LC2D09BD. Main. Device short name. Utilisation category. Poles description Pole contact composition

Transcription

1 Product datasheet Characteristics Main Range Product name Product or component type Device short name Contactor application Utilisation category Device presentation Poles description Pole contact composition System Voltage [Ie] rated operational current Motor power kw Motor power hp Control type [Uc] control voltage Auxiliary contact composition [Uimp] rated impulse withstand voltage Overvoltage category [Ith] conventional free air thermal current Irms rated making capacity Rated breaking capacity [Icw] rated short-time withstand current Associated fuse rating TeSys TeSys D Reversing contactor LC2D Motor control Resistive load AC-1 AC-3 Preassembled with reversing power busbar 3P 3 NO <= 690 V AC Hz power <= 300 V DC power 25 A (<= 140 F (60 C)) at <= 440 V AC AC-1 power 9 A (<= 140 F (60 C)) at <= 440 V AC AC-3 power 4 kw at V AC 50/60 Hz 2.2 kw at V AC 50/60 Hz 5.5 kw at 500 V AC 50/60 Hz 5.5 kw at V AC 50/60 Hz 4 kw at V AC 50/60 Hz 0.5 hp at 115 V AC 50/60 Hz 1 phase motors 1 hp at 230/240 V AC 50/60 Hz 1 phase motors 2 hp at 200/208 V AC 50/60 Hz 3 phases motors 2 hp at 230/240 V AC 50/60 Hz 3 phases motors 5 hp at 460/480 V AC 50/60 Hz 3 phases motors 7.5 hp at 575/600 V AC 50/60 Hz 3 phases motors DC standard 24 V DC 1 NO + 1 NC 6 kv conforming to IEC III 25 A at <= 140 F (60 C) power 10 A at <= 140 F (60 C) signalling 250 A at 440 V power conforming to IEC A AC signalling conforming to IEC 250 A DC signalling conforming to IEC 250 A at 440 V power conforming to IEC A <= 104 F (40 C) 10 s power 210 A <= 104 F (40 C) 1 s power 30 A <= 104 F (40 C) 10 min power 61 A <= 104 F (40 C) 1 min power 100 A 1 s signalling 120 A 500 ms signalling 140 A 100 ms signalling 20 A gg at <= 690 V coordination type 2 power 25 A gg at <= 690 V coordination type 1 power 10 A gg signalling conforming to IEC The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. 1 / 5

2 Average impedance [Ui] rated insulation voltage Electrical durability Power dissipation per pole Protective cover Interlocking type Mounting support 2.5 mohm at 50 Hz - Ith 25 A power 600 V power certifications CSA 600 V power certifications UL 690 V power conforming to IEC V signalling conforming to IEC V signalling certifications CSA 600 V signalling certifications UL 0.6 Mcycles 25 A AC-1 at Ue <= 440 V 2 Mcycles 9 A AC-3 at Ue <= 440 V 0.2 W AC W AC-1 With Mechanical Plate Rail Standards UL 508 CSA C22.2 No 14 EN EN IEC IEC Product certifications Connections - terminals Tightening torque Operating time BV CCC CSA DNV GL GOST LROS (Lloyds register of shipping) RINA UL Control : screw clamp terminals 2 cable(s) in² ( mm²) - cable stiffness: flexible - Control : screw clamp terminals 2 cable(s) Control : screw clamp terminals 2 cable(s) Power : screw clamp terminals 2 cable(s) Power : screw clamp terminals 2 cable(s) in² ( mm²) - cable stiffness: flexible - Power : screw clamp terminals 2 cable(s) Power : lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat Ø 6 mm Power : lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No 2 Control : lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat Ø 6 mm Control : lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No ms closing 2 / 5

3 Safety reliability level Mechanical durability Operating rate ms opening B10d = cycles contactor with nominal load conforming to EN/ISO B10d = cycles contactor with mechanical load conforming to EN/ISO Mcycles 3600 cyc/h at <= 140 F (60 C) Complementary Coil technology Control voltage limits Time constant Inrush power in W Hold-in power consumption in W Built-in bidirectional peak limiting diode suppressor Uc drop-out at 140 F (60 C), DC Uc operational at 140 F (60 C), DC 28 ms 5.4 W at 68 F (20 C) 5.4 W at 68 F (20 C) Auxiliary contacts type Type mechanically linked (1 NO + 1 NC) conforming to IEC Type mirror contact (1 NC) conforming to IEC Signalling frequency Minimum switching current Minimum switching voltage Non-overlap time Insulation resistance Hz 5 ma signalling 1.5 ms on de-energisation (between NC and NO contact) 1.5 ms on energisation (between NC and NO contact) > 10 MOhm signalling Environment IP degree of protection IP20 front face conforming to IEC protective treatment TH conforming to IEC pollution degree 3 ambient air temperature for operation ambient air temperature for storage F ( C) F ( C) permissible ambient air temperature around the device F ( C) at Uc operating altitude ft (3000 m) without derating in temperature fire resistance 1562 F (850 C) conforming to IEC flame retardance V1 conforming to UL 94 mechanical robustness height width depth product weight Vibrations contactor open 2 Gn, Hz Vibrations contactor closed 4 Gn, Hz Shocks contactor open 10 Gn for 11 ms Shocks contactor closed 15 Gn for 11 ms 3.03 in (77 mm) 3.54 in (90 mm) 3.74 in (95 mm) 2.24 lb(us) (1.017 kg) Offer Sustainability Green Premium product Compliant - since Schneider Electric declaration of conformity Reference not containing SVHC above the threshold WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to Green Premium product Compliant - since Schneider Electric declaration of conformity Reference not containing SVHC above the threshold WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to Contractual warranty 3 / 5

4 Warranty period 18 months Dimensions LC2 or 2 x LC1 a b c (1) e1 e2 G D09 to D18 (AC) D093 to D123 (AC) D09 to D18 (DC) D093 to D123 (DC) D25 to D38 (AC) D183 to D383 (AC) D25 to D32 (DC) D183 to D383 (DC) e1 and e2: including cabling. (1) With safety cover, without add-on block. Wiring Our Proposal - Type 1 : Circuit Breaker + Contactor for Motor Power from 0,06 to 4 kw and 415 VAC Motor Power (kw) Icu (ka) Breaker Contactor 0.06 > 100 GV2ME > 100 GV2ME03 4 / 5

5 0,12 to 0,18 > 100 GV2ME04 0,25 to 0,37 > 100 GV2ME > 100 GV2ME > 100 GV2ME07 1,1 to 1,5 > 100 GV2ME > 100 GV2ME10 3 to 4 > 100 GV2ME14 Non contractual pictures. Type 1 coordination requires that in a short- condition, the contactor or starter must not present any danger to personnel or installations and must not be able to resume operation without repair or the replacement of parts. 5 / 5