and signalling units Ø 22 1 Harmony XB7 Monolithic pushbuttons, switches and pilot lights
|
|
- Lee Albert Nelson
- 5 years ago
- Views:
Transcription
1 Characteristics 1 Environment Protective treatment Standard version TH Ambient air temperature Storage C around the device Operation C for LED and neon bulb versions for incandescent bulb version Electric shock protection Conforming to IEC Class II Degree of protection Conforming to IEC IP 54 front face IP 20 rear face (protection against direct contact) Conforming to NEMA NEMA type 12 Mounting Conforming to IEC/EN Finished fixing hole: 22.5 mm recommended ( / 0) Fixing centres: 30 x 40 mm min. (unless otherwise indicated) Mounting panel thickness: metal: 1 to 6 mm, double insulated: 2 to 6 mm Recommended tightening torque of fixing nut: 2 N.m. max.: 3 N.m Cabling capacity Conforming to EN Screw clamp terminal connections: v min.: 1 x 0.34 mm 2 without cable end v max.: 2 x 1.5 mm 2 with cable end Forked "U" tag connectors: 2 max., fitted head to tail Fork width 6 to 7.5 mm for M3.5 screw Faston connectors: type 6.35 x 0.8 mm Screw clamp tightening torque N.m 0.8 (nominal recommended) 1.2 (max) Screw heads compatible with Pozidriv or Phillips or JIS screwdrivers (size 1) and flat screwdrivers (4 and 5.5 mm) Mechanical durability (in operating cycles) Pushbuttons: Illuminated pushbuttons, spring return: Illuminated pushbuttons, push-push: Selector switches: Key switches: Emergency stop pushbuttons: ibration resistance Conforming to IEC gn (frequency 2 at 500 Hz) Electric shock resistance Conforming to IEC gn (half sine wave for 11 ms) Emergency stop: 10 gn (half sine wave for 11 ms) Conforming to standards Generic standards IEC/EN , IEC/EN , IEC/EN UL 508, CSA C22 n 14, JIS C 4520 (pending) Terminal referencing Conforming to EN and EN Conforming Contact block characteristics Type of contact N/C or N/O or C/O Slow break Positive operation Conforming to IEC/EN All functions incorporating an N/C contact have positive opening operation appendix K Short-circuit protection Conforming to IEC/EN A 4 (gg cartridge fuse conforming to IEC 269-1) Rated insulation voltage Conforming to IEC/EN Ui = 250 (degree of pollution 3) Rated impulse withstand voltage Rated operational characteristics (conforming to IEC/EN ) Electrical reliability Conforming to IEC/EN k Uimp = 6 a.c. supply: utilisation category AC14, D300 Failure rate conforming to IEC Single light block characteristics Ue = 240 and Ie = 0.3 A or Ue = 120 and Ie = 0.6 A At 17 and 5 ma: λ y 10-6 Type of bulb LED Incandescent (all models) oltage limits For rated voltage 24 z : c; a 120 a: a a: a 120 a: a 230 a: a Current consumption Applicable to all colours ma 18 Depending on bulb < 5 (all types, all voltages) Service life At rated voltage and at an H ambient temperature of 25 C Electromagnetic emissions Conforming to IEC Class B Neon (direct) Direct supply model: 230 a: a References: pages 35019/3 to 35019/ EN_er9.1.fm/2
2 References 1 XB7 EAp1P Pushbuttons Type Type of contact Marking N/O N/C C/O Text Pushbuttons, spring return Flush 1 Black 10 XB7 EA21P (1) Green 10 XB7 EA31P (1) Yellow 10 XB7 EA51P (1) Red 10 XB7 EA42P (1) Black 10 XB7 EA25P Green 10 XB7 EA35P Red 10 XB7 EA45P Black 10 XB7 EA23P Green 10 XB7 EA33P Flush 1 I White Green 10 XB7 EA3131P XB7 EA3331P Projecting 1 O White Red 10 XB7 EL4232P XB7 EL4532P Flush 1 A Black White 10 XB7 EA11341P XB7 EA15341P Flush 1 A White Black 10 XB7 EA21341P XB7 EA25341P Pushbuttons, push-push Flush 1 Black 10 XB7 EH21P Green 10 XB7 EH31P Black 10 XB7 EH25P Green 10 XB7 EH35P XB7 ED21P Selector switches Type of operator Standard handle, black Key switches (key n 455) Type of contact Number N/O N/C C/O and type of positions (2) stay put 10 XB7 ED21P (1) stay put 10 XB7 ED25P stay put 10 XB7 ED33P withdrawal from LH position withdrawal from centre position 10 XB7 EG21P XB7 EG33P XB7 EG33P Emergency stop mushroom head pushbuttons, Ø 40 Type Type of contact N/O N/C C/O Turn to release 1 Red 10 XB7 ES542P XB7 ES542P Turn to release (key n 455) 1 1 Red 10 XB7 ES545P Red 10 XB7 ES142P Red 10 XB7 ES145P (1) For version with Faston connectors (1 x 6.35 mm and 2 x 2.8 mm), add suffix 3 to the above s. Example: XB7 EA21P3. (2) The symbol indicates the key withdrawal position EN_er9.1.fm/3
3 References (continued) 1 XB7 E0ppP Pilot lights with integral LED ("true" colours) Supply voltage of lens z 24 White 10 XB7 E01BP (1) Green 10 XB7 E03BP (1) Red 10 XB7 E04BP (1) Yellow 10 XB7 E05BP (1) Blue 10 XB7 E06BP (1) Orange 10 XB7 E08BP (1) r a Hz Hz White 10 XB7 E01GP (1) Green 10 XB7 E03GP (1) Red 10 XB7 E04GP (1) Yellow 10 XB7 E05GP (1) Blue 10 XB7 E06GP (1) Orange 10 XB7 E08GP (1) White 10 XB7 E01MP (1) Green 10 XB7 E03MP (1) Red 10 XB7 E04MP (1) Yellow 10 XB7 E05MP (1) Blue 10 XB7 E06MP (1) Orange 10 XB7 E08MP (1) Illuminated pushbuttons with integral LED ("true" colours) of Type Supply voltage Type of contact head of lens N/O N/C Illuminated pushbuttons, spring return Projecting c 24 1 Green 10 XB7 EW33B1P Red 10 XB7 EW34B1P Yellow 10 XB7 EW35B1P XB7 EW3pp1P 1 Red 10 XB7 EW34B2P Green 10 XB7 EW33M1P Red 10 XB7 EW34M1P Yellow 10 XB7 EW35M1P Red 10 XB7 EW34M2P Illuminated pushbuttons, push-push Projecting c 24 1 Green 10 XB7 EH03B1P Red 10 XB7 EH04B1P Yellow 10 XB7 EH05B1P XB7 EH0pp1P 1 Red 10 XB7 EH04B2P Green 10 XB7 EH03M1P Red 10 XB7 EH04M1P Yellow 10 XB7 EH05M1P Red 10 XB7 EH04M2P (1) For version with Faston connectors (1 x 6.35 mm and 2 x 2.8 mm), add suffix 3 to the above s. Example: XB7 E61P EN_er9.1.fm/4
4 References (continued) 1 XB7 EppP Pilot lights with Supply Description Supply voltage Direct (2) For incandescent bulb (not included) (2) With neon bulb of lens 250 White 10 XB7 E61P (1) Green 10 XB7 E63P (1) Red 10 XB7 E64P (1) Yellow 10 XB7 E65P (1) Blue 10 XB7 E66P (1) Clear 10 XB7 E67P (1) Orange 10 XB7 E68P (1) White 10 XB7 E41P (1) Green 10 XB7 E43P (1) Red 10 XB7 E44P (1) Yellow 10 XB7 E45P (1) Blue 10 XB7 E46P (1) Clear 10 XB7 E47P (1) Direct through resistor For incandescent bulb W W bulb (not included) White 10 XB7 E71P (1) Green 10 XB7 E73P (1) Red 10 XB7 E74P (1) Yellow 10 XB7 E75P (1) Blue 10 XB7 E76P (1) Clear 10 XB7 E77P (1) Orange 10 XB7 E78P (1) White 10 XB7 E710P Green 10 XB7 E730P Red 10 XB7 E740P Yellow 10 XB7 E750P Blue 10 XB7 E760P Clear 10 XB7 E770P ia integral transformer With incandescent bulb (6-1.2 W) a 120 White 10 XB7 E821P Green 10 XB7 E823P Red 10 XB7 E824P Yellow 10 XB7 E825P Blue 10 XB7 E826P Clear 10 XB7 E827P White 10 XB7 E81P Green 10 XB7 E83P Red 10 XB7 E84P Yellow 10 XB7 E85P Blue 10 XB7 E86P Clear 10 XB7 E87P XB7 EW3pp1P XB7 EH0pp1P Illuminated pushbuttons with Type Supply Supply voltage Illuminated pushbuttons, spring return Type of contact N/O N/C of lens Projecting Direct supply 1 Green 10 XB7 EW3341P for BA 9s neon bulb Red 10 XB7 EW3441P Yellow 10 XB7 EW3541P Direct supply y Green 10 XB7 EW3361P for BA 9s Red 10 XB7 EW3461P incandescent bulb Yellow 10 XB7 EW3561P (not included) (2) Illuminated pushbuttons, push-push Projecting Direct supply 1 Green 10 XB7 EH0341P for BA 9s neon bulb Red 10 XB7 EH0441P Yellow 10 XB7 EH0541P Direct supply for BA 9s incandescent bulb (not included) (2) y Green 10 XB7 EH0361P Red 10 XB7 EH0461P Yellow 10 XB7 EH0561P (1) For version with Faston connectors (1 x 6.35 mm and 2 x 2.8 mm), add suffix 3 to the above s. Example: XB7 E61P3. (2) Bulb rating for direct supply pilot lights: 250 max; 2.6 W max EN_er9.1.fm/5
5 References (continued) 1 Harmony style 7 30 x 40 mm legend holder with legend (black or red bacround) With blank legend Text Without 10 ZBY ZBY 2101 With marked legend (sold singly) b Start functions: white letters on black bacround. b Stop functions: white letters on red bacround. Text Reference Text Reference Auto ZBY Reset ZBY Down ZBY Reverse ZBY Forward ZBY Right ZBY Hand ZBY Start ZBY Inch ZBY Stop ZBY Left ZBY Up ZBY Off ZBY O ZBY On ZBY ,001 I ZBY Power on ZBY O-I ZBY Accessories Description Anti-rotation plate 10 ZB5 AZ Fixing nut 10 ZB5 AZ ZB5 AZ901 ZB5 AZ905 ZB5 AZ902 Bezel tightening tool 1 ZB5 AZ Grooved lens caps for BA 9s pilot lights White 10 ZB7 E Green 10 ZB7 E Red 10 ZB7 E Yellow 10 ZB7 E Blue 10 ZB7 E Clear 10 ZB7 E Orange 10 ZB7 E DL1 CEppp Bulbs Description Incandescent bulbs, standard Ø 11 mm max length 28 mm max. Incandescent bulbs, long life Ø 11 mm max length 28 mm max. oltage Power W DL1 CB006NSP DL1 CE024NSP DL1 CE130NSP DL1 CB DL1 CE DL1 CE DL1 CSpppp Neon bulbs Ø 11 mm max length 28 mm max Green 10 DL1 CS DL1 CS3220SP Blue 10 DL1 CS DL1 CS6220SP Orange (1) 10 DL1 CS DL1 CS7220SP (1) For use with red, yellow or clear pilot light EN_er9.1.fm/6
6 Dimensions, mounting 1 Harmony style 7 Dimensions XB7 EAppP, XB7 EHppP XB7 EDppP XB7 EGppP e: panel thickness = 1 to 6 mm XB7 ES5ppP XB7 ES1ppP XB7 EpppP e: panel thickness = 1 to 6 mm XB7 E8pP XB7 EW3pppP, XB7 EH0pppP, XB7 EL4p32P e: panel thickness = 1 to 6 mm Faston connector Forked "U" tag connection M3.5 screw Mounting Diameter of finished fixing holes (1) Maximum value. 2 (1) Minimum value. (2) For XB7 E8 pp. (3) Standard value: Ø 22.3 (0; + 0.4). recommended (3) References: pages 35019/3 to 35019/ EN_er9.1.fm/7
Pendant control stations 6
Characteristics 6 Environment Conformity to standards IEC 97-5-1, EN 6097-5-1 Product certifications NEMKO. Special version: UL Listed A600-Q600, CSA A600-Q600 Protective treatment Standard version TH
More informationControl stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M
Characteristics Pendant control stations, for control circuits Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 XAC-B : standard version : NEMKO, CSA 300 V type 4 Approvals XAC-M : standard
More informationComplete units: Push-buttons ø 22mm
Complete units: Push-buttons ø 22mm FLUSH SPRING RETURN - NON-ILLUMINATED Chrome Bezel Part Number Technical Info (p. 103) Black Bezel Part Number 11 Ø 29.9 20.1 19.6 With single position clip Red NC L21AA01-1E01
More informationComplete units: Mushroom heads ø 22mm
Complete units: Mushroom heads ø 22mm MAINTAINED - NON-ILLUMINATED Ø 40 MUSHROOM Push-pull to reset Technical Info (p. 103) Black Bezel Part Number 34.2 Ø 40 Red NC L22DD01-3E01 Red 2 NC L22DD01-3E02 Red
More informationControl Stations ø 22
Control Stations ø 22 CONTROL STATIONS - NON-ILLUMINATED Technical Info (p. 103) MUSHROOM HEAD Ø 40 - MAINTAINED Push-turn to reset Part Number M16/20 47.9 25.7 Ø 40 Red NC EMERGENCY STOP LBX10510 Red
More informationComplete units: Selector switches ø 22mm
Complete units: Selector switches ø 22mm SELECTOR SWITCHES - NON-ILLUMINATED Technical Info (p. 13) WITH KNOB 2 and 3 positions Chrome Bezel Part Number Black Bezel Part Number Ø 29.9 Maintained positions
More informationPendant control stations 6
Characteristics Pendant control stations For control circuits Environment Conformity to standards EN/IEC 0--, CSA C- n Product certiþ cations XAC B Standard version: CSA 00 V type XAC M Standard version:
More informationPendant control stations 6
Characteristics 6 For control circuits Environment Conformity to standards EN/IEC 6097-5-1, CSA C22-2 n Product certifications XAC B Standard version: CSA 300 V type XAC M Standard version: CSA 300 V type
More informationOperator Heads: ø 22mm
Operator Heads: ø 22mm ONE-PIECE PILOT LIGHTS Technical Info (p. 103) SUPPLIED WITHOUT BULB Part Number L20SA40 14.3 44.1 Ø 29.8 Ø 20.2 Ø 22 Ø 29.5 1 to 6 6 Ribbed Lens Clear Smooth Lens With text or symbol
More informationOperator Heads: ø 22mm
Operator Heads: ø 22mm SPRING RETURN - NON-ILLUMINATED Technical Info (p. 103) FLUSH-FLUSH Twin touch Chrome Bezel Part Number Black Bezel Part Number 12.3 11 53.9 29.9 With International Symbols Green
More informationTeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X
Characteristics Contactor type LC1 D09 D18 DT20 and DT25 Environment Rated insulation voltage (Ui) Conforming to IEC 097--1, overvoltage category III, degree of pollution: 3 Conforming to UL, CSA V 00
More informationSeparate units: Blocks
Separate units: Blocks LED BLOCKS Technical Info (p. 103) SCREW TERMINALS Part Number 3.8 LED 19.7 20.1 X1 X2 33EARL 9.9 19.7 21.5 18.2 12/24 V White Red Green Blue Yellow 33EAWL 33EARL 33EAGL 33EABL 33EAYL
More informationLC2D09BL REVERSING CONTACTOR 575VAC 9A IEC
Product datasheet Characteristics LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Price* : 107.62 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category
More informationLC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A - 24 V DC coil
Product data sheet Characteristics LC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 -
More informationCharacteristics 5 TeSys k contactors and reversing contactors
90 Characteristics contactors k contactors and reversing contactors Environment characteristics Conforming to standards IEC 60947, NF C 63-110, VDE 0660, BS 424 Product certifications LCp and LPp K06 to
More informationLC1D12BL TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationComponents for safety applications
Metal, turret head, types CS-A, CS-C and CS-E Double insulated, turret head, types CS-PA, CS-TA and CS-TE Presentation Metal, types CS-A, CS-C, CS-E Switches with or without locking of the actuator Pages
More informationLC2D09BD. Main. Device short name. Utilisation category. Poles description Pole contact composition
Product datasheet Characteristics Main Range Product name Product or component type Device short name Contactor application Utilisation category Device presentation Poles description Pole contact composition
More informationLC1D12BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil
Product data sheet Characteristics LC1D12BD TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D32BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 24 V DC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D32ED TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 48 V DC coil
Product data sheet Characteristics LC1D32ED TeSys D contactor - 3P(3 NO) - AC-3 -
More informationATS01N125FT soft starter for asynchronous motor - ATS01-25 A V KW
Characteristics soft starter for asynchronous motor - ATS01-25 A - 110..480V - 2.2..11 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationATS01N112FT soft starter for asynchronous motor - ATS01-12 A V KW
Characteristics soft starter for asynchronous motor - ATS01-12 A - 110..480V - 1.5..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
More informationControl and signalling units Ø 16
References Pushbutton caps - unmarked (Sold in lots of 10) Application Colour Unit reference Weight Head Head Head Illuminated White ZB6-YDW1 ZB6-YCW1 ZB6-YAW1 0.001 with flush push Green ZB6-YDW3 ZB6-YCW3
More informationProtection components
Multifunction protection relays LT-P Environment Conforming to standards IEC 947-4-1, IEC 34-11, IEC 755, VDE 010, VDE 00. &Ãmarking Meets the essential requirements of the Low Voltage equipment (LV) &
More informationPosition switches FM series
B Position switches FM series Selection diagram 0 08 0 A A 0 A 0 external rubber gasket external rubber gasket external rubber gasket external rubber gasket 69 stainless steel round rod square rod fiber
More informationRE17RCMU off-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics off-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal
More informationisw switches Control Local control IEC/EN , isw switch with indicator light. IEC/EN , isw switch without indicator light.
isw switches DB88 PB0566-40 Position contact indication b Suitable for industrial isolation according to IEC/EN 60947-3 standard. b The presence of the green strip guarantees physical opening of the contacts
More informationRE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal
More informationModular equipment. Presentation, standards. Standard contactors TeSys GC
Presentation, standards Standard contactors TeSys GC Presentation TeSys GC contactors are designed for use in modular panels and enclosures. These contactors feature: b Easy installation v quick clip-on
More informationPUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH PSA, LPSA TYPE
PUSHBUTTON SWITCH / SEECTOR SWITCH / IUMINATED PUSHBUTTON SWITCH PSA, PSA TYPE FEATURES 1 3 The PSA and SPSA types are oil-proof. The enclosure rating is IP65 (water-jet-proof type), covering wide applications.
More informationSafety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
More informationATSU01N232LT soft starter for asynchronous motor - ATSU01-32 A V KW
Characteristics soft starter for asynchronous motor - ATSU01-32 A - 200..480V - 7.5..15 KW Main Range of product Product or component type Product destination Product specific application Device short
More informationATSU01N222LT soft starter for asynchronous motor - ATSU01-22 A V KW
Characteristics soft starter for asynchronous motor - ATSU01-22 A - 200..480 V - 4..11 KW Price* : 195.00 GBP Main Range of product Product or component type Product destination Product specific application
More informationRE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Complementary Contacts material Control type [Us] rated supply voltage Voltage range Main Range of product Product or component
More informationElectronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
More informationMotor starters. TeSys E. Designed for the essential
Motor starters TeSys E Designed for the essential Designed for the essential Contents TeSys E contactors, 6 A to 300 A TeSys E thermal overload relays 0.1 A to 333 A TeSys E control relays 4 NO/NC contacts
More informationATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Characteristics soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationATS01N103FT soft starter for asynchronous motor - ATS01-3 A V KW
Characteristics soft starter for asynchronous motor - ATS01-3 A - 110..480V - 0.55..1.1 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
More informationHarmony Double and Triple- Headed Push Buttons. Catalog
Harmony Double and Triple- Headed Push Buttons Catalog 2011 Improved selection, simplicity and robustness As a world leader in control and signaling components, Schneider Electric continues to innovate
More informationFM series position switches
FM series position switches Selection diagram 0 08 0 A A 0 A 0 External rubber gasket External rubber gasket External rubber gasket External rubber gasket 0 69 Round rod, stainless steel Square rod Glass
More information3 - Protection components Circuit-breakers
Contents - Protection components Circuit-breakers for the motor protection Selection guide..............................................page /2 Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationTable of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35
Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
More informationElectronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
More informationWireless and batteryless pushbuttons
Wireless and batteryless pushbuttons Harmony XBR Catalogue April 0 This document provided by Barr-Thorp Electric Co., Inc. 00-- This document provided by Barr-Thorp Electric Co., Inc. 00-- AR00-EN.indd
More informationRE17LLBM asymmetrical flashing relay s V AC - solid state output
Characteristics asymmetrical flashing relay - 0.1..1 s - 24..240 V AC - solid state output Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 75.00 USD Main Range
More informationRE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay
More informationRE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay
More informationLR Position Switches TECHNICAL DATASHEET
TECHNICA DATASHEET Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 69 contact blocks available actuators available M assembled connector versions Silver
More informationElectronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
More informationActuators Series 8602/3
> Large selection of actuators Pushbuttons Mushroom pushbuttons Rotary actuators Key-operated switches Mushroom stay-put buttons with key lock Mushroom stay-put buttons Twin pushbuttons Illuminated pushbuttons
More information3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching
Main Characteristics: Zero-point switching LED display Various connection technologies Plug-in control terminal Degree of protection IP 2 Insulated mounting foot Standards / Approvals: DIN EN 697--3 UL
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationNS..S contactor relays - with spring terminals AC operated
NS..S contactor relays - with spring terminals AC operated NSES 1SBC101015F00 Description NS..S contactor relays are used for switching auxiliary and control circuits. These contactor relays are designed
More informationNEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models for resistive loads Low zero-cross turn-on voltage Input protection and control LED standard IP20 touch-proof flaps optional Connectors for power wiring and heat sinks
More informationType Nominal voltage (V) Code HSV V
Speed control Speed control relay - mm Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - -wire PNP or NPN, Namur, voltage 0-0V or volt-free contact type Works
More informationElectromechanical pressure and vacuum switches 0
30350-EN_Ver6..fm/ Presentation Electromechanical and vacuum switches 0 Nautilus For control circuits, type XML Pressure and vacuum switches type XML are switches for control circuits. They are used to
More informationA W - A 2A R - 24D - 1
Knob-type Selector Switch A165S/W Mounting Aperture of 16 mm Modular construction Oil-resistant IP65 models UL and cul approved. Conforms to EN60947-5-1, IEC947-5-1 Short mounting depth, less than 28.5
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(24V60HZ) Catalog No. 276390 Eaton Catalog No. XTRE10B22B6 Delivery program Product range DILA relays Application Contactor relays Description Basic devices
More informationProtection components
General Application LT3-Si thermistor protection units continuously monitor the temperature of the machines to be protected (motors, generators, etc.) by means of PTC thermistor probes embedded in the
More informationCustom "Compact" range with display CD20 Custom Part number
Custom "Compact" range with display CD20 Custom Part number 88974051 "Modular" versions designed for Custom application-specific functions (Custom functions) LCD with 4 lines of 18 characters and configurable
More informationRE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Product availability : Stock - Normally stocked in distribution facility Price* : 42.90 USD Main Range of product Product or component
More informationZelio Control Measurement Relays
Selection Guide Application Voltage control Current control Functions 3-phase Single-phase and d.c. Integrated current transformer - Overvoltage and between phases - Overvoltage and between phases and
More informationitl impulse relays IEC/EN itls: IEC/EN itls b Allows remote indication of its operating state (open/closed)
DB123399 DB116619 Country approval pictograms itl, itli, itls, itlc, itlm IEC/EN 60669-2-2 itls: IEC/EN 60947-5-1 Impulse relays B106126-34 B106128-34 itl b The impulse relays are used to control, by means
More informationZBRRA Programmable receiver - 2 relays V AC/ DC - 2 pusbuttons - 6 LEDs
Characteristics Programmable receiver - 2 relays - 24..240 V AC/ DC - 2 pusbuttons - 6 LEDs Product availability : Stock - Normally stocked in distribution facility Price* : 410.00 USD Main Range of product
More informationTechnical data. T2-SM230ASR en v Subject to changes / 3. Electrical data Nominal voltage AC
echnical data sheet SMASR Modulating damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 4 m orque Nm
More informationRE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Product availability : Stock - Normally stocked in distribution facility Price* : 75.00 USD Main Range of product Product
More informationATS01N222LU soft starter for asynchronous motor - ATS01-22 A V KW
Characteristics soft starter for asynchronous motor - ATS01-22 A - 200..240 V - 4..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationControl relays. K mini-control relays. 2 or 4 for CA2-K and CA3-K: 2 for CA4-K. Conforming to VDE 0110 group C V 750
Characteristics Contact characteristics of mini-control relays and instantaneous contact blocks Number of contacts On CAp-K 4 On L-K 2 or 4 for C-K and CA3-K: 2 for CA4-K Rated operational voltage (Ue)
More informationThree-phase monitoring relay CM-PFS
Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available
More informationThree-phase monitoring relay
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
More information"Modular" versions designed for application-specific functions LCD with 4 lines of 18 characters and configurable backlighting
Smart "Compact" range with display CD12 Smart Part number 88974043 "Modular" versions designed for application-specific functions LCD with 4 lines of 18 characters and configurable backlighting Type Input
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S
More informationPD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description
Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer
More informationBulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.
Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents
More informationType: EASY719 AC RC Article No.: Ordering information Relay outputs Quantity 6 Power supply V DC 115/230 V AC. Description
Type: EASY719 AC RC Article No.: 274115 Ordering information Relay outputs Quantity 6 Power supply V DC 115/230 V AC Description 12 digital inputs 6 relay outputs LCD display Operating buttons Screw terminals
More informationTeSys circuit-breakers Thermal-magnetic motor circuit-breakers types GV2, GV3 and GV7
Presentation Thermal-magnetic motor circuit-breakers types GV, GV and GV7 GV-ME, GV-P, GV-ME and GV7-R motor circuit-breakers are -pole thermal-magnetic circuit-breakers specifically designed for the control
More informationNA DigiParts GmbH. Small / Slim Object Detection Area Sensor
953 PHOTO PHOTO MEASURE ITY Object Area Sensor General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Cross-beam scanning system to detect slim objects Letters or business
More informationRXG21BD interface plug-in relay - Zelio RXG - 2 C/O standard - 24V DC - 5A - with LTB
Characteristics interface plug-in relay - Zelio RXG - 2 C/O standard - 24V DC - 5A - with LTB Main Range of product Series name Product or component type Device short name Contacts type and composition
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects. Letters or business cards detectable!
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationDatasheet - ZQ N
20.07.2016-17:41:15h Datasheet - ZQ 900-13N Pull-wire emergency stop switches / ZQ 900 Preferred typ Metal enclosure one-side operation / wire up to 75 m long Release push button Position indicator Robust
More informationHMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton
Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates
More informationZelio Plug-In Relays. RXG interface relays. Catalog
Zelio Plug-In Relays Catalog 204 Contents Zelio Plug-In Relays bbintroduction.... 3 bbspecifications.................................................... 4 bbreferences... 7 bbdimensions.... 0 bbwiring
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
DATASHEET - DILA-22(230V50HZ,240V60HZ) Delivery program Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(230V50HZ,240V60HZ) Catalog No. 276399 Eaton Catalog No. XTRE10B22F EL-Nummer 0004130208 (Norway)
More informationInstructions Contact numbers to EN Coil terminal markings to EN Integrated diode-resistor combination Coil rating 2.
Delivery program Contactor relay, 2N/O+2N/C, DC current Part no. DILER-22-G(24VDC) Catalog No. 010042 Eaton Catalog No. XTRM10A22TD EL-Nummer 4130354 (Norway) Product range DILER Mini-contactors Application
More informationV2UM230V10 Art.Nr.: V2UM230V10P Art.Nr.: Control elements. Tripping delay. Function selector. Status indication 230 V AC/DC
P AC/DC voltage monitoring Multifunction Supply voltage 24 V DC or 230V AC/DC Supply circuit = Measuring circuit 1 change-over contact Width 22,5 mm Control elements Tripping delay Maximum threshold Minimum
More information02/11/2015
Smart "Compact" range with display CD20 Smart Part number 88974053 Highly visible blue LCD with 4 lines of 18 characters and configurable backlighting Allow the use of the entire library of specific functions
More informationMeasuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
More informationMoeller Electric Corporation
EMR4-I Current Monitoring Relays 02/0053 EMR4-I1-2-A EMR4-I15-2-A EMR4-I15-2-B Mechanical lifespan operations x10 6 30 30 30 24-h cycle, 55 C, 93 % relative humidty, 96 h Ambient temperature min./max.
More information02/11/2015
Smart range with Removable Terminal blocks XD26RBT Smart Part number 88974561 Designed for industrial, commercial, medical and paramedical machines Faster maintenance process which improves the machine
More informationRE17RMMU time delay relay 10 functions - 1 s..100 h V AC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 24..240 V AC - 1 OC Product availability : Stock - Normally stocked in distribution facility Price* : 62.00 USD Main Range of product Product
More informationElectronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts The CT-MXS.22 is a multifunctional electronic timer from the CT-S range. It provides 5 timing functions, 2 times 10 time
More informationLocal control stations for Zone 1 and Zone 21. Features. Description
Local control stations for Zone and Zone Local control stations for Zone and Zone Features The right size/material enclosure Optimum functionality thanks to the great variety of components Customised planning
More informationSubject to changes 11/2003 Page 1/7
Main Characteristics: Zero switching. LED display. Various connection systems. Plug-in control terminal. Degree of protection IP 2. Double-insulated design. General Data: Standards / Approvals DIN EN 697--3
More informationVoltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More information02/11/2015
"Compact" range with display CD12 Part number 88970041 Green LCD with 4 lines of 18 characters and configurable backlighting More cost effective solution Industrial temperature range (-20 C +55 C) Analogue
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with true OFF-delay and 10 time ranges. All electronic timers from
More informationATSU01N209LT soft starter for asynchronous motor - ATSU01-9 A V KW
Characteristics soft starter for asynchronous motor - ATSU01-9 A - 200..480V - 1.5..4 KW Product availability : Stock - Normally stocked in distribution facility Price* : 152.00 USD Main Range of product
More informationHMI Components. Series. Flush design Raised design PCB (with adaptor) Indicator Pushbutton Illuminated pushbutton
Edition /204 HMI Components 8 Series Characteristics The compact 8 mm Series 8 is especially suited for: Flush design Raised design PCB (with adaptor) Functions The Series 8 incorporates the following
More informationType: DILM80(110V50HZ,120V60HZ) Article No.: Sales text Contactor,37kW/400V,AC operated. Ordering information
Type: DILM80(110V50HZ,120V60HZ) Article No.: 239399 Sales text Contactor,37kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current AC 3 380 V 400
More information