Electrical submittal no data received July 1, 2015 has been reviewed by this office with the following disposition:

Transcription

1 SUBMITTAL REVIEW July 6, 2015 Melissa Guarin Beaverton School District SW Merlo Road Beaverton, OR Project: BSD Sunset High School Athletic Center Project No.: Dear Melissa: Electrical submittal no data received July 1, 2015 has been reviewed by this office with the following disposition: Item Manufacturer Action Low Voltage Electrical Power Conductors and Cables Conductor 600-Volt Cerrowire No Exceptions Taken Connectors Ideal No Exceptions Taken Branch Circuit Conductor Splices Polaris No Exceptions Taken Splices with Compression Fitting/ Polaris No Exceptions Taken Heat-Shrinkable Fittings Cable Test Data Honeywell No Exceptions Taken The above submittal data has been reviewed only for conformance with the design concept and for compliance with information given in the Contract Documents, and this review does not extend to means, methods, techniques, sequence of construction, dimensions, quantities, or safety precautions thereto. Review does not relieve the contractor from responsibility for variations from the requirements of the Contract Documents. Returned herewith is one (1) copy of the above data. We are retaining one copy for our files. Please include a copy of this letter with each submittal package. Sincerely, Todd Thayer TDT/mmb P:\2014\ BSD Sunset HS Athletic Center\04 Construction Administration\Submittals\ \ _PAE Submittal Letter.docx

2 SUBMITTAL REVIEW PROJECT NAME Sunset HS Title IX Compliance Interiors and Concessions PROJECT # 7928 SUBMITTAL NAME Low Voltage Electrical Power Conductor and Cable SUBMITTAL NUMBER DATE 07/07/15 REVIEWERS Jessica Faust Project Manager Chris Sandberg Inspector (Previous electrical lead) COMMENTS: Submittal approved as submitted. Stranded wire is to be used for all wiring. District Goal: All students will show continuous progress toward their personal learning goals, developed in collaboration with teachers and parents, and will be prepared for post-secondary education and career success. The Beaverton School District recognizes the diversity and worth of all individuals and groups. It is the policy of the Beaverton School District that there will be no discrimination or harassment of individuals or groups based on race, color, religion, gender, sexual orientation, gender identity, gender expression, national origin, marital status, age, veterans' status, genetic information or disability in any educational programs, activities or employment.

3 Sunset High School NW Cornell Rd. Portland, OR To: BLRB ARCHITECTS, P.S. Date: 07/01/2015 Attn: RICHARD HIGGINS 1001 SW 5TH AVE., SUITE 1100 Contact Phone: PORTLAND, OR Contact CC d: SUBMITTAL TRANSMITTAL FOR APPROVAL Submittal #: 65 Rev.#: 0 In Accordance with Specification Section #: This is a submittal for Low Voltage Electrical Power Conductors and Cables items per the table below as reviewed and noted by Pavilion Construction NW, LLC, and provided by. Please provide a response to this submittal by 07/11/2015. Pavilion Status: Sent/Submitted Notes: Submitted By: Riley Tobin Phone: (503) Address: rtobin@pavilionconstruction.com Fax: (503) Architect s Response SUBMITTAL RESPONSE Schedule Tracking Proceed Date Received from Sub/Sup 06/30/2015 Proceed, as noted Date Requested to be returned 07/11/2015 Revise and Resubmit Date Returned from Architect Material Return without Review Date Returned to Sup/Sup Comments: PAVILION CONSTR JCTION LLC o APPROVED AS SUBMITTEO o OISAPPROVEO, PlIASE SUBMIT COPlES o APPRDVEOAS NOTEO o F()R THE RECORD RY: _ Riley _ Tobin DATED: 7/1/15 06/23/15 This submittal has been reviewed for general "onformil."'.ce with ttle contract documents. Tn's review does not reuevs the supplier of responsibility for erro~, omissions or any dtviition tram the requirem ents of the ",..... r?c! :!vr:umems. Pavilion Construction NW, LLC 4700 SW Macadam Ave. Portland, OR Phone: (503) Fax: (503) Page 1 of 1

4 Sunset High School - Title IX and Upgrades Beaverton School Dstrict No. 48 BLRB Project No.: 14.84P Permit Set May 15, 2015 SECTION LOW VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. B. The provisions of Division 26 Section, Common Work Results for Electrical apply to this section. 1.2 SUMMARY A. This Section includes: 1. Copper conductors. Indicated sizes shall be considered minimum for ampacities and voltage drop requirements. 2. Conductors for special systems shall be as recommended by the equipment manufacturer except as noted. 3. Deliver conductors to the job site in cartons, protective covers, or on reels. B. Related Sections include: 1. Section Grounding and Bonding for Electrical Systems. 2. Section Raceways and Boxes for Electrical Systems. 3. Section Identification for Electrical Systems. 1.3 REFERENCED STANDARDS A. ASTM: American Society For Testing and Materials: 1. ASTM B 3 Soft or Annealed Copper Wire. 2. ASTM B 8 Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft. 3. ASTM B 33 Tinned Soft or Annealed Copper Wire for Electrical Purposes. B. ICEA: Insulated Cable Engineers Association: 1. S Non-shielded 0-2 kv Cables C. IEEE: Institute of Electrical and Electronic Engineers: 1. IEEE 383 Type Test of Class IE Electric Cables, Field Splices, and Connections. D. UL: Underwriters Laboratories: 1. UL 44 Rubber-Insulated Wires and Cables. 2. UL 83 Thermoplastic-Insulated Wires and Cables. 3. UL 1277 Type TC Power and Control Tray Cable. 1.4 SUBMITTALS A. Submit product data for the following materials: 1. Single conductor 600-volt power and control conductors. See Pages 8-9 BLRB Architects - Portland, Oregon PAE LOW VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES

5 Sunset High School - Title IX and Upgrades Beaverton School Dstrict No. 48 BLRB Project No.: 14.84P Permit Set May 15, 2015 B. Submittals of the following materials shall consist only of a listing of the manufacturer s name and the applicable catalog numbers of the items to be utilized. 1. Connectors. See Pages Branch circuit conductor splices. See Pages Splices with compression fitting and heat-shrinkable insulator. See Pages C. Submit cable test data per testing requirements of Part 3. Pages PART 2 - PRODUCTS 2.1 CONDUCTORS 600V A. Type: 1. Copper: No. 12 AWG minimum size unless noted otherwise. No. 12 and No. 10, solid or stranded, No. 8 or larger, Class B concentric or compressed stranded. 2. Aluminum is not permitted and shall not be utilized. B. Insulation: 1. THHN/THWN-2 for conductors 6 AWG and smaller. 2. XHHW-2 for conductors 4 AWG and larger. C. Thru wiring in fluorescent luminaires shall be rated for 90 degree C minimum. D. Manufacturers: General, Essex, Southwire, or equivalent. 2.2 POWER LIMITED WIRING A. Copper, stranded or solid as recommended by the system manufacturer. B. Insulation shall be appropriate for the system and location used. 2.3 CONNECTORS 600V AND BELOW A. Branch Circuit Conductor Splices: 1. Live spring type, Scotchlok, Ideal Wire Nut, Buchanan B-Cap, or 3M Series 560 self-stripping type. B. Cable Splices: Compression tool applied sleeves, Kearney, Burndy, or equivalent with 600V heat shrink insulation. Except where specifically indicated on the plans, all proposed splice locations shall be submitted for review by the Engineer. C. Terminator Lugs for Stranded Wire: AWG Wire and Smaller: Spade flared, tool applied AWG Wire and Larger: Compression tool applied, Burndy, Anderson, or equivalent. 3. Setscrew type terminator lugs furnished as an integral part of switches and circuit breakers will be acceptable. BLRB Architects - Portland, Oregon PAE LOW VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES

6 Sunset High School - Title IX and Upgrades Beaverton School Dstrict No. 48 BLRB Project No.: 14.84P Permit Set May 15, 2015 PART 3 - EXECUTION 3.1 CONDUCTORS A. Pulling compounds may be used for pulling all conductors. Clean residue from the conductors and raceway entrances after the pull is made. B. Pulleys or blocks shall be used for alignment of the conductors when pulling. Pulling shall be in accordance with manufacturer s specifications regarding pulling tensions, bending radii of the cable, and compounds. C. Make up and insulate wiring promptly after installation of conductors. Wire shall not be pulled in until all bushings are installed and raceways terminations are completed. Wire shall not be pulled into conduit embedded in concrete until after the concrete is poured and forms are stripped. D. Provide a dedicated neutral conductor with each branch circuit, do not use a shared neutral conductor between phases unless specifically requested or directed. 3.2 CONNECTORS A. Control and special systems wires shall be terminated with a tool applied spade flared lug when terminating at a screw connection. B. All screw and bolt type connectors shall be made up tight and retightened after an eight hour period. C. All tool applied compression connectors shall be applied per manufacturer s recommendations and physically checked for tightness. 3.3 COLOR CODING A. Secondary service, feeders, and branch circuit conductors shall be color coded. Phase color code to be consistent at all feeder terminations, A-B-C left-to-right, A-B-C top-to-bottom, or A-B-C front-toback. Color code shall be as follows: 120/240 volt 208Y/120 volt Phase 480 volt 480Y/277 volt Black A Brown Red B Orange Blue C Yellow White Neutral Gray* Green Ground** Green * or white with colored (other than green) tracer **Ground for isolated ground receptacles shall be green with yellow tracer. B. Use solid color compound or solid color coating for No. 12 and No. 10 branch circuit conductors and neutral sizes. C. Phase conductors No. 8 and larger color code using one of the following: 1. Solid color compound or solid color coating. 2. Stripes, bands, or hash marks of color specified above. BLRB Architects - Portland, Oregon PAE LOW VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES

7 Sunset High School - Title IX and Upgrades Beaverton School Dstrict No. 48 BLRB Project No.: 14.84P Permit Set May 15, Colored as specified using 3/4-inch wide tape. Apply tape in half overlapping turns for a minimum of three inches for terminal points and in junction boxes, pull boxes, troughs, manholes, and handholes. Apply the last two laps of tape with no tension to prevent possible unwinding. Where cable markings are covered by tape, apply tags to cable stating size and insulation type. D. Switchlegs, travelers, etc., to be consistent with the phases to which connected or a color distinctive from that listed. E. Color-coding of the flexible wiring system conductors and connectors shall be the manufacturer s standard. F. For modifications and additions to existing wiring systems, color-coding shall conform to the existing wiring system. 3.4 FIELD TESTING A. All 600-volt rated conductors shall be tested by the Contractor for continuity. Conductors 100A and over in size shall be meggered after installation and prior to termination. Provide the megger, rated 1,000 volts d.c., and record and maintain the results, in tabular form, clearly identifying each conductor being tested. 1. Replace cables when test value is less than 15 megohms. 2. Cable test submittal shall include results, equipment used, and date. END OF SECTION BLRB Architects - Portland, Oregon PAE LOW VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES

8 Power Conductors and Cables

9 Wire

10 THHN/THWN Vinylon PVC/Nylon 14 AWG 10 AWG 90 C Dry 75 C Wet/600 Volts Gasoline and Oil Resistant II Machine Tool Wire (Stranded): 90 C Dry Appliance Wire: 105 C Dry 14 AWG 10 AWG rated THHN/THWN: 90 C Dry, 75 Wet Product Code Conductors AWG Size No. of Strands Covering PVC Ins. Mils. Nylon Jkt. Mils. Approx O.D. Inches Allowable Ampacities* 60 C ** 75 C *** 90 C **** Approx Net Wt. lbs./m ft. APPLICATIONS 600 volt building wire for use in commercial and industrial applications as specified in the NEC Marked VW-1 CONDUCTORS Solid conductors: Uncoated copper per ASTM-B3 Stranded conductors: Uncoated copper per ASTM- B3, ASTM-B787 INSULATION Color coded, heat and moisture resistant PVC (polyvinyl chloride) JACKET Nylon (polyamide), clear INDUSTRY STANDARDS UL 83: File No. E15119 UL 1063 (MTW): File No. E85964 AWM: File No. E11829 Canadian Standard C22.2 No. 75 and CSA Bulletin No ASTM: B3, B8, B787 WC70/ICEA S Federal Specification A-A NFPA70: National Electrical Code SURFACE PRINT Sample: CERRO WIRE VINYLON-A 14 AWG (2.08 mm 2) (UL) THHN or THWN OR MTW OR AWM GR2 VW-1 600V - C (UL) TWN75 OR T90 NYLON XX 14 SOL XX 12 SOL XX 10 SOL XX XX XX XX Color Add Code (see chart) * Per Table NEC ** For termination to equipment for circuits rated 100 amperes or less, or marked for size 14 through 1 AWG conductors. Also for MTW used in wet locations or exposed to oil or coolant. *** For termination to equipment for circuits rated over 100 amperes or marked for conductors larger than 1 AWG. Also for THWN-2 exposed to oil or coolant and MTW in dry locations. **** For THHN used in dry locations and THWN-2 used in wet or dry locations. For ampacity derating purposes. AWG Size Black 01 Color Available (Product Code 6th and 7th Digits) White 02 Red 03 Blue 04 Green 05 Orange 06 Yellow 07 Brown 08 Purple 09 Grey solid X X X X X X X X X X X 12 solid X X X X X X X X X X X 10 solid X X X X X X X X X X X 14 strand X X X X X X X X X X X 12 strand X X X X X X X X X X X 10 strand X X X X X X X X X X X Package Code J J J K M P Size 14,12 Solid & Strand 10 Solid & Strand 500' spool 1000' ctn X 500' spool 2000' ctn X 500' reel 1000' reel 2500' reel X X 5000' reel 10000' reel 13000' reel 15000' reel Pink ' reel Cerro Wire LLC 1099 Thompson Road, SE Hartselle, AL Phone І Fax Made in USA Rev

11 90 C Dry or Wet/600 Volts Gasoline and Oil Resistant II Machine Tool Wire: 90 C Dry Appliance Wire: 105 C Dry Rated THHN/THWN-2: 90 C Dry or Wet No pulling lube required Sequential footage markings 1 AWG and larger Max Print for easy ID THHN/THWN-2 Vinylon PVC/Nylon 8 AWG 750 MCM APPLICATIONS 600 volt building wire for use in commercial and industrial applications as specified in the NEC 8-1 AWG is marked VW-1 1/0 750 MCM rated for CT use 8 AWG 750 MCM in black; Rated sunlight resistant Pulling lube is not required. Jacketed with SLP (Self- Lubricating Polymer). CONDUCTORS Uncoated copper per ASTM- B3, ASTM-B787 (6 AWG-500 MCM) & ASTM-B8 (600 MCM- 750 MCM) INSULATION Color coded, heat and moisture resistant PVC (polyvinyl chloride) SLP-JACKET Using Cerro Wire s SLP- Jacket (Self-Lubricating Polymer) Technology, Cerro Wire SLiPWire THHN is self lubricated. Nylon (polyamide), color coded INDUSTRY STANDARDS UL 83: File No. E15119 UL 1063 (MTW): File No. E85964 AWM: File No. E11829 Canadian Standard C22.2 No. 75 and CSA Bulletin No ASTM: B3, B8, B787 WC70/ICEA S Federal Specification A-A NFPA70: National Electrical Code SURFACE PRINT Sample: CERRO WIRE VINYLON -A 350 KCMIL (UL) MTW OR THWN-2 OR THHN OR GASO- LINE AND OIL RESISTANT II OR AWM FOR CT USE SUNLIGHT RESISTANT 600V C(UL) TWN75 OR T90 NYLON Product Code Conductors AWG Size No. of Strands Covering PVC Ins. Mils. Nylon Jkt. Mils. Approx O.D. Inches Allowable Ampacities* 60 C ** 75 C *** 90 C **** Approx Net Wt. lbs./m ft XX XX XX XX XX XX XX 1/ XX 2/ XX 3/ XX 4/ XX XX XX XX XX XX XX XX Color Add Code (see chart) * Per Table NEC ** For termination to equipment for circuits rated 100 amperes or less, or marked for size 14 through 1 AWG conductors. Also for MTW used in wet locations or exposed to oil or coolant. *** For termination to equipment for circuits rated over 100 amperes or marked for conductors larger than 1 AWG. Also for THWN-2 exposed to oil or coolant and MTW in dry locations. **** For THHN used in dry locations and THWN-2 used in wet or dry locations. For ampacity derating purposes. Color availability: 8 AWG & 6 AWG are available in black, white, red, blue, green, orange, yellow, brown, purple and gray. 4 AWG through 600 MCM are available in black, white, red, blue, green, orange, yellow, brown and gray. 750 MCM is available in black and in white, red, blue, green, orange, yellow, brown and gray by special order only. Color add code is as follows: black 01, white 02, red 03, blue 04, green 05, orange 06, yellow 07, brown 08, purple 09 and gray 10. Cerro Wire LLC 1099 Thompson Road, SE Hartselle, AL Phone І Fax Made in USA Rev

12 Connectors

13 Wire Termination Wing-Nut Wire Connectors Q Three color-coded models cover a full range of wire sizes from 18 to 6 AWG Q Specially designed contoured wings provide a secure grip for extra leverage on maximum wire combinations Wire Connectors Q Live-action spring expands to accept wire shape and size with no pre-twisting required Q Square-wire spring threads directly onto conductors for fast, secure connections Q Deep skirt helps protect against flash-over and turned-back strands for maximum dielectric protection Q Tough, UL 94V-2 flame-retardant shell rated at 105 C (221 F) Q UL Listed to 486C and CSA Certified to C22.2 #188; comply with Federal Specification W-S-610E Model Color Wire Combination Range Wire Combination Range (mm) Yellow 18 to 10 AWG Min. 2 #18 Max. 3 #12,75mm2 to 6,0mm2 Min. 2-,75mm2 Max. 3-4,0mm2 Red 18 to 8 AWG Min. 2 #18 Max. 4 #10,75mm2 to 10,0mm2 Min. 2-,75mm2 Max. 4-6,0mm2 Blue 14 to 6 AWG Min. 3 #12 Max. 1 #6 & 2 #8 2,5mm2 to 16,0mm2 Min. 3-4,0mm2 Max. 2-16,0mm2 w/1-4,0mm2 Quantity Box of 100 Jar of 225 Jar of 500 Carton of 1,000 Keg of 5,000 (10 bags, 500 ea.) Barrel of 35,000 Box of 100 Jar of 300 Jar of 500 Carton of 1,000 Keg of 5,000 (10 bags, 500 ea.) Barrel of 25,000 Box of 25 Carton of 250 Keg of 1,000 (10 bags, 100 ea.) Barrel of 10,000 Cat. No J J J J Quantity Box of 100 Cat. No *1,000V maximum in fixtures and signs Greenie Grounding Wire Connectors Q Designed for making ground connections and bonding non-metallic sheathed cable Q Contoured wings for maximum leverage Q Live-action, square-wire spring provides superior grounding connections Q Tough, UL 94V-2 flame-retardant shell Q UL Listed to 467 and CSA Certified to C22.2 #188; comply with Federal Specification W-S-610E Wire Combination Wire Combination Model Color Wire Combination Range Wire Combination Range (mm) 92 Green 14 to 10 Min. 2 #14 Max. 4 #12 2,5mm2 to 6,0mm2 Min. 2-2,5mm2 Max. 2-4,0mm2 w/1-2,5mm2 Jar of J Carton of 1, Keg of 5,000 (10 bags, 500 ea.) Barrel of 25, Greenie Grounding Connector fully meets the intent of the N.E.C. and specifically aids in compliance with the following: ARTICLE 250: GROUNDING Connecting Receptacle Grounding Terminal to Box Continuity and Attachment of Equipment Grounding Conductors to Boxes (B) Grounding continuity (D) Nonmetallic boxes for Customer Service A-3

14 Twister Wire Connectors Q Exceptional wire-range capacity three models handle wire combinations from as small as 22 AWG to as large as 6 AWG Wire Connectors Q Ribbed cap provides a secure grip and fast fingertip starts Q Swept wings offer extra leverage and less effort for large wire combinations Q Hexagonal shape accommodates standard nutdriver for tool installation Q Live-action, square-wire spring locks onto wire for safe, secure connections Q Deep skirt helps protect against flash-over and turned-back strands for maximum dielectric protection Q Tough, UL 94V-2 flame-retardant shell rated at 105 C (221 F) Q UL Listed to 486C and CSA Certified to C22.2 #188; comply with Federal Specification W-S-610E Model 340 Color Lt. Blue 342 Wire Combination Range (mm) Quantity Cat. No.,34mm2 to 4,0mm2 Min. 2-,34mm2 Max. 3-4,0mm2 Box of Jar of J Barrel of 35, Box of 100 Jar of 400 Jar of 750 Carton of 1,000 Keg of 5,000 (10 bags, 500 ea.) Barrel of 25, J J Box of Keg of 2,500 (10 bags, 250 ea.) Barrel of 15, Quantity Box od 50 Cat. No Jar of J Jar of J Barrel of 20, to 10 AWG Min. 2 #22 Max. 3 #12 Tan 22 to 8 AWG Min. 3 #22 Max. 3 #10,34mm2 to 10,0mm2 Min. 3-,34mm2 Max. 3-6,0mm2 Gray 18 to 6 AWG Min. 3 #14 Max. 2 #8 w/2 #12,75mm2 to 10,0mm2 Min. 3-2,5mm2 Max. 2-10,0mm2 w/2-4,0mm2 341 Wire Combination Range *1,000V maximum in fixtures and signs Wire Connectors Q The widest red/yellow wire range in the industry; min. 2 #18 to max. 4 #10 Q SureGrip overmolding provides better grip for improved leverage, more torque and faster connections Q Comfortable swept wings designed to help reduce hand fatigue Q Expanding square-wire spring provides a secure connection every time Q Tough, UL 94V-2 flame-retardant shell rated at 105 C (221 F) Q UL Listed to 486C and CSA Certified to C22.2 #188; comply with Federal Specification W-S-610E Model 344 Color Wire Combination Range Wire Combination Range (mm) Red/Yellow 22 to 8 AWG Min. 2 #18 Max. 4 #10,34mm2 to 10,0mm2 Min. 2-,75mm2 Max. 4,0-6,0mm2 *1,000V maximum in fixtures and signs A for Customer Service

15 Splices

16 POLARIS INSUL-TAP CONNECTORS FOR TWO WIRES & IN-LINE SPLICERS/REDUCERS IT SERIES Insul-Tap connectors are suitable for connecting two wires. For sizes 3/0 AWG and smaller, they are available in two styles with wires being connected from the same side of the connector (Figure1) or opposite sides of the connector (Figure 2). For sizes 250 MCM and larger, they are provided with open wire entry ports on both sides of the connector (Figure 3), which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 C. Dual rated for use with copper and/or aluminum cables. 600 volts. 90 C. To receive the material in bags, add -B to the catalog number. Not recommended for fine-stranded, flexible wire. See Polaris Grey Series page 88. CATALOG UPC WIRE (INCHES) HEX CARTON WEIGHT FIGURE NO. CODE RANGE LENGTH HEIGHT WIDTH SIZE QTY. LBS.EA IT slotted ITO slotted IT4-A / IT4-S not pictured slotted IT-1/ / / ITO-1/ / / IT-3/ / / ITO-3/ / / ITO4-A / IT / IT / IT / IT / IT-750* / ITH / Series are AL7CU and 75 C *Not UL Listed ISR SERIES ISR Series connectors are suitable for connecting two wires in-line. Insulated with high dielectric strength plastisol and molded for precise fit. Supplied with removable access plugs over the hex screw. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 C. Dual rated for use with copper and/or aluminum cables. 600 volts. 90 C. Not recommended for use with extraflexible cables. See Polaris Grey Series page 88. UPC NO. UPC. NO 600 Series are AL7CU and 75 C FIGURE WIRE RANGE (INCHES) LENGTH HEIGHT WIDTH HEX SIZE CARTON QTY. WEIGHT LBS. EA ISR-1/ / / ISR / ISR / ISR / ISR / ISRH / CATALOG NSi 88

17 POLARIS POLARIS BLUE ISW SERIES DIRECT BURIAL AND SUBMERSIBLE IN-LINE SPLICER/REDUCERS CAT. NO. UPC CODE WIRE RANGE URD/USE THHN/XHHW* ISW Series connectors are suitable for connecting two wires in-line and are UL Listed for direct burial and submersible applications (UL486D). Insulated with specially formulated high-strength dielectric plastisol and molded for precise fit for a direct burial connection. Requires no taping, compounds, heat shrink or cutting-to-size in the INSULATION MIN DIA MAX DIA Approved for use with all conductors with insulation suitable for wet and/or damp locations. (Not recommended for use with extra flexible cable. See Polaris Grey, page 88). * Not suitable for direct burial with THHN/XHHW wire. For use in enclosures only. A properly installed connector will have no more than one conductor per port. IPLW AND ITW MULTI-CABLE CONNECTORS HEX SIZE WEIGHT LBS. field. Supplied with removable access plugs over the hex screws. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 C. Suitable for use with aluminum and/or copper conductors. 600 volts. 90 C. Reusable. (INCHES) LENGTH HEIGHT WIDTH STRIP LENGTH TIGHTENING TORQUE ISW AWG slotted /16 45 ISW AWG / / ISW-3/ /0-1/0 AWG / /8 250 ISW /0 AWG / /8 360 CAT. NO. UPC CODE NO. OF PORTS WIRE RANGE URD/USE THHN/XHHW* INSULATION MIN DIA MAX DIA HEX SIZE WEIGHT LBS. Suitable for connecting multiple wires and are UL Listed (UL486D) for direct burial and submersible applications. Insulated with specially formulated high-strength dielectric plastisol and molded for precise fit for a direct burial connection. Requires no taping, compounds, heat shrink or cuttingto-size in the field. Supplied with removable access plugs over the hex screws. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 C. Suitable for use with aluminum and/or copper conductors. 600 volts. 90 C. (INCHES) LENGTH HEIGHT WIDTH STRIP LENGTH ITW AWG slotted /16 45 IPLW AWG slotted /16 45 IPLW AWG slotted /16 45 IPLW AWG slotted /16 45 IPLW AWG slotted /16 45 ITW AWG / / IPLW AWG / / IPLW AWG / / IPLW AWG / / IPLW AWG / / ITW-3/ /0-1/0 AWG / /8 250 IPLW3/ /0-1/0 AWG / /8 250 IPLW3/ /0-1/0 AWG / /8 250 IPLW3/ /0-1/0 AWG / /8 250 IPLW3/ /0-1/0 AWG / /8 250 ITW /0 AWG / /8 360 IPLW /0 AWG / /8 360 IPLW /0 AWG / /8 360 IPLW /0 AWG / /8 360 IPLW /0 AWG / /8 360 Approved for use with all conductors with insulation suitable for wet and/or damp locations. (Not recommended for use with extra flexible cable. See Polaris Grey, page 88). A properly installed connector will have no more than one conductor per port. TNG. TORQ. 89 NSi POLARIS BLUE CUSTOM CONNECTORS Let us custom engineer and fabricate a UL Listed direct burial and submersible insulated combination and quantity of our standard meet your exact requirements. Wire entry can even be from either side of the connector, for direct burial or below grade use and submersible applications.

18 Cable

19 GENESIS SERIES CABLE Power Limited Fire Alarm Cable Part No Description: 16 AWG 2/C SOL FPLP Compliance: UL Standard 1424; NEC Article 760 Construction: Conductor 16 AWG Solid Bare Copper No. of Conductors 2 Assembly Tubed jacket over twisted insulated conductors Type Color Thickness Diameter Lay Length Insulation Plenum PVC Blk, Red 0.007" nom " nom. 2.5" nom. Type Color Thickness Diameter Legend (Ink Print) Jacket Plenum PVC Red 0.015" nom " nom. HONEYWELL 16 AWG 2/C (ETL) FPLP/CL2P C W/O# XXXXXX-XXX C(ETL) FT6 XXXXFT DEVICE/ZONE A B C D E F Properties Temperature Rating Operating Voltage Capacitance Impedance DC Resistance Flame Rating -20 to 75 o C 300 Volts max. 27 pf/ft nom 60 Ohms nom Ohms/M' at 20 o C UL 910, CSA FT6

20 GENESIS SERIES CABLE Power Limited Fire Alarm Cable Part No Description: 14 AWG 2/C SOL FPLP Compliance: UL Standard 1424; NEC Article 760 Construction: Conductor 14 AWG Solid Bare Copper No. of Conductors 2 Assembly Tubed jacket over twisted insulated conductors Type Color Thickness Diameter Lay Length Insulation Plenum PVC Black, Red 0.007" nom " nom. 3.0" nom. Type Color Thickness Diameter Legend (Ink Print) Jacket Plenum PVC Red 0.015" nom " nom. HONEYWELL 14 AWG 2/C (ETL) FPLP/CL2P C (RoHS) W/O# XXXXXX-XXX C(ETL) FT6 XXXXFT DEVICE/ZONE A B C D E F Properties Temperature Rating Operating Voltage Capacitance Impedance DC Resistance Flame Rating -20 to 75 o C 300 Volts max. 27 pf/ft nom 54 Ohms nom. 2.5 Ohms/M' at 20 o C UL 910, CSA FT6