ACCESSORIES. for Magnalock MODELS MODELS MODELS MAG LOCKS ELECTROMECH LOCKS SPECIALTY LOCKS EXIT DEVICES ENTRY DEVICES ACCESS CONTROL ACCESSORIES
|
|
|
- Julian Cunningham
- 6 years ago
- Views:
Transcription
1 HEB» HEADER EXTENSION BRACKET 90 degree angle brackets Extends narrow headers to permit proper mounting of Magnalocks Use with M32, M62, M82, M38, M68, M370, M380, M670, M680 UHB-BK-12 UHB - 12", Black Anodized UHB-BK-8 UHB - 8", Black Anodized UHB-CL-12 UHB - 12", Clear Anodized UHB-CL-8 UHB - 8", Clear Anodized HEB-1BK-12 HEB - 1 x 1 x 12, Black Anodized HEB-1BK-8 HEB - 1 x 1 x 8, Black Anodized HEB-1CL-12 HEB - 1 x 1 x 12, Clear Anodized HEB-1CL-8 HEB - 1 x 1 x 8, Clear Anodized HEB-2BK-12 HEB - 2 x 2 x 12, Black Anodized HEB-2BK-8 HEB - 2 x 2 x 8, Black Anodized HEB-2CL-12 HEB - 2 x 2 x 12, Clear Anodized HEB-2CL-8 HEB - 2 x 2 x 8, Cear Anodized HEB-3BK-12 HEB - 3 x 3 x 12, Black Anodized HEB-3BK-8 HEB - 3 x 3 x 8, Black Anodized HEB-3CL-12 HEB - 3 x 3 x 12, Clear Anodized HEB-3CL-8 HEB - 3 x 3 x 8, Clear Anodized UHB» UNIVERSAL HEADER BRACKET Used to extend the header 1" or 1-1/2" Provides a concealed wiring chamber Use with M32, M62, M82, M38, M68, M370, M380, M670, M680 SFP» STOP FILLER PLATE Used to fill or extend a door stop Creates a flat mounting surface for the Magnalock Available in 1/4", 3/8", 1/2" and 5/8" thickness, all 1-1/4" wide Use with M32, M62, M82, M38, M68, M370, M380, M670, M680 SFP-1/2BK-12 SFP-1/2BK-8 SFP-1/2CL-12 SFP-1/2CL-8 SFP-1/4BK-12 SFP-1/4BK-8 SFP-1/4CL-12 SFP-1/4CL-8 SFP-3/8BK-12 SFP-3/8BK-8 SFP-3/8CL-12 SFP-3/8CL-8 SFP-5/8BK-12 SFP-5/8BK-8 SFP-5/8CL-12 SFP-5/8CL-8 SFP - 1/2 x 1-1/4 x 12, Black Anodized SFP - 1/2 x 1-1/4 x 8, Black Anodized SFP - 1/2 x 1-1/4 x 12, Clear Anodized SFP - 1/2 x 1-1/4 x 8, Clear Anodized SFP - 1/4 x 1-1/4 x 12, Black Anodized SFP - 1/4 x 1-1/4 x 8, Black Anodized SFP - 1/4 x 1-1/4 x 12, Clear Anodized SFP - 1/4 x 1-1/4 x 8, Clear Anodized SFP - 3/8 x 1-1/4 x 12, Black Anodized SFP - 3/8 x 1-1/4 x 8, Black Anodized SFP - 3/8 x 1-1/4 x 12, Clear Anodized SFP - 3/8 x 1-1/4 x 8, Clear Anodized SFP - 5/8 x 1-1/4 x 12, Black Anodized SFP - 5/8 x 1-1/4 x 8, Black Anodized SFP - 5/8 x 1-1/4 x 12, Clear Anodized SFP - 5/8 x 1-1/4 x 8, Clear Anodized MAG SPECIALTY SUPPLIES TRANSFER 2014 Securitron Magnalock Corp SECURITRON.COM MAGLOCK 33
2 MAG IK» INSTALLATION KIT This convenient, cost effective kit contains everything an installer needs to achieve professional, high quality Securitron Magnalock installations. The IK offers substantial savings over purchasing the same item s separately. Securitron s original installation kit includes the following components: Tool Box Threadlock Heavy Duty Drill Guide 1/8" Cobalt Drill Bit Blind Nut Placement Tool 3/8" Cobalt Drill Bit Sex Bolt M32/M62/M82 3/8" Carbide Drill Bit T-Handle Hex Wrench 1/2" High Speed Drill Bit Hardware Packs M32, M62/M82 Rubber Washers Flat Washers Insulated Crimp Connectors IK Installation Kit Blind Nuts with Collapsing Tool Finish Caps Long Screw Pack Product Installation CD OS» OFFSET STRIKES An offset strike may be required for proper installation of the M62 in aluminum frame door applications M62-OS M62B-OS M62BD-OS M62G-OS M62 - w/ Offset Strike M62 - MBS, w/ Offset Strike M62 - MBS, DPS, w/offset Strike M62 - Conduit, Offset Strike SS» SPLIT STRIKES A pair of Split Strikes may be used for each leaf of a double door with no mullion to provide traffic control using a single magnet M62-SS M62B-SS M62 - w/ Split Strike M62 - MBS, w/ Split Strike SPECIALTY SUPPLIES TRANSFER 2014 Securitron Magnalock Corp SECURITRON.COM MAGLOCK 25
![position of the mounting hole by 1/4" [6mm].](/docs-images/76/73442580/images/3-7.jpg "This is often required to clear the glass on aluminum frame store front doors Includes Offset Strike Plate only AOS-62 AOS-62D AOS-82 Strike")
3 SPECIALTY MAG EXIT DEVICES ENTRY DEVICES HEB / GDB / AKG» FOR GLASS DOOR INSTALLATIONS HEB-3G allows for Magnalock installation on all-glass header when used with AKG GDB permits strike plate installation on a solid glass door AKG permanently bonds to the glass using a special industrial adhesive Strike Plate screws into the bracket, as glass doors cannot be drilled Use HEB-3G with M32, M62, 3" x 3" x 8" with specially milled back AKG Adhesive Kit for GDB GDB Glass Door Bracket HEB-3G HEB - 3 x 3 x 8 for Glass Door, Clear Anodized DCP-12X3 Dress Cover Plate, 3 x 3 x 12 for larger strikes (M680, M380) CWB» CONCRETE/WOOD BRACKET Used on wood or concrete filled metal frames Provides a concealed wire chamber CWB-32BK CWB-32CL CWB-62BK CWB-62CL CWB-82BK CWB-82CL Concrete/Wood Bracket - M32, Black Anodized Concrete/Wood Bracket - M32, Clear Anodized Concrete/Wood Bracket - M62, Black Anodized Concrete/Wood Bracket - M62, Clear Anodized Concrete/Wood Bracket - M82, Black Anodized Concrete/Wood Bracket - M82, Clear Anodized SUPPLIES TRANSFER ASB» ALUMINUM SPACER BRACKET Use when a blade stop requires the Magnalock to be lowered Comes pre-drilled for the mounting bolts and wire Provides a blind nut for surface installation of strike ASB-32BK Alum Frame Spacer Bracket - M32, Black Anodized ASB-32CL Alum Frame Spacer Bracket - M32, Clear Anodized ASB-62BK Alum Frame Spacer Bracket - M62, Black Anodized ASB-62CL Alum Frame Spacer Bracket - M62, Clear Anodized ASB-82BK Alum Frame Spacer Bracket - M82, Black Anodized ASB-82CL Alum Frame Spacer Bracket - M82, Clear Anodized ASCWB-DM62CL Alum 1-1/2" Spacer - Concrete/Wood Bracket, DM62, Clear AOS» OFFSET STRIKES/REPLACEMENT STRIKE PLATES Alters the position of the mounting hole by 1/4" [6mm]. This is often required to clear the glass on aluminum frame store front doors Includes Offset Strike Plate only AOS-62 AOS-62D AOS-82 Strike Plate - M62, Offset Strike Plate - M62D, Offset Strike Plate - M82, Offset MAGLOCK SECURITRON.COM 2014 Securitron Magnalock Corp
4 ASS» SPLIT STRIKES/REPLACEMENT STRIKE PLATES Allows a single M32, M62 or M82 Magnalock to secure a double door at traffic control holding force level Includes Split Strike Plates only ASS-32 ASS-62 ASS-82 Strike Plate M32 - Split Set w/ Fasteners & Sex Bolt Strike Plate M62 - Split Set w/ Fasteners & Sex Bolt Strike Plate M82 - Split Set w/fastners & Sex Bolt ZA» Z BRACKET KITS - ADJUSTABLE Use on in-swing doors with Magnalock "F" options (8-1/2" overall length) Provides 1-1/4" of lateral movement to accommodate most openings and allows for precision adjustments (2-1/4"to 3-1/2" from door/header) Includes an oversized dress cover ZA-32/62BK ZA-32/62CL ZA-32/62SS ZA-82BK ZA-82CL ZA-82SS Adjustable Z-Bracket - M32/62, Black Anodized Adjustable Z-Bracket - M32/62, Clear Anodized Adjustable Z-Bracket - M32/62, Satin Stainless Adjustable Z-Bracket - M82, Black Anodized Adjustable Z-Bracket - M82, Clear Anodized Adjustable Z-Bracket - M82, Satin Stainless EASB» ENERGY ABSORBING SEX BOLT The Energy Absorbing Sex Bolt provides additional protection and shock absorption to augment holding force when a door experiences dynamic forces such as kicks or repeated blows. Used in mental health care and detention ancillary or administrative doors, and perimeter doors. For high-security applications on inflexible doors Replaces the standard Sex Bolt Contains a powerful internal spring that absorbs and dissipates the force of a blow EASB-250 Energy Absorbing Bolt - 1/4" Spacer Kit EASB-32 Energy Absorbing Sex Bolt - Model 32 EASB-62 Energy Absorbing Sex Bolt - Model 62 EASB-82 Energy Absorbing Sex Bolt - Model 82 TDK-1» ACCESSORY FOR THICK DOORS The TDK-1 provides replacement screws so armature plates for the M32, M62, M82, M38 and M68 can be used on doors thicker than 1-3/4", and up to 3" TDK-1 Thick Door Kit MAG SPECIALTY SUPPLIES TRANSFER 2014 Securitron Magnalock Corp SECURITRON.COM MAGLOCK 35
5 SPECIALTY MAG EXIT DEVICES ENTRY DEVICES SUPPLIES TRANSFER SB-1» SEX BOLT REPLACEMENT Replaces armature plate sex bolt for M32, M38, M62, M68, and M82B Magnalocks Available in clear, polished brass or oil rubbed bronze finish SB-1 Sex Bolt - Replacement, Clear SB-1-03 Sex Bolt - Replacement, Polished Brass SB-1-10B Sex Bolt - Replacement, Oil-Rubbed Bronze DC» DRESS COVERS Use with M32, M62, and M82 Install using foam adhesive tape Available in clear, black, polished stainless and polished brass finish DC-32BK DC - M32, Black Anodized DC-32BP DC - M32, Brass Polished DC-32CL DC - M32, Clear Anodized DC-32SP DC - M32, Stainless Polished DC-62BK DC - M62, Black Anodized DC-62BP DC - M62, Brass Polished DC-62CL DC - M62, Clear Anodized DC-62SP DC - M62, Stainless Polished DC-82BK DC - M82, Black Anodized DC-82BP DC - M82, Brass Polished DC-82CL DC - M82, Clear Anodized DC-82SP DC - M82, Stainless Polished DDC» DOUBLE DRESS COVERS Available in clear and black finish For use with a pair of Magnalocks on a double door separated by no more than 2" Not for use with the DM62 Magnalock DDC-32BK DDC-32CL DDC-62BK DDC-62CL DDC-82BK DDC-82CL DDC- M32, Black Anodized DDC - M32, Clear Anodized DDC - M62, Black Anodized DDC - M62, Clear Anodized DDC - M82, Black Anodized DDC - M82, Clear Anodized MAGLOCK SECURITRON.COM 2014 Securitron Magnalock Corp
6 HHD / HHSL / HHSR / HVD» FULL LENGTH HOUSINGS Vertical or horizontal configurations Fit one or two locks (not included) SLR = Single Left Hand Reverse SRR = Single Right Hand Reverse HHD-32 Lock Housing for M32 - Dbl. Horizontal HHD-62 Lock Housing for M62 - Dbl. Horizontal HHD-82 Lock Housing for M82 - Dbl. Horizontal HHSL-32 Lock Housing for M32 - SLR Horizontal HHSL-62 Lock Housing for M62 - SLR Horizontal HHSL-82 Lock Housing for M82 - SLR Horizontal HHSR-32 Lock Housing for M32 - SRR Horizontal HHSR-62 Lock Housing for M62 - SRR Horizontal HHSR-82 Lock Housing for M82 - SRR Horizontal HVD-32 Lock Housing for M32 - Dbl. Vertical HVD-62 Lock Housing for M62 - Dbl. Vertical HVD-82 Lock Housing for M82 - Dbl. Vertical Reference the table below. Indicate size when ordering. B MAG SPECIALTY Model A B C Max Length* HHD " 2.1" 2.35" 96" HHD " 2.6" 3.5" 96" HHD " 2.6" 3.5" 96" HHSL " 2.1" 2.35" 48" HHSL " 2.6" 3.5" 48" HHSL " 2.6" 3.5" 48" HHSR " 2.1" 2.35" 48" HHSR " 2.6" 3.5" 48" HHD Horizontal Housing A C SUPPLIES TRANSFER HHSR " 2.6" 3.5" 48" HVD " 2.1" 2.35" 96" HVD " 2.6" 3.5" 96" HVD " 2.6" 3.5" 96" *Full length housings are individually manufactured to custom specifications up to the maximum length shown Securitron Magnalock Corp SECURITRON.COM MAGLOCK 37
DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
FLEX MOUNT KIT INSTALLATION INSTRUCTIONS FMK-SW (Swing Gates) & FMK-SL (Sliding Gates)
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions FLEX MOUNT KIT INSTALLATION INSTRUCTIONS FMK-SW (Swing
Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
Bulkhead Model Number and
Bulkhead Model Number 96141-3-01 and 96142-3-01 Installing your ProMaster bulkhead is very clear cut following these instructions. Before cutting or drilling in the floor, verify the location of you gas
table of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
DOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
INSTALLATION INSTRUCTIONS FOR SMLS/SMSS Surface Mount Lock Shear & Surface Mount Strike Shear
Securitron Magnalock Corp. Tel 775.355.5625 550 Vista Boulevard Fax 775.355.5633 Sparks, NV 89434 info@securitron.com www.securitron.com ASSA ABLOY, the global leader in door opening solutions INSTALLATION
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
8000 SERIES SERIES HEAVY-DUTY MODELS
GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary
Concealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
ED8000 Series. Pushpad Exit Devices Parts Manual
ED8000 Series Pushpad Exit Devices Parts Manual Table of Contents ED8200A Rim Exit Device...4 ED8200(B) Rim Exit Device...6 ED8400A Surface Vertical Rod Exit Device...8 ED8400 Surface Vertical Rod Exit
4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
Architectural Door & Cabinet Hardware
Architectural Door & Cabinet Hardware TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
Installation Instructions Models: SESD180, DESD180, MESD180 1/4" Semi-Frameless Door and 3/8" In-Line Panel
Models: SESD180, DESD180, MESD180 Scan this Barcode for Parts Bag BP.3143.NLT Thank you for purchasing this outstanding product! This booklet will help you install your units safely and successfully. IMPORTANT:
BLEACHER ASSEMBLY INSTRUCTIONS
CROWDPLEASER BLEACHER ASSEMBLY INSTRUCTIONS NOTE: These instructions are generic to all 2 row through 10 row bleachers. The drawings in this instruction sheet generally show assembly for a 21 foot, six
s tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
Architectural Door & Cabinet Door
Architectural Door & Cabinet Door A1 TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
Andersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section. Clad French Casement Windows...
Andersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section Clad French Casement Windows... Page 3 Part Illustrations... 3 Parts Illustration - Operating Windows... 3 Parts
Salter Industries Spiral Stair
Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",
Heavy-Duty Bypass Track System
Heavy-Duty Bypass Track System Please Note: This track system must be installed with the screws going into a solid surface such as studs or a header. Due to the spacing of the holes on these Brackets,
BioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
INSTALLATION GUIDE Locker With Top Shelf Transit Low Roof & Nissan NV Low Roof ( Aluminum )
INSTALLATION GUIDE 7115 Locker With Top Shelf Transit Low Roof & Nissan NV Low Roof ( Aluminum ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Locker w/ Top Shelf Assembly... 3-5 6-13 Phase
C70 Window Roller Repair Taken from: Heres the problem:
C70 Window Roller Repair Taken from: http://www.volvospeed.com/vs_forum/topic/115086-how-to-c70-window-rollers-permanent-fix/ Heres the problem: This happened to two separate window assemblys on my c70
INSTALLATION INSTRUCTIONS FOR ARCHITECTURAL VALUE SERIES ELECTRIC DOGGING / ELECTRIC LATCH RETRACTION AND "H" MODELS (HURRICANE) Endcap P/N:
103104 January 20, 2009 INSTALLATION INSTRUCTIONS FOR ARCHITECTURAL VALUE SERIES ELECTRIC DOGGING / ELECTRIC LATCH RETRACTION AND "H" MODELS (HURRICANE) ED Electric Dogging ER ELECTRIC LATCH RETRACTION
Installation Instructions
AMPCO Stainless Steel and Baked Enamel Toilet Partitions AMPCO Florida 11400 NW 36 th Avenue Miami, FL 33167 T. 305.821.5700 florida@ampco.com AMPCO Texas 201 Railroad Avenue Sanger, TX 76266 T. 940.458.7401
Product Catalogue. Casements / Holders Plaques Photoluminescent Mounting Materials Custom Graphics Printing. EvacGlow.com
Product Catalogue Casements / Holders Plaques Photoluminescent Mounting Materials Custom Graphics Printing EvacGlow.com Introduction Building evacuation plans, fire evacuation maps and emergency exit signs
GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
AMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
INSTALLATION GUIDE. C30-NH STRAIGHT PARTITION Nissan NV ( Swing Door, Steel )
INSTALLATION GUIDE C30-NH STRAIGHT PARTITION Nissan NV ( Swing Door, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Partition assembly... 3 to 4 5 to 6 Phase 2 - Installation q 2.1 Tips
Pre-Hanging Information
Pre-Hanging Information Difference between Door Slab and Pre-hung Door Door Slab Only Door Slab Only No handle preparation. No deadbolt preparation. No frame or hinges included. Pre-hung door Door unit
Open Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
UNIVERSAL BASES. #60UB - Universal Mounting Base. Same as above for 1/2 inside threads.
UNIVERSAL BASES #60U - Universal Mounting Base. This base can be used for vertical or horizontal mounting. Base is threaded for 3/8 inside threads. Made of bronze material for pastedown or fastening with
OPERATIONS MANUAL. Port-O-Slitter
Tapco Products Company The World Leader in Specialty Tools for the Professional Port-O-Slitter OPERATIONS MANUAL General instructions, set up, accessories and guide to using your portable precision slitting,
INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
Exit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
Stainless Steel Continuous Hinges
TABLE OF CONTENTS A ANSI Standards...2 C Cancellation Notification... 2 Concealed Electric Through-Wire... 4-5 Custom Hole Pattern... 2 Custom Length Hinges... 2 D Dutch Door Hinges... 3 E Electrical Modifications
Privacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS
SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE. FOR ASSISTANCE,
Qwik-Fence Installation Instructions
Qwik-Fence Installation Instructions 1 Tools Required The following installation instructions should be used as a guide for installing Folding Guard Qwik-Fence Partitions. Good common sense and appropriate
FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand
, BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are
WADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.
Universal Carrier Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. The 400 series carrier accommodates most urinal, water-cooler or hanger plate lavatory
11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
EZ-MATRIX I N S TA L L AT I O N I N S T R U C T I O N S EZ-MATRIX
TM I N S TA L L AT I O N I N S T R U C T I O N S READ THESE INSTRUCTIONS page 2 Installer Tips: Installation is best completed with the help of one or two people. Prior to beginning, please read through
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
baldwin 5" High, Solid Brass Solid Brass
Tel (45) 552-5500 www.macpac.com DOOR KNOCKERS BALDWIN door knockers BALDWIN HOUSE NUMBERS 5" High, baldwin COLONIAL 6.5" x 3.5" C/C of bolts: 4" Available w/observ-o-scope* 002-003 Lifetime Pol. Brass
FINISH GROUPS #17 GRP #17 CLEAR
EFFECTIVE FEBRUARY 1, 2018 CONTENTS A3/1 CONTENTS SECTION A3...DOOR CLOSERS PAGE SURFACE MOUNTED CLOSERS... A3/2 A3/3 CALIBRE TM CLOSERS... A3/4 INTERNATIONAL CONCEALED CLOSERS... A3/5 CONCEALED CLOSER
TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
INSTALLATION GUIDE. C30-NL STRAIGHT PARTITION Nissan NV ( Swing Door, Steel )
INSTALLATION GUIDE C30-NL STRAIGHT PARTITION Nissan NV ( Swing Door, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Partition assembly... 3 to 4 5 Phase 2 - Installation q 2.1 Tips on
Shetland Stalls Installation Instructions
Shetland Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 1/9/18 Before you start Kit can accommodate up to 12 wide stall front
Trim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
3000 Series Exit Devices Premier Product
00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification
4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions
WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS
WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com See garage door owner s manual for
55 Series Exit Device
55 Series Exit Device 55 Exit Devices Index Introduction........................................................................... 3 Exit Hardware Rim device............................................................................
SINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
Installation Instructions 1500/1500W/G Wall Guard Important
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation. 2. Install in accordance with manufacturer s installation instructions. Failure
Cellar Hanger ASSEMBLY INSTRUCTIONS
Cellar Hanger ASSEMBLY INSTRUCTIONS CELLAR HANGER Recommended Tools Drill with 1/8 and 1/4 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16, 7/16, and 5/8 Combination Wrench Socket
Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
4-Door Rear XHD Armor Fenders
Page 1/10 Part #11615.02 Page 2/10 1 4 2 3 5 Components 1. Left Rear Fender (1) 2. Right Rear Fender (1) 3. Left Rear Guard (1) 4. Right Rear Guard (1) 5. License Plate Bracket (1) OMIX-ADA TECHNICAL SUPPORT
Casement. The Bronze Craft Corporation CASEMENT HARDWARE. fax
C1 CASEMENT HARDWARE www.bronzecraft.com 800-488-7747 C2 Naval Brass, Satin Brushed 2104 Handle The handle allows for mounting on to the side of the jamb or center mullion and the offset grip ensures ample
The Queen Quilter Professional Quilters Kit Frame
The Queen Quilter Professional Quilters Kit Frame Assembly Instructions Table of Contents: Before you begin......................... Pg. 2 Wood parts............................. Pg. 3 Hardware..............................
Pillar Hanger ASSEMBLY INSTRUCTIONS
Pillar Hanger ASSEMBLY INSTRUCTIONS PILLAR HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket
Bike Locker Model DBL1 & DBL2
Bike Locker Model DBL1 & DBL2 DBL1 & DBL2 are constructed of 99% recycled steel and is available in 20 standard powder coat colors or a galvanized finish. DBL1 & DBL2 store 1 or 2 bikes effortlessly and
Heavy Duty I-Beam Trolley
Heavy Duty I-Beam Trolley ASSEMBLY INSTRUCTIONS I-BEAM TROLLEY Recommended Tools Level Tape Measure Pencil Drill with 1/8, 1/4, and 3/8, Drill Bits and Phillips Bit Socket Wrench with 9/16 Socket I-BEAM
Table of Contents Holders & Stops
Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,
Installation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
Panels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
SENC 150. Cross Feed Installation... Mounting Information... Center reading head... First Steps...
Cross Feed Y Axis on Right Hand Side Cross Feed Installation... * Supplied with encoder hardware M4 x 8mm SHSS Mounting block 1/4-20 x 1/2 SHSS (2) per block *1/4-20 x 1 BHCS (2) or 1/4-20 x 1-1/4 BHCS
Parts Included: Tools Required: Canvas Office Landscape Interiors Off Module 90 Connector Kit Installation and Disassembly for Recycling Instructions
Y Parts Included: Canvas Office Landscape Interiors Off Module 90 Connector Kit Installation and Disassembly for Recycling Instructions FT127.A N Shim A Light Seal B Foam Light Seal C G H Double-Face Tape
installation guide 1 GUIDE#: pwb-assault-004
assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
Monarch XX Series. Crossbar Exit Device
Monarch XX Series Crossbar Exit Device THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet
Equilibrium. Conference Table. Installation Instruction. Revision B 11/07/16
Equilibrium Conference Table Installation Instruction Revision B 11/07/16 Equilibrium End User Agreement Enwork Equilibrium table bases must be installed directly onto a four inch minimum thickness concrete
Triple Bypass System
Triple Bypass System ASSEMBLY INSTRUCTIONS TRIPLE BYPASS SYSTEM Recommended Tools Drill with 1/4 Drill Bit and Phillips Screw Bit 7/16 Combination Wrench Socket Wrench with 7/16 and 9/16 Socket Level Tape
INSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500
INSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500 Specifications: Designed for in-wall installation spanning a minimum of 3 wood studs, 16" on center. Accomodates MWR, PWR and
20 Series Exit Devices Accessories Mullions & Door Kits
20 Series Exit Devices Accessories s & Kits 980 Removable Bottom (2438mm) stock size Up to (3000mm) size 2-1/2" 1-1/2" 1-1/4" 3" 507 Adapter for Narrow Transom Bars Required when soffit is 1-1/4" to 2"
Post & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS
Post & Rail Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail STAGGER RAIL ENDS FOR GREATER STRENGTH ALLOW 1-1/2" GAP ON HINGE SIDE OF GATE AND 1-1/4" ON LATCH SIDE OF GATE HARDWARE DIG HOLES 30" MINIMUM
Windload Post 9100/9600/9900 Installation Instructions
Windload Post 9100/9600/9900 Installation Instructions Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com Wayne-Dalton Corp. P.O. Box 67 Mt. Hope,
(2) 25mm x 20mm x 5mm Adhesive Backed Foam Pads. 100mm x 50mm x 1.0mm Adhesive Backed Foam. (2) Spacer Plates. Passenger/Right Side Frame Mounting
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Frame Mounting 16 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Frame Mounting 8 12mm Hex Nuts 1 Driver/Left Side Top Support 2 10-1.50mm
Installation Instructions
TS SERIES Traditional Square Accessories Installation Instructions " TOWEL BAR.0 " TOWEL BAR.0.90 DOUBLE ROBE HOOK.0.0 " HANDLE. " HANDLE.0 Thank you for selecting American-Standard...the benchmark To
Hinges / Continuous. Hager Continuous Hinges/Pivots. Hager Roton Replacement Moldings
Roton Replacement Moldings s/pivots 780-210M Replacement door leaf molding for 780-210 (HD), 780-211 (HD), 780-213 (HD), 80-045 (HD), 780-046 (HD). Furnished with Allen Head set screws and wrench. Shipped
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
Titan Series Awning Assembly and Installation Instructions
Titan Series Awning Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use work gloves to handle them.
Assembly Instructions
Laminate/Phenolic & 1 Pc Butcherblock Tops Before you begin, please make sure all parts and proper quantities are included. (See on next page) Any parts damaged during shipment must be reported within
Oxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or