Toilet Partition Hardware
|
|
- Cuthbert Richardson
- 6 years ago
- Views:
Transcription
1 Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with Housing merican Metal Used with Housing For 1" Laminated Door With Flat Tip Bar. For 1" Steel Door D For 1" Steel Door For 1" Laminated Door Zinc Die Cast - Unplated Zinc Die Cast - Unplated For 1" Steel Door With Indicator. For 1" Steel Door Chrome Plated Door Pulls, Hooks and Door Stops Mounting Holes Tapped Mounting Holes Tapped Mounting Holes Tapped Finish 91-7 Chrome Plated 91-7BP Brass Plated 91-7J Heavy Duty. 7/32" Hole Diameter 91-6 Coat Hook with Bumper 7/32" Hole Diameter /4" Hole Diameter " High 355
2 Chrome Plated Keepers and Strikes for 1-1/4" Round and Square Posts D Latch with Flat Bar 91-5 Latch with Round Bar Latch with Flat Bar Inswing for Throw Latch. Emergency ccess D , Chrome Inswing for Throw Latch Emergency ccess Inswing/ Inswing/Outswing Strike D Inswing for Throw Latch Emergency ccess Latch with Round Bar Chrome Plated Wrap round Gravity Pivot Hinges for 1-1/4" Round and Square Posts /64" /32" /16" 356 FX:
3 Chrome Plated Wrap round Gravity Pivot Hinges for 1-1/4" Round and Square Posts /16" /64" General/Knickerbocker /64" General/Knickerbocker /16" mpco/metpar Description /64" with Pintle /64" without Pintle mpco/metpar /64" /64" /64" Use: Use: Top and Bottom Hinge Surface Mounted Gravity Hinge Square Barrel Hinge set for RH Inswinging or LH Outswinging. Cast Stainless Steel. Satin Finish Round Barrel Hinge set for LH Inswing or RH Outswing. Chrome Plated. Includes 8 One Way Screws and 8 Barrel Nuts Round Barrel Hinge set for RH Inswing or LH Outswing. Chrome Plated. Includes 8 One Way Screws and 8 Barrel Nuts Chrome Plated Wall Brackets Square Barrel Hinge set for LH Inswinging or RH Outswinging. Cast Stainless Steel. Satin Finish Chrome Plated Urinal Brackets B C " 2-1/2" 2-21/32" /4" 2-1/2" 2-3/4" /4" 3-1/2" 2-3/4" One Ear B C /4" 2-1/2" 3" Two Ears B C " 2-1/2" 4" " 3-1/2" 4" /4" 2-1/2" 4" Two Ears B C " 3-1/2" 4" /4" 3-1/2" 4" Screen Brackets B C " 12" 7" /4" 6" 6-1/4" Wing Brackets 357
4 Chrome Plated U - Brackets Replacement Pilaster Shoes Square Edge1-1/4" Thick Pilaster Shoes Open Front w/holes. 22 Gauge Stainless Steel. Satin Finish Round Edge1-1/4" Thick Pilaster Shoes Open Front w/holes. 22 Gauge Stainless Steel. Satin Finish B C /8" 1-3/8" 1-5/32" " 1-3/8" 1-1/4" /4" 1-3/8" 1-1/2" "" " " " " " " " " " Door Inserts "" " " " " " " " " " Top - for 1" Square Edge Door Chrome Plated Bottom - for 1" Square Edge Door Chrome Plated Bottom - for 1" Round Edge Metal Door. Unplated Cams, Pintles and Hinge Pins Bottom - for 1" Round Edge Metal Door. mpco/metpar B Used with and Set Used with , and White Plastic. Fits Insert White Plastic. Fits Insert White Plastic. Fits Insert White Plastic White Plastic Nylon Hadrian Hadrian 358 FX:
5 Cams, Pintles and Hinge Pins Toilet Partition Hardware Metpar Plastic Hinge Bracket for Plastic Laminated Pilasters Chrome Plated lcove Clips, Head Rail, End Plugs and Brackets General For 1" to 1-1/4" Post. Right ngle Curved Molding Flush Metal lcove Right ngle Curved Molding Metpar lcove 1-1/4" Offset (1/8" per side). For all Size Posts Headrail Bracket Pilaster Shoe for 1-3/4" Square Tube /4" Nylon Square Post Cap Rectangular Endplug for 1" Handrail /4" Nylon Square Post Plug Three sizes available to fit all one-way screws Floor Bracket Spring Clip One-Way Screw Remover nti-grip End Plug for all Size Handrails If you've tried to remove One-Way Tamper-Proof Screws from toilet partition, locks, fixtures and assemblies... you know the frustration involved. NO MORE DRILLING, POUNDING, PULLING, OR CHISELING... that wastes time, bruises knuckles and causes costly hardware damage. Highly praised by thousands of locksmiths, maintenance and service personnel, contractors and other professionals as a VLUBLE TOOL NEEDED FOR YERS! Chrome Plated Toilet Partition Fasteners Easy to Use Works like an ordinary screwdriver. "No slip" tip design provides maximum holding power until screw is removed Thread x 15/16" Long Thread x 1-3/16" Long Thread x 1-3/8" Long One Way Screws Thread x 5/8" Long Thread x 1/2" Long US 8-32 Thread x 1/2" Long (Not Slotted) Barrel Nut #10 x 3/4" Long #10 x 1" Long #10 x 5/8" Long Self Tapping Screws 359
Melamine Plastic Laminate. Toilet Partition Installation Manual
Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE
More informationStainless Steel 95C34 Series
Stainless Steel 95C34 Series Toilet Partition Installation Manual PHONE: FAX: 866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL
More informationHardware. Brackets. Cast Chrome Plated Zamac Door Pack for High Pressure Laminate Compartments T O I L E T P A R T I T I O N S
Brackets 1a Stamped Stainless Steel U Bracket available in 1/2,3/4, 7/8 and 1 2a Stamped Stainless Steel T Bracket available 1/2, 3/4, 7/8 and 1 3a Stamped Stainless Steel F Bracket available in 1/2, 3/4,
More informationInstallation Manual for Metal Toilet Partitions Standard Series
For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations
More informationInstallation *HDWL-INSTR-001* IMPORTANT. Plastic Laminate Restroom Partitions Floor-Mounted with Overhead Brace Series 400
Plastic Laminate Restroom Partitions Floor-Mounted with Overhead race Series 400 For Standard Height Doors and Panels Only Table of ontents Pre- Information...2 Layout Dimensions for rackets...3 Mounting
More informationBioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
More informationInstallation Instructions for 30, 40, and 50 Series Plastic Laminate Toilet Partitions.
GENERAL PARTITIONS Mfg. Corp. 170 Peninsula Drive, Erie PA 16505-443 P.O. Box 8370, Erie, PA 16505-0370 Phone (814) 833-1154 FAX (814) 838-3473 Installation Instructions for 30, 40, and 50 Series Plastic
More informationInstallation Instructions
AMPCO Stainless Steel and Baked Enamel Toilet Partitions AMPCO Florida 11400 NW 36 th Avenue Miami, FL 33167 T. 305.821.5700 florida@ampco.com AMPCO Texas 201 Railroad Avenue Sanger, TX 76266 T. 940.458.7401
More informationTable of Contents IMPORTANT
Plastic Laminate Restroom Partitions Floor-raced Series 500 For Standard Height Doors and Panels Only Table of ontents Pre- Information...2 Layout Dimensions for rackets...3 Mounting rackets to Wall...4
More informationTable of Contents IMPORTANT
For Standard Height oors and Panels Only Plastic Laminate Restroom Partitions eiling-hung Series 600 Table of ontents Pre- Information...2 Layout imensions for rackets...3 Mounting rackets to Wall...4
More informationInstallation Manual for Metal Toilet Partitions Elite & Elite Plus Series
P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations 4 STEP 2: Fasten Floor Brackets 4 & 5 STEP 3: Erect Panels 6 STEP 4: Erect Wall Pilaster 7
More informationInstallation. *HDWC-INSTR-008* HDWC-INSTR-008 Rev. H; ECN G 2018 Bradley Page 1 of 24 3/22/2018
Installation Phenolic Restroom Partitions Floor-To-Ceiling Series 700 For Standard Height Doors and Panels Only Table of Contents Pre-Installation Information... 2-3 Layout Dimensions for rackets...4 Mounting
More informationInstallation. *HDWC-INSTR-007* HDWC-INSTR-007 Rev. K; ECN G 2018 Bradley Page 1 of 24 3/22/2018
Installation Phenolic Restroom Partitions, Ceiling-Hung Series 600 Table of Contents Pre-Installation Information... 2-3 Layout Dimensions for rackets...4 Mounting rackets to Wall... 5-6 Leveling rackets
More informationInstallation. *HDWC-INSTR-006* HDWC-INSTR-006 Rev. K; ECN G 2018 Bradley Page 1 of 24 3/22/2018
Installation Phenolic Restroom Partitions Floor-raced Series 500 For Standard Height Doors and Panels Only Table of Contents Pre-Installation Information... 2-3 Layout Dimensions for rackets...4 Mounting
More informationInstallation Instructions
AMPCO Solid Plastic Toilet Partitions AMPCO Florida 11400 NW 36 th Avenue Miami, FL 33167 T. 305.821.5700 florida@ampco.com AMPCO Texas 201 Railroad Avenue Sanger, TX 76266 T. 940.458.7401 texas@ampco.com
More informationSTANDARD STALL INSTALLATION DETAIL
14" NOTE: ALUMINUM HEAT SINC STRIP TO BE MOUNTED AT BOTTOM OF PANELS & DOORS. STANDARD STALL INSTALLATION DETAIL ALCOVE WITH ADJOINING STALL INSTALLATION DETAIL ALCOVE INSTALLATION DETAIL C L OF PILASTER
More informationInstallation Instructions
AMPCO Compact Laminate (Phenolic) Toilet Partitions AMPCO Florida 11400 NW 36 th Avenue Miami, FL 33167 T. 305.821.5700 florida@ampco.com AMPCO Texas 201 Railroad Avenue Sanger, TX 76266 T. 940.458.7401
More informationSection 3: Understanding Your Shop Drawings Reading Shop Drawing Abbreviations 60" O.A. stands for the overall dimension from the back wall to the front face of achieve your 60" overall you will set the
More informationInstallation Manual. Solid Plastic Toilet Partitions. IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.:
Installation Manual Solid Plastic Toilet Partitions Toilet Partitions & Lockers IN THE U.S.A.: Hadrian Inc., 7420 Clover Avenue, Mentor, OH 44060 Telephone: 440-942-9118 Fax: 440-942-9618 U.S. toll free
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS LAMINATED P LASTIC TOILET PArTITIONS 1540 ClassicSeries with Options IMPORTANT: Storage and Handling Information on last page. For faster, easier installation, please review these
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationINSTALLATION INSTRUCTIONS FOR ALPACO CLASSIC PARTITIONS
INSTALLATION INSTRUCTIONS FOR ALPACO CLASSIC PARTITIONS Table of Contents Topic Page Layout and Wall Brackets 2 Panel and Pilaster Prep. 3 Securing Components and Headrail 4 Panel to Pilaster/Wall Assembly.....
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Special-Lite Restroom Partitions IMPORTANT - BEFORE YOU START... 1. Read through these installation instructions first to understand the order of work. 2. Check all components
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
More informationInstallation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
More informationINSTALLATION INSTRUCTIONS FOR ALPACO CLASSIC PARTITIONS
INSTALLATION INSTRUCTIONS FOR ALPACO CLASSIC PARTITIONS Table of Contents Topic Page Layout and Wall Brackets 2 Panel and Pilaster Preparation.. 3 Securing Components and Headrail 4 Panel to Pilaster/Wall
More informationEUROLINE CLASSIC PHENOLIC / EVERGREEN. Installation Instructions. Installation Instructions.
EUROLINE ASSIC PHENOLIC / EVERGREEN EUROLINE ASSIC PHENOLIC / EVERGREEN Before you begin, please note the following considerations: Safety First! Please use proper safety gear when performing any installation.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
More informationEUROLINE CLASSIC SOLID SURFACE Installation Instructions
EUROLINE ASSIC SOLID SURFACE Installation Instructions 12/01/15 EUROLINE ASSIC SOLID SURFACE Installation Instructions Before you begin, please note the following considerations: Safety First! Please use
More informationHEADRAIL BRACED INSTALLATION MANUAL. Tools Required
Tools Required 4 ft. level Hammer Hammer drill Misc. screwdriver bits Hacksaw Misc. drill bits, including 4mm (5/32 ) & 8mm (5/16 ) 6mm (1/4 ) masonry bit 11mm (7/16 ) wrench 13mm (1/2 ) wrench Chalkline
More informationSubmittal Transmittal
Submittal Transmittal Detailed, Group by Number Date: 1/9/2014 Reference Number: 0653 Transmitted To: Jenn Foskett Transmitted By: Tristie Tajima W H Cress Company Inc. Skanska USA Building Inc. 1824 Bickford
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review
More informationDOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
More informationINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Plastic Laminate Series contents page 1030 TrimLineSeries...2-21 1040 DesigerSeries...2-21 Urinal Screens, Benches, Shower Seats...22-31 2030 TrimLineSeries Maximum Privacy...32-47
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS MAXIMUM PRIVACY HIGH PRESSURE LAMINATE (HPL) TOILET PARTITIONS 2030 TrimLineSeries 2040 DesignerSeries IMPORTANT: Storage and Handling Information on last page. Review these instructions
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS COMPACT LAMINATE TOILET PARTITIONS 1080 DuraLineSeries 1180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information
More informationIMPORTANT: installation. FLOOR ANCHORED CEILING HUNG OVERHEAD BRACED FLOOR-TO- CEILING ANCHORED
INSTALLATION INSTRUCTIONS MAXIMUM PRIVACY COMPACT LAMINATE TOILET PARTITIONS 2080 DuraLineSeries 2180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and
More informationINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Soild Phenolic Series contents page 1080 DuraLineSeries...2-21 1180 DuraLineSeries...2-21 2080 DuraLineSeries Maximum Privacy...22-41 2180 DuraLineSeries Maximum Privacy...22-41
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED
More informationFloor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
More informationWindowAndDoorParts.US
Knob/Push Pull Latch Sets Tulip Knob Latch, Single Hole 17-52 Aluminum Installs in single hole bore 1-1/4" diameter. Tulip Knob Latch 17-59 17-60 Aluminum Tulip Knob Latch "No Lock Out" Feature 17-61 Aluminum
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationHookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
More informationINSTALLATION INSTRUCTIONS SierraSeries SOLID COLOR REINFORCED COMPOSITE (SCRC) TOILET PARTITIONS
INSTALLATION INSTRUCTIONS SierraSeries SOLID COLOR REINFORCED COMPOSITE (SCRC) TOILET PARTITIONS CONTENTS PAGE 1090 with Heavy-Duty Hardware 2-24 1090.67 with Institutional Hardware 25-47 In the United
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationAuxiliary Hardware Brass Padlocks
Brass Padlocks Gainsborough offer a selection of quality 45mm and 50mm brass padlocks, featuring brass and steel materials and 6 pin cylinder security. The range includes hardened steel or brass shackles
More informationCasement. The Bronze Craft Corporation CASEMENT HARDWARE. fax
C1 CASEMENT HARDWARE www.bronzecraft.com 800-488-7747 C2 Naval Brass, Satin Brushed 2104 Handle The handle allows for mounting on to the side of the jamb or center mullion and the offset grip ensures ample
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationCabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationMANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
More informationUtensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides
Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and
More informationYour global resource for quality commercial door hardware. Euroline Catalog Euroline Catalog
Your global resource for quality commercial door hardware. Catalog Catalog More for your door than any other brand. TM Industry-Leading Service For more than 158 years, Hager Companies has led the industry
More informationTrim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
More informationHONEYCOMB SHADES with Continuous Cord Loop
HONEYCOMB SHADES with Continuous Cord Loop GETTING STARTED BRACKET INFORMATION A few simple tools are required: The brackets you received with your product are REQUIRED for proper installation. Brackets
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More information35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate
35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing
More informationROMAN AND. Roller Lift System Continuous Cord Loop GETTING STARTED BRACKET INFORMATION INSIDE MOUNT. A few simple tools are required:
ROMAN AND WOVEN WOOD SHADES Roller Lift System Continuous Cord Loop GETTING STARTED BRACKET INFORMATION A few simple tools are required: The brackets you received with your product are REQUIRED for proper
More informationPLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw.
Flush Valves PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw. Toilet Flappers 51005 10 Anti siphon 5 50 6.25 P51005
More informationEZ-MATRIX I N S TA L L AT I O N I N S T R U C T I O N S EZ-MATRIX
TM I N S TA L L AT I O N I N S T R U C T I O N S READ THESE INSTRUCTIONS page 2 Installer Tips: Installation is best completed with the help of one or two people. Prior to beginning, please read through
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationEASY-IN POOL STEP SYSTEM NE132
EASY-IN POOL STEP SYSTEM NE132 This instruction manual features multiple guides for the step unit components. 7939 EASY POOL STEP (NE113) FOR USE WITH: EASY-IN POOL STEP (NE126) 6492 PARTS & HARDWARE FOR
More informationMAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
More informationUltra Fast Delivery SGL Toilet Cubicle Pack Fitting Instructions
Ultra Fast Delivery SGL Toilet Cubicle Pack Fitting Instructions This instructional booklet should be read in full prior to undertaking any work. If in doubt please call Commercial Washrooms on 01202 650900,
More informationStainless Steel Continuous Hinges
Stainless Steel Continuous Hinges Why Continuous? Hager Companies heavy duty stainless steel continuous hinges are designed and engineered to evenly distribute door weight along the full length of the
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationPRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions
PRE-ENGINEERED HORSE STALL SYSTEMS 4800 SDFD SLIDING DOOR c/w FOLD-DOWN GRILL & Assembly Installation Instructions 4800 SDFD Sliding Door c/w Fold-Down Grill Components - 1 3 /4" x 2" x 88" channels (2)
More informationHARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK
HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK HARDWARE SPECIFICATION KEY 1. DOOR/DRAWER PULLS 2. HINGES 3. DRAWER SLIDES 3A. DRAWER SLIDES 3B. FILE DRAWER SLIDES 4. LOCKS 4A. DRAWER LOCKS
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationHiniker Company th St. P.O. Box 3407 Mankato, MN VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC 4x4: K1500 SILVERADO/SIERRA
VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC x: 007 03 K500 SILVERADO/SIERRA Page of 5 Hiniker Company 58766 0th St. P.O. Box 307 Mankato, MN 5600 INSTRUCTION SHEET NO: 505 Rev. A August 0, 03 IMPORTANT:
More informationFASTENERS 701L, 701L-ASS 701L-C. Over Centre Fasteners 701 Series. Over Centre Fasteners 701 Series
1 2 Over Centre Fasteners 701 Series 701L, 701L-ASS 701L - Cold Rolled 701L-ASS - 316 Stainless 701L - Zinc Plated 701L-ASS - RAW 41g Padlockable Suits Strikers 30Z & 30-ASS Ø 4.3mm Over Centre Fasteners
More informationFine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
More informationArchitectural Hardware
Architectural Hardware Surface Closers Precision Architectural Closers are designed for heavy duty commercial use. With an adjustable power tension, these closers can handle the lightest ADA Compliant
More informationAdams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
More informationDoor Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612
Door Reinforcers Application Part No. Finish Overall Size Back Set Door Thickness For Cylindrical Door Locks with 2 1 8 2-PB-CW 605 hole, 9 height. 9 2 3 8 1 3 2-S-CW 630 3-BZ-CW 612 3-PB-CW 605 1 9 2
More informationUniversal ARCOS EA. Patch Fittings
Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings
More informationA = 4-1/2 B = 1/4 C = 5/16. Pin Dia. Use with C-11, C-12, C-13, C-19 Use with C-10, C-12, C-13, C dia. A = 4-1/3 A = /16 1-5/8
B C-10 Dia. Pin C-11 Dia. Pin C-12 Dia. Pin Bi-fold Pins & Associated Parts A A = 4- B = C = A = 4-1/6 B = C = A = 4- B = C = C Pin Dia. C-11, C-12, C-13, C-19 C-10, C-12, C-13, C-16 C-13 Dia. Cap C-16
More informationDOOR REINFORCERS. For Cylindrical Door Locks with 2 1 / 8" hole, 9" height. 3-PB-CW /4" 9" 2 3 /4" 1 3 /8" S-CW
Published list prices, please login or contact a sales representative for your pricing. DON-JO Price Book, September 1, 2012 DOOR REINFORCERS Application Part No. Finish Overall Size Back Set Door Thickness
More informationSpokane Hardware Supply, Inc.
Cabinet Lighting Shelf/Closet Hardware Cabinet Catches Fasteners Door Locks FLEXIGRIP FRICTION CATCH Size: 1-5/16"L x 3/4"W x 5/8"H. Steel. HEAVY DUTY FLEXA DOOR CATCH Nylon with stainless steel spring
More informationDrake & Wrigley s extensive range of architectural hardware is produced entirely in commercial grade nonferrous metals, primarily solid brass, zinc and stainless steel. A wide choice of colours can also
More information33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
More informationINSTALLATION INSTRUCTIONS FOR PLASCORE NARROW STILE DOORS
INSTALLATION INSTRUCTIONS FOR PLASCORE NARROW STILE DOORS The following information is provided by Plascore, Inc., as a general guideline for the installation of the Plascore Narrow Stile Door and Jamb
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More informationMortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationMortise Locks. Narrow Mortise Locks Series NML Features Ordering String Functions Trim Sets Cylinders Strikes Specifications
2 Mortise Locks 2 b 3 4 6 16 28 29 30 Narrow Mortise Locks Series NML Features Ordering String Functions Cylinders Strikes Specifications 2016 02 FSB North America Narrow Mortise Lock NML Series Quality
More information14 Intex Price Guide. Suitable for use in Fire Rated Wall Systems
14 Intex Price Guide Suitable for use in Fire Rated Wall Systems O.50-0.55mm BMT W A L L T R A C K 0. 5 5 M M B M T A standard wall or floor track section which provides a friction fit for studs to fit
More informationMETAL BLINDS. Deluxe GETTING STARTED OPTIONAL HARDWARE. A few simple tools are required: STANDARD HARDWARE
METAL BLINDS Deluxe GETTING STARTED OPTIONAL HARDWARE A few simple tools are required: Steel Tape Measure Pencil Level Hold Down Brackets with Screws Extension Bracket Power Drill and Drill Bits Flathead
More informationINTRODUCTION Tools Required Laminate Washroom Products... 4 DUCT PANELS Fixing the Frame: Fixing the Shadow Panels...
Contents INTRODUCTION... 2 Tools Required... 3 Laminate Washroom Products... 4 DUCT PANELS... 4 Fixing the Frame:... 5 Fixing the Shadow Panels... 9 Fitting the Duct Panels:... 10 WASHSTATIONS... 15 Fixing
More informationAFTER SELECTING THE PRODUCT YOU REQUIRE, PLEASE ADD THE FOLLOWING: 4. CAM DETAILS... SEE AND PRODUCT DATA SHEET FOR DETAILS
Furniture Locks Specifying a product when ordering AFTER SELECTING THE PRODUCT YOU REQUIRE, PLEASE ADD THE FOLLOWING: 1. REMOVABLE BARREL SYSTEM.. PAGES 4.10-4.49 2. FIXED BARREL PRODUCTS... PAGES 4.50-4.99
More informationJK Spartacus Stamped Front Bumper
Page 1/14 OMIX-ADA TECHNICAL SUPPORT PHONE: M-F 8am - 5pm EST 1-800-449-6649 EMAIL: techsupport@omix-ada.com FOR WARRANTY INFORMATION VISIT: www.omix-ada.com Page 2/14 Part #11544.01 11544.09 11543.13
More informationSTANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 1350 COMBAT SERIES TOILET PARTITIONS IMPORTANT: Review these instructions thoroughly prior to installation. In the United States: BOBRICK WASHROOM EQUIPMENT INC. 200 Commerce
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationPLEATED SHADE ARCH INSIDE MOUNT GETTING STARTED. A few simple tools are required: STANDARD HARDWARE
HONEYCOMB AND PLEATED SHADE ARCH GETTING STARTED INSIDE MOUNT A few simple tools are required: HALF ARCH INSTALLATION Your half arch has been shipped in the closed osition. When fanned, the rails will
More information