Architectural hardware products

Transcription

1 rchitectural hardware products

2

3 Table of contents inish chart... iv Packaging, Handing... vi - Hinges and pivots rchitectural hinges... 2 ontinuous hinges - aluminum geared ontinuous hinges - pin and barrel Pivots Pulls and push plates rchitectural pulls and pushbars... 2 ecorative pulls...23 Long door pull Push and pulls plates Protection plates Vandal resistant trim lush pulls...57 ecorative flush pulls Sliding door pulls Screen door pull utomatic flush bolts... 2 onstant latching flush bolts... 6 Manual flush bolts and dust proof strikes oordinators - bar, gravity, carry bar Surface bolts... 2 oor guards... 7 Roller latches...8 ngle stops Latches/catches loor stops and holders... 2 Wall stops/bumpers... 9 Wall holders Kick down holders Plunger door holders Roller bumpers Residential door stops oor silencers...25 rash stops xterior hardware Lock guards... 2 Viewers... 5 oor knockers... 7 Mail slots rackets & hooks... 2 ecorative hooks Window hardware Rescue hardware Index by product description by part number Pulls & plates xterior hardware Ives rchitectural hardware products iii

4 Pulls & plates xterior hardware IVS inish NSI/HM US Number inish description ase material US3 right brass, clear coat luminum US4 Satin brass, clear coat luminum US5 rass, blackened, satin relieved luminum US10 Satin bronze, clear coat luminum US10 ark bronze, oil rubbed luminum US14 right nickel, clear coat luminum US15 Satin nickel, clear coat luminum US26 right chrome luminum US26 Satin chrome luminum -643/ ged bronze, blackened, edge relieved luminum luminum clear coat luminum -LK Matte black luminum -W White luminum US US27 Satin aluminum, clear coated luminum Satin stainless anodized luminum P US28 Satin aluminum, clear anodized luminum Satin brass anodized luminum Satin bronze anodized luminum N ark bronze anodized luminum N lack anodized luminum right chrome anodized luminum Satin chrome anodized luminum US3 right brass, clear coat rass/ronze US4 Satin brass, clear coat rass/ronze US5 Satin brass, blackened, satin relieved rass/ronze US9 right bronze, clear coat rass/ronze US10 Satin bronze, clear coat rass/ronze US10 ark bronze, oil rubbed rass/ronze US10 Satin bronze, relieved, clear coated rass/ronze US11 Satin bronze, blackened, clear coated rass/ronze US14 right nickel, clear coat rass/ronze US15 Satin nickel, clear coat rass/ronze US15 Satin nickel, blackened, satin relieved rass/ronze US26 right chrome rass/ronze US26 Satin chrome rass/ronze US26-M Satin chrome, antimicrobial coating rass/ronze -643/ ged bronze, blackened, edge relieved rass/ronze -LK Matte black rass/ronze US2 603 US2 Zinc plated Steel US2 Zinc plated Steel US3 right brass, clear coat Steel US4 Satin brass, clear coat Steel US5 Satin brass, blackened, satin relieved Steel US10 Satin bronze, clear coat Steel US10 ark bronze, oil rubbed Steel US10 Oxidized brz, relieved, clear coated Steel US11 Satin brz, blackened, relieved, clear Steel US14 right nickel, clear coat Steel US15 Satin nickel, clear coated Steel US15 Satin nickel, blackened, relieved, clear Steel US26 right chrome Steel US26 Satin chrome Steel -643/ ged bronze, blackened, edge relieved Steel -LK Matte black Steel -W White Steel SP ull brass painted ll SP ull bronze painted ll iv Ives rchitectural hardware products

5 IVS inish NSI/HM US Number inish description ase material SP luminum painted ll SP ark bronze painted ll SPLK Matte black ll USP 600 USP Primed for paint ll US US32 right stainless steel Stainless steel US US right stainless steel series Stainless steel US US32 Satin stainless steel Stainless steel US US Satin stainless steel series Stainless steel US Satin stainless steel Stainless steel US32-M Satin stainless, antimicrobial coating Stainless steel Z US3 right brass, clear coat Zinc US4 Satin brass, clear coat Zinc Z US5 Satin brass, blackened, satin relieved Zinc Z US10 ark bronze, oil rubbed Zinc Z US15 Satin nickel, clear coat Zinc Z US26 right chrome Zinc US26 Satin chrome Zinc Z-643/ ged bronze, blackened, edge relieved Zinc Z-LK Matte black Zinc Z-W White Zinc LR lear Plastic LK Matte black Rubber or plastic WHT White Rubber or plastic RY rey Rubber TN Tan Rubber Pulls & plates xterior hardware Ives rchitectural hardware products v

6 Packaging, Handing Packaging key Many Ives items are available in a variety of packaging forms designated by a prefix. The Ives Price ook contains the specific packaging options for each Ives product. elow is a description of these options. Symbol SP escription of package Slim-Pak Pulls & plates oor handing LH INSI RH Left hand Right hand LHR Left hand reverse OUTSI INSI RHR Right hand reverse xterior hardware vi Ives rchitectural hardware products

7 rchitectural hinges, continuous hinges and pivots Table of contents rchitectural hinges eneral hinge information...2 lectrification options...3 How to order:...4 3P1 3 Knuckle, plain bearing full mortise hinge Knuckle, concealed bearing full mortise hinge HW 3 Knuckle, concealed bearing, heavy weight full mortise hinge WT 3 Knuckle, concealed bearing, wide throw full mortise hinge SP1 3 Knuckle, spring full mortise hinge P1 5 Knuckle, plain bearing full mortise hinge Knuckle, ball bearing full mortise hinge HW 5 Knuckle, ball bearing, heavy weight full mortise hinge WT 5 Knuckle, ball bearing, wide throw full mortise hinge S 5 Knuckle, ball bearing, swing clear full mortise hinge S 5 Knuckle, ball bearing, beveled swing clear full mortise hinge SHW 5 Knuckle, ball bearing, swing clear,heavy weight full mortise hinge SHW 5 Knuckle, ball bearing, beveled swing clear, heavy weight full mortise hinge Series Residential hinges ontinuous hinges luminum geared hinges eneral hinge information Mounting hardware lectrification options How to order learance requirements XY ull mortise - narrow frame leaf, wide door leaf XY ull mortise - wide door leaf XY ull mortise - wide throw XY ull mortise - swing clear XY Half surface - narrow frame leaf, wide door leaf XY Half surface - wide door leaf XY Half surface - narrow frame leaf, narrow door leaf XY Half surface - narrow door leaf H ull mortise - narrow frame and door leaf XY ull mortise - narrow frame and door leaf XY ull mortise - narrow frame leaf, door edge protector XY ull surface XY ull surface - swing clear H ull mortise - door edge protector XY ull mortise - door edge protector...37 Pin and barrel hinges eneral hinge information Mounting hardware lectrification options...40 How to order learance requirements ull mortise pin and barrel continuous hinge - steel ull mortise pin and barrel continuous hinge - stainless steel S ull mortise pin and barrel continuous hinge w/ decorative cover ull surface pin and barrel continuous hinge - steel ull surface pin and barrel continuous hinge - stainless steel ull mortise, full wrap pin and barrel continuous hinge - stainless steel Swing clear pin and barrel continuous hinge - steel Swing clear pin and barrel continuous hinge - stainless steel S Swing clear pin and barrel continuous hinge w/ decorative cover ull mortise, half wrap pin and barrel continuous hinge - stainless steel S ull mortise, half wrap pin and barrel continuous hinge w/ decorative cover...50 Pivots eneral information How to order /4" Offset pivot, 200lb with top header mount V 3/4" Offset pivot, 200lb with top jamb mount /4" Offset pivot, 500lb with top header mount /4" Offset pivot, 500lb with top header mount, fire rated /4" Offset pivot, 200lb with top header mount and bottom base mount /4" Offset pivot, 600lb with top header mount and bottom base mount /4" Offset pivot, 600lb with top header mount and bottom base mount, fire rated /4" Offset pivot, 700lb with top header mount and bottom base mount /4" Offset pivot, 700lb with top header mount and bottom base mount, fire rated /4" Offset pivot, 1000lb with top header mount and bottom base mount, fire rated /4" Offset pivot, 1750lb with top header mount and bottom base mount, fire rated /2" Offset pivot, 400lb with top header mount and bottom base mount, fire rated /2" Offset pivot, 500lb with top header mount and bottom base mount, fire rated V-7222 INT 3/4" Offset intermediate pivot INT 3/4" Offset intermediate pivot INT 3/4" Offset intermediate pivot, fire rated INT 3/4" Offset intermediate pivot, fire rated INT 1 1/2" Offset intermediate pivot, fire rated PT-7226PT-7227PT INT 3/4" Offset power transfer intermediate pivot enter hung pivot, 300lb with bottom base mount enter hung pivot, 500lb with bottom base mount J enter hung pivot, 500lb with bottom jamb mount enter hung pivot, 600lb with bottom base mount enter hung pivot, 1000lb with bottom base mount Pocket pivot/hinge, fire rated Pocket pivot/hinge, power transfer, fire rated Pulls & plates xterior hardware Ives rchitectural hardware products 1

8 rchitectural hinges 2 Pulls & plates xterior hardware eneral hinge information Selection of the proper weight and bearing type Standard weight... Plain bearing Standard weight... all bearing, concealed bearing Heavy weight... all bearing, concealed bearing onsiderations to determine weight and bearing type: Weight of door requency of use rame oor hardware lways use ball bearing or concealed bearing hinges for doors with door closers and in all fire rated openings. Heavy weight doors and high frequency doors should use heavy weight ball bearing or concealed bearing hinges. uidelines for hinge metal Interior door or non-corrosive area use: plated or painted steel Interior labeled door use: plated or painted steel, stainless steel Interior door in corrosive area use: stainless steel, brass, bronze xterior doors use: Stainless steel, brass, bronze Standard pin material are brass hinge steel pin, Stainless steel hinge stainless steel pin, steel hinge steel pin uidelines for frequency of door usage: uild type aily usage Hinge type High frequency/ Heavy weight door Large department store entrance 5,000 Heavy weight Hospital corridor and surgical doors 5,000 Heavy weight Large office building entrance 4,000 Heavy weight School entrance 1,250 Heavy weight School toilet door 1,250 Heavy weight Office stairwell 500 Heavy weight Office building toilet door 400 Heavy weight Medium frequency/ Medium weight door School corridor door 100 Standard weight Hospital consultation rooms 100 Standard weight Office building corridor door 80 Standard weight Store toilet door 60 Standard weight Storage room 50 Standard weight Low frequency /Light door Residential entrance 30 Plain bearing Interior residential 20 Plain bearing NSI/HM rade/minimum cycle requirements rade 1: 2,500,000 Heavy Weight all & oncealed earing rade 2: 1,500,000 Standard Weight all & oncealed earing rade 3: 350,000 Light Weight Plain earing onsiderations to determine hinge size oor width oor thickness Weight learance uidelines for hinge height oor thickness oor width Hinge height In inches In inches In inches 1-3/8 Up to /2 1-3/8 32 to /4 Up to /2 1-3/4 36 to /4 Over /2 Up to 42 5 heavy weight 2-2-1/2 Over 42 6 heavy weight learance requirement* oor thickness learance needed Hinge open width 1-3/8 3/ / /4 1-1/2 4-1/2 1-3/ / / / / / / /2 3/ /2 1-3/ / /4 8 * istance needed between wall and door at 180 to allow for any projections from wall; trim, decorative molding, etc. onsult factory technical service for engineered special applications uidelines for number of hinges oors under 7'6"... 3 hinges oors over 7'6"... 4 hinges Location of hinges 5" (127mm) 10" (254mm) qual Top hinge 5" from jamb rabbet to top of barrel ottom hinge 10" from bottom edge of barrel to finished floor Third hinge centered between top and bottom hinges Note: onsult door manufacturer for other hinge locations 2 Ives rchitectural hardware products

9 xterior hardware rchitectural hinges eneral information - electrification options lectrical through-wire (TW4 and TW8) Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Throughwire is rated 50 volts / at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire(tw4) and 8 wire (TW8) installations. vailable ON option comes with the llegion onnect 8-pin onnector which makes it easy to connect to other electrical consumption devices. UL634 Listed Not available 3P1, 3SP1, and 5P1 models Not available on 3.5 x 3.5 size hinges Not available with security stud (SH) option Packaged one hinge per box with standard wood and machine screws Hinge is NRP as a standard High quality brass ferrules and plastic tubing protect the wires Through-wire hinges cycle tested to ensure durability Special wire gauge, number, and color configurations available, contact factory lectrical Monitor (MON, TW4M,TW8M) Provides door position monitoring. Monitor is rated 30 volts / at 0.5 amp. ully compatible with through-wire hinges with 4 wire(tw4m) and 8 wire (TW8M) installations. vailable ON option comes with the llegion onnect 8-pin onnector which makes it easy to connect to other electrical consumption devices. UL634 Listed Not available 3P1, 3SP1, and 5P1 models Not available on 3.5 x 3.5 and 4X4 size hinges Not available with security stud (SH) option Packaged one hinge per box with standard wood and machine screws Hinge is NRP as a standard High quality brass ferrules and plastic tubing protect the wires Through-wire hinges cycle tested to ensure durability Special wire gauge, number, and color configurations available, contact factory 3 Pulls & plates Ives rchitectural hardware products 3

10 rchitectural hinges 4 Pulls & plates xterior hardware Ives Hinge number system Please note: or availability of specific models, please refer to the item s catalog page or consult ustomer Service. How to order: Number of knuckles: 3 3 Knuckle 5 5 Knuckle unction: P Plain bearing all bearing oncealed bearing SP Spring Hinge Type: 1 ull mortise 2 Half mortise 3 ull surface 4 Half surface Weight / Type: lank Standard weight(hm rade 2) HW Heavy weight(hm rade 1) S Swing clear S eveled swing clear SHW Swing clear, heavy weight SHW eveled swing clear, heavy weight WT Wide throw Options: HT Hospital tip SH Security stud (includes NRP as a standard offering) Height x Width 3.5 x x x 4, 4.5, 5, 6 5 x 4.5, 5, 6, 7 onsult model page for availability. inish HM escription Substrate inish 600 Primer paint Steel USP 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Oxidized bronze rass US lackened bronze rass US Satin nickel rass US Matte black rass -LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass -643e/ right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. Options 2 NRP Non-removable pin R-1/4 Rounded corners 1/4" R-5/8 Rounded corners 5/8" S Security screws (hollow metal - hex head pin in socket) TW4 Thru-wire - four wire TW8 Thru-wire - eight wire MON Monitor TW4M Thru-wire - four wire with monitor TW8M Thru-wire - eight wire with monitor ON llegion connect for wire options above HW - SH - 4.5x NRP 4 Ives rchitectural hardware products

11 rchitectural hinges 3P1 3 Knuckle, plain bearing full mortise hinge Recommended for standard weight doors Recommended for low frequency usage Not recommended for use with a door closer Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS x 1/2 UPHMS, 10 x 1 PHWS (3.5x3.5 hinge size only) ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions Made from brass, 1040 steel, or 304 series stainless steel imensions Height x Width Size (mm) auge 3.5 x x x x x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application 3P1 HM escription Substrate inish 600 Primer paint Steel USP 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Oxidized bronze rass US lackened bronze rass US Satin nickel rass US Matte black rass -LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass -643e/ right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. Options NRP...Non-removable pin HT...Hospital tip SH... Security stud - comes standard with NRP R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket 5 Pulls & plates xterior hardware Ives rchitectural hardware products 5

12 rchitectural hinges 6 Pulls & plates xterior hardware 31 3 Knuckle, concealed bearing full mortise hinge Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS x 1/2 UPHMS, 10 x 1 PHWS (3.5x3.5 hinge size only) ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions UL lassified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors Made from brass, 1040 steel, or 304 series stainless steel imensions Height x Width Size (mm) auge 3.5 x x x x x x x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application 31 HM escription Substrate inish Options NRP...Non-removable pin HT...Hospital tip SH... Security stud - comes standard with NRP R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket TW4...our wire TW4M...our wire with monitor TW8...ight wire W8M...ight wire with monitor MON.... Monitor (not available on 3.5X3.5) 600 Primer paint Steel USP 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Oxidized bronze rass US lackened bronze rass US Satin nickel rass US Matte black rass -LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass -643e/ right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. 6 Ives rchitectural hardware products

13 rchitectural hinges 31HW 31HW 3 Knuckle, concealed bearing, heavy weight full mortise hinge Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with two heavy duty concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions UL lassified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors Made from brass, 1040 steel, or 304 series stainless steel imensions Height x Width Size (mm) auge 4.5 x x x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application HM escription Substrate inish Options NRP...Non-removable pin HT....Hospital tip SH... Security stud - comes standard with NRP R-1/4, R-5/8...Rounded corners S...Security fasteners - pin-in-socket TW4....our wire TW4M.... our wire with monitor TW8....ight wire TW8M... ight wire with monitor MON....Monitor 600 Primer paint Steel USP 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Oxidized bronze rass US lackened bronze rass US Satin nickel rass US Matte black rass -LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass -643e/ right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. 7 Pulls & plates xterior hardware Ives rchitectural hardware products 7

14 rchitectural hinges 8 Pulls & plates 31WT 3 Knuckle, concealed bearing, wide throw full mortise hinge Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions 1040 steel imensions Height x Width Size (mm) auge 4.5 x x x x x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application 31WT HM escription Substrate inish 600 Primer paint Steel USP 631 Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. Options NRP...Non-removable pin HT...Hospital tip SH... Security stud - comes standard with NRP R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket TW4...our wire TW4M...our wire with monitor TW8...ight wire TW8M...ight wire with monitor MON...Monitor xterior hardware 8 Ives rchitectural hardware products

15 xterior hardware rchitectural hinges 3SP1 3 Knuckle, spring full mortise hinge or use with doors where self-closing is required Maximum door weight 120 lbs, max door width 36" Maximum labeled door size - 3'0" wide x 7'0" x 1 3/4" thick as set in NP #80 Packed with fasteners for hollow metal and half metal / half wood applications x 1/2 UPHMS, 12 x 1 1/4 PHWS Pin for setting spring tension djusting wrench ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions UL listed for use with fire rated doors imensions Height x Width Size (mm) auge 4 x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application. 3SP1 HM escription Substrate inish Made from 1040 steel or 304 series stainless steel Options R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket 600 Primer paint Steel USP 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. 9 Pulls & plates Ives rchitectural hardware products 9

16 rchitectural hinges 10 Pulls & plates xterior hardware 5P1 5 Knuckle, plain bearing full mortise hinge Recommended for standard weight doors Recommended for low frequency usage Not recommended for use with a door closer Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS x 1/2 UPHMS, 10 x 1 PHWS (3.5x3.5 hinge size only) ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions Made from brass, 1040 steel, or 304 series stainless steel imensions Height x Width Size (mm) auge 3.5 x x x x x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application 5P1 HM escription Substrate inish 600 Primer paint Steel USP 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Oxidized bronze rass US lackened bronze rass US Satin nickel rass US Matte black rass -LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass -643e/ right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. Options NRP...Non-removable pin HT...Hospital tip SH... Security stud - comes standard with NRP R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-insocket 10 Ives rchitectural hardware products

17 rchitectural hinges 51 5 Knuckle, ball bearing full mortise hinge Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS x 1/2 UPHMS, 10 x 1 PHWS (3.5x3.5 hinge size only) ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions UL lassified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors Made from brass, 1040 steel, or 304 series stainless steel imensions Height x Width Size (mm) auge 3.5 x x x x x x x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application 51 HM escription Substrate inish 600 Primer paint Steel USP 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Oxidized bronze rass US lackened bronze rass US Satin nickel rass US Matte black rass -LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass -643e/ right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. Options NRP...Non-removable pin HT...Hospital tip SH... Security stud - comes standard with NRP R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket TW4...our wire TW4M...our wire with monitor TW8...ight wire TW8M...ight wire with monitor MON... Monitor (not available on 3.5X3.5) 11 Pulls & plates xterior hardware Ives rchitectural hardware products 11

18 rchitectural hinges 12 Pulls & plates xterior hardware 51HW 5 Knuckle, ball bearing, heavy weight full mortise hinge Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with four ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions UL lassified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors Made from brass, 1040 steel, or 304 series stainless steel imensions Height x Width Size (mm) auge 4.5 x x x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application 51HW HM escription Substrate inish 600 Primer paint Steel USP 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Oxidized bronze rass US lackened bronze rass US Satin nickel rass US Matte black rass -LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass -643e/ right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. Options NRP...Non-removable pin HT...Hospital tip SH... Security stud - comes standard with NRP R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket TW4...our wire TW4M...our wire with monitor TW8...ight wire TW8M... ight wire with monitor MON...Monitor 12 Ives rchitectural hardware products

19 rchitectural hinges 51WT 51WT 5 Knuckle, ball bearing, wide throw full mortise hinge Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions 1040 steel imensions Height x Width Size (mm) auge 4.5 x x x x x x x x x x Refer to eneral Hinge Information page to determine proper hinge for application HM escription Substrate inish 600 Primer paint Steel USP 631 Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. Options NRP...Non-removable pin HT...Hospital tip SH... Security stud - comes standard with NRP R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket TW4...our wire TW4M... our wire with monitor TW8...ight wire TW8M... ight wire with monitor MON....Monitor 13 Pulls & plates xterior hardware Ives rchitectural hardware products 13

20 rchitectural hinges 14 Pulls & plates Meets NSI/HM Steel 5122 Stainless Steel 2122 rass 51S 5 Knuckle, ball bearing, swing clear full mortise hinge 51S 5 Knuckle, ball bearing, beveled swing clear full mortise hinge esigned to completely clear the opening when door is opened 92. Recommended for use in door opening applications 51S made for square edge doors 51S made for beveled edge doors Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions Made from 1040 steel or 304 series stainless steel imensions Height Size (mm) auge Refer to eneral Hinge Information page to determine proper hinge for application 51S HM escription Substrate inish Options NRP...Non-removable pin HT...Hospital tip R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket TW4...our wire TW4M... our wire with monitor TW8...ight wire TW8M... ight wire with monitor MON...Monitor 600 Primer paint Steel USP 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. xterior hardware 14 Ives rchitectural hardware products

21 rchitectural hinges 51SHW 5 Knuckle, ball bearing, swing clear,heavy weight full mortise hinge 51SHW 5 Knuckle, ball bearing, beveled swing clear, heavy weight full mortise hinge esigned to completely clear the opening when door is opened 92. Recommended for use in door opening applications 51SHW made for square edge doors 51SHW made for beveled edge doors Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with four ball bearing assemblies Packed with fasteners for hollow metal and wood doors x 1/2 UPHMS, 12 x 1 1/4 PHWS ertifications ertified to NSI/HM for performance standards Meets NSI/HM for template hinge dimensions Made from 1040 steel or 304 series stainless steel imensions Height Size (mm) auge Refer to eneral Hinge Information page to determine proper hinge for application 51SHW HM escription Substrate inish Options NRP....Non-removable pin HT...Hospital tip R-1/4, R-5/8...Rounded corners S... Security fasteners - pin-in-socket TW4...our wire TW4M... our wire with monitor TW8...ight wire TW8M... ight wire with monitor MON...Monitor 600 Primer paint Steel USP 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Steel -LK 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US Oxidized bronze Steel US lackened bronze Steel US Satin nickel Steel US right chrome Steel US Satin chrome Steel US26 643e/716 ged bronze Steel -643e/716 or other colors, consult factory. 15 Pulls & plates xterior hardware Ives rchitectural hardware products 15

22 rchitectural hinges 16 Pulls & plates Series Residential hinges 3.5 x 3.5 or 4 x 4 plain bearing hinges utton non-rising pins and caps Recommended for doors weighing less than 70 lbs and not exceeding 3'0" x 7'0" Recommended for low frequency, residential applications Not recommended for use with a door closer or metal door applications see 3P1 and 5P1 models vailable with rounded (1/4" or 5/8") or square corners Packed with fasteners for wood doors #9 x 1 PHWS Made from 1040 steel imensions Model Height x Width (in) orner x 3.5 Square x 3.5 5/8" Radius x 3.5 1/4" Radius x 4 Square x 4 5/8" Radius 51HW HM escription Substrate inish 631 Matte black Steel * right brass Steel Satin nickel Steel right chrome Steel Satin chrome Steel e/716 ged bronze Steel -716 * Only available on 1011 model. or other colors, consult factory. xterior hardware 16 Ives rchitectural hardware products

23 ontinuous hinges Ives ontinuous Hinges are designed to last the life of the building. The unique design distributes the weight of the door along the entire length of the frame, reducing the high amount of stress normally associated at top of door and frame on butt hinge applications. Not only does this reduce hinge failure, it also keeps your door in constant alignment, greatly reducing the chance of door sag. These characteristics make continuous hinges suitable for high use/high traffic doors. The design of a continuous hinge eliminates the gap between the door and the frame. The absence of gap also helps prevents finger from being pinched, making it a safer device than traditional hinges. These benefits result in higher efficiency and less maintenance, maximizing the value of your opening investment. 17 ontinuous hinges are available in two styles; aluminum geared and pin and barrel in steel or stainless steel. luminum geared eared continuous hinges utilize a single gear section for the leaf and a separate gear section for the frame side of the door. The two are held in place together by a full length cover channel and rotate on a series of bearings. Ives provides two unique series of bearing designs. The H model features a spread bearing design for lighter weight doors. The XY features a center load bearing design to help reduce frame issues and also has an available hospital tip cap and electric through wire panel with a continuous cover. Pulls & plates Pin and barrel Pin and arrel hinges share many of the same characteristics of a traditional hinge. oth have a center pin and rolled knuckles. However, a continuous Pin and arrel hinge stretches along the entire length of the frame. IVS offers both stainless steel and primed steel to best match your specific application. Ives also offers the S series pin and barrel hinges which provides a patented solution that brings the clean aesthetic design of aluminum geared continuous hinge to the ruggedness and safety afforded by stainless pin and barrel continuous hinges. xterior hardware Lifetime warranty Ives continuous hinges carry a limited lifetime warranty, ensuring your opening will function to your satisfaction every time. Please refer to the price book for more detailed warranty information. Ives rchitectural hardware products 17

24 luminum geared hinges 18 Pulls & plates xterior hardware eneral hinge information NSI ertified ll Ives luminum geared hinges are certified to NSI , rade 1 XY Models...rade 1 150lb and 300lb door test H Models...rade 1 150lb door test UL Listed ll Ives luminum geared hinges are tested and approved UL 10 (90 minutes). Material 6063-T6 luminum Hinge duty ll Ives luminum geared hinges are heavy duty(xy and H models) XY Model - Slot djustability XY Model - earings H Model XY Models: Rounded gear design for extended life and smoother operation. Patented, center loaded, interlocking bearing design which helps handle the opening and closing of the door better over time. ll sizes have 37 earings. XY Mounting Slot djustability on all full and half surface models to help with installation. rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps. Improved aesthetics with a curved, articulating cover design which eliminates pinch points H Models eatures transmission gear design with bearings that are evenly spaced every 3" on center - mount of bearings varies by size - 83"...32 earings - 85"...32 earings - 95"...36 earings - 120"...47 earings Standard lengths 83", 85", 95", 119"(XY Models), 120"(H Models) ustom lengths available up to 119", consult factory. Handing required for 224H HM US escription ase Material 628 US28 lear aluminum anodized luminum N ark bronze anodized luminum ustom finishes available, consult factory. ield modifications Ives luminum geared continuous hinges can be cut to length from both ends during installation. XY Models The unique mounting pattern of the XY hinge allows it to be cut down to 69" while still having double row fastners regardless of the original length of the hinge. Requires the hinge to be cut from both ends. xample: 119" hinge can have 25" removed from each end to make it a 69" long hinge. H Models The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. oor weight or doors up to 200 lbs, no door reinforcement is required. or doors between 200 and 450 lbs a 16 gauge channel in the frame is required. or doors up to 600 lb, rivet nuts are required in the frame in addition to the frame reinforcement. Max door width of 4'0". Hospital tips Hospital tip (HT) for XY models The new XY models features a new ligature resistant and tamper resistant Hospital Tip ap. The new design provides a single uniform 45 angle surface with no exposed edges or openings. Hospital tips (HT) for H models The standard hospital tip option includes an angle machined channel cover and bearing to provide a flush angled surface. Recommended for HT retrofit applications only. 18 Ives rchitectural hardware products

25 luminum geared hinges Mounting hardware Standard hardware ull mortise hinges Half surface hinges Includes 210XY ull surface hinges 157XY Only x 3/4" Steel self drilling / self tapping phillips head screw x 3/4" Steel self drilling / self tapping phillips head screw x 3/4" Steel self drilling / self tapping hex head screw x 3/4" Steel self drilling / self tapping hex head screw Security screws - Hollow metal door and frame (S/HM) ull mortise hinges X 1/2" Stainless steel socket security screw 112H and 224H only vailable as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) Security screws - 1/2 wood, 1/2 hollow metal (S/W/HM) ull Mortise Hinges 112H and 224H only X 1/2" Stainless steel socket security screw 12 X 1 1/4" Stainless steel socket security wood screw vailable as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) 1/2 Self drill, self tap / 1/2 wood (TK/W) ull mortise hinges x 3/4" Steel self drilling / self tapping phillips head screw 12 x 1 1/4" Phillips head wood screw Half surface hinges x 3/4" Steel self drilling / self tapping phillips head screw 1/4 x 1 1/2" Hex head lag screw ull surface hinges x 3/4" Steel self drilling / self tapping hex head screw 1/4 x 1 1/2" Hex head lag screw Wood door and frame (W) ull mortise hinges Half surface hinges Includes 210XY ull surface hinges 157XY only 12 x 1 1/4" Phillips head wood screw 12 x 1 1/4" Phillips head wood screw 1/4 x 1 1/2" Hex head lag screw 1/4 x 1 1/2" Hex head lag screw Thread forming (T) ull mortise hinges x 3/4" Steel thread forming phillips head screw 112H and 224H only vailable as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) 19 Pulls & plates xterior hardware Ives rchitectural hardware products 19

26 luminum geared hinges 20 Pulls & plates eneral information - electrification options lectric power transfer (PT) availabile on H and XY models lectric power transfer provides the most secure and best solution for transferring power from the door frame to the edge of a swinging door. Ives ontinuous Hinges provide standard cut outs to fit Von uprin PT-2, PT-10 and PNT-1 devices. onsult factory for other electrical cut out options. oor handing is required. *NW* lectrical through-wire panel with llegion onnect (TWP ON) (XY models only) The most secure and best solution for powering your door. The redesigned XY Through-Wire Panel is heavy duty and easy-toinstall. Hinge consists of single piece cover design for improved aesthetics and three sections with a standard bottom length and through wire panel location. The panel can quickly slip in and out of the the hinge for maintenance and replacement. Unlike all of the other manufacturer solutions, the XY throughwire panel maintains a one piece appearance on the cover side of the hinge. The new wire design features a teflon coated wire which greatly improves performance and durability. The new panel also comes standard with the llegion onnect 8-pin onnector which makes it easy to connect to other electrical consumption devices. Warrantied for up to 5 years. oor handing is required. Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylidrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts / at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. PT 112H TWP XY Series lectrical cutouts Ives aluminum continuous hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. When ordering indicate the following: 1. Opening size. 2. Handing. LH, RH, LHR or RHR. 3. Manufacturer and model number of the electrical product being used. xample; Von uprin TPT2 ecause clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives ustomer Technical for specific template information. elow are standard locations for Von uprin PT2 or PT10, and monitor switch. xterior hardware Note: See ordering guide in price book for proper placement. In accordance with industry standards, all cutouts are made from top edge of door to center line of cut-out Standard Length H XY XY PT PT TWP ON 83" 30" 30" 43.5" 85" 32" 32" 45.5" 95" 42" 42" 55.5" 119" (XY) 66" 79.5" 120" (H) 67" 20 XY TWP ON is located 39.5 inches from bottom of the hinge. onsult factory for TWP locations on custom length hinges. Ives rchitectural hardware products

27 luminum geared hinges How to order 112XY HT US28 83 TWP ON 21 Model 026XY 027XY 040XY 041XY 045XY 046XY 053XY 054XY 112XY 112H 114XY 157XY 210XY 224XY 224H Option 1 HT ull mortise - narrow frame leaf, wide door leaf ull mortise - wide door leaf ull mortise - wide throw ull mortise - swing clear Half surface - narrow frame leaf, wide door leaf Half surface - wide door leaf Half surface - narrow frame leaf, narrow door leaf Half surface - narrow door leaf ull mortise - narrow frame and door leaf ull mortise - narrow frame and door leaf ull mortise - narrow frame leaf, door edge protector ull surface - center pivot ull surface - swing clear ull mortise - door edge protector ull mortise - door edge protector Hospital tip (XY models only) (Only available on 026XY, 027XY, 040XY, 112XY, 114XY, 224XY ) inish US28 lear nodized luminum 313N ark ronze nodized luminum 315N lack nodized luminum (XY only) ustom finishes available, consult factory. Length 83" 85" 95" 119"(XY) / 120"(H) ustom lengths available up to 119", consult factory. When specifying length, handing required. Option 2 PT TWP ON SHM SWHM SWW W TKW T TW lectric power transfer prep (Only available on 026XY, 027XY, 112H, 112XY, 114XY, 224H, 224XY ) Handing (LH and RH) Required for 026, 027, 114, and 224 models Through Wire Panel with llegion onnect Standard (Only vailable on 026XY, 027XY, 112XY, 114XY, 224XY ) Security fasteners - pin-in-socket Security fasteners - pin-in-socket (half wood, half hollow metal) Security fasteners - pin-in-socket (wood door and frame) Wood door fasteners Half thread forming, half wood Thread forming screws (pilot hole required) (Only available with 112H and 224H) Half thread forming, half wood Pulls & plates xterior hardware Ives rchitectural hardware products 21

28 luminum geared hinges 22 learance requirements onsult your local authority having jurisdiction for specific fire codes relating to fire rated doors. The table below is only recommended for non fire related doors. Hinge Side learance 1/8 Hinge Side learance 3/16 Hinge Side learance Pulls & plates Single door Model 1/32 rame Irregularity Hinge-side clearance Lock-side clearance rame irregularity 1/16 rame Irregularity eveled door clearance oor under-sizing Square edged 026XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 027XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 040XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 041XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 045XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 046XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 053XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 054XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 112H 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 112XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 114XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 157XY 1/16" 1/8" 1/32" 1/32" 7/32" 1/4" 210XY 1/16" 1/8" 1/32" 1/32" 7/32" 1/4" 224H 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 224XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" eveled edge xterior hardware Pair of doors Model Hinge-side clearance (2 doors) Lock-side clearance rame irregularity (2 doors) eveled door clearance (2 doors) oor under-sizing Square edge total Square edge each door eveled edge total 026XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 027XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 040XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 041XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 045XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 046XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 053XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 054XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 112H 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 112XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 114XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 157XY 1/8" 3/16" 1/16" 1/16" 3/8" 3/16" 7/16" 7/32" 210XY 1/8" 3/16" 1/16" 1/16" 3/8" 3/16" 7/16" 7/32" 224H 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 224XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" eveled edge each door 22 Templates and installation instructions available on line at Ives rchitectural hardware products

29 luminum geared hinges 026XY ull mortise - narrow frame leaf, wide door leaf Wide door leaf for 2" and 2 1/4" doors Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non handed for custom cut lengths 3/32" door inset 48" Maximum door width eveled or square edge doors rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps. or doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Options HT...Hospital tip PT...lectric power transfer TWP ON...lectrical through wire panel with llegion onnect Optional mounting hardware: TKW...1/2 Self drill, self tap 1/2 wood W...Wood door and frame SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame or single door applications: or pairs of doors see chart and general information 23 Pulls & plates 2 11 /16" 1 7 /8" 5/16" learance for Square dge oor 11/32" learance for eveled dge oor 2 3 / xterior hardware Ives rchitectural hardware products 23

30 luminum geared hinges 24 Pulls & plates 027XY ull mortise - wide door leaf Wide door leaf for 2" and 2 1/4" doors Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non handed for custom cut lengths lush mounted, no inset 48" Maximum door width eveled or square edge doors rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Options: HT...Hospital tip PT...lectric power transfer TWP ON...lectrical through wire panel with allegion connect Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information xterior hardware 2 11 /16" 1 7 /8" 2 3 / 5/16" learance for Square dge oor 11/32" learance for eveled dge oor 24 Ives rchitectural hardware products

31 luminum geared hinges 040XY ull mortise - wide throw Wide throw for 1 3/4" doors Patented center loaded, interlocking bearing design Non handed for custom cut lengths lush mounted, no inset 48" Maximum door width eveled or square edge doors rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Options: HT...Hospital tip Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 25 Pulls & plates 1 1 /8" 1 11 /16" 5/16" learance for Square dge oor 11/32" learance for eveled dge oor 1 19 /32" 3 1 /4" xterior hardware Ives rchitectural hardware products 25

32 luminum geared hinges 26 Pulls & plates 041XY ull mortise - swing clear Swing clear for 1 3/4" doors Installs easily on doors with 90 opening oor edge protector Patented center loaded, interlocking bearing design Non handed for custom cut lengths 1/16" door inset 48" Maximum door width eveled or square edge doors or doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 2 31 /32" xterior hardware 1 7 /8" 1 25 /32" 2 5 /32" req d for rotation 5/16" learance for Square dge oor 11/32" learance for eveled dge oor 26 Ives rchitectural hardware products

33 luminum geared hinges 045XY Half surface - narrow frame leaf, wide door leaf Half surface for retrofit or new construction rame leaf depth 1-9/16" Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non handed for custom cut lengths 9/32" door inset rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping hex head screw x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 27 Pulls & plates 3" 2 13 /32" 1 9 /16" 5/32" learance for Square dge oor 3/16" learance for eveled dge oor 2" xterior hardware Ives rchitectural hardware products 27

34 luminum geared hinges 28 Pulls & plates 046XY Half surface - wide door leaf Half surface for retrofit or new construction rame leaf depth 1-7/8" Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non Handed for custom cut lengths 9/32" door inset rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping hex head screw x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 2 11 /16" 3" 2" 1 7 /8" xterior hardware 5/32" learance for Square dge oor 3/16" learance for eveled dge oor 28 Ives rchitectural hardware products

35 luminum geared hinges 053XY Half surface - narrow frame leaf, narrow door leaf Half surface for retrofit or new construction rame leaf depth 1-9/16" Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non handed for custom cut lengths 1/8" door inset rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping hex head screw x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N) ustom nodizing and Painting are available, consult factory lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 29 Pulls & plates 2 13 /32" 1 9 /16" 5/32" learance for Square dge oor 3/16" learance for eveled dge oor 2 1 /32" 1" xterior hardware Ives rchitectural hardware products 29

36 luminum geared hinges 30 Pulls & plates 054XY Half surface - narrow door leaf Half surface for retrofit or new construction rame leaf depth 1-7/8" Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non Handed for custom cut lengths 1/8" door inset rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping hex head screw x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 2 11 /16" 2 1 /32" 1" 1 7 /8" xterior hardware 5/32" learance for Square dge oor 3/16" learance for eveled dge oor 30 Ives rchitectural hardware products

37 luminum geared hinges 112H ull mortise - narrow frame and door leaf or 1 3/4" doors Spread bearing design Non Handed for custom cut lengths lush mounted, no inset 48" Maximum door width eveled or square edge doors or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing ertifications Meets NSI for 150lbs UL10 certified Standard lengths 83", 85", 95", 120" Standard Mounting Hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N) ustom anodizing and painting are available, consult factory. Options: PT...lectric power transfer Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame T...Thread forming screws TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 31 Pulls & plates 2 9 /32" 1 9 /16" evel dge 5/16" learance for Square dge oor 11/32" learance for eveled dge oor xterior hardware Ives rchitectural hardware products 31

38 luminum geared hinges 32 Pulls & plates 112XY ull mortise - narrow frame and door leaf or 1 3/4" doors Patented center loaded, interlocking bearing design Non Handed for custom cut lengths lush mounted, no inset 48" Maximum door width eveled or square edge doors rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Options: HT...Hospital tip PT...lectric power transfer TWP ON...lectrical through wire panel with llegion onnect Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 2 5 /16" 1 9 /16" xterior hardware evel dge 5/16" learance for Square dge oor 11/32" learance for eveled dge oor 32 Ives rchitectural hardware products

39 luminum geared hinges 114XY ull mortise - narrow frame leaf, door edge protector or 1 3/4" doors oor edge protector Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non Handed for custom cut lengths 1/16" door inset 48" Maximum door width eveled or square edge doors rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Options: HT...Hospital tip PT...lectric power transfer TWP ON...lectrical through wire panel with llegion onnect Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 33 Pulls & plates 2 5 /16" 1 9 /16" 5/16" learance for Square dge oor 11/32" learance for eveled dge oor 2 9 /16" xterior hardware Ives rchitectural hardware products 33

40 luminum geared hinges 34 Pulls & plates 157XY ull surface patented easy-to-install, heavy duty, full surface continuous hinge Narrow rame Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door rticulating cover design eliminates pinch point between center channel cover and door and frame leaf covers Non Handed for custom cut lengths 1/16" door inset 48" Maximum door width eveled or square edge doors or doors weighing up to 550 lbs or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 95", 119" Standard mounting hardware x 1/2" Steel self drilling / self tapping hex head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Options: HT...Hospital tip PT...lectric power transfer TWP ON...lectrical through wire panel with llegion onnect Optional mounting hardware: TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 3 3 /16" 7 /8" 1" xterior hardware 1 5 /8" 1 1 /4" 1/16" learance for Square dge oor 3/32" learance for eveled dge oor 34 Ives rchitectural hardware products

41 luminum geared hinges 210XY ull surface - swing clear Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door rticulating cover design eliminates pinch point between center channel cover and door and frame leaf covers Non handed for custom cut lengths 1/32" door inset 48" Maximum door width eveled or square edge doors or doors weighing up to 550 pounds or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping hex head screw x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 3 9 /16" 35 Pulls & plates 1 15 /16" 1 5 /16" 1/16" learance for Square dge oor 3/32" learance for eveled dge oor xterior hardware Ives rchitectural hardware products 35

42 luminum geared hinges 36 Pulls & plates 224H ull mortise - door edge protector or 1 3/4" doors oor edge protector Spread bearing design Non handed for custom cut lengths 1/16" oor Inset 48" Maximum door width eveled or square edge doors or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing ertifications Meets NSI for 150lbs UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N) ustom anodizing and painting are available, consult factory. Options: PT...lectric power transfer Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame T...Thread forming screws TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 2 5 /8" 1 15 /16" 2 19 /32" xterior hardware 5/16" learance for Square dge oor 11/32" learance for eveled dge oor 36 Ives rchitectural hardware products

43 luminum geared hinges 224XY ull mortise - door edge protector or 1 3/4" doors oor edge protector Patented center loaded, interlocking bearing design Non Handed for custom cut lengths 1/16" door inset 48" Maximum door width eveled or square edge doors rame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps or doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing or lead-lined application consult factory for engineering specials ertifications Meets NSI for 150lbs and 300lbs UL10 certified Standard lengths 83", 85", 95", 119" Standard mounting hardware x 3/4" Steel self drilling / self tapping phillips head screw lear nodized (US28), ark ronze nodized (313N), lack nodized (315N) ustom anodizing and painting are available, consult factory. Options: HT...Hospital tip PT...lectric power transfer TWP ON...lectrical through wire panel with llegion onnect Optional mounting hardware: SHM...Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW...Security screws - wood door and frame TKW...1/2 self drill, self tap 1/2 wood W...Wood door and frame or single door applications: or pairs of doors see chart and general information 37 Pulls & plates 2 11 /16" 1 7 /8" 5/16" learance for Square dge oor 11/32" learance for eveled dge oor 2 9 /16" xterior hardware Ives rchitectural hardware products 37

44 Pin and barrel hinges 38 eneral hinge information Pulls & plates xterior hardware 38 ertifications 600 and 700 Series meets NSI , rade 1 H Models, rade 1, 150lb door test S Series models certified NSI , rade 1, 150lb door test UL Listed ll Ives pin and barrel hinges are tested and approved UL 10 (3 hr). Material 600 Series 1012 Series, 14 auge cold-rolled steel 700, 702, 705, 711, 715 Series 304 Series, 14 auge stainless steel S Series 304 Series, 14 auge stainless steel body and 6063-T6 aluminum cover arrel Type Standard series The standard series pin and barrel continuous hinges features twin self lubricated nylon bearings with a stainless steel pin. S Series The S Series is a heavy duty, easy-to-install, stainless steel pin and barrel continuous hinge that can be used for fire applications and is highly suitable for after-market or new construction situations. The patented covers hide the unsightly pin and barrel of the standard pin and barrel hinges, giving the S Series continuous hinge a stylish appearance to accompany heavy duty performance. The S Series includes medical grade, patented nylon winged bearings. They also include the XY adjustability feature which allows for better door alignment during installation. Standard lengths 83", 85", 95", 120" ustom lengths available up to 120", consult factory. Handing required for 702, 705, 711, 715. Ives rchitectural hardware products HM escription Substrate inish 600 Series 600 rey primer paint Steel USP 700, 702, 705, 711, 715 Series 630 Satin stainless steel Stainless steel US32 700S, 705S, 711S Series 441 Satin stainless anodized luminum US32N 600 rey primer paint luminum USP 628 lear aluminum anodized luminum US Satin brass anodized luminum US4N 709 Satin bronze anodized luminum US10N 710 ark bronze anodized luminum 313N 711 lack anodized luminum 315N 712 right chrome anodized luminum US26N 713 Satin chrome anodized luminum US26N ustom finishes available, consult factory. ield modifications Ives pin and barrel continuous hinges can be cut to length during installation. Standard models The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. S Models The unique mounting pattern of the XY hinge allows it to be cut down to 69" while still having double row fasteners regardless of the original length of the hinge. xample: 119" hinge can have 25" removed from each end to make it a 69" long hinge. oor weight or doors up to 200 lbs, no door reinforcement is required. or doors between 200 and 300 lbs, a 16 gauge channel in the frame is required. or doors up to 600 lb (max door width of 4'0"), rivet nuts are required in the frame in addition to the frame reinforcement. Hospital tips (HT) for standard models. The standard hospital tip option includes an angle machined channel cover and bearing to provide a flush angled surface.

45 Pin and barrel hinges Mounting hardware Standard Hardware 600/602/611/700/702/705/711/ x 1/2" Stainless self drilling / self tapping phillips head screw 10 x 1" Stainless phillips head wood screw ( 1/2 pkg for door or frame) 700S/711S/715S x 3/4" Stainless self drilling / self tapping phillips head screw 39 Security screws - hollow metal door and frame (SHM) 600/700/602/702/705/611/711/ X 1/2" Stainless steel Torx security screw 700S/711S/715S x 1/2" Stainless security head machine screw Security screws - 1/2 wood, 1/2 hollow metal (SWHM) 600/700/602/702/705/611/711/ X 1/2" Stainless steel Torx security screw 10 x 1" Stainless Torx security wood screw Security screws - 1/2 wood, 1/2 hollow metal (SWW) 600/700/602/702/705/611/711/ x 1" Stainless Torx security wood screw Wood door and frame (W) 600/602/611/700/702/705/711/ x 1" Stainless phillips head wood screw 700S/711S/715S #12 x 1 1/4" Stainless sheet metal screw Pulls & plates xterior hardware Ives rchitectural hardware products 39

46 Pin and barrel hinges 40 Pulls & plates eneral information - electrification options Only available for the full mortise hinges lectric power transfer (PT) availabile on 600, 700, 705, 715, 700S, 715S models lectric power transfer provides the most secure and best solution for transferring power from the door frame to the edge of a swinging door. Ives Pin and arrel Hinges provide standard cut outs to fit Von uprin PT- 2, PT-10 and PNT-1 devices. onsult factory for other electrical cut out options. oor handing is required. lectrical through-wire (TW8) for standard models (600, 700, 705, 715) only Recommended for low frequency usage. Provides electric power transfer from the frame to the door cable in order to supply power to an electrified mortise or cylidrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts / at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. Requires the door to be torn down for maintenance. vailable ON option comes with the llegion onnect 8-pin onnector which makes it easy to connect to other electrical consumption devices. PT 600/700/ 700S Top of door TW8 600/700s Top of door lectrical through-wire panel with llegion onnect (TWP) (700S models only) The thru-wire panel solution works in the S mortise hinge to maintain the clean aesthetic design of aluminum geared continuous hinges. Made with the same medical grade bearings of Ives other pin and barrel hinges, the S Series brings thruwire panel innovation to your continuous hinge application while keeping its great looks. The S Series thru-wire panel is a heavy duty, easy-to-install, stainless steel panel. Tested to 2.5 million cycles, the S Series panel can quickly slip in and out of the hinge for maintenance and replacement. Unlike all of the other manufacturer solutions the S Series thru-wire panel maintains a one piece appearance on the cover side of the hinge. It installs with the same 5/16" clearance as aluminum geared hinges and works in all of the decorative cover finishes. Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Thru-wire panel is rated 50 volts / at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. vailable ON option comes with the llegion onnect 8-pin onnector which makes it easy to connect to other electrical consumption devices. PT L TW L lectrical utouts Ives Pin & arrel ontinuous Hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. xterior hardware When ordering indicate the following: 1. Opening size. 2. Handing. LH, RH, LHR or RHR. 3. Manufacturer and model number of the electrical product being used. xample; Von uprin TPT2 Note: See ordering guide in price book for proper placement. Standard Length PT TW TWP 83" 30" 43-19/32" 43-13/16" 85" 32" 45-17/32" 44-29/32" 95" 42" 55-17/32" 55-9/32" 120" 67" 80-17/32" 79-1/2" ecause clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives ustomer Technical for specific template information. or your general information following are standard locations for Von uprin PT2 or PT10, and TW (through wire). In accordance with industry standards, all cutouts are made from Top dge of oor to enter Line of ut-out. 40 Ives rchitectural hardware products

47 Pin and barrel hinges How to order Model Stainless steel 700/700S ull Mortise 702 ull Surface - enter Pivot 705 ull mortise - full wrap 711/711S ull surface - swing clear 715/715S ull mortise - half wrap Steel 600 ull mortise 602 ull surface - center pivot 611 ull surface - swing clear Option 1 HT Hospital tip (600 and 700 series only) inish Stainless steel - only available on 700 Series US32 Satin stainless steel Stainless steel / aluminum - only available on S Series US32N Satin stainless anodized USP rey primer paint US28 lear aluminum anodized US4N Satin brass anodized US10N Satin bronze anodized 313N ark bronze anodized 315N lack anodized US26N right chrome anodized US26N Satin chrome anodized 700 HT US32 83 TW8 ON 41 Pulls & plates Steel - only available on 600 Series 600 rey primer paint Length 83" 85" 95" 120" Other lengths available up to 120, consult factory. Handing is required. Option 2 PT TWP TW8 ON SHM SWHM SWW W lectric power transfer prep (600, 700, 705, 715, 700S, 715S models only) Handing (LH and RH) required for 026, 027, 114, and 224 models Through wire panel (only available on 700S) lectric through Wire (600, 700, 705, 715 models only) llegion onnect (600, 700, 705, 715, 700S models only) Security fasteners - Torx Security fasteners - Torx (half wood, half hollow metal) Security fasteners - Torx (wood door and frame) Wood door fasteners xterior hardware Ives rchitectural hardware products 41

48 Pin and barrel hinges 42 learance requirements onsult your local authority having jurisdiction for specific fire codes relating to fire rated doors. The table below is only recommended for non fire related doors. 1/8 Hinge Side learance 3/16 Hinge Side learance Pulls & plates Hinge Side learance 1/32 rame Irregularity 1/16 rame Irregularity Single door oor under-sizing Model Hinge-side clearance Lock-side clearance rame irregularity eveled door clearance Square edged eveled edged 600 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 602 1/8" 1/8" 1/32" 1/32" 9/32" 5/16" 700 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 700S 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 702 1/8" 1/8" 1/32" 1/32" 9/32" 5/16" 705 3/8" 1/8" 1/32" 1/32" 17/32" 9/16" 705* 1/2" 1/8" 1/32" 1/32" 21/32" 11/16" 711 7/32" 1/8" 1/32" 1/32" 3/8" 13/32" 711S 3/8" 1/8" 1/32" 1/32" 17/32" 9/16" 715 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 715S 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" * Use the djusta-studs with 705 xterior hardware Pair of doors oor under-sizing Model Hinge-side clearance Lock-side clearance rame irregularity eveled door clearance Square edge total Square edge each door eveled edge total eveled edge each door 600 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 602 1/8" 3/16" 1/16" 1/16" 1/2" 1/4" 9/16" 9/32" 700 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 700S 5/16" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 702 1/8" 3/16" 1/16" 1/16" 1/2" 1/4" 9/16" 9/32" 705 3/8" 3/16" 1/16" 1/16" 1" 1/2" 1-1/16" 17/32" 705* 1/2" 3/16" 1/16" 1/16" 1-1/4" 5/8" 1-5/16" 21/32" 711 7/32" 3/16" 1/16" 1/16" 11/16" 11/32" 3/4" 3/8" 711S 3/8" 3/16" 1/16" 1/16" 1" 1/2" 1-1/16" 17/32" 715 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 715S 5/16" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" * Use the djusta-studs with Ives rchitectural hardware products

49 Pin and barrel hinges 600 ull mortise pin and barrel continuous hinge - steel 700 ull mortise pin and barrel continuous hinge - stainless steel 1/4" diameter pin with nylon self-lubricating, medical grade split bearing or doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/8 Inset recommended for 1 3/4" doors 48" Maximum door width Non handed for custom cut lengths evel or square edge door ertifications Meets NSI UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware #10 X 1/2" Self rilling, Self Tapping Screws #10 X 1" Wood Screws Material old-rolled steel auge Type 304 stainless steel 2-1/ 4 HM escription Substrate inish 600 rey primer paint Steel USP 630 Satin stainless steel Stainless steel US32 ustom paint available on 600 series, consult factory. Options HT...Hospital tip PT...lectric power transfer TW8...lectrical through wire ON...llegion onnect Optional mounting hardware SHM... Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW... Security screws - wood door and frame W...Wood door and frame or single door applications: or pairs of doors see chart and general information 3 / H i n g e T h i c k n e s s 1/8" 1 / 8 1 / 16 1 / / 4 1/ 4 learance for Square dge 5/16" learance for eveled dge 43 Pulls & plates xterior hardware Ives rchitectural hardware products 43

50 Pin and barrel hinges 44 Pulls & plates 700S ull mortise pin and barrel continuous hinge w/ decorative cover Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation Patented, medical grade, nylon winged bearings or doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non handed evel or square edge door ertifications Meets NSI UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware X 3/4" Self drilling, self tapping screws Material 14 auge Type 304 stainless steel HM escription Substrate inish 441 Satin stainless anodized luminum/steel US32N 600 rey primer paint luminum/steel USP 628 lear aluminum anodized luminum/steel US Satin brass anodized luminum/steel US4N 709 Satin bronze anodized luminum/steel US10N 710 ark bronze anodized luminum/steel 313N 711 lack anodized luminum/steel 315N 712 right chrome anodized luminum/steel US26N 713 Satin chrome anodized luminum/steel US26N ustom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Options HT...Hospital tip PT...lectric power transfer TW8...lectrical through wire ON...llegion onnect Optional mounting hardware SHM... Security screws - hollow metal door and frame W...Wood door and frame or single door applications: or pairs of doors see chart and general information xterior hardware 44 Ives rchitectural hardware products

51 Pin and barrel hinges 602 ull surface pin and barrel continuous hinge - steel 702 ull surface pin and barrel continuous hinge - stainless steel 1/4" diameter pin with nylon self-lubricating, medical grade split bearing or doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing lush mounted, no inset 48" Maximum door width Non handed for custom cut lengths evel or square edge door ertifications Meets NSI UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws over clips Material old-rolled steel auge Type 304 stainless steel 7/16 HM escription Substrate inish 600 rey primer paint Steel USP 630 Satin stainless steel Stainless steel US32 ustom paint available on 600 series, consult factory. Options HT...Hospital tip Optional mounting hardware SHM... Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW... Security screws - wood door and frame W...Wood door and frame or single door applications: or pairs of doors see chart and general information 1-3/4 1-3/ Hinge Thickness 1/ 8 Ives / / 4 learance for Square dge 5/32" learance for eveled dge 45 Pulls & plates xterior hardware Ives rchitectural hardware products 45

52 Pin and barrel hinges 46 Pulls & plates 705 ull mortise, full wrap pin and barrel continuous hinge - stainless steel ull wrap edge guard djustable for undersized and out of square doors 1/4" diameter pin with nylon self-lubricating, medical grade split bearing or doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing lush mounted, no inset 48" Maximum door width Non handed, handing required for custom cut lengths evel or square edge door ertifications Meets NSI UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws Material 14 auge Type 304 stainless steel HM escription Substrate inish 630 Satin stainless steel Stainless steel US32 ustom paint available, consult factory. Options HT...Hospital tip PT...lectric Power Transfer TW8...lectrical Through Wire ON...llegion onnect Optional mounting hardware SHM... Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW... Security screws - wood door and frame W...Wood door and frame or single door applications: or pairs of doors see chart and general information H i n g e T h i c k n e s s / 8 xterior hardware 2-1/4 1-7/8 Note: Provide djustment / / 4 3/16 3/ 8 3/8" learance for Square dge 13/32" learance for eveled dge * djusta-stud allows up to 3/8 width adjustment which ensures proper alignment and easy installation. djusta-stud also makes it possible for future adjustments of the door on the frame through repositioning. 46 Ives rchitectural hardware products

53 Pin and barrel hinges 611 Swing clear pin and barrel continuous hinge - steel 711 Swing clear pin and barrel continuous hinge - stainless steel dge guard May be difficult to install on inside walls 1/4" diameter pin with nylon self-lubricating, medical grade split bearing or doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 48" Maximum door width Non handed, handing required for custom cut lengths Square edge door ertifications Meets NSI UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws Material cold-rolled steel auge Type 304 stainless steel HM escription Substrate inish 600 rey primer paint Steel USP 630 Satin stainless steel Stainless steel US32 ustom paint available on 600 series, consult factory. Options HT...Hospital tip Optional mounting hardware SHM... Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW... Security screws - wood door and frame W...Wood door and frame 47 Pulls & plates or single door applications: or pairs of doors see chart and general information 1 / / 8 1-9/ H i n g e T h i c k n e s s 5 / 32 3 / 4 3 / / 4 7/32" learance for Square dge xterior hardware Ives rchitectural hardware products 47

54 Pin and barrel hinges 48 Pulls & plates 711S Swing clear pin and barrel continuous hinge w/ decorative cover Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation dge guard asy to install mounting location on mortise end of frame 2-11/16" minimum frame face requirement Patented, medical grade, nylon winged bearings or doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non Handed, handing required for custom cut lengths Square edge door ertifications Meets NSI UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware X 3/4" Self drilling, self tapping screws Material 14 auge Type 304 stainless steel HM escription Substrate inish 441 Satin stainless anodized luminum/steel US32N 600 rey primer paint luminum/steel USP 628 lear aluminum anodized luminum/steel US Satin brass anodized luminum/steel US4N 709 Satin bronze anodized luminum/steel US10N 710 ark bronze anodized luminum/steel 313N 711 lack anodized luminum/steel 315N 712 right chrome anodized luminum/steel US26N 713 Satin chrome anodized luminum/steel US26N ustom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Optional mounting hardware SHM... Security screws - hollow metal door and frame W...Wood door and frame or single door applications: or pairs of doors see chart and general information xterior hardware 48 Ives rchitectural hardware products

55 Pin and barrel hinges 715 ull mortise, half wrap pin and barrel continuous hinge - stainless steel Half wrap edge guard 1/4" diameter pin with nylon self-lubricating, medical grade split bearing or doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non handed, handing required for custom cut lengths Square edge door ertifications Meets NSI UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware #10 X 1/2" Self rilling, Self Tapping Screws #10 X 1" Wood Screws Material 14 auge Type 304 Stainless Steel HM escription Substrate inish 630 Satin stainless steel Stainless steel US32 ustom paint available on 600 series, consult factory. Options HT...Hospital tip PT...lectric power transfer TW8...lectrical through wire ON...llegion onnect Optional mounting hardware SHM... Security screws - hollow metal door and frame SWHM Security screws - 1/2 wood, 1/2 hollow metal SWW... Security screws - wood door and frame W...Wood door and frame or single door applications: or pairs of doors see chart and general information 49 Pulls & plates 1 / H i n g e T h i c k n e s s 3 / / 4 3 / 4 1/4" / 4 learance for Square dge xterior hardware Ives rchitectural hardware products 49

56 Pin and barrel hinges 50 Pulls & plates 715S ull mortise, half wrap pin and barrel continuous hinge w/ decorative cover Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation Half wrap edge guard Patented, medical grade, nylon winged bearings or doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing lush mounted, no inset 48" Maximum door width Non handed, handing required for custom cut lengths Square edge door ertifications Meets NSI UL10 certified Standard lengths 83", 85", 95", 120" Standard mounting hardware X 3/4" Self drilling, self tapping screws Material 14 auge Type 304 stainless steel HM escription Substrate inish 441 Satin stainless anodized luminum/steel US32N 600 rey primer paint luminum/steel USP 628 lear aluminum anodized luminum/steel US Satin brass anodized luminum/steel US4N 709 Satin bronze anodized luminum/steel US10N 710 ark bronze anodized luminum/steel 313N 711 lack anodized luminum/steel 315N 712 right chrome anodized luminum/steel US26N 713 Satin chrome anodized luminum/steel US26N ustom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Options PT...lectric power transfer Optional mounting hardware SHM... Security screws - hollow metal door and frame W...Wood door and frame or single door applications: or pairs of doors see chart and general information xterior hardware 50 Ives rchitectural hardware products

57 xterior hardware Pivots The door rests on the bottom pivot in this application. This reduces the stress on the frame by distributing the weight of the door throughout the floor and structure. y taking advantage of the strength of the structure, this makes a pivot the ideal solution for your heavy doors. enter and pocket pivots also provide an aesthetic option for your opening. Used in conjunction with rescue hardware, center hung pivots allows a bi-directional door swing in emergency situations. When a patient becomes trapped behind an inward swing door, the center tong depresses allowing the door to swing in the opposite direction without causing damage to the frame. 51 Pulls & plates Ives rchitectural hardware products 51

58 Pivots 52 Pulls & plates eneral information omplete line of 3/4" offset, 1-1/2" offset, center hung, intermediate and power transfer pivots with all exposed parts made of brass or stainless steel for maximum corrosion resistance. esigned for heavy weight doors in high frequency(above 1250 cycles per day) applications. NSI RTII ll Ives Pivots are certified to NSI , rade 1 UL LIST ll Ives non-rated brass Pivots are tested and approved UL 10 (20 min). ll Ives rated stainless steel Pivots are tested and approved UL 10 (3 hrs). MTRIL High strength brass and 304 series stainless steel forgings, and castings for rated and non-rated doors combined with radial and needle precision bearings for smooth operation. See specific models for more information. PIVOT UTY Last digit in pivot set number reflects the maximum door weight in hundreds of pound, e.g., 7215 = 500 pounds. or sets designated as heavy duty, add 1,000 pounds, e.g., 7237 H set = 1700 pounds. Pivots for lead lined doors are available. Verify location and size of lead lining in door to determine product compatibility. onsult product support. See table below for selecting the proper pivot for the application. dd additional Intermediate Pivots for each 100 pounds of door weight and/or for doors exceeding 7' in height. Intermediate pivots should be placed every 2'6" as needed. MOUNTIN HRWR Stainless steel machine screws and wood screws standard for all metal door and frames and metal frame/wood door applications. Positive locking vertical adjustment mechanism allows the installer to precisely position the door and balance the load. INISHS HM escription Substrate inish 600 Primer paint Stainless steel USP 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US right stainless Stainless steel US32* 630 Satin brass Stainless steel US32* 631 Matte black Stainless steel LK 632* Satin brass Steel US3 639* Satin bronze Steel US10 640** Oil rubbed bronze Steel US10 646** Satin nickel Steel US15 643e/716 ged bronze rass/stainless 643e/ luminum painted rass/stainless SP ronze painted rass/stainless SP ark bronze painted rass/stainless SP rass painted rass/stainless SP4 * vailable on fire-rated pivots and pocket pivots only. ** vailable on pocket pivots only or other colors, consult product support. LTRIITION OPTIONS lectrified pivots are non-load bearing. Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Throughwire is rated 50 volts / at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. The Ives Power Transfer Intermediate (PT INT) pivots and lectrified Pocket Pivot () are available standard with 4 wire. Other wire applications are available, consult product support. These are also available with the llegion onnect 4 or 8-pin onnector (ON) which makes it easy to connect to other electrical consumption devices. xterior hardware When ordering separate pivot applications, 7200 SRIS PIVOT SLTION HRT the following descriptions will be used for the pivot. Pivot set Pivot type ottom style mounting UL listing Max. door weight Handing Top ottom Intermediate /4" Offset Jamb mounted none 200 LH or RH TOP 7212 TM V-7222 INT 7212V 3/4" Offset Jamb mounted none 200 LH or RH 7212V TOP 7212 TM V-7222 INT /4" Offset Jamb mounted 20 Minute 500 LH or RH TOP 7215 TM INT /4" Offset Jamb mounted 3 Hour 500 LH or RH TOP 7215 TM INT /4" Offset loor mounted none 200 LH or RH TOP 7222 TM V-7222 INT /4" Offset loor mounted 20 Minute 600 Non-handed TOP 7226 TM INT /4" Offset loor mounted 3 Hour 600 Non-handed TOP 7226 TM INT /4" Offset Mortise cement case 20 Minute 700 Non-handed TOP 7227 TM INT /4" Offset Mortise cement case 3 Hour 700 Non-handed TOP 7227 TM INT /4" Offset loor mounted 3 Hour 1,000 Non-handed TOP 7230 TM INT /4" Offset Mortise cement case 3 Hour 1,750 Non-handed TOP 7237 TM INT /2" Offset loor mounted 3 Hour 400 Non-handed TOP 7244 TM INT /2" Offset Mortise cement case 3 Hour 500 Non-handed TOP 7245 TM INT 7253 enter hung loor mounted none 300 Non-handed J-7256 TOP 7253 TM INT 7255 enter hung loor mounted none 500 Non-handed J-7256 TOP 7255 TM none 7255J enter hung Jamb mounted none 500 Non-handed J-7256 TOP 7255J TM none 7256 enter hung Mortise cement case none 600 Non-handed J-7256 TOP 7256 TM none 7259 enter hung Mortise cement case none 1,000 Non-handed 7259 TOP 7259 TM none 52 Ives rchitectural hardware products

59 Pivots How to order Model V J Style ST TOP TM INT PT INT Top and bottom set Top pivot only ottom pivot only Intermediate pivot only Power transfer intermediate pivot only vailable only with 7215, 7226, and ST - LH - US3 53 Pulls & plates Handing LH Left hand door RH Right hand door Required on 7212, 7212V, 7222, all INT, and all PT INT. inish HM escription inish 600 Primer paint USP 605 right brass US3 606 Satin brass US4 610 Satin bronze US Oil rubbed bronze US Satin nickel US Matte black LK 625 right chrome US Satin chrome US right stainless US32* 630 Satin brass US32* 643e/716 ged bronze 643e/ luminum painted SP ronze painted SP ark bronze painted SP rass painted SP4 * Only available on (fire rated) models. or other colors, consult factory. xterior hardware Ives rchitectural hardware products 53

60 Pivots 54 Pulls & plates Top tm /4" Offset pivot, 200lb with top header mount Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7212 Set (7212 Top and 7212 tm) 7212 Top ( Top), header mount 7212 tm (7212 tm), jamb mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors Made from cast brass See finishes below vailable accessory items Use 7212 INT ( V-7222) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. Top tm 7212V 3/4" Offset pivot, 200lb with top jamb mount Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7212V Set (7212V Top and 7212 tm) 7212V Top (7212V), jamb mount 7212 tm (7212 tm), jamb mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors Made from cast brass See finishes below. vailable accessory items Use 7212 INT ( V-7222) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. xterior hardware 7212 and 7212V HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. 54 Ives rchitectural hardware products

61 Pivots Top tm /4" Offset pivot, 500lb with top header mount /4" Offset pivot, 500lb with top header mount, fire rated Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7215 Set (7215 Top and 7215 tm) 7215 Top ( Top), header mount 7215 tm (7215 tm), jamb mount 7215 Set (7215 Top and 7215 tm) 7215 Top ( Top), header mount 7215 tm (7215 tm), jamb mount Optional WP resistant bottom pivot is modified for improved corrosion resistance vailable in US26 (626) or US32 (630) only ertifications Meets NSI/HM UL Listed, 20 minute fire doors UL Listed, 3 hour fire doors 7215 HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP Made from cast brass Made from 304 series stainless steel vailable accessory items Use 7215 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. Use 7215 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. or electrical applications, use 7215PT INT ( PT INT) Power Transfer Intermediate pivot. or additional electrical wiring applications, consult product support. HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory. 55 Pulls & plates xterior hardware Ives rchitectural hardware products 55

62 Pivots 56 Pulls & plates Top /4" Offset pivot, 200lb with top header mount and bottom base mount Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7222 Set (7222 Top and 7222 tm) 7222 Top ( Top), header mount 7222 tm (7222 tm), base plate mount ertifications Meets NSI/HM Made from cast brass vailable accessory items Use 7222 INT ( V-7222) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. tm xterior hardware 7222 HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. 56 Ives rchitectural hardware products

63 Pivots Top tm /4" Offset pivot, 600lb with top header mount and bottom base mount /4" Offset pivot, 600lb with top header mount and bottom base mount, fire rated Maximum door load 600 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7226 Set (7226 Top and 7226 tm) 7226 Top ( Top), header mount 7226 tm (7226 tm), base plate mount 7226 Set (7226 Top and 7226 tm) 7226 Top ( Top), header mount 7226 tm (7226 tm), base plate mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors UL Listed, 3 hour fire doors Made from cast brass Made from 304 series stainless steel vailable accessory items Use 7226 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. Use 7226 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. or electrical applications, use 7226PT INT ( PT INT) Power Transfer Intermediate pivot. or additional electrical wiring applications, consult product support. 57 Pulls & plates 7226 HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory. Ives rchitectural hardware products 57 xterior hardware

64 Pivots 58 Pulls & plates Top tm /4" Offset pivot, 700lb with top header mount and bottom base mount /4" Offset pivot, 700lb with top header mount and bottom base mount, fire rated Maximum door load 700 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7227 Set (7227 Top and 7227 tm) 7227 Top ( Top), header mount 7227 tm (7227 tm), base plate mount 7227 Set (7227 Top and 7227 tm) 7227 Top ( Top), header mount 7227 tm (7227 tm), base plate mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors UL Listed, 3 hour fire doors Made from cast brass Made from 304 series stainless steel vailable accessory items Use 7227 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. Use 7227 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. or electrical applications, use 7227PT INT ( PT INT) Power Transfer Intermediate pivot. or additional electrical wiring applications, consult product support HM escription Substrate inish xterior hardware 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP HM escription Substrate inish 58 Ives rchitectural hardware products 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory.

65 Pivots Top tm /4" Offset pivot, 1000lb with top header mount and bottom base mount, fire rated Maximum door load 1000 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7230 Set (7230 Top and 7230 tm) 7230 Top ( Top), header mount 7230 tm (7230 tm), base plate mount ertifications Meets NSI/HM UL Listed, 3 hour fire doors Made from 304 series stainless steel vailable accessory items Use 7230 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. or additional electrical wiring applications, consult product support. 59 Pulls & plates 7230 HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory. xterior hardware Ives rchitectural hardware products 59

66 Pivots 60 Pulls & plates Top tm /4" Offset pivot, 1750lb with top header mount and bottom base mount, fire rated Maximum door load 1750 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7237 Set (7237 Top and 7237 tm) 7237 Top ( Top), header mount 7237 tm (7237 tm), mortised cement case mount ertifications Meets NSI/HM UL Listed, 3 hour fire doors Made from 304 series stainless steel vailable accessory items Use 7237 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. or additional electrical wiring applications, consult product support. xterior hardware 7237 HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory. 60 Ives rchitectural hardware products

67 Pivots Top tm /2" Offset pivot, 400lb with top header mount and bottom base mount, fire rated Maximum door load 400 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7244 Set (7244 Top and 7244 tm) 7244 Top ( Top), header mount 7244 tm (7244 tm), base mount ertifications Meets NSI/HM UL Listed, 3 hour fire doors Made from 304 series stainless steel vailable accessory items Use 7244 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. or additional electrical wiring applications, consult product support. 61 Pulls & plates 7244 HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory. xterior hardware Ives rchitectural hardware products 61

68 Pivots 62 Pulls & plates Top tm /2" Offset pivot, 500lb with top header mount and bottom base mount, fire rated Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7245 Set (7245 Top and 7245 tm) 7245 Top ( Top), header mount 7245 tm (7245 tm), mortised cement case mount ertifications Meets NSI/HM UL Listed, 3 hour fire doors Made from 304 series stainless steel vailable accessory items Use 7245 INT ( ) Intermediate Pivot (handed) as needed. See eneral Information for specifics on how many intermediate pivots are recommended. or additional electrical wiring applications, consult product support HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory. xterior hardware 62 Ives rchitectural hardware products

69 Pivots NP 80, Section requires intermediate pivot on some fire door applications, consult product support. Use for door heights over 7'0" and one every 2'6" as needed V-7222 INT 3/4" Offset intermediate pivot This intermediate pivot is used with 7212, 7212V, and 7222 offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH ertifications Meets NSI/HM UL Listed, 20 minute fire doors Made from cast brass 63 Pulls & plates V-7222 INT HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. xterior hardware Ives rchitectural hardware products 63

70 Intermediate Pivots 64 Pulls & plates NP 80, Section requires intermediate pivot on some fire door applications, consult product support. Use for door heights over 7'0" and one every 2'6" as needed INT 3/4" Offset intermediate pivot INT 3/4" Offset intermediate pivot, fire rated intermediate pivot is used with 7215, 7226, and 7227 offset pivots intermediate pivot is used with 7215, 7226, and 7227 offset pivots. Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH ertifications Meets NSI/HM UL Listed, 20 minute fire doors Meets NSI/HM UL Listed, 3 hour fire doors Made from cast brass Made from 304 series stainless steel INT HM escription Substrate inish xterior hardware 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP INT HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory. 64 Ives rchitectural hardware products

71 Intermediate Pivots NP 80, Section requires intermediate pivot on some fire door applications, consult product support. Use for door heights over 7'0" and one every 2'6" as needed INT 3/4" Offset intermediate pivot, fire rated This intermediate pivot is used with 7230 and 7237 offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH ertifications Meets NSI/HM UL Listed, 3 hour fire doors Made from 304 series stainless steel 65 Pulls & plates INT 1 1/2" Offset intermediate pivot, fire rated This intermediate pivot is used with 7244 and 7245 offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH ertifications Meets NSI/HM UL Listed, 3 hour fire doors Made from 304 series stainless steel INT and INT HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US Matte black Stainless steel LK 632 right brass Stainless steel US3 639 Satin bronze Stainless steel US ged bronze Stainless steel 643e/ luminum painted Stainless steel SP ronze painted Stainless steel SP ark bronze painted Stainless steel SP rass painted Stainless steel SP4 or other colors, consult factory. Ives rchitectural hardware products 65 xterior hardware

72 Pivots 66 Pulls & plates 7215PT-7226PT-7227PT INT 3/4" Offset power transfer intermediate pivot 7215PT-7226PT-7227PT intermediate pivot is used with 7215, 7226, and 7227 offset pivots. Non-load bearing omes standard with 28 gauge TW4. or additional electrical wiring applications, consult product support. Rated 50 V or 3.5 amps. ontinuous or 16 amp pulse, maximum pulse 400 milliseconds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH ertifications UL Listed, 20 minute fire doors Meets UL 634 Made from cast brass xterior hardware 7215PT-7226PT-7227PT INT HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. 66 Ives rchitectural hardware products

73 Pivots Top tm Table learance epth of Mortise 3/16" (5mm) 1-3/16" (30mm) 3/8" (10mm) 1" (25mm) 1/2" (13mm) 7/8" (22mm) 5/8" (16mm) 3/4" (19mm) 3/4" (19mm) 5/8" (16mm) 7253 enter hung pivot, 300lb with bottom base mount Maximum door load 300 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" asy installation, tilt on bearing and bearing pin djustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7253 Set (7253 Top and 7253 tm) 7253 Top ( J-7256 Top), header mount 7253 tm (7253 tm), base plate mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors 7253 Made from cast brass imensions Radius Stop () to clear heel of door edge. Pivot distance () 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. learance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise ( ) in the bottom of the door, refer to hart. onsult product support when clearance is over 3/4" (19mm). HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. 67 Pulls & plates xterior hardware Ives rchitectural hardware products 67

74 7255 Pivot Set Pivots 68 Pulls & plates Top tm Table learance epth of Mortise 3/16" (5mm) 1-3/16" (30mm) 3/8" (10mm) 1" (25mm) 1/2" (13mm) 7/8" (22mm) 5/8" (16mm) 3/4" (19mm) 3/4" (19mm) 5/8" (16mm) 7255 enter hung pivot, 500lb with bottom base mount Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" asy installation, tilt on bearing and bearing pin djustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7255 Set (7255 Top and 7255 tm) 7255 Top ( J-7256 Top), header mount 7255 tm (7255 tm), base plate mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors Made from cast brass imensions Radius Stop () to clear heel of door edge. Pivot distance () 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. learance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm)to 3/4" (19mm) by varying the depth of the mortise ( ) in the bottom of the door, refer to hart. onsult product support when clearance is over 3/4" (19mm) HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. xterior hardware 68 Ives rchitectural hardware products

75 Pivots Top tm Table learance epth of Mortise 3/16" (5mm) 1-3/16" (30mm) 3/8" (10mm) 1" (25mm) 1/2" (13mm) 7/8" (22mm) 5/8" (16mm) 3/4" (19mm) 3/4" (19mm) 5/8" (16mm) 7255J 7255 enter hung pivot, 500lb with bottom jamb mount Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" asy installation, tilt on bearing and bearing pin djustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7255J Set (7255J Top and 7255J tm) 7255J Top ( J-7256 Top), header mount 7255J tm (7255J tm), jamb mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors Made from cast brass imensions Radius Stop () to clear heel of door edge. Pivot distance () 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. learance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise ( ) in the bottom of the door, refer to hart. onsult product support when clearance is over 3/4" (19mm). HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. 69 Pulls & plates xterior hardware Ives rchitectural hardware products 69

76 Pivots 70 Pulls & plates Top tm Table learance epth of Mortise 3/16" (5mm) 1-3/16" (30mm) 3/8" (10mm) 1" (25mm) 1/2" (13mm) 7/8" (22mm) 5/8" (16mm) 3/4" (19mm) 3/4" (19mm) 5/8" (16mm) 7256 enter hung pivot, 600lb with bottom base mount Maximum door load 600 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" asy installation, tilt on bearing and bearing pin djustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7256 Set (7256 Top and 7256 tm) 7256 Top ( J-7256 Top), header mount 7256 tm (7255J tm), base plate mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors 7256 Made from cast brass imensions Radius Stop () to clear heel of door edge. Pivot distance () 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. learance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise ( ) in the bottom of the door, refer to hart. onsult product support when clearance is over 3/4" (19mm). HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. xterior hardware 70 Ives rchitectural hardware products

77 Pivots Table Top tm learance epth of Mortise 3/16" (5mm) 1-3/16" (30mm) 3/8" (10mm) 1" (25mm) 1/2" (13mm) 7/8" (22mm) 5/8" (16mm) 3/4" (19mm) 3/4" (19mm) 5/8" (16mm) 7259 enter hung pivot, 1000lb with bottom base mount Maximum door load 1000 pounds Recommended for use with 2" to 3" minimum door thickness, consult product support if doors are thicker than 3" Not recommended for doors larger than 4'0" X 8'0" asy installation, tilt on bearing and bearing pin djustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7259 Set (7259 Top and 7259 tm) 7259 Top (7259 Top) header mount 7259 tm (7259 tm), base frame mount ertifications Meets NSI/HM UL Listed, 20 minute fire doors Made from cast brass imensions Radius Stop () to clear heel of door edge. Pivot distance () 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. learance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise ( ) in the bottom of the door, refer to hart. onsult product support when clearance is over 3/4" (19mm) HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 610 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/ luminum painted rass SP ronze painted rass SP ark bronze painted rass SP rass painted rass SP4 or other colors, consult factory. 71 Pulls & plates xterior hardware Ives rchitectural hardware products 71

78 Pivots 72 Pulls & plates Pocket pivot/hinge, fire rated Maximum door load of 90 pounds per pivot Use three pivots for doors 7'0" tall and one every 2'6" for taller doors as needed ull mortise Recommended for use with 1-3/4" door thickness only Not recommended for doors larger than 4'0" X 8'0" Not recommended for wood frames llows door to open a full 90 Non-handed ertifications Meets NSI/HM UL Listed, 3 hour fire doors Made from 304 series stainless steel HM escription Substrate inish 600 Primer painted Stainless steel USP 629 right stainless Stainless steel US Satin stainless Stainless steel US right brass Stainless steel US3 639 Satin bronze Stainless steel US Satin bronze Stainless steel US Satin nickel Stainless steel US ged bronze Stainless steel 643e/ ark bronze painted Stainless steel SP313 or other colors, consult factory. 1-3/8 1-1/8 1-9/64 1-9/ /32 xterior hardware Pocket Pivot utout oor Portion L of oor 1-1/8 Jamb Portion 72 Ives rchitectural hardware products

79 Pivots Pocket pivot/hinge, power transfer, fire rated Non-load bearing omes standard with 28 gauge TW4. or additional electrical wiring applications, consult product support. Rated 50 V or 3.5 amps continuous or 16 amp pulse, maximum pulse 400 milliseconds ull mortise Recommended for use with 1-3/4" door thickness only Not recommended for doors larger than 4'0" X 8'0" Not recommended for wood frames llows door to open a full 90 Non-handed ertifications Meets NSI/HM UL Listed, 3 hour fire doors Made from 304 series stainless steel HM escription Substrate inish 600 Primer painted Stainless steel USP 629 right stainless Stainless steel US Satin stainless Stainless steel US right brass Stainless steel US3 646 Satin nickel Stainless steel US ged bronze Stainless steel 643e/ ark bronze painted Stainless steel SP313 or other colors, consult factory. 73 Pulls & plates 1-3/8 1-1/8 1-9/64 1-9/64 Pocket Pivot utout 5-17/32 oor Portion L of oor 1-1/8 Jamb Portion xterior hardware Ives rchitectural hardware products 73

80 Notes xterior hardware Pulls & plates Ives rchitectural hardware products

81 Pulls & plates Table of contents rchitectural pulls and pushbars - heavy duty, solid construction eneral information...2 Pull mounting hardware Thru-bolt mounts...5 oncealed mounts...6 ack to back mounts... 7 Push/Pull combo mounts...8 rchitectural and decorative pulls How to order:...9 rchitectural pulls and push bars 8102H Solid door pull - 3/4" round H Solid door pull - 1" round ZH Solid door pull - 1" round Large 2-1/2" clearance for the accessibility applications Solid door pull - 1" flattened ZH 45 Offset solid door pull H 90 Offset solid door pull ZH 90 Offset solid door pull H Solid push bar ZH Solid straight pull/push bar combo (8103ZH Pull H Push) ZH 45 Offset pull/push bar combo (8145H pull H push) H Solid 90 Offset pull/push bar combo (8190H pull H push) ZH Solid 90 Offset pull/push bar combo (8190ZH pull H push)...22 ecorative pulls Solid door pull Solid door pull Solid door pull Style (tubular series) offset solid door pull eorgian 90 offset solid door pull thens offset tubular door pull eorgian straight solid door pull Plymouth offset solid door pull Plymouth offset solid door pull ddison flat tip straight solid door pull amelot steeple tip straight tubular door pull rookshire acorn tip straight tubular door pull reenwich arc straight solid door pull reenwich arc offset solid door pull Latitude straight solid door pull Rhodes straight solid door pull...37 Long door pulls How to order: Offset long door pull, rounded tip Straight long door pull, rounded tip Push and pull plates How to order: Push plate Pull plate, prep for pull (less pull) Pull plate Pull plate Pull plate Pull plate Protection plates 8400 ommercial protection plates UL ommercial protection plates...47 Vandal resistant trim VR810-T with black grip VR814-T without black grip VR810-NL LHR with black grip VR810-NL RHR with black grip VR814-NL LHR without black grip VR814-NL RHR without black grip VR810-NL-V with black grip VR814-NL-V without black grip VR900 RHR with black grip VR900 LHR with black grip VR904 RHR without black grip VR904 LHR without black grip VR900LLP RH with black grip...52 VR900LLP LH with black grip...52 VR904LLP RH without black grip...52 VR904LLP LH without black grip...52 VR910-T with black grip...53 VR914-T without black grip...53 VR910-NL with black grip VR914-NL without black grip VR910M-T with black grip VR914M-T without black grip VR910M-NL RHR with black grip VR910M-NL LHR with black grip VR914M-NL RHR without black grip VR914M-NL LHR without black grip lush pulls 22 lush pull - rectangle lush pull - small circle lush pull - large circle lush pull - rectangle lush pull - oval lush pull - deep well ecorative flush pulls 919 ecorative flush pull - oval ecorative flush pull - rectangle ecorative flush pull - square, deep well ecorative flush pull - rectangle, narrow ecorative flush pull - rectangle Sliding door pulls 230 Sliding door edge pull Pocket sliding door bolt Sliding door pull Sliding door pull - privacy Screen door pull 25 Screen door pull Pulls & plates xterior hardware Ives rchitectural hardware products 1

82 rchitectural pulls and pushbars - heavy duty, solid construction 2 Pulls & plates xterior hardware eneral information NSI ertified ll Ives architectural pulls, push bars, decorative pulls, and long door pulls meets NSI ompliant pulls (Z) ll Ives compliant pulls (reference local authority having jurisdiction) come with the Z designation. These pulls all have a door to pull clearance of 2.1/2" or greater. ll stainless steel Z pulls come standard with 316 Series Stainless which make them highly recommended for all external applications. Material ll architectural pulls, push bars and decorative pulls are made of heavy duty, solid bar stock or castings. ll long door pulls are made from tubular stock. vailable material substrates are below. See pull model detailed pages for material availability. Stainless Steel 304 Series Stainless Steel 316 Series (Standard for all Z pulls, Z push/pull combo, and long door pulls. vailable on 9100 series push bars as well.) rass luminum 6061-T6 lloy are and maintenance for stainless steel finishes Stainless steel requires periodic cleaning just as other materials do when in service. Stainless architectural building components, for instance, are subject to road salt spray at ground level and deposits from polluted urban air at higher levels. inger marks, deposits from tobacco smoke, stains from hard water or food left on to dry all detract from the original attractive appearance of stainless steel applications. leaning methods and the frequency with which there are employed vary considerably according to application. One of the outstanding features of stainless steel is the ease with which its fine appearance can be maintained. In many instances, only periodic warm water wash is sufficient to restore the original shine. In other cases, cleansing with a strong sterilizing solution may be required more frequently. etween these extremes are a broad range of cleaning requirements and methods. In all cases, there are some important do s and dont s that should be followed. o Wash regularly with warm water and mild soap detergent using a clean cloth or soft brush. Remove stubborn grime using recommended cleaners and methods. lways clean in the direction of the original polish lines. lways rinse after cleaning and wipe dry. on't on t use ordinary steel wool or other metal scrapers to remove stubborn dirt. on t allow dirt to accumulate. on t allow protective coatings to remain on new building components. Remove all traces of adhesive as well as plaster, terrazzo, paint and other construction splashes. on t use harsh, untested cleaners. Heavy duty ll Ives architectural pulls, push bars and long door pulls come standard with heavy duty (H) machining and mounting hardware to withstand high traffic and abuse applications which exceed industry standards. Many decorative pulls also come standard with heavy duty machining and hardware. Please see the list of pulls that come standard with heavy duty mounting hardware. 2 Ives rchitectural hardware products

83 rchitectural and decorative pulls eneral information - continued rchitectual Model Pulls sizes - center to center Long door pull Model Heavy duty machining / /8-16 Pull sizes are determined by the center to center distance between the mounting locations. x. 12" pull has 12" between the mounting locations. The overall pull length will be longer. See pull model detailed pages for specific size information. The table below shows standard available sizes for pulls /4" (8111 and 8112 Pulls Only), 5-3/4" (8121) 6 6" (8102H and 8105 Only) 8 8" (8102H, 8103H, 8103ZH, 8105, 8145ZH, 8190H, 8190ZH Only) 9 9" (8700 and 8800 Only) 0 10" (8102H, 8103H, 8103ZH, 8105, 8145ZH, 8169, 8190H, 8190ZH Only) 2 12" (8103H, 8103ZH, 8145ZH, 8169, 8181, 8190H, 8190ZH, 8281, 8312, 8371, 8372, 8373, 8700, 8800, 8848, 8975 Only) 16 16" (8181 and 8281 Only) 18 18" (8103ZH, 8145ZH, 8181, 8190H, 8190ZH, 8281, 8371, 8372, 8373, 8700, 8800 Only) /16" (8189 Only) 20 20" (8320 Only) Heavy duty machining 8102H 5/ H 3/ ZH 3/ ZH 3/ H 3/ ZH 3/ H 3/ ZH 3/ ZH 3/ H 3/ ZH 3/8-16 ecorative 24 24" (8371, 8372, 8373, 8700, 8800 Only) Model Heavy duty machining / / / / / / / / / / / / / Pulls & plates xterior hardware Ives rchitectural hardware products 3

84 rchitectural and decorative pulls 4 Pulls & plates eneral information - continued ustom lengths are available as engineering special, consult customer service. HM escription Substrate US 605 right rass rass US3 606 Satin rass rass US4 612 Satin ronze rass US Oil rubbed ronze rass US Satin Nickle rass US right hrome rass US Satin hrome rass US M* Satin hrome - nti-microbial rass US26-M 628 Satin luminium luminium US uff Stainless Stainless Steel US uff Stainless Substrate Stainless Steel -316 US Satin Stainless Steel Stainless Steel US Satin Stainless Substrate Stainless Steel -316 US M** Satin Stainless - nti-microbial Stainless Steel US32-M --- ged ronze Stainless Steel 643e/ Matte black Stainless Steel LK *M - ntimicrobial finish. The antimicrobial coating is specifically formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, blocking food and slowing the growth of bacteria, mold and mildew. Product with antimicrobial finishes will maintain the products standard warranty for finishes. High traffic, public use areas are ideally suited to antimicrobial coated door hardware. With hundreds or thousands of people accessing these areas every day, safety should be top of mind. dding door hardware with an antimicrobial coating can make a difference by inhibiting the growth of bacteria on these high-tough surfaces. pplications where antimicrobial coated hardware makes sense include: Healthcare ducation overnment ood service hildcare Rest rooms ** Recommend using 630-M nti-microbial for highly corrosive environmental applications ustom finishes are available as engineering special, consult customer service. oor thickness ll Ives architectural pulls, push bars, decorative pulls, and long door pulls come standard with mounting hardware for door thickness ranging from 1-1/2" to 1-3/4". Many pulls have optional mounting hardware for 2" and 2.1/4" thick doors or are available as separate part accessories. See detailed pull model pages for availability. Mounting hardware for other door thicknesses are available as engineering special, consult customer service. xterior hardware 4 Ives rchitectural hardware products

85 Pull mounting hardware Mounting sizes ll mounting hardware is for standard 1-3/4 door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. onsult ustomer Service. Thru-bolt mounts Standard mount Standard thru-bolt mount with countersunk washers Hollow metal and wood door applications (2) lat head mounting screws, plated to match (2) ountersunk washers, plated to match 5 Pulls & plates Pull Plate 3/4" Min. ia. Pull Plate Mount - ountersunk holes Used with countersunk holes in doors Wood door applications (2) lat head mounting screws, plated to match O Mount - ecorative ecorative thru-bolt mount Hollow metal and wood door applications (2) ecorative mounting bolts - machine screw, plated to match 1" Min. ia. Push Side Q Mount - ecorative, glass doors ecorative thru-bolt mount lass door applications (2) ecorative mounting bolts - machine screw, plated to match (2) Metal and vinyl washers xterior hardware X Mount - Security Security thru-bolt mount with countersunk washers Hollow metal and wood door applications (2) lat head security pin in socket mounting screws, plated to match (2) ountersunk washers, plated to match Ives rchitectural hardware products 5

86 Pull mounting methods Mounting sizes ll mounting hardware is for standard 1-3/4 door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. onsult ustomer Service. oncealed mounts 6 Pulls & plates Reinforcing Plate (1)Set screw Pull Plate Mount - luminum doors oncealed mount luminum door applications (2) Mounting bolts - machine screw (2) Set screws esigned to be used with rivet nuts. Not supplied. Mount - Pull plate oncealed mount with pull plate Hollow metal and wood door applications Pull mounts directly onto plate, Plate is attached to door (2) lat head mounting screws Reinforcing Plate (1)Set screw I Mount - Wood doors oncealed mount Wood door applications (2) Mounting bolts - machine screw (2) Set screws xterior hardware Reinforcing Plate (1)Set screw L Mount - Hollow metal doors oncealed mount Hollow metal door applications (2) Mounting bolts - machine screw (2) Set screws 6 Ives rchitectural hardware products

87 Pull mounting methods Mounting sizes ll mounting hardware is for standard 1-3/4 door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. onsult ustomer Service. ack to back mounts 3/4" Min. ia. 3/4" Min. ia. Push Side (1)Set screw Pull Side J Mount Pull only ack to back mounting - 5/16-18 hardware Hollow metal and wood door applications (2) Mounting bolts - machine screw (2) Set screws 7 Pulls & plates K Mount Pull only ack to back mounting hardware Hollow metal and wood door applications (8) Machine screws (4) Mounting sleeves Push Side Push Side 1" ia. 1" ia. (1)Set screw 1" Min. ia. 1" Min. ia. (1)Set screw Pull Side Pull Side N Mount ack to back mounting - 3/8-16 hardware Hollow metal and wood door applications (2) Mounting bolts - machine screw (2) Set screws P Mount - lass doors ack to back mounting - 3/8-16 hardware lass door applications (2) Mounting bolts - machine screw (2) Set screws (2) Metal and vinyl washers xterior hardware Ives rchitectural hardware products 7

88 Pull mounting methods Mounting ll mounting hardware is for standard 1-3/4 door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. onsult ustomer Service. Push/Pull combo mounts 8 Pulls & plates N Mount O Mount N Mount ST Mount O Mount ST Mount NO Mount - ecorative ack to back mounting - 3/8-16 hardware (N) & ecorative thru-bolt (O) Hollow metal and wood door applications Pushbar to pull (1) Mounting bolt - machine screw (1) Set screw ree end pushbar and pull (2) ecorative mounting bolts - machine screw, plated to match NS Mount - Standard ack to back mounting - 3/8-16 hardware (N) & Standard thru-bolt Hollow metal and wood door applications Pushbar to Pull (1) Mounting bolt - machine screw (1) Set screw ree end pushbar and pull (2) lat head mounting screws, plated to match (2) ountersunk washers, plated to match xterior hardware P Mount Q Mount Q Mount PQ Mount - ecorative, glass doors ack to back mounting - 3/8-16 hardware (P) & ecorative thru-bolt (Q) lass door applications Pushbar to pull (1) Mounting bolt - machine screw (1) Set screw (1) Metal and vinyl washers ree end pushbar and pull (2) ecorative mounting bolts - machine screw, plated to match (2) Metal and vinyl washers 8 Ives rchitectural hardware products

89 rchitectural and decorative pulls How to order: Single/Pair lank Single pull machined with standard threads PR Pair of pulls - One pull machined with standard threads and one pull machined for back to back mounting Jsgl Single pull machined for back to back mounting (8102 only) Nsgl Single pull machined for back to back mounting Qsgl Single pull machined for back to back mounting (glass doors) Model 8102H Straight pull - 3/4" round 8103H Straight pull - 1" round 8103ZH Straight pull - 1" round, compliant 8105 Straight Pull - 1" lattened 8145ZH 45 Offset pull - 1" round, compliant 8190H 90 Offset pull - 1" round 8190ZH 90 Offset pull - 1" round, compliant 8111 Straight pull 8112 Straight pull - surface mount 8121 Straight pull - surface mount 8169 Offset Tubular pull 8181 Offset eorgian pull 8189 Straight thens pull 8281 Straight eorgian pull 8312 Offset Plymouth pull 8320 Offset Plymouth pull 8371 Straight ddison pull 8372 Straight amelot pull 8373 Straight rookshire pull 8376 Straight rookshire pull 8700 Straight reenwich pull 8800 Offset reenwich pull 8848 Straight pull 8975 Straight Rhodes pull enter to center 5 5-1/4" (8111), 5-5/8" (8112), 5-3/4" (8121) 6 6" (8102H and 8105 only) 8 8" (8102H, 8103H, 8103ZH, 8105, 8145ZH, 8190H, 8190ZH only) 9 9" (8700 and 8800 Only) 0 10" (8102H, 8103H, 8103ZH, 8105, 8145ZH, 8169, 8190H, 8190ZH only) 2 12" (8103H, 8103ZH, 8145ZH, 8169, 8181, 8190H, 8190ZH, 8281, 8312, 8371, 8372, 8373, 8700, 8800, 8848, 8975 only) 16 16" (8181 and 8281 only) 18 18" (8103ZH, 8145ZH, 8181, 8190H, 8190ZH, 8281, 8371, 8372, 8373, 8700, 8800 only) 19 19" (8189 only) 20 20" (8320 only) 24 24" (8371, 8372, 8373, 8700, 8800 only) inish 605 uff rass US3 606 Satin rass US4 612 Satin ronze US ntique ronze US Satin Nickel US uff hrome US Satin hrome US M Satin hrome - nti-microbial US260-M 628 Satin lear nodized US uff Stainless US uff Stainless Substrate US Satin Stainless US Satin Stainless Substrate US M Satin Stainless - nti-microbial US32-M 643e/716 ged ronze --- LK Matte black --- PR8190ZH-8 US32 O 1-3/4" Single/Pair Model enter to center inish Mounting oor thickness PR 8190ZH 8 US32 N 1-3/4" 9 Pulls & plates xterior hardware Ives rchitectural hardware products 9

90 rchitectural and decorative pulls 10 Pulls & plates How to order - continued: PR8190ZH-8 US32 O 1-3/4" Single/Pair Model enter to center inish Mounting oor thickness Mounting Hardware ST Thru-bolt with decorative washer oncealed mount - aluminum doors Thru-bolt with countersunk hole oncealed mount with pull plates I oncealed mount - wood doors J ack to back mount (8102 only) K ack to back mount (8121 only) L oncealed mount - hollow metal doors N ack to back mount O ecorative thru-bolt P ack to back mount - glass doors Q ecorative thru-bolt - glass doors X Thru-bolt - security screw and decorative washer oor Thickness 1-3/4" Standard 2" Optional 2-1/4" Optional PR 8190ZH 8 US32 N 1-3/4" xterior hardware 10 Ives rchitectural hardware products

91 xterior hardware rchitectural pulls and push bars 8102H Solid door pull - 3/4" round vailable Sizes: 6", 8", 10" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, J, L Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 11 Pulls & plates 3/4" ROUN Product number Projection learance enter to center Overall length 8102H-6 2-1/4" 1-1/2" 6" 6-3/4" 8102H-8 2-1/4" 1-1/2" 8" 8-3/4" 8102H-0 2-1/4" 1-1/2" 10" 10-3/4" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 629, 630, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Jsgl ustom lengths are available as engineering special, consult customer service. Ives rchitectural hardware products 11

92 rchitectural pulls and push bars 12 Pulls & plates 8103H Solid door pull - 1" round vailable Sizes: 8", 10", 12" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),,, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 1" ROUN Product number Projection learance enter to center Overall length 8103H-8 2-1/2" 1-1/2" 8" 9" 8103H-0 2-1/2 1-1/2" 10" 11" 8103H-2 2-1/2 1-1/2" 12" 13" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 629, 630, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. xterior hardware 12 Ives rchitectural hardware products

93 xterior hardware rchitectural pulls and push bars 8103ZH Solid door pull - 1" round Large 2-1/2" clearance for the accessibility applications vailable Sizes: 8", 10", 12" ertifications Meets NSI omplies with and barrier free applications Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 2-1/2" LRN 1" ROUN Product number Projection learance enter to center Overall length 8103ZH-8 3-1/2" 2-1/2 8" 9" 8103ZH-0 3-1/2 2-1/2 10" 11" 8103ZH-2 3-1/2 2-1/2 12" 13" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, , , 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. 13 Pulls & plates Ives rchitectural hardware products 13

94 rchitectural pulls and push bars 14 Pulls & plates 8105 Solid door pull - 1" flattened vailable Sizes: 8", 10", 12" ertifications Meets NSI Mounting 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 1 LTT 1/2 ROUN Product number Projection learance enter to center Overall length " 1-1/2 6" 6-1/2" /2 8" 8-1/2" /2 10" 10-1/2" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 629, 630, 630-M,643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl pr Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. xterior hardware 14 Ives rchitectural hardware products

95 xterior hardware rchitectural pulls and push bars 1" ROUN 8145ZH 45 Offset solid door pull vailable Sizes: 8", 10", 12", 18" ertifications Meets NSI omplies with and arrier ree pplications Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection learance enter to center Overall length Offset "" 8145ZH-8 3-1/2" 2-1/2 8" 9" 2-1/2" 8145ZH-0 3-1/2" 2-1/2 10" 11" 2-1/2" 8145ZH-2 3-1/2" 2-1/2 12" 13" 2-1/2" 8145ZH /2" 2-1/ /2" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, , , 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. 15 Pulls & plates Ives rchitectural hardware products 15

96 rchitectural pulls and push bars 16 Pulls & plates 8190H 90 Offset solid door pull vailable Sizes: 8", 10", 12", 18" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 1" ROUN Product number Projection learance enter to center Overall length Offset "" 8190H-8 3-1/4" 2-1/4 8" 9" 3-1/4" 8190H-0 3-1/4" 2-1/4 10" 11" 3-1/4" 8190H-2 3-1/4" 2-1/4 12" 13" 3-1/4" 8190H /4" 2-1/ /4" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 629, 630, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. xterior hardware 16 Ives rchitectural hardware products

97 xterior hardware rchitectural pulls and push bars 8190ZH 90 Offset solid door pull vailable Sizes: 8, 10", 12", 18" ertifications Meets NSI omplies with and arrier ree pplications Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 17 Pulls & plates 1" ROUN Product number Projection learance enter to center Overall length Offset "" 8190ZH-8 3-1/2" 2-1/2 8" 9" 3-1/4" 8190ZH-0 3-1/2" 2-1/2 10" 11" 3-1/4" 8190ZH-2 3-1/2" 2-1/2 12" 13" 3-1/4" 8190ZH /2" 2-1/ /4" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, , , 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. Ives rchitectural hardware products 17

98 rchitectural pulls and push bars 18 Pulls & plates 1 ROUN 9100H Solid push bar vailable in standard lengths of 28 and 33. lso available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, NO, NS, O, P, PQ, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Projection "" learance enter to center Overall length 2-1/2" 1-1/2" 25-45" dd 1" to T length vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. vailable in 316 Series Stainless Steel, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 629, , 630, , 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of push bars for back to back mounting or one back to back machined push bar, specify Nsgl or Psgl (glass doors) aution The length of push bar should not interfere with the door jamb or cause a pinch point xterior hardware 18 Ives rchitectural hardware products

99 rchitectural pulls and push bars 1" ROUN 9103ZH Solid straight pull/push bar combo (8103ZH Pull H Push) vailable in standard lengths of 28 and 33. lso available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. ertifications Meets NSI Pull Side complies with and arrier ree pplications Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) NO, NS, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number T Push T Pull Projection Push & Pull 9103ZH 25 to 45" 8" 2-1/2" & 3-1/2" 9103ZH 25 to 45" 10" 2-1/2" & 3-1/2" 9103ZH 25 to 45" 12" 2-1/2" & 3-1/2" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, , , 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. aution The length of push bar should not interfere with the door jamb or cause a pinch point 19 Pulls & plates xterior hardware Ives rchitectural hardware products 19

100 rchitectural pulls and push bars 20 Pulls & plates 1" ROUN 9145ZH 45 Offset pull/push bar combo (8145H pull H push) vailable in standard lengths of 28 and 33. lso available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. ertifications Meets NSI Pull Side complies with and arrier ree pplications Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) NO, NS, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number T Push T Pull Projection Push & Pull 9145ZH 25 to 45" 8" 2-1/2" & 3-1/2" 9145ZH 25 to 45" 10" 2-1/2" & 3-1/2" 9145ZH 25 to 45" 12" 2-1/2" & 3-1/2" 9145ZH 25 to 45" 18" 2-1/2" & 3-1/2" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, , , 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. aution The length of push bar should not interfere with the door jamb or cause a pinch point xterior hardware 20 Ives rchitectural hardware products

101 rchitectural pulls and push bars 1" ROUN 9190H Solid 90 Offset pull/push bar combo (8190H pull H push) vailable in standard lengths of 28 and 33. lso available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes Standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) NO, NS, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number T Push T Pull Projection push & pull 9190ZH 25 to 45" 8" 2-1/2" & 3-1/2" 9190ZH 25 to 45" 10" 2-1/2" & 3-1/2" 9190ZH 25 to 45" 12" 2-1/2" & 3-1/2" 9190ZH 25 to 45" 18" 2-1/2" & 3-1/2" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 629, 630, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. aution The length of push bar should not interfere with the door jamb or cause a pinch point 21 Pulls & plates xterior hardware Ives rchitectural hardware products 21

102 rchitectural pulls and push bars 22 Pulls & plates 1" ROUN 9190ZH Solid 90 Offset pull/push bar combo (8190ZH pull H push) vailable in standard lengths of 28 and 33. lso available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. ertifications Meets NSI Pull Side complies with and arrier ree pplications Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) NO, NS, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number T Push T Pull Projection push & pull 9190ZH 25 to 45" 8" 2-1/2" & 3-1/2" 9190ZH 25 to 45" 10" 2-1/2" & 3-1/2" 9190ZH 25 to 45" 12" 2-1/2" & 3-1/2" 9190ZH 25 to 45" 18" 2-1/2" & 3-1/2" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, , , 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. aution The length of push bar should not interfere with the door jamb or cause a pinch point xterior hardware 22 Ives rchitectural hardware products

103 ecorative pulls 1" ROUN S Solid door pull Sizes: 5 1/4" ertifications Meets NSI Mounting 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes Standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details), Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection learance enter to center Overall length /16" 1-3/16 5-1/4" 6-1/4" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 629, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. 23 Pulls & plates 1-7/8" SUR MOUNT Solid door pull Sizes: 5-1/4" ertifications Meets NSI Mounting 8 x 1" wood screws Surface mount only Product number Projection learance enter to center Overall length /16" 1-7/16 5-5/8" 7-1/2" vailable in rass substrate. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 626, 626-M ustom finishes are available as engineering special, consult customer service. xterior hardware Ives rchitectural hardware products 23

104 ecorative pulls 24 Pulls & plates 1-1/2 HOSPITL 8121 Solid door pull Sizes: 5-3/4" ertifications Meets NSI Mounting 8-32 x 1" machine screw and #8 x 1" wood screw Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional mounting hardware available (see general information section for details) K Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection learance enter to center Overall length /2" 1-7/16 5-3/4" 8-3/4" vailable in rass substrate. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 626, 626-M ustom finishes are available as engineering special, consult customer service. xterior hardware 24 Ives rchitectural hardware products

105 xterior hardware ecorative pulls 8169 Style (tubular series) offset solid door pull 1" iameter pull bar vailable Sizes: 10", 12" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 25 Pulls & plates 1" ROUN Product number Projection learance Offset enter to center Overall length " 2" 6-1/2" " 2" 6-1/2" vailable in rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. Ives rchitectural hardware products 25

106 ecorative pulls 8181 eorgian 90 offset solid door pull 1" Round pull (rip rea 1.1/4") vailable sizes: 12", 16", 18" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 26 Pulls & plates 2" Product number Projection learance Offset "" enter to center Overall length /8" 1-7/8" 4" 12" 12-3/4" /8" 1-7/8" 4" 16" 16-3/4" /8" 1-7/8" 4" 18" 18-3/4" vailable in luminum, rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 628, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. xterior hardware 26 Ives rchitectural hardware products

107 xterior hardware ecorative pulls 8189 thens offset tubular door pull 1-1/4" iameter pull bar with 1-1/4" iameter mounting posts vailable sizes: 19 3/16" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 27 Pulls & plates 3" 1-3/8" Product number Projection learance Offset "" enter to center Overall length /8" 1-3/8" 1-1/2" 19-13/16" 29.5" vailable in rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. Ives rchitectural hardware products 27

108 ecorative pulls 8281 eorgian straight solid door pull 1" Round pull (grip area 1.1/4") vailable sizes: 12", 16", 18" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 28 Pulls & plates 1-1/4" 1" 1-7/8" Product number Projection learance enter to center Overall length /8" 1-7/8" 12" 12-3/4" /8" 1-7/8" 16" 16-3/4" /8" 1-7/8" 18" 18-3/4" vailable in luminum, rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 628, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Qsgl (glass doors) ustom lengths are available as engineering special, consult customer service. xterior hardware 28 Ives rchitectural hardware products

109 xterior hardware ecorative pulls 8312 Plymouth offset solid door pull 1-7/16" Max grip diameter vailable Sizes: 12" ertifications Meets NSI /8" 2" 1-7/8" 5/8" 3/4" 1-7/16" 1-3/16" Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection learance Offset "" enter to center Overall length " 1-9/16" 1-1/2" 12" 14" vailable in rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. 29 Pulls & plates dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. Ives rchitectural hardware products 29

110 ecorative pulls 30 Pulls & plates 3/4" 1-1/4" 1-1/4" 4-5/8" 8320 Plymouth offset solid door pull 1-1/4" Max grip diameter vailable Sizes: 20" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection learance Offset "" enter to center Overall length /8" 2-5/8" 2-7/8" 20" 22" vailable in rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. xterior hardware 30 Ives rchitectural hardware products

111 xterior hardware ecorative pulls 8371 ddison flat tip straight solid door pull 1" Round pull with 1-1/4" base mounting posts vailable sizes: 12", 18", 24" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16" mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 31 Pulls & plates 1" 2" Product number Projection learance enter to center Overall length /16" 2" 12" 16" /16" 2" 18" 22" /16" 2" 24" 28" vailable in rass substrate. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. Ives rchitectural hardware products 31

112 ecorative pulls 8372 amelot steeple tip straight tubular door pull 1" Round pull with 2" base mounting posts vailable sizes: 12", 18", 24" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details), I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 32 Pulls & plates 1" 1-7/8" Product number Projection learance enter to center Overall length /8" 1-7/8" 12" 17" /8" 1-7/8" 18" 23" /8" 1-7/8" 24" 29" vailable in rass substrate. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Jsgl ustom lengths are available as engineering special, consult customer service. xterior hardware 32 Ives rchitectural hardware products

113 xterior hardware ecorative pulls 8373 rookshire acorn tip straight tubular door pull 1" Round pull with 2" base mounting posts vailable sizes: 12", 18", 24" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details), I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 33 Pulls & plates 1" ia. 1-7/8" Product number Projection learance enter to center Overall length " 1-7/8" 12" 16-5/16" " 1-7/8" 18" 22-5/16" " 1-7/8" 24" 28-5/16" vailable in rass substrate. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Jsgl ustom lengths are available as engineering special, consult customer service. Ives rchitectural hardware products 33

114 ecorative pulls 8700 reenwich arc straight solid door pull 3/4" Round pull vailable sizes: 9", 12", 18", 24" ertifications Meets NSI Pulls & plates Mounting 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details), I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection learance enter to center Overall length 1" I 1-3/8" /8" 1-5/8" 9" 12-9/16" /8" 1-5/8" 12" 15-9/16" /8" 1-5/8" 18" 21-9/16" /8" 1-5/8" 24" 27-9/16" vailable in rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Jsgl ustom lengths are available as engineering special, consult customer service. xterior hardware 34 Ives rchitectural hardware products

115 ecorative pulls 8800 reenwich arc offset solid door pull 3/4" Round pull vailable sizes: 9", 12", 18", 24" ertifications Meets NSI Mounting 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details), I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 35 Pulls & plates 3/4" I Product number Projection learance Offset "" enter to center Overall length /8" 1-3/8" 1" 9" 12-9/16" /8" 1-3/8" 1" 12" 15-9/16" /8" 1-3/8" 1" 18" 21-9/16" /8" 1-3/8" 1" 24" 27-9/16" vailable in rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Jsgl ustom lengths are available as engineering special, consult customer service. xterior hardware Ives rchitectural hardware products 35

116 ecorative pulls 8848 Latitude straight solid door pull 1" Round pull with 2" Round black mounting posts vailable sizes: 12" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 36 Pulls & plates 2" 2" Product number Projection learance enter to center Overall length /2" 1-1/2" 12" 17" vailable in rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, LK ustom finishes are available as engineering special, consult customer service. 1" dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl or Psgl (glass doors) ustom lengths are available as engineering special, consult customer service. xterior hardware 36 Ives rchitectural hardware products

117 xterior hardware ecorative pulls 8975 Rhodes straight solid door pull 1-1/4" X 1/2" lat pull with 3/4" round mounting posts vailable sizes: 12" ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. ccessory package available for 2" and 2-1/4" thick doors omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details), I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 1-1/4" 1/2" 37 Pulls & plates Product number Projection learance enter to center Overall length /4" 1-3/4" 12" 18" vailable in luminum substrate. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 628 ustom finishes are available as engineering special, consult customer service. 1-3/4" dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Jsgl (glass doors) ustom lengths are available as engineering special, consult customer service. Ives rchitectural hardware products 37

118 Long door pulls 38 Pulls & plates xterior hardware How to order: Single/Pair lank PR Nsgl Qsgl Single pull machined with standard threads Pair of pulls - One pull machined with standard threads and one pull machined for back to back mounting Single pull machined for back to back mounting Single pull machined for back to back mounting (glass doors) Model 9264 Offset long door pull, rounded tips 9264 Offset long door pull, flat tips 9266 Straight long door pull, rounded tips 9266 Straight long door pull, flat tips Length 12 12" 18 18" 24 24" 36 36" 72 72" enter to enter 8 8" 12 12" 18 18" 20 20" 56 56" inish 605 uff rass US3 606 Satin rass US4 613 ntique ronze US Satin Nickel US uff Stainless Substrate US Satin Stainless Substrate US e/716 ged ronze --- LK Matte black --- Mounting hardware ST Thru-bolt with decorative washer oncealed mount - aluminum doors I oncealed mount - wood doors L oncealed mount - hollow metal doors N ack to back mount O ecorative thru-bolt P ack to back mount - glass doors Q ecorative thru-bolt - glass doors X Thru-bolt - security screw and decorative washer M dditional mounting bracket (centered) oor thickness 1-3/4" Standard 2" Optional 2-1/4" Optional PR US32 P 1/2" Single/Pair Model Length enter to center inish Mounting oor thickness PR US32 P 1/2" 38 Ives rchitectural hardware products

119 Long door pulls 9266 Straight long door pull 9264 Offset long door pull, rounded tip 9266 Straight long door pull, rounded tip 1-1/4" iameter tubular bar Round tip is standard Optional flat Tip () is available. Specify after model number when ordering. vailable in whole 1" increments from 12" to 96" Other lengths available as engineering special, consult customer service. ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details), I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard lengths Product number Projection learance Offset Overall Length T /4" 1-1/2" 3-5/8" 72" 56" /4" 1-1/2" 3-5/8" 36" 20" /4" 1-1/2" 3-5/8" 24" 18" /4" 1-1/2" 3-5/8" 18" 12" /4" 1-1/2" 3-5/8" 12" 8" /4" 1-1/2" 72" 56" /4" 1-1/2" 36" 20" /4" 1-1/2" 24" 18" /4" 1-1/2" 18" 12" /4" 1-1/2" 12" 8" 39 Pulls & plates 9624 Offset bracket Round tip (Standard) lat tip ( Option) Note: middle position bracket is required for pulls over 8 feet. vailable in rass and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 613, 619, , , 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information If not specified, standard center to center length for pulls 36" or longer is 16" less than total pull length (8" from each end of the pull). enter to center length must be specified for lengths less than 36". x. 72" Long pull has a 56" enter to enter If the center to center length is less than half the total pull length, consult customer service. Specify PR when ordering a set of push bars for back to back mounting or one back to back machined push bar, specify Nsgl or Psgl (glass doors) dditional mounting post required for lengths greater than 96". Mid posts are optional for other lengths. Specify mid post location when ordering. aution Recommend the length of the ladder pull should not exceed 4" less than the door height xterior hardware Ives rchitectural hardware products 39

120 Push and pull plates 40 Pulls & plates xterior hardware How to order: Single/Pair lank PR Nsgl Model Single pull machined with standard threads Pair of pulls and plates - One pull machined with standard threads and one pull machined for back to back mounting Single pull machined for back to back mounting 8200 Push Plate 8300 Pull plate (less pull) 8302 Pull plate (with 8102 pull) 8303 Pull plate (with 8103 pull) 8305 Pull plate (with 8105 pull) 8311 Pull plate (with 8111 pull) Pull center to center 5 5-1/4" (8111 only) 6 6" (8102H and 8105 only) 8 8" (8102H, 8103H, 8105 only) 0 10" (8102H, 8103H, 8105 only) 2 12" (8103H only) inish 605 uff rass US3 606 Satin rass US4 612 Satin ronze US ntique ronze US Satin Nickel US uff hrome US Satin hrome US M Satin hrome - nti-microbial US260-M 628 Satin lear nodized US uff Stainless US Satin Stainless US M Satin Stainless - nti-microbial US32-M 643e/716 ged ronze --- LK Matte black --- Plate width x height 3X12 3" Wide X 12" High 3.5X15 3-1/2" Wide X 15" High 4X16 4" Wide X 16" High 6X16 6" Wide X 16" High 8X16 8" Wide X 16" High Mounting hardware ST Thru-bolt with decorative washer oncealed mount - aluminum doors Thru-bolt with countersunk hole oncealed mount with pull plates I oncealed mount - wood doors J ack to back mount (8102 only) L oncealed mount - hollow metal doors N ack to back mount oor thickness 1-3/4" Standard 2" Optional 2-1/4" Optional PR US32 4X16 N 1-3/4" Single/Pair Model enter to center inish Plate W X H Mounting oor thickness PR US32 4 X 16 N 1-3/4" 40 Ives rchitectural hardware products

121 Push and pull plates or plates up to 4" 2 2 T or plates greater than 4" (RH shown) T 8200 Push plate 8300 Pull plate, prep for pull (less pull) ertifications Meets NSI for J301 Materials Mounting Standard mounting package #6X5/8 oval head screws Optional TK/TORX package #6X5/8 Self-drilling, Self-tapping screws #6X5/8 Torx screws Widths and heights 3" X 12" 3-1/2" X 15" 4" X 16" 6" X 16" 8" X 16" Optional pull center to center spacing or 8300 pull plates, plates are prepped with 2 3/8" holes for pull machining or holes prepped for mounting hardware, consult customer service. 5-1/ vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 630, 630-M, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of plates for back to back mounting ustom widths, heights, and special cut-outs are available as engineering special, consult customer service. Plates cut for cylinder or thumbturns Plates are available with cutout for cylinder or thumbturn; standard cutout is 2 from top and centered on plates up to 4 wide. or plates wider than 4 cutout is located 2 from outer edge, specify LH or RH. When pull location interferes with standard cutout location a detail drawing should be furnished with the order. Standard cutout is 1-1/4 for cylinder and 3/8 for thumbturn. Specify for cutout for cylinder or T for cutout for thumbturn. 41 Pulls & plates xterior hardware Ives rchitectural hardware products 41

122 Push and pull plates 42 Pulls & plates 3/4" ROUN 8302 Pull plate ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),, I, J, L Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate #6 X 5/8 oval head screws Optional TK/TORX package #6 X 5/8 Self-drilling, Self-tapping screws and #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 6", 8", or 10" center to center Widths and heights 3-1/2" X 15" 4" X 16" 6" X 16 Pull center to center 6" 8" 10" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 630, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Jsgl ustom widths, heights, and special cut-outs are available as engineering special, consult customer service. xterior hardware 42 Ives rchitectural hardware products

123 Push and pull plates 1" ROUN 8303 Pull plate ertifications Meets NSI Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details),,, I, L, N Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate #6 X 5/8 oval head screws Optional TK/TORX package #6 X 5/8 Self-drilling, Self-tapping screws and #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 8" or 10" center to center Widths and heights 3-1/2" X 15" 4" X 16" 6" X 16" Pull center to center 8" 10" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 630, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl ustom widths, heights, and special cut-outs are available as engineering special, consult customer service. 43 Pulls & plates xterior hardware Ives rchitectural hardware products 43

124 Push and pull plates 44 Pulls & plates 1 LTT 1/2 ROUN 8305 Pull plate ertifications Meets NSI Mounting 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate #6 X 5/8 oval head screws Optional TK/TORX package #6 X 5/8 Self-drilling, Self-tapping screws and #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 6", 8", or 10" center to center Widths and heights 3-1/2" X 15" 4" X 16" 6" X 16" Pull center to center 6" 8" 10" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 630, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting or one back to back machined pull, specify Nsgl ustom widths, heights, and special cut-outs are available as engineering special, consult customer service. xterior hardware 44 Ives rchitectural hardware products

125 xterior hardware Push and pull plates 1 ROUN S 8311 Pull plate ertifications Meets NSI Mounting 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. omes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details), Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate #6 X 5/8 oval head screws Optional TK/TORX package #6 X 5/8 Self-drilling, Self-tapping screws and #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 5-1/4" center to center Widths and heights 3-1/2" X 15" 4" X 16" 6" X 16" Pull center to center 5-1/4" vailable in luminum, rass, and Stainless Steel substrates. See general information section for specific HM finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-M, 628, 630, 630-M, 643e/716, LK ustom finishes are available as engineering special, consult customer service. dditional information Specify PR when ordering a set of pulls for back to back mounting ustom widths, heights, and special cut-outs are available as engineering special, consult customer service. 45 Pulls & plates Ives rchitectural hardware products 45

126 Protection plates Types of protection plates Mop plates Protect the bottom of the pull side of door subject to cleaning and mopping procedures. Size Ranges: 4 to 6 high, 22 to 48 wide 46 Pulls & plates Kick plates Protect the bottom of the push side of doors subject to scuffing from foot traffic. Recommended for all doors subject to normal use (especially doors using a closer). Size Ranges: 8 to 24 high, 22 to 48 wide Stretcher plates Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment. Usually applied to push side of doors. Specify 4 Option for beveled edges. Size Ranges: 6 to 8 high, 22 to 48 wide rmor plates Protect lower half of doors from abuse by hard carts, trucks and rough usage. Usually applied to push side of single doors and both sides of double acting doors. Size Ranges: 26 to 48 high, 22 to 48 wide xterior hardware 46 Ives rchitectural hardware products

127 Protection plates 8400 ommercial protection plates 8402 UL ommercial protection plates oor protection plates are available in.050" thick brass, stainless steel or aluminum; and 1/8" thick high impact polyethylene in clear or black. ll plates, metal and plastic, come standard with four beveled edges and countersunk mounting holes (-S). Protection plates must be ordered in 1/2" increments. vailable in other sizes, consult customer service or 8402 UL Plates, UL mark appears in upper right corner. Not available on plastic protection plates. ertifications Meets NSI for J301 UL protection plates certified to UL10 Mounting Standard mounting package, 16 per pack #6 X 5/8 oval head screws Optional TK/TORX package, specify TK-TX #6 X 5/8 Self-drilling, Self-tapping screws #6 X 5/8 Torx screws luminum 5005 Series, rass Series, Stainless Steel 300 Series, Plastic HM escription Substrate inish Max sizes 605 right rass rass US3 24"X48" 606 Satin rass rass US4 24"X48" 612 Satin ronze rass US10 24"X48" 613 Oil rubbed ronze rass US10 36"X48" 619 Satin Nickel rass US15 24"X48" 625 right hrome rass US26 36"X48" 626 Satin hrome rass US26 24"X48" 628 Satin luminium luminium US28 48"X48" 629 right Stainless Steel Stainless Steel US32 48"X48" 630 Satin Stainless Steel Stainless Steel US32 48"X48" 654 Satin Stainless Steel Stainless Steel US32 48"X48" LK Matte black Stainless Steel LK 24"X48" P-LK lack Plastic P-LK 48"X48" LR lear Plastic LR 48"X48" Number of screw packs required by plate size (specify TK Screws or TORK screws) ustom finishes are available as engineering special, consult customer service. vailable options Specify -NH for no mounting holes. (Not available on vailable only with US32, US32, US3, US4, US28, lear, lack only) Specify -NH for no mounting holes with adhesive. Specify RS prepped with extra row of screws. Special ut-outs are available as engineering special, consult customer service. vailable accessory asket tape kit tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation. One tape pack will cover an the perimeters of a 8" x 34" kickplate. Order 8401 gasket tape. 47 Pulls & plates xterior hardware Ives rchitectural hardware products 47

128 Vandal resistant trim VR810-T VR814-T with black grip without black grip Size 11 auge(0.120" thick) Mounting or door thickness 1-3/4-2-1/4" X 1" and X 1-1/2" mounting screw size. Product number Width Height Thru-bolt pattern (4 holes) learance grip to door Projection 48 Pulls & plates VR810 VR814 VR810T 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" vailable in Stainless Steel US Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. ustom finishes are available as engineering special, consult customer service. xterior hardware 48 Ives rchitectural hardware products

129 xterior hardware Vandal resistant trim VR810-NL LHR with black grip VR810-NL RHR with black grip VR814-NL LHR without black grip VR814-NL RHR without black grip Size 11 auge(0.120" thick) Mounting or door thickness 1-3/4-2-1/4" X 1" and X 1-1/2" mounting screw size Product number Width Height Thru-bolt pattern (4 holes) learance grip to door Projection VR810NL 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" vailable in Stainless steel US Series Stainless steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip ustom finishes are available as engineering special, consult customer service dditional information 1-5/8" cylinder hole cut-out, located 1-13/16 above horizontal center line and centered between mounting studs on vertical center line esigned for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Protective cylinder collar spins to reduce damage from pipe wrench or other tool omes with cylinder cup 49 Pulls & plates Ives rchitectural hardware products 49

130 Vandal resistant trim 50 Pulls & plates VR810-NL-V with black grip VR814-NL-V without black grip or use with alcon 25-R or 25-V Series exit devices Thru-bolts direct to the exit device Night latch operation (cylinder not furnished) Non-handed, horizontal keyway Size 11 auge(0.120" thick) Mounting or door thickness 1-3/4-2-1/4" X 1" and X 1-1/2" mounting screw size Product number Width Height Thru-bolt pattern (4 holes) learance grip to door Projection VR810NL-V 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" vailable in Stainless Steel US Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip ustom finishes are available as engineering special, consult customer service dditional information 1-5/8" cylinder hole cut-out, located 1-13/16 above horizontal center line and centered between mounting studs on vertical center line esigned for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Protective cylinder collar spins to reduce damage from pipe wrench or other tool. omes with cylinder cup xterior hardware 50 Ives rchitectural hardware products

131 xterior hardware Vandal resistant trim VR900 RHR with black grip VR900 LHR with black grip VR904 RHR without black grip VR904 LHR without black grip or use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and rose trim. uilt-in lock protector prevents tampering on certain models. Handed design allows trim to be positioned to coordinate with the centerline of inside hardware. Size 11 auge(0.120" thick) Mounting or door thickness 1-3/4-2-1/4". 1/4-20 X 1-1/4" and 1/4-20 X 1-3/4" mounting screws with countersunk washers Width Height Thru-bolt pattern (4 holes) learance grip to door Projection 7-1/4" 11" 2" wide x 10" high 1-1/2" 1-7/8" vailable in Stainless Steel US Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. ustom finishes are available as engineering special, consult customer service. dditional information 1-1/2" cylinder hole cut-out, located 2-7/32 above horizontal center Line and 1/4" offset from vertical center line towards the hinge side of the door. esigned for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied. Protective cylinder collar spins to reduce damage from pipe wrench or other tool. omes with cylinder cup dditional cut-outs and locations are available as engineering special, consult customer service. 51 Pulls & plates Ives rchitectural hardware products 51

132 Vandal resistant trim 52 Pulls & plates VR900LLP RH with black grip VR900LLP LH with black grip VR904LLP RH without black grip VR904LLP LH without black grip or use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and rose trim Handed design allows trim to be positioned to coordinate with the centerline of inside hardware Size 11 auge(0.120" thick) Mounting or door thickness 1-3/4-2-1/4". 1/4-20 X 1-1/4" and 1/4-20 X 1-3/4" mounting screws with countersunk washers Width Height Thru-bolt pattern (4 holes) learance grip to door Projection 5-1/4" 11" 1-3/4" wide x 10" high 1-1/2" 1-7/8" vailable in Stainless Steel US Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip ustom finishes are available as engineering special, consult customer service dditional information 1-1/2" cylinder hole cut-out, located 2-7/32 above Horizontal center line and 1/4" offset from vertical center line towards the hinge side of the door esigned for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied. Protective cylinder collar spins to reduce damage from pipe wrench or other tool omes with cylinder cup dditional cut-outs and locations are available as engineering special, consult customer service xterior hardware 52 Ives rchitectural hardware products

133 xterior hardware Vandal resistant trim VR910-T with black grip VR914-T without black grip or use with Von uprin 98/99 Series rim and vertical rod exit device Thru-bolts direct to the exit device Pull operation only Non-handed Size 11 auge (0.120" thick) Mounting or door thickness 1-3/4-2-1/4" X 1" and X 1-1/2" mounting screw size Width Height Thru-bolt pattern (4 holes) learance grip to door Projection 5-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" vailable in Stainless Steel US Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip ustom finishes are available as engineering special, consult customer service 53 Pulls & plates Ives rchitectural hardware products 53

134 Vandal resistant trim 54 Pulls & plates VR910-NL with black grip VR914-NL without black grip or use with Von uprin 98/99 Series rim and vertical rod exit device Thru-bolts direct to the exit device Non-handed, horizontal keyway Size 11 auge(0.120" thick) Mounting or door thickness 1-3/4-2-1/4" X 1" and X 1-1/2" mounting screw size Width Height Thru-bolt pattern (4 holes) learance grip to door Projection 5-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" vailable in Stainless Steel US Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip ustom finishes are available as engineering special, consult customer service dditional information 1-5/8" cylinder hole cut-out,centered on horizontal center line and 1/4" offset from vertical center line towards the lock side of the door esigned for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Protective cylinder collar spins to reduce damage from pipe wrench or other tool. omes with cylinder cup dditional cut-outs and locations are available as engineering special, consult customer service xterior hardware 54 Ives rchitectural hardware products

135 xterior hardware Vandal resistant trim VR910M-T with black grip VR914M-T without black grip or use with Von uprin 9875/9975 mortise lock exit device uilt-in lock protector prevents tampering on certain models. Thru-bolts direct to the exit device Non-handed Size 11 auge(0.120" thick) Mounting or door thickness 1-3/4-2-1/4" X 1" and X 1-1/2" mounting screw size Width Height Thru-bolt pattern (4 holes) learance grip to door Projection 7-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" vailable in Stainless Steel US Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip ustom finishes are available as engineering special, consult customer service 55 Pulls & plates Ives rchitectural hardware products 55

136 Vandal resistant trim 56 Pulls & plates VR910M-NL RHR with black grip VR910M-NL LHR with black grip VR914M-NL RHR without black grip VR914M-NL LHR without black grip or use with Von uprin 9875/9975 mortise lock exit device Night latch operation (cylinder not furnished) uilt-in lock protector prevents tampering on certain models. Thru-bolts direct to the exit device Non-handed, horizontal keyway Size 11 auge(0.120" thick) Mounting or door thickness 1-3/4-2-1/4" X 1" and X 1-1/2" mounting screw size Width Height Thru-bolt pattern (4 holes) learance grip to door Projection 7-1/4" 11" 1-3/4" wide x 10" high 1-1/2" 1-7/8" vailable in Stainless Steel US Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. ustom finishes are available as engineering special, consult customer service. dditional information 1-5/8" cylinder hole cut-out,centered on horizontal center line and 1/4" offset from vertical center line towards the lock side of the door esigned for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied. Protective cylinder collar spins to reduce damage from pipe wrench or other tool. omes with cylinder cup dditional cut-outs and locations are available as engineering special, consult customer service. xterior hardware 56 Ives rchitectural hardware products

137 lush pulls 1-3/16" 2-7/16" 1" 22 lush pull - rectangle Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. xtra deep recess and reverse tapered grip provide for ease of pulling and gripping. Packaged with fasteners for wood applications ertifications Meets NSI/HM and Made from wrought brass. HM escription Substrate inish 605 right brass rass Satin brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 26 ged bronze rass -643e/716 imensions 1-5/16" High x 3-1/8" Wide x 7/16" eep 218 lush pull - small circle Ideal for use on sliding doors. asy installation. Packaged 4 per bag ertifications Meets NSI/HM and Made from wrought brass. HM escription Substrate inish 605 right brass rass Satin brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 26 ged bronze rass -643e/716 imensions Inside cup diameter: 3/4" Overall diameter: 1" epth: 3/8" 57 Pulls & plates xterior hardware Ives rchitectural hardware products 57

138 lush pulls 221 lush pull - large circle Ideal for use on sliding doors. uilt-in prong design eliminates the need for screws or brads and facilitates installation. Packed with two escutcheon pins for added holding power. ertifications Meets NSI/HM and Made from wrought brass. 58 Pulls & plates HM escription Substrate inish 605 right brass rass Satin brass rass lackened rass rass Satin bronze rass /16" 2-7/16" 2-1/8" 13/32" 613 Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 26 ged bronze rass -643e/716 imensions Inside cup diameter: 2-1/8" Overall diameter: 2-7/16" epth: 7/16" 222 lush pull - rectangle Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Reverse tapered grip provide for ease of pulling. ertifications Meets NSI/HM and Made from cast brass. HM escription Substrate inish 605 right brass rass 3 xterior hardware 3-1/8" 1-5/16" 606 Satin brass rass lackened rass rass Satin bronze rass Oil rubbed bronze rass 10 Pull body 619 Satin nickel rass Matte black rass -LK ack plate 2-15/16" 625 right chrome rass Satin chrome rass 26 ged bronze rass -643e/716 imensions 3-1/8" high x 1-5/16" wide x 15/32" deep 58 Ives rchitectural hardware products

139 lush pulls 223 lush pull - oval Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Packaged with fasteners for wood applications ertifications Meets NSI/HM and Material Substrate Made from wrought brass. 1-5/16 " HM escription Substrate inish 605 right brass rass Satin brass rass Satin bronze rass Pulls & plates 613 Oil rubbed bronze rass /16" 13/32" 619 Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 26 ged bronze rass -643e/716 imensions 3-9/16" high x 1-5/16" wide x 14/32" deep 227 lush pull - deep well ontoured for ease of pulling. xtra deep well. Packaged with fasteners for wood applications 1-3/4" ertifications Meets NSI/HM and Made from wrought brass. HM escription Substrate inish 605 right brass rass Satin brass rass lackened rass rass Satin bronze rass Oil rubbed bronze rass 10 xterior hardware 3-5/8" 619 Satin nickel rass 15 17/32" 622 Matte black rass -LK 625 right chrome rass Satin chrome rass 26 ged bronze rass -643e/716 imensions 3-5/8" high x 1-3/4" wide x 9/16" deep Ives rchitectural hardware products 59

140 ecorative flush pulls 919 ecorative flush pull - oval ontoured for ease of pulling. Packaged with fasteners for wood applications. Surface #6 X 3/4" OH PH ertifications Meets NSI/HM and Made from brass. 60 Pulls & plates 1-19/32 1-3/32 15/32 HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 4-23/32 4-1/4 3-3/4 625 right chrome rass Satin chrome rass 626 ged bronze rass -643e/716 imensions 4-23/32" high x 1-19/22" wide x 15/32" deep 950 ecorative flush pull - rectangle eatures a finger pocket for ease of pulling. Packaged with fasteners for wood applications. oncealed #6 X 3/4" OH PH ertifications Meets NSI/HM and Made from brass. HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass 619 xterior hardware 622 Matte black rass -LK 625 right chrome rass Satin chrome rass 626 ged bronze rass -643e/716 imensions 3-3/4" high x 2-7/8" wide x 11/16" deep 60 Ives rchitectural hardware products

141 ecorative flush pulls 955 ecorative flush pull - square, deep well eatures a finger pocket for ease of pulling. Packaged with fasteners for wood applications. xposed #6 X 3/4" H PH ertifications Meets NSI/HM and Made from brass. HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 626 ged bronze rass -643e/716 imensions 4-5/8" high x 3-29/32" wide x 1-3/16" deep 61 Pulls & plates 960 ecorative flush pull - rectangle, narrow eatures a finger pocket for ease of pulling. Packaged with fasteners for wood applications. oncealed #6 X 3/4" OH PH ertifications Meets NSI/HM and Made from brass. HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 626 ged bronze rass -643e/716 imensions 3-1/16" high x 1-7/8" wide x 9/16" deep xterior hardware Ives rchitectural hardware products 61

142 ecorative flush pulls 62 Pulls & plates 2 7/16" 13/16" 1 3/8" 1/4" 1/8" 9/32" 3 15/16" 3 3/8" 3 11/16" 9/32" 1/8" 962 ecorative flush pull - rectangle eatures a finger pocket for ease of pulling. lack painted finger pocket Packaged with fasteners for wood applications. oncealed #8 X 3/4" OH PH ertifications Meets NSI/HM and Made from brass. HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 626 ged bronze rass -643e/716 imensions 3-15/16" high x 2-7/16" wide x 19/32" deep xterior hardware 62 Ives rchitectural hardware products

143 Sliding door pulls 230 Sliding door edge pull 3/4" width allows installation on narrow as well as standard doors. Spring automatically returns lever flush with plate. Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from solid brass. HM escription Substrate inish 605 right brass rass Satin brass rass lackened rass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 26 ged bronze rass -643e/716 imensions 3-7/8" high x 3/4" wide 42 Pocket sliding door bolt xclusive Ives design permits emergency release of bolt from outside the door. Spring activated design allows feather-touch action. rass grommet supplied to cap release hole, protecting the door s finish. Packaged with fasteners for wood applications Made from wrought brass. HM escription Substrate inish 605 right brass rass Satin brass rass lackened rass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass 26 ged bronze rass -643e/716 imensions Overall size plate: 3-1/16" high x 1-5/32" wide Strike: 1" high x 3/4" wide epth of mortise: 5/8" 63 Pulls & plates xterior hardware Ives rchitectural hardware products 63

144 Sliding door pulls 64 Pulls & plates 990 Sliding door pull its doors 1-3/8" to 1-1/2". ecorative coined edges. Pre-assembled for doors opening left to right. Plates are reversible. Packaged with fasteners for wood applications ody and strike made from solid brass. HM escription Substrate inish 666 right brass luminum lackened brass luminum right nickel luminum Satin Nickel luminum Satin chrome luminum ged ronze luminum -643e/ right brass rass Oil rubbed bronze rass Satin Nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged ronze rass -643e/716 imensions 1-3/4" x 2-1/4" H xterior hardware 64 Ives rchitectural hardware products

145 Sliding door pulls 991 Sliding door pull - privacy its doors 1-3/8" to 1-1/2". ecorative coined edges. Pre-assembled for doors opening left to right. Plates are reversible. Packaged with fasteners for wood applications ody and strike made from solid brass. HM escription Substrate inish 666 right brass luminum lackened brass luminum right nickel luminum Pulls & plates 670 Satin Nickel luminum Satin chrome luminum ged ronze luminum -643e/ right brass rass Oil rubbed bronze rass Satin Nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged ronze rass -643e/716 imensions 1-3/4" x 2-1/4" H Screen door pull 25 Screen door pull lso used as a window lift, drawer or utility pull Packed with fasteners for wood applications ertifications Meets NSI/HM , L12231 Material Substrate ast aluminum imensions Length 4-7/8" Projection 1-5/32" Mounting holes 4-1/8" center to center HM escription Substrate inish 666 right brass luminum luminum clear coat luminum Matte black luminum -LK --- White luminum -W or other colors, consult factory. xterior hardware Ives rchitectural hardware products 65

146 Notes xterior hardware 66 Pulls & plates 66 Ives rchitectural hardware products

147 xterior hardware lush bolts and coordinators Table of contents utomatic flush bolts Metal doors 31P Top and bottom bolts (pair) T Top bolt only ottom bolt only Top bolt with auxiliary fire latch Top bolt with auxiliary fire latch and retrofit plate... 3 utomatic flush bolts Wood doors 41P Top and bottom bolts (pair) T Top bolt only ottom bolt only Top bolt with auxiliary fire latch... 5 onstant latching flush bolts Metal doors 51P Top and bottom bolts (pair) T Top bolt only Top bolt with auxiliary fire latch Top bolt with auxiliary fire latch and retrofit plate... 7 onstant latching flush bolts Wood doors 61P Top and bottom bolts (pair) T Top bolt only Top bolt with auxiliary fire latch...9 Manual flush bolts 261 lush bolt - 4" lush bolt - 6" square end lush bolt - 6" round end...12 Manual flush bolts Wood doors 358 Top or bottom bolts...13 Manual flush bolts Metal doors 457 Top or bottom bolts Top or bottom bolts...15 ust proof strikes P1 ust proof strike - round face plate P2 ust proof strike - rectangular face plate How to order OR and accessories...17 oordinators ar coordinators OR ar coodinators oordinators iller bars L iller bars oordinators Mounting brackets M1 and M2 Mounting brackets...21 M1, M2 and M3 ire rated mounting brackets...22 M1V, M2V and M3V...22 oordinators ravity coordinators OR7 and OR9 ravity coordinators...23 oordinators - arry bar 1 arry ar Pulls &plates Ives rchitectural hardware products 1

148 utomatic flush bolts Metal doors Pulls &plates 2 Top olt ottom olt 31P Top and bottom bolts (pair) 31T Top bolt only 31 ottom bolt only or use with metal doors only ully automatic inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. Low actuation forces top bolt has no spring tension. Non-handed. olt throw is 3/4" with a 7/8" vertical adjustment. olt backset is 3/4" Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. ertifications Meets NSI Type 25 its standard NSI door frame preparations. UL Listed 3 Hour fire doors 8 0" X 10 0" Mounting 8-32 X 3/8" UPHMS X1-1/4" Plastic anchor 6-32 X 3/8 PHMS 6 X 3/4 PHSMS 8 X 1 PHSMS 10 X 1 PHSMS imensions ody size (Width X Length X epth) uide size (Width X Length X Hieight X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 27/32" x 3/32" Strike size (Width X Length X Thickness) Rub plate size (Width X Length X Thickness) 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US10 LK Matte black Stainless steel 629 right stainless steel Stainless steel US Satin stainless steel Stainless steel US32 ustom finishes are available as engineering special, consult customer service. xterior hardware dditional options Optional rod lengths available for top bolt only on non-fire rated openings 18", 24", 36" and 48". vailable accessory items Security pin screws P1 and P2 dust proof strike, see page 16 2 Ives rchitectural hardware products

149 utomatic flush bolts Metal doors Top bolt uxiliary fire latch 32 Top bolt with auxiliary fire latch 33 Top bolt with auxiliary fire latch and retrofit plate or use with metal doors only ully automatic inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. 32 Model with auxiliary fire latch eliminates the bottom bolt 33 Model with auxiliary fire latch eliminates the bottom bolt and includes a retrofit plate to cover existing bottom bolt prep. Low actuation forces top bolt has no spring tension. Non-handed. olt throw is 3/4" with a 7/8" vertical adjustment. olt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. ertifications Meets NSI Type 25 its standard NSI door frame preparations. UL Listed 3 Hour fire doors 8 0" X 8 0" Mounting 8-32 X 3/8" UPHMS X 1-1/4" Plastic anchor 6-32 X 3/8 PHMS 6 X 3/4 PHSMS 8 X 1 PHSMS 10 X 1 PHSMS 3 Pulls &plates imensions ody size (Width X Length X epth) uide size (Width X Length X Height X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 27/32" x 3/32" uxiliary fire latch size (Width X Length X epth) Retrofit plate size (Width X Length X Thickness) Strike size (Width X Length X Thickness) Rub plate size (Width X Length X Thickness) 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" 1" x 1-3/4" x 3-1/4" 1" x 6-3/4" x 3/32" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US10 LK Matte black Stainless steel 629 right stainless steel Stainless steel US Satin stainless steel Stainless steel US32 ustom finishes are available as engineering special, consult customer service. dditional options Optional rod lengths available for top bolt only on non-fire rated openings 18", 24", 36" and 48". vailable accessory items Security pin screws P1 and P2 dust proof strike, see page 16 xterior hardware Ives rchitectural hardware products 3

150 utomatic flush bolts Wood doors Pulls &plates Top bolt ottom bolt 41P Top and bottom bolts (pair) 41T Top bolt only 41 ottom bolt only or use with wood doors only ully automatic inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. Low actuation forces top bolt has no spring tension. Non-handed. olt throw is 3/4" with a 7/8" vertical adjustment. olt backset is 3/4" ertifications Meets NSI Type 25 UL Listed 90 Min fire doors 8 0" X 8 0" 4 Mounting 8-32 X 3/8" UPHMS X1-1/4" Plastic anchor 6-32 X 3/8 PHMS 6 X 3/4 PHSMS 8 X 1 PHSMS 10 X 1 PHSMS imensions ody size (Width X Length X epth) uide size (Width X Length X Thickness) Strike size (Width X Length X Thickness) Rub plate size (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US10 LK Matte black Stainless steel 629 right stainless steel Stainless steel US Satin stainless steel Stainless steel US32 ustom finishes are available as engineering special, consult customer service. vailable accessory items Security pin screws P1 and P2 dust proof strike, see page 16 xterior hardware 4 Ives rchitectural hardware products

151 utomatic flush bolts Wood doors 42 Top bolt with auxiliary fire latch or use with Metal doors only ully automatic inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. 42 Model with auxiliary fire latch eliminates the bottom bolt Low actuation forces top bolt has no spring tension. Non-handed. olt throw is 3/4" with a 7/8" vertical adjustment. olt backset is 3/4" Top bolt uxiliary fire latch ertifications Meets NSI Type 25 UL Listed 3 Hour fire doors 8 0" X 8 0" Mounting 8-32 X 3/8" UPHMS X1-1/4" Plastic anchor 6-32 X 3/8 PHMS 6 X 3/4 PHSMS 8 X 1 PHSMS 10 X 1 PHSMS imensions ody size (Width X Length X epth) uide size (Width X Length X Thickness) Strike size (Width X Length X Thickness) Rub plate size (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" 5 Pulls &plates uxiliary ire Latch Size (Width X Length X epth) 1" x 1-3/4" x 3-1/4" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US10 LK Matte black Stainless steel 629 right stainless steel Stainless steel US Satin stainless steel Stainless steel US32 ustom finishes are available as engineering special, consult customer service. vailable accessory items Security pin screws P1 and P2 dust proof strike, see page 16 xterior hardware Ives rchitectural hardware products 5

152 onstant latching flush bolts Metal doors Pulls &plates 6 Top bolt ottom bolt 51P Top and bottom bolts (pair) 51T Top bolt only or use with metal doors only onstant latching inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed. Low actuation forces Non-handed. olt throw is 3/4" with a 7/8" vertical adjustment. olt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. ertifications Meets NSI Type 27 its standard NSI door frame preparations. UL Listed 3 Hour fire doors 8 0" X 8 0" Mounting 8-32 X 3/8" UPHMS X1-1/4" Plastic anchor 6-32 X 3/8 PHMS 6 X 3/4 PHSMS 8 X 1 PHSMS 10 X 1 PHSMS imensions ody size (Width X Length X epth) uide size (Width X Length X Height X Thickness) Strike size (Width X Length X Thickness) Rub plate size (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 11/16" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US10 LK Matte black Stainless steel 629 right stainless steel Stainless steel US Satin stainless steel Stainless steel US32 ustom finishes are available as engineering special, consult customer service. xterior hardware dditional options Optional rod lengths available for top bolt only on non-fire rated openings 18", 24", 36" and 48". vailable accessory items Security pin screws P1 and P2 dust proof strike, see page 16 6 Ives rchitectural hardware products

153 onstant latching flush bolts Metal doors Top bolt uxiliary fire latch 52 Top bolt with auxiliary fire latch 53 Top bolt with auxiliary fire latch and retrofit plate or use with metal doors only onstant latching inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed.. 52 Model with auxiliary fire latch eliminates the bottom bolt 53 Model with auxiliary fire latch eliminates the bottom bolt and includes a retrofit plate to cover existing bottom bolt prep. Low actuation forces Non-handed. olt throw is 3/4" with a 7/8" vertical adjustment. olt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. ertifications Meets NSI Type 27 its standard NSI door frame preparations. UL Listed 3 Hour fire doors 8 0" X 8 0" Mounting 8-32 X 3/8" UPHMS X1-1/4" Plastic anchor 6-32 X 3/8 PHMS 6 X 3/4 PHSMS 8 X 1 PHSMS 10 X 1 PHSMS imensions ody size (Width X Length X epth) uide size (Width X Length X Height X Thickness) Strike size (Width X Length X Thickness) Rub plate size (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 11/16" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" uxiliary fire latch size (Width X Length X epth) Retrofit plate size (Width X Length X Thickness) 7 Pulls &plates 1" x 1-3/4" x 3-1/4" 1" x 6-3/4" x 3/32" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US10 LK Matte black Stainless steel 629 right stainless steel Stainless steel US Satin stainless steel Stainless steel US32 ustom finishes are available as engineering special, consult customer service. dditional options Optional rod lengths available for top bolt only on non-fire rated openings 18", 24", 36" and 48". vailable accessory items Security pin screws P1 and P2 dust proof strike, see page 16 xterior hardware Ives rchitectural hardware products 7

154 onstant latching flush bolts Wood doors Pulls &plates 8 Top bolt ottom bolt 61P Top and bottom bolts (pair) 61T Top bolt only or use with wood doors only onstant latching inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when door closes. Low actuation forces Non-handed. olt throw is 3/4" with a 7/8" vertical adjustment. olt backset is 3/4" ertifications Meets NSI Type 27 UL Listed 90 Min fire doors 8 0" X 8 0" Mounting 8-32 X 3/8" UPHMS X1-1/4" Plastic anchor 6-32 X 3/8 PHMS 6 X 3/4 PHSMS 8 X 1 PHSMS 10 X 1 PHSMS imensions ody size (Width X Length X epth) uide size (Width X Length X Thickness) Strike size (Width X Length X Thickness) Rub plate size (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US10 LK Matte black Stainless steel 629 right stainless steel Stainless steel US Satin stainless steel Stainless steel US32 ustom finishes are available as engineering special, consult customer service. vailable accessory items Security pin screws P1 and P2 dust proof strike, see page 16 xterior hardware 8 Ives rchitectural hardware products

155 onstant latching flush bolts Wood doors 62 Top bolt with auxiliary fire latch or use with metal doors only ully automatic inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened 62 Model with auxiliary fire latch eliminates the bottom bolt Low actuation forces Non-handed olt throw is 3/4" with a 7/8" vertical adjustment olt backset is 3/4" Top bolt uxiliary fire latch ertifications Meets NSI Type 27 UL Listed 20 Min fire doors 8 0" X 8 0" Mounting 8-32 X 3/8" UPHMS X1-1/4" Plastic anchor 6-32 X 3/8 PHMS 6 X 3/4 PHSMS 8 X 1 PHSMS 10 X 1 PHSMS imensions ody size (Width X Length X epth) uide size (Width X Length X Thickness) Strike size (Width X Length X Thickness) Rub plate size (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" 9 Pulls &plates uxiliary ire Latch Size (Width X Length X epth) 1" x 1-3/4" x 3-1/4" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US10 LK Matte black Stainless steel 629 right stainless steel Stainless steel US Satin stainless steel Stainless steel US32 ustom finishes are available as engineering special, consult customer service. vailable accessory items Security pin screws P1 and P2 dust proof strike, see page 16 xterior hardware Ives rchitectural hardware products 9

156 Manual flush bolts Pulls &plates lush bolt - 4" n exceptionally smooth working flush bolt with sharp, crisp lines ouble action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole Made from polished cast brass olt tip is 5/16" iameter olt throw is 3/4" olt backset is 15/32" ertifications Meets NSI , L04201 Mounting 5 X 5/8" PHSMS 8 X 3/4" PHSMS imensions ody size (Width X Length X epth) Strike size (Width X Length) 3/4" x 4" x 1-1/8" 5/8" x 1-1/2" HM escription Substrate US 605 right brass rass US3 609 Satin brass rass US5 613 Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 ustom finishes are available as engineering special, consult customer service xterior hardware 10 Ives rchitectural hardware products

157 xterior hardware Manual flush bolts 262 lush bolt - 6" square end n exceptionally smooth working flush bolt with sharp, crisp lines ouble action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole Made from polished cast brass olt tip is 1/2" diameter olt throw is 1" olt backset is 15/32" ertifications Meets NSI , L04201 Mounting 5 X 5/8" PHSMS 8 X 3/4" PHSMS imensions ody size (Width X Length X epth) Strike size (Width X Length) 3/4" x 6" x 1-11/32" 7/8" x 1-3/4" HM escription Substrate US 605 right brass rass US3 609 Satin brass rass US5 613 Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 ustom finishes are available as engineering special, consult customer service. 11 Pulls &plates Ives rchitectural hardware products 11

158 Manual flush bolts Pulls &plates lush bolt - 6" round end flush bolt with radiused bottom faceplate designed specifically for simple one-step router installation ouble action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole aceplate is polished solid brass; bolt is made from aluminum zinc alloy olt tip is 1/2" diameter olt throw is 1" olt backset is 1/2" ertifications Meets NSI , L Mounting 5 X 5/8" PHSMS 8 X 3/4" PHSMS imensions ody size (Width X Length X epth) Strike size (Width X Length) 3/4" x 6" x 1-7/16" 7/8" x 1-3/4" HM escription Substrate US 605 right brass rass US3 609 Satin brass rass US5 613 Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 ustom finishes are available as engineering special, consult customer service. xterior hardware 12 Ives rchitectural hardware products

159 Manual flush bolts Wood doors 358 Top or bottom bolts When the active door is opened, the lever can be moved to the up position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the down position, projecting the bolt into the strike and securely locking the inactive leaf Reduces installation costs; requires only simple router mortise at top and bottom corners of doors oor strength and rigidity maintained by tying door faces to reinforcing extensions on guide with machine screws and bearing washers, not supplied Non-handed olt tip 1/2" diameter olt throw is 3/4" with a 7/8" vertical adjustment olt backset is 3/4" Not available for rabbeted door installations ertifications Meets NSI , L04261 UL Listed 90 Minute fire doors 8 0" X 10 0". ire rated openings require top and botom bolt. Mounting 8 X 1" PHSMS 8 X 3/4" PHSMS imensions ody size (Width X Length X epth) uide Size (Width X Length X Thickness) Strike size (Width X Length X Thickness) 1" x 6-3/4" x 1-3/8" 1" x 2-1/2" x 5/64" 15/16" x 2-1/4" x 5/64" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass ustom finishes are available as engineering special, consult customer service. vailable accessory items P1 and P2 dust proof strike, see page Pulls &plates xterior hardware Ives rchitectural hardware products 13

160 Manual flush bolts Metal doors Pulls &plates Top or bottom bolts When the active door is opened, the lever can be moved to the up position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the down position, projecting the bolt into the strike and securely locking the inactive leaf. Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. Non-handed olt tip 1/2" diameter olt throw is 3/4" with a 7/8" vertical adjustment olt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip ertifications Meets NSI , L04261 UL Listed 3 Hour fire doors 8 0" X 10 0". ire rated openings require top and bottom bolt. Mounting 8-32 X 1" PHMS imensions ody size (Width X Length X epth) uide Size (Width X Length X Thickness) Strike size (Width X Length X Thickness) 1-1/4" x 6-3/4" x 1-1/8" 1" x 2" x 5/64" 15/16" x 2-1/4" x 5/64" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass ustom finishes are available as engineering special, consult customer service. xterior hardware vailable options Optional rod lengths available for top bolt only on non-fire rated openings 18", 24" for fire rated doors with HJ approval, 36" and 48" for non-fire rated doors vailable accessory items P1 and P2 dust proof strike, see page Ives rchitectural hardware products

161 Manual flush bolts Metal doors 458 Top or bottom bolts When the active door is opened, the lever can be moved to the up position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the down position, projecting the bolt into the strike and securely locking the inactive leaf. Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. Non-handed olt tip 1/2" diameter olt throw is 3/4" with a 7/8" vertical adjustment olt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip ertifications Meets NSI , L04261 UL Listed 3 Hour fire doors 8 0" X 10 0". ire rated openings require top and bottom bolt. Mounting 8-32 X 1" PHMS imensions ody size (Width X Length X epth) uide Size (Width X Length X Thickness) Strike size (Width X Length X Thickness) 1" x 6-3/4" x 1-1/8" 1" x 2" x 5/64" 15/16" x 2-1/4" x 5/64" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 609 lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass ustom finishes are available as engineering special, consult customer service. vailable options Optional rod lengths available for top bolt only on non-fire rated openings 18", 24" for fire rated doors with HJ approval, 36" and 48" for non-fire rated doors vailable accessory items P1 and P2 dust proof strike, see page Pulls &plates xterior hardware Ives rchitectural hardware products 15

162 ust proof strikes Pulls &plates P1 P1 ust proof strike - round face plate P2 ust proof strike - rectangular face plate esigned for use with the bottom bolt of all flush bolts. Spring-loaded plunger returns to floor or threshold level anytime flush bolt is retracted, eliminating need to clean standard floor strikes. Strike hole is 3/4" diameter and 1-1/8" deep ertifications Meets NSI , L14011 Mounting 8-32 X 1" PHMS imensions P1 ace Plate (iameter) P1 ace Plate (Width X Length X Thickness) ody: (iameter X epth) 1-7/16" 1-5/8" x 3-1/2" x 1/8" 1-3/16" x 1-7/8" 16 P2 HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US * Satin nickel rass US * Matte black rass LK 625 right chrome rass US Satin chrome rass US26 643e/716 * ged bronze rass * only available with P2 ustom finishes are available as engineering special, consult customer service vailable accessory items Security pin screws xterior hardware 16 Ives rchitectural hardware products

163 How to order ar coordinators How to order OR and accessories OR 52 US28 L20 36" OR size: 32, 42, 52, 60, 72 : US28, US26, 315N iller bar (if desired): L20, L32, L44 Vertical rod exit device cutout type (if applicable):,,,,,, If other vertical rod exit device not listed on chart, from page 16, include information as shown on page 16. ctive door size Required for LL vertical rod exit device applications To determine the size OR you need: Start with the active door width (X) Next consider the overall frame opening between stops () Preferably, the coordinator would equal the active door width (X) + approximately 1/2 inactive door width (Y). The coordinator must be 6" longer than the active door width (X) and less than the overall frame opening between stop (). xamples: Pair of 30" doors, 5/8" stops ctive oor Size, X = 30" Overall frame opening between stops, = 58-3/4" Recommended coordinator: OR42 Pair of 36" doors, 5/8" stops ctive door size, X = 36" Overall frame opening between stops, = 70-3/4" Recommended coordinator: OR52 V STOP THIKNSS X TIV L OORINTOR TIV OOR WITH Y INTIV OOR WITH INTIV L STOP WITH 36" ctive door, 18" Inactive door, 5/8" stops ctive door size, X = 36" Overall frame opening between stops, = 52-3/4" Recommended coordinator: OR42 48" ctive door, 24" Inactive door, 5/8" stops ctive door size, X = 48" Overall frame opening between stops, = 94-3/4" Recommended coordinator: OR60 W 17 Pulls &plates xterior hardware Ives rchitectural hardware products 17

164 oordinators - Special factory preparation Pulls &plates 18 Special factory preparation for use with vertical rod exit devices oordinators may need to be prepared at the factory for use with some surface or concealed vertical rod exit devices. (See chart) xit device manufacturer xit device number evice backset Maximum active door Von uprin /8" 33" 43" 51" 63" Von uprin /4" 33" 43" 51" 63" oordinator size needed 42" 52" 60" 72" 42" 52" 60" 72" oordinator cutout type Type Type Mounting bracket needed None M1V, M2V or M3V see page 22 Von uprin /8" 33" 43" 51" 63" Von uprin 33/ / / / /4" 33" 43" 51" 64" 42" 52" 60" 72" 42" 52" 60" 72" Type Type None None Von uprin 33/ / / /9948- Von uprin 33/3547W 33/3547W- 98/9947W 98/9947W- alcon XX- -XX alcon 17- -W W 18- -W W XX- -W -XX- -W 24--W W 25--W -25--W 2-3/4" 33" 43" 51" 64" 1-5/16" 33" 43" 51" 66" 2-3/4" 33" 43" 51" 63" 2-13/16" 33" 43" 51" 63" 42" 52" 60" 72" 42" 52" 60" 72" 42" 52" 60" 72" 42" 52" 60" 72" Type Type Type Type None None None None xterior hardware If the exit device is not listed the following information is needed. xit device manufacturer and model no. ctive door size, X Inactive door size, Y xit device backset, U Stop width, W Stop thickness if other than 5/8", V 18 Ives rchitectural hardware products

165 oordinators ar coordinators OR ar coodinators The OR Series coordinators are designed for use on pairs of doors when one door needs to close before the other. ll OR units function easily. The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf. ll OR units do not function correctly with swingclear hinges. onsult factory when used with 3/4" offset pivots. ll OR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure. ll OR units are compatible with flush bolts. or openings where doors are unequal size. The coordinator length should equal the active door width plus approximately 1/2 the inactive door width. The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops. The OR Series does not cover the entire length of the stop, so a L filler bar can be provided to maintain architecturally clean lines. ertifications Meets NSI Type 21 UL Listed for installation on labeled frame Material Substrate luminum 6000 Series Sizes The OR Series is available in five sizes for variable door opening widths. oordinator number Length of channel or opening widths ommon applications OR32 32" 34" - 52" Pair of 2'0" oors OR42 42" 52" - 72" Pair of 2'6" oors OR52 52" 62" - 92" Pair of 3'0" oors OR60 60" 70" - 108" Pair of 3'6" oors OR72 72" 84" - 132" Pair of 4'0" oors 19 Pulls &plates HM escription Substrate US 628 Satin alumium luminum US lack anodized luminum 313N 713 Satin chrome luminum US26 ustom finishes are available as engineering special, consult customer service vailable options Optional filler bars: L20-20", L32-32" and L44-44", available to maintain clean line. Security pin screws Special prep cut-outs: Required for certain vertical exit device applications. See page 18 for common examples. If other vertical rod exit device not listed on chart is required, include required information as shown on page 18. onsult customer service for other applications. vailable accessory items Optional mounting brackets available: M1, M2, M1, M2, M3, M1V, M2V and M3V for other stop applied hardware. Security pin screws Replacement mounting package Replacement rub plate package xterior hardware Ives rchitectural hardware products 19

166 oordinators iller bars Pulls &plates 20 L iller bars The OR Series does not cover the entire length of the stop, so a L filler bar can be provided to maintain architecturally clean lines. The L filler bars are available in three sizes for variable frame openings. L filler bars are field sized to frame opening. ertifications Meets NSI Type 21 UL Listed for installation on labeled frame Material Substrate luminum 6000 Series Sizes iller ar number Length imensions (Width X epth X Length) L20 20" 1-5/8" x 5/8" x 20" L32 32" 1-5/8" x 5/8" x 32" L44 44" 1-5/8" x 5/8" x 44" HM escription Substrate US 628 Satin alumium luminum US lack anodized luminum 313N 713 Satin chrome luminum US26 ustom finishes are available as engineering special, consult customer service vailable accessory items Security pin screws xterior hardware 20 Ives rchitectural hardware products

167 xterior hardware oordinators Mounting brackets M1 and M2 Mounting brackets llows stop mounted hardware to be properly installed without damaging the OR coordinator, such as a parallel arm closer or a non-fire-rated surface vertical rod strike. Stop mounted hardware will need to be lowered to compensate for the height of the coordinator and mounting bracket. ertifications Meets NSI Type 21 luminum 380 Sizes Product Jamb depth Stop width imensions M1 4-3/4" Min Over 2-1/2" 4" W x 3" x 15/16" T M2 4-3/4" Min Up to 2-1/2" 4" W x 3-1/4" x 1-5/8" T HM escription Substrate US 600 Primed for paint luminum USP lat black painted luminum LK 689 luminum painted luminum SP28 ustom finishes are available as engineering special, consult customer service. 21 Pulls &plates Ives rchitectural hardware products 21

168 oordinators Mounting brackets Pulls &plates 22 M1V M2V M3V M1, M2 and M3 M1V, M2V and M3V ire rated mounting brackets llows for fire-rated stop mounted hardware to be properly installed without damaging the OR oordinators, such as fire-rated surface vertical rod exit device strikes. Latch will need to be lowered to compensate for the height of the coordinator and mounting bracket. M-V are designed for Von uprin soffit latch. ertifications Meets NSI Type 21 old rolled steel Sizes Product Jamb depth Stop width imensions M1 5" 1-1/2" - 2-1/4" 4" W x 3" x 1-5/8" T M1V 5" 1-1/2" - 2-1/4" 4" W x 3" x 1-5/8" T M2 5-7/8" 2-3/8" - 3-1/4" 4" W x 3" x 1-5/8" T M2V 5-7/8" 2-3/8" - 3-1/4" 4" W x 3" x 1-5/8" T M3 6-7/8" Over 3-3/8" 4"W x 3-1/2" x 1"T M3V 6-7/8" Over 3-3/8" 4"W x 3-1/2" x 1"T HM escription Substrate US 600 Primed for paint Steel USP lat black painted Steel LK 689 luminum painted Steel SP28 ustom finishes are available as engineering special, consult customer service xterior hardware 22 Ives rchitectural hardware products

169 oordinators ravity coordinators OR7 and OR9 ravity coordinators When active door is open, coordinator prevents active door from closing until inactive door bypasses. losing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. s inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door. Non-handed. ravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. ertifications Meets NSI Type 21 UL Listed for fire doors Mounting 8-32 X 1" PHMS orged brass Sizes OR7 7" projection OR7 for use on pairs of doors with astragal on active door up to 4' or with astragal on inactive door up to 3'4" or with astragal on both doors up to 2'10" OR9 9" projection OR9 for use on pairs of doors with astragal on active over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" HM escription Substrate US 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 ustom finishes are available as engineering special, consult customer service. vailable accessory items Security pin screws Replacement mounting package Replacement roller and bolt package Replacement rubber roller and pin package Replacement rub plate package 23 Pulls &plates xterior hardware Ives rchitectural hardware products 23

170 oordinators - arry bar Pulls &plates 24 1 arry ar Used when it is possible for the inactive door to be opened before the active door Prevents damage to the doors and other hardware Nylon roller insures quiet and efficient operation Non-handed Standard sex bolts for mounting ertifications Meets NSI Type 21 ll-steel construction imensions oor closed oor open 1.5/8" X 5.3/4" 1.5/8" X 2.1/2" HM escription Substrate US 600 Primed for paint Steel USP 632 right brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US ark satin bronze Steel US right chrome Steel US Satin chrome Steel US26 lat black coated Steel LK ustom finishes are available as engineering special, consult customer service. vailable accessory items Security pin screws Replacement nylon roller and pin package xterior hardware 24 Ives rchitectural hardware products

171 Surface bolts, latches & catches Table of contents Surface bolts S360 Surface bolt...2 S453 Surface bolt...2 S1630 Surface bolt...3 S1640 Surface bolt...3 S1600M1 Surface bolt...4 S1600M2 Surface bolt...4 ecorative surface bolts 40 Surface bolt, decorative light duty Surface bolt, decorative heavy duty...5 utch door & mortise door bolts 054 utch door bolt... 6 S48 Mortise door bolt... 6 oor guards 481 hain door guard Solid bar door guard... 7 Roller latches/optional strikes RL30 Roller latch... 8 RL30 Roller latch... 8 RL32 Roller latch... 8 RL32 Roller latch... 8 RL36 Roller latch... 9 RL36 Roller latch... 9 RL38 Roller latch... 9 RL1152 Roller latch...10 STK685 Strike...10 STK685L Strike...10 oth strikes:...10 ngle stops S895 ngle stop S18 ngle stop Latches/catches L11 Invisible latch L12 Invisible latch L14 Invisible latch, auxiliary pusher L21 all catch L21 all catch L22 all catch Magnetic catch Magnetic catch, dual double pole Magnetic catch, dual triple pole Roller catch Roller catch Roller catch all catch, adjustable all catch, dual adjustable - square corners all catch, dual adjustable - rounded corners lbow atch...17 Pulls &plates 1 xterior hardware Ives rchitectural hardware products 1

172 Surface bolts Pulls &plates 2 xterior hardware vailable mortise strike S360 Surface bolt Surface bolt has 1-1/4" throw for maximum security Jimmy-resistant design, bolt locks automatically when thrown, can be released only be pressing knob toward door while retracting Ideal for all types of doors vailable in 12" length Unit locks in both the up and down position ccepts padlock (not furnished) with maximum 3/8" diameter shackle, minimum 1-3/4" shackle opening height Units packed with one-way wood screws for added security - Standard wood screws also supplied Units packed with a universal top strike (US) ertifications Meets NSI UL listed for 3 hour fire doors, up to 10'0" Miami ade ounty NO listed lorida uilding ommision listed M 361 and 320 listed Heavy duty steel vailable accessory items Sex bolts Mortise bottom strike (MS) HM escription Substrate inish 604 lear zinc Steel US2 S453 Surface bolt HM escription Substrate inish imensions ar: 3/4" wide x 3/4" thick Overall width: 2-1/32" Overall projection: 2-1/16" Top Strike: 1-1/2" wide x 1-1/2" long x 3/16" thick vailable mortise strike: 1-5/8" wide x 3-1/2" long x 1/8" thick Surface bolt has 1-3/16" throw for maximum security Strong tension springs prevent creep Ideal for all types of doors vailable 8" & 12" lengths Units packed with standard wood screws and machine screws to meet most field conditions Units packed with both a universal top strike (US) and a mortise bottom strike (MS) ertifications Meets NSI L84161 UL listed for 3 hour fire doors, up to 10'0" Heavy duty steel vailable accessory items Sex bolts Thru bolts (machine screws with cap nuts) not intended for use as security screws imensions ar: 3/4" wide x 1/4" thick Overall width: 2-1/32" Overall projection: 1-5/16" Top Strike: 1-1/2" wide x 1-1/2" long x 3/16" thick ottom strike: 1-5/8" wide x 3-1/2" long x 1/8" thick 2 Ives rchitectural hardware products 604 lear zinc Steel US2 632* right brass Steel US3 633* Satin brass Steel US4 639 Satin bronze Steel US Oil rubbed bronze Steel US10 643e/716 ged bronze Steel 643e/ Satin nickel Steel US Satin chrome Steel US Matte black Steel LK * Only available in 8 bolt length. or other colors, consult factory.

173 Surface bolts S1630 Surface bolt S1640 Surface bolt Standard surface bolt has 1" throw for maximum security Ideal for all types of doors ully concealed mounting prevents vandalism Units packed with wood and machine screws to meet most field conditions omes end plug and end plug stud package vailable in locking version. Unit locks in both the up and down position. Locking bolts are furnished with 2 keys in 4 keying variations ertifications 1630 Meets NSI L84161 and UL listed for 3 hour fire doors, up to 8'0" 1640 Meets NSI L Series is constructed of heavy duty steel 1640 Series is constructed of brass Universal top strike lat bottom strike vailable options Strike options T Top strike only ottom strike only T Top and bottom strike * TL Top locking strike only L ottom locking strike only TL Top and bottom locking strike * * vailable on S1630 Only vailable accessory items Security pin screw Sex bolts available nd plug and end plug stud package ylinder package Replacement strike packages S1630 HM S SUSTRT inish 604 lear zinc Steel US2 640 Oil rubbed bronze Steel US Satin chrome Steel US26 imensions ody: 8" long x 7/8" wide x 3/4" thick, Overall knob or lock housing projection: 1-1/2" Top strike: 1-1/4" wide x 7/8" tall x 15/16" deep ottom strike: 3" long x 1" wide x 1/8" thick Key code 1289 Standard key code Pulls &plates 3 S right brass rass US3 613 Oil rubbed bronze rass US Satin chrome rass US26 or other colors, consult factory. xterior hardware Ives rchitectural hardware products 3

174 Surface bolts Pulls &plates S1600M1 Surface bolt S1600M2 Surface bolt Standard surface bolt has 3-1/2" throw for maximum security and for doors with larger undercuts Sleek handle design Ideal for all types of doors ully concealed mounting prevents vandalism vailable in locking version. Unit locks in both the up and down position. Locking bolts are furnished with 2 keys in 4 keying variations Units packed with wood and machine screws to meet most field conditions M1 version has ctuator tab pointing away from the door M2 version has ctuator tab pointing towards the door ertifications Meets NSI L84161 and UL Listed for 3 hour fire doors, up to 8'0" onstructed of heavy duty steel S1600M1 S1600M2 S1600M2-TL 4 Optional flat bottom strike Optional universal strike vailable options Strike options T Top strike only ottom strike only TL Top locking strike only L ottom locking strike only vailable accessory items Security pin screw Sex bolts available nd plug and end plug stud package ylinder package Replacement strike packages S1630 HM S SUSTRT inish 689 luminum painted Steel SP ull bronze painted Steel SP ark bronze painted Steel SP ull brass painted Steel SP4 631 Matte black Steel LK imensions ar: 11" long x 3/4" wide x 3/4" thick, locking version 1-1/2" thick Top strike: 1-1/4" wide x 7/8" tall x 15/16" deep ottom strike: 3" long x 1" wide x 1/8" thick Key code 1289 Standard key code or other colors, consult factory. xterior hardware 4 Ives rchitectural hardware products

175 ecorative surface bolts Universal strike Mortise strike 40 Surface bolt, decorative light duty Recommended for 1-3/8" and 1-3/4" hollow core doors or door partitions oncealed screw design enhances appearance and security xceptional strength and durability provided by interlocking construction of heavy gauge track and rod Permanent stop prevents rod disengagement from track Tension spring holds bolt in desired position Track assures smooth operation and interlocks with side edges of rod to eliminate marring ecorative 5/8" diameter knob designed to facilitate bolt operation vailable in 3", 4" and 6" lengths Units packed with wood screws Packed with both universal and mortise strikes ertifications Meets NSI/HM Made from extruded brass imensions Throw: 15/16" Projection: 3/4" Width: 11/16" Length: 3", 4" or 6" HM escription Substrate inish 605 right brass rass lackened brass rass Oil rubbed bronze rass Satin nickel rass right chrome rass Satin chrome rass e/716 ged bronze rass 643e/ Matte black rass LK or other colors, consult factory. 253 Surface bolt, decorative heavy duty Recommended for 1.3/4" or larger doors Heavy duty, decorative bolt ideal where extra strength required ecorative 1-1/4" diameter knob fits well with any décor and designed to facilitate bolt operation vailable in 8" and 12" lengths. Optional lengths available, consult factory. Units packed with wood screws Packed universal strike (US) & mortise strike (MS) Pulls &plates 5 ertifications Meets NSI/HM Made from solid brass imensions Throw: 1-1/8" Projection: 1-5/16" Half round rod: 5/8" Overall width: 1-5/8" Length: 8" or 12" HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin chrome rass 26 or other colors, consult factory. xterior hardware Universal strike Mortise strike Ives rchitectural hardware products 5

176 utch door & mortise door bolts 054 utch door bolt Practical, rugged, attractive bolt for application on dutch doors as well as other areas hamfered rod end draws the two leaves of door tightly together Sufficient tolerance provided in strike opening to allow for misalignment of door leaves and also prevents binding of bolt ecorative 1" diameter knob designed to facilitate bolt operation Units packed with wood screws Packed with Standard Strike (SS), Mortise Strike (MS) and Universal Strike (US) Pulls &plates ertifications Meets NSI/HM Made from solid brass imensions Throw: 5/8" Projection: 1-1/8" Half round rod: 5/8" Overall width: 1-5/8" Rod length: 4-1/4" Overall length: specify 4-3/8" (including knob) Standard strike Mortise strike Universal strike HM escription Substrate inish 605 right brass rass Satin brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass right chrome rass Satin chrome rass 26 or other colors, consult factory. 6 S48 Mortise door bolt rass oval turn knob and escutcheon Steel bolt for extra strength Rack is milled for precision fit with pinion Units packed with wood screws ertifications Meets NSI/HM Made from brass and steel imensions ackset: 1-3/4" olt throw: 1/2" olt diameter: 1/2" ase: 2-1/2" long x 9/16" diameter Strike: 1-3/4" high x 7/8" wide HM escription Substrate inish xterior hardware 605 right brass rass lackened brass rass Oil rubbed bronze rass Satin nickel rass right chrome rass Satin chrome rass 26 or other colors, consult factory. 6 Ives rchitectural hardware products

177 oor guards 481 hain door guard Permits the door to be slightly opened to allow viewing Narrow chain holder maintains chain in stationary position when door guard is not in use, eliminating marring of door and frame caused by dangling chain Welded twist link steel chain finished to match door plate and chain holder Packed with sheet metal screws ertifications Meets NSI/HM Made from wrought brass or burnished wrought steel - rass and steel HM escription Substrate inish imensions oor plate: 3-3/8" long x 1-3/8" wide hain holder: 2" high x 3/4" wide hain length: 6-1/4" 605 right brass rass Satin chrome rass right brass Steel Satin brass Steel lackened brass Steel Satin bronze Steel e/716 ged bronze Steel -643e/ Satin nickel Steel right chrome Steel Satin chrome Steel Matte black Steel -LK or other colors, consult factory. Pulls &plates ast brass ast aluminum 482 Solid bar door guard or use on doors that are flush with frames The solid bar, interlocking with the ball on the strike plate, permits the door to be slightly opened to allow viewing The hinged bar allows the door guard to be positioned 180 away from the door when not in use dge protection plate, furnished with cast brass door guards only, minimizes the chance for marring the door or frame. an be purchased as a separate item for luminum substrate Strike plate is designed to prevent the solid bar from marring the inside of the door when in use Packed with sheet metal screws ertifications Meets NSI/HM Made from cast brass or cast zinc vailable accessory items Shims available in US26 (626) only, 1/8" or 3/8" for brass only Plate - edge protection rass HM escription Substrate inish imensions - ast brass Strike plate: 2-5/8" high x 1-1/32" wide Holder: 1-3/4" high x 1-1/16" wide rm length: 4-3/4" dge guard: 1-1/8" high x 1-1/32" wide imensions - ast zinc Strike plate: 2-1/2" high x 7/8" wide Holder: 2-1/2" high x 15/16" wide rm length: 3-13/16" 605 right brass rass Satin brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass right chrome rass Satin chrome rass e/716 ged bronze rass -643e/ Matte black rass -LK Zinc HM escription Substrate inish 677 right brass Zinc Z lackened brass Zinc Z right chrome Zinc Z Satin chrome Zinc Z626 or other colors, consult factory. Ives rchitectural hardware products 7 7 xterior hardware

178 Roller latches Pulls &plates 8 xterior hardware 8 Ives rchitectural hardware products RL30 Roller latch RL30 Roller latch Recommended for higher traffic applications ctuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted using adjusting screws on the face of the unit Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller standard Units packed with wood and machine screws to meet most field conditions RL30 model packed with S strike ertifications Meets NSI/HM , vailable accessory items Strike - S Security mounting screws rass roller Silencers Made from forged brass HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass 643e/ Matte black rass LK or other colors, consult factory. imensions ody: 1-1/8" wide x 2-1/4" high x 2-1/4" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" thick, lip to center- 1-1/4" Optional S strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4" RL32 Roller latch RL32 Roller latch Recommended light duty cabinet and closet applications ctuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning knurled knob on back of latch. Maximum projection of the roller is 1/2" allowing for variance in the door clearance its heavy-duty cylindrical lock cutout Nylon roller standard Non-handed Units packed with wood screws RL32 model packed with S strike ertifications Meets NSI/HM , vailable accessory items Strike S Made from brass HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass 643e/ Matte black rass LK or other colors, consult factory. imensions ody: 1-1/8" wide x 2-1/4" high x 2-1/4" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" thick, lip to center - 1-1/4" Optional S strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4"

179 Roller latches RL36 Roller latch RL36 Roller latch Recommended light duty cabinet and closet applications ctuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning slotted screw on back of latch Maximum projection of the roller is 5/16" allowing for variance in the door clearance its cylindrical lock cutout Nylon roller Non-handed Units packed with wood screws RL36 model packed with S strike ertifications Meets NSI/HM , L57082 Made from stainless steel vailable accessory items Strike S HM escription Substrate inish 630 Satin stainless Stainless steel US32 or other colors, consult factory. imensions ody: 1" wide x 2-1/4" high x 2" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" Thick, lip to center- 1-1/4" Optional S strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4" Pulls &plates RL38 Roller latch Rim style roller latch ctuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning slotted screw Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller Non-handed Units packed with wood screws ertifications Meets NSI/HM , L27092 Made from stainless steel HM escription Substrate inish 630 satin stainless Stainless steel US32 or other colors, consult factory. imensions ody: 1-3/8" wide x 2" high x 7/8" deep Strike: 1" wide x 2-1/8" high x 3/8" deep 9 xterior hardware Ives rchitectural hardware products 9

180 Roller latches Pulls &plates 10 RL1152 Roller latch Recommended for higher traffic applications ombination of RL30 Roller Latch and ngle Stop ctuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjustable using adjusting screws on the face of the unit Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller standard orged brass construction Units packed with wood screws ertifications Meets NSI/HM , Made from forged brass vailable accessory items Security mounting screws rass roller Silencers Optional Strikes HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass 643e/ Matte black rass LK or other colors, consult factory. imensions ody: 1-1/2" wide x 4-1/2" high x 1-3/4" deep with 3/4" angle Strike: 1-1/8" wide x 2-1/4" high x 5/32" thick 1-11/16" 3/32" STK685 Strike imple of strike centered on strike STK685L Strike Location of strike dimple is variable Please specify location of dimple from edge of frame to centerline of the dimple - imple will be located + 3/16" to accommodate lip oth strikes: xterior hardware 10 STK685 STK685L 1-5/32" 2-1/4" Ives rchitectural hardware products ustom make strike for doors that swing both directions or use with roller latches Specify frame depth -. Overall strike length will be + 3/8" to accommodate 3/16" lip on each side Units packed with wood and machine screws to meet most field conditions Made from 3/32" brass HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. imensions Strike width: 2-1/4" Strike length: specified frame width + 3/8"

181 ngle stops S895 ngle stop Surface applied stop for single doors Large rubber bumper to ensure quiet operation Units packed with wood and machine screws to meet most field conditions Made from 1/8" brass vailable accessory items Security pin screws HM escription Substrate inish imensions 1-1/2" wide x 1" angle x 2-1/2" long 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. S18 ngle stop Surface applied stop for single and double doors Includes SR64 door silencers to ensure quiet operation SR64 silencers are replaceable Units packed with wood and machine screws to meet most field conditions Made from 3/16" brass vailable accessory items Security pin screws HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. imensions 1-1/2" wide x 3/4" angle x 3-1/2" long Pulls &plates 11 xterior hardware Ives rchitectural hardware products 11

182 Invisible latches Pulls &plates L11 Invisible latch Invisible latch is ideal for installations where no visible latch or strike is desired Unit can be installed at the top, bottom or side of the door an be mortised into the stop or surface mounted to the stop Recommended for use on small panels, cabinet doors or light weight closet doors Operation is simple, latching is accomplished by a slight push To unlatch the door, a harder push releases the door and pushes the door out rass and plastic construction pplies 13 pounds to open the door Units packed with wood screws ertifications Meets NSI/HM 156.9, Made from brass and plastic See finishes below vailable accessory items Security pin screws imensions ody: 1-1/4" wide x 1-7/8" high x 7/16" thick Strike: 9/16" wide x 1-5/16" high x 9/16" high 12 L12 Invisible latch Invisible latch is ideal for installations where no visible latch is desired Unit can be installed at the top, bottom or side of the door an be mortised into the stop or surface mounted to the stop Recommended for use on larger panels or regular size doors Operation is simple, latching is accomplished by a slight push To unlatch the door, a harder push releases the door and pushes the door out rass and plastic construction pplies 27 pounds to open the door Units packed with wood screws ertifications Meets NSI/HM 156.9, Made from brass and plastic See finishes below vailable accessory items Security pin screws imensions ody: 1-1/4" wide x 2-1/4" high x 9/16" thick Strike: 5/8" wide x 1-13/16" high x 9/16" projection xterior hardware L14 Invisible latch, auxiliary pusher id in the operation of the L11 and L12 where hinges or surrounding conditions prevent smooth operation of doors Provides 1-1/16" throw Nylon pusher pplies 10 pounds to open the door Units packed with wood screws ertifications Meets NSI/HM 156.9, Made from brass vailable accessory items Security pin screws imensions ody: 2-15/16" long x 1-11/16" wide x 5/8" deep See finishes below 11, 12 and 14 HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Satin chrome rass US26 or other colors, consult factory. 12 Ives rchitectural hardware products

183 all catches L21 all catch our-way catch with hexagon stud Ideal for holding medium duty doors The strike slides between two stainless steel balls that are under spring tension. s the strike engages, the door is held tightly shut Strike can enter body from any direction Spring tension is easily adjusted to suit field conditions ody can be surface applied or mortised Units packed with wood screws ertifications Meets NSI/HM Made from brass vailable accessory items Security pin screws HM escription Substrate inish 626 Satin chrome rass US26 or other colors, consult factory. L21 all catch imensions ody: 3/4" wide x 3" high x 3/4" deep Strike: 3/4" wide hex x 1-1/2" high our-way catch with plate type strike Ideal for closet doors, access doors, hinged openings and numerous other applications The strike slides between two stainless steel balls that are under spring tension. s the strike engages, the door is held tightly shut Strike can enter body from any direction Spring tension is easily adjusted to suit field conditions ody can be surface applied or mortised Units packed with wood screws ertifications Meets NSI/HM 156.9, Made from brass See finishes below L22 all catch vailable accessory items Security pin screws imensions ody: 3/4" wide x 3" high x 3/4" deep Strike: 7/16" wide x 1-3/4" high x 7/8" deep Three-way catch with plate type strike. Ideal for smaller cabinet doors or panels. The strike slides between two stainless steel balls that are under spring tension. s the strike engages, the door is held tightly shut. Strike can enter body from either side or front. Spring tension is easily adjusted to suit field conditions. ody can be surface applied or mortised. Units packed with wood screws ertifications Meets NSI/HM 156.9, Made from brass See finishes below L21 and L 22 vailable accessory items Security pin screws HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. imensions ody: 1/2" wide x 2-3/16" high x 1/2" deep Strike: 3/8" wide x 1-3/8" high x 5/8" deep Pulls &plates 13 xterior hardware Ives rchitectural hardware products 13

184 Magnetic catches Pulls &plates Magnetic catch ouble pole Self aligning magnet ensures maximum pull ase design allows easy magnet adjustment on cabinet or small door applications. Packed with sheet metal screws 5 lbs. load capacity ertifications Meets NSI/HM 156.9, ase made from aluminum HM escription Substrate inish 666 right brass luminum luminum clear coat luminum 92 or other colors, consult factory. 326 Magnetic catch, dual double pole ual double pole Self-aligning magnets ensure maximum pull an be surface mounted or mortised Packed with sheet metal screws, 2 short strikes and 1 long strike 9 lbs. load capacity ertifications Meets NSI/HM 156.9, ase made from aluminum HM escription Substrate inish imensions ase: 1-1/8" wide x 2-1/16" long x 5/8" thick imensions ase: 1" wide x 3-1/8" long x 9/16" thick 666 right brass luminum luminum clear coat luminum 92 or other colors, consult factory. 327 Magnetic catch, dual triple pole xterior hardware ual triple pole Self-aligning magnets insure maximum pull an be surface mounted or mortised. Packed with sheet metal screws, 2 short strikes and 1 long strike 14 lbs. load capacity ertifications Meets NSI/HM 156.9, ase made from aluminum HM escription Substrate inish 666 right brass luminum luminum clear coat luminum 92 or other colors, consult factory. imensions ase: 1" wide x 3-1/8" long x 3/4" thick 14 Ives rchitectural hardware products

185 Roller catches 330 Roller catch Most economical solution recommended for low frequency opening applications Independent rollers allow positive action and self-alignment ushioned rollers absorb shock and noise, hold door away from cabinet pplication allows for easy adjustment Packed with screws and brads ertifications Meets NSI/HM 156.9, Made from wrought steel imensions ase: 1-1/4" high x 11/16" wide Strike: 1-1/4" high x 3/8" wide HM escription Substrate inish 604 lear zinc Steel 2 or other colors, consult factory. 335 Roller catch Recommended for higher frequency opening applications Smooth, positive latching action insured by powerful conical spring urable nylon roller insures quiet operation djustable tension. djustments can be varied from 4 to 17 lbs. of holding power making possible a wide range of door performance asily installed on thin doors ull lip style strike designed for simplified mortising Packed with sheet metal screws Pulls &plates ertifications Meets NSI/HM , L27081 for brass and L87081 for steel Made from wrought brass See finishes below 336 Roller catch imensions ace plate: 7/8" wide x 2-1/4" high ore: 1-3/4" deep x 13/16" diameter Strike: 1-5/8" wide x 2-1/4" high, lip to center- 1-3/16" 15 Recommended for higher frequency opening applications Smooth, positive latching action insured by powerful conical spring urable nylon roller insures quiet operation djustable tension. djustments can be varied from 4 to 17 lbs of holding power making possible a wide range of door performance asily installed on thin doors Standard box type strike designed for neat appearance Packed with sheet metal screws ertifications Meets NSI/HM , L27081 for brass and L87081 for steel Made from wrought brass See finishes below 335 and 336 HM escription Substrate inish imensions ace plate: 7/8" wide x 2-1/4" high ore: 13/16" diameter x 1-3/4" deep Strike: 7/8" wide x 2-1/4" high, lip to center- 1-1/8" 605 right brass rass Satin brass rass lackened brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass right chrome rass Satin chrome rass e/716 ged bronze rass 643e/ Matte black rass LK or other colors, consult factory. Ives rchitectural hardware products 15 xterior hardware

186 all catches Pulls &plates 345 all catch, adjustable Recommended for lower frequency opening applications Ideal for cabinets and small interior doors ree rolling ball insures smooth, positive and trouble-free action djustable threaded barrel compensates for various door clearances djustable spring tension Units packed with wood screws ertifications Meets NSI/HM 156.9, Made from wrought brass imensions ace plate: 3/4" wide x 1-1/2" high ore: 1" deep x 9/16" diameter Strike: 25/32" wide x 1-1/2" high, lip to center- 13/32" HM escription Substrate inish 605 right brass rass US3 609 lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. 16 xterior hardware 347 all catch, dual adjustable - square corners Recommended for lower frequency opening applications Ideal for cabinets and small interior doors ree rolling ball insures smooth, positive and trouble-free action djustable threaded barrel compensates for various door clearances djustable spring tension Rounded corners on strike lip for safety Units packed with wood screws ertifications Meets NSI/HM 156.9, Made from wrought brass imensions ace Plate: 1" wide x 2-1/8" high ore: 7/8" diameter x 1-3/8" deep Strike: 1-3/8" wide x 2-1/8" high, lip to center- 7/8" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US3 609 lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass 643e/ Matte black rass LK or other colors, consult factory. 16 Ives rchitectural hardware products

187 all catches 349 all catch, dual adjustable - rounded corners Recommended for lower frequency opening applications or catch in door installations Radiused corners allow easy installation with a router ual adjustment for door clearance and holding strength Lip strike is designed for use where strike is mounted in jamb ree rolling ball insures smooth, positive and trouble-free action djustable threaded barrel compensates for various door clearances djustable spring tension Rounded corners on strike lip for safety Units packed with wood screws ertifications Meets NSI/HM 156.9, Made from wrought brass imensions ace Plate: 1" wide x 2-1/8" high ore: 7/8" diameter x 1-3/8" deep Strike: 1-3/8" wide x 2-1/8" high, lip to center- 7/8" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US3 609 lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 643e/716 ged bronze rass 643e/ Matte black rass LK or other colors, consult factory. 2 lbow atch Ideal for use on the inactive leaf of a pair of cabinet doors Surface applied, making installation simple Made from cast aluminum ertifications Meets NSI/HM imensions Plate: 1-3/8" high x 5/8" wide Strike: 13/16" high x 5/8" wide - luminum Ives Number HM Pulls &plates 17 xterior hardware Ives rchitectural hardware products 17

188 Notes xterior hardware 18 Pulls &plates 18 Ives rchitectural hardware products

189 oor stops Table of contents loor stops S13 ome stop... 2 R14 ome stop rise... 2 S17 ome stop... 2 S436 ome stop... 3 S438 ome stop... 3 R435 Riser for S436 ome stop... 3 R437 Riser for S438 ome stop... 3 S439 Universal dome floor stop...4 S410 ecorative floor stop...4 S18S loor stop - 1 1/2"... 5 S18L loor stop - 3 1/2"... 5 S434 loor stop loor door stop... 5 S441 loor stop...6 S444 loor stop - masonry...6 S448 loor stop - drywall/wood...6 loor stops & holders S9 loor stop & semi-automatic holder... 7 S40 loor stop & automatic holder... 7 S S S S446 loor stop & manual door holder - masonry...8 S450 loor stop & manual door holder - drywall/wood...8 S495 Wall stop & automatic holder...8 S496 loor stop & automatic holder - 3/8" max clearance...8 S497 loor stop & automatic holder - 1" max clearance...8 Wall stops/bumpers WS11 Wall stop - drywall/wood...9 WS11X Wall stop - masonry...9 WS20 Manual wall holders - drywall/wood...9 WS20X Manual wall holders - masonry...9 WS33 Wall stops - drywall/wood WS33X Wall stops - masonry WS65 Wall stop WS401/402VX (onvex) wall bumpers...11 WS401/402V (oncave) wall bumpers...11 WS404VX (onvex) wall bumpers...11 WS406/407VX (onvex) wall bumpers...12 WS406/407V (oncave) wall bumpers R-W Wall bumper - adhesive...12 Wall stops & holders WS443 Wall stop - masonry...13 WS447 Wall stop - drywall/wood...13 WS445 Manual wall holder - masonry...13 WS449 Manual wall holder - drywall/wood...13 utomatic wall holders WS40 utomatic wall holder WS45 utomatic wall holder - drywall/wood WS45X utomatic wall holder - masonry Kick down holders S452 Kick down holder...15 S455 4" Kick down holder S544 4" Kick down holder S555 5" Kick down holder Plunger type door holders S1153 Plunger type door holder...17 S1154 Plunger type door holder...17 Roller bumpers R470 Offset roller bumper R /2" Roller bumper R472 6" Roller bumpers Residential door stops 060 3" lexible door stops " lexible door stops /4" ase door stops /8" ase door stops lexible door stops ase door stop Hinge pin door stops Hinge pin door stops Hinge pin door stops Hinge pin door stops...24 oor silencers SR64 oor silencer - metal...25 SR65 oor silencer - wood...25 SR66 oor silencer - adhesive...25 rash stop S115 rash stop...26 Pulls &plates 1 xterior hardware Ives rchitectural hardware products 1

190 loor stops dome Pulls &plates S13 ome stop Standard S13 for use where no threshold is used Heavy-duty cast dome stops constructed of brass Unique riser design of R14 (below) allows easy conversion to threshold application Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete Replaceable- grey rubber bumper ertifications Meets NSI/HM , L12141 Made from cast brass vailable accessory items Security pin screws rey rubber bumper imensions Overall height: 1" ase height: 5/32" ase diameter: 1-3/4" See finishes below R14 ome stop rise dapts the S13 ome stop to threshold use. Made from cast brass See finishes below imensions Riser height: 5/16" ase diameter: 1-3/4" round 2 S17 ome stop One piece dome stop for use with thresholds Heavy-duty cast dome stops constructed of brass Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete rey rubber bumper ertifications Meets NSI/HM , L12161 Made from cast brass vailable accessory items Security pin screws rey rubber bumper imensions Overall height: 1-11/32" ase height: 1/2" ase diameter: 1-3/4" round See finishes below xterior hardware S13, R14 and S17 HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. 2 Ives rchitectural hardware products

191 loor stops dome S436 S438 S436 ome stop S438 ome stop S436 for doors without threshold S438 for doors with threshold or undercut doors Heavy-duty cast dome stops Packed with fasteners for light duty masonry and wood applications rey rubber bumper ertifications S436 Meets NSI/HM , L12141 for brass and L32141 for aluminum S438 Meets NSI/HM , L12161 for brass and L32161 for aluminum Made from cast brass or aluminum vailable accessory items Security pin screws - rass imensions S436 Overall height: 1" ase height: 3/16" ase diameter: 1-3/4" x 2" oval S438 Overall height: 1-3/8" ase height: 9/16" ase diameter: 1-3/4" x 2" oval HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 609 lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 - luminum HM escription Substrate inish 628 Satin aluminum luminum US28 or other colors, consult factory. Pulls &plates 1" R435 Riser for S436 ome stop R437 Riser for S438 ome stop R435 for conversion of S436 ome stop to carpet installation R437 or conversion of S438 ome stop to carpet installation Packed with fasteners for heavy duty masonry and wood applications Made from aluminum, mill finish imensions ase diameter: 1" X 1-7/16" oval Heights: available in 1/4", 3/8", 1/2" 5/8", 3/4" and 1" height 3 xterior hardware P LOOR 1-7/16" 1" OR LSS Ives rchitectural hardware products 3

192 loor stops Pulls &plates 4 xterior hardware S439 Universal dome floor stop High or low-rise mount Spring-loaded rubber contact Packed with fasteners for light duty masonry and wood applications rey rubber bumper ertifications Meets NSI/HM Made from cast zinc or stainless steel vailable accessory items Replaceable rubber bumper - Zinc S410 imensions Overall height: 1-1/2" Pad height: 1-1/8" ase height: 1/4" ase diameter: 1-7/8" HM escription Substrate inish 676 Matte black Zinc LK 677 right brass Zinc US3 678 Satin brass Zinc US4 704 Oil rubbed bronze Zinc US Satin nickel Zinc US right chrome Zinc US Satin chrome Zinc US ged bronze Zinc 643e/716 - Stainless steel HM escription Substrate inish 630 Satin Stainless Stainless steel US32 or other colors, consult factory. ecorative floor stop Non-directional Packed with fasteners for light duty masonry and wood applications. lack rubber ring ertifications Meets NSI/HM Made from cast brass vailable accessory items Replaceable rubber bumper imensions Overall height: 1-1/2" umper thickness: 1/4" iameter: 1-1/4" HM escription Substrate inish 605 right brass rass US3 619 Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 or other colors, consult factory. 4 Ives rchitectural hardware products

193 loor stops S18S loor stop - 1 1/2" S18L loor stop - 3 1/2" Security door stops designed for use in high vandalism areas Molded from black flame resistant, resilient material around a heavy-duty stud Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed Ideal for jail or security cell areas where floor mounted stops are required S18L also ideal for concrete wall applications S18S S18L Made from rubber lack rubber imensions S18S Height: 1-1/2" S18S iameter: 2" S18S Stud length: 2-1/2" S18L Height: 3-1/2" S18L iameter: 2" S18L Stud length: 2-1/2" S434 loor stop or undercut doors up to 1-1/2" Packed with fasteners for light duty masonry and wood applications Soft, resilient black rubber Made from wrought steel vailable accessory items Replaceable soft, resilient black rubber. imensions Overall height: 2-5/8" ase size: 1-1/2" W x 2-3/4" L Pulls &plates HM escription Substrate inish 604 Zinc Plated Steel US2 430 loor door stop or undercut doors up to 1-1/2". Welded wood screws for wood applications. White rubber tip Made from cast brass and aluminum vailable accessory items Replaceable white tips lack rubber tips imensions Overall height: 1-5/16" ase diameter: 1-1/4" 5 - rass HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 609 lackened brass rass US5 613 Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 xterior hardware - luminum HM escription Substrate inish 666 right brass luminum lackened brass luminum right nickel luminum luminum clear coat luminum 92 or other colors, consult factory. Ives rchitectural hardware products 5

194 loor stops Pulls &plates 6 xterior hardware 6 S444 Ives rchitectural hardware products S441 loor stop ccommodates door undercut up to 1-1/2" esigned to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts rey non-marring rubber bumper Packed with fasteners for heavy duty masonry and wood applications ertifications Meets NSI156.16, L12131 Made from cast brass vailable accessory items Replaceable grey non-marring rubber bumper - Zinc imensions Overall height: 2-1/8" Overall length: 2-7/8" ase depth: 1-5/8" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 609 lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 or other colors, consult factory. S444 loor stop - masonry S448 loor stop - drywall/wood Ideal for interior or exterior use ccommodates door undercut up to 2-1/2" Replaceable black non-marring rubber tip S444 is packed with fasteners for heavy duty masonry applications S448 is packed with fasteners for drywall/wood applications ertifications S444 Meets NSI/HM , L12131 for brass S448 Meets NSI/HM , L12121 for brass and L32121 for aluminum Made from cast brass and aluminum vailable accessory items Replaceable black non-marring rubber bumper - rass imensions Overall height: 3" ase diameter: 2-1/2" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 609* lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 - luminum HM escription Substrate inish 628* Satin aluminum luminum US28 or other colors, consult factory. * Not available on S444.

195 loor stops & holders 1-3/4 1/8 LRN 1-3/16 SI VIW OY 1/2 40 MX. OOR LRN LRN ROM 9/16 to 1-1/16 S9 loor stop & semi-automatic holder Semi-automatic floor-mounted holders accommodates with door to floor clearance of 1-1/2" or less ctivate holder by flipping the engagement tongue forward. When door is opened, the hook (mounted on door) engages the tongue. To release, push firmly on door to disengage tongue Packed with fasteners for extra-heavy duty masonry and wood applications ertifications Meets NSI/HM , L11241 Made from cast brass 2-1/4 LRN ROM 1-1/8 to 1-9/16 S41 S42 S43 vailable accessory items Security pin screws Replaceable hook package imensions Overall height: 3-1/2" ase dimensions: 2" wide x 3-1/2" long HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. S40 loor stop & automatic holder S41 S42 S43 utomatic door holders ideal for heavy-traffic situations that require a simple, foolproof, Hold-open device Unit is activated automatically when door is opened. firm pull on door releases the mechanism Strikes accommodate different door to floor clearances Model numbers are determined by strike/door-to-floor clearances Holder position on door is adjustable Packed with fasteners for heavy duty masonry and wood applications ertifications Meets NSI/HM , L11301 Made from forged brass vailable accessory items Strike Packages imensions oor to floor clearance: S40 1/2" or less S41 9/16" to 1-1/16" S42 1-1/8" to 1-9/16" S43 1-5/8" to 2-1/16" Holder dimensions: 3" wide x 3-11/16" high HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. 2-3/4 LRN ROM 1-5/8 to 2-1/16 Ives rchitectural hardware products 7 Pulls &plates 7 xterior hardware

196 loor stops & holders Pulls &plates 8 xterior hardware 8 S446 S495 Ives rchitectural hardware products S446 loor stop & manual door holder - masonry S450 loor stop & manual door holder - drywall/wood Manual type floor holder ideal for interior or exterior use ccommodates door undercut up to 2-1/2" Replaceable black non-marring rubber tip Unit functions as a stop but serves as a hold-open device when hook is manually engaged in strike. Unit requires manual disengagement to release hold-open S446 is packed with fasteners for heavy duty masonry applications S450 is packed with fasteners for drywall/wood applications ertifications S446 Meets NSI/HM , L11371 for brass and L31371 for aluminum S450 Meets NSI/HM , L11361 for brass and L31361 for aluminum Made from cast brass and aluminum vailable accessory items Replaceable black non-marring rubber bumper - rass HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 - luminum HM escription Substrate inish 628 Satin aluminum luminum US28 or other colors, consult factory. imensions Overall height: 3-3/4" Height from floor to stop center line: 2-5/8" Stop diameter: 1-1/16" ase diameter: 2-1/12" S495 Wall stop & automatic holder S496 loor stop & automatic holder - 3/8" max clearance S497 loor stop & automatic holder - 1" max clearance utomatic door holders ideal for heavy-traffic situations that require a simple, holdopen device Recommended installation is holder on door and strike on wall Holder position on door is adjustable Holder is tapered to prevent child riding Packed with fasteners for heavy duty masonry and drywall/wood applications ertifications S495 Meets NSI/HM , L11291 for brass S496 Meets NSI/HM , L11301 for brass S497 Meets NSI/HM , L11301 for brass Made from cast brass imensions S495 Holds door 3-3/4" from wall. S496 oor to floor clearances 3/8" maximum. S497 oor to floor clearances 1" maximum HM escription Substrate inish 605 right brass rass US3 606* Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. * Not available on S496 and S497.

197 Wall stops WS11 WS11 Wall stop - drywall/wood WS11X Wall stop - masonry Hexagon section on unit aids in fastening unit when expansion shield is used Replaceable black rubber bumpers features off-set shoulder and threaded shank that screws into body of unit WS11 is packed with fasteners for drywall/wood applications WS11X is packed with fasteners for heavy duty masonry applications ertifications WS11 Meets NSI/HM , L12011 WS11X Meets NSI/HM , L12021 Made from cast brass vailable accessory items Security pin screws Replaceable black non-marring rubber bumper imensions ase diameter: 2" Overall projection: 3-3/4" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. Pulls &plates WS20 WS20 Manual wall holders - drywall/wood WS20X Manual wall holders - masonry Hexagon section on unit aids in fastening unit when expansion shield is used Replaceable black rubber bumpers feature off-set shoulder and threaded shank that screws into body of holder Hinged strike furnished matches body material and finish WS20 is packed with fasteners for drywall/wood applications WS20X is packed with fasteners for heavy duty masonry applications ertifications WS20 Meets NSI/HM , L11341 for brass and L31341 for aluminum WS20X Meets NSI/HM , L11351 for brass and L31351 for aluminum Made from cast brass or aluminum vailable accessory items Security pin screws Replaceable black non-marring rubber bumper - rass imensions ase diameter: 2-3/8" Overall projection: 4" Strike height: 2" Strike width: 1" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 - luminum HM escription Substrate inish 628 Satin aluminum luminum US28 or other colors, consult factory. 9 xterior hardware Ives rchitectural hardware products 9

198 Wall stops Pulls &plates 10 WS33 WS33 Wall stops - drywall/wood WS33X Wall stops - masonry Replaceable rubber bumper with offset shoulder screws into cavity on body to prevent loss or theft Sloping design discourages vandalism WS33 is packed with fasteners for drywall/wood applications. WS33X is packed with fasteners for heavy duty masonry applications ertifications WS33 Meets NSI/HM , L12011 WS33X Meets NSI/HM , L12021 Made from cast brass WS65 Wall stop Replaceable non-marring white rubber bumper Packed with fasteners for wood applications Made from cast aluminum vailable accessory items Replaceable white non-marring rubber bumper Replaceable black non-marring rubber bumper vailable accessory items Security Pin screws Replaceable black non-marring rubber bumper imensions ase diameter: 2-1/4" wide x 3" high Overall projection: 3-3/4" HM escription Substrate inish 626 Satin chrome rass US26 or other colors, consult factory. imensions ase diameter: 1-5/8" Overall projection: 3-3/4" HM escription Substrate inish 666 right brass luminum US3 668 Satin bronze luminum US Oil rubbed bronze luminum US lear satin aluminum luminum US27 or other colors, consult factory. xterior hardware 10 Ives rchitectural hardware products

199 Wall bumpers WS401V & WS402V WS401/402VX (onvex) wall bumpers WS401/402V (oncave) wall bumpers onstructed in heavy-duty cast brass Special retainer ring makes rubber tamper resistant rey rubber bumper WS401/402VX convex rubber bumper, packed with fasteners for drywall/wood applications WS401/402V concave rubber bumper which avoids damage to locks with projecting buttons, packed with fasteners for drywall/wood applications ertifications WS401/402VX Meets NSI/HM , L12101 WS401/402V Meets NSI/HM , L12251 Made from cast brass - rass imensions ase diameter: 2-1/2" ase thickness: 3/8" Overall projection: 1" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. WS404VX (onvex) wall bumpers ompact size onstructed in cast brass Totally concealed mounting discourages vandalism or tampering Unit furnished with grey convex rubber bumper Packed with fasteners for drywall/wood applications Made from cast brass - rass imensions ase diameter: 1" Overall projection: 17/32" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 609 lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 or other colors, consult factory. Pulls &plates 11 xterior hardware Ives rchitectural hardware products 11

200 Wall bumpers Pulls &plates WS406VX & WS407VX WS406/407VX (onvex) wall bumpers WS406/407V (oncave) wall bumpers onstructed in sturdy yet economical wrought base of brass or stainless steel construction eature concealed tamper-proof mounting Shipped factory preassembled backplate to reduce installation cost asy installation by inserting screwdriver through small hole in rubber WS406/407VX convex rubber bumper, packed with fasteners for drywall/wood applications WS406/407V concave rubber bumper which avoids damage to locks with projecting buttons, packed with fasteners for drywall/wood applications ertifications WS406/407VX Meets NSI/HM , L22201 for brass and L52201 for stainless steel WS406/407V Meets NSI/HM , L22251 for brass and L52251 for stainless steel Made from brass and stainless steel - rass imensions ase diameter: 2-1/2" ase thickness: 3/8" Overall projection: 1" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 609 lackened brass rass US5 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 - Stainless steel HM escription Substrate inish 630 Stainless steel Stainless steel US32 or other colors, consult factory. 12 xterior hardware 411R-W Wall bumper - adhesive dhesive-backed wall door stop for use on clean, smooth, flat surfaces only Non-marring white rubber oncave design permits knob to strike stop without damaging or engaging lock mechanism Made from rubber imensions ase diameter: 1-7/8" ase thickness: 3/8" Overall projection: 1-1/16" HM escription Substrate inish --- White Rubber R-W 12 Ives rchitectural hardware products

201 Wall stops & holders WS443 WS445 WS443 Wall stop - masonry WS447 Wall stop - drywall/wood Ideal for interior or exterior use Replaceable black non-marring rubber tip WS443 is packed with fasteners for heavy duty masonry applications WS447 is packed with fasteners for drywall/wood applications ertifications WS443 Meets NSI/HM , L12021 for brass and L32021 for aluminum WS447 Meets NSI/HM , L12011 for brass and L32011 for aluminum Made from cast brass vailable accessory items Replaceable black non-marring rubber bumper - rass HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 or other colors, consult factory. - rass HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 - luminum HM escription Substrate inish 628* Satin aluminum luminum US28 or other colors, consult factory. *Only available on WS449. imensions ase diameter: 2-1/4" Overall projection: 3-11/16" WS445 Manual wall holder - masonry WS449 Manual wall holder - drywall/wood Unit functions as a stop but serves as a hold-open device when hook is manually engaged in strike Unit requires manual disengagement to release hold-open Replaceable black non-marring rubber tip WS445 is packed with fasteners for heavy duty masonry applications WS449 is packed with fasteners for drywall/wood applications ertifications WS445 Meets NSI/HM , L11351 for brass WS449 Meets NSI/HM , L11341 for brass and L31341 for aluminum Made from cast brass or aluminum vailable accessory items Replaceable black non-marring rubber bumper imensions ase diameter: 2-1/4" ase projection: 3-11/16" ngaged projection: 5-3/4" Strike height: 1-1/2" Strike width: 13/16" Strike projection: 13/16" Ives rchitectural hardware products 13 Pulls &plates 13 xterior hardware

202 utomatic wall holders Pulls &plates 14 xterior hardware 14 WS45 Ives rchitectural hardware products WS40 utomatic wall holder Holder is mounted on wall and strike is mounted on door Roller on holder rides up seats itself on strike, with a heavy duty bumper pad deadening the sound and shock Packed with fasteners for light duty masonry and drywall/wood applications ertifications Meets NSI/HM , L11291 for brass, and L31291 for aluminum Made from cast brass or aluminum vailable accessory items Security pin screw Hook package - rass imensions ase height: 2" ase width: 2-1/2" ase projection: 2-1/4" ngaged projection: 3-1/2" Strike height: 2-1/16" Strike width: 3/4" Strike projection: 2" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 - luminum HM escription Substrate inish 628 Satin aluminum luminum US28 or other colors, consult factory. WS45 utomatic wall holder - drywall/wood WS45X utomatic wall holder - masonry Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position heavy rubber pad cushions the shock and absorbs the sound With unit mounted on door and the strike on wall, vertical adjustment is available on body The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date. WS45 is packed with fasteners for drywall/wood applications. WS45X is packed with fasteners for heavy duty masonry applications ertifications WS45 Meets NSI/HM , L11291 for brass and L31291 for aluminum WS45X Meets NSI/HM , L11291 for brass and L31291 for aluminum Made from cast brass or aluminum vailable accessory items Security pin screw Hook package - rass imensions ase height: 3-11/16" ase width: 3" ase projection: 2" ngaged projection: 3-7/16" Strike diameter: 2-3/8" Strike projection: 3" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 - luminum HM escription Substrate inish 628 Satin aluminum luminum US28 or other colors, consult factory.

203 Kick down holders S452 Kick down holder Units provide simple hold and release, activated with a touch of the foot Stainless steel spring Replaceable black non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications S452-4 has a door-to-floor clearance of 2" or less S452-5 has a door-to-floor clearance up to 3" ertifications Meets NSI/HM , L11383 for brass and L31383 for aluminum Made from cast brass or aluminum vailable accessory items Replaceable black non-marring rubber shoes - rass imensions S452-4 oor-to-floor clearance: 2" or less S452-5 oor-to-floor clearance: up to 3" S452-4 Plate height: 2-1/8 S452-5 Plate height: 2-1/8" S452-4 Plate width: 1" S452-5 Plate width: 1" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 - luminum HM escription Substrate inish 628 Satin aluminum luminum US28 or other colors, consult factory. *vailable in 4" only. Pulls &plates 15 xterior hardware Ives rchitectural hardware products 15

204 Kick down holders Pulls &plates 16 xterior hardware 16 S544 Ives rchitectural hardware products S455 4" Kick down holder Units provide simple hold and release, activated with a touch of the foot. Stainless steel spring Replaceable black non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications oor-to-floor clearances of 2" or less ertifications Meets NSI/HM , L11382 for brass and L31382 for aluminum Made from cast brass or aluminum vailable accessory items Replaceable black non-marring rubber shoes - rass imensions oor-to-floor clearance: 2" or less Plate height: 1-3/4" Plate width: 1-3/4" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US Satin nickel rass US Matte black rass LK 625 right chrome rass US Satin chrome rass US ged bronze rass 643e/716 - luminum HM escription Substrate inish 628 Satin aluminum luminum US right brass luminum US3L --- lackened brass luminum US5L 668 Satin bronze luminum US10L --- lear satin aluminum luminum US27 or other colors, consult factory. S544 4" Kick down holder S555 5" Kick down holder Units provide an economical method to hold open doors. Stainless steel spring Replaceable grey non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications S544 for door-to-floor clearances of 2" or less S555 for door-to-floor clearances up to 3" ertifications S544 Meets NSI/HM , L11381 S555 Meets NSI/HM , L11391 Made from cast iron vailable accessory items Replaceable grey non-marring rubber shoes imensions S544 oor-to-floor clearance: 2" or less Plate height: 2-1/4" Plate width: 1-7/16" S555 oor-to-floor clearance: up to 3" Plate height: 2-1/4" Plate width: 1-7/16" HM escription Substrate inish 706 rass painted Iron SP4 691 ronze painted Iron SP luminum painted Iron SP ark bronze painted Iron SP Matte black Iron LK or other colors, consult factory.

205 Plunger type door holders S1153 Plunger type door holder Provides a contemporary yet economical method of positive hold-open. Spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever. Provides a 1-5/8" throw for all types of doors. Ribbed grey non-marring rubber shoe is securely fastened to unit with a screw and is easily replaced when worn. Packed with fasteners for wood applications ertifications Meets NSI/HM , L11401 Made from cast brass vailable accessory items Replaceable grey non-marring rubber shoes - luminum HM escription Substrate inish 628 Satin aluminum luminum US28 or other colors, consult factory. S1154 Plunger type door holder imensions Height: 5-1/2" Width: 2" epth: 1-1/4" Plunger and internal parts are plated steel and provides a 1-1/4" throw for all types of doors. Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever. Round non-marring rubber shoe is securely fastened with a screw in flanged cup to prevent movement or loss. When worn, shoes are easily replaced. Packed with fasteners for wood applications. ertifications Meets NSI/HM , L31401 Made from cast aluminum vailable accessory items Replaceable grey non-marring rubber shoes imensions Height: 6-1/4" Width: 1-1/2" epth: 1-7/16" HM escription Substrate inish 605 right brass rass US3 606 Satin brass rass US4 612 Satin bronze rass US Oil rubbed bronze rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. Pulls &plates 17 xterior hardware Ives rchitectural hardware products 17

206 Roller bumpers R470 R470 Offset roller bumper R /2" Roller bumper R472 6" Roller bumpers R470 Offset roller bumper. Used where two doors open against each other to prevent damage to the doors or hardware R471 and R472 Straight roller bumpers. Ideal for use in situations where doors meet each other at approximate right angles (back to back) rey rubber roller Packed with fasteners for wood applications Pulls &plates R471 Offset ertifications R470 Meets NSI/HM , L12212 R471 Meets NSI/HM , L12192 R472 Meets NSI/HM , L12202 Made from cast brass vailable accessory items Replaceable grey non-marring rubber shoes imensions R470 ase size: 1-11/16" x 2-1/4" R470 rm offset: 2-3/4" R470 Length: 5" R471 ase diameter: 2" R471 Length: 4-1/2" R472 ase diameter: 2" R472 Length: 6" HM escription Substrate inish 605 right brass rass US3 606** Satin brass rass US4 612* Satin bronze rass US10 613* Oil rubbed bronze rass US10 619* Satin nickel rass US right chrome rass US Satin chrome rass US26 or other colors, consult factory. *Only available on R472. **Only available on R471 and R472. xterior hardware 18 R Ives rchitectural hardware products

207 Residential door stops 060 3" lexible door stops 061 4" lexible door stops Utilizes heavy gauge spring to maintain rigid protections Simple to install - only a screwdriver required Packed disassembled for quick installation White rubber tip Packed with fasteners for wood applications ertifications Meets NSI/HM Made from steel vailable accessory items Replaceable white rubber tip available imensions ase diameter: 1" Tip diameter: 19/16" 060 3" Projection 061 4" Projection HM escription Substrate inish 631 Matte black Steel -LK 632 right brass Steel lackened brass Steel Satin bronze Steel Oil rubbed bronze Steel right nickel Steel ged bronze Steel -643/ Satin nickel Steel right chrome Steel Satin chrome Steel ** White Steel -W or other colors, consult factory. **Only available on 061. Pulls &plates 19 xterior hardware Ives rchitectural hardware products 19

208 Residential door stops Pulls &plates 20 xterior hardware luminum and brass substrate Zinc substrate /4" ase door stops /8" ase door stops Simple to install - only a screwdriver required Packed disassembled for quick installation vailable in three sizes to accommodate varying areas of installation and door trim dimensions White rubber tip. Note: /716 ships with black rubber tips Welded fastener for wood applications Made from brass, aluminum, or zinc vailable accessory items Replaceable white rubber tip available Replaceable black rubber tip available - rass imensions /4" Projection, base diameter: 1", Tip diameter: 5/8" 61 rass and alum 3-1/8" projection, base iameter: 7/8", tip diameter: 5/8" 61 Zinc 2-7/8" projection, base diameter: 1", tip diameter: 5/8" HM escription Substrate inish 605 right brass rass Satin brass rass lackened brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass * lackened nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum 3 ---* lackened brass luminum 5 668* Satin bronze luminum Oil rubbed bronze luminum right nickel luminum Satin nickel luminum right hrome luminum Satin hrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK ---* White luminum -W - Zinc HM escription Substrate inish ---* Satin nickel Zinc Z * ged bronze Zinc Z-643e/716 or other colors, consult factory. *Only available on Ives rchitectural hardware products

209 Residential door stops 63 lexible door stops Utilizes heavy gauge spring to maintain rigid protections Simple to install - only a screwdriver required Packed disassembled for quick installation White rubber tip Packaged with fastener for wood applications Made from wrought steel vailable accessory items Replaceable white rubber tip available Replaceable black rubber tip available imensions ase diameter: 1" Tip diameter: 9/16" Projection: 3" HM escription Substrate inish 631 Matte black Steel -LK 632 right brass Steel lackened brass Steel ged bronze Steel -643/ Satin nickel Steel right chrome Steel Satin chrome Steel White Steel -W or other colors, consult factory. 64 ase door stop ase door stop features deluxe one-piece styling asily screws into base esigned with hexagonal head to accommodate wrench or pliers when installing White rubber tip Packaged with fastener for wood applications Made from solid brass or aluminum vailable accessory items Replaceable white rubber tip available Replaceable black rubber tip available - rass imensions ase diameter: 1" Tip diameter: 9/16" Projection: 3-1/4" HM escription Substrate inish 605 right brass rass Satin brass rass lackened brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum Oil rubbed bronze luminum luminum clear coat luminum 92 or other colors, consult factory. Pulls &plates 21 xterior hardware Ives rchitectural hardware products 21

210 Residential door stops Pulls &plates 69 Hinge pin door stops conomical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable djustable for 70 to 100 oor Openings Positive slip proof adjustment White non-marring rubber tips Removable bushings accommodate 1/4 to 5/16 diameter hinge pins asy installation only a screwdriver required Made from burnished wrought steel vailable accessory items Replaceable white rubber tip available imensions ase diameter: 1" Tip diameter: 9/16" Projection: 3-1/4" HM escription Substrate inish 631 Matte black Steel -LK 632 right brass Steel lackened brass Steel Satin bronze Steel Oil rubbed bronze Steel right nickel Steel ged bronze Steel -643/ Satin nickel Steel right nickel Steel right chrome Steel Satin chrome Steel 26 or other colors, consult factory. xterior hardware Ives rchitectural hardware products

211 Residential door stops luminum substrate rass and zinc substrate 70 Hinge pin door stops conomical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable esigned for narrow trim installation High quality rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4" to 5/16" diameter hinge pins asy installation White rubber and nylon tips (Note: ships with black rubber tips) Made from brass, aluminum, or zinc vailable accessory items Replaceable white rubber tip available - rass HM escription Substrate inish 605 right brass rass Satin brass rass lackened brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum Satin brass luminum lackened brass luminum Satin bronze luminum Oil rubbed bronze luminum right nickel luminum Satin nickel luminum right hrome luminum Satin hrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK --- White luminum -W - Zinc HM escription Substrate inish --- ark bronze Zinc Z ged bronze Zinc Z-643e/716 or other colors, consult factory. Pulls &plates 23 xterior hardware Ives rchitectural hardware products 23

212 Residential door stops Pulls &plates 72 Hinge pin door stops conomical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable 85 to 125 oor opening adjustments esigned for narrow trim installation White rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4 to 5/16 diameter hinge pins asy installation Made from cast zinc vailable accessory items Replaceable white rubber tip available imensions Post length: 1 7/8" HM escription Substrate inish 676 Matte black Zinc Z-LK 677 right brass Zinc Z lackened brass Zinc Z Oil rubbed bronze Zinc Z Satin nickel Zinc Z right chrome Zinc Z Satin chrome Zinc Z ged bronze Zinc Z-643e/ White Zinc Z-W or other colors, consult factory. 24 xterior hardware 73 Hinge pin door stops conomical solution for use on low frequency, 4 1/2" hinges or above hinged doors where the installation of a standard door stop or overhead is not desirable 85 to 125 oor opening adjustments esigned for narrow trim installation White rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4" to 5/16" diameter hinge pins asy installation Made from cast zinc vailable accessory items Replaceable white rubber tip available HM escription Substrate inish 677 right brass Zinc Z Oil rubbed bronze Zinc Z Satin nickel Zinc Z right chrome Zinc Z-625 or other colors, consult factory. 24 Ives rchitectural hardware products

213 oor silencers SR64 oor silencer - metal or use on metal frames featuring pneumatic design that, once installed,forms an air pocket to absorb shock and reduce noise of door closing Tamper-proof once installed on the frame Proper installation also eliminates door rattle and provides constant tension for door latches or locks Packed in bags of 100 rey also available in bulk pack of 2500 ach bag has an installation tool included ertifications Meets NSI/HM , L03011 Made from 60 urometer styrene butadiene rubber imensions iameter: 1/2" Thickness: 1/8" (projection from frame when inserted) HM escription Substrate inish --- rey Rubber RY or other colors, consult factory. SR65 oor silencer - wood or use on wood frames, also feature pneumatic design to cushion shock and absorb noise To prevent removal, a small brad should be driven into stop strip and through stem of silencer, as shown in the detail Packed in bags of 100 ertifications Meets NSI/HM , L03021 Made from 60 urometer styrene butadiene rubber imensions Height: 3/4" Width: 3/8" Thickness: 1/8" (projection from frame when inserted) HM escription Substrate inish --- rey Rubber RY or other colors, consult factory. Pulls &plates 25 SR66 oor silencer - adhesive Self adhesive rubber silencers conomical installation requires no drilling of frames Packed two sheets of 50 (100 minimum) ertifications Meets NSI/HM , L03021 Made from 60 urometer styrene butadiene rubber imensions iameter: 1/2" Thickness: 1/8" (projection from frame when inserted) HM escription Substrate inish --- rown Rubber RN --- rey Rubber RY --- White Rubber WHT or other colors, consult factory. xterior hardware Ives rchitectural hardware products 25

214 rash stop Pulls &plates S115 rash stop Specially designed for full-size exterior doors Tear resistant, grey vinyl cover Heavy duty compression spring assembled to both ends of chain and end brackets Packed with sheet metal screw. ast brass brackets with solid, welded steel chain Optional sex bolt mounting available in US26 (626) only imensions racket size: 1-9/16" x 1-9/16" vailable lengths: 20-1/2" - Recommended for 30" door width (product no. S115-20) 25-1/2" - Recommended for 36" door width (product no. S115-25) 30-1/2" - Recommended for 42" door width (product no. S115-30) vailable accessory items Sex bolt mounting available in US26 (626) only. Through bolt with cap nut mounting available in US26 (626) only HM escription Substrate inish 613 Oil rubbed bronze rass Satin chrome rass 26 xterior hardware Ives rchitectural hardware products

215 1 xterior hardware xterior hardware Table of contents Lock guards L1 Lock guard with security pin... 2 L7 Lock guard... 2 L10 Lock guard... 2 L11 Lock guard - aluminum doors... 3 L12 Lock guard - narrow... 3 L13 Lock guard...4 L14 Lock guard - with electric strike... 4 Viewers U696 One-way viewer - UL One-way wide angle viewer... 5 U698 One-way wide angle viewer - UL One-way narrow viewer...6 U700 One-way narrow viewer - UL One-way narrow viewer for thicker doors...6 U701 One-way narrow viewer for thicker doors - UL...6 oor knockers Knocker only U Knocker with U700 viewer U Knocker with U701 viewer... 7 Mail slots 620 Magazine size letter box plate with standard (open) back plate Sleeve for use with letter box plate...8 Pulls &plates Ives rchitectural hardware products 1

216 Lock guards Pulls &plates 2 xterior hardware L1 Lock guard with security pin L7 Lock guard L1 incorporates security frame pin to prevent separation of the door and frame L7 does not incorporate the security frame pin Ideal for use with mortise or cylindrical locks Unit covers the latch bolt area of the door and lock, thereby providing added protection from burglars, vandals or normal abuse Non-handed asy installation Through bolted with carriage bolts and nuts Made from 13 gauge stainless steel, 12 gauge steel(l1 only) or brass (L1 only) - Steel imensions 3" wide x 11-1/2" high olt center to center: 10-1/2" HM escription Substrate inish 600* Primed for paint Steel USP 603* Zinc plated Steel US2 695* ark bronze painted Steel SP313 - rass HM escription Substrate inish 606* Satin brass rass US4 612* Satin bronze rass US10 - Stainless HM escription Substrate inish 630 Satin stainless Stainless steel US32 or other colors, consult factory. *Not available on L7.. L10 Lock guard Ideally suited for use with rose or escutcheon 2-3/4" wide or less or use with type 86 mortise and type 161 cylindrical locks (NSI Series 1000 and NSI Series 4000) Unique design provides maximum security, virtually eliminating the opening between door and frame at the latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Made from 13 gauge stainless steel, 12 gauge steel vailable accessory items Security pin fasteners - Steel imensions 2-1/2" wide x 9-1/2" high Stud center to center: 8-1/2" HM escription Substrate inish 600 Primed for paint Steel USP - Stainless HM escription Substrate inish 630 Satin stainless Stainless steel US32 or other colors, consult factory. 2 Ives rchitectural hardware products

217 Lock guards L11 Lock guard - aluminum doors esigned for use on aluminum doors with latch-type locks or doors equipped with electric strikes Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point Unit is handed - Specify left or right hand when ordering 2 welded mounting studs. No exposed fasteners on face of unit Made from 13 gauge stainless steel, 12 gauge steel vailable accessory items Security pin fasteners - Steel L12 imensions 3" wide x 9-1/2" high Stud center to center: 8-1/2" HM escription Substrate inish 695 ark bronze painted Steel SP313 - Stainless HM escription Substrate inish 630 Satin stainless Stainless steel US32 or other colors, consult factory. Lock guard - narrow Narrow design unit for use on rose or escutcheon 3-1/2" or less or use with type 86 mortise and type 161 cylinder locks (NSI Series 1000 and NSI Series 4000) Unique design provides maximum security, virtually eliminating the opening between door and frame at the latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Made from 13 gauge stainless steel, 12 gauge steel vailable accessory items Security pin fasteners - Steel imensions 1-1/2" wide x 9-1/2" high Stud center to center: 8-1/2" HM escription Substrate inish 600 Primed for paint Steel USP - Stainless HM escription Substrate inish 630 Satin stainless Stainless steel US32 or other colors, consult factory. Pulls &plates 3 xterior hardware Ives rchitectural hardware products 3

218 Lock guards Pulls &plates L13 Lock guard esigned for use on all type 161 cylindrical locks (NSI Series 2000) Monolock and Unilock Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Made from 13 gauge stainless steel, 12 gauge steel vailable accessory items Security pin fasteners - Steel imensions 1-1/2" wide x 7" high Stud center to center: 4-1/2" HM escription Substrate inish 600 Primed for paint Steel USP - Stainless HM escription Substrate inish 630 Satin stainless Stainless steel US32 or other colors, consult factory. L14 Lock guard - with electric strike Narrow design unit for use on rose or escutcheon 3-1/2" or less. or use with Von uprin 6210 and 6211 electric strike. No exposed fasteners on face of unit. Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point. Non-handed 4 welded mounting studs. No exposed fasteners on face of unit Made from 13 gauge stainless steel vailable accessory items Security pin fasteners imensions 2-9/16" wide x 9-1/2" high Stud center to center: 8-1/2" and 6-3/4" - Stainless HM escription Substrate inish 4 xterior hardware 630 Satin stainless Stainless steel US32 or other colors, consult factory. 4 Ives rchitectural hardware products

219 Viewers U696 One-way viewer - UL 150 angle of view or doors 1-3/8" to 2-1/16" thick Secure, tamper-resistant one-way thread installation Simple installation only a 1/2" hole required Suggested installation height: 60" from floor Meets NSI/HM , L23222 UL listed 90 minute fire doors vailable accessory items Trim washer available, 3/4" x.032" thick. xtensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room imensions xternal diameter: 3/4" HM escription Substrate inish 606 Satin brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 or other colors, consult factory. Pulls &plates 698 One-way wide angle viewer U698 One-way wide angle viewer - UL 190 angle of view 4 optical glass lenses or doors 1-3/8" to 2-1/8" thick Simple installation only a 9/16" hole required Suggested installation height: 60" from floor Meets NSI/HM , L23222 U698 is UL listed 90 minute fire doors vailable accessory items xtensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room imensions xternal diameter: 1" Lens projects 1/4" from face of door HM escription Substrate inish 605 right brass rass 3 619* Satin nickel rass * Matte black rass -LK 625* right chrome rass Satin chrome rass ged bronze rass -643e/716 or other colors, consult factory. *Not available on xterior hardware Ives rchitectural hardware products 5

220 Viewers Pulls &plates 700 One-way narrow viewer U700 One-way narrow viewer - UL 120 angle of view or doors 1-3/8" to 2-1/16" thick Secure, tamper-resistant one-way thread installation Simple installation only a 1/2" hole required Suggested installation height: 60" from floor ertifications 700 meets NSI/HM , L23173 U700 meets NSI/HM , L23223 U700 is UL listed 90 minute fire doors Made from brass, glass lens HM escription Substrate inish vailable accessory items Trim washer available, 3/4" x.032" thick. xtensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room imensions xternal diameter: 5/8" 606 Satin brass rass 4 613* Oil rubbed bronze rass * Satin nickel rass * Matte black rass -LK 625* right chrome rass * Satin chrome rass ged bronze rass -643e/716 or other colors, consult factory. *Not available on xterior hardware 701 One-way narrow viewer for thicker doors U701 One-way narrow viewer for thicker doors - UL 120 angle of view or doors 2-1/8" to 2-5/8" thick Secure, tamper-resistant one-way thread installation Simple installation only a 1/2" hole required Suggested installation height: 60" from floor ertifications 701 meets NSI/HM , L23173 U701 meets NSI/HM , L23223 U701 is UL listed 90 minute fire doors Made from brass, glass lens HM escription Substrate inish vailable accessory items Trim washer available, 3/4" x.032" thick. xtensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room imensions xternal diameter: 5/8" 606 Satin brass rass 4 613* Oil rubbed bronze rass * Satin nickel rass * Matte black rass -LK 625* right chrome rass * Satin chrome rass ged bronze rass -643e/716 or other colors, consult factory. *Not available on Ives rchitectural hardware products

221 oor knockers Knocker only U Knocker with U700 viewer U Knocker with U701 viewer and U for door thickness 7/8" 1-9/16" and U for door thickness 1-5/8" 2-1/8" olts through door ertifications Meets NSI/HM , L23161 Made from forged brass HM escription Substrate inish imensions Length: 5-15/16" Width: 3" Projection: 1-1/16" Mounting hole center-to-center: 3-15/16" 605 right brass rass 3 609* lackened brass rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 or other colors, consult factory. *5 knockers are not available with viewer. 3 is furnished with 4(606) viewer, 716 is furnished with 10 viewer, 15 (619) is furnished with a 626 viewer. Pulls &plates 7 xterior hardware Ives rchitectural hardware products 7

222 Mail slots Pulls &plates 620 Magazine size letter box plate with standard (open) back plate Spring-loaded front plate Sex bolt mounting available, order separately finish. Packed with fasteners for wood applications ertifications Meets NSI/HM , L26031 Made from brass or aluminum - rass imensions Overall size: 13" wide x 3-9/16" high Plate opening: 11" x 2" high HM escription Substrate inish 605 right brass rass lackened brass rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 628 lear anodized luminum P28 or other colors, consult factory. 601 Sleeve for use with letter box plate or use on 1-3/4" hollow core doors. Prevents items falling into door 1/4" Wide strengthening rib for added durability an be stacked thicker doors Made of stainless steel imensions Overall size: 11 7/16" wide x 2 11/16" high x 1 3/4" deep 8 xterior hardware 8 Ives rchitectural hardware products

223 Miscellaneous door hardware Table of contents rackets and hooks 059 Hand rail bracket Hand rail bracket Hand rail bracket oat & hat hook oat & hat hook oat & hat hook oat & hat hook oat & hat hook eiling hook Wardrobe hook ouble wardrobe hook...8 SP585 loset pole sockets...9 SP586 loset pole sockets...9 ecorative hooks 506 Plymouth coat & hat hook Rhodes coat & hat hook Rhodes wardrobe hook reenwich coat & hat hook reenwich coat & hat hook, concealed mount Tubular coat & hat hook, concealed mount Latitude coat & hat hook, concealed mount Latitude wardrobe hook, concealed mount entury wardrobe hook, concealed mount amelot coat & hat hook amelot wardrobe hook entury coat & hat hook Orbit wardrobe hook Tubular wardrobe hook Window hardware 07 Window lock Side window lock ar window lift asement fastener asement fastener asement adjuster Rescue hardware 299RS Rescue strike - center R Rescue strike - offset S mergency stop assembly - center mergency stop assembly - offset Pulls &plates xterior hardware 1 Ives rchitectural hardware products 1

224 rackets and hooks Pulls &plates rass substrate luminum substrate 059 Hand rail bracket Large faceplate for secure attachment to wall eatures solid construction for increased strength Packaged with fasteners for wood applications ertifications Meets NSI/HM , L13061 for brass and L33061 for aluminum Made from solid brass, cast aluminum, or zinc - rass imensions racket size: 1-9/16" x 1-9/16" HM escription Substrate inish 605 right brass rass lackened brass rass Oil rubbed bronze rass Satin nickel rass lackened nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum lackened brass luminum Satin bronze luminum Oil rubbed bronze luminum right nickel luminum Satin nickel luminum right chrome luminum Satin chrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK --- White luminum -W - Zinc HM escription Substrate inish --- Satin nickel Zinc Z619 or other colors, consult factory. 2 xterior hardware 2 Ives rchitectural hardware products

225 rackets and hooks rass substrate luminum substrate 59 Hand rail bracket Large faceplate for secure attachment to wall eatures solid construction for increased strength Packaged with fasteners for wood applications ertifications Meets NSI/HM , L13061 for brass and L33061 for aluminum Made from cast brass or cast aluminum - rass HM escription Substrate inish 605 right brass rass lackened brass rass Satin nickel rass right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum lackened brass luminum Oil rubbed bronze luminum right nickel luminum Satin nickel luminum luminum clear coat luminum ged bronze luminum -643e/716 or other colors, consult factory. 159 Hand rail bracket imensions luminum base: 2-13/16" high x 1-7/16" wide rass base: 2-15/16" high x 1-1/2" wide ase to center of rail: 2-3/4" Pulls &plates or use on commercial applications xceeds OSH and HM strength test requirements Packed with fasteners for masonry and wood applications ertifications Meets NSI/HM , L33081 Made from cast aluminum - luminum imensions ase diameter: 3-1/8" ase to rail center: 3-1/8" HM escription Substrate inish 666 right brass luminum US3L 673 luminum clear coat luminum US27 or other colors, consult factory. xterior hardware 3 Ives rchitectural hardware products 3

226 rackets and hooks 405 oat & hat hook Wide body design is ideal for public buildings, schools, dormitories, etc., where hook must withstand unusual stress and strain ertifications Meets NSI/HM , L33113 Made from cast aluminum - luminum imensions ase: 1-1/2" high x 7/8" wide Projection: 2-1/2" Pulls &plates HM escription Substrate inish 666 right brass luminum Satin brass luminum lackened brass luminum Satin bronze luminum Oil rubbed bronze luminum right nickel luminum luminum clear coat luminum 92 or other colors, consult factory. 571 oat & hat hook ll-purpose hook in traditional design Packaged with fasteners for wood applications rass substrate luminum substrate ertifications Meets NSI/HM , L13113 for brass and L33113 for aluminum Made from cast brass and cast aluminum - rass imensions ase: 1-3/4" high x 1-3/16" wide Projection: 3" HM escription Substrate inish 605 right brass rass Satin brass rass lackened brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish xterior hardware right brass luminum lackened brass luminum Satin bronze luminum right nickel luminum Satin nickel luminum right chrome luminum Satin chrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK --- White luminum -W - Zinc HM escription Substrate inish --- Satin nickel Zinc Z619 or other colors, consult factory. 4 Ives rchitectural hardware products

227 rackets and hooks rass substrate luminum substrate 572 oat & hat hook ll-purpose hook in traditional design Packaged with fasteners for wood applications ertifications Meets NSI/HM , L13113 for brass and L33113 for aluminum Made from cast brass and cast aluminum - rass HM escription Substrate inish 605 right brass rass Satin brass rass lackened brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass right chrome rass Satin chrome rass 26 - luminum HM escription Substrate inish 574 oat & hat hook imensions rass base: 1-1/2" high x 1-1/4" wide Projection: 3-1/8" 666 right brass luminum lackened brass luminum Satin bronze luminum Oil rubbed bronze luminum right nickel luminum Satin nickel luminum luminum clear coat luminum 92 or other colors, consult factory. ecorative design is ideal for commercial and residential installations Packaged with fasteners for wood applications ertifications Meets NSI/HM , L13113 for brass and L33113 for aluminum Made from cast brass and cast aluminum - rass imensions ase: 1-5/8" high x 1-3/4" wide Projection: 3-3/4" Overall height, brass: 4-3/4" Overall height, aluminum: 5" HM escription Substrate inish 605 right brass rass Satin brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass right chrome rass Satin chrome rass 26 - luminum HM escription Substrate inish 666 right brass luminum right chrome luminum luminum clear coat luminum 92 or other colors, consult factory. Pulls &plates xterior hardware 5 Ives rchitectural hardware products 5

228 rackets and hooks Pulls &plates 575 oat & hat hook specially designed to accommodate large hats Packaged with fasteners for wood applications ertifications Meets NSI/HM , L33121 Made from cast aluminum - luminum imensions ase: 2-1/4" high x 1-3/8" wide Projection: 3-5/8" Overall height: 5-3/4" HM escription Substrate inish 666 right brass luminum Oil rubbed bronze luminum luminum clear coat luminum 92 or other colors, consult factory. 580 eiling hook Ideal for use in closets, attached to underside of shelves, or in storage lockers Packaged with fasteners for wood applications Made from cast aluminum - luminum imensions ase: 1" high x 1-7/8" wide Projection: 2-1/4" HM escription Substrate inish 666 right brass luminum lackened brass luminum Satin bronze luminum right nickel luminum Satin nickel luminum right chrome luminum Satin chrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK or other colors, consult factory. 6 xterior hardware 6 Ives rchitectural hardware products

229 rackets and hooks 581 Wardrobe hook ompact hook is perfect where space is limited, such as behind doors where low profile is needed. Packaged with fasteners for wood applications Made from cast brass, cast aluminum, or zinc imensions ase, brass/aluminum: 1-1/4" high x 1-1/4" wide ase, zinc: 1-1/2" high x 3/4" wide Projection, brass: 1-11/16" Projection, luminum, zinc: 1-5/8" - rass HM escription Substrate inish 605 right brass rass Satin brass rass lackened brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum lackened brass luminum right nickel luminum Satin nickel luminum right chrome luminum Satin chrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK --- White luminum -W - Zinc HM escription Substrate inish --- Satin nickel Zinc Z619 or other colors, consult factory. Pulls &plates xterior hardware 7 Ives rchitectural hardware products 7

230 rackets and hooks Pulls &plates 582 ouble wardrobe hook ompact double hook is perfect where space is limited, such as behind doors where low profile is needed Packaged with fasteners for wood applications Made from cast brass, cast aluminum, or zinc imensions ase, brass: 1-1/8" high x 1-1/4" wide ase, aluminum: 1-1/16" high x 1-3/16 wide ase, zinc: 1-5/8" high x 7/8" wide Projection, brass: 1" Projection, aluminum, zinc: 1-3/32" - rass HM escription Substrate inish 605 right brass rass Satin brass rass lackened brass rass Satin bronze rass Oil rubbed bronze rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum lackened brass luminum Satin bronze luminum right nickel luminum Satin nickel luminum right chrome luminum Satin chrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK --- White luminum -W - Zinc HM escription Substrate inish --- Satin nickel Zinc Z619 or other colors, consult factory. 8 xterior hardware 8 Ives rchitectural hardware products

231 rackets and hooks SP585 loset pole sockets lange design prevents accidental knock out of pole ccommodates pole or pipe with outside diameter of 1-3/8" Packed in pairs Packaged with fasteners for wood applications Made from wrought steel SP586 HM escription Substrate inish 632 right brass Steel 3 loset pole sockets Single screw mounting ccommodates pole or pipe with outside diameter of 1-3/8" Packed in pairs Packaged with fasteners for wood applications Made from a heavy duty plastic for long life and extra strength HM escription Substrate inish ---* White Plastic P *Only available in Slim-Pak of 25. Pulls &plates xterior hardware 9 Ives rchitectural hardware products 9

232 ecorative hooks Pulls &plates 506 Plymouth coat & hat hook ecorative design is ideal for all installations esign complements Plymouth Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from brass See finishes below 507 Rhodes coat & hat hook ecorative design is ideal for all installations esign complements Rhodes Series pulls and levers Surface mount Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from brass See finishes below 507 Rhodes wardrobe hook ecorative design is ideal for all installations esign complements Rhodes Series pulls and levers Surface mount Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from brass imensions ase: 2" high x 1/2" wide Projection: 2" Overall height: 5-1/4" Overall width: 4-3/4" imensions ase: 2-5/16" high x 1/2" wide Projection: 3-1/2" Overall height: 4-1/2" imensions ase: 2-5/16" high x 1/2" wide Projection: 1-15/16" See finishes below xterior hardware reenwich coat & hat hook ecorative design is ideal for all installations esign complements reenwich Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from brass See finishes below 506, 507, 507 and 508 imensions ase: 2" high x 1-1/2" wide Projection: 3-5/16" Overall height: 5-1/2" HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/716 or other colors, consult factory. 10 Ives rchitectural hardware products

233 ecorative hooks 508 reenwich coat & hat hook, concealed mount ecorative design is ideal for all installations esign complements reenwich Series pulls and levers oncealed mount - packaged with set screw Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from brass See finishes below 509 Tubular coat & hat hook, concealed mount imensions ase: 2" high x 1-1/2" wide Projection: 3-11/16" Overall height: 5-1/2" ecorative design is ideal for all installations esign complements Tubular Series pulls and levers oncealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from brass See finishes below 510 Latitude coat & hat hook, concealed mount imensions ase: 1-15/16" diameter Projection: 3-1/4" Overall height: 5-11/16" ecorative design is ideal for all installations esign complements Latitude Series pulls and levers oncealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from cast brass imensions ase: 1-15/16" diameter Projection: 3-3/4" Overall height: 5-11/16" Pulls &plates See finishes below 510 Latitude wardrobe hook, concealed mount ecorative design is ideal for all installations esign complements Latitude Series pulls and levers oncealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from cast brass See finishes below imensions ase: 1-15/16" diameter Projection: 3-1/4" xterior hardware 508, 509, 510 and 510 HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/716 or other colors, consult factory. Ives rchitectural hardware products 11 11

234 ecorative hooks Pulls &plates 511 entury wardrobe hook, concealed mount ecorative design is ideal for all installations esign complements entury Series Pulls and Levers oncealed mount Pre-installed fastener for wood applications ertifications Meets NSI/HM Made from cast brass imensions ase: 1" high x 3/4" wide Projection: 1-1/2" HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/716 or other colors, consult factory. 543 amelot coat & hat hook ecorative design is ideal for all installations esign complements amelot Series pulls and levers Surface mount Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from stainless steel See finishes below imensions ase: 2" high x 13/16" wide Projection: 2-1/2" Overall height: 5-1/2" xterior hardware amelot wardrobe hook ecorative design is ideal for all installations esign complements amelot Series pulls and levers Surface mount Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from stainless steel See finishes below 543 and 543 imensions ase: 2" high x 13/16" wide Projection: 1-11/16" HM escription Substrate inish 629 right stainless Stainless steel US Satin stainless Stainless steel US32 or other colors, consult factory. 12 Ives rchitectural hardware products

235 ecorative hooks 554 entury coat & hat hook ecorative design is ideal for all installations esign complements entury Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from cast brass 558 imensions ase: 2" iameter Projection: 4-1/4" Overall height: 4-7/8" HM escription Substrate inish 605 right brass rass Satin nickel rass Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/716 or other colors, consult factory. Orbit wardrobe hook ecorative design is ideal for all installations esign complements Orbit Series pulls and levers oncealed mount - packaged with set screw Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from brass See finishes below imensions ase: 3-5/8" high x 3/4" wide Projection: 2-7/8" Pulls &plates 559 Tubular wardrobe hook ecorative design is ideal for all installations esign complements Tubular Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications ertifications Meets NSI/HM Made from brass See finishes below 558 and 559 imensions ase: 2" iameter Projection: 1-5/16" HM escription Substrate inish 605 right brass rass Oil rubbed bronze rass Satin nickel rass Matte black rass LK 625 right chrome rass Satin chrome rass ged bronze rass 643e/716 or other colors, consult factory. xterior hardware 13 Ives rchitectural hardware products 13

236 Window hardware Pulls &plates 07 Window lock esigned low to the sash for superior strength and greater resistance to breakage Vertical and horizontal camming action for snug, non-rattling fit Heavy gauge springs provide long-wearing action Packaged with fasteners for wood applications ertifications Meets NSI/HM , L33121 Made from cast brass or aluminum - rass imensions ase: 15/16" x 2-9/16" Strike: 5/8" x 2-9/16" HM escription Substrate inish 605 right brass rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum 3 ---* lackened brass luminum Oil rubbed bronze luminum right nickel luminum Satin nickel luminum right chrome luminum Satin chrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK --- White luminum -W or other colors, consult factory. *Only available in Slim-Pak of 25. xterior hardware Side window lock May be used singularly for small windows or in pairs for large windows am action eliminates rattles and holds window firmly in desired position Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from aluminum - luminum imensions 1-3/4" high x 1-1/8" wide HM escription Substrate inish 666 right brass luminum 3 or other colors, consult factory. 14 Ives rchitectural hardware products

237 Window hardware 026 ar window lift acilitates opening of window in a safe manner an also be used as a drawer or utility pull Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from solid brass or aluminum - rass imensions ase: 1-1/8" high x 4" wide Projection: 1-1/16" HM escription Substrate inish 605 right brass rass lackened brass rass Satin nickel rass Matte black rass -LK 625 right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum lackened brass luminum right nickel luminum Satin nickel luminum right chrome luminum Satin chrome luminum luminum clear coat luminum ged bronze luminum -643e/ Matte black luminum -LK --- White luminum -W or other colors, consult factory. Pulls &plates 066 asement fastener Surface Strike (SS) Rim Strike (RS) Mortise Strike (MS) or use on windows to provide weather-tight fastening and security lso ideal for securing louvered doors and small doors Packaged with three strikes: Surface Strike (SS) Rim Strike (RS) Mortise Strike (MS) Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from solid brass or aluminum - rass imensions ase: 1-5/8" x 7/8" Projection: 1-3/8" HM escription Substrate inish 605 right brass rass lackened brass rass Satin nickel rass right chrome rass Satin chrome rass 26 xterior hardware - luminum HM escription Substrate inish 666 right brass luminum lackened brass luminum Oil rubbed bronze luminum right nickel luminum luminum clear coat luminum 92 or other colors, consult factory. 15 Ives rchitectural hardware products 15

238 Window hardware 66 asement fastener or use on windows to provide weather-tight fastening and security lso ideal for securing louvered doors and small doors Packaged with three strikes: Surface Strike (SS), Rim Strike (RS), or Mortise Strike (MS) Packaged with fasteners for wood applications ertifications Meets NSI/HM Pulls &plates Surface Strike (SS) Rim Strike (RS) Mortise Strike (MS) Made from solid brass or aluminum - rass imensions ase: 2-1/16" high x 1-1/16" wide Projection: 1-7/8" HM escription Substrate inish 605 right brass rass lackened brass rass Satin nickel rass right chrome rass Satin chrome rass ged bronze rass -643e/716 - luminum HM escription Substrate inish 666 right brass luminum lackened brass luminum right nickel luminum luminum clear coat luminum 92 or other colors, consult factory. 71 asement adjuster Securely holds casement window in any position. an also be used to hold cabinet lids and drafting table tops in various positions. vailable in 10" and 12" lengths. Packaged with fasteners for wood applications ertifications Meets NSI/HM Made from burnished steel or solid brass imensions Tube: 3/8" x 5/8" Projection: 1" xterior hardware Sash plate: rass: 1-5/8" high x 5/8" wide Steel: 2 x 5/8" wide Sill plate: 2-1/4" x 15/16" wide HM escription Substrate inish right brass rass right chrome rass Ives rchitectural hardware products