STAINLESS STEEL CONTINUOUS HINGES
|
|
|
- Alyson Alexander
- 6 years ago
- Views:
Transcription
1 STAINLESS STEEL ONTINUO HINGES ID stainless steel hinges are full height piano hinges that provide support for the full height of the door. For doors up to 600 lbs. 0 maximum door width Hinge leafs are Ga., 0 stainless steel Pin is / diameter 0 stainless steel, barrel. diameter Knuckles are long with Delrin TM bearings between each Hinges Nominal Sizes 7 (/ ), (9 ) & 0 (/ ) are nonhanded. 6 (7/ ) & 7 ( ) are handed Special lengths available Standard finishd All dimensions in ( ) are actual hinge lenghts. IDA00 For / doors Heavyduty Gauge 0 Stainless Steel D Satin Stainless Steel 0 Maximum door width IDA0 oncealed For / doors HeavyDuty Gauge 0 Stainless Steel D Satin Stainless Steel 0 Maximum door width Door edge lip on both faces of door Protects door edge Adjustable to accommodate slight variances in door thickness For specialty door Use with AS or AB EDGE MOUNT ONEALED EDGE GUARD International Door losers, Inc. OPYRIGHT 07 INTERNATIONAL DOOR LOSERS, IN 7 MIN. LEARANE Selfdrilling screws standard, security screws available (wood or machine) Fire RatingUL and UL fire Listed hourshollow metal door 90 min.hollow metal and composite core wood fire door 0 min.wood door ustom utouts available 6 IDA00 Full oncealed Edge Mount IDA0 Full oncealed Edge Guard West: 00 East: 00677
2 IDA SWING LEAR WITH EDGE GUARD oncealed Flush mount For / doors HeavyDuty Gauge 0 Stainless Steel D Satin Stainless Steel Door edge lip on stop side only 0 Maximum door width Meets ADA requirements IDA WITH EDGE GUARD MIN. LEARANE 6 IDA Full oncealed Swing lear With Edge Guard oncealed F or square edged doors For / doors HeavyDuty Gauge 0 Stainless Steel D Satin Stainless Steel Door edge lip on stop side only 0 Maximum door width 7 MIN. LEARANE 6 IDA Full oncealed With Edge Guard HALF SURFAE IDA0 For / doors HeavyDuty Gauge 0 Stainless Steel D Satin Stainless Steel 0 Maximum door width urrent transfer prep available (frame leaf only) SURFAE MOUNTED DOOR LEAF IDA0 Half Surface MIN. LEARANE International Door losers, Inc. OPYRIGHT 07 INTERNATIONAL DOOR LOSERS, IN 6 West: 00 East: 00677
3 IDA0 SURFAE MOUNTED FRAME LEAF For / doors HeavyDuty Gauge 0 Stainless Steel D Satin Stainless Steel 0 Maximum door width urrent transfer prep available (door leaf only) 7/6 6 MIN. LEARANE / IDA0 Surface Mounted IDA06 WITH EDGE GUARD For / doors HeavyDuty Gauge 0 Stainless Steel D Satin Stainless Steel 0 Maximum door width Door edge lip on stop side Protects door edge urrent transfer prep available (door leaf only) 7/6 6 MIN. LEARANE 6 IDA06 Half Surface With Edge Guard FULL SURFAE IDA0 For / doors HeavyDuty Gauge 0 Stainless Steel D Satin Stainless Steel 0 Maximum door width Decorative Fastener overs FULL SURFAE/FLH MOUNT 6 6 7/6 IDA0 Full Surface Flush Mount MIN. LEARANE International Door losers, Inc. OPYRIGHT 07 INTERNATIONAL DOOR LOSERS, IN 7 West: 00 East: 00677
4 PIN AND BARREL ONTINUO HINGES IDA00 GAUGE STAINLESS STEEL Full Mortise Edge Mount Used on hightraffic, highabuse doors HeavyDuty Gauge 0 Stainless Steel D Satin Stainless Steel No exposed Fasteners when door is closed Supplied with x/ Phillips Undercut Flat Head Machine Screw S.S. Supports door weights up to 900 lbs. 0 Maximum door width Nominal Sizes 7, & 0 are nonhanded 6 & 7 are handed hinges / diameter stainless steel pin STAINLESS STEEL POWER TRANSFER HINGES ONEALED THRU WIRE ONTINUO HINGE MODIFIATIONS Special LengthsIndicate Handing Hospital TipSuffix HT For all full concealed models (except A) TW () ga. wire location TW () ga. wire location TW () ga. wire () wire locations For all full concealed models add suffix TW, TW or TW all factory or go online for order form Dutch Door PrepSuffix DD, indicate handing, clearances, door and frame heights BlankNo holes for special applications MOVEABLE ut to allow access for TW, T, ES and AMS wiring between hinge and frame or door For all full concealed models (except A) Add suffix M Standard Edge Guard utout 7/ ASA Strike 6 Latch 6 Mortise Manual Flush Bolt Automatic Flush Bolt Security StudSuffix SS, stainless steel studs mounted to frame leaf. orresponding holes drilled in door leaf. Special prep required for frame and. door Sheared LeafSuffix SL for narrow door thickness. Specify distance from pin centerline to heel edge of hinge. ustom Hole PatternSuffix H, any hole dimension or pattern other than ID standard. Indicate hole size and dimensions. ELETRIAL MODIFIATIONS oncealed Power TansferSuffix TW, TW or TW Power Transfer ontact Switch uffix T or T, for 6 amp surge current, / 0 screws posts to accommodate any gauge wire, no wire furnished. LeadLined oversuffix LL for surface mount only. urrent Transfer PrepSuffix PT, indicate position and handing Electric Power TransferPT0 (. ) or PT0 (0.0 ). Does not include hinge, hinge power transfer prep or Security bracket (PTS). Exposed Monitoring SwitchSuffix ES available in A00, A0, A0, A0 & A. Adjustable Monitoring SwitchSuffix AMS. ontact factory or go online for order forms for electrical modifications or standard/custom cutouts. International Door losers, Inc. OPYRIGHT 07 INTERNATIONAL DOOR LOSERS, IN West: 00 East: 00677
5 ROSS REFERENE HART STAINLESS STEEL HINGES STAINLESS STEEL HINGE ROSS REFERENE HART ID MARKAR HAGER STANLEY IVES IDA00 IDA0 IDA0 IDA0 IDA0 IDA06 IDA IDA IDAS IDAB IDAS IDAB IDATS IDATB FM00 FS0 HS0 HM0 HG0 HG06 HG HG EG0 EH0 EG0 EG0 EGT0 EGT HD 67HD 6HD 6HD 66HD 6HD EG EGB EG EGB EG EGB IDA0 FM International Door losers, Inc. OPYRIGHT 07 INTERNATIONAL DOOR LOSERS, IN 9 West: 00 East: 00677
CONTINUOUS HINGES ALUMINUM GEARED HINGES
ID ONTINUO GEAR HINGES ONTINUO HINGES ALUMINUM GEARED HINGES ID ontinuous Gear Hinges are all heavy duty. All hinges have double the number of bearings of standard duty hinges and are pin less. There are
Stainless Steel Continuous Hinges
TABLE OF CONTENTS A ANSI Standards...2 C Cancellation Notification... 2 Concealed Electric Through-Wire... 4-5 Custom Hole Pattern... 2 Custom Length Hinges... 2 D Dutch Door Hinges... 3 E Electrical Modifications
Aluminum Continuous Geared Hinges
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
300 Series Pin & Barrel Type Continuous Stainless Steel Hinges
www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door
Fire Rating 3 hours- hollow metal doors mounted singly 90 minutes- hollow metal and composite core wood fire doors 20 minutes- wood doors
FM-300 Edge Mount 260 Santa Fe Street, Pomona, CA 91767 800-872-3267 909-632-2300 800-232-6752 fax www.markar.com Heavy-duty 14 Gauge stainless steel US32D Satin Stainless Steel (630) Grade 1 4'0" maximum
Stainless Steel Continuous Hinges
Stainless Steel Continuous Hinges Why Continuous? Hager Companies heavy duty stainless steel continuous hinges are designed and engineered to evenly distribute door weight along the full length of the
Hinges / Continuous. Hager Continuous Hinges/Pivots. Hager Roton Replacement Moldings
Roton Replacement Moldings s/pivots 780-210M Replacement door leaf molding for 780-210 (HD), 780-211 (HD), 780-213 (HD), 80-045 (HD), 780-046 (HD). Furnished with Allen Head set screws and wrench. Shipped
Roton Continuous Geared Hinges
Roton Continuous Geared Hinges You design and build structures that need to withstand the realities of daily use. Hager s engineers and product development team understand how building entrances and exits
NEW! EX, H & X SERIES PUSH-PULL WITH HIP PADDLE OR HANDLE EXTENSION FOR MOST 6000, 6600 AND 6700 MODELS J PUSH/PULL SERIES WITH JUNIOR COVER
EX, H & X SERIES PUSH-PULL WITH HIP PADDLE OR HANDLE EXTENSION FOR MOST 6000, 6600 AND 6700 MODELS EX SERIES Patent No. 5,70,7 6,96,599 H SERIES Patent No. 5,70,7 6,96,599 X SERIES Patent No. 5,70,7 6,96,599
Continuous Geared Hinges
Standard Lengths Cal-Royal continuous hinge length provides for actual threshold clearance, head clearance and door height allowances for carpeting. Other lengths may be ordered as non-standard items.
Markar Price List Pemko Manufacturing Co.
Markar Price List 2012-2015 Pemko Manufacturing Co. Warranties...3 Terms and Conditions...4-5 Hinge Finishes...6-7 Hinge Numbering System and Standard Lengths...8-9 Continuous Hinge Modifications...10
Markar Price List Pemko Manufacturing Co.
Markar Price List 2012-2014 Pemko Manufacturing Co. Warranties...3 Terms and Conditions...4-5 Hinge Finishes...6-7 Hinge Numbering System and Standard Lengths...8-9 Continuous Hinge Modifications...10
Architectural Door Accessories. Markar Continuous Hinges
Architectural Door Accessories Why Continuous Hinges? Hinge failure most commonly begins when doors are opened beyond stop device limits. The resulting kickback shock to the hinges can surpass 1000 lbs.
continuous GEARED HingeS
continuous GEARED HingeS Numerical Index: Fasteners: HD1100... CH2 HD1400... CH4 HD1800... CH3 HD2100... CH9 HD2400... CH5 HD2700... CH6 HD4100... CH7 HD4200... CH12 HD5300... CH10 HD5400... CH11 HD5700...
McKINNEY Hinge Catalog Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible)
Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible) T2774 or furnished in : on hinge side specify T4774) 4 1 2 114.3.134 All 5K plain bearing standard weight half mortise
What Is a Continuous Geared Aluminum Hinge
What Is a Continuous Geared Aluminum Hinge Unlike a conventional hinge, a Continuous Geared Aluminum Hinge has no pin. Also it is not like a piano hinge either, which has 50% of each knuckle cut awa, and
Price List #10 Effective February 6, 2017 Supercedes all previous price lists
Price List #10 Effective February 6, 2017 Supercedes all previous price lists Table of Contents TARGET 1 Quick Ship... 3 Overhead Holders & Stops... 4-6 Hospital Push/Pull Latches... 7-10 Electromagnetic
MEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
Price List #9. Effective May 1, 2013 Supercedes all previous price lists. Table of Contents
Price List #9 Effective May 1, 2013 Supercedes all previous price lists Table of Contents Target-1 Quick Ship... 3 Overhead ers & s... 4-6 Hospital Push/Pull Latches... 7-9 Electro-Magnetic ers... 10 Electrical
4 1/2" x 4 1/2" x 3/16" Thick Stainless Steel, Investment Cast Full Mortise, Hospital Tip
NW 645FM STAINLESS STEEL HINGE Material: Stainless Steel, Investment Cast Pin: Stainless Steel, Concealed & Non-Removable Bearings: Anti-Friction Bearings, Maintenance-Free Capacity: 300lb Door (3 Hinges)!"
Continuous Hinges NEW! Pricing Guide. Aluminum Geared Stainless Steel Pin & Barrel. Effective August 11, 2008
Pricing Guide Effective August 11, 2008 Replaces January 14, 2008 pricing guide. List prices subject to change without notice. Pin & Barrel PRICE REDUCTION! Effective 9/15/08 See pages 10-11 Continuous
Electrical Power Transfer Products
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
Ives - Residential 07 WINDOW LOCKS 2 ELBOW CATCH 25 SCREEN DOOR PULL 026 BAR WINDOW LIFT
07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-AMERICAN BUILDING
GE Monogram 36" Built-In All-Freezer
SETION 1 FLUSH INSET INSTLLTION SETION 2 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS OVERLL IMENSIONS FLUSH INSET INSTLLTION 38" (96.5) 25 7/8" (65.7) 20 5/8" (52.4) 10 5/16" (26.2) *8 (212.1) *73
Encore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
HINGES SPECIFICATIONS. Hinge Chart - General Specifications
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
This section describes the design requirements and materials/products for door hardware.
Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran
2010 Condensed Catalog
2010 Condensed Catalog INDUSTRY-LEADING SERVICE The Hager products on the following pages are known and used the world over because of their legendary quality and practical value. But for 160 years, Hager
DOORS, HINGES, PIVOTS
Section Table of Contents DOORS,, PIVOTS SECTION 3 D Door Frames... 94 Doors... 94 Door Sweeps... 96 H Hinges... 95 100 N P Hinge Pins... 99 NSP Pivots... 100 Pivots... 100 Vendors ABH... 95 Adams Rite...
Ives - Residential #07 WINDOW LOCKS #2 ELBOW CATCH #25 SCREEN DOOR PULL #026 BAR WINDOW LIFT
#07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-American Building
Architectural Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 85-87 Emergency Stop Release... 14 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)... 20, 27, 30 Detention
Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
Commercial Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 75-77 Emergency Stop Release... 14 F Fasteners...9-10 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)...
Surface Bolts, Latches & Catches
Surface olts, Latches & atches Table Of ontents Surface olts page S360 Surface olt..................................................d2 S453 Surface olt..................................................d2
Trim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
Installation Instructions. 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC & UL-10C
Installation Instructions 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC 7-2-1997 & UL-10C Door Requirements: Consult the door manufacturer to make sure that the doors are qualified
HINGES SPECIFICATIONS
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index ROLLER
BUILDERS HARDWARE Catalog Number 134 July 2010
BUILDERS HARDWARE Catalog Number 134 July 2010 Bommer Industries, Inc. P.O. Box 187 19810 Asheville Highway Landrum, South Carolina 29356 www.bommer.com Phone : 864-457 - 3301 Phone : 800-334 - 1654 Fax
Door Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612
Door Reinforcers Application Part No. Finish Overall Size Back Set Door Thickness For Cylindrical Door Locks with 2 1 8 2-PB-CW 605 hole, 9 height. 9 2 3 8 1 3 2-S-CW 630 3-BZ-CW 612 3-PB-CW 605 1 9 2
Product Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-33-5625 2 Table of Contents Full Mortise Hinges, Standard Weight... Full Mortise Hinges, Heavy Weight... 8 Half Mortise Hinges, Standard Weight... 8 Full Mortise
BUILDERS HARDWARE Catalog Number 134 July 2010
BUILDERS HARDWARE Catalog Number 134 July 2010 Bommer Industries, Inc. P.O. Box 187 19810 Asheville Highway Landrum, South Carolina 29356 www.bommer.com Phone : 864-457 - 3301 Phone : 800-334 - 1654 Fax
SECTION FINISH HARDWARE
SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
` FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
Metal Sound Retardant Door Hardware Information Bulletin
574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Metal Sound Retardant Door Hardware Information Bulletin
DOOR REINFORCERS. For Cylindrical Door Locks with 2 1 / 8" hole, 9" height. 3-PB-CW /4" 9" 2 3 /4" 1 3 /8" S-CW
Published list prices, please login or contact a sales representative for your pricing. DON-JO Price Book, September 1, 2012 DOOR REINFORCERS Application Part No. Finish Overall Size Back Set Door Thickness
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
WARRAntY & HInGE types
McKinney Warranty McKinney products are guaranteed to be free of defects in both workmanship and materials for a period of one year. Any bending, defacing or modification of our product after leaving the
ED5200(A) Series Rim Exit Devices
ED5200() Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 08/11 For Metal, omposite and Wood Doors of Either Hand End lamp (3) 8-32 x 5/16" Flat Head, Undercut
Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
Installation Instructions. 45 and 60-Minute Positive Pressure Fire-Rated Veneered Door Frame UBC & UL-10C
Wood Doors Installation Instructions 45 and 60-Minute Positive Pressure Fire-Rated Veneered Door Frame UBC 7-2-1997 & UL-10C Positive Pressure Category Requirements: Category C The Maiman Company Fire
General Hinge Information
, ontinuous Hinges and Pivots A2 Latches, atches & olts xterior Hardware A2 eneral Hinge Information SLTION O TH PROPR WIHT AN ARIN TYP Standard Weight... Plain earing Standard Weight... all earing, oncealed
Architectural Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 84-86 Emergency Stop Release... 15 D Detention Food Pass Through Hinge... 36 Detention Hinge (IHT)... 24, 32, 35 Detention
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Special-Lite Restroom Partitions IMPORTANT - BEFORE YOU START... 1. Read through these installation instructions first to understand the order of work. 2. Check all components
s tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
MONOGRAM 36" BUILT-IN ALL-REFRIGERATOR
MONOGRM 36" UILT-IN LL-REFRIGERTOR SETION 1 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS SETION 2 FLUSH INSET INSTLLTION MONOGRM 36" UILT-IN LL-REFRIGERTOR OVERLL IMENSIONS STNR INSTLLTION 25 1/8"
Pivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors
Pivot and Pivot Sets Architectural Solutions for Durable and Efficient Hanging of Doors TABLE OF CONTENTS General Information... 4 How to Select Product... 5 Options... 6 Certifications... 6 Limited Warranty...
Architectural hardware products
rchitectural hardware products Table of contents inish chart... iv Packaging, Handing... vi - Hinges and pivots rchitectural hinges... 2 ontinuous hinges - aluminum geared... 17 ontinuous hinges - pin
STC 46 3-Sided Paired Frame (Double Rabbet Only)
(Toll Free) Phone 866-452-1845 Fax 910-452-1848 STC 46 3-Sided Paired Frame (Double Rabbet Only) FRAME PART DIMENSIONS E E THROAT THROAT MINIMUM 3 5/16" MAXIMUM 13" D A=Jamb Depth MINIMUM 4 5/16" MAXIMUM
MONOGRAM 36" BUILT-IN ALL-REFRIGERATOR
SETION 1 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS SETION 2 INSTLLTION OVERLL IMENSIONS STNR INSTLLTION 25 1/8" (63.8) 36" (91.5) 23 7/8" (60.7) 1 7/8" (4.8) *84" (213.4) *83 1/2" (212.1) 69 5/8"
Monogram 36" Built-In Bottom-freezer Refrigerator
SETION 1 FLUSH INSET INSTLLTION SETION 2 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS OVERLL IMENSIONS FTER PNEL INSTLL FLUSH INSET INSTLLTION 38" (96.5) 26" (66.0) 20 5/8" (52.4) 11 1/2" (29.2) *
Extend the life of your high-traffic doors
08 70 00/SEL BuyLine 1982 Extend the life of your high-traffic doors Unbeatable durability guarantee page 2 U.S. State Department certification page 3 Geared continuous hinges pages 4-5 Pin & Barrel continuous
Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification
4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions
Parveneer Positive Pressure Fire Rated Frames Double rabbet with T stop for 20 minutes
Section P/J Page 1 Double rabbet with T stop for 20 minutes Smoke seals are installed in the frame, not the door Section P/J Page 2 Throated jamb with T stop for 20 minutes Smoke seals are installed in
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
Your global resource for quality commercial door hardware. Euroline Catalog Euroline Catalog
Your global resource for quality commercial door hardware. Catalog Catalog More for your door than any other brand. TM Industry-Leading Service For more than 158 years, Hager Companies has led the industry
Fine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
1530(F) Mortise Exit Devices Installation Instructions
1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal
MONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
SETION 1 SETION 2 STNR 1/4" FRME PNELS 3/4" OVERLY PNELS OVERLL IMENSIONS FTER PNEL INSTLL 38" (96.5) 26" (66.0) 20 5/8" (52.4) 11 1/2" (29.2) * 84 1/2" (214.6) *73" (185.4) * 8 (212.1) SPEIFITIONS Overall
Steel Hawk 4300 Electrified Deadlatch (elatch)
STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or
88 Series. Exit device
88 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
ANSI/BHMA A Revision of ANSI/BHMA A
ANSI/BHMA A156.26-2012 Revision of ANSI/BHMA A156.26-2006 AMERICAN NATIONAL STANDARD FOR CONTINUOUS HINGES SPONSOR BUILDERS HARDWARE MANUFACTURERS ASSOCIATION, INC. Revision B 2/15/2017 Formatted: Centered
NEW! Toilet Partition Hinges (page 14) Pin & Barrel Hinges (pages 10-13)
PRICING GUIDE Effective June 1, 2011 Replaces August 11, 2008 pricing guide. List prices subject to change without notice. Continuous Hinges Aluminum Geared Stainless Steel Pin & Barrel NEW! Toilet Partition
GRADE 1 & GRADE 2 HINGES
GRADE 1 & GRADE 2 HINGES Division 8 10 YEAR WARRANTY BHMA/ANSI A156.1 GRADE 1 & 2 SPECIFICATION UNISON HARDWARE, INC. www.inoxproducts.com Version: 2015.10 TABLE OF CONTENTS How to Order Page 1 HG8112/HG5112
Contents. The undisputed leader in door accessory hardware /ING BuyLine 2600
08 71 00/ING BuyLine 2600 STEELCRAFT The undisputed leader in door accessory hardware. For more than 120 years Ives has produced a full line of top quality building hardware that delivers the utmost application
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
ROCKFORD PROCESS CONTROL, INC.
esigners and Manufacturers of Institutional asework Hardware ROKFOR PROESS ONTROL, IN. 2020 Seventh Street Rockford, IL 61104 Phone: 815-966-2000 Fax: 815-966-2026 sales@rockfordprocess.com www.rockfordprocess.com
grab BarS and rails 800 SerieS
grab BarS and rails 800 SerieS All Bradley Grab Bars are designed for safety and security of the physically disabled. The safety clearance feature is highly recommended by Barrier-Free design experts and
MONOGRAM 36" BUILT-IN ALL-FREEZER
OVERALL DIMENSIONS 36" (91.5) 25 3/4" (65.4) 23 7/8" (60.7) 2 3/4" (7.0) *84" (213.4) *73 1/4" (186.1) *8 (212.1) 64 1/4" (163.2) SPECIFICATIONS Overall Width Overall Height Overall Depth Door Clearance
Part No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
B3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
BioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
Shetland Stalls Installation Instructions
Shetland Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 1/9/18 Before you start Kit can accommodate up to 12 wide stall front
Product Cross Reference. Manufacturing, Inc.
Manufacturing, Inc. Overhead Holders & s Hospital Push/Pull Latches ElectroMagnetic Door Holders Electrical Power Transfer Products Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel
88 Series. Exit device
88 Series Exit device Introduction Your trusted solution Our brand s reputation, respect and legacy stem from that first exit device in 1908 and they continue because of the quality of Von Duprin products
8000 SERIES SERIES HEAVY-DUTY MODELS
GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary
Exit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
Hinge not swaged figure 1. Hinge not swaged figure 2. Hinge swaged (standard) figure 3. Hinge swaged (standard) figure 4 16 "
MAYFLOWER SALES COMPANY, INC. General General Architectural Hinge The hinges are one of the most active components of an opening combined with the lock, exit device, and closers. Hardware in general is
MONOGRAM 36" BUILT-IN ALL-REFRIGERATOR
OVERALL DIMENSIONS 25 3/4" (65.4) 36" (91.5) 23 7/8" (60.7) 2 3/4" (7.0) *84" (213.4) *8 (212.1) 64 1/4" (163.2) *73 1/4" (186.1) SPECIFICATIONS Overall Width Overall Height Overall Depth Door Clearance
BB1068 / BB1099 SERIES
068 / 099 SRIS LL RING TMPLT UTT HINGS HVY WIGHT Non-handed ase material: steel for series 068, stainless steel for series 099 High grade plated finishes Standard non-rising non-removable pin (NRP) Standard
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device Installation Instructions FM532 3/11 (Single Doors or Pairs with Mullion) For Doors of Either Hand In U.S.: Corbin Russwin,
A Reference Guide. Continuous Hinge, Inventory and Service Worldwide Est End Play Design Engineering with Standard Continuous Hinges
Hinge Width Paint Clearance Knuckle Length End Play Design Engineering with Standard Continuous Hinges A Reference Guide Knuckle Dear Design Engineer or Purchasing Agent, We frequently see blueprints for
General Hinge Information
, ontinuous Hinges and Pivots A2 lush olts & oordinators Latches, atches & olts xterior Hardware A2 eneral Hinge Information SLTION O TH PROPR WIHT AN ARIN TYP Standard Weight... Plain earing Standard
Introduction Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5
88 Exit Device INDEX Introduction... 3 Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5 Fire Exit Hardware Rim device... 7 Surface mounted vertical rod device...
20 Series Exit Devices Accessories Mullions & Door Kits
20 Series Exit Devices Accessories s & Kits 980 Removable Bottom (2438mm) stock size Up to (3000mm) size 2-1/2" 1-1/2" 1-1/4" 3" 507 Adapter for Narrow Transom Bars Required when soffit is 1-1/4" to 2"
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
MONOGRAM 36" BUILT-IN ALL-FREEZER
OVERALL DIMENSIONS 36" (91.5) 23 7/8" (60.7) 2 3/4" (7.0) 25 7/8" (65.7) *84" (213.4) 30 1/2" (77.5) *8 (212.1) *73" (185.4) *32 1/4" (82.0) SPECIFICATIONS Overall Width Overall Height Overall Depth Door
1 PREPARE HEADER AND ROUGH OPENING
CONTENTS. HEADER & TRACK ASSEMBLY. END BRACKET PLAIN 3. FLOOR PLATE.. 8. 4. SPLIT STUD 6 5. CARRIER (987) 6. QUICK RELEASE PLATE (960) 7. DOOR GUIDE SET (9883) 3. 4. 7. 8. BUMPER KIT (988) 9. #8 X 3/4
Stainless Steel 95C34 Series
Stainless Steel 95C34 Series Toilet Partition Installation Manual PHONE: FAX: 866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL