NEW! EX, H & X SERIES PUSH-PULL WITH HIP PADDLE OR HANDLE EXTENSION FOR MOST 6000, 6600 AND 6700 MODELS J PUSH/PULL SERIES WITH JUNIOR COVER

Transcription

1 EX, H & X SERIES PUSH-PULL WITH HIP PADDLE OR HANDLE EXTENSION FOR MOST 6000, 6600 AND 6700 MODELS EX SERIES Patent No. 5,70,7 6,96,599 H SERIES Patent No. 5,70,7 6,96,599 X SERIES Patent No. 5,70,7 6,96,599 EX Series - 6 extended handle PSEX6000 Pushside extended handle PLEX6000 Pullside extended handle PPEX6000 Both sides extended handles Available in stainless steel only Ideal for hospital scrub rooms and restaurant kitchen doors H Series - oversize paddle on push side trim - Available in most BHMA finishes Also available on 600 series Ideal for hospital scrub rooms and restaurant kitchen doors Prefix H X Series - handle extension - one side Ideal for hospital scrub rooms and restaurant kitchen doors Prefix X J PUSH/PULL SERIES WITH JUNIOR COVER Patent No. 5,70,7 6,96,599 Compact -/ x -/ cover for handles Recommended for / clearance between the cover and jamb stop for -/ backset and mortise lock models when handles are mounted horizontally Available for All series (except 600) (prefix J) Available in most BHMA finishes ROUND COVER SERIES PUSH/PULL WITH ROUND COVER RC6000 RC6600/RC6700 RC600 60LB ROLLER LATCH CONVERSION Non-handed covers Covers can be used on both sides of unit Available in all BHMA finishes Available for all Push/Pull Latch units Ideal for use in psychiatric facilities for patient safety Security screws available Patent pending Prefix RC NEW! Roller latch conversion kit allows a roller latch to be converted to standard spring latch using existing screws and door prep Kit contains roller latch bracket and full lip, -7/ ASA or -/ T strike as required Kit can be ordered separately or as part of 6000 or 600 hospital push/pull trim Spring latch not included STRIKES FOR 6000 SERIES - (Contact Factory for Custom Strikes) 6055 FULL LIP STRIKE -/ x -/ 0 -/ -5/ T STRIKE 605 -/ x -/ EXTENDED LIP / x -5/ 0 -/ -/ -5/ ASA STRIKE / x -/ EXTENDED LIP / x -/ / x -5/ 660RL For 6600 Mortise Lock Series 6059RL For 6000 Cylindrical Latch Bolt Series ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS. 9

2 ELECTRO-MAGNETIC DOOR HOLDERS The 000 Series Electro-magnetic Door Holders is Tri-Voltage. Each model (except 500) can be wired V DC, V AC/DC or 0V AC. Units can be used on fire/smoke barrier doors held open until released by a remote switching device. They can also be used to just hold a door open. The armature is thru-bolted to the door for security and can be provided with any projection required. When ordering indicate model, total projection, finish and door thickness if other than -/. 0-5 pound holding power (except lbs.) Underwriters US and Canada Listed California State Fire Marshal Listed New York City MEA ANSI/BHMA 56.5 Most models available in US, sprayed finishes and USD Easy wire installation with quick insert connector Armature has 60o Mobility No Plastic Parts 00 RECESSED WALL MOUNT -/ -5/ -5/ -5/ D. -5/ D. -5/ with extension Extension Provided BHMA C SURFACE WALL MOUNT -/ -5/ -5/ -5/ D. -5/ with extension Extension Provided 00 FLUSH WALL MOUNTED / -/ -/ BHMA C000-5/ -5/ D. -5/ with extension Extension Provided BHMA C000 00L FLUSH WALL MOUNTED -/ / 7/ -/ BHMA C000 0 ABH Manufacturing, Inc. AVAILABLE ON TARGET- Q UICK S HIP. S EE ; Fax INSIDE COVER FOR DETAILS.

3 500 SURFACE WALL MOUNTED 00 LBS. Holding Force -7/ AC/DC -9/6-5/ -/ -5/ D. BHMA C SINGLE FLOOR MOUNT -7/ -5/ -/6-5/ D. BHMA C DOUBLE FLOOR MOUNT -7/ -5/ -/6-5/ D. BHMA C000 ARMATURE EXTENSIONS S000 - Length as requested (over 0 ) / (00) / (0050) (000) 00 / (0075) (000) (000) 0O Swivel Extension (0600) PERFORMANCE DATA MODEL VOLTS mamps VA 00, 00 00, 600, L DC AC DC 0AC AC/DC ABH Manufacturing, Inc. AVAILABLE ON TARGET- Q UICK S HIP. S EE ; Fax INSIDE COVER FOR DETAILS.

4 PIVOT / PIVOT SETS OFFSET PIVOT SETS Pivot sets include top and bottom pivots. Offset pivot sets are handed and require an intermediate pivot to accommodate the door weights listed for each set. Door edges must be beveled / in. All sets are available in standard architectural finishes / offset For interior doors up to 0 x 0 Weight to 00 lbs. 00 top pivot included 09 intermediate pivot required Bottom pivot mortised into floor USD models listed for use on hour fire doors Extended spindles available BHMA/ANSI C076/50A (modified) / offset For interior doors up to 0 x 6 For exterior doors up to 6 x 7 0 Weight to 600 lbs. 00 top pivot included 09 intermediate pivot required Bottom pivot mounted to floor USD models listed for use on hour fire doors BHMA/ANSI C076/50A (modified) Extended spindles available L07 / offset -/ lead lined doors For interior doors up to 0 x 0 Weight to 000 lbs. L00 top pivot included L09 intermediate pivot required Bottom pivot mounted to floor USD models listed for use on hour fire doors BHMA/ANSI C076/50A (modified) 07 x / NEW! / offset For interior doors up to 6 For exterior doors up to 0 Weight to 50 lbs. 00 x / top pivot included Bottom pivot mounted to the floor Doors edges must be beveled / in BHMA/ANSI C076/50A (modified) Extended spindles available USD models listed for use on hour fire doors ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS.

5 095 / offset For interior or exterior doors up to 0 x 0 Weight to 50 lbs. 00 top pivot included 09 intermediate pivot required Bottom pivot mortised into side jamb /6 vertical arm adjustment after installation BHMA/ANSI C07/50A (modified) USD models UL listed for use on hour fire doors US C CENTER HUNG PIVOTS Pivot sets include top and bottom pivots. All center hung pivot sets are non-handed and double acting. Intermediate pivots are not used. Center hung pivots are not allowed with labeled doors. Door must be radiused on pivot edge. All sets are available in standard architectural finishes. 07 For interior door up to 6 x 6 Weight to 00 lbs. 00 light duty top pivot included Bottom pivot mortised into side jamb Extended spindles available Can be used with ABH Rescue Stops (See Rescue Hardware Sets) BHMA/ANSI C For interior doors up to 6 x 6 Weight to 50 lbs. 00 light duty top pivot included Bottom pivots mounted to floor Extended spindles available Can be used with ABH Rescue Stops (See Rescue Hardware Sets) BHMA/ANSI C070/50 (modified) 07 Light Duty Pivot for double acting interior doors For doors up to 5 pounds, -/ and -/ thick and up to wide For use in institution, hospitals and nursing homes. For use with ABH rescue stops when emergency hardware is required 0 walking beam style top pivot included Bottom pivot mortised into side jamb and must be floor supported 0 available (floor mounted bottom pivot) Standard bottom pivot can accommodate door undercuts from / to with the addition or removal of /6 thick washers Available in most architectural finishes For interior doors or exterior doors up to 0 x 6 Weight to 500 lbs. 00 top pivot included E00 electrified top pivot available Bottom pivot mounted to floor Extended spindles available BHMA/ANSI C070 ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS.

6 TOP PIVOTS Top pivots are supplied as part of pivot set or can be purchased separately. They are available in most architectural finishes. 00 L00 / offset top pivot Non-handed, full mortise Needle bearing supplied standard. Can be used on heavy duty doors USD models UL listed for use on hour doors US C Top Pivot for -/ lead lined doors / offset Non-handed, full mortise Needle bearing supplied standard USD models UL listed for use on hour doors 00 x / -/ offset top pivot Non-handed, full mortise Needle bearing supplied standard. Can be used on heavy duty doors Extended pivot pins available USD models UL listed for use on hour doors US C NEW! 00 0 Top pivot for center hung doors Walking beam type Light duty Dress plate provided for jamb portion Extended pins available BHMA/ANSI C060/500 Top pivot for center hung doors Walking beam type Light duty Dress plate provided for jamb portion Extended pins available BHMA/ANSI C060/ NEW! Top pivot for center hung doors Walking beam type Standard duty Dress plate provided for jamb portion Extended pins available BHMA/ANSI C060/50 (modified) Electrified Top pivot for center hung doors Walking beam type Standard duty Dress plate provided for jamb portion BHMA/ANSI C060/50 (modified) -ga. wires supplied standard ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS.

7 INTERMEDIATE PIVOTS Intermediate pivots are used to keep doors in alignment. All intermediate pivots are offset hung and cannot be used on center hung doors. Per NFPA 0, fire doors are to have an intermediate pivot for additional 0 or fraction thereof for door heights over 6. Available in most architectural finishes. 09 E09 / offset, handed Full mortise Needle bearing supplied standard Can be used on heavy duty doors USD models listed for use on labeled doors BHMA/ANSI C07/55 Intermediate Pivot For Power Transfer / offset, handed Full Mortise Pivot cannot be separated for installation Can be used on heavy duty doors USD models UL listed for use on labeled doors () ga. wires supplied standard Door and jamb portions are factory assembled 09 x / NEW! -/ offset, handed Full mortise Needle bearing supplied standard can be used on heavy duty doors USD models listed for use on labeled doors BHMA/ANSI C07 L09 Intermediate Pivot For -/ lead lined doors / offset, handed Full mortise Needle bearing supplied standard USD models listed for use on labeled doors BHMA/ANSI C07 ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS. 5

8 SPECIAL PIVOTS For use on pocket door applications. 059 E059 For door weight to 70 lbs., use () 059 For door weight to 60 lbs., use () 059 Non-handed, full mortise Listed for fire doors on hour A label, and 0 minute wood doors Needle bearings supplied standard Available in most architectural finishes including USD 90 degree max. door swing For Power Transfer For door weight to 70 lbs., use () 059 For door weight to 60 lbs., use () 059 Non-handed, full mortise 90 degree max. door swing () ga. wires supplied standard 09 REINFORCING PIVOT Handed (indicate when ordering) Full Surface Reinforcing Pivot for / inset doors hung on -/ pivots with / to centerline of pivot. A solution to the problems of hinge or reinforcement failure resulting in sagging doors, loose screws, pulled out knuckles or split wood. Easy on-site installation for maintenance personnel For use on doors up to 00# Allows for / inset from face of door to face of frame USG Galvanized Finish Supplied with all required fasteners. Security fasteners optional 590 RESCUE STOP For Converting a double acting center hung door to single acting Allows door to swing open in opposite direction if a hospital or nursing home patient falls and obstructs the normal swing of the door Meets ANSI Spec A Stainless steel, USD standard Pushing in on the spring loaded stop allows emergency operation of the door. Stop automatically returns to normal position when released DIRECTION OF NORMAL SWING DOOR RESCUE STOP IN NORMAL POSITION FRAME DIRECTION OF EMERGENCY OPERATION DOOR FRAME RESCUE STOP MAY BE TEMPORARILY DEPRESSED TO ALLOW DOOR TO OPEN IN OPPOSITE DIRECTION COMBO DOUBLE LIPPED STRIKE AND RESCUE STOP CR550/60 CR59/9 For 5-/ and 6-/ frame with -/ door To be used with ABH 07 or 0 center hung pivot sets. Ideal for hospital or nursing home bathroom doors. Stop can be rotated into frame to allow center hung or / inset double acting doors to swing out in case of emergency. Available in USD, US, US, US, US0B. For other finishes, contact factory..09 thick material Meets ANSI A Non-handed For Center Hung Doors For / Inset Door CR550/CR59 5-/ x -/ CR570/CR59 5-/ x -/ CR560/CR59 6-/ x -/ CR50/CR59 6-/ x -/ Custom sizes available Holdback option available (CR550,60,70,0 only) - (handed) CR59/9 CR570/0 6 ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS.

9 SCRM 500 SPECIAL COMBINATION RESCUE STOP FOR MORTISE LOCKS Custom combo double lipped strike and rescue stop for mortise lock SCRM500 Series To be used with ABH 07 or 0 center hung pivot sets. Ideal for hospital or nursing home bathroom doors. Stop can be rotated into frame to allow center hung or / inset double acting doors to swing out in case of emergency. Available in USD, US, US, US, US0B. For other finishes, contact factory..09 thick material Non-handed Holdback option available (handed) Call factory for order form DOUBLE LIPPED STRIKE DS50/0 DS50/0 For 5-/ and 6-/ frame with -/ door To be used with center hung pivot sets. Ideal for hospital or nursing home bathroom doors. Strikes allow center hung or / inset double acting doors to swing in or out without damaging the frame. Available in USD, US, US, US, US0B. For other finishes, contact factory..09 thick material Meets ANSI A For Center Hung Doors / Inset Door DS50 5-/ x -/ DS50 5-/ x -/ DS50 6-/ x -/ DS50 6-/ x -/ Custom sizes available. RESCUE HARDWARE SETS CR550/ CR59/9 Rescue Hardware Sets combine a center hung 07 or 0 pivot set with a double lip combination stop and rescue strike. These units allow doors to open out in case of emergency. This is often required in hospital or institutional settings where private bath doors normally open in. Rescue Strikes for center hung or / inset doors and 5-/ or 6-/ frames are available. ABH models are non-handed for ease of ordering and stocking. Rescue stops and pivots meet BHMA/ANSI A and C070 respectively. Available in most architectural finishes Holdback option available on combination rescue stop (CR550, 60, 70, 0 only) - handed Custom strikes sizes available. Contact factory 0750/9 for Center Hung door with 5-/ frame 0760/9 for Center Hung door with 6-/ frame 0770/9 for / Inset door with 5-/ frame 070/9 for / Inset door with 6-/ frame 050/9 for Center Hung door with 5-/ frame 060/9 for Center Hung door with 6-/ frame 070/9 for / Inset door with 5-/ frame 00/9 for / Inset door with 6-/ frame ABH Manufacturing, Inc ; Fax

10 CONTINUOUS GEAR HINGES HingeKing Continuous Gear Hinges are all heavy duty. All hinges have double the number of bearings of standard duty hinges and are pinless. There are no accessible screws, bolts or pins when the door is closed. HingeKing gear hinges are surface applied to the frame and door. No machining is required. Whether surface mount or concealed, the HingeKing continuous gear hinges eliminate the gap between the door and frame, and provide a weatherproof, tamper-proof barrier. The HingeKing gear hinge is templated and the hole pattern is the same from hinge to hinge. All units (except A0) are UL Listed. Extruded 606-T6 aluminum alloy Polyacetal thrust bearings, 5, 95 and 0 are standard Other sizes available HingeKing continuous gear hinges are offered in 0 minute clear anodized and -step dark bronze anodized HingeKing gear hinges are non-handed unless cut in the field. When field cut, the hinge becomes handed #- x / self-drilling screws standard for concealed hinges. Wood and security screws available. ABH can provide any custom mounting hole location per customer specifications. FULL CONCEALED A0HD /A0LL Concealed For new construction For renovation with new doors and/or frames No mortising of doors or frames required Will cover butt hinge cutouts in old frames Flush Mount, no inset For doors up to 50 lbs. LL for doors up to 000 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes AHD /ALL Concealed / inset For new construction For renovation with new doors and/or frames Will cover butt hinge cutouts in old frames For doors up to 50 lbs. LL for doors up to 000 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A0HD SAFETY HINGE Used without frame stop /6 leaf clearance Concealed For new construction For renovation with new doors and/or frames No mortising of doors or frames required Will cover butt hinge cutouts in old frames /6 inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A0HD /A0LL Concealed For new construction For renovation with new doors and/or frames No mortising of doors or frames required. Will cover butt hinge cutouts in old frames / door inset Door Edge Protector For doors up to 50 lbs. LL for doors up to 000 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A60HD FOR DOORS Concealed For new construction For renovation with new doors and/or frames No mortising of doors or frames required Will cover butt hinge cutouts in old frames Staggered hole pattern / door inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes UL listed for all Models (except 0) for the following rated doors: Swing Type Metal and Wood Doors up to hour without Fire Studs Swing Type Wood Doors up to -/ hour with Fire Studs Swing Type Metal Doors up to -/ hour without Fire Studs Swing Type Metal Doors up to hours with Fire Studs ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS.

11 A70HD/A70LL FOR DOORS Concealed For new construction For renovation with new doors and/or frames No mortising of doors or frames required Will cover butt hinge cutouts in old frames Flush Mount, no inset For doors up to 50 lbs. LL for doors up to 000 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A0HD/A0LL SWING CLEAR Concealed For new construction For renovation with new doors and/or frames No mortising of doors or frames required Will cover butt hinge cutouts in old frames Flush Mount, no inset For doors up to 50 lbs. LL for doors up to 000 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes HALF SURFACE AHD SWING CLEAR Half Surface Frame leaf wrap around for damaged frames For renovation with new doors and/or frames No mortising of doors or frames required Will cover butt hinge cutouts in old frames / inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes AHD For large edge radius or center hung doors or finger guards with long reach For new construction For renovation with new doors and/or frames No mortising of doors or frames required Will cover butt hinge cutouts in old frames / door inset Door Edge Protector For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A50HD Half Surface Frame portion ribbed for proper alignment For new construction For renovation with new doors and/or frames No mortising of doors or frames required Will cover butt hinge cutouts in old frames / door inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A60HD Half surface Frame leaf ribbed for proper alignment -5/6 frame leaf 9/ inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes ABH Manufacturing, Inc ; Fax

12 A50HD Half surface -9/6 frame leaf Permanent replacement for existing frame and new door / inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A50HD Half surface -9/ frame leaf Permanent replacement for existing frame and new door / inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A550HD Half surface For center hung and double egress conversion -9/ frame leaf Permanent replacement for existing frame and new door / inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes FULL SURFACE A0HD SWING CLEAR Full Surface Swings door completely out of door opening Permanent replacement for existing doors and frames For new construction Flush mount, no inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A570HD FOR NARROW FRAMES Full surface 7/ minimum frame Permanent replacement for existing doors and frames /6 inset For doors up to 50 lbs. can be field cut to 79 without cutting thru a bearing or mounting holes A57HD Each unit is true templated For Door and Frame or Bifold applications (indicate on order) 79,, 5, 95 0 standard Custom lengths available Self Drilling Screws Standard Flush Mount, no inset can be cut in the field to 79 without cutting through a hole or bearing For Doors up to 50# 0 ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS.

13 POWER TRANSFER GEAR HINGES All full length full concealed gear hinges (except A0 and A0) can be provided with or ga. concealed power transfer wires. CONCEALED THRU WIRE For all full concealed models (except A0 and A0) TW - () ga. wire - locations TW - () ga. wire - locations TW - () ga. wire - locations TW - () ga. - locations MOVEABLE GEAR HINGE The door and frame leafs are cut to allow access to wires for concealed thru-wires, contacts or monitoring switches without taking hinge off the door and frame Available with () or () ga. wire, or () ga. wire and/or contacts and switches Available for all full length, full concealed hinges (except A0 and A0) Add suffix M REMOVABLE GEAR HINGE Same as Moveable except the entire access portion can be removed completely from the door and frame Available with () or () ga. wire, or () ga. wire and/or contacts and switches Add suffix R REMOVABLE This piece can be mounted at the top or bottom of the door and is used in conjunction with full length hinges less. Available with () or () ga. wire, or () ga. wire and/or contacts and switches For all models of full concealed hinges (except A0 and A0) Contact factory or go on-line for order form AXXXRC - wire, Clear AL AXXXRD - wire, Dk Bronze AXXXRC - wire, Clear AL AXXXRD - wire, Dk Bronze AXXXRC - wire, Clear AL AXXXRD - wire, Dk Bronze HOW TO ORDER ALUMINUM GEAR HINGES Example: A0HDD05 st - th Digit defines series AXXX 5 th & 6 th digits indicates hinge type HD=Heavy Duty, LL= Lead Lined 7 th digit indicates finish C=Clear Aluminum, D=Dark Bronze th - 0 th digits defines lengths 079, 0, 05, 095, 0 th + digits indicates options OPTIONS F - For fire rated doors (Indicate rating) EC - Exposed Electrical Contacts. Indicate number of contacts, handing ES - Exposed Electrical Switch. Indicate handing TW - Concealed Electrical Through Wire. Indicate () ga. wire, () ga. wire, () ga. wire or () ga. wire EM - Concealed Electric Monitoring. Indicate handing WM -Concealed Electric Through Wire and Monitoring. Indicate number of wires and handing PT - Power Transfer - Specify dimension from the top of the hinge to the centerline of the power transfer cut-out and handing M - Moveable R - Removable DD- Dutch Door Contact factory or go on-line for order forms for all electrical and special hinges. ABH Manufacturing, Inc ; Fax

14 STAINLESS STEEL PIN AND BARREL CONTINUOUS HINGES ABH stainless steel hinges are full height piano hinges that provide support for the full height of the door. For doors up to 600 lbs. Self-drilling screws standard, security screws available 0 maximum door width (wood or machine) Hinge leafs are Ga., 0 stainless steel Pin is / diameter 0 stainless steel, barrel. diameter Fire Rating- UL and ULC fire Listed Knuckles are long with Delrin TM bearings between each hours-hollow metal door Hinges -Nominal Sizes 7 (-/ ), (95 ) & 0 (-/ ) 90 min.-hollow metal and composite core wood are non-handed. 6 (7-/ ) & 7 (5 ) are handed fire door Special lengths available 0 min.-wood door Standard finish-usd Custom Cut outs available All dimensions in ( ) are actual hinge lengths. A500 EDGE MOUNT CONCEALED For beveled or square edged doors For -/ doors For high traffic, high abuse doors Heavy-duty Gauge 0 Stainless Steel USD Satin Stainless Steel No exposed fasteners when door is closed Self drilling screws Supports door weights up to 600 lbs. 0 Maximum door width Electrical modifications available UL & ULC fire listed A505 EDGE GUARD Concealed For square edged doors For -/ doors For high traffic, high abuse doors Heavy-Duty Gauge 0 Stainless Steel USD Satin Stainless Steel No exposed fasteners when door is closed Self drilling screws Supports door weights up to 600 lbs. 0 Maximum door width Door edge lip on both faces of door Protects door edge Adjustable to accommodate slight variances in door thickness For specialty door Use with A5CS or A5CB Electrical modifications available UL & ULC fire listed A5 SWING CLEAR WITH EDGE GUARD Concealed Flush mount For square edged doors For -/ doors For high traffic, high abuse doors Heavy-Duty Gauge 0 Stainless Steel USD Satin Stainless Steel Door edge lip on stop side only Self drilling screws Supports door weights up to 600 lbs. 0 Maximum door width No exposed fasteners when door is closed Meets ADA requirements UL & ULC fire listed A55 WITH EDGE GUARD Concealed For square edged doors For -/ doors For high traffic, high abuse doors Heavy-Duty Gauge 0 Stainless Steel USD Satin Stainless Steel Door edge lip on stop side only Self drilling screws Supports door weights up to 600 lbs. 0 Maximum door width No exposed fasteners when door is closed UL & ULC fire listed ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS. MIN. CLEARANCE MIN. CLEARANCE MIN. CLEARANCE 7 5 MIN. CLEARANCE

15 HALF SURFACE A50 SURFACE MOUNTED DOOR LEAF For beveled or square edged doors For -/ doors For high traffic, high abuse doors Heavy-Duty Gauge 0 Stainless Steel USD Satin Stainless Steel Self drilling screws Supports door weights up to 600 lbs. 0 Maximum door width Decorative fastener cover Current transfer prep available (frame leaf only) UL & ULC fire listed A50 SURFACE MOUNTED FRAME LEAF For beveled or square edged doors For -/ doors For high traffic, high abuse doors Heavy-Duty Gauge 0 Stainless Steel USD Satin Stainless Steel Self drilling screws Supports door weights up to 600 lbs. 0 Maximum door width Decorative fastener cover Current transfer prep available (door leaf only) UL & ULC fire listed A506 WITH EDGE GUARD For square edged doors For -/ doors For high traffic, high abuse doors Heavy-Duty Gauge 0 Stainless Steel USD Satin Stainless Steel No exposed fasteners when door is closed Self drilling screws Supports door weights up to 600 lbs. 0 Maximum door width Door edge lip on stop side Protects door edge Decorative fastener cover Current transfer rep available (door leaf only) UL & ULC fire listed FULL SURFACE A50 FULL SURFACE/FLUSH MOUNT For beveled or square edged doors For -/ doors For high traffic, high abuse doors Heavy-Duty Gauge 0 Stainless Steel USD Satin Stainless Steel No exposed fasteners when door is closed Self drilling screws Supports door weights up to 600 lbs. 0 Maximum door width Decorative Fastener Covers UL & ULC fire listed GAUGE STAINLESS STEEL PIN AND BARREL CONTINUOUS HINGES A5500 Full Mortise Edge Mount Used on high-traffic, high-abuse doors Heavy-Duty Gauge 0 Stainless Steel USD Satin Stainless Steel No exposed Fasteners when door is closed Supplied with -x/ Phillips Undercut Flat Head Machine Screw S.S. Supports door weights up to 900 lbs. -0 Maximum door width Nominal Sizes 7, & 0 are non-handed 6 & 7 are handed hinges / diameter stainless steel pin Electrical modifications available UL fire listed NEW! ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS. 7/6 7 5 MIN. CLEARANCE 6 MIN. CLEARANCE 7/6 6 MIN. CLEARANCE 6 MIN. CLEARANCE / 7 6 7/6

16 DOOR EDGE GUARDS Standard lengths 7-/, -/, 5, 96, -/ Special lengths available For bevel edge door (Suffix B) or square edge door (Suffix S) For -/ door Material 6 Gauge, 0 Stainless Steel For high traffic, high abuse doors Standard cutouts available Custom Cut-outs available as required Non-handed (except with cutouts) A5 EDGE GUARD / door edge lip, one side Bevel and square edge available 6 A5B MIN. CLEARANCE 7 MIN. CLEARANCE 6 7 A5S 6 STANDARD CUTOUTS 6 6 A5C EDGE GUARD A5CB A5CS / door edge lip, both sides Bevel and square edge available A5T EDGE GUARD WITH ASTRAGAL / door edge lip, both sides with astragal one side Bevel and square edge available 6 MIN. CLEARANCE MIN. CLEARANCE 6 A5TB MIN. CLEARANCE 7 MIN. CLEARANCE 6 A5TS 6 Latch 6 Mortise -7/ ASA Strike Other cutouts or order forms available online ( or contact factory STAINLESS STEEL POWER TRANSFER HINGES CONCEALED THRU WIRE MOVEABLE For all full concealed models (except A5) TW - () ga. wire location TW - () ga. wire location TW - () ga. wire () - wire locations For all full concealed models add suffix TW, TW or TW Call factory or go on-line for order form Cut to allow access for TW, CT, ES and AMS wiring between hinge and frame or door For all full concealed models (except A5) Add suffix M CONTINUOUS HINGE MODIFICATIONS Special Lengths- Indicate Handing Hospital Tip- Suffix HT Dutch Door Prep- Suffix DD, indicate handing, clearances, door and frame heights Blank- No holes for special applications Standard Edge Guard Cut-out -7/ ASA Strike 6 Latch 6 Mortise Manual Flush Bolt Automatic Flush Bolt Security Stud- Suffix SS, stainless steel studs mounted to frame leaf. Corresponding holes drilled in door leaf. Special prep required for frame and door. Sheared Leaf- Suffix SL for narrow door thickness. Specify distance from pin centerline to heel edge of hinge. Custom Hole Pattern- Suffix CH, any hole dimension or pattern other than ABH standard. Indicate hole size and dimensions. ELECTRICAL MODIFICATIONS Concealed Power Transfer- Suffix TW, TW or TW Power Transfer Contact Switch- Suffix CT- or CT-, for 6 amp surge current, /-0 screws posts to accommodate any gauge wire, no wire furnished. Lead-Lined Cover- Suffix LL for surface mount only. Current Transfer Prep- Suffix PT, indicate position and handing Electric Power Transfer- PT05 (.5 ) or PT0 (0.0 ). Does not include hinge, hinge power transfer prep or Security bracket (PTS). Exposed Monitoring Switch- Suffix ES available in A500, A50, A50, A505 & A55. Adjustable Monitoring Switch- Suffix AMS. Contact factory or go on-line for order forms for electrical modifications or standard/custom cutouts. ABH Manufacturing, Inc ; Fax

17 POWER TRANSFER PT/PTR/PTS05 PT/PTR/PTS0 PT05/PTR05 and PT0/PTR0 provide means for running wires from the frame to the door in a secure and discreet manner. Stainless steel housing and spring conduit. PT05/PTR05 for 05 degree maximum door opening. PT0/PTR0 for 0 degree maximum door opening. PTS05/PTS0 Security Bracket available to prevent tampering when the door is in the closed position. Full mortise. /6 I.D spring conduit Packaged individually with fasteners for wood, steel or aluminum doors and frames. Shipping weight: lb. PTS05 O PTS0 O PT05 O PT0 O PTR05 O PTR0 O COORDINATORS/FLUSH BOLTS & ACCESSORIES 700 COORDINATOR SERIES FOR PAIR OF DOORS - BOTH DOORS SAME SIZE DOOR FRAME MODEL# INCLUDES INCLUDES OPENING COORDINATOR FILLER BAR 5 OR LESS 7 70( ) 70 (0 ) 5-/6 to ( ) 70 ( ) 56-/6 to (5 ) 70 (0 ) 7-/6 to 7 70 (5 ) 70 ( ) -/6 to (5 ) 70 ( ) 96-/6 to (60 ) 70 ( ) Over 0 Contact factory Unequal Pairs 7 70 ( ) 70 (0 ) (6 Active to - Inactive) 700E With lever extension for active door for hold-open pocket frame For use on pair of doors when one door must close before the other Active door lever holds active door open until inactive door closes enough to trip release mechanism then active door closes Safety override allows active door to close first when extreme force applied Filler bar available when coordinator does not fill entire length of opening Mounting brackets available when stop mounted hardware used UL listed for use with pairs of swinging fire doors with astragal US or USP (Matte Black) ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS. 5

18 70 UNIVERSAL COORDINATOR 70 Universal Coordinator is for pairs of doors up to wide. The long arm holds the active door open until the short arm is depressed by the inactive door. When the doors are closed, the arms are hidden by the stop-mounted aluminum case. 760 CARRY BAR For pair of doors, where inactive door can be opened before active door Mounted on inactive door USP standard, plated finishes available 75/75 MOUNTING BRACKETS Patent No. 6,50,0 One size for all pairs of doors up to wide Non-handed Stop mounted Matte black finish (USP) Meets ANSI 56., Type requirements (when used with carry bar) Mounting brackets not required when using stop mounted hardware UL listed for use with pairs of swinging fire doors with astragal Not for use with exposed vertical rod panic devices 5 5 For stop mounted hardware 75 for Stop widths up to -/ 75 for Stop widths over -/ Ready to paint aluminum, plated finishes available GRAVITY COORDINATOR For use on pairs of door to allow inactive door to close before active door UL listed for use with pairs of swinging fire doors with astragal Non-handed Stainless steel Use on pairs of doors with astragal on: - Active door up to - Inactive door over - Both doors over 0 AUTOMATIC FLUSH BOLTS When active door is closed the bolt automatically projects to lock inactive door. Bolt retracts when active door is opened. BHMA. TYPE 5: ANSI 56. UL Listed. 60P PAIRS FOR METAL DOORS Fits ANSI prep for metal doors / throw with vertical adjustment. Adjustment can be made without removing door from frame UL listed hrs on metal door up to wide and high If strike and bolt are misaligned, override prevents damage to door, frame or flush bolt If single unit required, order 60S Dust proof strikes - 70 for floor and/or threshold, 7 for threshold only 60P 6P 6P PAIRS FOR WOOD DOORS / throw with / vertical adjustment. Adjustment can be made without removing door from frame UL listed -/ hrs on wood doors up to wide and high If strike and bolt are misaligned, override prevents damage to door, frame or flush bolt If single unit required, order 6S Dust proof strikes - 70 for floor and/or threshold, 7 for threshold only 6 ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS.

19 MANUAL FLUSH BOLTS Used to lock and unlock an inactive door when the active door is open. When the inactive door is closed, moving the lock lever up locks it and moving the lever down unlocks it. Meets FED SPEC 09 : BHMA L0: ANSI UL Listed. 55S DUST PROOF STRIKES 70 VERTICAL ROD PROTECTOR 57S 7 BOTTOM FIRE BOLT 55S SINGLE UNIT FOR METAL DOORS Non-handed 5/ throw with 7/ vertical adjustment Standard rod length is. Other lengths are available on request If pair is required, order 55P Dust proof strikes - 70 for floor and/or threshold, 7 for threshold only Available in most architectural finishes UL listed for use on metal covered doors up to wide and 0 high 57S SINGLE UNIT FOR WOOD DOORS Same features as 55 with the addition of a special top guide for wood doors If pair is required, order 57P Dust proof strikes - 70 for floor and/or threshold, 7 for threshold only 70 FOR DOORS WITHOUT THRESHOLDS 7 FOR DOORS WITH THRESHOLDS 5 FOR METAL DOORS 59 FOR WOOD DOORS For use with any ABH flush bolts Prevents dirt, dust and debris from clogging floor strikes Eliminates the need for automatic bottom flush bolt and dust proof strike At 0 degrees F. the plug and cover melt, allowing the bolt to project locking the doors together Assist in handicap conformance Use in hospitals, schools, etc. Installs with #6 x / screws directly into the door Installs on any type of wood, metal or plastic door, any thickness. Covers the latching bolt and lower portion of the vertical rod assembly Fire rated Stainless Steel, Satin Finish - for pairs of doors - rod cover standard (custom lengths available) - Right hand single unit - Left hand single unit Latch bolt cover - / projection (-/6 interior clearance) Rod cover - /6 projection ( interior clearance) 0 APPLIED STOP 0 SPECIAL DOOR SILENCER 0 FLOOR STOPS For use with single or double doors without stops Available in all BHMA finishes Supplied with machine & wood screws Diameter and Height as required 0 H0 HD0 EHD0 } rod cover standard (custom lengths available) For metal doors / Projection Grey Available in bags of 00 or bulk pack 0 diameter x -/ high bumper rod 5/ diameter x long H0 diameter x -/ high bumper rod 5/ diameter x long HD0 Bumper diameter x height as required rod -/ diameter x long EHD0 -/ diameter x high bumper rod 5/ diameter x long For use in high abuse areas Ideal for correctional facilities, schools, institutions No exposed fasteners Installed with quick set cement ABH Manufacturing, Inc ; Fax

20 0HO FLOOR STOP & HOLDER Ideal for high abuse installations like schools, heavy doors and correctional facilities. Installed with quick set cement door is hooked to floor portion with a stainless steel hook NEW! 0 PIPE STOP & HOLDER Heavy duty construction for use in schools, institutions and correctional facilities All stainless steel components with rubber bumper The rubber bumper on the door hits the floor portion when used as a stop Door is hooked to floor portion with stainless steel hook when used as holder Floor portion secured in cement Door portion - installed with () # x -/ screws (supplied standard), sex bolts optional Floor portion is solid diameter x long stainless steel rod 05 ALL STAINLESS STEEL SERIES SURFACE BOLTS DL N05 Custom Lengths Available All stainless steel components throw (N5) standard (N5) With bracket for lock - suffix L lock by others N05L Custom Lengths Available Special lengths available on request Sex bolts available Top and bottom strikes available With bracket for lock - suffix L lock by others with double lock bracket Suffix DL Accepts lock (not provided) with / max. diameter shackle and -/ min. shackle opening height. HD05 Heavy duty for extreme conditions Made of all stainless steel, finish USD / wide x / thick bar Unit locks automatically. To release press knob toward door while unlatching. 0 SLIDE BOLT PADLOCK LATCH Custom Lengths Available (HD5TB) and (HD5TB) standard, custom lengths available Sex bolts standard Supplied with top and bottom strikes NEW! Patent Pending T-Strike ASA Strike Ideal for lockers and temporary locking situations Stainless steel assembly Non-handed reversible with built-in fail safe Fits standard 60 or 6 prep in -/ or -/ doors Standard T-strike or ASA strike available For use with / diameter padlock (not provided) Model for -/ backset (6 prep) Model for -/ backset (60 prep) ABH Manufacturing, Inc ; Fax AVAILABLE ON TARGET- QUICKSHIP. SEE INSIDE COVER FOR DETAILS.

21 ROLLER LATCHES ABH Roller Latches are easily adjustable for roller projection for proper contact between roller and frame strike. Adjustment is made with screws on the face of the roller latch body. Maximum roller projection is 5/6. The nylon roller provides durability and quiet operation. All units are stainless steel construction. Meets ANSI/BHMA A56.6, E909. Available in most architectural finishes. Custom strikes available S Cast full lip strike -/6 wide x -/ Latch face x -/ Fasteners Body () #0 x / FH SMS Strike () # x / FH SMS Custom Strike for double acting doors Latch face x -/ Fasteners Body () #0 x / FH SMS Strike # x / FH SMS (Quantity determined by width) Contact Factory for order form 9 9 ASA Strike -/ wide x -/ Latch face x -/ Fasteners Body () #0 x / FH SMS Strike () #- x / FH MS T Strike -/ wide x -/ Latch face x -/ Fasteners Body () #0 x / FH SMS Strike () #0 x / FH SMS 9 9 With integrated angle stop Mounts in header with strike at top of door Cast strike -/ wide x -/ Latch face -/ x -/ Fasteners Body () #0 x / FH SMS Strike () #0 x / FH SMS Extended cast strike -/ wide x -/ Latch face x -/ Fasteners Body () #0 x / FH SMS Strike () # x / FH SMS 95 Roller projection can be adjusted by turning the knurled knob at the back of the latch Maximum roller projection / to compensate for different door clearances Uses standard heavy duty cylindrical lock cut-out Standard strike -/ wide x -/ Body -/ wide x -/ For roller latch with ASA strike order 96 (-/ wide x -7/ ) Fasteners Body () # x / FH SMS Strike () #0 x / FH SMS ASA Strike #- x / FH SMS ABH Manufacturing, Inc ; Fax

22 CROSS-REFERENCE CHART CONCEALED OVERHEAD HOLDERS/STOPS ABH Glynn Rixson Corbin/ Dorma Sargent BHMA Fed. Johnson Russwin Spec. 000 Slim Line Series 00SL Hold-Open 00H 6-x6 N/A N/A N/A C05 00SL Stop 00S 6-x6 N/A N/A N/A C Slim-Line Adjustable 00SA Holder 00HADJ 6ADJ-x6 N/A N/A N/A C SA Stop 00SADJ 6ADJ-x6 N/A N/A N/A C Series 00 Hold-Open N/A -x6 N/A 90H 690H C Stop N/A -x6 N/A 90S 690S C05 00 Friction N/A -x6 N/A 90F N/A C ADJ Series 00ADJ Holder N/A ADJ-x6 N/A N/A N/A C ADJ Stop ADJ-x6 ADJ-x6 N/A N/A N/A C05 00ADJ Friction N/A N/A N/A N/A N/A C Series 00 Hold-Open 0H -x6 N/A 70H 50H C Stop 0S -x6 N/A 70S 50S C05 66A 00 Friction 0F -x6 N/A 70F 50F C05 6 SURFACE MOUNT OVERHEAD HOLDERS/STOPS ABH Glynn Rixson Corbin Dorma Sargent BHMA Fed. Johnson Russwin Spec. 00 Series 0A Hold-Open N/A N/A N/A N/A N/A 0A Stop N/A N/A N/A N/A N/A 0A Friction N/A N/A N/A N/A N/A 00 Series 0 Hold-Open N/A N/A N/A N/A N/A 00 Series 0 Hold-Open 50H 0-x6 DH50S 700H 50H C Stop 50S 0-x6 DH50S 700S 50S C055 66A 0 Friction 50F 0-x6 DH50S 700F 50F C Series 700 Hold-Open 700H -x6 DH5600 N/A N/A C05 GJ Stop 700S -x6 N/A C Series 00 00H -x6 N/A N/A C05 GJ S -x6 9 N/A N/A C05 GJ Series 900 Hold-Open 900H 9-x6 DH50 900H 590H C Stop 900S 9-x6 DH50 900S 590S C05 6A 900 Friction 900F 9-x6 N/A 900F N/A C ADJ Series 900A Hold-Open N/A 9ADJ-x6 N/A N/A N/A 900A Stop N/A 9ADJ-x6 N/A N/A N/A 900A Friction N/A N/A N/A N/A N/A Brand names are trademarks or registered trademarks of their respective companies. 0 ABH Manufacturing, Inc ; Fax It is not assured nor suggested that any two products are exactly the same. The assessment of which products are most similar comes from information provided by trade sources.

23 HOSPITAL PUSH/PULLS ABH G-J ROCKWOOD TRIMCO HAGER CORBIN SARGENT 6000 HL D HL0 /5 6000LB HL6RL - 500RK HL6EO - 56EO PL7, PL HL M PT / MAG HOLDERS ABH RIXSON LCN DORMA SARGENT DOR-O-MATIC 00 FM99 SEM750 EM FM997 SEM70 EM FM996/999 SEM FM990 - EM L FM99 - EM FM FM90 SEM70 EM FM9 - EM COORDINATORS ABH ROCKWOOD IVES TRIMCO HAGER DCI DON-JO COR 09A 97D N COR/5 09B 97D COR60/7 09C 97D L D - NX-6-70 FB - FL F FILLER FB - FL FILLER FL FILLER AB MB M 60AB C MB N 60C CB 090 9C, 97C COR7G - 9D ROLLER LATCHES ABH IVES ROCKWOOD TRIMCO HAGER 90 RL A 90S - 590DA C B D 9 RL BL S RL 59 55B 0R 96 RLA - 55C - Brand names are trademarks or registered trademarks of their respective companies. ABH Manufacturing, Inc ; Fax It is not assured nor suggested that any two products are exactly the same. The assessment of which products are most similar comes from information provided by trade sources.

24 A5500 FM Brand names are trademarks or registered trademarks of their respective companies. abhinfo@abhmfg.com Architectural Builders Hardware Mfg., Inc. Ardmore Ave., Itasca, IL ; FAX 00.9FAXABH (9.9) PIVOT/PIVOT SETS ABH RIXSON IVES DORMA OP / x / 7 x / 7F x / OP5500 L07 L7 70F OPL OPJ / 755J - 0 -/ CP0 00 0/H0 75TOP x / 0 x / /H0 x / 7FTOP 50 L00 L0 77FTOP TOP 06 E00 EH M9/M90 75INT x / M9 x / 7FINT 5 E09 E-M9 75PT 7500 L09 ML9 70FINT F59 905F 7550 E059 EF59 905FPT - STRIKE AND RESCUE STOPS ABH HAGER STANLEY CR550/CR560 55/56 - CR570/CR50 57/5 - DS50/DS50 5/5 DLS- DS50/DS50 5/5 DLS ES- CONTINUOUS GEAR HINGES TYPE ABH ROTON SELECT PEMKO MCKINNEY STANLEY IVES FULL CONCEALED A0 70- SL FMSLF MCK- 66HD FULL CONCEALED A 70- SL FMLI MCK- - - FULL CONCEALED A FMSLISF FULL SURFACE A SL FS MCK- 665HD 0 HALF SURFACE A HALF SURFACE A FULL CONCEALED A0 70- SL FM MCK-5 66HD FULL CONCEALED A60 - SL FULL CONCEALED A SL7 FMSLF FULL CONCEALED A SL HALF SURFACE A HALF SURFACE A HALF SURFACE A SL HALF SURFACE A SL5 HS MCK-5 66HD 05 HALF SURFACE A HSSF FULL SURFACE A SL57 FSCP MCK-5 66HD 57 FULL SURFACE A STAINLESS STEEL HINGES ABH MARKAR HAGER STANLEY IVES A500 FM HD 700 A50 FS 0-657HD 70 A50 HS A50 HM A505 HG HD 705 A506 HG HD - A5 HG - 656HD 7 A55 HG HD 75 A5S EG 0 - EG - A5B EG 0 - EGB - A5CS EG-C-0 - EG - A5CB EG-C-0 - EGB - A5TS EG-T-0 - EG - A5TB EG-T-0 - EGB ABH Mfg., Inc. Printed in USA 9/09 ABH Manufacturing, Inc ; Fax It is not assured nor suggested that any two products are exactly the same. The assessment of which products are most similar comes from information provided by trade sources.