COMMERCIAL GRADE HINGES
|
|
- Clarissa McKenzie
- 5 years ago
- Views:
Transcription
1 SECTION D COMMERCIAL GRADE HINGES D- Wrought Steel Full Mortise Ball Bearing Template Hinges D- Wrought Steel Full Mortise Plain Bearing Template Hinges D- Stainless Steel Full Mortise Plain & Ball Bearing Template Hinges D-4 Heavyweight Wrought and Stainless Steel Template Hinges D-5 Extruded Solid Brass Ball Bearing Non-Template Hinges Solid Brass Plain Bearing Template Hinges D-6 Full and Half Surface Ball Bearing Template Hinges Half Surface Plain Bearing Template Hinges Half Mortise Plain & Ball Bearing Template Hinges D-7 Single Acting U.L. Trimline Spring Hinges D-8 Single Acting, Full Mortise & Half Surface Template Spring Hinges D-9 Spring Action Template Hinges D-0 Full Mortise Door Butts & Non-Corrosive Stainless Steel Door Hinges D- Highly Polished Residential Door Hinges D- Lightweight Template Hinges D- Introduction Roton Hinges D-4 Introduction Roton Hinges D-5 Roton Hinges Pricing D-6 Roton Full Surface Hinges D-7 Roton Full Surface Hinges D-8 Roton Concealed Leaf Hinges D-9 Roton Concealed Leaf Hinges 780- D-0 Roton Half Surface Hinges D- Metal Frame Silencers Double Action Floor Spring Hinges D- Automatic Hinge Pin Door Closer Adjustable Coil Spring D- Sex Bolts, Thru Bolts & Grommet Nuts TRANS-ATLANTIC CO 440 Fairmount Ave., Phila., PA 9 PH: FX:
2 GENERAL HINGE INFORMATION APPLICATIoN DETERMINES TyPE of HINGE FULL MoRTISE Wood Doors, Wood Frame FULL MoRTISE Wood Doors, Hollow Metal Frame FULL MoRTISE Hollow Metal Doors, Hollow Metal Frame HALF MoRTISE Hollow Metal Doors, Channel Iron Frame HALF SURFACE Wood Doors, Wood Frame HALF SURFACE Mineral Core Doors, Hollow Metal Frame FULL SURFACE Mineral Core Doors, Channel Iron Frame FULL SURFACE Hollow Metal Doors, Channel Iron Frame SWING CLEAR FULL MoRTISE Wood Doors, Hollow Metal Frame SWING CLEAR HALF MoRTISE Wood Doors, Channel Iron Frame SWING CLEAR HALF SURFACE Mineral Core Doors, Hollow Metal Frame SWING CLEAR FULL SURFACE Mineral Core Doors, Channel Iron Frame PIvoT REINFoRCED FULL MoRTISE Hollow Metal Doors, Hollow Metal Frame PIvoT REINFoRCED FULL MoRTISE Wood Doors, Hollow Metal Frame CoNCEALED FULL MoRTISE Wood Doors, Hollow Metal Frame, 0º Maximum Swing D
3 WRoUGHT STEEL STANDARD WEIGHT TRIMLINE FULL MoRTISE BALL BEARING TEMPLATE HINGES T-BB79 All hinges are WROUGHT STEEL, Ball Bearing, Full Mortise with loose, non-rising flat button tip pins. SPECIFICATIoNS Prices Substantially Reduced! Hinges: All hinges are WROUGHT STEEL, plain bearing, full mortise, with loose flat button tip pins Metal: All hinges are WROUGHT STEEL Template: All hinges conform with standard USA Templates Federal Specs: FF-H 6C, ANSI A56. (NRP): Non-Rising Pin Feature: ALL HINGES ALSo AvAILABLE WITH NRP FEATURE. SAME AS STANLEy AND HAGER. NRP WHERE NoT SHoWN ADD 50 EACH. Round Corner Please note that most finishes in sizes 4"x 4", ¹ ₄ - Hinges: 4¹ ₂"x 4", 4¹ ₂"x 4¹ ₂" also available with ¹ ₄ RC. Prices for RC same as regular hinges. Gauge: (Hinge Thickness) Approx. Weight Per Pair GAUGE WEIGHT ¹ ₂" x¹ ₂"..4 lbs 4" x 4".0.8 lbs 4¹ ₂" x4" 4¹ ₂" x4¹ ₂".4. lbs 5" x 4" 5" x4¹ ₂" 5" x 5".46. lbs Fasteners: All sizes packed all machine screws and half wood screws, except ¹ ₂" x ¹ ₂" packed all wood screws, half machine screws. Please Note: Extra machine or wood screws available when needed upon request. Packing ¹ ₂" x¹ ₂" 50 Pr Per Case: 4" x 4" 4¹ ₂" x4" 4¹ ₂" x4¹ ₂" 0 Pr. 5" x 4" 5" x4¹ ₂" 5" x 5" 4 Pr. Per Box: All sizes packed Hinges (¹ ₂ pr.) per box except ¹ ₂" x ¹ ₂" packed Hinges ( pr.) per box. other Commercial finishes also available, such as US4 - Polished Nickel and US5 - Satin Nickel. QUANTITY DISCOUNTS CASE LoTS 5% } CASE LoTS 7¹ ₂% CAN BE 5 CASE LoTS 0% ASSoRTED 0 CASE LoTS 0-0% ADD FoR LESS THAN CASE LoTS 0% LARGE QUANTITY BUYERS APPLY FOR EXTRA DISCOUNTS LOWER AVAILABLE USP US6D US8 US4 US0 US0B US US6 USP US6D US8 US4 US0 US0B US US6 USP US6D US8 US4 US0 US0B US US6 USP-NRP US-WPC-NRP US6D-NRP US8-NRP US4-NRP US0-NRP -NRP US0B-NRP US-NRP US6-NRP Steel Ball Bearing Hinges ¹ ₂ x¹ ₂ 4x4 4¹ ₂ x4¹ ₂ or 4¹ ₂ x4 WITH NRP FEATURE 4¹ ₂ x 4¹ ₂ 4¹ ₂ x 4 USP US6D US8 US4 US0 US0B US US6 Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome White Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome 5x5 5x4¹ ₂ 5x4 Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome D NPC D-
4 WRoUGHT STEEL STANDARD WEIGHT TRIMLINE FULL MoRTISE PLAIN BEARING TEMPLATE HINGES All hinges are WROUGHT STEEL, Plain Bearing, Full Mortise with loose, non-rising flat button tip pins. SPECIFICATIoNS Hinges: All hinges are WROUGHT STEEL, plain bearing, full mortise, with loose flat button tip pins Metal: All hinges are WROUGHT STEEL Template: All hinges conform with standard USA Templates Federal Specs: FF-H 6C, ANSI A56. (NRP): Non-Rising Pin Feature: TA-90 ALL HINGES ALSo AvAILABLE WITH NRP FEATURE. SAME AS STANLEy AND HAGER. NRP WHERE NoT SHoWN ADD 50 EACH. Round Corner Please note that most finishes in sizes 4"x 4", ¹ ₄ - Hinges: 4¹ ₂"x 4", 4¹ ₂"x 4¹ ₂" also available with ¹ ₄ RC. Prices for RC same as regular hinges. Gauge: (Hinge Thickness) Approx. Weight Per Pair GAUGE WEIGHT ¹ ₂" x¹ ₂"..4 lbs 4" x 4".0.8 lbs 4¹ ₂" x4" 4¹ ₂" x4¹ ₂".4. lbs 5" x 4" 5" x4¹ ₂" 5" x 5".46. lbs Fasteners: All sizes packed all machine screws and half wood screws, except ¹ ₂" x ¹ ₂" packed all wood screws, half machine screws. Please Note: Extra machine or wood screws available when needed upon request. Packing ¹ ₂" x¹ ₂" 50 Pr Per Case: 4" x 4" 4¹ ₂" x4" 4¹ ₂" x4¹ ₂" 0 Pr. 5" x 4" 5" x4¹ ₂" 5" x 5" 4 Pr. Per Box: All sizes packed Hinges (¹ ₂ pr.) per box except ¹ ₂" x ¹ ₂" packed Hinges ( pr.) per box. other Commercial finishes also available, such as US4 - Polished Nickel and US5 - Satin Nickel. QUANTITY DISCOUNTS CASE LoTS 5% } CASE LoTS 7¹ ₂% CAN BE 5 CASE LoTS 0% ASSoRTED 0 CASE LoTS 0-0% ADD FoR LESS THAN CASE LoTS 0% LARGE QUANTITY BUYERS APPLY FOR EXTRA DISCOUNTS LOWER AVAILABLE Prices Substantially Reduced! USP US6D US8 US4 US0 US0B US US6 USP US6D US8 US4 US0 US0B US US6 USP US6D US8 US4 US0 US0B US US6 USP-NRP US-WPC-NRP US6D-NRP US8-NRP US4-NRP US0-NRP -NRP US0B-NRP US-NRP US6-NRP Steel Plain Bearing Hinges ¹ ₂ x¹ ₂ 4x4 4¹ ₂ x4¹ ₂ or 4¹ ₂ x4 WITH NRP FEATURE 4¹ ₂ x 4¹ ₂ 4¹ ₂ x 4 USP US6D US8 US4 US0 US0B US US6 Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome White Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome 5x5 5x4¹ ₂ 5x4 Satin Aluminum Satin Bronze Highly Polished Brass Highly Polished Chrome D- NPC
5 SS-TBB79 Prices Substantially Reduced! All hinges are all 8-8 Non-Corrosive, Non-Magnetic, STAINLESS STEEL, Ball Bearing, Full Mortise, with loose non-rising flat button tip pins and all solid stainless steel fasteners. Federal Specs: FF-H 6C, ANSI A56. Template: Conforms with USA standards Gauge: Standard Gauge on all sizes Fasteners: Packed all machine screws, half wood screws. QUANTITY DISCOUNTS STAINLESS STEEL STANDARD WEIGHT TRIMLINE FULL MoRTISE BALL BEARING TEMPLATE HINGES CASE LoTS 5% CASE LoTS 7¹ ₂% 5 CASE LoTS 0% 0 CASE LoTS 0-0% ADD FoR LESS THAN CASE LoTS 0% LARGE QUANTITY BUYERS APPLY FOR EXTRA DISCOUNTS LOWER AVAILABLE } CAN BE ASSoRTED SIZE x 4 x 4 4 x 4 4 x 4 5 x 4 5 x 5 4 x 4 4 x 4 4 x 4 SIZE 4 x 4 4 x 4 4 x 4 4 x 4 USD USD USD USD USD USD USD USD SS-TBB79 TyPE CoRNER SQUARE SQUARE SQUARE PACKED CASE BoX 50Pr SS-TBB79 NRP TyPE CoRNER PACKED BoX CASE ALL HINGES ALSo AvAILABLE WITH NRP FEATURE. SAME AS STANLEy AND HAGER. NRP WHERE NoT SHoWN ADD EACH. 0Pr D STAINLESS STEEL STANDARD WEIGHT TRIMLINE FULL MoRTISE PLAIN BEARING TEMPLATE HINGES SS-TA90 All hinges are all 8-8 Non-Corrosive, Non-Magnetic, STAINLESS STEEL, Plain Bearing, Full Mortise, with loose non-rising flat button tip pins and all solid stainless steel fasteners. Federal Specs: FF-H 6C, ANSI A56. Template: Conforms with USA standards Gauge: Standard Gauge on all sizes SIZE x x 4 x 4 4 x 4 4 x 4 5 x 4 5 x 5 4 x 4 4 x 4 4 x 4 USD USD USD USD USD USD USD SS-TA90 TyPE CoRNER SQUARE SQUARE SQUARE SQUARE PACKED BoX CASE 50Pr Fasteners: QUANTITY DISCOUNTS Packed all machine screws, half wood screws. CASE LoTS 5% CASE LoTS 7¹ ₂% 5 CASE LoTS 0% 0 CASE LoTS 0-0% ADD FoR LESS THAN CASE LoTS 0% LARGE QUANTITY BUYERS APPLY FOR EXTRA DISCOUNTS LOWER AVAILABLE } CAN BE ASSoRTED SIZE 4 x 4 4 x 4 4 x 4 5 x 4 5 x 5 4 x 4 4 x 4 4 x 4 USD USD USD USD USD SS-TA90 NRP TyPE CoRNER SQUARE SQUARE PACKED BoX CASE 0Pr NPC D-
6 HEAvy WEIGHT TRIMLINE FULL MoRTISE BALL BEARING TEMPLATE HINGES Prices Substantially Reduced! All prices include NRP feature at no extra charge T-BB68 NRP All hinges are WRoUGHT STEEL, Ball Bearing, Full Mortise with loose non-rising flat button tip pins. T-SS-BB99 NRP All hinges are 8-8 Non-Magnetic, Non-Corrosive, STAINLESS STEEL, Ball Bearing, Full Mortise, with loose Stainless Steel non-rising flat button tip pins and all solid stainless steel fasteners. SPECIFICATIoNS Hinges: All hinges are HEAVY WEIGHT with 4 ball bearings Metal: T-BB68 NRP: WROUGHT STEEL T-SS-BB99 NRP: 8-8 all non-magnetic, non-corrosive STAINLESS STEEL Template: All hinges conform with standard USA Templates Federal Specs: FF-H 6C, ANSI A56. (NRP): Non-Rising Pin Feature: Gauges: ALL HINGES SUPPLIED AT NO EXTRA COST WITH NRP FEATURE INCLUDED IN (Hinge Thickness) Approx. Weight Per Pair GAUGE WEIGHT 4¹ ₂" x4" 4¹ ₂" x4¹ ₂" lbs 5" x4¹ ₂" 5" x 5".90.5 lbs Packing: PER BoX PER CASE 4¹ ₂" x4" 4¹ ₂" x4¹ ₂" (¹ ₂ PR.) 4Pr. 5" x4¹ ₂" 5" x 5" (¹ ₂ PR.) 4Pr. Fasteners: All sizes packed all machine screws and half wood screws Wrought Steel Ball Bearing Hinges 4¹ ₂ x4¹ ₂ or 4¹ ₂ x4 USP-NRP US6D-NRP US4-NRP US0-NRP US0B-NRP US-NRP US6-NRP USP-NRP US6D-NRP US4-NRP US0-NRP US0B-NRP US-NRP US6-NRP Satin Bronze Highly Polished Brass Highly Polished Chrome $ $ Stainless Steel Ball Bearing Hinges 4¹ ₂ x4¹ ₂ or 4¹ ₂ x4 PER PAIR EACH USD-NRP Satin Stainless Steel $ 9.70 $ x4¹ ₂ or 5x5 Satin Bronze Highly Polished Brass Highly Polished Chrome 5x4¹ ₂ or 5x5 $ PER PAIR $ EACH USD-NRP Satin Stainless Steel $ 8.50 $ 9.5 QUANTITY DISCOUNTS CASE 5% CASES 7¹ ₂% CASES 0% 5 CASES 0-5% 0 CASES 0-0% CAN BE ASSoRTED PLEASE NoTE: We can supply all sizes and finishes in Heavy Weight Plain or Ball Bearing Hinges in Wrought Steel, Solid Brass, Stainless Steel with only a short delay. Apply for Prices and any other information needed. D-4 NPC
7 EXTRUDED SoLID BRASS BALL BEARING HINGES NoN-TEMPLATE TyPE PLATES SIZE SB-BB 00 PB GAUGE THICKNESS PAIRS PER MASTER CASE PRICE PER PAIR For standard full mortise application Packed with all wood screws Heavy Gauge Construction X Polished Brass.090" 50 ¹ ₂ X ¹ ₂ Polished Brass.06" 50 4 X 4 Polished Brass.5" 5 4¹ ₂ X 4¹ ₂ Polished Brass.5" 5 5 X 5 Polished Brass.5" 0 An economy priced solid brass ball bearing hinge Prices are lower than most wrought steel plated commercial grade hinges - ideal for use on solid core wood doors. D Quantity Discounts Full Case Lots -- Less 5% 00 Pr. Lots (Can be assorted) -- Less 0% 00 Pr. Lots (Can be assorted) -- Less 0-5% TRIMLINE-FULL MoRTISE SoLID BRASS TEMPLATE PLAIN BEARING HINGES SIMILAR STANLEy 9 ANSI A56 98 SIZE GAUGE ITEM No. PR. CASE WEIGHT LBS/PR. x.09 SB-90PB 50.0 ¹ ₂ x ¹ ₂. Polished Brass x ¹ ₂ x ¹ ₂ x 4¹ ₂ x PER PR. LESS CASE LoTS PER PR. IN CASE LoTS Meets Federal Spec. #FF-H-6C TA-SB 90 Solid Brass Template Hinges Full mortise, Loose pin, Button tip, individually boxed per pair with fasteners. x.09 SB-90CMD 50.0 ¹ ₂ x ¹ ₂ x ¹ ₂ x ¹ ₂ x 4¹ ₂ x ) Inner case packing: Fiber containers cross steel strapped. 50 pr. x, ¹ ₂ x ¹ ₂ 0 pr. 4 x 4, 4¹ ₂ x 4, 4¹ ₂ x 4¹ ₂ 0 pr. 5 x 5 ) All templates conform to Standard USA Templates. ) All hinges full gauge and meet federal specification. 4) All hinges finely finished with a durable transparent lacquer to protect lasting ability of finish. 5) x, ¹ ₂ x ¹ ₂ boxed with all wood screws & ¹ ₂ machine screws. 6) 4 x 4, 4¹ ₂ x 4, 4¹ ₂ x 4¹ ₂, 5 x 5 boxed with all machine screws & ¹ ₂ wood screws. NoTE: Packed ¹ ₂ pr. per box except " x ", ¹ ₂" x ¹ ₂ and 5" x 5" Quantity Discounts 5 Case Lots less 5% 0 Case Lots less 0% 5 Case Lots Apply (Can be assorted) NPC D-5
8 FULL SURFACE HALF SURFACE HALF MORTISE PLAIN & BALL BEARING TRIMLINE TEMPLATE HINGES FEDERAL SPEC. # FF-H-6C ANSI A56. BB7 FULL SURFACE BALL BEARING HINGES Template, Steel, Button Tip, individually boxed per pair. Packed with screws and grommet nuts. DESCRIPTIoN Full Surface, Steel Ball Bearing Hinges (Similar Stanley FBB 7) ITEM No./ BB7 PC BB7 PC-NRP BB7 PC BB7 PC-NRP SIZE 4¹ ₂ 4¹ ₂ 5 5 GAUGE WEIGHT lbs./pr PACKED BoX CASE 0Pr BB7 HALF SURFACE BALL BEARING HINGES Template, Steel, Button Tip, individually boxed per pair with wood & machine screws and thru bolts & nuts. DESCRIPTIoN Half Surface, Steel Ball Bearing Hinges, Template (Similar Stanley FBB 7) ITEM No./ BB7 PC BB7 PC-NRP BB7-US4 BB7-US6D BB7 PC BB7 PC-NRP SIZE 4¹ ₂ 4¹ ₂ 4¹ ₂ 4¹ ₂ 5 5 GAUGE WEIGHT lbs./pr PACKED BoX CASE 0Pr TA7 HALF SURFACE PLAIN BEARING HINGES Template, Steel, Button Tip, individually boxed per pair with wood & machine screws and thru bolts & nuts. DESCRIPTIoN Half Surface, Steel Plain Bearing Hinges. Template (Similar Stanley F7) ITEM No./ TA7 PC TA7 PC-NRP TA7 US4 SIZE 4¹ ₂ 4¹ ₂ 4¹ ₂ GAUGE WEIGHT lbs./pr PACKED BoX CASE 0Pr. 0 0 BB77 HALF MoRTISE BALL BEARING HINGES Template, Steel, Button Tip, boxed per pair with wood & machine screws. DESCRIPTIoN Half Mortise, Steel BB Butts, Template (Similar Stanley FBB 77) ITEM No./ BB77 PC BB77 PC-NRP SIZE 4¹ ₂ 4¹ ₂ GAUGE.4.4 WEIGHT lbs./pr..5.5 PACKED 0Pr. 0 BoX CASE TA77 HALF MoRTISE PLAIN BEARING HINGES Template, Steel, Button Tip, boxed per pair with wood & machine screws. DESCRIPTIoN Half Mortise, Steel Hinges, Template (Similar Stanley F77) ITEM No./ TA77 PC TA77 PC-NRP SIZE 4¹ ₂ 4¹ ₂ GAUGE.4.4 WEIGHT lbs./pr..5.5 PACKED 0Pr. 0 BoX CASE QUANTITY DISCOUNTS } CAN CASES 5% CASES 7¹ ₂% 5 CASES 0% 0 CASES 0-0% ADD 0% FoR LESS THAN CASE LoTS BE ASSoRTED GROMMET NUT ONLY FOR ZINC PLATED ¹ ₄-0 THRU BOLT & GROMMET NUT BULK PACKED TACO : $ EA. ZINC PLATED THRU BoLT & GRoMMET NUT FoR TEMPLATE BUTTS ¹ ₄-0 x " bulk packed Price $ with hinges $ if purchased separately PLEASE NoTE: Also available upon request, other sizes and finishes with only a short delivery delay. D-6 NPC
9 SINGLE ACTING UL 79 TRIMLINE SPRING HINGES 4¹ ₂ x4¹ ₂ or 4¹ ₂ x 4 FULL GAUGE Federal Specs: ANSI/BMHA Template: All templates conform with standard USA Templates Application: Ideal for apartment and condominium corridor doors, office doors and closet storage and service room doors or wherever self-closing doors are required. Perfect for use on all types of commercial metal and wood doors including labeled fire doors. Adjustable Spring Tension: Positive easily adjustable, wide range of power adjustments. Spring tension can be increased or decreased during or after installation. Requires only one person to adjust. Non-handed: Reversible for right or left hand application. Performance: Looks and performs like a premium concealed bearing spring acting hinge. Template: Identically same template as regular plain or ball bearing full mortise hinges. Can be used on doors combined with regular hinges. Construction and Finishes: Available in 6 popular finishes. Anti-friction bearings takes both vertical and lateral loads. Time proven coil spring design. Strong fool-proof construction as easy to install and adjust as old style spring hinges. Size 4¹ ₂ X 4¹ ₂ 4¹ ₂ X 4¹ ₂ 4 X 4 4 X 4 SPECIFICATION GUIDELINES Door Size and Weight For doors up to 70 lbs. not exceeding x 7 x ³ ₄ For doors up to 60 lbs. not exceeding x 7 x ³ ₄ For doors up to 5 lbs. not exceeding x 7 x ³ ₄ For doors up to 60 lbs. not exceeding 4 x 8 x ³ ₄ For doors up to 75 lbs. not exceeding x 7 x ³ ₄ For doors up to 55 lbs. not exceeding x 7 x ³ ₄ For doors up to 05 lbs. not exceeding x 7 x ³ ₄ Number of Spring Hinges Required One each No. UL 79, with each antifriction bearing hinges of the same size. Three each No. UL 79. Two each No. UL 79, with each antifriction bearing hinges of the same size. Four each No. UL 79. Two each No. UL 79 or UL-RC79, with each BB79 type of the same size. One each No. UL 79 or UL-RC79, with each BB79 type of the same size. Three each No. UL 79 or UL-RC79. PLEASE NoTE: ALSo AvAILABLE UPoN REqUEST WE CAN SUPPLy ANy other TEMPLATE Packed one hinge per box with all machine screws and ¹ ₂ wood screws. Complete with wrench, adjusting pin and directions. other commercial finishes also available, such as US4 - Polished nickel and US5 - Satin Nickel USP US6D US8 US4 US0 US0B US US6 USD Satin Aluminum Satin Bronze Polished Brass Polished Chrome Satin Stainless Steel GAUGE PACKED BoX CASE ea. * Note: USD is solid stainless steel. It is non-magnetic, non-corrosive type with all solid stainless steel fasteners. SQ - USP SQ - US8 ¹ ₄ RC - US8 SQ - US4 ¹ ₄ RC - US4 SQ - ¹ ₄ RC - SQ - US6D ¹ ₄ RC - US6D SQ - US ¹ ₄ RC - US ¹ ₄ - ⁵ ₈ - USP ¹ ₄ - ⁵ ₈ - US6D ¹ ₄ - ⁵ ₈ - US4 ¹ ₄ - ⁵ ₈ - US0A ¹ ₄ - ⁵ ₈ - US5A ¹ ₄ - ⁵ ₈ - US ¹ ₄ - ⁵ ₈ - US6 4x4 Square or ¹ ₄ RC FULL GAUGE Satin Aluminum Satin Aluminum Polished Brass Polished Brass ea. ¹ ₂ x ¹ ₂ Sq or ¹ ₄ RC or ⁵ ₈ RC LIGHT.0" GA. ¹ ₄ RC - USP ¹ ₄ RC - US6D ¹ ₄ RC - US0A ¹ ₄ RC - US0B ¹ ₄ RC - US5 ¹ ₄ RC - US4 ¹ ₄ RC - US ¹ ₄ RC - US6 ⁵ ₈ RC - USP ⁵ ₈ RC - US4 ⁵ ₈ RC - US ⁵ ₈ RC - US6 ⁵ ₈ RC - US6D ⁵ ₈ RC - US0B ⁵ ₈ RC - US5 SQ - USP SQ - US4 SQ - US6D SQ - US5 SQ - US0B SQ - US SQ - US6 4x4 ¹ ₄ or ⁵ ₈ RC LIGHT.0" GAUGE Antique Bronze Antique Nickel Polished Brass Polished Chrome Antique Bronze Satin Nickel Polished Brass Polished Chrome Polished Brass Polished Chrome Satin Nickel Satin Nickel Polished Brass Polished Chrome ea. ea. PRICE EACH CASE LoTS 5% } CASE LoTS 7¹ ₂% CAN 5 CASE LoTS 0% 0 CASE LoTS 0-0% ADD FoR LESS THAN CASE LoTS 0% LARGE QUANTITY BUYERS APPLY FOR EXTRA DISCOUNTS LOWER AVAILABLE QUANTITY DISCOUNTS BE ASSoRTED D NPC D-7
10 SINGLE ACTING TEMPLATE SPRING HINGES HALF SURFACE AND FULL MoRTISE ANSI A FULL MoRTISE TyPE FULL MoRTISE TyPE TA5500PC Approved by NYC Housing SIZES 6" 7" TA5579PC SIZE 6" x 4¹ ₂" Wrought Steel Finish Template Modern Button Tips Packed with all Machine Screws -- ¹ ₂ Wood Screws Complete with Tension Adjuster and Instructions Useable on both Metal or Wood Doors Boxed per Pair Pair per Master Carton Wrought Steel Finish Template Modern Button Tips Packed with all Machine Screws -- ¹ ₂ Wood Screws Complete with Tension Adjuster and Instructions Useable on both Metal or Wood Doors Boxed per Pair Pair per Master Carton PRICE PER PAIR PRICE PER PAIR Quantity Discounts PAIR LOTS - LESS 5% 60 PAIR LOTS - LESS 7¹ ₂% 0 PAIR LOTS - LESS 0% 60 PAIR LOTS - APPLY Quantity Discounts PAIR LOTS - LESS 5% 60 PAIR LOTS - LESS 7¹ ₂% 0 PAIR LOTS - LESS 0% 60 PAIR LOTS - APPLY HALF SURFACE TyPE HALF SURFACE TyPE TA5555PC SIZE 6" x4¹ ₂" FLANGE SIZE 6" x 6" FLANGE Wrought Steel Finish Template Modern Button Tips Packed with 8 Thru Bolts and Grommet Nuts and 8 Machine Screws Complete with Tension Adjuster and Instructions For all Types of Doors Where Half Surface Application Needed, Includes Plastic and Kalamein Doors, etc. Boxed per Pair Pair per Master Carton PRICE PER PAIR (EITHER SIZE) TA5555PC SIZE 7" x 7" FLANGE Wrought Steel Finish Template Modern Button Tips Packed with 8 Thru Bolts and Grommet Nuts and 8 Machine Screws Complete with Tension Adjuster and Instructions For all Types of Doors Where Half Surface Application Needed, Includes Plastic and Kalamein Doors, etc. Boxed per Pair Pair per Master Carton PRICE PER PAIR Quantity Discounts PAIR LOTS - LESS 5% 60 PAIR LOTS - LESS 7¹ ₂% 0 PAIR LOTS - LESS 0% 60 PAIR LOTS - APPLY Quantity Discounts PAIR LOTS - LESS 5% 60 PAIR LOTS - LESS 7¹ ₂% 0 PAIR LOTS - LESS 0% 60 PAIR LOTS - APPLY D-8 NPC
11 SPRING ACTION HINGES DoUBLE ACTIoN SPRING HINGES (ANSI A56. 98) LESS THAN FULL CARToN LoTS ADD 0% DESCRIPTIoN TACo No. SIZE LB./PAIR PAIRS PER CASE PRICE PER PAIR TA-N5000 DOUBLE ACTION SPRING HINGES WITHOUT HANGING STRIP Steel with modern tips. Packed with screws of same finish, tension adjuster and full instructions. TA-N5000BK (Dead Black) TA-N5000PC () ".50 5 Pr. ".00 5 Pr. 4".75 0 Pr. 5" Pr. 6" Pr. ALL SIZES AvAILABLE IN BK AND PC D TA-N5000 DOUBLE ACTION SPRING HINGES WITHOUT HANGING STRIP Steel with modern tips. Packed with screws of same finish, tension adjuster and full instructions. REPLACEMENT SPRINGS FOR DOUBLE ACTION HINGES TA-N5000PB (Polished Brass) TA-N5000BGV (Brushed Zinc) ".50 5 Pr. ".00 0 Pr. 4".75 5 Pr. 5" Pr. 6" Pr. " 4" 5" 6" ALL SIZES AvAILABLE IN PB AND BGv FoR SIZE USE MINIMUM THICK MAXIMUM THICK MAXIMUM WIDE MINIMUM WIDE " ¹ ₂" ³ ₄" ' ' 0" " ³ ₄" " '" ' 4" ⁷ ₈" ¹ ₄" '4" ' " 5" ¹ ₈" ¹ ₂" '6" ' " 6" ¹ ₄" ³ ₄" '8" ' 4" QUANTITY DISCOUNTS CASE LoT 0% DISCoUNT 5 CASE LoTS 0-5% DISCoUNT 0 CASE LoTS 0-0% DISCoUNT LESS THAN FULL CASE LOTS ADD 0% SINGLE ACTIoN SPRING HINGES LESS THAN FULL CARToN LoTS ADD 0% DESCRIPTIoN TACo No. SIZE LB./PAIR TA-5500 SINGLE ACTION SPRING HINGES. Single action. Steel with modern button tips. Packed with screws, tension adjuster and full instructions. TA-5500PC () TA-5500PB (Polished Brass) PAIRS PER CASE ".5 50 Pr. 4" Pr. ".5 50 Pr. 4" Pr. PRICE PER PAIR See page I-8 for other modern style SA Spring Hinges TA-5500 (6" Leaf) SINGLE ACTION SPRING HINGES Steel template type with modern tips. Packed with ¹ ₂ wood screws, ¹ ₂ machine screws, tension adjuster, instructions for mounting. TA-5500PC () 6" 4.5 Pr. TA-5579 (4¹ ₂" Leaf) SINGLE ACTION SPRING HINGES Template, with 4¹ ₂" X 4¹ ₂" template hinge leaves. Boxed per pair with fasteners and instructions. TA-5579PC () 6" x 4¹ ₂" 4.5 Pr. TA-UL-5579 SINGLE ACTION SPRING HINGES Template Hinge with 4¹ ₂" leaves. U.L. approved Boxed per pair with all machine and ¹ ₂ wood screws and mounting instructions. TA-UL5579PC () 6" x 4¹ ₂" 5.00 Pr. 6" x 4¹ ₂" 4.5 Pr. 5" x ¹ ₂" 4.50 Pr. QUANTITY DISCOUNTS TA5500PC AND PB " AND 4" LESS 5% IN 00 PR. LoTS OTHER SIZES SHOW NET NPC D-9
12 NoN TEMPLATE LooSE PIN FULL MORTISE DOOR BUTTS For Residential & Light Commercial Use E-00 BUTToN TIP - Sq. CoRNER E-RC00 - ⁵ ₈ RC BUTToN TIP - ⁵ ₈ RoUND CoRNER Similar: Stanley #74 BXD PER PAIR/ PHILLIPS HEAD SCREWS Similar: Stanley #758 BXD PER PAIR/ PHILLIPS HEAD SCREWS E-00F BRASS PLATED SIZE PR/CTN TACO PRICE x 50 ¹ ₂" x ¹ ₂" 50 4 x 4 5 E-00SS SILvER SPRAyED SIZE PR/CTN TACO PRICE x 50 ¹ ₂" x ¹ ₂" 50 4 x 4 5 E-RC 00F BRASS PLATED SIZE PR/CTN TACO PRICE ¹ ₂" x ¹ ₂" 50 4 x 4 5 Available upon request: Bulk packed assembled or unassembled. E-RC 00SS SILvER SPRAyED SIZE PR/CTN TACO PRICE ¹ ₂" x ¹ ₂" 50 4 x 4 5 Available upon request: Bulk packed assembled or unassembled. DOOR HINGES Residential Weight Full Mortise Loose Pin STAINLESS STEEL 8-8 Non Magnetic Non-Corrosive SS-TA00-USD Series For use with all types of Residential and Light Commercial Doors where a non-corrosive hinge is needed, such as in a salt air climate or other caustic exposure. " x " ¹ ₂" x ¹ ₂" 4" x 4" pr/box 50 pr/carton Packed with ³ ₄" #9 Flat Phillips Head Wood Screws pr/box 50 pr/carton Packed with ³ ₄" #9 Flat Phillips Head Wood Screws pr/box 50 pr/carton Packed with " #9 Flat Phillips Head Wood Screws Price PER PAIR Price PER PAIR Price PER PAIR Quantity Discounts D-0 5 Case Lots 5% Discount 0 Case Lots 0% Discount NPC
13 DOOR HINGES DECoRAToR quality RESIDENTIAL WEIGHT HIGHLy HAND PoLISHED MIRRoR-LIKE BRASS D The ultimate US- PoLISHED BRASS finish on the market. As highly polished and mirror-like as more expensive solid brass hinges. MoDEL No. & DESCRIPTIoN SIZE PACKED PER BoX PER CASE PRICE PER PAIR RC758-HPB with ⁵ ₈" radius round corners ¹ ₂" x ¹ ₂" 4 x 4 pair pair 50 pair 5 pair TA74-HPB with square corners ¹ ₂" x ¹ ₂" 4 x 4 pair pair 50 pair 5 pair WE GUARANTEE you THAT These hinges are not equaled by USA made US- polished brass residential grade steel hinges. Quantity Discounts CASE LOTS LESS 5% DISCOUNT 5 CASE LOTS LESS 0% DISCOUNT NPC D-
14 FULL MoRTISE LooSE PIN LIGHT WEIGHT TEMPLATE HINGES LW-RC79 SERIES FoR USE WITH ALL BRANDS of PRE - ED, ADJUST - A - FRAME TyPE, HoLLoW, STEEL FRAMES, USED WITH EITHER STEEL or WooD DooRS. ¹ ₂" x ¹ ₂" 4" x 4" ¹ ₄" radius round corners ³ ₈" Doors require ¹ ₂" X ¹ ₂" size ³ ₄" Doors require 4" X 4" size ¹ ₄" radius round corners THESE TEMPLATE HINGES ARE ESPECIALLy MADE FoR USE WITH PRE-ED, HoLLoW, STEEL DooR FRAMES LIKE REDIFRAME, TIMELy, RoLLFoRM AND KEWANEE-ADJUST-A-FRAME. this p disco SIZES PACKED BoX CASE LoTS GAUGE PRICE PER PAIR ¹ ₂" x ¹ ₂" pr ( hinges) all machined screws (¹ ₂ wood screws) * ea. ¹⁰ ₂₄" x ¹ ₂" F.H. Phillips machine screws 6 ea. ³ ₄" #0. Phillips fully threaded sheet metal screws 50 pr ALU SATIN ALUMINUM.097" DURo NODIC.097" US4 SATIN BRASS.097" US6D SATIN CHROME.097" US POLISHED BRASS.097" US6 POLISHED CHROME.097" 4" x 4" ¹ ₂ pr ( hinges) all machined screws (¹ ₂ wood screws) * 6 ea. ¹⁰ ₂₄" x ¹ ₂" F.H. Phillips machine screws 8 ea. " #0 F.H. Phillips fully threaded sheet metal screws 0 bxs. (¹ ₂ pr)= 0 pr ALU SATIN ALUMINUM.097" DURo NODIC.097" US4 SATIN BRASS.097" US6D SATIN CHROME.097" US POLISHED BRASS.097" US6 POLISHED CHROME.097" Also available in other popular commercial finishes including: USP - F - Dull Brass US0B - oil Rubbed Bronze FEATURES: Material wrought steel Pins loose Handing non-handed Quantity Discounts D- 5 Case Lots less 5% 0 Case Lots less 0% (can be assorted/full cartons only) Prices are for case lots Less than case lots add 5% NPC
15 We Proudly Announce ROTON By Hager C O N T I N U O U S G E A R H I N G E S is page scontinued FULL SURFACE At Very Competitive Prices! FULL SURFACE D 780- CONCEALED LEAF CONCEALED LEAF HALF SURFACE We can also supply all other models of aluminum or stainless steel Roton Hinges upon request. NPC D-
16 ROTON By Hager CONTINUOUS GEAR HINGES Designed specifically to solve problems on existing doors and to prevent problems on new doors Roton Continuous Geared Hinges reduce stress by extending along the entire door height, eliminating any twist or sagging that can occur with traditional hinges or pivots. The door is also supported by 6 (standard duty) or (heavy duty) patented Lubriloy bearings which further reduce friction making these hinges an excellent choice for high-traffic areas. The benefits of choosing Roton Hinges: Lifetime warranty Increased security Added safety from pinched fingers Reduced sound transmission valuable energy savings Eliminates warping Asthetically pleasing appearance D-4 NPC
17 ROTON By Hager ITEM NO. LOAD SIZE- LENGTH DESCRIPTION UL780-0AL Standard 8" ALU Gear hinge - Full Surface - Swing Clear Type UL780-0DU Standard 8" Gear hinge - Full Surface - Swing Clear Type ULHD780-0AL Heavy Duty 8" ALU Gear hinge - Full Surface - Swing Clear Type ULHD780-0DU Heavy Duty 8" Gear hinge - Full Surface - Swing Clear Type ULHD780-0AL Heavy Duty 95" ALU Gear hinge - Full Surface - Swing Clear Type ULHD780-0DU Heavy Duty 95" Gear hinge - Full Surface - Swing Clear Type UL780-57AL Standard 8" ALU Gear hinge - Full Surface - Limited Frame UL780-57DU Standard 8" Gear hinge - Full Surface - Limited Frame ULHD780-57AL Heavy Duty 8" ALU Gear hinge - Full Surface - Limited Frame ULHD780-57DU Heavy Duty 8" Gear hinge - Full Surface - Limited Frame ULHD780-57AL Heavy Duty 95" ALU Gear hinge - Full Surface - Limited Frame ULHD780-57DU Heavy Duty 95" Gear hinge - Full Surface - Limited Frame UL780-4AL Standard 8" ALU Gear hinge - Concealed Leaf - ³ ₄" Door UL780-4DU Standard 8" Gear hinge - Concealed Leaf - ³ ₄" Door ULHD780-4AL Heavy Duty 8" ALU Gear hinge - Concealed Leaf - ³ ₄" Door ULHD780-4DU Heavy Duty 8" Gear hinge - Concealed Leaf - ³ ₄" Door ULHD780-4AL Heavy Duty 95" ALU Gear hinge - Concealed Leaf - ³ ₄" Door ULHD780-4DU Heavy Duty 95" Gear hinge - Concealed Leaf - ³ ₄" Door UL780-AL Standard 8" ALU Gear hinge - Concealed Leaf UL780-DU Standard 8" Gear hinge - Concealed Leaf ULHD780-AL Heavy Duty 8" ALU Gear hinge - Concealed Leaf ULHD780-DU Heavy Duty 8" Gear hinge - Concealed Leaf ULHD780-AL Heavy Duty 95" ALU Gear hinge - Concealed Leaf ULHD780-DU Heavy Duty 95" Gear hinge - Concealed Leaf UL780-05AL Standard 8" ALU Gear hinge - Half Surface Type ULHD780-05AL Heavy Duty 8" ALU Gear hinge - Half Surface Type ULHD780-05AL Heavy Duty 95" ALU Gear hinge - Half Surface Type UL780-0M-AL 95" ALU Gear hinge - Cover Only UL780-0M-DU 95" Gear hinge - Cover Only UL780-47M-AL 95" ALU Gear hinge - Cover Only UL780-47M-DU 95" Gear hinge - Cover Only UL780-05AL 95" ALU Gear hinge - Cover Only UL780-05DU 95" Gear hinge - Cover Only PRICE EACH D NoTE: PLEASE INqUIRE ABoUT ADDITIoNAL DISCoUNTS FoR LARGER quantities NPC D-5
18 ROTON By Hager FULL SURFACE HINGE HD Clearance: Fasteners: Length Options: Door Reinforcement: Frame Reinforcement: Special Features: None required for hinge side. ⁵ ₈" (4mm) minimum frame face required plus ³ ₁₆" (5mm) rotational clearance Dril-Kwick screws and sexbolts Standard and custom None required None required to 00 lbs. Use 6 gauge channel at higher weight Zero clearance required for hinge side Can be used with any door and frame material Security moldings For Doors of any Material Standard & Heavy Duty Standard duty for medium frequency doors. RoToN MoDEL No LENGTH Inches Centimeters HoLE CoUNT No. Sex Bolts No. Pan Head No. for Jamb Heavy duty for high frequency doors or heavy medium frequency doors HD 780-0HD 780-0HD 780-0HD HD opening 90 opening 80 opening D-6 NPC
19 ROTON By Hager FULL SURFACE HINGE HD Clearance: Fasteners: None required for hinge side Dril-Kwick screws and sexbolts Length Options: Standard and custom Door Reinforcement: Frame Reinforcement: None required None required to 00 lbs. Use 6 gauge channel at higher weight D Special Features: For surface applications where frame face dimensions is limited Security moldings For Doors of any Material Standard & Heavy Duty RoToN MoDEL No LENGTH Inches Centimeters HoLE CoUNT No. Sexbolts No. Pan Head Standard duty for medium frequency doors. Heavy duty for high frequency doors or heavy medium frequency doors HD HD HD HD HD opening 90 opening 80 opening NPC D-7
20 ROTON By Hager CONCEALED LEAF HINGE HD 780-4LL Clearance: Fasteners: Length Options: Door Reinforcement: Frame Reinforcement: Fire Rating: U.L. Special Features: ⁵ ₁₆" (8mm) hinge side plus standard lockside clearance Dril-Kwick screws Standard and custom None required to 00 lbs. Use 6 gauge channel at higher weight None required to 00 lbs. Use 6 gauge channel at higher weight Up to hours. Specify stud or Lead lined model for hospital x-ray room (doors with double row of screws to straddle lead. Specify LL ) For Doors of any Material Standard & Heavy Duty Standard duty for medium frequency ³ ₄" doors. Heavy duty for high frequency ³ ₄" doors or heavy medium frequency doors ³ ₄". RoToN MoDEL No HD 780-4HD 780-4HD 780-4HD 780-4HD 780-4LL 780-4LL 780-4LL 780-4LL 780-4LL LENGTH Inches Centimeters SCREW CoUNT No. for Door No. for Jamb opening 90 opening 80 opening D-8 NPC
21 ROTON By Hager CONCEALED LEAF HINGE HD 780-LL Clearance: ⁵ ₁₆" (8mm) hinge side plus standard lockside clearance Fasteners: Dril-Kwick screws Length Options: Door Reinforcement: Standard and custom screws None required to 00 lbs. Use 6 gauge channel at higher weight D Frame Reinforcement: None required to 00 lbs. Use 6 gauge channel at higher weight Fire Rating: Up to hours. Specify stud or U.L. Special Features: ribs Lead lined model for hospital x-ray room doors with double row of screws to straddle lead (Specify LL ) Frame and door leaf alignment for proper hinge and door location For Doors of any Material Standard & Heavy Duty Standard duty for medium frequency doors. Heavy duty for high frequency doors or heavy medium frequency doors. RoToN MoDEL No HD 780-HD 780-HD 780-HD 780-HD 780-LL 780-LL 780-LL 780-LL 780-LL LENGTH Inches Centimeters SCREW CoUNT No. for Door No. for Jamb opening 90 opening 80 opening NPC D-9
22 ROTON By Hager HALF SURFACE HINGE HD Clearance: Fasteners: Length Options: Door Reinforcement: Frame Reinforcement: ⁵ ₃₂" (4mm) frame leaf clearance (¹ ₈" (mm) minimum) plus standard lockside clearance Dril-Kwick screws and sexbolts Standard and custom None required None required to 00 lbs. Use 6 gauge channel at higher weight For Doors of any Material Standard & Heavy Duty RoToN MoDEL No LENGTH Inches Centimeters HoLE CoUNT No. Sex Bolts No. Pan Head No. for Jamb Standard duty for medium frequency ³ ₄" (45mm) or ³ ₈" (5mm) doors. Heavy duty for high frequency doors or heavy medium frequency doors HD HD HD HD HD opening 90 opening 80 opening D-0 NPC
23 METAL FRAME SILENCERS Soft spongy rubber In a gray color to match most metal door frames Easy-to-install The classic type of metal frame silencer Packed 000 per heavy poly bag 0,000 per master carton D MoDEL No. DS-G 000 LoTS 5000 LoTS 0,000 LoTS 0,000 LoTS NRP NON-REMOVABLE HINGE PIN FEATURE We can supply any TACo contract hinge with NRP feature. Add $.50 per pair when you order any non-stock hinge with NRP feature. HEAvy DUTy BALL BEARING TyPE DoUBLE-ACTING FLooR SPRING HINGE WITH 90 HoLD open FEATURE opens INWARD & outward TA77-PB TA77-DN TA77-AB The ball-bearing carries the weight of the door and absorbs the spring thrust. Hold-open mechanism at the position of 90, inward and outward. Special oil-tempered coil spring, with a great resilience and power. The screw-holes in the floor plate serve for proper alignment of the door. Doors from ¹ ₈" up to ³ ₈" Available PB - US=Polished Brass DN - US5=Satin Nickel AB - US5=Antique Brass Packed: 5/Case, with Fasteners & Installation Instructions Price: Quantity Discounts 5% Discounts in 50 Lots 0% Discount in 00 Lots NPC D-
24 AUToMATIC HINGE PIN DOOR CLOSER CD-SDC E-Z To INSTALL - No TooLS NEEDED INSTALL IN MINUTES BY REPLACING THE EXISTING HINGE PIN ON MOST DOOR HINGES. Fits hinges ¹ ₂" x ¹ ₂" & 4" x 4" sizes Use on doors up to 60 lbs. Use on doors over 60 lbs. Spring tension is adjustable with wrench supplied with each closer. PACKING Individually blister packed on display card 0 per unit ctn. 0/master ctn. CRoSS REFERENCE HAGAR No. CD4 PRICE EACH quantity DISCoUNT 0 LOTS 5% 40 LOTS 0% EXTRA HEAvy DUTy ADJUSTABLE COIL SPRING DOOR CLOSER For use on Commercial Residential Doors Screen-Storm Doors Gates Other Uses: For ornamental gates, gardens, patios, swimming pools, etc. FEATURES: Adjustable spring tension. Spring made of best tempered steel wire in proper gauge to permit required tension adjustment. Reversible for use either right or left hand. Dead lock finished assembly is zinc plated before final finishing for durability. Packed with mounting instructions and screws. Similar to: Stanley #CDT95 Bommer #40-40 Quantity Discounts D- 50 Units less 5% 00 Units less 0% Can be assorted NPC MoDELS SIZE TyPE PACKED PACKED PRICE No. PER UNIT MASTER EACH BoX CARToN CD-XBK " Ex Hvy Duty 5 5 CD-XBK " Ex Hvy Duty 5 5 DS-08BK 8" Standard Duty 5 5 DS-09BK 9" Standard Duty 5 5 DS-XBK " Ex Hvy Duty 5 5 DS-XBK " Ex Hvy Duty 5 5 AN ADJUSTABLE DooR CLoSING DEvICE WHICH ELIMINATES USE of EXPENSIvE DooR CLoSERS
25 EXPANDED ASSORTMENT SEX BoLTS THRU BoLTS GRoMMET NUTS THRU BoLTS & GRoMMET NUTS FOR TEMPLATE HINGES ¹ ₄-0 x " BULK PACKED PRICE: SEX BoLT CoMPLETE ZINC PLATED ZINC PLATED NUT only NUT ONLY FOR ZINC PLATED ¹ ₄-0 BULK PACKED PRICE: FOR DOOR CLOSERS OR PANIC DEVICES & OTHER HARDWARE Complete Sex Bolts for use with Door Closers with ¹ ₄" - 0 Machine Screws NoW AvAILABLE IN THE FoLLoWING ES: Finish Aluminum Gold Bronze Polished Brass Polished Chrome Price quantity BUyERS APPLy FoR DISCoUNTS AvAILABLE PLEASE NOTE Price with Door Closer ANyoNE INTERESTED IN ANy SIZE or of SEX BoLTS or THRU BoLTS & GRoMMET NUTS SHoULD FoRWARD US THEIR INqUIRIES FoR PRICE quotes D NPC D-
26 We Also Carry A Wide Assortment of Popular Door Hardware AT GREAT! Door Knockers & Viewers Door Stops & Wall Bumpers Flush Bolts Door Holders Letter Slots Chain House Numbers Door Guards Push Plates & Pulls Heavy Duty Thresholds Architectural Wire Pulls and more! D-4 See Section G For More Information NPC
H4545 SERIES. 4-1/2 x 4-1/2 Square Corner Hinges. How To Order H4545 Series. Standard Features. Optional Features FINISH SIZE MODEL PIN OPTION
H4545 SERIES 4-1/2 x 4-1/2 Square Corner Hinges US26D / Chrome USP / Prime Coat US3 / Polished Brass / Stainless Steel n Performance Complies with ANSI A156.1, 1999 (plain bearing and ball bearing) n Performance
More informationHinges / Continuous. Hager Continuous Hinges/Pivots. Hager Roton Replacement Moldings
Roton Replacement Moldings s/pivots 780-210M Replacement door leaf molding for 780-210 (HD), 780-211 (HD), 780-213 (HD), 80-045 (HD), 780-046 (HD). Furnished with Allen Head set screws and wrench. Shipped
More informationMcKINNEY Hinge Catalog Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible)
Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible) T2774 or furnished in : on hinge side specify T4774) 4 1 2 114.3.134 All 5K plain bearing standard weight half mortise
More informationProduct Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-33-5625 2 Table of Contents Full Mortise Hinges, Standard Weight... Full Mortise Hinges, Heavy Weight... 8 Half Mortise Hinges, Standard Weight... 8 Full Mortise
More informationIntroduction. BAHCO g Boston Architectural Hinge Company. Dear Customer,
g Introduction Dear Customer, Welcome to. BAHCO is a manufacturer and distributor of architectural grade hinges in the greater Boston area. At BAHCO we have a motivated team of people who are driven by
More informationMANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
More informationHINGES SPECIFICATIONS. Hinge Chart - General Specifications
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
More informationAluminum Continuous Geared Hinges
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
More informationStainless Steel Continuous Hinges
Stainless Steel Continuous Hinges Why Continuous? Hager Companies heavy duty stainless steel continuous hinges are designed and engineered to evenly distribute door weight along the full length of the
More informationBUILDERS HARDWARE Catalog Number 134 July 2010
BUILDERS HARDWARE Catalog Number 134 July 2010 Bommer Industries, Inc. P.O. Box 187 19810 Asheville Highway Landrum, South Carolina 29356 www.bommer.com Phone : 864-457 - 3301 Phone : 800-334 - 1654 Fax
More informationMounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
More informationTrim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
More informationBB1068 / BB1099 SERIES
068 / 099 SRIS LL RING TMPLT UTT HINGS HVY WIGHT Non-handed ase material: steel for series 068, stainless steel for series 099 High grade plated finishes Standard non-rising non-removable pin (NRP) Standard
More informationGRADE 1 & GRADE 2 HINGES
GRADE 1 & GRADE 2 HINGES Division 8 10 YEAR WARRANTY BHMA/ANSI A156.1 GRADE 1 & 2 SPECIFICATION UNISON HARDWARE, INC. www.inoxproducts.com Version: 2015.10 TABLE OF CONTENTS How to Order Page 1 HG8112/HG5112
More informationArchitectural Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 84-86 Emergency Stop Release... 15 D Detention Food Pass Through Hinge... 36 Detention Hinge (IHT)... 24, 32, 35 Detention
More informationBUILDERS HARDWARE Catalog Number 134 July 2010
BUILDERS HARDWARE Catalog Number 134 July 2010 Bommer Industries, Inc. P.O. Box 187 19810 Asheville Highway Landrum, South Carolina 29356 www.bommer.com Phone : 864-457 - 3301 Phone : 800-334 - 1654 Fax
More informationLifetime Warranty on Commercial Grade Hinges
Lifetime Warranty on Commercial Grade Hinges BHMA CERTIFIED CAL-ROYAL Hinges are VALUE and a clear advantage to you. At CAL-ROYAL we strive for quality and excellence with service being our number one
More informationCommercial Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 75-77 Emergency Stop Release... 14 F Fasteners...9-10 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)...
More informationArchitectural Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 85-87 Emergency Stop Release... 14 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)... 20, 27, 30 Detention
More informationWARRAntY & HInGE types
McKinney Warranty McKinney products are guaranteed to be free of defects in both workmanship and materials for a period of one year. Any bending, defacing or modification of our product after leaving the
More informationHINGES SPECIFICATIONS
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
More informationStainless Steel Continuous Hinges
TABLE OF CONTENTS A ANSI Standards...2 C Cancellation Notification... 2 Concealed Electric Through-Wire... 4-5 Custom Hole Pattern... 2 Custom Length Hinges... 2 D Dutch Door Hinges... 3 E Electrical Modifications
More informationFine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
More informationMcKINNEY Builder s Hardware Catalog #4
McKINNEY Builder s Hardware Catalog #4 McKINNEY is comprised of a world class team of highly skilled people focused on exceeding customer needs through innovation and flexibility in the manufacture of
More informationIves - Residential 07 WINDOW LOCKS 2 ELBOW CATCH 25 SCREEN DOOR PULL 026 BAR WINDOW LIFT
07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-AMERICAN BUILDING
More informationAllen & Allen Company
Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two
More information4 1/2" x 4 1/2" x 3/16" Thick Stainless Steel, Investment Cast Full Mortise, Hospital Tip
NW 645FM STAINLESS STEEL HINGE Material: Stainless Steel, Investment Cast Pin: Stainless Steel, Concealed & Non-Removable Bearings: Anti-Friction Bearings, Maintenance-Free Capacity: 300lb Door (3 Hinges)!"
More informationArchitectural Hardware
Architectural Hardware Surface Closers Precision Architectural Closers are designed for heavy duty commercial use. With an adjustable power tension, these closers can handle the lightest ADA Compliant
More informationMcKINNEY Hinge Catalog Hinge Types
Hinge Types McKINNEY offers the broadest range of full mortise hinges in a variety of metals, finishes, sizes, and weights to meet all your load bearing and security applications. They include two, three,
More informationDOORS, HINGES, PIVOTS
Section Table of Contents DOORS,, PIVOTS SECTION 3 D Door Frames... 94 Doors... 94 Door Sweeps... 96 H Hinges... 95 100 N P Hinge Pins... 99 NSP Pivots... 100 Pivots... 100 Vendors ABH... 95 Adams Rite...
More informationFire Rating 3 hours- hollow metal doors mounted singly 90 minutes- hollow metal and composite core wood fire doors 20 minutes- wood doors
FM-300 Edge Mount 260 Santa Fe Street, Pomona, CA 91767 800-872-3267 909-632-2300 800-232-6752 fax www.markar.com Heavy-duty 14 Gauge stainless steel US32D Satin Stainless Steel (630) Grade 1 4'0" maximum
More informationContents. The undisputed leader in door accessory hardware /ING BuyLine 2600
08 71 00/ING BuyLine 2600 STEELCRAFT The undisputed leader in door accessory hardware. For more than 120 years Ives has produced a full line of top quality building hardware that delivers the utmost application
More informationHookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
More informationDeltana-Bolts 6FBS Series
4FBS Series 4 Flush Bolt Square Corner DIMENSIONS: 4 x3/4 x 1/8 CORNER: SQUARE CASE QTY: 200 PC Deltana-Bolts 6FBS Series 6 Flush Bolt Square Corner DIMENSIONS: 6 x3/4 x 1/8 CORNER: SQUARE BOX QTY: 5 PC
More informationCheckmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
More informationContinuous Geared Hinges
Standard Lengths Cal-Royal continuous hinge length provides for actual threshold clearance, head clearance and door height allowances for carpeting. Other lengths may be ordered as non-standard items.
More informationbaldwin 5" High, Solid Brass Solid Brass
Tel (45) 552-5500 www.macpac.com DOOR KNOCKERS BALDWIN door knockers BALDWIN HOUSE NUMBERS 5" High, baldwin COLONIAL 6.5" x 3.5" C/C of bolts: 4" Available w/observ-o-scope* 002-003 Lifetime Pol. Brass
More informationIves - Residential #07 WINDOW LOCKS #2 ELBOW CATCH #25 SCREEN DOOR PULL #026 BAR WINDOW LIFT
#07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-American Building
More informationArchitectural Door & Cabinet Door
Architectural Door & Cabinet Door A1 TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
More informationYour global resource for quality commercial door hardware. Euroline Catalog Euroline Catalog
Your global resource for quality commercial door hardware. Catalog Catalog More for your door than any other brand. TM Industry-Leading Service For more than 158 years, Hager Companies has led the industry
More informationcontinuous GEARED HingeS
continuous GEARED HingeS Numerical Index: Fasteners: HD1100... CH2 HD1400... CH4 HD1800... CH3 HD2100... CH9 HD2400... CH5 HD2700... CH6 HD4100... CH7 HD4200... CH12 HD5300... CH10 HD5400... CH11 HD5700...
More informationDoor Closers. General Information
General Information Hager Companies offers a variety of surface door closers to meet a wide range of applications and uses. Heavy Duty, Grade 1 door closers are ideal for schools, hospitals, and other
More informationRoton Continuous Geared Hinges
Roton Continuous Geared Hinges You design and build structures that need to withstand the realities of daily use. Hager s engineers and product development team understand how building entrances and exits
More informationDOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
More informationThis section describes the design requirements and materials/products for door hardware.
Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran
More information300 Series Pin & Barrel Type Continuous Stainless Steel Hinges
www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door
More informations tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
More informationMEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
More informationFloor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
More informationArchitectural Hinges. General Information
DETERMINE TYPE OF HINGE What is the door material (wood, stainless steel, fiberglass, or hollow metal)? What is the frame material (wood, stainless steel, channel iron, or hollow metal)? Hinges are manufactured
More informationDoor & Window Accessories Phone Ordering:
Flush Pulls- Low profile for sliding, bi-fold and pocket doors. Heavy Duty Pull Size 1 5 16" x 3 1 8" x 7 16" Two piece construction Includes screws. Oblong Pull Size 3 9 16" x 1 5 16" x 1 2" Contoured
More information2010 Condensed Catalog
2010 Condensed Catalog INDUSTRY-LEADING SERVICE The Hager products on the following pages are known and used the world over because of their legendary quality and practical value. But for 160 years, Hager
More informationFEATURES. TownSteel Architectural Hardware MFG
TownSteel Architectural Hardware MFG TownSteel Inc. Quick Ship Guide Quick Ship Products on the road to you within 48 hours of receipt of purchase order and upon approval of credit. Terms and conditions
More informationMasonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
More informationOFFSET PIVOTS STOREFRONT HARDWARE
Trans-Atlantic offset pivots are used for both flush face frame installations and ⅛" recessed door applciations. Pivots replace most major door manufacturers. Suitable for aluminum doors weighing up to
More informationPivots / Padlocks / Hasps
/ Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,
More informationPro-Builder s & Millwork
Pro-Builder s & Millwork 324A Half Acre Road, Cranbury, NJ 08512 Phone: 800.695.4827 Fax: 609.860.9991 www.worldandmain.com CATALOG Ultra Hardware has been supporting the Builder s market for over 30 years
More informationArchitectural Door & Cabinet Hardware
Architectural Door & Cabinet Hardware TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
More informationSECTION FINISH HARDWARE
SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings
More informationDOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More informationPivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors
Pivot and Pivot Sets Architectural Solutions for Durable and Efficient Hanging of Doors TABLE OF CONTENTS General Information... 4 How to Select Product... 5 Options... 6 Certifications... 6 Limited Warranty...
More informationWorld s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form
World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:
More information800 SERIES. Heavy-Duty Commercial Grade 1 Surface Applied Closers. Standard Features. 3 hours fire rated. openings of the door.
800 SERIES Heavy-Duty Commercial Grade 1 Surface Applied Closers Standard Features n Performance Complies with ANSI A156.4, Grade 1, 2 million cycles, UL/ULC listed up to 3 hours fire rated n Chassis/Closer
More informationGeneral Hinge Information
, ontinuous Hinges and Pivots A2 Latches, atches & olts xterior Hardware A2 eneral Hinge Information SLTION O TH PROPR WIHT AN ARIN TYP Standard Weight... Plain earing Standard Weight... all earing, oncealed
More information400 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Overhead Holders. Closer-Holder Packages
Checkmate and Stops General Information Overhead stops are used to protect door assemblies.they cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism. By limiting
More informationNX7 SERIES 5-1/2 HANDRAIL
STORAGE & HANDLING The handrails are shipped unassembled. Upon receipt, immediately check all material for any damage that may have occurred in transit and verify that all of the items and quantities are
More informationFINISH HARDWARE. UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302)
FINISH HARDWARE UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302)831-2935 PART 1 GENERAL 1.01 GENERAL PROVISIONS A. The drawings and General Provisions of the contract, including the
More informationFITTINGS, SCREWS, BOLTS, ETC.
5mm Connecting 3 Mending Plate Order number... 19-116 For 5/8 to 5/8...19-168 For 3/4 to 3/4...19-170 Packaged 5 pieces Finish: Bright Nickel Packaged 5 pieces Finish: Zinc Plated Connecting Bracket For
More informationSolid Core Wood Door / Steel Frame Packages
Solid Core Wood Door / Steel Frame Packages No Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations 1-3/4 Solid Core Birch 1-3/4 Solid Core Oak 3/0
More informationLIST PRICING. Standard Door Modifications
Standard Modifications 6/8 Slab Only (No Jamb) *deduct from standard door unit price - $120 7/0 and 8/0 Slab Only (No Jamb) *deduct from standard door unit price -$160 Sidelite Panel Only (No Jamb) *deduct
More informationArchitectural Door Accessories. Markar Continuous Hinges
Architectural Door Accessories Why Continuous Hinges? Hinge failure most commonly begins when doors are opened beyond stop device limits. The resulting kickback shock to the hinges can surpass 1000 lbs.
More informationProduct Catalog hardwaresuppliers.com
Product Catalog 800.334.5625 hardwaresuppliers.com 800-334-5625 www.hardwaresuppliers.com 2 Finishes Key to Base Materials & Processing IVES Material Symbol Material Process A Aluminum Burnished MA, PA
More informationANSI/BHMA A Revision of ANSI/BHMA A
ANSI/BHMA A156.26-2012 Revision of ANSI/BHMA A156.26-2006 AMERICAN NATIONAL STANDARD FOR CONTINUOUS HINGES SPONSOR BUILDERS HARDWARE MANUFACTURERS ASSOCIATION, INC. Revision B 2/15/2017 Formatted: Centered
More informationGENERAL HINGE: INFORMATION. General Hinge. Information. Trusted experts. Proven reliability. Simply STANLEY.
GENERAL HINGE: INFORMATION General Hinge Information Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS Factors determining proper hinge selection...2 Application...3 Hinge height...4
More informationArchitectural Hinges > Full Mortise Hinges > ECCO
Plain Bearing - Standard Weight EC1100 For use on medium weight doors or doors requiring low freqency service. - ANSI A8133 - Five knuckle - Non-rising removable pin with button tip and plug - With door
More informationOptions & Shop Services for Entry Units
Table of Contents: Exposure Protection... OPT-1 & OPT-10 Handing...OPT-1 HOW TO DETERMINE HANDING When the door opens toward you and the knob is on the left hand side, it is a LEFT HAND DOOR. When the
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationNX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationWeatherfold 4s 50, 75 & 100
Codes Weatherfold 4s 50, 75 & 100 Brio Australia P: +61 2 87186718 W: brio.com.au E: sales@brio.com.au Brio RMD UK Ltd. P: +44 191 2291224 W: briouk.com E: sales@briouk.com INSTBWS1 REV D - NOV 2011 Brio
More informationTable of Contents Holders & Stops
Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,
More informationWeatherfold 4s 50 & 100 Brio Australia P: W: brio.com.au
Codes INSTBWS2 REV J - MAR 2017 Weatherfold 4s 50 & 100 Brio Australia P: +61 2 87186718 W: brio.com.au E: brio.sales@allegion.com Brio UK P: +44 191 2291224 W: briouk.com E: brio.sales.uk@allegion.com
More informationInstallation Instructions. Installation Type
Installation Instructions 300 & 3050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
More informationPre-Hanging Information
Pre-Hanging Information Difference between Door Slab and Pre-hung Door Door Slab Only Door Slab Only No handle preparation. No deadbolt preparation. No frame or hinges included. Pre-hung door Door unit
More informationWNA Series. Knobsets AVAILABLE STYLES AVAILABLE FINISHES. Finish A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA Code
WNA Series Knobsets AVAILABLE STYLES Beverly Huntington Phoenix Troy AVAILABLE FINISHES Are in Brilliance finish in certain funtions Finish 3 5 15 17A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA
More informationWindowAndDoorParts.US
Knob/Push Pull Latch Sets Tulip Knob Latch, Single Hole 17-52 Aluminum Installs in single hole bore 1-1/4" diameter. Tulip Knob Latch 17-59 17-60 Aluminum Tulip Knob Latch "No Lock Out" Feature 17-61 Aluminum
More informationSenior Swing. Caution
*740132* 740132 2800 Overhead Concealed Series 9500 Surface Applied Series Senior Swing Installation Instructions Caution LCN Senior Swing The Senior Swing Power Operator System is a low energy product
More informationCOPPER / FIBER MANAGER RACK INSTALLATION INSTRUCTIONS PX Standard Release A March 2008
COPPER / FIBER MANAGER RACK INSTALLATION INSTRUCTIONS PX101425 Standard Release A March 2008 A UPON RECEIPT OF YOUR Copper / Fiber Manager Rack Great care has been taken to insure that your Copper / Fiber
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationTable of Contents Holders & Stops
Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590
More informationInstallation Instructions. Installation Type
Installation Instructions 800 & 8050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
More informationDoor Controls. Table of Contents
Door Controls Hager Companies offers a comprehensive line of door control products designed and manufactured to meet a wide range of applications and uses. From humble beginnings in 1849 as a forger of
More informationHEARNE STEEL CO., INC.
HEARNE STEEL CO., INC. INDUSTRIAL PARK 1011 VAUGHN LANE HEARNE, TEXAS 77859 Leading Manufacturers Of Chain Link Fence Fittings J.C. AMOS, (1921-2008) OFFICE ADDRESS: R.W. AMOS, President P. O. BOX 1239
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationHinge not swaged figure 1. Hinge not swaged figure 2. Hinge swaged (standard) figure 3. Hinge swaged (standard) figure 4 16 "
MAYFLOWER SALES COMPANY, INC. General General Architectural Hinge The hinges are one of the most active components of an opening combined with the lock, exit device, and closers. Hardware in general is
More informationMX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationSection J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10
Section J-2: Glides and Levelers Section J-2: Last Updated: 07/02/10 Maverick Hardware Section J-2: Light Duty Glides Adjustable Suggested applications: residential, RTA furniture, and store fixtures.
More informationInstallation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
More informationMortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
More information