Monogram 36" Built-In Bottom-freezer Refrigerator
|
|
- Felix Fowler
- 5 years ago
- Views:
Transcription
1 SETION 1 FLUSH INSET INSTLLTION SETION 2 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS
2 OVERLL IMENSIONS FTER PNEL INSTLL FLUSH INSET INSTLLTION 38" (96.5) 26" (66.0) 20 5/8" (52.4) 11 1/2" (29.2) * 84 1/2" (214.6) *73" (185.4) * 8 (212.1) SPEIFITIONS Overall Width 38" (96.5 cm) Overall Height 84 1/2" (214.6 cm) Overall epth 26" (66.0 cm) oor learance utout Width utout Height utout epth Plumbing Requirements Shipping Weight 38 3/4" (98.4 cm) 39" (99.1 cm) 85" (215.9 cm) 26 3/16" (66.5 cm) 1/4" O copper tubing or GE Smartonnect kit 640 lb (290.3 kg) *26 7/16" (67.1) FRONT VIEW *4" *4" (10.2) * Shipping height. Use leveling legs and wheels for maximum 1" height adjustment from shipping height. Nominal installation height is 84 35" (89.0) ase width (10.2) SIE VIEW ** llow 15" (38.1) min clearance for 115 door swing imensions include 3/4" custom cabinet panel TTENTION ELETRIIN: 115 volt 60Hz., 15 or 20 amp power supply is required. n individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. 38 3/4" (98.4) TOP VIEW ** llow 4" (10.2) min clearance to a wall for 90 door swing ** These refrigerators are equipped with a 2-position door stop. The factory-set 115 door swing can be adjusted to 90 if clearances to adjacent cabinets or walls is restricted. llow a 15" minimum clearance to wall for pan removal. If the 90 door stop position is used, pan access is maintained, but pan removal is restricted. imensions in parentheses are in centimeters unless otherwise noted. ctual product dimensions may vary due to manufacturing tolerances.
3 FLUSH INSET INSTLLTION 3/4" PNELS 85" (215.9) 26 3/16" (66.5) Flush inset depth 20 15/16" (53.2) epth to cleat Finished cleats W SIE VIEW NTI-TIP RKET 82" (208.3) 5 1/4" (13.3) 3/4" (1.9) Width of side cleats 85" (215.9) height to cleat Use two additional hole locations at end of brackets 3/4" TOP VIEW Finished cleats ase Trim ase oor 39" (99.1) Flush inset width 37 1/2" (95.3) Width between cleats 7" (17.8) ELE. 10" (25.4) WTER (9.0) 6" (15.2) 24 3/16" (61.4) FRONT VIEW L racket mounted into vertical wall studs centered within the cutout Ensure holes selected are centered on the studs Wall Studs 7" (17.8) 1/2" (1.3) 75 1/2" (191.8 ) From floor to bottom of electrical area FLUSH INSET INSTLLTION Mounting the junction box in this location will also allow for front accessibility through access panel. Water supply area. WRNING: The refrigerator is top heavy and must be secured to prevent the possibility of tipping forward. Failure to do so may result in death or serious injury. The information below is for cabinet design only. When installing the antitip system you must use the product installation instructions. The information below applies to all installation constructions: wall bracket, bolts and toggles will be supplied with the unit. The bolts will be used to attach bracket to wall in 4 locations. Two of the locations must penetrate the center of the wall studs. The toggles are used for stability in drywall and when metal studs are encountered. Lag bolts are used in wood studs. In installation opening, measure 82" from floor and draw a horizontal line. Locate and mark the wall studs on horizontal line. Verify at least two studs have their centerlines within the center 32.5" of installation opening to ensure 2 wall studs are penetrated. The bracket will be centered left to right in opening with bottom of bracket on the horizontal line. When unit is placed in opening, the bracket tabs will align with openings in back of the unit. The unit will be secured to the bracket using supplied L bolts. See Installation Instructions for detailed instructions. SIE VIEW INSTLLE WITH NTI-TIP RKET FRONT VIEW OF UTOUT WITH NTI-TIP RKET
4 FLUSH INSET 3/4" PNEL IMENSIONS SINGLE INSTLLTION Grille Freezer rawer 3/4" RISE OOR PNEL ROUTING 11/32" 1/4" ETIL TOP 3/4" 1/4" 9/16" PNEL IMENSIONS 38" 10 11/16" 46 9/16" 22 7/16" NOTE: Routed areas should be finished as they may be visible when assembled. ack TOP FLUSH INSET INSTLLTION Trimmed refrigerators are designed to be customized with decorative panels. Fieldinstalled 1/2" or 3/4" custom door, drawer and grille panels are required. For 3/4" raised panels, routing is required. The router depth is 1/4" all the way around the panel s backs. dditional panel width reductions are required per the diagrams shown. This will create picture frame routing allowing the panels to slide into the attached door, drawer and grille trims. Maximum total panel weight: food door panels 58 lbs. Freezer drawer panel 28 lbs. Grille panel 11 lbs oor Handles oor handles not included. ustom handles supplied by your cabinet maker may be used. ZKHPSS1: Professional tubular stainless steel handle designed to fit custom panels. Kit includes one handle 30 1/2" long. Order 2 kits from your Monogram supplier. ZKHSS2: ustom European tubular handle designed to fit custom panels. Kit includes 2 handles. oor handle is 44 3/16" and drawer handle is 33 3/16". Order ZUG2: Unified grille kit for dual installation. Maximum total panel weight - 25 lbs. ZKHT: Handle side trim for left-hand and right-hand door. For use on a custom panel when using a custom handle. ack 3/16" ETIL OTTOM ORNER VIEW SHOWING PITURE FRME ROUTING ETIL LEFT SIE ETIL RIGHT SIE ROUTER EPTH 1/4" ROUTER EPTH 1/4" 3/32" 1/4" 2-1/16" 2-1/16" LEFT SIE RIGHT SIE ack 3/4" PNEL OTTOM VIEW (FTER ROUTING) OTTOM 3/4" PNEL SIE VIEW (FTER ROUTING)
5 3/4" RISE GRILL PNEL ROUTING ETIL TOP NOTE: Routed areas should be finished as they may be visible when assembled. TOP FLUSH INSET INSTLLTION 1-11/16" 3/16" LEFT SIE ROUTER EPTH 1/4" ETIL LEFT SIE ROUTER EPTH 1/4" ROUTER EPTH 1/4" 2-1/16" 2-1/16" ack 3/4" PNEL OTTOM VIEW (FTER ROUTING) 3/4" raised rawer Routing 11/32" 1/4" ETIL TOP 3/4" 1/4" 9/16" ack ORNER VIEW SHOWING PITURE FRME ROUTING NOTE: Routed areas should be finished as they may be visible when assembled. ETIL RIGHT SIE 3/32" 1/4" RIGHT SIE ack OTTOM 3/4" PNEL SIE VIEW (FTER ROUTING) TOP Trimmed refrigerators are designed to be customized with decorative panels. Fieldinstalled 1/2" or 3/4" custom door, drawer and grille panels are required. For 3/4" raised panels, routing is required. The router depth is 1/4" all the way around the panel s backs. dditional panel width reductions are required per the diagrams shown. This will create picture frame routing allowing the panels to slide into the attached door, drawer and grille trims. Maximum total panel weight: food door panels 58 lbs. Freezer drawer panel 28 lbs. Grille panel 11 lbs oor Handles oor handles not included. ustom handles supplied by your cabinet maker may be used. ZKHPSS1: Professional tubular stainless steel handle designed to fit custom panels. Kit includes one handle 30 1/2" long. Order 2 kits from your Monogram supplier. ZKHSS2: ustom European tubular handle designed to fit custom panels. Kit includes 2 handles. oor handle is 44 3/16" and drawer handle is 33 3/16". Order ZUG2: Unified grille kit for dual installation. Maximum total panel weight - 25 lbs. ZKHT: Handle side trim for left-hand and right-hand door. For use on a custom panel when using a custom handle. ack ack 3/16" ETIL OTTOM ORNER VIEW SHOWING PITURE FRME ROUTING ETIL LEFT SIE ETIL RIGHT SIE ROUTER EPTH 1/4" ROUTER EPTH 1/4" 2 1/16" 2 1/16" LEFT SIE RIGHT SIE OTTOM ack 3/4" PNEL OTTOM VIEW (FTER ROUTING) 3/4" PNEL SIE VIEW (FTER ROUTING)
6 FLUSH INSET INSTLLTION 1/2" PNELS 85" (215.9) 26 3/16" (66.5) Flush inset depth 20 13/16" (52.9) epth to cleat Finished cleats W SIE VIEW NTI-TIP RKET 82" (208.3) 5 3/8" (13.7) 3/4" (1.9) Width of side cleats 85" (215.9) height to cleat Use two additional hole locations at end of brackets 1/2" TOP VIEW ase Finished cleats ase Trim 39" (99.1) Flush inset width 37 1/2" (95.3) Width between cleats 7" (17.8) ELE. 10" (25.4) oor 6" (15.2) 24 3/16" (61.4) FRONT VIEW L WTER (9.0) racket mounted into vertical wall studs centered within the cutout Ensure holes selected are centered on the studs Wall Studs 7" (17.8) 1/2" (1.3) 75 1/2" (191.8 ) From floor to bottom of electrical area FLUSH INSET INSTLLTION Mounting the junction box in this location will also allow for front accessibility through access panel. Water supply area. WRNING: The refrigerator is top heavy and must be secured to prevent the possibility of tipping forward. Failure to do so may result in death or serious injury. The information below is for cabinet design only. When installing the antitip system you must use the product installation instructions. The information below applies to all installation constructions: wall bracket, bolts and toggles will be supplied with the unit. The bolts will be used to attach bracket to wall in 4 locations. Two of the locations must penetrate the center of the wall studs. The toggles are used for stability in drywall and when metal studs are encountered. Lag bolts are used in wood studs. In installation opening, measure 82" from floor and draw a horizontal line. Locate and mark the wall studs on horizontal line. Verify at least two studs have their centerlines within the center 32.5" of installation opening to ensure 2 wall studs are penetrated. The bracket will be centered left to right in opening with bottom of bracket on the horizontal line. When unit is placed in opening, the bracket tabs will align with openings in back of the unit. The unit will be secured to the bracket using supplied L bolts. See Installation Instructions for detailed instructions. SIE VIEW INSTLLE WITH NTI-TIP RKET FRONT VIEW OF UTOUT WITH NTI-TIP RKET
7 FLUSH INSET 1/2" PNEL IMENSIONS Grille Freezer rawer PNEL IMENSIONS 1/4" acker 33 7/8" 8 7/8" 46 1/16" 21 7/8".10" Space 32 1/2" 7 5/8" 44 11/16" 20 1/2" 1/2" Overlay 38" 10 11/16" 46 9/16" 22 7/16" FLUSH INSET INSTLLTION The 1/2" overlay panel must be secured to a.10" spacer panel and a 1/4" thick backer panel, which slides into the trim. ssemble the panels with glue and screws: enter the spacer panel on the backer panel, left to right and top to bottom. Secure the panels with glue. Refer to the chart for locating the backer panel to the overlay panel. Secure the overlay panel to the backer panel with glue and screws. Screws must be countersunk into the backer panel Order ZUG2: Unified grille kit for dual installation. Maximum total panel weight 25 lbs. 1/2" OVERLY PNEL ROUTING IMENSIONS Grille ack oor 1/2" Overlay Hinge Side /Freezer ack 1/4" acker.10" Spacer acker with Overlay ssembly PNEL IMENSIONS 2 1/16" 2 1/16" 5/16" 3/16" Freezer 2 1/16" 2 1/16" 5/16" 3/16" Grille 2 1/16" 2 1/16" 1 11/16" 3/16" Freezer rawer
8 FLUSH INSET 3/4" PNEL imensions dual installation Freezer rawer Grille PNEL IMENSIONS E Freezer rawer E 74 1/2" 10 11/16" 46 9/16" 22 7/16" 36 7/8" FLUSH INSET 1/2" PNEL IMENSIONS UL INSTLLTION Grille FLUSH INSET INSTLLTION Trimmed refrigerators are designed to be customized with decorative panels. Fieldinstalled 1/2" or 3/4" custom door, drawer and grille panels are required. For 3/4" raised panels, routing is required. The router depth is 1/4" all the way around the panel s backs. dditional panel width reductions are required per the diagrams shown. This will create picture frame routing allowing the panels to slide into the attached door, drawer and grille trims. Maximum total panel weight: food door panels 58 lbs. Freezer drawer panel 28 lbs. Grille panel 11 lbs oor Handles oor handles not included. ustom handles supplied by your cabinet maker may be used. ZKHPSS1: Professional tubular stainless steel handle designed to fit custom panels. Kit includes one handle 30 1/2" long. Order 2 kits from your Monogram supplier. ZKHSS2: ustom European tubular handle designed to fit custom panels. Kit includes 2 handles. oor handle is 44 3/16" and drawer handle is 33 3/16". Order ZUG2: Unified grille kit for dual installation. Maximum total panel weight - 25 lbs. ZKHT: Handle side trim for left-hand and right-hand door. For use on a custom panel when using a custom handle. E The 1/2" overlay panel must be secured to a.10" spacer panel and a 1/4" thick backer panel, which slides into the trim. ssemble the panels with glue and screws: enter the spacer panel on the backer panel, left to right and top to bottom. Secure the panels with glue. Freezer rawer Freezer rawer Refer to the chart for locating the backer panel to the overlay panel. Secure the overlay panel to the backer panel with glue and screws. Screws must be countersunk into the backer panel PNEL IMENSIONS Order ZUG2: Unified grille kit for dual installation. Maximum total panel weight 25 lbs. E 1/4" acker 69 7/8" 8 7/8" 46 1/16" 21 7/8" 33 7/8".10" Space 68 1/2" 7 5/8" 44 11/16" 20 1/2" 32 1/2" 1/2" Overlay 74 1/2" 10 11/16" 46 9/16" 22 7/16" 36 7/8"
9 3/4" or 1/2" UL INSTLLTIONS FLUSH INSET INSTLLTION 4 5/16" (10.9) 75 1/2" (191.8) Finished Width 24 3/16" (61.4) 26 3/16" (66.5) Min. utout epth 85" (215.9) Finished Opening ELE. 5 1/2" ELE. 5 1/2" 9" (22.9) (13.9) 9" (22.9) (13.9) separate 115V, 60Hz, 15- or 20-amp power supply is recommended for each product. In a side-by-side installation of a left-andright-hand door swing product, 1 1/2" clearance between the units is required. Order ZUG2 custom panel unified grille kit for this installation. 75 1/2" (191.8 ) From floor to bottom of electrical area 7" (17.8) WTER (9.0) 7 1/2" (19.1) 7 1/2" (19.1) WTER (9.0) 7" (17.8) W FRONT VIEW SIE VIEW 3/4" or 1/2" UL PROUT LERNES 15" (38.1) min To wall 1 1/2" (3.8) 15" (38.1) min To wall 115 oor swing 115 oor swing
10 OVERLL IMENSIONS FTER PNEL INSTLL STNR INSTLLTION 25 1/4" (64.1) 36" (91.5) 23 7/8" (60.7) 9 7/8" (25.1) 1 7/8" (4.8) *73 1/4" (186.1) 46 1/4" (117.5) *84" (213.4) *8 (212.1) SPEIFITIONS Overall Width Overall Height Overall epth oor learance utout Width 36" (91.4 cm) 84" (213.4 cm) 25 3/8" (64.5 cm) 36 3/4" (93.4 cm) 35 1/2" (90.2 cm) utout Height /2" ( cm) utout epth Plumbing Requirements Shipping Weight 24" (61 cm) 1/4" O copper tubing or GE Smartonnect kit 640 lb (290.3 kg) *26 1/2" (67.3) FRONT VIEW 35" (89.0) ase width *24 1/8" (61.3) *26" (66.0) * Shipping height. Use leveling legs and wheels for maximum 1" height adjustment from shipping height. 35" (89.0) *3 5/8" (9.2) SIE VIEW ** llow 25" (63.5) min clearance for 130 door swing TTENTION ELETRIIN: 115 volt 60Hz., 15 or 20 amp power supply is required. n individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. 36 3/4" (93.4) TOP VIEW ** llow 4" (10.2) min clearance to a wall for 90 door swing ** These refrigerators are equipped with a 2-position door stop. The factory-set 130 door swing can be adjusted to 90 if clearances to adjacent cabinets or walls is restricted. llow a 15" minimum clearance to wall for pan removal. If the 90 door stop position is used, pan access is maintained, but pan removal is restricted. imensions in parentheses are in centimeters unless otherwise noted. ctual product dimension may vary due to manufacturing tolerances.
11 STNR INSTLLTION TOP VIEW STNR INSTLLTION 3 1/8" 24" (61) (7.93) 35 1/2" (90.2) 7/16" (1.1) 1 9/16" Trim overlap 2 5/16" (3.97) (5.874) Mounting the junction box in this location will also allow for front accessibility through access panel. Water supply area. SIE VIEW NTI-TIP RKET W 82" (208.3) *84 1/2" (214.6) *Trim will overlap additional 7/16" Use two additional hole locations at end of brackets ELE. 5" (12.7) 10" (25.4) 6" (15.24) WTER (9.0) 5" FRONT VIEW L racket mounted into vertical wall studs centered within the cutout Ensure holes selected are centered on the studs Wall Studs (12.7) 75" (190.5 ) From floor to bottom of electrical area WRNING: The refrigerator is top heavy and must be secured to prevent the possibility of tipping forward. Failure to do so may result in death or serious injury. The information below is for cabinet design only. When installing the anti-tip system you must use the product installation instructions. The information below applies to all installation constructions: wall bracket, bolts and toggles will be supplied with the unit. The bolts will be used to attach bracket to wall in 4 locations. Two of the locations must penetrate the center of the wall studs. The toggles are used for stability in drywall and when metal studs are encountered. Lag bolts are used in wood studs. In installation opening, measure 82" from floor and draw a horizontal line. Locate and mark the wall studs on horizontal line. Verify at least two studs have their centerlines within the center 32.5" of installation opening to ensure 2 wall studs are penetrated. The bracket will be centered left to right in opening with bottom of bracket on the horizontal line. When unit is placed in opening, the bracket tabs will align with openings in back of the unit. The unit will be secured to the bracket using supplied L bolts. See Installation Instructions for detailed instructions. SIE VIEW INSTLLE WITH NTI-TIP RKET FRONT VIEW OF UTOUT WITH NTI-TIP RKET
12 STNR 1/4" FRME PNEL IMENSIONS SINGLE INSTLLTION STNR INSTLLTION PNEL SSEMLY ROSS SETION Grille oor Supplied Handles Trim 1/4" Framed Trimmed refrigerators are designed to be customized with decorative panels. Field-installed custom door and grille panels are required. 1/4" Framed s: For 1/4" thick custom panels ordered from your cabinet maker. The decorative panels slide into the trim. Maximum total panel weight: food door panel 58 lbs. Freezer drawer panel 28 lbs. Grille panel 11 lbs. Freezer rawer PNEL IMENSIONS 1/4" Framed 33 7/8" 8 7/8" 46 1/16" 21 7/8" STNR 3/4" OVERLY PNEL IMENSIONS SINGLE INSTLLTION Grille Freezer rawer PNEL SSEMLY ROSS SETION oor 3/4" Overlay Supplied Handles PNEL IMENSIONS 1/4" acker 33 7/8" 8 7/8" 46 1/16" 21 7/8".10" Spacer 32 1/2" 7 5/8" 44 11/16" 20 1/2" 3/4" Overlay 34 1/8" 9" 46 5/16" 22".25" +.10" +.75" = 1.10" Total Thickness Trim 1/4" acker.10" Spacer 3/4" Overlay s: The decorative panels slide into the trim. The overlay panel must be secured to a 1/4"-thick backer panel which slides into the trim. spacer panel 0.10" thick must be placed between the overlay and backer panels. enter each panel over the other. ssemble the panels with glue and screws. Screws must be countersunk into the backer panel. NOTE: Left-to-right offset is not always equal to top-to-bottom offset. Maximum total panel weight: food door panel 58 lbs. Freezer drawer panel 28 lbs. Grille panel 11 lbs. oor Handles: The supplied handles can be adjusted to accommodate both framed or overlay panels. ustom handles of your choice, supplied by your cabinet maker, can also be installed. ZKHPSS1: Professional tubular stainless steel handle designed to fit 3/4" overlay panels. ZKHSS2: European tubular handle designed to fit 3/4" panels. Kit includes 2 handles. oor handle is 44 3/16" and drawer handle is 33 3/16".
13 USTOM SIE PNELS F 1 7/8" (4.8) 24" (61.0) 3/16" (.5) *84 *84" (213.4) *epending on installation height STNR INSTLLTION F Side panels must be used whenever the sides of the refrigerator will be exposed. The 1/4 side panels will slip into the side case trim. Secure the panels to the refrigerator with stick-on hook and loop fastener strips. Order the side panels from the cabinet manufacturer. *3" - 4" ( ) *epending on installation height 2 9/16" (6.5)
14 STNR 1/4" FRME PNEL IMENSIONS UL INSTLLTION Freezer rawer Grille E Freezer rawer PNEL IMENSIONS 1/4" Framed 69 7/8" 8 7/8" 46 1/16" 21 7/8" E 33 7/8" STNR INSTLLTION Trimmed refrigerators are designed to be customized with decorative panels. Field-installed custom door and grille panels are required. 1/4" Framed s: For 1/4" thick custom panels ordered from your cabinet maker. The decorative panels slide into the trim. Maximum total panel weight: food door panel 58 lbs. Freezer drawer panel 28 lbs. Grille panel 25 lbs. Order ZUG2: Unified grille kit for dual installation PNEL SSEMLY ROSS SETION oor Trim Supplied Handles 1/4" Framed 3/4" Overlay s: STNR 3/4" OVERLY PNEL IMENSIONS UL INSTLLTION Freezer rawer PNEL SSEMLY ROSS SETION Grille E Freezer rawer oor PNEL IMENSIONS 1/4" acker.10" Spacer 3/4" Overlay 69 7/8" 68 1/2" 70 1/8" 8 7/8" 7 5/8" 9" 46 1/16" 44 11/16" 46 5/16" 21 7/8" 20 1/2" 22" E 33 7/8" 32 1/2" 34 1/8".25" +.10" +.75" = 1.10" Total Thickness Trim 1/4" acker The decorative panels slide into the trim. The overlay panel must be secured to a 1/4"-thick backer panel which slides into the trim. spacer panel 0.10" thick must be placed between the overlay and backer panels. enter each panel over the other. ssemble the panels with glue and screws. Screws must be countersunk into the backer panel. NOTE: Left-to-right offset is not always equal to top-to-bottom offset. Maximum total panel weight: food door panel 58 lbs. Freezer drawer panel 28 lbs. Grille panel 25 lbs. Order ZUG2: Unified grille kit for dual installation oor Handles: The supplied handles can be adjusted to accommodate both framed or overlay panels. ustom handles of your choice, supplied by your cabinet maker, can also be installed. ZKHPSS1: Professional tubular stainless steel handle designed to fit 3/4" overlay panels. ZKHSS2: European tubular handle designed to fit 3/4" panels. Kit includes 2 handles. oor handle is 44 3/16" and drawer handle is 33 3/16". 3/4" Overlay.10" Spacer Supplied Handles
15 UL INSTLLTIONS STNR INSTLLTION 2 5/16" (5.9) 8 min 84 1/2" max ( ) Finished Opening 71 1/2" (181.6) Finished Width 24 3/16" (61.4) ELE. 6" ELE. 6" 10" (25.4) (15.2) 10" (25.4) (15.2) 75" (190.5 ) From floor to bottom of electrical area 24" (60.9) Min. utout epth separate 115V, 60Hz, 15- or 20-amp power supply is recommended for each product. dditional cutout width may be required when side panels are used. In a side-by-side installation of a leftand-right-hand door swing product, 1" clearance between the units is required. Order ZUG2: custom panel unified grille kit for one continuous grille panel. 5" (12.7) WTER (9.0) 5 3/4" (14.6) 5 3/4" (14.6) WTER (9.0) 5" (12.7) 10" (25.4) WTER FRONT VIEW SIE VIEW UL PROUT LERNES 25" min (63.5) To wall 1" (2.5) 25" min (63.5) To wall 130 oor swing 130 oor swing
16 FETURES N ENEFITS ustom ppearance - llows personalization with cabinet-compatible panels an custom handles Upfront Electronic ontrols with igital Readout - llows precise temperature settings and are positioned for maximum ease of use Humidity ontrolled Vegetable ompartments and Sealed Snack Pans - Help maintain freshness and help preserve foods longer djustable, Spill Proof Glass Shelves - Make it easy to customize storage to handle foods and containers of various sizes 2 Sealed eli Pans with Full-Extension Slides Six djustable oor ins - Offer added storage flexibility GE Water Filtration System - elivers clean, great tasting ice R
MONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
SETION 1 SETION 2 STNR 1/4" FRME PNELS 3/4" OVERLY PNELS OVERLL IMENSIONS FTER PNEL INSTLL 38" (96.5) 26" (66.0) 20 5/8" (52.4) 11 1/2" (29.2) * 84 1/2" (214.6) *73" (185.4) * 8 (212.1) SPEIFITIONS Overall
More informationMONOGRAM 36" BUILT-IN ALL-REFRIGERATOR
SETION 1 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS SETION 2 INSTLLTION OVERLL IMENSIONS STNR INSTLLTION 25 1/8" (63.8) 36" (91.5) 23 7/8" (60.7) 1 7/8" (4.8) *84" (213.4) *83 1/2" (212.1) 69 5/8"
More informationGE Monogram 36" Built-In All-Freezer
SETION 1 FLUSH INSET INSTLLTION SETION 2 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS OVERLL IMENSIONS FLUSH INSET INSTLLTION 38" (96.5) 25 7/8" (65.7) 20 5/8" (52.4) 10 5/16" (26.2) *8 (212.1) *73
More informationMONOGRAM 36" BUILT-IN ALL-REFRIGERATOR
MONOGRM 36" UILT-IN LL-REFRIGERTOR SETION 1 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS SETION 2 FLUSH INSET INSTLLTION MONOGRM 36" UILT-IN LL-REFRIGERTOR OVERLL IMENSIONS STNR INSTLLTION 25 1/8"
More informationGE Monogram 36" Built-In Bottom-freezer Refrigerator
SECTION 1 FLUSH INSET INSTLLTION SECTION 2 STNDRD INSTLLTION 1/4" FRMED PNELS 3/4" OVERLY PNELS OVERLL DIMENSIONS FLUSH INSET INSTLLTION 38" (96.5) 25 7/8" (65.7) 20 5/8" (52.4) 9 5/8" (24.4) * 8 (212.1)
More informationMonogram 48" Built-In Side-by-Side Refrigerator
Monogram 48" uilt-in Side-by-Side Refrigerator STION 1 FLUSH INST INSTLLTION STION 2 STNR INSTLLTION 1/4" FRM PNLS 3/4" OVRLY PNLS OVRLL IMNSIONS FTR PNL INSTLL FLUSH INST INSTLLTION 50" (127.0) 26" (66.0)
More informationMONOGRAM 36" BUILT-IN FRENCH-DOOR BOTTOM-FREEZER
MONOGRM 36" UILT-IN FRNH-OOR OTTOM-FRZR STION 1 FLUSH INST INSTLLTION STION 2 STNR INSTLLTION FRM PNLS 3/4" OVRLY PNLS MONOGRM 36" UILT-IN FRNH-OOR OTTOM-FRZR OVRLL IMNSIONS FTR PNL INSTLL 38" (96.5) FLUSH
More informationMONOGRAM 48" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 48" UILT-IN SI-Y-SI RFRIGRTOR STION 1 STNR INSTLLTION 1/4" FRM PNLS 3/4" OVRLY PNLS STION 2 FLUSH INST INSTLLTION STNR INSTLLTION 25 1/2" (64.8) 48" (121.9) 23 7/8" (60.7) 1 3/4" (4.4) *84" (213.4)
More informationGE Monogram 36" Built-In French-door Bottom-freezer
SCTION 1 FLUSH INST INSTLLTION SCTION 2 STNDRD INSTLLTION 1/4" FRMD PNLS 3/4" OVRLY PNLS OVRLL DIMNSIONS FLUSH INST INSTLLTION 38" (96.5) 25 7/8" (65.7) 22 3/8" (56.8) 9 5/8" (24.4) 1/2" (1.3) * 83 1/2"
More informationMONOGRAM 36" BUILT-IN ALL-FREEZER
OVERALL DIMENSIONS 36" (91.5) 25 3/4" (65.4) 23 7/8" (60.7) 2 3/4" (7.0) *84" (213.4) *73 1/4" (186.1) *8 (212.1) 64 1/4" (163.2) SPECIFICATIONS Overall Width Overall Height Overall Depth Door Clearance
More informationMONOGRAM 36" BUILT-IN ALL-REFRIGERATOR
OVERALL DIMENSIONS 25 3/4" (65.4) 36" (91.5) 23 7/8" (60.7) 2 3/4" (7.0) *84" (213.4) *8 (212.1) 64 1/4" (163.2) *73 1/4" (186.1) SPECIFICATIONS Overall Width Overall Height Overall Depth Door Clearance
More informationMONOGRAM 36" BUILT-IN ALL-FREEZER
OVERALL DIMENSIONS 36" (91.5) 23 7/8" (60.7) 2 3/4" (7.0) 25 7/8" (65.7) *84" (213.4) 30 1/2" (77.5) *8 (212.1) *73" (185.4) *32 1/4" (82.0) SPECIFICATIONS Overall Width Overall Height Overall Depth Door
More informationOVERALL DIMENSIONS 36" (91.5) (213.4) 84" (213.4 cm) ** Allow 25" (63.5) min clearance for 130 door swing
OVERALL DIMENSIONS 36" (91.5) 25 3/4" (65.4) 23 7/8" (60.7) 2 3/4" (7.0) *84" (213.4) 30 1/2" (77.5) *8 (212.1) *73 1/4" (186.1) *31 3/4" (80.6) SPECIFICATIONS Overall Width Overall Height Overall Depth
More informationZIC360NR GE Monogram 36" Built-In Bottom Freezer Refrigerator with Automatic Icemaker The Installation Space
ZIC360N GE Monogram 36" Built-In Bottom Freezer efrigerator The Installation Space The finished cutout width must be 35-. 84- max 83- min Finished Opening 10" 3 6" The cutout depth must be 24" The refrigerator
More informationCustom. Options Guide. and. Installation Instructions. GE Monogram 36" Built-In Refrigerators. Models: ZIS36NY ZISW36DY ZISB36DY
GE Monogram 36" Built-In Refrigerators Custom Options Guide and Installation Instructions With Custom Panel Dimensions and Trim Kit Installation Instructions Monogram refrigerators offer a range of custom
More informationInstallation Instructions
Installation Instructions 36 Built-In All-Refrigerators and All-Freezers 31-46148-2 224D2601P001 09-13 GE monogram.com Safety Information BEFORE YOU BEGIN Read these instructions completely and carefully.
More informationGE Monogram. Installation. Instructions. 27" Built-In Ovens. Models ZEK757WW ZEK757BW ZEK737WW ZEK737BW
GE Monogram Installation Instructions 27" Models ZEK757WW ZEK757BW ZEK737WW ZEK737BW CAUTION WARNING Before you begin Read these instructions completely and carefully. IMPORTANT: Save these instructions
More informationA great addition to Sub-Zero's complete line of
with Refrigeration Drawers Discreet lighting Full-view glass door (standard) Roller-assembly shelves UV-resistant glass Lighted electronic control panel Divider gasket Model 427R Lighted display shelf
More informationInstallation Instructions
Installation Instructions This kit provides for the installation of a unified grille panel for a framed or overlay custom panel. The panel will span the combined width of a side by side installation. ZUG2
More informationInstallation Instructions
Installation Instructions This kit provides for the installation of a stainless steel unified grille panel. The panel will span the combined width of a side-by-side installation. THE INSTALLATION SPACE
More informationASSEMBLY INSTRUCTIONS TALL CABINET - MODEL CS30
ASSEMLY INSTRUCTIONS TALL CAINET - MOEL CS30 To avoid SERIOUS INJURY or AMAGE to personal belongings: O NOT overload the cabinet or the shelves, maximum weight limit for feet or caster installation is
More informationGE Monogram. Installation. Instructions. Microwave Oven. Under Cabinet Installation. and. JX827 Series Built-In Kit. Models.
GE Monogram Installation Instructions Under Cabinet Installation and JX827 Series Built-In Kit Models ZEM200 Series CAUTION WARNING Before you begin Read these instructions completely and carefully. IMPORTANT:
More informationMONOGRAM 36" INDUCTION COOKTOP
OVRLL IMNSIONS 1 1/16" (2.7) utout overlap 36" (91.4) 33 7/8" (86.0) utout width 5/8" (1.6) utout overlap SPIITIONS Overall Width 36" (91.4 cm) 20 3/8" (51.8) 19 1/8" (48.6) utout depth Overall epth 20
More informationMONOGRAM 36" INDUCTION COOKTOP
OVRLL IMNSIONS 1 1/16" (2.7) utout overlap 36" (91.4) 33 7/8" (86.0) utout width 5/8" (1.6) utout overlap SPIITIONS Overall Width 36" (91.4 cm) 20 3/8" (51.8) 19 1/8" (48.6) utout depth Overall epth 20
More informationInstallation Manual MODEL ANE-42
Installation Manual MODEL ANE-42 GET TO KNOW YOUR UNIT 1 2 1. CROSS BRACES 2. SIDE BRACKETS - Stud Finder - 12-14 Level - Tape Measure - Small Flathead Screwdriver Tools Needed: - Electric Drill (with
More informationInstallation Instructions
Installation Instructions 30 Built-In Wall Oven with Microwave JTP86, JT965 If you have questions, call 1.800.GE.CARES or visit our website at: ge.com Before You Begin Read these instructions carefully
More informationMicrowave Drawer : SMD2470AS, SMD3070AS Installation Manual
SPL WRNN Microwave rawer : SM2470S, SM3070S nstallation Manual NSTLLTON N SRV MUST PRORM Y QUL NSTLLR. MPORTNT: SV this installation manual OR LOL LTRL NSPTOR S US. R N SV TS NSTRUTONS OR UTUR RRN. learances
More informationInstallation. Instructions. Built-In Microwave/Convection and Microwave Ovens. Models ZMC1095 JEB1095 JEB1055
Installation Instructions Built-In Microwave/Convection and Microwave Ovens Models ZMC1095 JEB1095 JEB1055 Before you begin Read these instructions completely and carefully. IMPORTANT: Save these instructions
More informationW INE S TORAGE INSTALLATION INSTRUCTIONS
W INE S TORAGE INSTALLATION INSTRUCTIONS SUB-ZERO WINE STORAGE The importance of the installation of the Sub-Zero Wine Storage unit cannot be overemphasized. Installation should be done by a qualified
More informationRead this booklet carefully to accomplish the desired appearance and to insure a trouble free installation.
GE Monogram 48" Built-In Refrigerators Custom Options Guide and Installation Instructions With Custom Dimensions and Trim Kit Installation Instructions These Monogram built-in refrigerators are designed
More informationInstallation Instructions. Materials Needed. Parts Included. Tools You Will Need
Installation Instructions 27 Built In Wall Oven JKP15, JKP18, JKP27, JKP45, JKP56 JKS05, ZEK937, ZEK957 If you have questions, call 800-GE-CARES or visit our website at: www.geappliances.com Before you
More information6 BAY AV CREDENZA WITH DUAL DISPLAY MOUNT
D2/367M2 SSEMLY INSTRUCTIONS 6 Y V CREDENZ WITH DUL DISPLY MOUNT TIP HZRD WRNING! For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions may result in instability causing
More informationRight Side Trim (qty. 1) GWAKPB283MRF0
30" XTNSON KT: SKM303S NSTLLTON NSTRUTONS MPORTNT NOTS TO T NSTLLR Read all of the nstallation Manual that is included with the Microwave rawer before installing the extension kit. Observe all governing
More information4 BAY Low Profile-Dual Displays WALL MOUNT CABINET
D1/347M2 SSEMLY INSTRUTIONS 4 Y Low Profile-Dual Displays WLL MOUNT INET TIP HZRD WRNING! abinet must be affixed to wall. For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions
More informationE R I E S I O N G U E A L L A T I D II N S T
00 7 0 0 S E R I E S II N S T A L L A T I O N G U E I D SUB-ZERO 700 INSTALLATION GUIDE These pages demonstrate how this product should be installed to function safely and efficiently. However, we realize
More informationInstallation Manual MODEL NE-42
Installation Manual MODEL NE-42 GET TO KNOW YOUR UNIT 1 1. CROSS BRACES - Stud Finder - 12-14 Level - Tape Measure - Small Flathead Screwdriver Tools Needed: - Electric Drill (with 1/4 & 1/8 drill bit)
More information3 BAY AV CREDENZA WITH SINGLE DISPLAY MOUNT
D2/337M1 SSEMLY INSTRUCTIONS 3 Y V CREDENZ WITH SINGLE DISPLY MOUNT TIP HZRD WRNING! For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions may result in instability causing
More informationROCKFORD PROCESS CONTROL, INC.
esigners and Manufacturers of Institutional asework Hardware ROKFOR PROESS ONTROL, IN. 2020 Seventh Street Rockford, IL 61104 Phone: 815-966-2000 Fax: 815-966-2026 sales@rockfordprocess.com www.rockfordprocess.com
More informationI N T E G R A T E D R E F R I G E R A T I O N
I N T E G R A T E D R E F R I G E R A T I O N INSTALLATION INSTRUCTIONS C O N T E N T S Installation Recommendations 3 Installation Specifications 4 Installation Instructions 7 Installation Checklist 18
More informationSliding Door Hardware Installation Instructions ROB ROY
Sliding Door Hardware Installation Instructions ROB ROY Installation Instructions Structural Information For standard systems and most custom single door opening systems. General Overview All Krown Lab
More informationSINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
More informationINSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111
INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111 The GSM-111 static wall mount fits most 23" to 30" displays. The GSM-111 is designed to adapt to VESA 200mm/ 100mm compliant displays.
More informationAgave Standard Series
Mailing Address: 033 San Elijo Ave, #464 Cardiff, CA 9007 619.708.917 619.330.88 fax info@agaveiron.com www.agaveiron.com Agave Standard Series Flat Track Hardware Systems General Information and Installation
More informationJFI2089WTS Panel Dimension Guide 3/4 Overlay Panel Dimensions
These dimensions are for the overlay panels. Dimensions are in inches. DESCR HEIGHT WIDTH THICKNESS 3/4 Overlay Panel Dimensions Upper Overlay Panels 1/4" 36 " 1/4" 17 7/8" 17 7/8 3/4" 16 17 7/8 3/4 15
More informationPULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE
BUILD Stock Item 12229 Drawer s, 2 1 2" x 48" 63420 Baltic Birch Ply, 1/4" x 24" x 30" 38742 Maple, 3/4" x 3" x 24" 45953 100# Zinc Over-Travel Drawer Slides - Centerline 757-20" 30254 #8 x 1 1 4" Square
More information4 BAY Low Profile - SINGLE XL DISPLAY WALL MOUNT CABINET
D1/347Mxl SSEMLY INSTRUCTIONS 4 Y Low Profile - SINGLE XL DISPLY WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use with video monitors weighing 300 lbs (136kg) or less. Use with
More informationInstallation Manual Flat Track Series
Manual Flat Track Series Contents Safety...1 Parts...2 Hardware.......................................... 2 Tools Required..................................... 4.............................................
More informationBarn Door & Hardware Installation Guide
Barn Door & Hardware Guide INTRODUCTION Thank you for purchasing our hardware. Our barn door and hardware will add a stunning accent to your living environment and maximize its space. This manual covers
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationInstallation Instructions
4 3 2 Installation Instructions Self Cleaning Radiant Electric Slide-In Range JSP46, JSP56, JS966 If you have questions, Call 800-GE-CARES or visit our website at: www.geappliances.com Skill Level: High
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationINSTALLATION INSTRUCTIONS 30" (76.2 CM) DROP-IN CERAMIC ELECTRIC RANGE
INSTLLTION INSTRUTIONS 30" (76.2 M) ROP-IN RMI LTRI RN Table of ontents RN STY...1 INSTLLTION RQUIRMNTS...2 Tools and Parts...2 Location Requirements...2 lectrical Requirements...4 ountertop Preparation...4
More informationSAN DIEGO - Corner TV Unit
SN EGO - orner TV Unit ssembly nstructions - lease keep for future reference 385/8651 imensions Width - 100cm epth - 40cm eight - 50cm mportant lease read these instructions fully before starting assembly
More informationCLARK 5-SHELF BOOKCASE
LRK 5-SHELF OOKSE MODEL N0. 06-70-2 SSEMLY INSTRUTIONS IMPORTNT: Please read and understand this manual before any assembly. efore beginning assembly of product, make sure all parts are present. ompare
More informationBUILT-IN EXTENDED HEIGHT GRILLE INSTALLATION GUIDE SPECIFICATIONS, INSTALLATION, AND MORE
BUILT-IN EXTENDED HEIGHT GRILLE INSTALLATION GUIDE SPECIFICATIONS, INSTALLATION, AND MORE Contents 3 Built-In Extended Height Grille 4 Air Flow Requirements 5 Functional Panel 6 Grille Hinging System Features
More informationINSTALLATION INSTRUCTIONS INS T A L L A TIO N INS T R U C TIO N S THE MAVERICK HANGER R H
INS T A L L A TIO N INS T R U C TIO N S THE MAVERICK HANGER 10.6.2016 PARTS INSTALLATION SPECIFICATIONS AND TOOLS INSTRUCTIONS 2-1/4" 2-7/8 11-3/8" 1/4" 2-1/8 PARTS INSTALLATION AND INSTRUCTIONS TOOLS
More informationShetland Stalls Installation Instructions
Shetland Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 1/9/18 Before you start Kit can accommodate up to 12 wide stall front
More informationExtended Height Grille for Built-In
DESIGN & INSTALLATION GUIDE Extended Height Grille for Built-In Extended Height Grille 2 Extended Height Grille This design feature involves potentially hazardous elements consisting of large, heavy panels
More informationMODEL mm Hinges Included MODEL 1432 Hinges Purchased Separately Anti-Rak Cable System Flipper Door Slide Up to 75 lb. [34 kg.
PPLITIONS: Vertically mounted concealed doors for office/ residential storage cabinets, entertainment centers, and armoires. Use model 1332/1432 with unique nti-rak cable system to eliminate door sag and
More informationInstallation Instructions
Installation Instructions 30 Electric Slide-In Range Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: www.geappliances.com BEFORE YOU BEGIN Read these instructions completely and carefully.
More informationInstall Guide. view our Install video guide online
view our Install video guide online CliqStudios.com LLC reserves the right to change, modify or discontinue policy, services and products at any time. All dimensions are nominal. Document only provided
More information4 BAY Low Profile WALL MOUNT CABINET
D1/347 SSEMLY INSTRUCTIONS 4 Y Low Profile WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use to prevent tipping in compliance with capacity of cabinet specified. Use with heavier
More informationInstallation Instructions
Installation Instructions Self-Cleaning Radiant Trivection Electric Slide-In Range JS998 Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: www.geappliances.com BEFORE YOU BEGIN Read
More informationELECTRIC RANGE INSTALLATION MANUAL. Please read these instructions thoroughly before installing and operating the range.
ENGLISH ESPAÑOL INSTALLATION MANUAL ELECTRIC RANGE Please read these instructions thoroughly before installing and operating the range. MODELS LRE30955S LRE30755S LRE30757S LSE3094S LSE3092S LSRE307ST
More informationInstallation Manual MODEL AE-46
Installation Manual MODEL AE-46 GET TO KNOW YOUR UNIT (BOTTOM OF RACEWAY) 2 5 1 4 6 3 1. CROSS BRACES 2. ELECTRICAL RACEWAY 3. SIDE BRACKETS 4. ELECTRICAL CORD COVER 5. ELECTRICAL OUTLET 6. HOT IRON REST
More informationINS T A L L A TIO N INS T R U C TIO N S HORSESHOE W/ BAR HANGER
INS T A L L A TIO N INS T R U C TIO N S HORSESHOE W/ BAR HANGER 6-1/2" 5" 2-7/16" 3-7/16" Ø2-7/8" 4-7/8" 11" 2" 3/16" 1/2" HORSESHOE W/ BAR S P ECIFICATIONS PARTS AND TOOLS Tools Needed Tape Measure Pencil
More informationBUILDERS ONE Framed Cabinet. Installation Manual
BUILDERS ONE Framed Cabinet Installation Manual 1 BEFORE YOU BEGIN: Check your cabinetry against your design plan to ensure that you have all required cabinetry moldings, fillers and accessories to complete
More informationx2 1/4 (6mm) Floor Anchor
INSTALLATION GUIDE Main Components x1 Rail x5 Wall Spacer x2 Anti-jump Block x2 Straight Strap x1 Right Stopper x1 Left Stopper x5 5/16 (8mm x 60mm) Carriage Bolt x5 5/16 (8mm x25mm) Anchor x5 5/16 (8mm
More informationFRAMED CABINETRY INSTALLATION MANUAL
FRAMED CABINETRY INSTALLATION MANUAL AN INDUSTRY GUIDE FOR PROFESSIONAL INSTALLATION RESULTS TO AVOID DAMAGE OR INJURY, READ IN ENTIRETY BEFORE STARTING MATERIAL & TOOL LIST FOR INSTALLATION Safety Glasses
More informationCloset System Installation Manual
Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom
More informationWAREHOUSE HANGER INSTALLATION INSTRUCTIONS R H INS T A L L A TIO N INS T R U C TIO N S
INS T A L L A TIO N INS T R U C TIO N S WAREHOUSE HANGER NOTE: Due to the size and weight of the Warehouse Hanger it is recommended that this Hanger be installed on 3 4 or wider doors. 10.11.2016 2-3/16"
More informationINSTALLATION INSTRUCTIONS INS T A L L A TIO N INS T R U C TIO N S ROD IRON SCROLL HANGER R H
INS T A L L A TIO N INS T R U C TIO N S ROD IRON SCROLL HANGER 10.5.2016 2-1- 3/16" 11/16" 8" 8 O 2-7/8 Ø2-7/8" 3-1/2 3-1/2" 12-9/16 12-9/16" PLEASE NOTE: These instructions are specific to a particular
More informationPART #MSP-DCCST Flat Panel Tilt Mount
INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees
More informationOB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount
INSTALLATION INSTRUCTIONS Interactive Flat Panel Over White Board Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description
More informationMODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
More informationINSTRUCTION SHEET U19
U19 All Refrigerator and All Freezer Trim Kit Installation Product Line: U19 All Refrigerator and All Freezer Models Parts Included in Kit TRIMKITEZ1 (Part# 297333500): Single Trim Kit Components Single
More informationGE Monogram. Installation. Instructions. 36" Vent Hood. Model ZV750. Call anywhere in the US and Canada -
at :: rangehoods. com GE Monogram Instructions Model ZV750 GE Monogram at:: rangehoods. com is a division of CAUTION WARNING Before you begin Read these instructions completely and carefully. IMPORTANT:
More informationSliding Barn Door Hardware Installation Instructions Baldur and Oden
Sliding Barn Door Hardware Installation Instructions Baldur and Oden INSTALLATION INSTUCTIONS Structural Information For standard systems and most custom single door opening systems. General Overview All
More informationJoiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B
Joiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B KIT COMPONENTS Part Illustration Description Rear Bracket Front Lower Bracket Front Upper Bracket KIT APPLICATION This
More informationINSTALLATION INSTRUCTIONS
www.marwincompany.com Kit Number Door Height Rough Opening Height KD200BB68 80 84 ½ KD200BB70 84 88 ½ KD200BB80 96 100 ½ INSTALLATION INSTRUCTIONS 200BB SERIES KD POCKET DOOR FRAME FOR 2 X 4 STUD WALLS
More informationLife's Good. Please read these instructions thoroughly before installing and operating the range. \,J F% U ELECTICDOU LE. P/No.
Life's Good \,J F% U ELECTICDOU LE FN Please read these instructions thoroughly before installing and operating the range. P/No.: MFL63290401 r_ BEFORE YOU BEGIN Remove all tape and packing materials before
More informationMedia Storage Systems Fixed Media Cabinets
Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3
More informationINSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110
INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110 The KWE dual swing arm wall mount is designed to provide a broad range of viewing for Small
More informationCustom. Options Guide. and. Installation Instructions. GE Monogram 42" Built-In Refrigerators. Models: ZIS42N ZISW42D ZISB42D
GE Monogram 42" Built-In Refrigerators Custom Options Guide and Installation Instructions With Custom Dimensions and Trim Kit Installation Instructions These Monogram built-in refrigerators are designed
More informationRLP Mini Low Profile V Track Hardware sliding door hardware/ barn door track
Page 1 of 9 Installation Suggestions for: RLP Mini Low Profile V Track Hardware sliding door hardware/ barn door track Read these instructions to end before starting installation or ordering hardware.
More informationTop Mount Ultra Modern Hanger
Top Mount Ultra Modern Hanger ASSEMBLY INSTRUCTIONS TOP MOUNT ULTRA MODERN HANGER Recommended Tools Level Tape Measure Pencil Drill with 1/8, and 1/4, Drill Bits and Phillips Bit Socket Wrench with 9/16
More informationInstallation Instructions. 45 and 60-Minute Positive Pressure Fire-Rated Veneered Door Frame UBC & UL-10C
Wood Doors Installation Instructions 45 and 60-Minute Positive Pressure Fire-Rated Veneered Door Frame UBC 7-2-1997 & UL-10C Positive Pressure Category Requirements: Category C The Maiman Company Fire
More informationBEFORE YOU BEGIN Read these instructions completely and carefully.
Installation Instructions Above the Cooktop Oven Model JVM2052 Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com BEFORE YOU BEGIN Read these instructions completely
More informationINSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500
INSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500 Specifications: Designed for in-wall installation spanning a minimum of 3 wood studs, 16" on center. Accomodates MWR, PWR and
More informationInstallation Instructions. 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC & UL-10C
Installation Instructions 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC 7-2-1997 & UL-10C Door Requirements: Consult the door manufacturer to make sure that the doors are qualified
More informationSAN DIEGO - TV Unit. Assembly Instructions - Please keep for future reference 389/6620
SN GO - TV Unit ssembly nstructions - Please keep for future reference 389/6620 imensions Width - 125cm epth - 40cm eight - 50cm mportant Please read these instructions fully before starting assembly f
More informationINSTALLATION GUIDE KITCHEN SINKS
INSTALLATION GUIDE KITCHEN SINKS Tools and Materials Tape Measure Safety Glasses Saw Construction Adhsive Suitable Support Framing Material [3/4" (1.9 cm) Max Thickness] Screws Important Information IMPORTANT!
More informationMICROWAVE HOOD COMBINATION INSTALLATION INSTRUCTIONS
MIROWV HOO OMINTION INSTLLTION INSTRUTIONS This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the Installation Requirements section for
More informationMICROWAVE HOOD COMBINATION INSTALLATION INSTRUCTIONS
MIROWV HOO OMINTION INSTLLTION INSTRUTIONS This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the Installation Requirements section for
More information86-1/2" TRACK INSTALLATION GUIDE
BARN TRACK 86-1/2" TRACK INSTALLATION GUIDE READ ALL INSTRUCTIONS AND REVIEW DIAGRAMS BEFORE BEGINNING THE INSTALLATION TO GET A THOROUGH UNDERSTANDING OF THE PROCESS. BEFORE YOU BEGIN This kit comes with
More informationHousehold Appliances. Over-the-Range Microwave. Installation Instructions. For Models: HMV9302, HMV9305, HMV9306, HMV9307
Over-the-Range Microwave Household Appliances Installation Instructions For Models: HMV9302, HMV9305, HMV9306, HMV9307 PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING IMPORTANT: Save these instructions
More informationInstallation Manual MODEL E-42
Installation Manual MODEL E-42 GET TO KNOW YOUR UNIT 2 (BOTTOM OF RACEWAY) 1 3 1. CROSS BRACES 2. ELECTRICAL RACEWAY 3. ELECTRICAL OUTLET - Stud Finder - 12-14 Level - Tape Measure - Small Flathead Screwdriver
More informationAIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS
AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage... 1 Repairing Paint Scratches...1 BASE CABINETS... 2 Drawer Removal and Reinstallation...2 Replacing Drawer
More informationThe Nantucket Legacy Arbor
SSEMLY INSTRUTIONS The Nantucket Legacy rbor Please read through before starting assembly. IMPORTNT: HEK THE INSIDE OF YOUR POSTS FOR LL MTERILS. heck ox for These ontents In. the Keystone event of missing
More information