Hinges / Continuous. Hager Continuous Hinges/Pivots. Hager Roton Replacement Moldings
|
|
- Magdalene Ball
- 5 years ago
- Views:
Transcription
1 Roton Replacement Moldings s/pivots M Replacement door leaf molding for (HD), (HD), (HD), (HD), (HD). Furnished with Allen Head set screws and wrench. Shipped in stock lengths for trimming in the field M Replacement frame leaf molding for (HD), (HD). Shipped in stock lengths for trimming in the field CL Full Surface, Retrofit Full-surface hinge for any thickness or material with sex bolts both leaves unless otherwise specified. Heavy Duty Available Height: 83 Finish: Alum CL HD CL Full Surface, Narrow or Inset Full Surface, HD Narrow or Inset Full surface retrofit for narrow frame face (7/8 required) HD Model for high frequency or heavy medium frequency doors. Height: 83 Finish: Duro, HD Alum CL Full Surface, Swing Clear Action Retrofit full-surface wide throw hinge. HD Model for high frequency or heavy medium frequency doors. 1-13/16 frame face required. Additional clearance not required. Heavy Duty Available Height: 83 Finish: Alum CL M Replacement frame leaf molding for (HD), (HD) (HD), (HD), (HD), (HD), (HD) Furnished with Allen head set screw and wrench. Shipped in stock lengths for trimming in the field CL HD CL M M M Screw Pkgs. Available Screw Pkgs. Available Screw Pkgs. Available CL toll free
2 Solid Wood Interior Doors For medium frequency 1-3/4 inch solid wood interior doors to 100 lbs., Or low frequency to 150 lbs. This application is intended for square edged doors only. Clearance: 5/16 (8 mm) hinge side plus standard lock side clearance. Fasteners dril-kwick and wood screws. Length options: standard and custom. Door edge protection lip. Offset joint to clear casing. Frame leaf alignment rib for proper hinge location /4 Solid Wood /8 Solid Wood Standard duty for medium frequency 1-3/4 inch doors to 200 lbs. Heavy duty for high frequency 1-3/4 inch doors or heavy medium frequency 1-3/4 inch doors. Clearance: 5/16 (8 mm) hinge side plus standard lockside clearance Fasteners dril-kwick screws. Length options standard and custom. Door reinforcement none required to 200 lbs. Use 16 Lead lined model for hospital x-ray room doors with double row of screws to straddle lead. Specify LL. Door edge protection lip. Fire rating: up to 3 hours. Specify stud or U/L /4 Doors HD 1-3/4 HD Doors LL 1-3/4 Doors lead lined Center Hung Doors Heavy duty for high frequency center hung doors or heavy medium frequency center hung doors. Clearance: none required 3/4 (19 mm) minimum inset. Fasteners: dril-kwick screws. Length options: standard and custom. For center hung door application. Model HD Standard duty for medium frequency doors. Heavy duty for high frequency doors or heavy medium frequency doors. Clearance: 5/16 (8 mm) hinge side plus standard lockside clearance. Fasteners: dril-kwick screws Length options: standard and custom screws Door reinforcement: none required to 200 lbs. Use 16 Lead lined model for hospital x-ray room doors with double row of screws to straddle lead. Specify LL. Frame and door leaf alignment ribs 1/8 (3.2 Mm) inset for proper hinge and door location /4 entry door HD 1-3/4 HD entry door LL 1-3/4 lead lined doors 100 toll free
3 Standard duty for medium frequency doors. Heavy duty for high frequency doors or heavy medium frequency doors. Clearance: 13/16 (21 mm) hinge side plus standard lockside clearance. Fasteners: dril-kwick screws. Length options: standard and custom. Door reinforcement: none required to 200 lbs. Use 16 Safety hinge for kindergartens, nursing homes etc. (When used without frame stop) Concealed Leaf (No Hinge Stop) HD Heavy Duty Concealed Leaf Standard duty for medium frequency doors to 200 lbs. Heavy duty for high frequency doors or heavy medium frequency doors. Clearance: 5/32 (4 mm) frame leaf clearance (1/8 (3 mm) minimum) plus standard lockside clearance. Fasteners dril-kwick and sexbolts. Length options: standard and custom. Frame reinforcement: none required to 200 lbs. Use 16 For center hung door where large edge radius or finger guards require a long reach. Security moldings Half Surface - Center Hung Door HD Heavy Duty Half Surface - Center Hung Door Standard duty for medium frequency doors to 200 lbs. Heavy duty for high frequency doors or heavy medium frequency doors. Clearance: 15/16 (24 mm) hinge side, plus standard lockside clearance. Fasteners dril-kwick screws. Length options: standard and custom. Door reinforcement none required to 200 lbs. Use 16 Frame reinforcement: none required to 200 lbs use 16 For deep inset or flush-with-frame (when using rabbeted frames). Applications, center hung doors, heavy cabinets. Standard duty for medium frequency doors. Heavy duty for high frequency doors or heavy medium frequency doors. Clearance:1/2 (13 mm) hinge side plus standard lockside clearance Fasteners: dril-kwick screws Length options: standard and custom Door reinforcement: none required to 200 lbs. Use 16 Frame reinforcement: none required to 200 lbs. Use 16 For millwork, toilet stall doors, windows and rabbeted bifold doors Inset or Flush w/ Frame HD Heavy Duty Inset or Flush w/ Frame /4 doors or panels HD Heavy Duty 3/4 doors or panels toll free
4 Full Surface Swing Clear Action Standard duty for medium frequency 1-3/4 inch doors. Heavy duty for high frequency 1-3/4 doors or heavy medium frequency doors. Not recommended for doors beveled on the hinge side. Clearance: 5/16 (8 mm) hinge side plus standard lockside clearance. Fasteners: dril-kwick screws. Length options: standard and custom. Door reinforcement: none required to 200 lbs. Use 16 Frame reinforcement: none required to 200 lbs. Use 16 Door edge protection lip. Swing-clear action for patient room doors and handicapped classroom doors. Fire rating: up to 3 hours. Specify stud or U/L /4 door swing clear action HD Heavy Duty 1-3/4 door swing clear action Standard duty for medium frequency doors to 200 lbs. Heavy duty for high frequency doors or heavy medium frequency doors. Clearance: none required for hinge side. Fasteners: dril-kwick and sexbolts Length options: standard and custom Door reinforcement: none required Frame reinforcement: none required to 200 lbs. Use 16 Zero clearance required for hinge side. Can be used with any door and frame material. Security moldings HD Half Surface Continuous Hinge Standard duty for medium frequency doors to 200 lbs. Heavy duty for high frequency doors or heavy medium frequency doors. Clearance: 5/32 (4 mm) frame leaf clearance 1/8 (3 mm) minimum) plus standard lockside clearance. Fasteners: dril-kwick and sexbolts. Length options: standard and custom. Door reinforcement: none required. Frame reinforcement: none required to 200 lbs. Use 16 Frame leaf alignment rib for proper hinge location. 9/32 (7 Mm) inset. Security moldings Half Surface 1-3/ HD Heavy Duty Half Surface 1-3/4 102 toll free
5 100 Series Pin & Barrel Aluminum s 099-FM-100 Edge Mount For all 1 ¾ doors up to 600lbs. Used in lieu of pivots or butt hinges distributing the weight of the door down the entire length of the hinge 099-FS-101 Full Surface 1/8 Inset. For all 1 ¾ doors up to 600lbs. Used to solve door sag problems aligning retrofit doors to their existing frames with no need to readjust weather stripping 099-FS-102 Full Surface Flush Mount. For all 1 ¾ doors up to 600lbs. Used to solve door sag problems aligning retrofit doors to their existing frames 099-HS-103 Half Surface For all 1 ¾ doors up to 600lbs. Used to repair door assemblies where butt hinges have ripped out and frame needs reinforcement 099-EG-108 Edge Guard For all 1 ¾ doors. Used as a full wrap on the lock side of the door which prevents unsightly dents and gouges. Used in conjunction with HG HM-104 Half Mortise For all 1 ¾ doors up to 600lbs. Used to repair doors that are split or have edge damage 099-HG-105 Hinge/guard For all 1 ¾ doors up to 600lbs. Used in conjunction with automatic doors with heavy traffic making the doors adjustable to non-plumb frames & protecting them from gouges & dents. Used in conjunction with EG-108 toll free
6 200 Series Pin & Barrel Cold-Rolled Steel s 099-FM-200 Edge Mount For all 1 ¾ doors up to 600lbs. Used on high traffic, high abuse doors 099-HS FS HM FS EG EG-T-208 Half Surface For all 1 ¾ doors up to 600lbs. Used to replace butt hinges or to reverse the handing or swing of the door without any modification to the existing door Full Surface 1/8 Inset. For all 1 ¾ doors up to 600lbs. Used to repair doors with tight clearances giving a weather tight seal Half Mortise For all 1 ¾ doors up to 600lbs. Used to replace butt hinges or to reverse the handing or swing of the door without any modification to the existing door Full Surface Flush Mount. For all 1 ¾ doors up to 600lbs. Used to repair doors with tight clearances giving a weather tight seal Edge Guard For all 1 ¾ doors. For both square and beveled doors. Used to make doors adjustable to non-plumb frames & to protect the door from gouges & dents Edge Guard For all 1 ¾ doors. For both square and beveled doors. Used to make doors adjustable to non plumb frames & to protect the door from gouges & dents 300 Series Pin & Barrel Stainless Steel s 099-HG HG HG-323 Edge Mount Hinge/Guard For all 1 ¾ doors up to 600lbs. Prevents objects from being placed between door and frame as well as protecting the door from gouges & dents. Used on specialty doors with EG-C-308 Edge Mount Hinge/Guard For all 1 ¾ doors up to 600lbs. Used when the occasional door wrap is needed giving the door full adjustability when fitting non-plumb frames as well as protecting from gouges & dents Edge Mount Hinge/Guard For all 1 ¾ doors up to 600lbs. Used when saving a split door with the two stainless steel leaves sandwiching the door and through bolting it together Also protecting from gouges & dents 104 toll free
7 300 Series Pin & Barrel Stainless Steel s 099-FS-302 Full Surface/ Flush Mount For all 1 ¾ doors up to 600lbs. Used to repair doors with tight clearances giving a weather tight seal 099-FS-321 Full Surface 3/4 Offset., For all 1 ¾ doors up to 600lbs. Used in conjunction with ¾ offset door closers where intermediate pivots have worn and the floor closer can remain 099-HG-305 Hinge Guard For all 1 ¾ doors up to 600lbs. Used to make doors adjustable to nonplum frames & to protect the door from gouges & dents 099-HG-326 Swing Clear Hinge/Guard For all 1¾ doors up to 600lbs. This unique design solves the problem of aligning doors and locking mechanisms crucial in any security application. 099-EG-C-308 Edge Guard For all 1 ¾ doors. For both square and beveled doors Used to protect the door from gouges & dents. Used on specialty doors with HG FM-327 Edge Mount Safety Hinge For all 1¾ doors up to 600lbs. This unique design will prevent any small fingers from being pinched in your elementary school or day care application. Must be used with a cased open type frame 099-HG-310 Swing Clear Hinge/Guard For all 1 ¾ doors up to 600lbs. Used on operating room doors to swing the door completely out of the opening as well as protecting the door from gouges & dents. 099-HG-311 Swing Clear Hinge/Guard For all 1 ¾ doors up to 600lbs. Allows doors to meet ADA requirements Enabling doors in a retrofit application to swing completely out of the opening toll free
8 300 Series Pin & Barrel Stainless s 099-FM-300 Edge Mount For all 1 ¾ doors up to 600lbs. Used on high traffic, high abuse doors 099-FS-301 Full Surface 1/8 Inset For all 1 ¾ doors up to 600lbs. Used to repair doors with tight clearances giving a weather tight seal 099-HS-303 Half Surface For all 1 ¾ doors up to 600lbs.Used to replace butt hinges or to reverse the handing or swing of the door without any modification to the existing door 099-HM-304 Half Mortise For all 1 ¾ doors up to 600lbs. Used to replace butt hinges or to reverse the handing or swing of the door without any modification to the existing door 099-HG-306 Hinge/Guard For all 1 ¾ doors up to 600lbs. Used to reverse the swing of the door & to protect the door from gouges & dents 099-EG-308 Edge Guard For all 1 ¾ doors. For both square and beveled doors. Used to make doors adjustable to nonplumb frames & to protect the door from gouges & dents 099-EG-T-308 Edge Guard For all 1 ¾ doors. For both square and beveled doors Used to make doors adjustable & to protect the door from gouges & dents as well as added security acting as a latch protector 099-FS-SC-309 Full Surf. Swing Clear For all 1 ¾ doors Used to ensure a door opened 90 is entirely removed from the opening. Most Commonly Used on Retrofit Jobs. 106 toll free
9 400 Series Aluminum Pin & Barrel Toilet Partition Hinges 099-FM-400-TP Spring Loaded For all 1 ¾ doors up to 80 lbs. Ideal for damp or corrosive environments 099-HG-406-TP 1/8 Offset Spring Loaded These unique hinges are designed for use with 1 1/4 pilasters and 1 doors. The hinge was developed to protect the door and pilaster edges. Optional Adjusta- Screw fasteners allow for correction when pilasters are not installed plumb or aligned 099-FM-417-TP Flush Spring Loaded This style fits bull nose, metal partitions with 1 doors and pilasters. By hugging the round edges of the partition, positive contact can be made during installation. The hardware is hidden, giving a thin, clean look. 099-FS-402-TP Flush Spring Loaded Use this hinge when the pilaster and door are flush with each other. The standard security covers conceal fasteners and all mounting hardware to give a clean, finished appearance. 099-FS-401-TP 1/8 Offset Spring loaded Spring Loaded Use this hinge with 1 1/4 pilasters and 1 doors. Standard covers conceal fasteners and all mounting hardware to give a clean, finished appearance 099-HG-407-TP Flush Spring Loaded These unique hinges are designed for use with 1 pilasters and doors. For extra protection and slim, clean appearance, the hinge is designed to wrap around the pilaster and door edges. Optional Adjusta- Screw fasteners allow for correction when pilasters are not installed plumb or aligned. 099-FM-416-TP 1/8 Offset Spring Loaded This style fits bull nose, metal partitions with 1 doors and 1-1/4 pilasters. By hugging the round edges of the partition, positive contact can be made during installation. The hardware is hidden, giving a thin, clean look. toll free
10 500 Series Stainless Steel Pin & Barrel Toilet Partition Hinges 099-FS-501-TP 1/8 Offset Non-Spring Use this hinge with 1 1/4 pilasters and 1 doors. Standard covers conceal fasteners and all mounting hardware to give a clean, finished appearance 099-HG-507-TP Flush Non-Spring Ideal for use with corrian or marble type partitions, the slim clean design provides door and pilaster protection. This hinge is also adjustable with optional Adjusta- Screw fasteners for 1/2 width correction 099-FS-502-TP Flush Non-Spring For pilasters and doors that are flush with each other. This stainless steel continuous toilet partition hinge is just right for constructing a new facility, where high volume of abusive traffic can be found. 099-FM-500-TP Edge Mount Non-Spring Ideal for use in damp or corrosive environments. This hinge was designed for 1 3/4 stainless steel doors and frames. The addition of optional tamper proof security screws make this an excellent hinge for abusive traffic 099-HG-506-TP 1/8 Offset Non-Spring Ideal for use with corrian or marble type partitions with 1 1/4 pilaster and 1 door. This hinge provides door and pilaster edge protection and is adjustable with optional Adjusta-Screw fasteners for 1/2 width correction 099-FS-510-TP Flush Non-Spring This hinge was designed for detention facilities or areas where vandalism is common. The hinge can be mechanically fastened or welded in place for optimum security. 108 toll free
11 800 Series Aluminum Pin & Barrel Toilet Partition Hinges 099-FM-800-TP Edge Mount Non Spring For all 1 ¾ doors up to 200 lbs. Ideal for damp or corrosive environments 099-HG-806-TP 1/8 Offset Non Spring These unique hinges are designed for use with 1 1/4 pilasters and 1 doors. The hinge was developed to protect the door and pilaster edges. Optional Adjusta- Screw fasteners allow for correction when pilasters are not installed plumb or aligned 099-FM-817-TP Flush Non Spring This style fits bull nose, metal partitions with 1 doors and pilasters. By hugging the round edges of the partition, positive contact can be made during installation. The hardware is hidden, giving a thin, clean look. 099-FS-801-TP 1/8 Offset Non Spring Use this hinge with 1 1/4 pilasters and 1 doors. Standard covers conceal fasteners and all mounting hardware to give a clean, finished appearance 099-FS-802-TP Flush Non Spring Use this hinge when the pilaster and doors are flush with each other. The standard security covers conceal fasteners and mounting hardware to give a clean, finished appearance. 099-FM-816-TP 1/8 Offset Non Spring This style fits bull nose, metal partitions with 1 doors and 1 1/4 pilasters. By hugging the round edges of the partition, positive contact can be made during installation. The hardware is hidden, a thin, clean look. 099-HG-807-TP Flush Non-Spring These unique hinges are designed for use with 1 pilasters and doors. For extra protection and slim, clean appearance, the hinge is designed to wrap around the pilaster and door edges. Optional Adjusta- Screw fasteners allow for correction when pilasters are not installed plumb or aligned toll free
12 900 Series Stainless Steel Pin & Barrel Toilet Partition Hinges 099-FM-900-TP Spring Loaded Ideal for use in damp or corrosive environments. This hinge was designed for 1 3/4 stainless steel doors and frames. The addition of optional tamper proof security screws make this an excellent hinge for abusive traffic 099-HG-906-TP 1/8 Offset Spring Loaded Ideal for use with corrian or marble type partitions with 1 1/4 pilaster and 1 door. This hinge provides door and pilaster edge protection and is adjustable with optional Adjusta-Screw fasteners for 1/2 width correction 099-FS-901-TP 1/8 Offset Spring loaded Use this hinge with 1 1/4 pilasters and 1 doors. Standard covers conceal fasteners and all mounting hardware to give a clean, finished appearance 099-FS-902-TP Flush Spring Loaded For pilasters and doors that are flush with each other. This stainless steel continuous toilet partition hinge is just right for retrofit or constructing a new facility, where high volume of abusive traffic can be found. 099-HG-907-TP Flush Spring Loaded Ideal for use with corrian or marble type partitions, the slim clean design provides door and pilaster protection. This hinge is also adjustable with optional Adjusta- Screw fasteners for 1/2 width correction 099-FS-910-TP Flush Spring Loaded This hinge was designed for detention facilities or areas where vandalism common. The hinge can be mechanically fastened or welded in place for optimum security. 110 toll free
13 1100 Series Pin & Barrel Aluminum s 099-FM-1100 Edge Mount Self-Aligning For all 1¾ doors up to 300lbs. Used on store front entry systems and aluminum curtainwall projects. 099-FM-1111 Edge Mount Self-Aligning For all 1¾ doors up to 300lbs. Used on store front entry systems and aluminum curtainwall projects Series Pin & Barrel Stainless Steel Secunty Hinges 099-FS-3502 Full Surface Security Hinge Used for solving door sag problems in Correctional facilities and other high security locations. Prison doors, gates, extremely tall doors and extra heavy doors are all good Candidates 099-HG-3505 Hinge Guard Security Hinge Allows an institute to secure openings to non-plumb frames using its unique Adjustable features. 099-FS-3501 Full Surface Security Hinge 1/8 Inset. The 1/8 inset allows perfect alignment for retrofitting of doors in correctional facilities and other high security locations. Prison doors, gates, extremely tall doors and extra heavy doors are all good candidates 099-FM-3500 Edge Mount Security Hinge For all 2 doors up to 900 lbs. Used for high traffic high abuse doors suited for correctional facilities and other high security locations. Prison doors, gates, extremely tall doors and extra heavy doors are all good candidates 112 toll free
14 Select Product Continuous Gear Hinges With conventional hinging systems, the top hinge or pivot handles close to 100% of the opening force of the door. With heavy usage, the top hinge or pivot can experience early, excessive wear, creating a failed entrance. A continuous gear hinge bonds the door and frame into an integrate sag-free unit and kick-back energy is disipated along the length of the door and frame. This improved engineering design has indisputable advantages over two and three hinge/pivot systems, and adds years of trouble-free, maintnance-free life to the entrance. Features: Full length door height support. Streamlined, pleasing-to-the-eye appearance. No exposed screws, bolts or pins and knuckles. Anodized aluminum finish won t rust. Weather-proof, tamper-proof and noise reduction features. No cutouts or reinforcements in doors and frames Retrofit installation with existing doors & frames is easy Long entrance life -tested at over 1,000,000 cycles. Pin less assembly of 3 interlocking extrusions. Chemically lubricated bearings. Templated screw hole pattern. Individually boxed for easy shipping. SL-11HD SL-21/SL-21HD SL-11HD 83 surface hinge for permanent replacement for heavy duty entrances. Heavy duty for high frequency doors. Weight: approx. 6 Lbs. Rating: SL-11 HD (heavy duty) for high frequency or heavy medium frequency doors weighing up to 450 Lbs. 101-SL 11 HD CLEAR 101-SL11HD DURO SL-21/SL-21HD Full surface hinge for permanent replacement for heavy duty entrances using existing door and frame. Also for new or existing entrances where the door must swing completely out of the frame opening. Weight: Approx. 8 Lbs Rating, SL 21 standard duty for medium frequency doors weighing up to 200 Lbs. SL-21 HD (heavy duty) for high frequency or heavy medium frequency doors to 450 Lbs. 101-SL21CLEAR 101-SL21 DURO 101-SL21 HD CLEAR 101-SL21 HD DURO SL-57/SL-57HD Full surface hinge for permanent replacement for heavy duty entrances using existing door and frame. For Installation with narrow or Inset frames with minimum 7/8 face width. Weight: Approx. 8 Lbs. Rating: SL-57 standard duty for medium frequency doors weighing up to 200 Ibs. SL-21 HD (heavy duty) for high frequency or heavy medium frequency doors weighing up to 450 Lbs. 101-SL57CLEAR 101-SL57DURO 101-SL57HD CLEAR 101-SL57HDDURO SL-57/SL-57HD Parts 101-SLM21 85CL ST 101-SLM21 85BR ST Screw Pack Screw Pack toll free
300 Series Pin & Barrel Type Continuous Stainless Steel Hinges
www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door
More informationStainless Steel Continuous Hinges
Stainless Steel Continuous Hinges Why Continuous? Hager Companies heavy duty stainless steel continuous hinges are designed and engineered to evenly distribute door weight along the full length of the
More informationAluminum Continuous Geared Hinges
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
More informationFire Rating 3 hours- hollow metal doors mounted singly 90 minutes- hollow metal and composite core wood fire doors 20 minutes- wood doors
FM-300 Edge Mount 260 Santa Fe Street, Pomona, CA 91767 800-872-3267 909-632-2300 800-232-6752 fax www.markar.com Heavy-duty 14 Gauge stainless steel US32D Satin Stainless Steel (630) Grade 1 4'0" maximum
More informationDOORS, HINGES, PIVOTS
Section Table of Contents DOORS,, PIVOTS SECTION 3 D Door Frames... 94 Doors... 94 Door Sweeps... 96 H Hinges... 95 100 N P Hinge Pins... 99 NSP Pivots... 100 Pivots... 100 Vendors ABH... 95 Adams Rite...
More informationRoton Continuous Geared Hinges
Roton Continuous Geared Hinges You design and build structures that need to withstand the realities of daily use. Hager s engineers and product development team understand how building entrances and exits
More informationArchitectural Door Accessories. Markar Continuous Hinges
Architectural Door Accessories Why Continuous Hinges? Hinge failure most commonly begins when doors are opened beyond stop device limits. The resulting kickback shock to the hinges can surpass 1000 lbs.
More informationContinuous Geared Hinges
Standard Lengths Cal-Royal continuous hinge length provides for actual threshold clearance, head clearance and door height allowances for carpeting. Other lengths may be ordered as non-standard items.
More informationExtend the life of your high-traffic doors
08 70 00/SEL BuyLine 1982 Extend the life of your high-traffic doors Unbeatable durability guarantee page 2 U.S. State Department certification page 3 Geared continuous hinges pages 4-5 Pin & Barrel continuous
More informationWARRAntY & HInGE types
McKinney Warranty McKinney products are guaranteed to be free of defects in both workmanship and materials for a period of one year. Any bending, defacing or modification of our product after leaving the
More informationCONTINUOUS HINGES ALUMINUM GEARED HINGES
ID ONTINUO GEAR HINGES ONTINUO HINGES ALUMINUM GEARED HINGES ID ontinuous Gear Hinges are all heavy duty. All hinges have double the number of bearings of standard duty hinges and are pin less. There are
More informationStainless Steel Continuous Hinges
TABLE OF CONTENTS A ANSI Standards...2 C Cancellation Notification... 2 Concealed Electric Through-Wire... 4-5 Custom Hole Pattern... 2 Custom Length Hinges... 2 D Dutch Door Hinges... 3 E Electrical Modifications
More informationMcKINNEY Hinge Catalog Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible)
Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible) T2774 or furnished in : on hinge side specify T4774) 4 1 2 114.3.134 All 5K plain bearing standard weight half mortise
More informationcontinuous GEARED HingeS
continuous GEARED HingeS Numerical Index: Fasteners: HD1100... CH2 HD1400... CH4 HD1800... CH3 HD2100... CH9 HD2400... CH5 HD2700... CH6 HD4100... CH7 HD4200... CH12 HD5300... CH10 HD5400... CH11 HD5700...
More informationCheckmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
More informationSTAINLESS STEEL CONTINUOUS HINGES
STAINLESS STEEL ONTINUO HINGES ID stainless steel hinges are full height piano hinges that provide support for the full height of the door. For doors up to 600 lbs. 0 maximum door width Hinge leafs are
More informationWhat Is a Continuous Geared Aluminum Hinge
What Is a Continuous Geared Aluminum Hinge Unlike a conventional hinge, a Continuous Geared Aluminum Hinge has no pin. Also it is not like a piano hinge either, which has 50% of each knuckle cut awa, and
More informationHINGES SPECIFICATIONS. Hinge Chart - General Specifications
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
More informations tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
More information4 1/2" x 4 1/2" x 3/16" Thick Stainless Steel, Investment Cast Full Mortise, Hospital Tip
NW 645FM STAINLESS STEEL HINGE Material: Stainless Steel, Investment Cast Pin: Stainless Steel, Concealed & Non-Removable Bearings: Anti-Friction Bearings, Maintenance-Free Capacity: 300lb Door (3 Hinges)!"
More informationContinuous Hinges NEW! Pricing Guide. Aluminum Geared Stainless Steel Pin & Barrel. Effective August 11, 2008
Pricing Guide Effective August 11, 2008 Replaces January 14, 2008 pricing guide. List prices subject to change without notice. Pin & Barrel PRICE REDUCTION! Effective 9/15/08 See pages 10-11 Continuous
More informationCOMMERCIAL GRADE HINGES
SECTION D COMMERCIAL GRADE HINGES D- Wrought Steel Full Mortise Ball Bearing Template Hinges D- Wrought Steel Full Mortise Plain Bearing Template Hinges D- Stainless Steel Full Mortise Plain & Ball Bearing
More information2010 Condensed Catalog
2010 Condensed Catalog INDUSTRY-LEADING SERVICE The Hager products on the following pages are known and used the world over because of their legendary quality and practical value. But for 160 years, Hager
More informationPivots / Padlocks / Hasps
/ Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,
More informationHINGES SPECIFICATIONS
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
More informationProduct Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-33-5625 2 Table of Contents Full Mortise Hinges, Standard Weight... Full Mortise Hinges, Heavy Weight... 8 Half Mortise Hinges, Standard Weight... 8 Full Mortise
More informationANSI/BHMA A Revision of ANSI/BHMA A
ANSI/BHMA A156.26-2012 Revision of ANSI/BHMA A156.26-2006 AMERICAN NATIONAL STANDARD FOR CONTINUOUS HINGES SPONSOR BUILDERS HARDWARE MANUFACTURERS ASSOCIATION, INC. Revision B 2/15/2017 Formatted: Centered
More informationTrim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
More information400 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Overhead Holders. Closer-Holder Packages
Checkmate and Stops General Information Overhead stops are used to protect door assemblies.they cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism. By limiting
More informationHookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
More informationArchitectural Hardware
Architectural Hardware Surface Closers Precision Architectural Closers are designed for heavy duty commercial use. With an adjustable power tension, these closers can handle the lightest ADA Compliant
More information50-year lifespan. ends repeated door repairs. Unequalled durability page 2. Qualify for LEED points page 3
50-year lifespan ends repeated door repairs Unequalled durability page 2 Qualify for LEED points page 3 U.S. State Dept. certification page 5 GEARED aluminum continuous hinges pages 6-8 Electrically equipped
More informationDOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Special-Lite Restroom Partitions IMPORTANT - BEFORE YOU START... 1. Read through these installation instructions first to understand the order of work. 2. Check all components
More informationSteel Hawk 4300 Electrified Deadlatch (elatch)
STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or
More informationC. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationHeavy-Duty Floor Closers
Complete Premium Door Control Concealed Closers for Maximum Efficiency, Heavy and High Traffic Openings General Information Introduction Floor closers provide the best mechanical means to support and control
More informationInfinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
More informationLifetime Warranty on Commercial Grade Hinges
Lifetime Warranty on Commercial Grade Hinges BHMA CERTIFIED CAL-ROYAL Hinges are VALUE and a clear advantage to you. At CAL-ROYAL we strive for quality and excellence with service being our number one
More informationLOCKER SPECIFIERS GUIDE. The standard of excellence for business, industry and institutions. Lockers Cabinets Shelving
LOCKER SPECIFIERS GUIDE Lockers Cabinets Shelving The standard of excellence for business, industry and institutions FINISH GUIDE NANO METAL ROLLER LATCHING SYSTEM For unmatched security, nano metal roller
More informationINSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
More informationElectrical Power Transfer Products
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
More informationSpecialty Closers. High-End Residential High-End Security Gate Solutions
Specialty Closers High-End Residential High-End Security Gate Solutions TABLE OF CONTENTS General Information... 3 How to Select Product... 4 Options... 5 Certifications... 6 Limited Warranty... 6 Specifications...
More informationThis section describes the design requirements and materials/products for door hardware.
Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran
More informationMEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
More informationBUILDERS HARDWARE Catalog Number 134 July 2010
BUILDERS HARDWARE Catalog Number 134 July 2010 Bommer Industries, Inc. P.O. Box 187 19810 Asheville Highway Landrum, South Carolina 29356 www.bommer.com Phone : 864-457 - 3301 Phone : 800-334 - 1654 Fax
More informationMcKINNEY Builder s Hardware Catalog #4
McKINNEY Builder s Hardware Catalog #4 McKINNEY is comprised of a world class team of highly skilled people focused on exceeding customer needs through innovation and flexibility in the manufacture of
More informationContents. The undisputed leader in door accessory hardware /ING BuyLine 2600
08 71 00/ING BuyLine 2600 STEELCRAFT The undisputed leader in door accessory hardware. For more than 120 years Ives has produced a full line of top quality building hardware that delivers the utmost application
More informationBASE & WALL CABINET SETUP GUIDE BY SUNSTONE
BASE & WALL CABINET SETUP GUIDE BY SUNSTONE Read all instructions before you install cabinet. Very important to follow each step in order as detailed in this Instruction Guide!!! To installer or person
More information60-year lifespan ends repeated door repairs
60-year lifespan ends repeated door repairs UNEQUALED DURABILITY, GUARANTEED 2 25,000,000 CYCLE TESTING 3 STATE DEPT. CERTIFICATION 4 GEARED ALUMINUM CONTINUOUS HINGES 5 ELECTRICALLY MODIFIED GEARED HINGES
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
More informationASSA ABLOY. Model W91 Overhead Concealed Wood Frame Installation Instructions IMPORTANT: BEFORE INSTALLING: TO DETERMINE HAND OF YOUR DOOR:
Model W91 Overhead Concealed s Wood Frame Installation Instructions *Butt or 3/4 Offset Pivot Hung, Multi Sized 1-3, 3-6 Non-Hold Open and Hold Open Models *Other means except 4-1/2" x 4-1/2" or 3/4" offset
More informationACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
More informationSECTION FINISH HARDWARE
SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings
More information2.01 Standard Entrances Description
2.01 Standard Entrances Description Description Tubelite Standard Entrances have an outstanding reputation for craftsmanship and strength. The Narrow Stile Door has a face dimension of 2 1/8" and is designed
More informationSeries D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow
More informationPivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors
Pivot and Pivot Sets Architectural Solutions for Durable and Efficient Hanging of Doors TABLE OF CONTENTS General Information... 4 How to Select Product... 5 Options... 6 Certifications... 6 Limited Warranty...
More informationCommercial Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 75-77 Emergency Stop Release... 14 F Fasteners...9-10 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)...
More informationINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Soild Phenolic Series contents page 1080 DuraLineSeries...2-21 1180 DuraLineSeries...2-21 2080 DuraLineSeries Maximum Privacy...22-41 2180 DuraLineSeries Maximum Privacy...22-41
More informationBB1068 / BB1099 SERIES
068 / 099 SRIS LL RING TMPLT UTT HINGS HVY WIGHT Non-handed ase material: steel for series 068, stainless steel for series 099 High grade plated finishes Standard non-rising non-removable pin (NRP) Standard
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review
More informationTable of Contents Holders & Stops
Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,
More informationL-Series Commercial Locks
L-Series Commercial Locks Contents 4 L-Series Commercial Locks 6 Schlage L9000 Series 7 Schlage L400 Series 8 M Collection Decorative Lever Designs and Finishes 10 Standard Lever Designs and Finishes 12
More informationMANUFACTURING INC. Specifications
Page 1 of 4 GENERAL 11 Aluminum security screen doors must be tested by a recognized testing laboratory to conform to SMA 6001-2002 Proposed American National Standard Specifications for Metal Protection
More informationOwner s Maintenance Section
Owner s Maintenance Section Table of Contents Heavy Duty 1. Arm Loosening 2. Weather Changes & Closing Speed Adjustments 3. Door Out of Plumb Offset 4. Door Out of Plumb Center Hung 5. Door Sagging Vertical
More informationTECHNICAL DATA SHEET STANDARD STEEL FRAMES SPECIFICATIONS MESKER STANDARD STEEL FRAMES
DS-201-1 STANDARD STEEL FRAMES SPECIFICATIONS STANDARD STEEL FRAMES 1. Frames shall be manufactured by Mesker Door Incorporated and designated as F-416 (16 GA) or F-414 (14 GA) for 1 3/4 doors, F-412 for
More information4000 Series MS Deadlock Strikes
ACCESSORIES 4000 SERIES MS DEADLOCK S A-1 4000 Series MS Deadlock Strikes ALUMINUM 4000 Series MS Deadlock Strikes add aesthetics and finish to strike cutouts in jambs. HOLLOW METAL The majority of Adams
More informationSenior Swing. Caution
*740132* 740132 2800 Overhead Concealed Series 9500 Surface Applied Series Senior Swing Installation Instructions Caution LCN Senior Swing The Senior Swing Power Operator System is a low energy product
More informationFine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
More informationAdams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
More informationEncore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationMetal Sound Retardant Door Hardware Information Bulletin
574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Metal Sound Retardant Door Hardware Information Bulletin
More informationIves - Residential 07 WINDOW LOCKS 2 ELBOW CATCH 25 SCREEN DOOR PULL 026 BAR WINDOW LIFT
07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-AMERICAN BUILDING
More informationHeavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationIntroduction. BAHCO g Boston Architectural Hinge Company. Dear Customer,
g Introduction Dear Customer, Welcome to. BAHCO is a manufacturer and distributor of architectural grade hinges in the greater Boston area. At BAHCO we have a motivated team of people who are driven by
More informationMasonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
More informationCheckmate Stops & Holders
Checkmate Stops & Holders TABLE OF CONTENTS introduction Sit moluptatur, ut quae dolorro et eatia quam, tecesed igendam, autemolor sunt. Ucil isi doloreium fugia doluptae ipsunt evellab orehenti debissi
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS
PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers
More informationBUILDERS HARDWARE Catalog Number 134 July 2010
BUILDERS HARDWARE Catalog Number 134 July 2010 Bommer Industries, Inc. P.O. Box 187 19810 Asheville Highway Landrum, South Carolina 29356 www.bommer.com Phone : 864-457 - 3301 Phone : 800-334 - 1654 Fax
More informationMeasuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware
Recommendations for Measuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware By Keith E. Pardoe Speed, accuracy, and above all consistency are essential when determining the clearance
More informationYour global resource for quality commercial door hardware. Euroline Catalog Euroline Catalog
Your global resource for quality commercial door hardware. Catalog Catalog More for your door than any other brand. TM Industry-Leading Service For more than 158 years, Hager Companies has led the industry
More information350/500 Heavy Wall TM IR Entrances
SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile
More informationEXIT DEVICE OPERATION FIRE DOOR LABELS, STRIKES AND FRAME SCREWS FOR INFORMATION CALL OR VISIT RITEDOOR.COM
RECORD & LABELS WHAT THIS OWNER'S CAN DO FOR YOU It explains exactly how The Rite Door operates. It explains periodic maintenance requirements necessary to assure reliable operation. It explains simple
More informationInstallation Manual. Solid Plastic Toilet Partitions. IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.:
Installation Manual Solid Plastic Toilet Partitions Toilet Partitions & Lockers IN THE U.S.A.: Hadrian Inc., 7420 Clover Avenue, Mentor, OH 44060 Telephone: 440-942-9118 Fax: 440-942-9618 U.S. toll free
More informationMusic Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance
1.00 General 1.01 Summary Music Area Casework A. This section includes the following Scope of Work as referred to in the plans: 1. Thermally Fused Laminate manufactured casework, for use in music areas,
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
More informationhidden perfection SYSTEM 3
hidden perfection APPLICATIONS System 3 is the perfect solution for 360º rotating doors: TABLE OF CONTENTS FRITSJURGENS 05 Hidden Perfection 06 Perfection all around 09 Designed to stand the test of time
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationHinge not swaged figure 1. Hinge not swaged figure 2. Hinge swaged (standard) figure 3. Hinge swaged (standard) figure 4 16 "
MAYFLOWER SALES COMPANY, INC. General General Architectural Hinge The hinges are one of the most active components of an opening combined with the lock, exit device, and closers. Hardware in general is
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED
More informationIMPORTANT: installation. FLOOR ANCHORED CEILING HUNG OVERHEAD BRACED FLOOR-TO- CEILING ANCHORED
INSTALLATION INSTRUCTIONS MAXIMUM PRIVACY COMPACT LAMINATE TOILET PARTITIONS 2080 DuraLineSeries 2180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and
More informationArchitectural Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 84-86 Emergency Stop Release... 15 D Detention Food Pass Through Hinge... 36 Detention Hinge (IHT)... 24, 32, 35 Detention
More informationInstall Instructions. NewAge Steel Welded Tall Locker
Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x
More informationInstallation Manual for Metal Toilet Partitions Standard Series
For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations
More informationThese door closers should NOT be installed on the exposed side (weather side) of exterior doors. WOOD 3/16" 1/4"- 20
Hollow-metal doors require channel or box-type reinforcement when thru-bolt mount is specified. Hold open arms are not permitted on fire doors. Sex-bolts may be required for wood or plastic faced fire
More informationMarkar Price List Pemko Manufacturing Co.
Markar Price List 2012-2014 Pemko Manufacturing Co. Warranties...3 Terms and Conditions...4-5 Hinge Finishes...6-7 Hinge Numbering System and Standard Lengths...8-9 Continuous Hinge Modifications...10
More informationMcKINNEY Hinge Catalog Hinge Types
Hinge Types McKINNEY offers the broadest range of full mortise hinges in a variety of metals, finishes, sizes, and weights to meet all your load bearing and security applications. They include two, three,
More information