue blue colures. colures.

28 Details Details of of Single Single Line Line RCC RCC drawing. drawing. Different Different layers layers are are shown shown in in different different colures. colures.

29 Select Select Insert Insert Group Group option option to to add add a a new new row row at at a a desired desired location location in in schedule. schedule.

30 To To save save data, data, press press Save Save option. option.

31 The The slab slab schedule schedule consist consist of of slab slab numbers, numbers, thickness thickness of of slab, slab, reinforcement reinforcement details details etc. etc.

32 Select Select Sketch Sketch option. option. A A detailed detailed slab slab sketch sketch can can be be viewed viewed by by selecting selecting option option Sketch. Sketch.

33 The The Beam Beam / / Slab Slab quantity quantity report report is is generated. generated.

34

35

36

37

38 To To copy copy Floor, Floor, click click on on Copy Copy Floor Floor option option in in Utilities Utilities menu. menu.

39 The The Column Column schedule schedule consists consists of of data data about about column column numbers, numbers, size size of of columns, columns, reinforcement reinforcement details, details, etc. etc.

40 Click Click on on Edit Edit Group Group button. button. This This button button is is used used to to edit edit data data of of a a particular particular group. group.

41 The The Footing Footing schedule schedule consists consists of of data data about about footing footing numbers, numbers, size size of of footings, footings, reinforcement reinforcement details, details, etc. etc.

42 Click Click on on Edit Edit Group Group button. button. This This button button is is used used to to edit edit data data of of a a particular particular group. group.

43

44

45

46

47 Select Select All All Floors Floors option option to to get get Project Project quantities. quantities.

48

49

50

51

52

53

54

55

56

57

58

59

Auto-drafting Module for midas Gen MIDAS Information Technology Co., Ltd.

Auto-drafting Module for midas Gen MIDAS Information Technology Co., Ltd. MIDAS Information Technology Co., Ltd. 01 Introduction midas DShop empowers engineers to streamline the design process all the way to generating engineering drawings. midas DShop imports models complete

More information

midas DShop Reinforcement Edit Function reflecting Constructability

midas DShop Reinforcement Edit Function reflecting Constructability 01 Auto-generation of Structural Drawings 02 Structural drawings such as Framing plans, Sectional elevations, Beam/Column schedules, etc., are generated from the analysis & design results of midas Gen.

More information

Applied Precast Concrete Detailing

Applied Precast Concrete Detailing Applied Precast Concrete Detailing Tekla Structures 11.0 August 30, 2005 Copyright 2005 Tekla Corporation Copyright 2005 Tekla Corporation Applied Precast Concrete Detailing i Copyright 2005 Tekla Corporation

More information

Advance Concrete. Tutorial

Advance Concrete. Tutorial Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances

More information

EstimaXpro. S&R Consultants

EstimaXpro. S&R Consultants EstimaXpro S&R Consultants Contents 1. Introduction... 5 2. Masters... 7 2.1 Project Details... 7 2.2 Storey Details... 8 2.3 Joinery Details... 8 2.4 Rate types... 9 2.5 Rates... 9 2.6 Rate Analysis Type...

More information

WINTER 15 EXAMINATIONS Subject Code: Model Answer- Building Drawing Page No- 01 /15

WINTER 15 EXAMINATIONS Subject Code: Model Answer- Building Drawing Page No- 01 /15 Subject Code: 17309 Model Answer- Building Drawing Page No- 01 /15 Important Instruction to Examiners:- 1) The answers should be examined by key words & not as word to word as given in the model answers

More information

Drawing a Foundation or Basement Plan

Drawing a Foundation or Basement Plan Appendix F Drawing a Foundation or Basement Plan In this chapter, you will learn the following to World Class standards: Draw a Foundation or Basement Plan Draw the Basement Walls Draw the Pilasters on

More information

Scheme - G Sample Test Paper - I. Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV

Scheme - G Sample Test Paper - I. Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV Scheme - G Sample Test Paper - I Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV 17309 Semester : Third Subject Title : Building Drawing Marks : 25 Time: 1.30 hour Instructions: 1. All

More information

Number Object Category Attribute Name Explanation Examples Further comments

Number Object Category Attribute Name Explanation Examples Further comments 1 STORY 2 GRID 3 COLUMN 2 Story Elevation Absolute elevation for story (the name "story" is prefered over "level", as level is used in e.g. Revit Typically, our elevations for a project are all relative

More information

1Getting set up to start this exercise

1Getting set up to start this exercise AutoCAD Architectural DesktopTM 2.0 - Development Guide EXERCISE 1 Creating a Foundation Plan and getting an overview of how this program functions. Contents: Getting set up to start this exercise ----

More information

Drawing a Living Room and Family Room Floorplan

Drawing a Living Room and Family Room Floorplan Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs

More information

Installation Instructions

Installation Instructions Column & Beam Units with Debris Netting Installation Instructions Laminated Wood Systems, Inc. Seward, Nebraska 800-949-3526 2015 LWS, INC. AVR-NET INSTALL 05-12-16 AVR Installation Notes 1 Safety The

More information

Dimension Below are the critical settings in AutoCAD. Other software should follow the same settings.

Dimension Below are the critical settings in AutoCAD. Other software should follow the same settings. 8.1 Drawing Standard 8.1.1 Introduction This drawing standard applies to all building drawings being prepared for the University of Calgary (UCalgary) by external consultants or vendors and internal staff

More information

Table of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7

Table of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10

More information

Moebius Soft. Manual. Design of concrete reinforcement.

Moebius Soft. Manual. Design of concrete reinforcement. Manual Moebius Soft Design of concrete reinforcement. Index 1. Introduction 1.1 Description and consulted codes 1.2 Definitions 1.3 Parameters of a reinforcing bar schedule 1.4 Reinforcing bar schedule

More information

Release Notes - Fixes in Tekla Structures 2016i PR1

Release Notes - Fixes in Tekla Structures 2016i PR1 Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups

More information

BIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010

BIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010 BIM e Submission Guideline Structural Annex 1a Recommended Process Revit 2010 Building and Construction Authority 5 Maxwell Road #16-00 Tower Block MND Complex Singapore 069110 www.bca.gov.sg Revision

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

Release Notes - Fixes in Tekla Structures 2016i SP1

Release Notes - Fixes in Tekla Structures 2016i SP1 Release Notes - Fixes in Tekla Structures 2016i SP1 is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups instead of tapered groups., the

More information

Working with Detail Components and Managing DetailsChapter1:

Working with Detail Components and Managing DetailsChapter1: Chapter 1 Working with Detail Components and Managing DetailsChapter1: In this chapter, you learn how to use a combination of sketch lines, imported CAD drawings, and predrawn 2D details to create 2D detail

More information

midas Dshop (Basic Tutorial) Basic Tutorial Reinforced Concrete Structure - 1 -

midas Dshop (Basic Tutorial) Basic Tutorial Reinforced Concrete Structure - 1 - midas Dshop (Basic Tutorial) midas DrawingShop Basic Tutorial Reinforced Concrete Structure - 1 - Index Ch.1 Summary of Design 1. Summary of Building Model 2. Standards of Structural Design 3. Structural

More information

Revit Structure 2013 Basics

Revit Structure 2013 Basics Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial

More information

Revit Structure 2014 Basics

Revit Structure 2014 Basics Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

www.cad-designers.com Staffing Services Cad Designers is an established staffing company that specializes in providing professional support for the A/E/C industry. All candidates are screened with a complete

More information

Vectorworks Architect Tutorial Manual by Jonathan Pickup. Sample

Vectorworks Architect Tutorial Manual by Jonathan Pickup. Sample Vectorworks Architect Tutorial Manual by Jonathan Pickup Table of Contents Introduction...iii Step 1 Layer and Model Setup... 1 Document Setup...1 Layer Setup (Model Setup)...7 Step 2 Property Line...

More information

HAYES VALLEY PLAYGROUND AND CLUBHOUSE PROJECT NO.: SAN FRANCISCO PARKS AND RECREATIONS SAN FRANCISCO, CA

HAYES VALLEY PLAYGROUND AND CLUBHOUSE PROJECT NO.: SAN FRANCISCO PARKS AND RECREATIONS SAN FRANCISCO, CA HAYES VALLEY PLAYGROUND AND CLUBHOUSE PROJECT NO.: 08012.00 SAN FRANCISCO PARKS AND RECREATIONS SAN FRANCISCO, CA ADDENDUM NUMBER 1 to the BID SET August 10, 2009 General This Addendum will become part

More information

Slope Floor. Measurement Methods

Slope Floor. Measurement Methods Slope Floor Measurement Methods Many chair installations are on sloped floors. Hussey Seating uses five different feet for floor mount chairs based on the degree of slope. The slope of the floor is a critical

More information

Interference? Verify and Analyze This!

Interference? Verify and Analyze This! 11/30/2005-3:00 pm - 4:30 pm Room:N. Hemispheres (Salon A2) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida David Butts - CADRE Systems Inc. ME34-1 In Autodesk Building Systems you

More information

Assignment 13 CAD Mechanical Part 2

Assignment 13 CAD Mechanical Part 2 Assignment 13 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hatch and break commands along with commands previously learned. General Instructions Hatching 1. When AutoCAD's

More information

Section 1 REBAR ARRANGEMENT & CONSTRUCTION CARRYOUT

Section 1 REBAR ARRANGEMENT & CONSTRUCTION CARRYOUT Section 1 REBAR ARRANGEMENT & CONSTRUCTION CARRYOUT 1. Understanding of Drawing 1) Examination of drawing When construction contract is completed, the contents of the drawings are surveyed and checked

More information

Autodesk Architectural Desktop Functionality for the Autodesk Building Systems User

Autodesk Architectural Desktop Functionality for the Autodesk Building Systems User 11/28/2005-1:00 pm - 2:30 pm Room:N. Hemispheres (Salon A1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Architectural Desktop Functionality for the Autodesk Building Systems

More information

This document has been carefully prepared with all the information needed to properly use this Advance product. This document contains a brief

This document has been carefully prepared with all the information needed to properly use this Advance product. This document contains a brief This document has been carefully prepared with all the information needed to properly use this Advance product. This document contains a brief description of the software functions and is not a replacement

More information

Listed below are the competencies required and examples from the aforementioned job:

Listed below are the competencies required and examples from the aforementioned job: 1. Technical Analysis Instructions: Describe a project for which you collected and interpreted or analyzed technical data for development of engineering designs and drawings from concepts and specifications.

More information

Appendix to Chapter 1 Release 3

Appendix to Chapter 1 Release 3 Appendix to Chapter 1 Release 3 Introduction to AutoCAD Architectural Desktop Release 3 Enhancements to AutoCAD Architectural Desktop Release 3 include changes in the content of the menu bar, toolbars,

More information

Arranging and Patterning Objects

Arranging and Patterning Objects C H A P T E R Arranging and Patterning Objects Learning Objectives After completing this chapter, you will be able to do the following: Relocate objects using the MOVE tool. Change the angular positions

More information

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC certified)

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC certified) MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC -270001 2005 certified) SUMMER -2017 EXAMINATION Subject code: Model Answer Page No: 01/13 Important Instructions to examiners: 1) The

More information

12. Pillar rebar arrangement

12. Pillar rebar arrangement 12. Pillar rebar arrangement 1) Indication of pillar(c) Main bar drawing - It indicates the length of span by the criterion of pillar and wall, etc. and indicates the position of pillar & wall.

More information

ROOM smooth cement f.f FLOOR LAYOUT

ROOM smooth cement f.f FLOOR LAYOUT 3,300 3,600 4,100 2,159 1,000 1,241 ROOM smooth cement f.f 168 900 1,091 1,000 1,241 4,400 FLOOR LAYOUT FLOOR LAYOUT CARTAKERS ROOM 2,159 1,000 1,241 SOUTH ELEVATION EAST ELEVATION 1,241 1,000 1,091 900

More information

ARCHITECTURE CADD Course Syllabus

ARCHITECTURE CADD Course Syllabus 6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing

More information

ProConcrete. Gernot Jeromin Product Manager Bentley Systems, Incorporated

ProConcrete. Gernot Jeromin Product Manager Bentley Systems, Incorporated ProConcrete Gernot Jeromin Product Manager ProConcrete 3D CAD Software for Concrete and Reinforcement 2 WWW.BENTLEY.COM What is ProConcrete AutoCAD Application MicroStation V8i version will be available

More information

Symbols and Standards (Architectural CAD)

Symbols and Standards (Architectural CAD) Design and Drafting Description In this activity the teacher will give an orientation to the symbols and conventions of Architectural CAD. Industry common symbols are used for most of the fixtures and

More information

MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS

MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS WHAT S INSIDE INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 1 OVERVIEW 1 SETTING UP LAYERS AND CLASSES 1 CREATING OBJECT

More information

Basic tools. In this tutorial you will study how to: House for Living-2008 Arh. AART Architects

Basic tools. In this tutorial you will study how to: House for Living-2008 Arh. AART Architects Basic Tools Basic tools House for Living-2008 Arh. AART Architects Home for Life is designed as the world s first Active House and sets new standards for combining energy-efficient solutions with a healthy

More information

Completed project drawing (dimensions added for reference)

Completed project drawing (dimensions added for reference) CHAPTER 5 Fundamentals IV PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in the accompanying figure.

More information

User s Manual ❿ Drawings-Detailing

User s Manual ❿ Drawings-Detailing User s Manual ❿ Drawings-Detailing 2 CONTENTS I. THE NEW UPGRADED INTERFACE of SCADA Pro 4 1. UNITS 5 1.1 Drawings-Detailing 5 I. Files 6 II. Drawing 25 III. Formworks 30 IV. Edit 45 V. View 58 VI. Layers

More information

Chief Architect New Feature List

Chief Architect New Feature List SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files

More information

ADDENDUM #1. April 29, 2009

ADDENDUM #1. April 29, 2009 April 29, 2009 Re: HACC, Central Pennsylvania s Community College Midtown 1 CCTA Phase 2 Solicitation # 09-17 From: Eastern pcm, LLC Construction Manager HACC 212 Locust Street, Suite 604 Harrisburg, PA

More information

Project Booklet. Structural Drafting with AutoCAD

Project Booklet. Structural Drafting with AutoCAD Project Booklet Structural Drafting with AutoCAD Introduction 1 General Setup 2 Border and Title Block 3 Drafting the Foundation Plan (Plate 1) 8 Drafting the South Elevation (Plate 2) 11 Drafting Section

More information

Placing Notes on the Rectangular Problem

Placing Notes on the Rectangular Problem C h a p t e r 4 Placing Notes on the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Use the tools and toolbar for simple 2D Computer Aided Drafting (CAD)

More information

Introduction to QTO. Objectives of QTO. Getting Started. Requirements. Creating a Bill of Quantities. Updating an existing Bill of Quantities

Introduction to QTO. Objectives of QTO. Getting Started. Requirements. Creating a Bill of Quantities. Updating an existing Bill of Quantities QTO User Manual Contents Introduction to QTO... 5 Objectives of QTO... 5 Getting Started... 5 QTO Manager... 6 QTO Layout... 7 Bill of Quantities... 8 Measure Folders... 9 Drawings... 10 Zooming and Scrolling...

More information

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR -SQA-SCOTTISH QUALIFICATIONS AUTHORITY Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR -Module Number- 0065213 -Session-1986-87 -Superclass- -Title- TM STRUCTURAL

More information

BUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT

BUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota

More information

AutoCAD Architecture 2014

AutoCAD Architecture 2014 CADLearning for AutoCAD Architecture 2014 Course Details 19+ hours of training 325 video tutorials Exercise files included Instructor: Reid Addis Course Description CADLearning for AutoCAD Architecture

More information

CADPIPE Industrial Pipe. Tutorial

CADPIPE Industrial Pipe. Tutorial CADPIPE Industrial Pipe Tutorial Introduction This Tutorial is a brief introduction to the power of CADPIPE 3D DESIGN. We will show you a few key features and the general procedures for creating 3D piping

More information

SolidWorks 103: Barge Design Challenge

SolidWorks 103: Barge Design Challenge SolidWorks 103: Barge Design Challenge Note: This tutorial was created using SolidWorks 2009. If you are using another version of SolidWorks, you may notice some variation in display states and configuration.

More information

Making an Architectural Drawing Template

Making an Architectural Drawing Template C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards:! Starting from Scratch for the Last time! Creating

More information

There are two types of cove light in terms of light distribution inside a room

There are two types of cove light in terms of light distribution inside a room DIALux evo Tutorials Tutorial 2 How to create a cove light detail In this tutorial you will learn the following commands. 1. Using help lines 2. Using ceiling. 3. Using cutout 4. Using Boolean operation

More information

Cast Unit Drawings Tekla Structures 11.0 Basic Training August 25, 2005

Cast Unit Drawings Tekla Structures 11.0 Basic Training August 25, 2005 Tekla Structures 11.0 Basic Training August 25, 2005 Copyright 2005 Tekla Corporation Contents 11... 3 11.1 Create...4 Define cast unit drawing properties for beams...4 Create a cast unit drawing for a

More information

WALL TO FABRICATED FLOOR

WALL TO FABRICATED FLOOR WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN

More information

READING ARCHITECTURAL PLANS

READING ARCHITECTURAL PLANS READING ARCHITECTURAL PLANS ARCHITECTURAL DRAWINGS FOR A HOUSE Architectural drawings contain information about the size, shape, and location of all parts of the house ARCHITECTURAL DRAWINGS FOR A HOUSE

More information

A Productivity Comparison of AutoCAD and AutoCAD Architecture Software

A Productivity Comparison of AutoCAD and AutoCAD Architecture Software AUTODCAD ARCHITECTURE A Productivity Comparison of and Software provides the best software-based design and documentation productivity for architects. This study details productivity gains over in designing

More information

CSiDETAILER USER S MANUAL. Detailing and Drawing of Structural Members. Computers and Structures, Inc. Berkeley, California, USA

CSiDETAILER USER S MANUAL. Detailing and Drawing of Structural Members. Computers and Structures, Inc. Berkeley, California, USA CSiDETAILER Detailing and Drawing of Structural Members USER S MANUAL Computers and Structures, Inc. Berkeley, California, USA Version 8.00 August 2004 COPYRIGHT The computer program CSiDETAILER and all

More information

CGN 2328 Lab H. AutoCAD 2-D Notes Set #8

CGN 2328 Lab H. AutoCAD 2-D Notes Set #8 Key Topics CGN 2328 Lab H AutoCAD 2-D Notes Set #8 In this module, we will cover several AutoCAD tools and settings: 1. Printing or plotting your drawing. 2. Configuring model space and paper space layouts:

More information

Module 1: Styles and Advanced Object Tools

Module 1: Styles and Advanced Object Tools Module 1: Styles and Advanced Object Tools This module contains: Section 1: General Style Information Using the Style Manager General Style Properties Working with Materials Classifications Display Properties

More information

Vectorworks Essentials

Vectorworks Essentials by Jonathan Pickup fourth edition written with version 2012 Vectorworks Essentials Tutorial Manual Contents 0.0 Introduction... iii 0.1 How to Use this Manual... iv 0.2 What s in This Manual... v 0.3 New

More information

Creating a 3D Assembly Drawing

Creating a 3D Assembly Drawing C h a p t e r 17 Creating a 3D Assembly Drawing In this chapter, you will learn the following to World Class standards: 1. Making your first 3D Assembly Drawing 2. The XREF command 3. Making and Saving

More information

Residential Room Addition / Remodel Submittal Requirement Checklist

Residential Room Addition / Remodel Submittal Requirement Checklist City of Elko Building Department 1753 College Avenue Elko, Nevada 89801 (775) 777-7220 fax (775) 777-7229 Residential Room Addition / Remodel Submittal Requirement Checklist TWO COMPLETE SETS OF PROPERLY

More information

Chapter 6 Title Blocks

Chapter 6 Title Blocks Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers

More information

MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS

MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS TABLE OF CONTENTS INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 2 OVERVIEW 2 SETTING UP LAYERS AND CLASSES 2 CREATING

More information

CAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block

CAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details

More information

Sheet Metal OverviewChapter1:

Sheet Metal OverviewChapter1: Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements

More information

Create a Simple Architectural Structure (Architectural CAD)

Create a Simple Architectural Structure (Architectural CAD) Description In this activity the teacher will demonstrate how to transform the 2D floor plan into a 3D structure, using the plan created in the Drawing of a Simple Building activity. Lesson Objectives

More information

IDEA CSS 7 General cross-section

IDEA CSS 7 General cross-section IDEA CSS User Guide IDEA CSS 7 General cross-section User guide IDEA CSS User Guide Content 1.1 Program requirements... 3 1.2 Installation guidelines... 3 2 Basic Terms... 4 3 User interface... 5 3.1 Control

More information

Rhinoceros modeling tools for designers. Using Layouts in Rhino 5

Rhinoceros modeling tools for designers. Using Layouts in Rhino 5 Rhinoceros modeling tools for designers Using Layouts in Rhino 5 RH50-TM-LAY-Apr-2014 Rhinoceros v5.0, Layouts, Training Manual Revised April 8, 2014, Mary Fugier mary@mcneel.com Q&A April 8, 2014, Lambertus

More information

10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS

10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS 10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS 10x12 WOOD SKID FLOOR FLOOR SYSTEM FOR 10x12 TRICO AND FLORA SHEDS RAW MATERIALS LIST: 2 (9) FLOOR FRAMING AND SHEATHING: 1) BAND BOARD 2 x 6 x 12 PRESSURE

More information

EPS to Rhino Tutorial.

EPS to Rhino Tutorial. EPS to Rhino Tutorial. In This tutorial, I will go through my process of modeling one of the houses from our list. It is important to begin by doing some research on the house selected even if you have

More information

Architectural Floor Plan Symbols

Architectural Floor Plan Symbols Architectural Floor Plan Symbols The symbols below are used in architectural floor plans. Every office has their own standard, but most symbols should be similar to those shown on this page. Building Section

More information

Substation 33/11kV. General Notes. Drawn by: Hewa Qader Mustafa. Soran Rostam Aziz. C-For footings = 75 mm. B-For beams & columns = 40 mm.

Substation 33/11kV. General Notes. Drawn by: Hewa Qader Mustafa. Soran Rostam Aziz. C-For footings = 75 mm. B-For beams & columns = 40 mm. General Notes Unless otherwise noted, All the dimensions are given in meter. Do not scale from these drawings. These drawings are proposed drawings. All structural drawings should be read in conjunction

More information

COURSE OUTLINE. Course Number Course Title Credits. Co- or Pre-requisite BCT110 Construction Materials & Methods

COURSE OUTLINE. Course Number Course Title Credits. Co- or Pre-requisite BCT110 Construction Materials & Methods COURSE OUTLINE Course Number Course Title Credits BCT101 Construction Graphics 3 Hours: 2 Lecture 2 Studio/Lab, Co- or Pre-requisite BCT110 Construction Materials & Methods Implementation sem/year Fall

More information

PEDESTAL INSTALLATION. Guidelines for installing adjustable height pedestals

PEDESTAL INSTALLATION. Guidelines for installing adjustable height pedestals BASIC REQUIREMENTS Irrespective of the type of pavers or tiles that will be installed over pedestals, the following basic requirement must be met. Decks must be designed not to exceed the load capacity

More information

Landscaping Tutorial

Landscaping Tutorial Landscaping Tutorial This tutorial describes how to use Home Designer Architectural s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features,

More information

AECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated

AECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated AECOsim Building Designer Quick Start Guide Chapter A08 Space Planning 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Space Planning...3 Sketches... 3 SpacePlanner... 4 Create

More information

Single-Family Dwelling Submittal Requirements

Single-Family Dwelling Submittal Requirements Single-Family Dwelling Submittal Requirements The purpose of this guideline is to assist our customers in preparing for plan submittal. The items listed must be included before your plans can be accepted

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

Assignment 6 CAD Mechanical Part 1 Editing Tools Objectives

Assignment 6 CAD Mechanical Part 1 Editing Tools Objectives Assignment 6 CAD Mechanical Part 1 Editing Tools Objectives In this assignment you will apply the explode and rectangular array commands, as well as skills learned in earlier assignments. Getting Started

More information

Subject Description Form

Subject Description Form Subject Description Form Subject Code Subject Title Credit Value BRE222 Workshop Practices and Draftsmanship 3 Academic Credits Level 2 Pre-requisite/ Co-requisite/ Exclusion Objectives Nil 1) Provide

More information

Finite Element Study of Using Concrete Tie Beams to Reduce Differential Settlement Between Footings

Finite Element Study of Using Concrete Tie Beams to Reduce Differential Settlement Between Footings Finite Element Study of Using Concrete Tie Beams to Reduce Differential Settlement Between Footings AMIN H. ALMASRI* AND ZIAD N. TAQIEDDIN** *Assistant Professor, Department of Civil Engineering, Jordan

More information

This document has been very carefully prepared in the hope to meet your expectations and to answer all your questions regarding Advance.

This document has been very carefully prepared in the hope to meet your expectations and to answer all your questions regarding Advance. Advance User Guide This document has been very carefully prepared in the hope to meet your expectations and to answer all your questions regarding Advance. This document contains only a brief description

More information

Converting a solid to a sheet metal part tutorial

Converting a solid to a sheet metal part tutorial Converting a solid to a sheet metal part tutorial Introduction Sometimes it is easier to start with a solid and convert it to create a sheet metal part. This tutorial will guide you through the process

More information

STRUCTURAL WOOD DETAILING IN CAD FORMAT

STRUCTURAL WOOD DETAILING IN CAD FORMAT STRUCTURAL WOOD DETAILING IN CAD FORMAT STRUCTURAL WOOD DETAILING IN CAD FORMAT K.A. ZAVAT lnm51springer Science+Business ~---Media, LLC Copyright 1993 by Springer Science+Business Media New York Originally

More information

Block References and Attributes

Block References and Attributes CHAPTER 11 Block References and Attributes PROJECT EXERCISE 11A This project exercise provides point-by-point instructions for creating the objects shown in Figure P11A 1. In this exercise, you will apply

More information

Landscaping Tutorial. Chapter 5:

Landscaping Tutorial. Chapter 5: Chapter 5: Landscaping Tutorial This tutorial was written to help you learn how to use Home Designer Landscape and Deck s Terrain tools. In this tutorial, you will learn how to add elevation information

More information

HIA AIR CARGO HAMILTON ADDENDUM #3. Addendum No. A03 (Architectural) o Text 1 page o SK-10a o SK-10b o SK-11

HIA AIR CARGO HAMILTON ADDENDUM #3. Addendum No. A03 (Architectural) o Text 1 page o SK-10a o SK-10b o SK-11 HIA AIR CARGO HAMILTON ADDENDUM # (This Addendum consists of six () pages) Cover sheet Schedule time lines for Architectural Precast, Miscellaneous Metals, Insulated Metal Panels, Roofing and Aluminum

More information

5 5 8 " 60" 53 8 " " 7" 5 1 2" 7" " FIVE MODELS TO MEET YOUR DESIGN REQUIREMENTS.

5 5 8  60 53 8   7 5 1 2 7  FIVE MODELS TO MEET YOUR DESIGN REQUIREMENTS. Installation Manual GIRT LAMINATEDATED WOOD COLUMN 1/4" SCREW 1/2" BOLT STRUCTURAL REINFORCING BRACKET SKIRT BOARD 10,000 PSI PRECAST CONCRETE CONTINUOUS STEEL REINFORCEMENT GALV VANIZED STEEL UPLIFT ANCHORS

More information

Always be your solar support

Always be your solar support Always be your solar support Installation Manual CG ground mounting system Version 2016 1.0 www.antaisolar.com Contents 一.Product Introduction... 2 二.Installation Tools & Equipment... 3 三.System Components...

More information

Sheet Metal OverviewChapter1:

Sheet Metal OverviewChapter1: Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements

More information

Total precast solution for large stadium projects meet tight schedule

Total precast solution for large stadium projects meet tight schedule Tailor Made Concrete Structures Walraven & Stoelhorst (eds) 2008 Taylor & Francis Group, London, ISBN 978-0-415-47535-8 Total precast solution for large stadium projects meet tight schedule T.J. D Arcy

More information

7/9/2009. Offset Tool. Offset Tool. Offsetting - Erasing the Original Object. Chapter 8 Construction Tools and Multiview Drawings

7/9/2009. Offset Tool. Offset Tool. Offsetting - Erasing the Original Object. Chapter 8 Construction Tools and Multiview Drawings Chapter 8 Construction Tools and Multiview Drawings Use the OFFSET tool to draw parallel lines and curves. Mark points on objects at equal lengths using the DIVIDE tool. Set designated increments on an

More information

ACAD-BAU TUTORIAL For BricsCAD platform

ACAD-BAU TUTORIAL   For BricsCAD platform ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.

More information

Landscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan

Landscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan Landscaping Tutorial This tutorial describes how to use Home Designer Pro s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features, and how

More information