Architectural Hinges, Continuous Hinges and Pivots

Transcription

1 Stops xterior Hardware Architectural Hinges, ontinuous Hinges and Pivots Table Of ontents Architectural Hinges page eneral Hinge Information A2 How to Order A3 ANSI Hinge Identification Reference A4 3P1 3 Knuckle, ull Mortise A Knuckle, ull Mortise A5 31HW 3 Knuckle, ull Mortise A6 3SP1 3 Knuckle, ull Mortise A6 5P1 5 Knuckle, ull Mortise A Knuckle, ull Mortise A7 51HW 5 Knuckle, ull Mortise A8 51WT 5 Knuckle, ull Mortise A Knuckle, ull Mortise A9 54HW 5 Knuckle, ull Mortise A9 51S 5 Knuckle, ull Mortise A10 51SHW 5 Knuckle, ull Mortise A10 lectrified Hinge A11 Residential Hinges A12 ontinuous Hinges A13 Pivots A31 A1 lush olts & oordinators Latches, atches & olts USA anada A1

2 Architectural Hinges, ontinuous Hinges and Pivots A2 lush olts & oordinators Latches, atches & olts Stops xterior Hardware eneral Hinge Information SLTION O TH PROPR WIHT AN ARIN TYP Standard Weight..... Plain earing Standard Weight..... all earing, oncealed earing Heavy Weight all earing, oncealed earing ONSIRATIONS TO TRMIN WIHT AN ARIN TYP: - Weight of oor - requency of use - rame - oor Hardware Always use ball bearing or concealed bearing hinges for doors with door closers and in all fire rated openings. Heavy weight doors and high frequency doors should use heavy weight ball bearing or concealed bearing hinges. UILINS OR HIN MTAL - Interior door or non-corrosive area use: Plated or painted Steel - Interior labeled door use: Plated or Painted Steel, Stainless Steel - Interior door in corrosive area use: Stainless Steel, rass, ronze - xterior doors use: Stainless Steel, rass, ronze Standard pin material are rass Hinge Steel Pin, Stainless Steel Hinge Stainless Steel Pin, Steel Hinge Steel Pin UILINS OR RQUNY O OOR USA: uild Type aily Usage Hinge Type High requency/ Heavy Weight oor Large epartment Store ntrance 5,000 Heavy Weight Hospital orridor and Surgical oors 5,000 Heavy Weight Large Office uilding ntrance 4,000 Heavy Weight School ntrance 1,250 Heavy Weight School Toilet oor 1,250 Heavy Weight Office Stairwell 500 Heavy Weight Office uilding Toilet oor 400 Heavy Weight Medium requency/ Medium Weight oor School orridor oor 100 Standard Weight Hospital onsultation Rooms 100 Standard Weight Office uilding orridor oor 80 Standard Weight Store Toilet oor 60 Standard Weight Storage Room 50 Standard Weight Low requency /Light oor Residential ntrance 30 Plain earing Interior Residential 20 Plain earing ANSI/HMA RA/MINIMUM YL RQUIRMNTS rade 1: 2,500,000 Heavy Weight all & oncealed earing rade 2: 1,500,000 Standard Weight all & oncealed earing rade 3: 350,000 Light Weight Plain earing ONSIRATIONS TO TRMIN HIN SIZ - oor Width - oor Thickness - Weight - learance UILINS OR HIN HIHT OOR THIKNSS OOR WITH HIN HIHT IN INHS IN INHS IN INHS 1-3/8 Up to /2 1-3/8 32 to /4 Up to /2 1-3/4 36 to /4 Over /2 Up to 42 5 heavy weight 2-2-1/2 Over 42 6 heavy weight LARAN RQUIRMNT* OOR THIKNSS LARAN N HIN OPN WITH 1-3/8 3/ / /4 1-1/2 4-1/2 1-3/ / / / / / / /2 3/ /2 1-3/ / /4 8 *istance needed between wall and door at 180º to allow for any projections from wall; trim, decorative molding, etc. UILINS OR NUMR O HINS - oors under 7'6" hinges - oors over 7'6" hinges LOATION O HINS 5" (127mm) 10" (254mm) qual Top hinge 5" from jamb rabbet to top of barrel ottom hinge 10" from bottom edge of barrel to finished floor Third hinge centered between top and bottom hinges Note: Some western states use a standard 7" from top and 11" from the bottom A2 USA anada

3 Architectural Hinges, ontinuous Hinges and Pivots Ives Hinge Number System Please note: or availability of specific models, please refer to the item s catalog page or consult ustomer Service. How to Order: HW 4.5x NRP A3 Number of Knuckles: 3-3 Knuckle 5-5 Knuckle unction: P Plain earing all earing oncealed earing SP Spring Hinge Type: 1 ull Mortise 2 Half Mortise 3 ull Surface 4 Half Surface Weight/Options: lank Standard Weight HW Heavy Weight S Swing lear SH Security Stud WT Wide Throw HT Hospital Tip R Round orners, 1/4" or 5/8" Radius Size xamples: 3.5 x x 5 4 x x x 4 5 x x x 5 5 x 6 5 x 7 Larger sizes, up to 6 x 8 are available. onsult factory. lush olts & oordinators Latches, atches & olts inish (Some models require extended lead times): 600 USP - Steel 605 US3 - rass 606 US4 - rass 612 US10 - rass 613 US10 - rass 619 US15 - rass 625 US26 - rass 626 US26 - rass 630 US32 - Stainless 632 US3 - Steel 633 US4 - Steel 639 US10 - Steel 640 US10 - Steel 641 US10A - Steel 643 US11 - Steel 646 US15 - Steel 651 US26 - Steel 652 US26 - Steel Special Pins Applications: NRP Non-Removable Pin TW4 our Wire TW8 ight Wire MON Monitor TW4M our Wire with Monitor TW8M ight Wire with Monitor USA anada A3 Stops xterior Hardware

4 Architectural Hinges A4 lush olts & oordinators Latches, atches & olts Stops xterior Hardware ANSI Hinge Identification Reference A = ANSI irst number indicates material 1 ast, forged or extruded brass or bronze 2 Wrought brass or bronze 5 Stainless steel 8 Wrought or forged steel, or malleable iron Second number indicates product type 1 ull mortise 2 Half mortise 3 ull surface 4 Half surface 5 Anchor, pivot reinforced or thrust pivot unit or hinge sets 6 Olive knuckle hinges 7 Pivot hinge 8 Rescue hardware Third number indicates function 1 Anti-friction bearing 2 Anti-friction bearing, swing clear 3 Plain bearing 4 4 to 0, special conditions ourth number indicates grade 1 rade 1, 4 xtra Heavy uty 2 rade 2, 2 Standard uty 3 rade 3, Plain earing xample: A8111 Steel, ull Mortise, Anti-friction, rade 1 A5112 Stainless, ull Mortise, Anti riction earing, rade 2 A4 USA anada

5 Architectural Hinges Meets ANSI/HMA A156.1 A8133 Steel A5133 Stainless Steel A2133 rass 3P1 3 Knuckle, Plain earing ull Mortise Hinge or standard weight doors Low frequency usage Packed with wood and metal screws Not for use with a door closer. Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security asteners - Pin-in-Socket imensions Size (Inches) Size (mm) auge 3.5 x x x x x x x x x x A5 lush olts & oordinators Meets ANSI/HMA A156.1 A8112 Steel A5112 Stainless Steel A2112 rass 31 3 Knuckle, oncealed earing ull Mortise Hinge or standard weight doors Medium frequency usage Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket imensions Size (Inches) Size (mm) auge 3.5 x x x x x x x x x x inishes brass Ives inish US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes steel Ives inish USP US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes stainless steel Ives inish US32 US32 HMA Latches, atches & olts Stops xterior Hardware USA anada A5

6 Architectural Hinges A6 lush olts & oordinators Latches, atches & olts Stops Meets ANSI/HMA A156.1 A8112 Steel A5112 Stainless Steel A2112 rass Meets ANSI/HMA A156.7 K81071 Steel K51071 Stainless Steel UL listed for use with fire rated doors 31HW 3 Knuckle, oncealed earing ull Mortise Hinge or heavy weight doors High frequency usage Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket imensions Size (Inches) Size (mm) auge 4.5 x x x x x x x x SP1 3 Knuckle Spring ull Mortise Hinge or automatic closing of doors Packed with wood and metal screws Options HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket imensions Size (Inches) Size (mm) auge 4 x x x x x x xterior Hardware inishes brass Ives inish US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA A6 inishes steel Ives inish USP US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes stainless steel Ives inish US32 US32 HMA USA anada

7 Architectural Hinges 5P1 5 Knuckle, Plain earing ull Mortise Hinge or standard weight doors Low frequency usage Packed with wood and metal screws Not for use with a door closer. A7 Meets ANSI/HMA A156.1 A8133 Steel A5133 Stainless Steel A2133 rass Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket imensions Size (Inches) Size (mm) auge 3.5 x x x x x x x x x x lush olts & oordinators Meets ANSI/HMA A156.1 A8112 Steel A5112 Stainless Steel A2112 rass 51 5 Knuckle, all earing ull Mortise Hinge or standard weight doors Medium frequency usage 2 ball bearing Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket imensions Size (Inches) Size (mm) auge 3.5 x x x x x x x x inishes brass Ives inish US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA Size (Inches) Size (mm) auge 5 x x x x inishes steel Ives inish USP US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes stainless steel Ives inish US32 US32 HMA Latches, atches & olts Stops xterior Hardware USA anada A7

8 Architectural Hinges A8 51HW 5 Knuckle, all earing, Heavy Weight ull Mortise Hinge or heavy weight doors High frequency usage 4 ball bearing Packed with wood and metal screws lush olts & oordinators Latches, atches & olts Meets ANSI/HMA A156.1 A8111 Steel A5111 Stainless Steel A2111 rass Meets ANSI/HMA A156.1 A8111 Steel Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket imensions Size (Inches) Size (mm) auge 4.5 x x x x WT 5 Knuckle, all earing, Wide Throw ull Mortise Hinge or medium weight doors Medium frequency usage 2 ball bearing Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket Size (Inches) Size (mm) auge 5 x x x x Stops xterior Hardware imensions Size (Inches) Size (mm) auge 4.5 x x x x x x x x x x inishes brass Ives inish US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA A8 inishes steel Ives inish USP US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes stainless steel Ives inish US32 US32 HMA USA anada

9 Architectural Hinges 54 5 Knuckle, all earing, Half Surface Hinge or standard weight doors Medium frequency usage 2 ball bearing Packed with through bolts, grommets and sheet metal screws A9 Meets ANSI/HMA A156.1 A8412 Steel Meets ANSI/HMA A156.1 A8411 Steel Options NRP, Non-Removable Pin HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket imensions Size (Inches) Size (mm) auge HW 5 Knuckle, all earing, Half Surface Heavy Weight Hinge or heavy weight doors High frequency usage 4 ball bearing Packed with through bolts, grommets and sheet metal screws Options NRP, Non-Removable Pin HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket lush olts & oordinators Latches, atches & olts imensions Size (Inches) Size (mm) auge inishes brass Ives inish US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA Stops xterior Hardware inishes steel Ives inish USP US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes stainless steel Ives inish US32 US32 HMA USA anada A9

10 Architectural Hinges A10 51S 5 Knuckle, all earing, Swing lear ull Mortise Hinge or standard weight doors Square edge standard Medium frequency usage 2 ball bearing Packed with flat head wood and metal screws esigned to completely clear the opening when door is opened 92 degrees. lush olts & oordinators Latches, atches & olts Meets ANSI/HMA A156.1 A8122 Steel A5122 Stainless Steel A2122 rass Options NRP, Non-Removable Pin, beveled edge door HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket imensions Size (Inches) Size (mm) auge SHW 5 Knuckle, all earing, Swing lear Heavy Weight ull Mortise Hinge or heavy weight doors eveled edge standard High frequency usage 2 ball bearing Packed with flat head wood and metal screws esigned to completely clear the opening when door is opened 92 degrees. Stops Meets ANSI/HMA A156.1 A8121 Steel Options NRP, Non-Removable Pin, beveled edge door HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket xterior Hardware imensions Size (Inches) Size (mm) auge inishes brass Ives inish US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes steel Ives inish USP US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes stainless steel Ives inish US32 US32 HMA A10 USA anada

11 Architectural Hinges UL Listed - UL634 Meets ANSI/HMA A156.1 A8111 Steel A5111 Stainless Steel A2111 rass lectrified Hinge Available Options - Through Wire - TW4 (4 wires) & TW8 (8 wires) - Monitor MON - Through Wire with Monitor TW4M & TW8M Available in 3 and 5 Knuckle One hinge per box, packed with wood and machine screws Hinge is NRP as a standard High quality brass ferrules and plastic tubing protect the wires Through-wire hinges cycle tested to ensure durability Ives warranty applies - 12 months from date of shipment Through-Wire is rated for 50 volts A/ at 3.5 amp continuous and 16 amp pulse, maximum pulse 400 mili second. Monitor rated 30V at.5 amp inishes brass Ives inish US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes steel Ives inish USP US3 US4 US10 US10 US10A US11 US15 US26 US26 HMA inishes stainless steel Ives inish US32 US32 HMA A11 lush olts & oordinators Latches, atches & olts Stops xterior Hardware USA anada A11

12 Architectural Hinges A12 xterior Hardware Stops lush olts & oordinators Latches, atches & olts 1010 Schlage arded Only 1012 Schlage arded Only Schlage arded Only 1000 Series Residential Hinges ull mortise hinges in 2 sizes: 3-1/2" and 4". Two corner options: Square corners and 5/8" or 1/4" radius corners. Substrates include: Steel. Model Size orner /2" x 3-1/2" Square orner /2" x 3-1/2" 5/8" Radius orner /2" x 3-1/2" 1/4" Radius orner " x 4" Square orner " x 4" 5/8" Radius orner inishes steel Ives inish * 625** 716 HMA * not available on 1012 hinge * only available on Schlage arded Only A12 USA anada

13 ontinuous Hinges Ives ontinuous Hinges are designed to last the life of the building. The unique design distributes the weight of the door along the entire length of the frame, reducing the high amount of stress normally associated at top of door and frame on butt hinge applications. Not only does this reduce hinge failure, it also keeps your door in constant alignment, eliminating the chance of door sag. These characteristics make continuous hinges suitable for high use/high traffic doors. The design of a continuous hinge eliminates the gap between the door and the frame. The absence of gap also helps prevents finger from being pinched, making it a safer device than traditional hinges. These benefits result in higher efficiency and less maintenance, maximizing the value of your opening investment. ontinuous hinges are available in two styles; aluminum geared and pin and barrel in steel or stainless steel. ontinuous Hinge Table Of ontents page ontinuous Hinge Types A14 ross Reference uide a15 A13 lush olts & oordinators USA anada Aluminum eared Hinges eneral Information A16 lectrified Options A16 How to Order A17 oor Sizing A18 045H Half Surface A19 046H Half Surface A19 053H Half Surface A20 054H Half Surface A20 112H ull Mortise A21 157H ull Surface, enter Pivot A21 210H ull Surface, Swing lear a22 224H ull Mortise, dge Protector A22 lectrical utouts a23 Pin and arrel Hinges eneral Information A24 lectrified Options A24 How to Order A25 oor Sizing A26 600, ull Mortise A27 602, ull Surface A27 611, Swing lear a ull Mortise, ull Wrap A ull Mortise, ull Wrap A29 lectrical utouts a30 A13 Latches, atches & olts Stops xterior Hardware

14 ontinuous Hinges A14 lush olts & oordinators xterior Hardware Stops Aluminum eared eared continuous hinges utilize a single gear section for the leaf and a separate gear section for the frame side of the door. The two are held in place together by a full length cover channel and rotate on a series of bearings. Latches, atches & olts Pin and arrel Pin and arrel hinges share many of the same characteristics of a traditional hinge. oth have a center pin and rolled knuckles. However, a continuous Pin and arrel hinge stretches along the entire length of the frame. IVS offers both stainless steel and primed steel to best match your specific application. Lifetime Warranty Ives continuous hinges carry a limited lifetime warranty, ensuring your opening will function to your satisfaction every time. A14 USA anada

15 ontinuous Hinges ross Reference uide A15 Ives Hager Markar McKinney Pemko Select Stanley eared 045H H 046H H 053H H 054H H 112H H MK-12H MSLH SL11H 661H 210H H MK-22H SH SL21H 665H 224H H MK-25H MH SL24H 662H 157H H MK-58H SPH SL57H 664H Pin and arrel 600 M200 SL S N/A M300 SL S302 SL H305 SL H311 SL H lush olts & oordinators Latches, atches & olts Stops xterior Hardware USA anada A15

16 ontinuous Hinges A16 Aluminum eared Hinges eneral Information Material 6063-T6 Aluminum lush olts & oordinators Latches, atches & olts Stops Standard Lengths 83", 85", 95", 120" ustom lengths are available up to 120", consult factory. inishes L - US28 (628) lear Anodized R - 313AN (710) ark ronze Hinge uty All Ives Aluminum eared Hinges are Heavy uty (H). Amount of bearings varies by size: 83" 32 earings 85" 32 earings 95" 36 earings 120"- 47 earings oor Weight ach hinge can hold a door up to 450 lbs (Rivet nuts recommended) and a max door width of 4'0". ANSI ertified All Ives Aluminum eared Hinges are certified to ANSI , rade 1 UL Listed All Ives Aluminum eared Hinges are tested and approved UL 10 (90 minutes). ield Modifications: All Ives Aluminum eared ontinuous Hinges can be cut to length during installation. The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. lectrification Options Only available for the full mortise hinges xterior Hardware lectric Power Transfer (PT) lectric power transfer provides a means of transferring power from the door frame to the edge of a swinging door. Ives ontinuous Hinges provide standard cut outs to fit Von uprin PT-2, PT-10 and PNT-1 devices. onsult factory for other electrical cut out options. lectrical Through-Wire (TW) Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts A/ at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives thru-wire hinges are fully compatible with 4 wire and 8 wire installations. A16 USA anada

17 ontinuous Hinges Aluminum eared Hinges How to Order: A17 112H - L PT Model 045H 046H 053H 054H 112H 157H 210H 224H inish L R Half Surface Half Surface Half Surface Half Surface ull Mortise ull Surface - enter Pivot ull Surface - Swing lear ull Mortise - dge Protector lear ronze Length 83" 85" 95" 120" Other lengths available up to 120", consult factory. Handing required. lush olts & oordinators Latches, atches & olts Options * PT lectric Power Transfer Prep * TW8 lectric Through Wire S Security asteners - Pin-in-Socket W Wood asteners HM Thread forming screws (pilot hole required) * ull Mortise Models Only Stops xterior Hardware USA anada A17

18 ontinuous Hinges A18 Aluminum eared Hinges - learance Requirements Hinge Side learance 1/8 Hinge Side learance 3/16 Hinge Side learance lush olts & oordinators 1/32 rame Irregularity 1/16 rame Irregularity Latches, atches & olts Stops xterior Hardware SINL OOR oor Under-Sizing Hinge-Side Lock-Side rame eveled oor Square eveled Model learance learance Irregularity learance dged dged 045H 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 046H 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 053H 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 054H 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 112H 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 224H 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 210H 1/16" 1/8" 1/32" 1/32" 7/32" 1/4" 157H 1/16" 1/8" 1/32" 1/32" 7/32" 1/4" PAIR O OORS oor Under-Sizing Square Square eveled eveled Hinge-Side Lock-Side rame eveled oor dged dged dged dged Model learance learance Irregularity learance Total ach oor Total ach oor 045H 5/32" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 046H 5/32" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 053H 5/32" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 054H 5/32" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 112H 5/16" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 224H 5/16" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 210H 1/16" 3/16" 1/16" 1/16" 3/8" 3/16" 7/16" 7/32" 157H 1/16" 3/16" 1/16" 1/16" 3/8" 3/16" 7/16" 7/32" Templates and installation instructions available on line at ives.ingersollrand.com A18 USA anada

19 ontinuous Hinges 045H Half Surface ontinuous Hinge Half surface for retrofit or new construction Non-handed rame leaf depth 1-9/16" 9/32" door inset A19 Standard lengths 83", 85", 95", 120" Standard Mounting Hardware x 1/2" steel self tapping screw 1/4-20 x 1-1/2" AL Sex olt 1/4-20 x 1" Steel Shoulder olt x 3/4" Steel Self rilling Shoulder olt Optional S-Security asteners available inishes lear (L), ark ronze () ustom Anodizing and Painting are available, consult factory. 2-9/32" 1-9/16" 3-1/16" 1-9/32" lush olts & oordinators 046H Half Surface ontinuous Hinge Half surface for retrofit or new construction Non-handed rame leaf depth 1-15/16" 9/32" door inset Standard lengths 83", 85", 95", 120" Standard Mounting Hardware x 1/2" steel self tapping screw 1/4-20 x 1-1/2" AL Sex olt 1/4-20 x 1" Steel Shoulder olt x 3/4" Steel Self rilling Shoulder olt Optional S-Security asteners available inishes lear (L), ark ronze () ustom Anodizing and Painting are available, consult factory. USA anada /32" learance for Square dge oor 3/16" learance or eveled dge oor 2-5/8" 1-15/16" 5/32" learance for Square dge oor 3/16" learance or eveled dge oor 3-1/16" 1-9/32" A19 Latches, atches & olts Stops xterior Hardware

20 ontinuous Hinges A20 053H Half Surface ontinuous Hinge Half surface for retrofit or new construction Non-handed rame leaf depth 1-9/16" 1/8" door inset lush olts & oordinators Standard lengths 83", 85", 95", 120" Standard Mounting Hardware x 1/2" steel self tapping screw 1/4-20 x 1-1/2" AL Sex olt 1/4-20 x 1" Steel Shoulder olt x 3/4" Steel Self rilling Shoulder olt Optional S-Security asteners available inishes lear (L), ark ronze () ustom Anodizing and Painting are available, consult factory. 2-9/32" 1-9/16" 2-1/8" 1-5/32" Latches, atches & olts Stops 054H 5/32" learance for Square dge oor 3/16" learance or eveled dge oor Half Surface ontinuous Hinge Half surface for retrofit or new construction Non-handed rame leaf depth 1-15/16" 1/8" door inset xterior Hardware A20 Standard lengths 83", 85", 95", 120" Standard Mounting Hardware x 1/2" steel self tapping screw 1/4-20 x 1-1/2" AL Sex olt 1/4-20 x 1" Steel Shoulder olt x 3/4" Steel Self rilling Shoulder olt Optional S-Security asteners available inishes lear (L), ark ronze () ustom Anodizing and Painting are available, consult factory. 2-5/8" 1-15/16" 5/32" learance for Square dge oor 3/16" learance or eveled dge oor 2-1/8" 1-5/32" USA anada

21 ontinuous Hinges 112H ull Moritse Aluminum eared ontinuous Hinge Non Handed lush Mounted, No Inset 48" Maximum oor Width eveled or Square dge oors or oors Weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing A21 Standard lengths 83", 85", 95", 120" Standard Mounting Hardware X 3/4" Steel Self rilling, Self Tapping Screws Optional W - Wood Screws or S - Security asteners Available inishes lear (L), ark ronze () ustom Anodizing and Painting are available, consult factory. lush olts & oordinators 157H 5/16" learance for Square dge oor 1/32" learance or eveled dge oor ull Surface, enter Pivot Aluminum eared ontinuous Hinge Non Handed Narrow rame 1/16" oor Inset 48" Maximum oor Width eveled or Square dge oors or oors Weighing up to 600 pounds Standard lengths 83", 85", 95", 120" Standard Mounting Hardware X 1/2" Steel Self Tapping Screws, 1/4-20 X 1-1/2" AL Sex olt, 1/4-20 X 1" Steel Shoulder olt, X 3/4 Steel Self rilling, Optional S - Security asteners Available inishes lear (L), ark ronze () ustom Anodizing and Painting are available, consult factory. 1/16" learance for Square dge oor 3/32" learance or eveled dge oor Latches, atches & olts Stops xterior Hardware USA anada A21

22 ontinuous Hinges A22 210H ull Surface, Swing lear Aluminum eared ontinuous Hinge Non Handed 1/32" oor Inset 48" Maximum oor Width eveled or Square dge oors or oors Weighing up to 600 pounds lush olts & oordinators Standard lengths 83", 85", 95", 120" Standard Mounting Hardware X 1/2" Steel Self Tapping Screws, 1/4-20 X 1-1/2" AL Sex olt 1/4-20 X 1" Steel Shoulder olt, X 3/4" Steel Self rilling, Optional S - Security asteners Available inishes lear (L), ark ronze () ustom Anodizing and Painting are available, consult factory. Latches, atches & olts Stops 224H 1/16" learance for Square dge oor 3/32" learance or eveled dge oor ull Mortise Aluminum eared ontinuous Hinge Non Handed oor dge Protector 48" Maximum oor Width 1/16" oor Inset eveled or Square dge oors or oors Weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing xterior Hardware Standard lengths 83", 85", 95", 120" Standard Mounting Hardware X 3/4" Steel Self rilling, Self Tapping Screws Optional W - Wood Screws or S - Security asteners Available inishes lear (L), ark ronze () ustom Anodizing and Painting are available, consult factory. A22 5/16" learance for Square dge oor 1/32" learance or eveled dge oor USA anada

23 ontinuous Hinges PT 112H Top of hinge/door PT 224H Top of hinge/door lectrical utouts Ives Aluminum eared ontinuous Hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. T A23 PT L PT L When ordering indicate the following: 1. Opening size. 2. Handing. LH, RH, RHR or LHR. 3. Manufacturer and model number of the electrical product being used. xample; Von uprin PT2 ecause clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives ustomer Technical for specific template information. or your general information below are standard locations for Von uprin PT2 or PT10, and monitor switch. rom Top dge of oor to enter Line of ut-out lush olts & oordinators TW 112H 224H Standard 112H 224H 112H/224H Length PT PT TW 83" 30" 30" 41-1/2" 85" 32" 32" 42-1/2" 95" 42" 42" 57-3/4" 120" 67" 67" 81-25/32" Latches, atches & olts Top of hinge/door TW L Stops xterior Hardware USA anada A23

24 ontinuous Hinges A24 lush olts & oordinators Latches, atches & olts Stops xterior Hardware Pin and arrel Hinges eneral Information Standard Lengths 83", 85", 95", 120" ustom lengths are available up to 120", consult factory. inishes US32 (630) Satin Stainless Steel USP (600) Steel, Primed for Paint arrel Type Twin Self Lubricated Nylon earings with Stainless Steel Pin. oor Weight ach hinge can hold a door up to 600 lbs (Rivet nuts recommended) and a max door width of 4'0". ANSI ertified All Ives Pin and arrel Hinges certified to ANSI , rade 1. UL Listed All Ives Steel and Stainless Steel Pin and arrel Hinges are tested and approved UL 10 (3 hr). ield Modifications All Ives Pin and arrel ontinuous Hinges can be cut to length during installation. If more than 6" from bottom of hinge, additional modifications may be necessary. lectrification Options Only available for the ull Mortise Hinges lectric Power Transfer (PT) lectric power transfer provides a means of transferring power from the door frame to the edge of a swinging door. Ives ontinuous Hinges provide cut outs to fit Von uprin PT-2, PT-10 and PNT-1 devices. onsult factory for other PT cut out options. lectrical Through-Wire (TW) Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated for 3.5 amp continuous and 16 amp pulse. Ives thru-wire are fully compatible with 4 wire and 8 wire installations. A24 USA anada

25 ontinuous Hinges Pin and arrel Hinges A25 How to Order: US PT Model Stainless Steel 700 ull Mortise 702 ull Surface - enter Pivot 705 ull Mortise - ull Wrap 711 ull Surface - Swing lear 715 ull Mortise - Half Wrap Steel 600 ull Mortise 602 ull Surface - enter Pivot 611 ull Surface - Swing lear inish Stainless Steel US32 (630) lush olts & oordinators Latches, atches & olts Steel USP (600) Primed Length 83" 85" 95" 120" Other lengths available up to 120, consult factory. Handing is required. Options * PT lectric Power Transfer Prep * TW8 lectric Through Wire * TW4M, TW8M lectric Through Wire + Monitoring S Security asteners - Torx W Wood asteners * ull Mortise Models Only Stops xterior Hardware USA anada A25

26 ontinuous Hinges A26 Pin and arrel Hinges - learance Requirements 1/8 Hinge Side learance 3/16 Hinge Side learance lush olts & oordinators Latches, atches & olts Stops xterior Hardware Hinge Side learance 1/32 rame Irregularity SINL OOR oor Under-Sizing Hinge-Side Lock-Side rame eveled oor Square eveled Model learance learance Irregularity learance dged dged 600 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 602 1/8" 1/8" 1/32" 1/32" 9/32" 5/16" 700 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 702 1/8" 1/8" 1/32" 1/32" 9/32" 5/16" 705 3/8" 1/8" 1/32" 1/32" 17/32" 9/16" 705* 1/2" 1/8" 1/32" 1/32" 21/32" 11/16" 711 7/32" 1/8" 1/32" 1/32" 3/8" 13/32" 715 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" * Use the Adjusta-Studs with 705 1/16 rame Irregularity PAIR O OORS oor Under-Sizing Square Square eveled eveled Hinge-Side Lock-Side rame eveled oor dged dged dged dged Model learance learance Irregularity learance Total ach oor Total ach oor 600 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 602 1/8" 3/16" 1/16" 1/16" 1/2" 1/4" 9/16" 9/32" 700 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 702 1/8" 3/16" 1/16" 1/16" 1/2" 1/4" 9/16" 9/32" 705 3/8" 3/16" 1/16" 1/16" 1" 1/2" 1-1/16" 17/32" 705* 1/2" 3/16" 1/16" 1/16" 1-1/4" 5/8" 1-5/16" 21/32" 711 7/32" 3/16" 1/16" 1/16" 11/16" 11/32" 3/4" 3/8" 715 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" * Use the Adjusta-Studs with 705 A26 USA anada

27 ontinuous Hinges ull Mortise Pin and arrel ontinuous Hinge or oors Weighing up to 600 pounds Non Handed 1/8 Inset 48" Maximum oor Width Non Handed evel or Square dge oor A27 Standard lengths 83", 85", 95", 120" Standard Mounting Hardware #10 X 1/2" Self rilling Self Tapping Screws, #10 X 1" Wood Screws Optional S - Security asteners Available 3 / 8 1/8" 1 / 2 Material old-rolled Steel auge Type 304 Stainless Steel 1/4" iameter 304 Stainless Pin with Nylon Split earing inishes HMA US Numbers USP US32 ustom Paint Available, on 600 consult factory. USA anada / 4 A H i n g e T h i c k n e s s ull Surface Pin and arrel ontinuous Hinge or oors Weighing up to 600 pounds Non Handed lush Mounted, No Inset 48" Maximum oor Width evel or Square dge oor Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 1/4"-20 x 3/4" Self rilling Self Tapping Screws, over lips Optional S - Security asteners Available Material old-rolled Steel auge Type 304 Stainless Steel 1/4" iameter 304 Stainless Pin with Nylon Split earing rushed Aluminum Leaf overs inishes HMA US Numbers USP US32 ustom Paint Available, on 602 consult factory 7/16 1/ 4 1-3/4 1-3/4 A Hinge Thickness 1/ 8 1 / 8 1 / 16 learance for Square dge 1-3 / 4 5/16" learance for eveled dge learance for Square dge 3 / / 4 5/32" learance for eveled dge A27 lush olts & oordinators Latches, atches & olts Stops xterior Hardware

28 ontinuous Hinges A Swing lear Pin and arrel ontinuous Hinge or oors Weighing up to 600 pounds Non Handed dge uard 48" Maximum oor Width Square dge oor Standard lengths 83", 85", 95", 120" Standard Mounting Hardware #10 X 1/2" Self rilling Self Tapping Screws #10 X 1" Wood Screws Optional S - Security asteners Available lush olts & oordinators Latches, atches & olts Stops Material old-rolled Steel auge Type 304 Stainless Steel 1/4" diameter 304 stanless pin with nylon split bearings inishes HMA US Numbers USP US32 ustom Paint Available, on 611 consult factory 1 / / 8 1-9/ ull Moritse, ull Wrap Pin and arrel ontinuous Hinge or oors Weighing up to 600 pounds Non Handed lush Mounted, No Inset 48" Maximum oor Width ull Wrap dge uard evel or Square dge oor A H i n g e T h i c k n e s s 3 / 4 3 / / 4 7/32" 5 / learance for Square dge 1/4" learance for eveled dge xterior Hardware A28 Standard lengths 83", 85", 95", 120" Standard Mounting Hardware #10 X 1/2" Self rilling Self Tapping Screws, #10 X 1" Wood Screws Adjusta-stud 1-3/8" with internal thread Optional S - Security asteners Available. Material 14 auge Type 304 Stainless Steel 1/4" diameter 304 stanless pin with nylon split bearings inishes HMA 630 US Numbers US32 A H i n g e T h i c k n e s s 2-1/4 1-7/8 Note: Provide Adjustment A * Adjusta-Stud allows up to 3/8 width adjustment which ensures proper alignment and easy installation. Adjusta-Stud also makes it possible for future adjustments of the door on the frame through repositioning. A / 4 3 / / 4 3/16 3/ 8 3/8" learance for Square dge 13/32" learance for eveled dge USA anada

29 Stops xterior Hardware ontinuous Hinges 715 ull Mortise, Half Wrap Pin and arrel ontinuous Hinge or oors Weighing up to 600 pounds Non Handed lush Mounted, No Inset Half Wrap dge uard 48" Maximum oor Width Square dge oor Standard lengths 83", 85", 95", 120" Standard Mounting Hardware #10 X 1/2" Self rilling Tek Screws, #10 X 1" Wood Screws Optional S - Security asteners Available A29 Material 14 auge Type 304 Stainless Steel 1/4" diameter 304 stanless pin with nylon split bearings inishes HMA / 4 A H i n g e T h i c k n e s s 3 / 8 lush olts & oordinators US Numbers US32 ustom Paint Available, consult factory 3 / 4 1/4" / 4 learance for Square dge 1-3 / 4 Latches, atches & olts 4/32" learance for eveled dge USA anada A29

30 ontinuous Hinges A30 lectrical utouts Ives Pin & arrel ontinuous Hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. PT 600/700 TW 600/700 Top of door Top of door PT L TW L When ordering indicate the following: 1. Opening size. 2. Handing. LH, RH, RHR or LHR. 3. Manufacturer and model number of the electrical product being used. xample; Von uprin PT2 lush olts & oordinators ecause clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives ustomer Technical for specific template information. or your general information following are standard locations for Von uprin PT2 or PT10, and TW (through wire) Latches, atches & olts Standard centerline cutout locations Stops rom Top dge o top of oor to enter Line of ut-out xterior Hardware Standard Length PT TW 83" 30" 43-19/32" 85" 32" 45-17/32" 95" 42" 55-17/32" 120" 67" 80-17/32" A30 USA anada

31 Pivots The door rests on the bottom pivot in this application. This reduces the stress on the frame by distributing the weight of the door throughout the floor and structure. y taking advantage of the strength of the structure, this makes a pivot the ideal solution for your heavy doors. enter and pocket pivots also provide an aesthetic option for your opening. Pivots Table Of ontents page eneral Information A32 Selection hart and Parts Reference A32 How To Order A /4" Offset A V /4" Offset A , /4" Offset A /4" Offset A , /4" Offset A , /4" Offset A /4" Offset A /4" Offset A /2" Offset A /2" Offset A V-7222 INT....Intermediate A INT....Intermediate A INT.Intermediate A INT Intermediate A INT Intermediate A PT-7226PT-7227PT.Intermediate, lectrified a enter Hung A enter Hung A J enter Hung A enter Hung A enter Hung A49 Pocket Pivots A A50 A31 lush olts & oordinators Latches, atches & olts Stops xterior Hardware USA anada A31

32 Pivots A32 lush olts & oordinators Latches, atches & olts 7200 Series Pivots eneral Information: omplete line of 3/4" offset, 1-1/2" offset, center hung, intermediate and power transfer pivots with all exposed parts made of brass or stainless steel for maximum corrosion resistance. High strength brass and stainless steel forgings, and castings for rated and non-rated doors combined with precision bearings for smooth operation. Stainless steel machine screws and wood screws standard. Positive locking vertical adjustment mechanism allows the installer to precisely position the door and balance the load. Last digit in pivot set number reflects the maximum door weight in hundreds of pound, e.g., 7215 = 500 pounds. or sets designated as heavy duty, add 1,000 pounds, e.g., 7237 H set = 1700 pounds. Pivots for lead lined doors are available, consult factory series Pivot Selection hart Pivot Pivot Type ottom Mounting UL Listing Max. oor Handing When Ordering Separate Parts Set Style Weight Top ottom Intermediate /4" Offset Jamb Mounted none 200 LH or RH TOP 7212 TM V-7222 INT 7212V 3/4" Offset Jamb Mounted none 200 LH or RH 7212V TOP 7212 TM V-7222 INT /4" Offset Jamb Mounted 20 Minute 500 LH or RH TOP 7215 TM INT /4" Offset Jamb Mounted 3 Hour 500 LH or RH TOP 7215 TM INT /4" Offset loor Mounted none 200 LH or RH TOP 7222 TM V-7222 INT Stops /4" Offset loor Mounted 20 Minute 600 Non-Handed TOP 7226 TM INT /4" Offset loor Mounted 3 Hour 600 Non-Handed TOP 7226 TM INT /4" Offset Mortise ement ase 20 Minute 700 Non-Handed TOP 7227 TM INT /4" Offset Mortise ement ase 3 Hour 700 Non-Handed TOP 7227 TM INT /4" Offset loor Mounted 3 Hour 1,000 Non-Handed TOP 7230 TM INT xterior Hardware /4" Offset Mortise ement ase 3 Hour 1,750 Non-Handed TOP 7237 TM INT /2" Offset loor Mounted 3 Hour 400 Non-Handed TOP 7244 TM INT /2" Offset Mortise ement ase 3 Hour 500 Non-Handed TOP 7245 TM INT 7253 enter Hung loor Mounted none 300 Non-Handed J-7256 TOP 7253 TM INT 7255 enter Hung loor Mounted none 500 Non-Handed J-7256 TOP 7255 TM none 7255J enter Hung Jamb Mounted none 500 Non-Handed J-7256 TOP 7255J TM none 7256 enter Hung Mortise ement ase none 600 Non-Handed J-7256 TOP 7256 TM none 7259 enter Hung Mortise ement ase none 1,000 Non-Handed 7259 TOP 7259 TM none A32 USA anada

33 Pivots How to Order: Pivot: V J Pivot Style: lank Top and bottom set TOP Top pivot only TM ottom pivot only INT Intermediate pivot only PT INT Power transfer intermendiate pivot only Hand: LH RH Left hand door Right hand door LH US3 A33 lush olts & oordinators Latches, atches & olts inish: US3 US4 US10 US10 US26 US26 SP4 SP10 SP28 SP313 SPLK USP optional finishes are available, consult factory Stops xterior Hardware USA anada A33

34 Pivots A34 xterior Hardware /4" Offset Pivot Handed Top, header mount ottom, jamb mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 200 pounds Vertical adjustment range 3/16", with positive locking Optional V-7222 Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Meets ANSI/HMA A lush olts & oordinators Latches, atches & olts 7212V Pivot Set 7212V 3/4" Offset Pivot Handed Top, jamb mount ottom, jamb mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 200 pounds Vertical adjustment range 3/16", with positive locking Stops Optional V-7222 Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. A34 Plated inishes brass US Number US3 US4 US10 US10 US26 US26 HMA Number Painted inishes brass US Number SP4 SP10 SP28 SP313 SPLK HMA Number USA anada

35 Latches, atches & olts Pivots /4" Offset Pivot Handed Top, header mount ottom, jamb mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 500 pounds Vertical adjustment range 3/16", with positive locking WP - optional weather resistant bottom pivot is modified for improved corrosion resistance. Available in US26 (626) or US32 (630) only. A35 Meets ANSI/HMA A Ul Listed 20 minute fire doors UL Listed 3 hour fire doors Optional or Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Optional 7215PT Power Transfer, non-load bearing. See page A49 lush olts & oordinators 7215 Plated inishes brass US Number US3 US4 US10 US10 US26 US26 HMA Number Painted inishes brass US Number SP4 SP10 SP28 SP313 SPLK HMA Number Plated inishes steel US Number US3 US10 US32 US32 HMA Number Painted inishes steel US Number SP4 SP10 SP28 SP313 SPLK HMA Number Stops xterior Hardware USA anada A35

36 Pivots A36 Stops lush olts & oordinators Latches, atches & olts Meets ANSI/HMA A /4" Offset Pivot Handed Top, header mount ottom, base plate mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 200 pounds Vertical adjustment range 3/16", with positive locking Optional V-7222 Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. xterior Hardware Plated inishes brass US Number US3 US4 US10 US10 US26 US26 HMA Number Painted inishes brass US Number SP4 SP10 SP28 SP313 SPLK HMA Number A36 USA anada

37 Latches, atches & olts Pivots /4" Offset Pivot Non-handed Top, header mount ottom, base plate mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 600 pounds Vertical adjustment range 3/16", with positive locking A37 Meets ANSI/HMA A Ul Listed 20 minute fire doors UL Listed 3 hour fire doors Optional or Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Optional 7226PT Power Transfer (four wires), non-load bearing. See page A49 lush olts & oordinators 7226 Plated inishes brass US Number US3 US4 US10 US10 US26 US26 HMA Number Painted inishes brass US Number SP4 SP10 SP28 SP313 SPLK HMA Number Plated inishes steel US Number US3 US10 US32 US32 HMA Number Painted inishes steel US Number SP4 SP10 SP28 SP313 SPLK HMA Number Stops xterior Hardware USA anada A37

38 Latches, atches & olts Pivots A /4" Offset Pivot Non-handed Top, header mount ottom, base plate mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 700 pounds Vertical adjustment range 3/16", with positive locking lush olts & oordinators Meets ANSI/HMA A Ul Listed 20 minute fire doors UL Listed 3 hour fire doors Optional or Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Optional 7227PT Power Transfer (four wires), non-load bearing. See page A49. Stops xterior Hardware 7227 Plated inishes brass US Number US3 US4 US10 US10 US26 US26 HMA Number Painted inishes brass US Number SP4 SP10 SP28 SP313 SPLK HMA Number Plated inishes steel US Number US3 US10 US32 US32 HMA Number Painted inishes steel US Number SP4 SP10 SP28 SP313 SPLK HMA Number A38 USA anada