The plastic circular connector with metal locking

Transcription

1 The plastic circular connector with metal locking UTG provides the complete answer to the need for economical lightweight and robust metal coupling Flammability rating UL94-V0 compliant Rapid and secure locking Locks with audible positive «click» Intermateable and interchangeable With UTO, UTP and UTS series Complete range of s Trim Trio s #16 Connection Technologies

2 Layout Shell size Contact # 16 (Ø 1,6) Mixed power / signal versions x #16 (Ø 1,6) x #16 (Ø 1,6) Group C 250V 10-3W3 3 x #16 (Ø 1,6) 3 x #20 (Ø 1,0) x #16 (Ø 1,6) 122G1 3 x #12 (Ø 2,4) x #16 (Ø 1,6) x #12 (Ø 2,4) 4 x #16 (Ø 1,6) x #16 (Ø 1,6) x #16 (Ø 1,6) 18-7 Group C 380V 7 x #16 (Ø 1,6) x #12 (Ø 2,4) 5 x #16 (Ø 1,6) 2

3 Shell size Contact # 16 (Ø 1,6) Mixed power / signal versions x #16 (Ø 1,6) x #16 (Ø 1,6) Group C 660V x #16 (Ø 1,6) x #16 (Ø 1,6) x #8 (Ø 3,6) 2 x #16 (Ø 1,6) Contact identification positions shown are for mating face of pin connectors and wire face of socket connectors x #8 (Ø 3,6) 7 x #16 (Ø 1,6) 3

4 Specifications Shell size Contacts number* Connector type / Part number Cable plug Panel mounting receptacle Male insert Female insert Male insert Female insert 4 #16 UTG6104PN UTG6104SN UTG0104P UTG0104S 2 + ground #16 UTG6103PN UTG6103SN UTG0103P UTG0103S 3 # #16 UTG6103W3PN #16 UTG6128PN UTG6128SN UTG0128P UTG0128S 3 #12 UTG6122G1PN UTG6122G1SN UTG0122G1P UTG0122G1S 12 #16 UTG61412PN UTG61412SN UTG01412P UTG01412S 4# #16 - UTG6148SN UTG0148P #16 UTG61619PN UTG61619SN UTG01619P UTG01619S #16 UTG61823PN UTG61823SN UTG01823P UTG01823S 7 #16 UTG6187PN UTG6187SN UTG0187P UTG0187S 2 # #16 UTG6187PN34 UTG6187SN34 UTG0187P34 UTG0187S34 28 #16 UTG62028PN UTG62028SN UTG02028P UTG02028S 20 #16 UTG62020PN UTG62020SN UTG02020P UTG02020S #16 UTG62235PN UTG62235SN UTG02235P UTG02235S #16 UTG62448PN UTG62448SN UTG02448P UTG02448S 7 #8 + 2 #16 UTG6247PN UTG6247SN UTG0247P UTG0247S 4 #8 + 7 #16 - UTG62411SN UTG02411P - *Contacts supply separately For IP65 waterprotected version (for only receptacle) add «H» behind N or S. Ex. UTG0103PH 4

5 Dimensions B Cable plug - UTG6 Pin ØD ØC B Socket ØA B max Shell size ØA ±0.2 ØC ±0.15 ØD ±0.15 ØE ±0.2 Pin Socket / / / / A max Wall mounting - UTG0 E Pin ØD ØC ØJ ØH Socket B max F ØG Panel cut A max Shell size Pin Socket B ±0.15 C ±0.2 ØD ±0.15 ØE ±0.2 F ±0.25 ØG ±0.1 ØH ±0.1 ØJ ± / / / / Note: all dimensions are in mm 5

6 Specifications Shell size 10 Contacts number* Connector type / Part number Free hanging receptacle Male insert Female insert 4 #16 UTG1104P UTG1104S 2 + ground #16 UTG1103P UTG1103S 3 # #16 - UTG1103W3S 12 8 #16 UTG1128P UTG1128S #16 UTG11412P UTG11412S #16 UTG11619P UTG11619S #16 UTG11823P UTG11823S #16 UTG12028P UTG12028S 20 #16 UTG12020P UTG12020S #16 UTG12235P UTG12235S 24 *Contacts supply separately For IP65 waterprotected version (for only receptacle) add «H» behind N or S. Ex. UTG1103PH 48 #16 UTG12448P UTG12448S 7 #8 + 2 #16 UTG1247P UTG1247S 6

7 Dimensions B Free hanging - UTG1 Pin ØD Socket B ØA B max Shell size ØA ±0.2 Pin Socket ØD ± / / / /

8 Accessories Cable clamp Cable clamp for waterprotected (IP65) application Cable gland for waterprotected (IP65) application Part number Shell size UTG10AC 10 UTG12AC 12 UTG14AC 14 UTG16AC 16 UTG18AC 18 UTG20AC 20 UTG22AC 22 UTG24AC 24 Part number Shell size UTG10PG 10 UTG12PG 12 UTG14PG 14 UTG16PG 16 UTG18PG 18 UTG20PG 20 UTG22PG 22 UTG24PG 24 Part number Shell size UTG10ST 10 UTG12ST 12 UTG14ST 14 UTG16ST 16 UTG18ST 18 UTG20ST 20 UTG22ST 22 UTG24ST 24 Metal shrink boot Dustcap with chain (plug) Dustcap with chain (receptacle) Part number Shell size UTG10AD 10 UTG12AD 12 UTG14AD 14 UTG16AD 16 UTG18AD 18 UTG20AD 20 UTG22AD 22 UTG24AD 24 Part number Shell size UTG610DCG 10 UTG612DCG 12 UTG614DCG 14 UTG616DCG 16 UTG618DCG 18 UTG620DCG 20 UTG622DCG 22 UTG624DCG 24 Part number Shell size UTO10DCG 10 UTO12DCG 12 UTO14DCG 14 UTO16DCG 16 UTO18DCG 18 UTO20DCG 20 UTO22DCG 22 UTO24DCG 24 8

9 Plastic protective cap for receptacle Gasket Part number Shell size A A A A A A A A 24 Part number Shell size UTFD12B 10 UTFD13B 12 UTFD14B 14 UTFD15B 16 UTFD16B 18 UTFD17B 20 UTFD18B 22 UTFD19B 24 9

10 Tooling Standard s Contact size Part number Head Handles RM/RC 24W3 - RM/RC 20W3 - S20RCM RM/RC 18W3 - SM 24W3S- (1) SC 24W3S- (1) #20 1mm #16 1.6mm SM 24WL3S- (2) SC 24WL3S- (2) SM/SC 20W3S- (1) SM/SC 20WL3S- (2) RM/RC 28M1- RM/RC 24M9- RM/RC 20M13- RM/RC 20M12- RM/RC 16M23- RM/RC 14M30- SM/SC 24M1- SM/SC 24ML1- SM/SC 20M1- SM/SC 20ML1- SM/SC 16M1- SM/SC 16ML1- SM/SC 14M1- SM/SC 14ML1- SM/SC 16M11- SM/SC 16ML11- (1) reeled (2) loose Note: endurance of SHANDLES tool = cycles. S20SCM20 S16RCM20 S16RCM16 S16RCM14 S16SCM20 S16SCML1 S16SCML11 SHANDLES SHANDLES Contact size #12 2.4mm #8 3.6mm Extraction tools Specific s Contact size #16 Ø 1.6mm Longer RM #16 Ø 1.6mm Shorter RC Part number Hand tools (SHANDLES) head S16RCM20 Tool with separate locator Hand tool Positioner + locator setting Part number Tool with separate locator Hand tool Positioner + locator setting N- / N- / N- / M317 VGE10077A N- / N- / N- / A / A A / A A / A M317 VGE10078A A / A A / A 6/7 RM28M1GE1- RM24M9GE1- RM20M13GE1- RM16M23 GE1- S16RCM16 MH860 MH /8 RM14M30 GE1- S16RCM14 RC28M1GE7-4/6 RC24M9GE7- S16RCM20 5/6 RC20M13GE7- MH860 MH86164G RC20M12GE7-5/7 RC16M23GE7- S16RCM16 6/8 RC14M30GE7- S16RCM14 Extraction tools RX2025GE1 Coaxial s See pages 17 10

11 Crimping One of the key factors which affects the performance of a connector, is the way s are terminated. Crimped connections are nowadays seen as the best solution to ensure quality throughout the lifetime of the product. Here are some reasons why we recommend this method of termination for UTG connectors: Advantages (Extract from the IEC ): - Effi cient processing of connections at each production level - Processing by fully-automatic or semi- automatic crimping machines, or with hand operated tools - No cold-soldered joints - No degradation of the spring characteristic of female s by the soldering temperature - No health risk from heavy metal and fl ux steam - Preservation of conductor fl exibility behind the crimped connection - No burnt, discolored and overheated wire insulation - Good connections with reproducible electrical and mechanical performances - Easy production control. To ensure that the crimp tooling is performing according tooriginal specifi cations, it is important to carry out regular checks. A common way to check the performance of tooling is with a simple pull test, ideally using a dedicated electric pull tester. Minimum recommended full forces are indicated in the tables below: Machined W H W H Stamped & Formed Active part Machined s size 20 S & F s size 20 Machined s size 16 S & F s size 16 Contact type Die location on heads Wire section range Section (mm²) Tensile straight test (mini) Height (Mm) H (±0.075) Width (Mm) W (±0.075) RM/RC 24W3* 26/24 AWG min 15 N AWG max 32 N RM/RC 20W3* 22/20 AWG min 40 N AWG max 60 N RM/RC 18W3* 20/18 AWG max 60 N AWG max 90 N SM/SC 24WL3TK6* 26/24 AWG min 15 N AWG max 32 N SM/SC 20WL3TK6* 22/20 AWG min 40 N AWG max 60 N RM/RC 28M1K* 30/28 AWG min 11 N AWG max 11 N RM/RC 24M9K* 26/24 AWG min 15 N AWG max 32 N AWG min 40 N RM/RC 20M13K* AWG max 60 N 22/20 AWG min 40 N RM/RC 20M12K* AWG max 60 N AWG max 60 N RM/RC 16M23K* 18 AWG max 90 N AWG max 150 N RM/RC 14M30K* 16 AWG min 150 N AWG min 230 N SM/SC 24ML1TK6* 26/24 AWG min 15 N AWG max 32 N SM/SC 20ML1TK6* 22/20 AWG min 40 N AWG max 60 N SM/SC 18 AWG min 90 N ML11TK6* 16 AWG max 150 N SM/SC 16ML1TK6* 18 AWG min 90 N AWG max 150 N SM/SC14ML1TK6* 14 AWG max 230 N Head's P/N S20RCM S20SCM20 S16RCM20 S16RCM16 S16RCM14 S16SCM20 S16SCML11 S16SCML1 (1): example of plating, for other plating see page 13 11

12 Contacts Description The UTG series is delivered without (crimp version). When s are not loaded, this series offers the unique possibility to use the same in any layout as long as it receives the same active part size. Thus it is possible to buy only one reference and equip all connectors even if housings are different. The main benefit is the standardisation which means reduction of inventory cost. Bearing in mind that any additional tool or complicated assembly process should be avoided, our s are based on a snap-in principle which avoid the use of an insertion tool. Crimp s are available in different versions: machined stamped & formed coaxial fiber optic 12

13 Contact plating selector guide As soon as you know what size you need, you next have to decide on which type to use. Souriau proposes mainly two different types of electrical s: - Machined - Stamped & formed Machined s are generally chosen for low quantities purpose as well as a better solution for power applications. Stamped & formed s offer the ability to be crimped automatically which makes them more suitable for high volume production applications. Then comes the question: What plating should I choose? Hereunder is a graph with criteria to guide you: NB: do not mix different plating (e.g. tin plated pin with gold plated socket ). Vibration Number of cycles 250 Gold flash µm of gold min Silver Tin 5mA 5mV Current / Voltage Contact size #20 #12 #16 #8 13

14 Contact selector guide Contact preloaded Electrical characteristics: resistance Available platings ( preloaded) #20 Ø1mm Machined < 4m Min 0.4µ gold over 2µ Ni #16 Ø1.6mm Machined < 3m Contact supply separately Electrical characteristics: resistance Available platings ( supply separately) #20 Ø1mm Machined Stamped & formed < 6m < 15m A J 2µ Ni + 2µ Ag Gold fl ash over 2µ Ni #16 Ø1.6mm #12 Ø2.4mm #8 Ø3.6mm Machined Stamped & formed Machined Machined < 3m < 6m < 5m < 5m K S31 S18 S25 S26 Min 0.4µ gold over 2µ Ni Active part: Gold flash over Ni Crimp area: Nickel Active part: 0.75µ gold min over 2µ Ni Crimp area: 1.3µ tin over Ni Other: Nickel Active part: 0.75µ Au over Ni Crimp area: flash Au over Ni TK6 2-5µ Sn pre-plated Other platings on request ( supply separately) T D28 T: 2µm Ni mini all over + 3 to 5 µm Sn all over 0.75µ gold over Ni Packaging Conscious of the wide variety of applications, packaging has been considered for small series (bulk packaging) and high volume production (reeled s): Size s #20 & #16 25 pieces bulk packing (stamped & formed s) 50 pieces bulk packing (machined s) 1000 pieces bulk packing (machined s) 3000 pieces reeled (stamped & formed s) 5000 pieces reeled (machined s) Size s #12 & #8 100 pieces bulk packing (stamped & formed s) 14

15 Crimp s Standard version Contact size #20 Ø1 mm #16 Ø1.6 mm #12 Ø2.4 mm #8 Ø3.6 mm Type (1) reeled (2) loose Exemple: RM24W3K - Size #20, Machined, AWG24 wire. Wire size Part number Max AWG mm² Male Female wire Ø Max insulator Ø Machined RM24W3K RC24W3K 1.58 max K Stamped & Formed SM24WL3- (2) SC24WL3- (2) Plating available TK6 S25 (female) S26 (male) Machined RM20W3K RC20W3K 1.58 max K Stamped & Formed SM20WL3- (2) SC20WL3- (2) TK6 S25 (female) S26 (male) Machined RM18W3K RC18W3K 2.10 max K Machined RM28M1- RC28M K, J Machined RM24M9- RC24M K, J Stamped & SM24M SC24M1- (1) Insulation Formed SM24ML1- (2) SC24ML1- (2) grip S31, S18, TK6 Machined RM20M13- RC20M RM20M12- RC20M K, J Stamped & SM20M SC20M1- (1) Insulation Formed SM20ML1- (2) SC20ML1- (2) grip S31, S18, TK6 Machined RM16M23- RC16M K, J Stamped & SM16M SC16M1- (1) No insulation Formed SM16ML1- (2) SC16ML1- (2) 3.0 grip S31, S18, TK6 Stamped & SM16M SC16M11- (1) Insulation Formed SM16ML11- (2) SC16ML11- (2) grip S31, S18, TK6 Machined RM14M50- RC14M K, J Machined RM14M30- RC14M K, J Stamped & SM14M SC14M1- (1) No insulation Formed SM14ML1- (2) SC14ML1- (2) 3.2 grip S31, S18, TK NA A NA A Machined NA A NA A A, K NA A NA A A A A A Machined A A A A A A A 15

16 Crimp s First Mate Last Break s Contact size #16 Ø1.6 mm Longer male (+1mm) #16 Ø1.6 mm Shorter female (-0.7mm) Type Machined Machined Color band Wire size Part number Max wire Ø Max insulator Ø AWG mm² Male Female Front Rear RM28M1GE RM20M13GE1 1.8 Black Red 1.18 RM20M12GE1-2.2 Blue Red RM16M23GE Red RM14M50GE Red RM14M30GE Red Exemple: RM16M3GE1K - Size #16, Machined, Longer male, AWG16 wire Red RM24M9GE Red Red RC28M1GE Blue RC24M9GE Red Blue RC20M13GE7 1.8 Black Blue RC20M12GE7 2.2 Blue Blue RC16M23GE Blue RC14M50GE Blue RC14M30GE Blue Plating available = K or J = K or J How to make FMLB / LMFB connection Contact 2 Contact 1 Standard male Standard female Shorter female Standard male LMFB Standard female Longer male FMLB First Mate Last Break s should be chosen only if the cavity is not marked with the earth symbol. For cavities marked with the earth symbol, standard s will fulfi ll the same role as a fi rst mate, last break used in a standard cavity. Ground symbol 16

17 #16 coaxial s Coaxial range We provide 2 types of coaxial s suitable for 50 or 75, coaxial cable or twisted pair cable. Monocrimp coaxial The monocrimp one-piece coaxial s offer high reliability plus the economic advantage of a 95% reduction in installation time over conventional assembly methods. This economy is achieved by simultaneously crimping both the inner conductor and outer braid or drain wire. Multipiece crimp coaxial The inner conductor and outer braid is crimped individually. The thermoplastic insulating bushing in the outer body is designed to accept and permanently retain the inner. An outer ferrule is used to connect the braid to the outer and provide cable support to ensure against bending and vibration. Suitable for Coaxial cable or Twisted cable For jacket diameter from 1.78 to 3.05mm Inner conductor up to 2.44mm diameter For jacket diameter from 0.64 to 1.45mm Inner conductor from AWG30 to AWG24 Contacts for coaxial cable summary Contact type Male Contact range Female Contact part number with cable combination Cabling notice Multipiece RMDXK10D28 RCDXK1D28 See pages 25 & 26 See page 21 Monocrimp RMDX60xxD28 RCDX60xxD28 See page 27 Contacts for twisted pairs cable summary Contact type Contact range Contact part number with Male Female cable combination Cabling notice Multipiece RMDXK10D28 RCDXK1D28 + YORK090 + YORK090 See page 22 See page 23 Monocrimp RMDX60xxD28 RCDX60xxD28 See page 24 17

18 PCB s PCB s PCB soldering UTG range can be carried out with a wave soldering process, but not refl ow soldering process. All high temperature processes are prohibited. Contact size #20 Ø1mm Part number Type Male Female Short version RMW50A7K RCW50A7K Long version RMW5016K RCW5016K Plating K #16 Ø1.6mm Exemple: RM50A7K - Size #20, Short version, male. Short version RM20M12E8K RC20M12E8K Long version RM20M12E83K RC20M12E83K RC20M12E84K K Nominal length (G) Dimension of dipsolder s out of connector (s to be ordered separately). G UTG0 Connector size Pin Socket RM20M12E8* RM20M12E83* RC20M12E8* RC20M12E83* RC20M12E84* * Plating indication: see plating table 18

19 Fibre optic s Description Size 16 Fibre optic s for TRIM TRIO connectors Size 16 Fibre optic s are optical s designed for the integration of optical links in all TRIM TRIO cable connectors. The Fibre optic s are designed to accommodate: Plastic Optical Fibre (POF) 1 mm core and 2.2 mm jacket Plastic Clad Fibre (PCF) 230µm core and 2.2 mm jacket Typical features and benefits are: Socket is spring loaded to avoid any air gap between the two optical faces. Low insertion loss is provided by high precision pieces. Single jumpers, multiway harness and active device housings can be supplied regarding customer requirement. Technical characteristics Performance Fibre type:...pof Wave length: nm Optical insertion loss (typ.):...2 db max. Jacketed external diameter:...2.2mm Temperature range: C to +70 C Cable retention:... 49N Mating cycles without cleaning:...50 Max. mating cycles: Construction Contact body: Copper alloy Connector accommodation Any TRIM TRIO size 16 can be used in any position in any connector in the TRIM TRIO size 16 interconnection system : UTP, UTS, UTG, UTO. 19

20 Fibre optic s Ordering information POF Contacts (Plastic Optical Fibre) Male... RMPOF1000 Female...RCPOF1000B POF Contact (Plastic Optical Fibre) STANDARD TOOLING KIT - P/N 80MS0004 The standard tooling kit is made of the part numbers below that can be ordered separately as well. SPECIFIC TOOLING LIST - can be ordered only separately Part numbers Descriptions Part numbers Descriptions 80WD0005 Stripping tool 80WG0010 Needle 80WD WM WP WP WP WP0018 Automatic stripping tool for Ø 0.5 mm, 0.6 mm, 0.7 mm & 3.8 mm Ruler Polishing plate Non slip base (to hold the polishing plate) Polishing disk (grain size 9µm) Polishing tool 80WG WG WN WN WN WN0008 Capsule Syringe Dry air spray Optical paper Dropping bottle Wiping solvent 80WP0019 Polishing disk (grain size 30µm) 80WS0002 Crimping plier 20

21 #16 coaxial s Coaxial cable - Contact monocrimp and multipiece Cable type Impedance RG161/U 75 Contact type Ø over jacket Ø over dielectric Inner cond size inch mm inch mm Ext. Ø mm Ø outer braid RG179A/U max RG179B/U max inch mm Male kit for coaxial cable Female kit for coaxial cable RG187/U max RG188/U 50 Multi piece max max RMDXK10D28 RCDXK1D28 RG174/U max AMPHENOL RG196/U max RG178A/U max RG/188A/U max RMDX6036D28 RCDX6036D28 KX21TVT (europe) RG178 B/U max RMDX6034D28 RCDX6034D28 RG178 / BU max RMDX6050D28 RCDX6016D28 RG174/U 50 Mono max RMDX6032D28 RCDX6032D28 crimp RG188A/U max RMDX6036D28 RCDX6036D28 RG316/U max RMDX6036D28 RCDX6036D28 raychem 5024A RMDX6052D28 RCDX6052D28 raychem 5026e RMDX6036D28 RCDX6036D28 surprenant pn PRD PN 247AS- C Multi piece RMDXK10D28 RCDXK1D RMDX6018D28 RCDX6018D28 PRD PN 247AS-C RMDX6018D28 RCDX6018D28 JUDD C RMDX6036D28 RCDX6036D28 CDC PIN RMDX6046D28 RCDX6016D28 CDC PIN RMDX6050D28 RCDX6016D28 CDC PIN RMDX6050D28 RCDX6016D28 ampex - Mono RMDX6032D28 RCDX6032D28 TI PN crimp RMDX6024D28 RCDX6024D28 Honeywell PN solid RMDX6026D28 RCDX6026D RMDX6050D RMDX6050D RMDX6032D28 RCDX6032D RMDX6024D28 RCDX6024D RMDX6026D28 RCDX6026D28 21

22 #16 coaxial s Twisted cable - Contact monocrimp and multipiece Cable type Contact type Inner AWG cond Ø over jacket (single wire) Inner cond size inch mm Stranded definition Ext. Ø mm inch Ø outer braid mm Male kit for coaxial cable Female kit for coaxial cable 2#24 stranded mil w type B #24 solid mil-w-76 type LW #26 stranded mil w 76 type LW or mil w16878 type b&e Multi piece 2 #28 solid mil-w-81822/ TWISTED PAIR 1/.201 SOLID MIL w 76 TYPE lw or MIL W twisted pair solid mil w 81822/ #28 7/.0036 per Hitachi spec ec-711 ( ) 1.24 max 1.12 max 1.09 max 0.71 max 1.12 max 0.71 max Mono #24 7/ / crimp 7/ RMDXK10D28 RCDXK1D28 1/ RMDXK10D28 RCDXK1D28 7/ RMDXK10D28 RCDXK1D RMDXK10D28 RCDXK1D28 1/ RMDXK10D28 RCDXK1D28 1/ RMDXK10D28 RCDXK1D / #30 solid #26 7/ / #26 19/ / RMDX6031D28 + YORX090 RMDX6031D28 + YORX090 RMDX6015D28 + YORX090 RMDX6031D28 + YORX090 RMDX6019D28 + YORX090 RMDX6019D28 + YORX090 RMDX6019D28 + #24 19/ / YORX x0.1 RMDX6019D28 + YORX x0.2 RMDX6019D28 + YORX x0.13 RMDX6019D28 + YORX x0.16 RMDX6031D28 + YORX090 RCDX6031D28 + YORX090 RCDX6031D28 + YORX090 RCDX6015D28 + YORX090 RCDX6031D28 + YORX090 RCDX6019D28 + YORX090 RCDX6019D28 + YORX090 RCDX6019D28 + YORX090 RCDX6019D28 + YORX090 RCDX6019D28 + YORX090 RCDX6019D28 + YORX090 RCDX6031D28 + YORX090 22

23 Twisted pair cable multipiece cabling Cable reference 2#24 stranded mil w type B 2 #24 solid mil-w-76 type LW 2 #26 stranded mil w 76 type LW or mil w16878 type B & E 2 #28 solid mil-w-81822/3 twisted pair 1/.201 solid mil w 76 type LW or mil w twisted pair solid mil w 81822/3 Contact type Multi piece Male Female Crimp tool Die set Stop bushing Cable strip length Inner conductor crimp Braid crimp A B C g dim t dim g dim t dim RMDXK10D28 RCDXK1D28 M10S1J - - See assembly notice Female Strip lengths of cable 6.35 ±0.41 Outer hyring YOC074 Twisted pair adapter YORK-090 Inner supporting sleeve RCDXB Inner pin RMD26L-1 Outer female RCDX ±0.41 Conductor "W" ±0.41 Conductor "X" Step 1: Step 2: Step 3: Twisted pair adapter Male Outer hyring Supporting sleeve Outer male RMDX60-2 Inner socket RFD26L-1 Inner supporting sleeve RMDXB Twisted pair adapter YORK-090 Outer hyring YOC074 Conductor "Y" 7.95 ±0.41 Strip lengths of cable Conductor "Z" 7.95 ± ±0.41 Step 1: Step 2: Step 3: Twisted pair adapter Locking louver typical ±0.41 Inner supporting sleeve Outer hyring Grounding louver typical 0.25 ± ±0.41 When using solid wire fl atten conductor "X" and "Z" using N24FL-1 die as shown 7.95 ± ±0.41 Note : all dimensions are in mm 23

24 #16 coaxial s Twisted pair cable monocrimp cabling Cable reference Contact type Male Female Crimp tool Die set Stop bushing Cable strip length #28 7/.0036 per Hitachi spec ec-711 ( ) S80 SL S80 SL #30 solid S83 SL #26 7/.0063 S80 SL #26 19/.004 Mono RMDX6031D28 RCDX6031D28 M10S1J crimp + YORX090 + YORX090 M10SG8 ASSY'Y #24 7/.008 TOOL DIE SET STOP BUSHING M10S1J TOOL #24 19/ AWG26 (19x0.1) M10SG8 AWG24 (7x0.2) crimping kit AWG24 (19x0.13) AWG26 (7x0.16) S80 SL150 Inner conductor crimp Braid crimp A B C g dim t dim g dim t dim 1.30 to to to to to to to to to to to to to to to to to to to to to to to to to to to to 2.97 Select appropriate monocrimp coax twisted pair and cable combination. Select appropriate crimp tooling (hand tool, S-die set, stop bushing). Strip the twisted pair cable to the designated wire strip lengths. Insert the stripped cable into the. One cable is to be inserted into the inside diameter of hyring, and pushed forwaerd into the inner. The second cable is to be inserted between the outside diameter of hyring and the inside diameter of the outer body. Crimp the. See cable strip lengths Cable strip length B C RCDX60 Female coax RMDX60 Male coax A 16 min. G G Braid crimp (G) to be measured with die set fully closed Inner conductor crimp (G) to be measured with die set fully closed Note : all dimensions are in mm 24

25 Multipiece male with coax cable Cable reference Contact Hyring complementary compoments Outer crimp tool Crimp tool M10S1J Inner crimp tool Crimp tool M10S1J Die set Stop bushing Die set Stop bushing Cable strip length A B C RG161U RG179 S23D RG187U YOC RG188/U S26D2 RG174/U Male: RG178A/U YOC074 + S221 SL471 SL46D RMDXK10D28 S23D2 RG196U RMDXB AMPHENOL YOC074 surprenant pn 8134 Multipiece kit details Cable stip length RMDX602D28 Outer RMDXK10D28 includes RFD26L1D28 YOC074 RMDXB0553 Inner Outer hyring Inner supporting sleeve Dielectric diameter A B C Contact assembly with dielectric diameter over 1.4mm - without inner supporting sleeve Outer male RMDX60-2 Inner socket RFD26L-1 Outer hyring YOC ± ± ±0.41 Strip lengths of cable Step 1: - Assemble outer hyring onto cable - Assemble inner socket to inner conductor and crimp Step 2: - Insert the assembly into the outer male until the inner socket snaps into place - The cable braid (shield) should now cover the barrel of the outer male as shown Step 3: - Slide outer hyring forward against spring and crimp in place as shown Locking louver typical Grounding louver typical Contact assembly with dielectric diameter under 1.4mm - with inner supporting sleeve Outer male RMDX60-2 Inner socket RFD26L-1 Inner supporting sleeve RMDXB Outer hyring YOC ± ± ±0.41 Strip lengths of cable Step 1: - Assemble outer hyring onto cable - Assemble supporting sleeve over dielectric and under braid - Assemble inner socket to inner conductor, push back against sleeve and crimp Step 2: - Insert the assembly into the outer male until the inner socket snaps into place - The cable braid (shield) should now cover the barrel of the outer male as shown Step 3: - Slide outer hyring forward against spring and crimp in place as shown Locking louver typical Note : all dimensions are in mm Supporting sleeve Outer hyring Grounding louver typical 25

26 #16 coaxial s Multipiece female with coax cable Cable reference Contact Hyring complementary compoments Outer crimp tool Crimp tool M10S1J Inner crimp tool Crimp tool M10S1J Die set Stop bushing Die set Stop bushing Cable strip length A B C RG161U RG179 S23D RG187U YOC RG188/U S26D2 RG174/U Female: RG178A/U YOC074 + S221 SL471 SL46D RCDXK1D28 S23D2 RG196U RMDXB AMPHENOL surprenant pn 8134 YOC Multipiece kit details Cable stip length RCDX602D28 Outer RCDXK1D28 includes RMD26L1D28 YOC074 RCDXB0553 Inner Outer hyring Inner supporting sleeve Dielectric diameter A B C Contact assembly with dielectric diameter over 1.4mm - without inner supporting sleeve Strip lengths of cable ± ±0.41 Outer hyring YOC074 Inner pin RMD26L-1 Outer female RCDX60-2 Step 1: - Assemble outer hyring onto cable - Assemble inner pin to inner conductor and crimp Step 2: - Insert the assembly into the outer female until the inner pin snaps into place - The cable braid (shield) should now cover the barrel of the outer female as shown Step 3: - Slide outer hyring forward against spring and crimp in place as shown Contact assembly with dielectric diameter under 1.4mm - with inner supporting sleeve Strip lengths of cable ± ±0.41 Outer hyring YOC074 Supporting sleeve RCDXB Inner pin RMD26L-1 Outer female RCDX Step 1: - Assemble outer hyring onto cable - Assemble supporting sleeve over dielectric and under braid - Assemble inner pin to inner conductor, push back against sleeve and crimp Step 2: - Insert the assembly into the outer female until the inner pin snaps into place - The cable braid (shield) should now cover the barrel of the outer female as shown Step 3: - Slide outer hyring forward against spring and crimp in place as shown Outer hyring Supporting sleeve Note : all dimensions are in mm 26

27 Coax cable with monocrimp cabling Cable reference Male Female Crimp tool Die set Stop bushing Inner conductor Cable strip length Braid crimp crimp A B C g dim t dim g dim t dim CDC PIN RMDX6046D28 RCDX6016D28 S80 SL / / / /2.84 CDC PIN RMDX6046D28 RCDX6016D28 S87 SL / / / /2.84 CDC PIN RMDX6050D28 RCDX6016D28 S80 SL / / / /2.95 KX21TVT (europe) RG178 B/U RMDX6034D28 RCDX6034D28 S82 SL / / / /2.9 RG178 / BU RMDX6050D28 RCDX6016D28 S87 SL / / / /2.84 ampex RMDX6032D28 RCDX6032D28 S80 SL / / / /2.95 TI PN RMDX6024D28 RCDX6024D28 S82 SL / / / /2.9 RG174/U RMDX6032D28 RCDX6032D28 S80 SL / / / /2.95 Honeywell PN RMDX6026D28 RCDX6026D28 S82 SL / / / /2.9 RG188A/U RMDX6036D28 RCDX6036D28 S80 SL / / / /2.95 RG316/U RMDX6036D28 RCDX6036D28 S80 SL / / / /2.95 PRD PN M10SG8 ASSY'Y RMDX6018D28 RCDX6018D28 247AS-C TOOL DIE SET / / / /2.97 PRD PN 247AS-C1251 RMDX6018D28 RCDX6018D28 M10S1J STOP BUSHING M10S1J TOOL / / / /2.97 raychem 5024A3111 RMDX6052D28 RCDX6052D28 S88 SL / / /2.79 raychem 5026e1614 RMDX6036D28 RCDX6036D28 M10SG8 ASSY'Y / / / /2.97 JUDD C RMDX6036D28 RCDX6036D28 TOOL DIE SET STOP BUSHING M10S1J TOOL / / / /2.97 inner cond. #30, braid diam 2.64 RMDX6050D28 - S80 SL inner cond. #30, braid diam 2.29 RMDX6050D28 - S87 SL inner cond. #28, braid diam 2.9 RMDX6032D28 RCDX6032D28 S80 SL inner cond. #26, braid diam 1.78 RMDX6024D28 RCDX6024D28 S82 SL inner cond. #26, braid diam 3.05 RMDX6026D28 RCDX6026D28 S82 SL Select appropriate cable and combination. Select appropriate crimp tooling (hand tool, S-die set, stop bushing). Strip coax cable to the designated wire strip lengths. Insert the stripped coax into the rear of the. Crimp the. See cable strip lengths Cable strip length RMDX60 Male coax A B C RCDX60 Female coax Note : all dimensions are in mm 27

28 Glossary of terms Clearance Per the IEC it is the shortest distance between two conductive parts even over the air. Creepage distance Per the IEC it represents the shortest distance along the surface of the insulating material between two conductive parts. Air gap Creepage distance Working voltage Per the IEC it is the highest r.m.s. value of A.C. or D.C. voltage across any particular insulation which can occur when the equipment is supplied at rated voltage. Rated impulse voltage Impulse withstands voltage value assigned by the manufacturer to the equipment or to a part of it characterizing the specifi ed withstand capability of its insulation against transient overvoltage. Working current It is the maximum continuous and not interrupted current able to be carried by all s without exceeding the maximum temperature of the insulating material. CTI (Comparative Tracking Index) The CTI value is commonly used to characterize the electrical breakdown properties of an insulating material. It allows users to know the tendency to create creepage paths. This value represents the maximum voltage after 50 drops of ammonium chloride solution without any breakdown. RTI (Relative temperature Index): Extract from ULs website: Maximum service temperature for a material, where a class of critical property will not be unacceptably compromised through chemical thermal degradation, over the reasonable life of an electrical product, relative to a reference material having a confi rmed, acceptable corresponding performance defi ned RTI. - RTI Elec: Electrical RTI, associated with critical electrical insulating properties. - RTI Mech Imp: Mechanical Impact RTI, associated with critical impact resistance, resilience and fl exibility properties. - RTI Mech Str: Mechanical Strength (Mechanical without Impact) RTI, associated with critical mechanical strength where impact resistance, resilience and fl exibility are not essential Transient voltage Extract from the IEC : Short duration overvoltage of a few millisecond or less, oscillatory or non-oscillatory, usually highly damped. 28

29 29

30 30

31 31

32 Stage - Light Industry Building automation & control Off road - Mining Railway industry@souriau.com Connection Technologies 32 Medical WINDUTGO02EN Copyright SOURIAU All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notifi cation or public announcement. Any duplication is prohibited, unless approved in writing.