General Hand Tool Types Certicrimp II SAHT. Certi-crimp SAHT. Certi-crimp SAHT (U Head) Features: Features: Features:
|
|
|
- Clarence Patrick
- 5 years ago
- Views:
Transcription
1 Certicrimp II SAHT Standard Straight Action Hand Tool Design Widely used in the Aircraft and Military industries Terminal loactor / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.59 kg (1.3 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system & Battery Tool Certi-crimp SAHT Design now superseded by Certicrimp II SAHT Widely used in the Aircraft and Military industries Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.59 kg (1.3 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system Certi-crimp SAHT (U Head) Design now superseded by Certicrimp II SAHT Widely used in the Aircraft and Military industries Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.59 kg (1.3 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system Page 9
2 Double Action Hand Tool Note: The specifications shown against the tools listed are only applicable when using terminals wires recommended for the relevant industry Widely used in Aircraft and Military applications Terminal locator / support and wire stop on many tools Insulation adjustment on many tools Approximate weight 0.54 kg (1.2 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system Standard Tool for PIDG & PLASTIGRIP Terminals and Splices Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE6161 Marks the applied product with a one dot indent code Standard Tool for PIDG & PLASTIGRIP Terminals and PIDG Splices - GB Railways Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE6161 Marks the applied product with a one dot indent code GB Special for PIDG & PLASTIGRIP Ring Tongue's & FASTON's Meets Mil-T AMP specified level for Ringtongues only Marks the applied product with a one dot indent code French PIDG & PLASTIGRIP Ring Tongue Tool - includes French Instuction Sheet Meets Mil-T AMP specified level Marks the applied product with a one dot indent code Standard Tool for PIDG & PLASTIGRIP Terminals and Splices - GB Railways Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE6161 Marks the applied product with a two dot indent code GB Special for PIDG & PLASTIGRIP Ring Tongue's and FASTON's: Meets Mil-T AMP specified level for Ring Tongues only Marks the applied product with a two dot indent code French PIDG & PLASTIGRIP Ring Tongue Tool - includes French Instuction Sheet Meets - Mil-T AMP specified level Marks the applied product with a two dot indent code Standard Tool for Solistrand Terminals and Splices Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE Special GB Railways PIDG Faston Tool Qualifications: LUL; RSE 024 pt6 & EE Special GB Railways PIDG Faston Tool Qualifications: LUL; RSE 024 pt6 & EE French PIDG Faston Tool Marks the applied product with a one dot indent code Special GB Aerospace PIDG & PLASTIGRIP Ring Tongue Tool. Equivalent to but has special retaining pins/rings to reduce the risk of tool parts falling off whilst building and maintaining aircraft Special GB Aerospace PIDG & PLASTIGRIP Ring Tongue Tool. Equivalent to but has special retaining pins/rings to reduce the risk of tool parts falling off whilst building and maintaining aircraft Special GB Solistrand Terminals and Splices tool Qualifications: Mil-T-7928, LUL, RSE 024 pt6 & EE6161 Equivalent to but has special retaining pins/rings to reduce the risk of tool parts falling off whilst building and maintaining aircraft (26-22) (22-16) (22-16) (22-16) (20-16) HD (22-10) (22-18) (26-22) (20-18) (22-10) Page 10
3 C-Head SAHT Base Tool without Die-set Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.86 kg (1.9 lbs) Many crimp heads can be easily adapted to our pneumatic 626 system Widely used in Aircraft and Military applications Die-set - C-Head SAHT A range of Die-sets for many premium crimp applications Use in: Hand Tool Frame Straight action Head or 626 C-Head adapter for PIDG, PLASTIGRIP, Terminals & Splices (22-16) for Expanded Insulation PIDG, PLASTIGRIP, Terminals & Splices (12-10) for PIDG, PLASTIGRIP Terminals & Splices (12-10) for SOLISTRAND Terminals & Splices (22-16) for SOLISTRAND Terminals & Splices (12-10) & HD for MULTI-MATE - Submin RG for MULTI-MATE - Submin RG for MULTI-MATE - Submin RG for Ultra Fast 8 (10) for Ultra Fast 4.0 (12) for Powerband Terminals 8.0 (6) for Powerband Terminals 6.0 (10) for Powerband Terminals (14-12) for Coax T5 & T9 - Centre Contact Felecia 2709/3/9/13 & 2207 Filotex for Coax T5 & T9 - Outer ferrule Felecia 2709/3/9/13 & 2207 Filotex for PIDG STRATOTHERM 1.5 (16) for PIDG STRATOTHERM 1.0 (18) for PIDG STRATOTHERM 6.0 (10) for PIDG STRATOTHERM 4.0 (12) Page 11
4 Heavy Head Hand Tool Note: The specifications shown against the tools listed are only applicable when using terminals recommended for the relevant industry Widely used in Aircraft and Military applications Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.95 kg (2.1 lbs) Heads can be adapted to the pneumatic 626 system Standard Tool for PIDG & PLASTIGRIP Terminals and Splices - GB Railways Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE6161 Marks the applied product with a one dot indent code (12-10) HD for Expanded Insulation PIDG, PLASTIGRIP, Terminals & Splices (12-10) Special GB Railways PIDG Faston Tool Qualifications: LUL, RSE 024 pt6 & EE (12-10) Special GB Aerospace PIDG & PLASTIGRIP Ring Tongue Tool (12-10) Equivalent to but has special retaining pins/rings to reduce the risk of tool parts falling off whilst building and maintaining aircraft Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices (24-22) 0.5 (21) 1.0 (18) 1.5 (16) 2.5 (14) 4.0 (12) 6.0 (10) Page 12
5 Tetra-Crimp Hand Tool Base Tool without Die-set Terminal loactor / support and wire stop on many tools Approximate weight 0.64 kg (1.4 lbs) Die-set for Ultra Fast Use In Hand Tool Frame Die-set for Ultra Fast Plus Use In Hand Tool Frame Die-set for Ultra Fast Plus Use In Hand Tool Frame Complete Tool for PIDG, PLASTIGRIP Terminals & Splices Meets UL requirements Die-set for Ultra Fast Use In Hand Tool Frame Die-set for Ultra Fast Use In Hand Tool Frame (26-22) (22-18) (22-10) (22-18) PEZ Base Tool without Die-set Flap type terminal locator Page 13
6 Certi-Lok Base Tool without Die-set Ergonomic non-slip handles Approximate weight 0.64 kg (1.4 lbs) Die-set for PIDG, PLASTIGRIP - All Types Use in Hand Tool Frame GB Railways PIDG & PLASTIGRIP Faston & Ringtongue Tool (Signal only) Meets; Mil-T 7928 F, VG 88720, DIN Die-set for SOLISTRAND Terminals & Splices Use in Hand Tool Frame (20-10) (22-10) Reel-Fed Certi-Lok A unique tool that applies terminals from special small reels Terminal feeding and cutting device for MODU IV (24-20) for MICRO MATCH COSI contact (24-20) for MICRO MATCH COSI contact (28-24) Page 14
7 Ergocrimp Base Tool without Die-set Note: Not Compatible with SDE Dies Virtually a straight action jaw closure Approximate weight 0.59 kg (1.3 lbs) ERGOCRIMP Dies can also be used in: Head for the 626 Pneumatic System Die-set for PIDG, PLASTIGRIP - All Types Use in Hand Tool Frame (22-10) Mini Certi-Lok A light weight and compact tool for many commercial applications Easy terminal positioning with 'Flap Locator' (some tools) Approximate weight 0.46 kg (1.0 lbs) Special MODU IV tool for VW & Audi (24-20) Complete Tool for Wire End Ferrules Complete tool for Wire End Ferrules Modular Mini Certi-lok Based on the Mini Certi-Lok tool Short handle assembly Long handle assembly Comprising of heads with identical features to the Mini Certilok tool, but with a choice of two handle lengths where appropriate. Interchangerbility is made easy via two push-out pins Complete tool (long handles) for MQS FFC Terminals to Foil (2.54mm pitch) 1 to 10 Posn. Page 15
8 C-Frame Hand Tool Base Tool without Die-set Double action jaw closure Approximate weight 0.55 kg (1.2 lbs) Complete tool for ADK Series Back Shell 6.0 mm Cable Dia Max Complete tool for ADK Series Back Shell 7.5 mm Cable Dia Max Complete tool for ADK Series Back Shell 8.5 mm Cable Dia Max Complete tool for ADK Series Back Shell 9.5 mm Cable Dia Max D-Frame Tool Fixed Die-sets Small and lightweight Approximate weight 0.55 kg (1.2 lbs) for Coax - BNC, TNC Cable Dia 5 & 6mm for HE14 Crimp-on Snap-in (28-24) Complete Tool with square crimp form for Wire Wire End Ferrrules (21-10) Page 16
9 Trapezium Crimp Tool Special Trapezium crimp tool for Wire-end Splice applications Complete Tool with trapezium form crimp for Wire End Splices (26-10) Complete Tool with trapezium form crimp for Wire End Splices (21-6) Complete Tool with trapezium form crimp for Wire End Splices (8-6) Square Crimp Tool Special Square crimp tool for Wire-end Splice applications Complete Tool with square crimp form for Wire Wire End Ferrrules (28-10) Complete Tool with square crimp form for Wire Wire End Ferrrules (19-8) Page 17
10 Service Tool Base Tool without Die-set Approximate weight 0.59 kg (1.3 lbs) Complete Tool for Wire End Ferrules (4-2) Complete Tool for Wire End Ferrules 50 (1/0) Die-set for Cl-2 contact, MICRO & JUNIOR POWER TIMER Use in Hand Tool Die-set for MICRO TIMER and D / EDS 1.5 mm contact Use in Hand Tool (21-14) (21-14) Page 18
CERTI-CRIMP SAHT Design now superseded by Certicrimp II SAHT Widely used in the Aircraft and Military industries
CERTI-CRIMP II SAHT Standard Straight Action Hand Tool Design Widely used in the Aircraft and Military industries Emergency ratchet release feature Terminal loactor / support and wire stop on many tools
Product Overview. TE Connectivity s CERTI-CRIMP Hand Tools. Find the TE CERTI-CRIMP Hand Tools for your design at thinkallied.com/te-top-products
Hand Tools Product Overview TE Connectivity's CERTI-CRIMP Hand Tools are premium, hand-operated tools for crimping a broad array of terminals. They are designed to meet and anticipate customers ever-changing
COMMERCIAL PORTABLE CRIMP TOOLING
COMMERCIAL PORTABLE CRIMP TOOLING A FLEXIBLE APPROACH TO PORTABLE CRIMPING INTRODUCTION TO TOOLING SOLUTIONS TE Connectivity. A Leader in Crimp Quality. Anyone can make a tool to crimp terminals onto a
SDE Standard Die Envelope Crimp Tooling
SDE Standard Die Envelope Crimp Tooling Standardize Your Crimp Tooling These versatile hand tools and dies are ideally suited for R & D, networking applications and on-site maintenance work. User-adjustable
Special Crimping Machines for Loose Piece Terminals
Special Crimping Machines for Loose Piece Terminals Crimping Machines for Loose Piece Terminals Common Features of AT Crimping Machines for loose piece terminal applications Economic and flexible processing
CERTIFIED PORTABLE CRIMP TOOLS
CERTIFIED CERTI-CRIMP PORTABLE TOOLS FOR OPTIMUM PERFORMANCE INTRODUCTION TO TOOLING SOLUTIONS TE Connectivity. A Leader in Crimp Quality. Anyone can make a tool to crimp terminals onto a wire. But not
File E13288 Vol. 1 Sec. 24 Page 1 Issued: Vol. 22 Sec. 2 Revised: and Report
File E13288 Vol. 1 Sec. 24 Page 1 Issued: 1979-10-01 Vol. 22 Sec. 2 Revised: 2015-08-19 DESCRIPTION PRODUCT COVERED: USL - General use wire connectors, terminals, butt and parallel connectors. Catalog
Specialty Hand Tools and Accessories Easier on the Hand, Precise on the Crimp
From the SDE Tooling Family for Production Versatility Catalog 1773380 Revised 8-05 Specialty Hand Tools and Accessories Easier on the Hand, Precise on the Crimp PRO-CRIMPER III Hand Tool Part No. 354940-1
SDE Standard Die Envelope
Termination and Crimping Tools SDE Standard Die Envelope The Standard Die Envelope (SDE) is a new approach to crimp die interchangeability. This flexibility in die options provides the capability to crimp
AMP Precision Pin and Socket Contacts [ ] A ± [6.35] Dia. Ferrule Part No Part No.
![AMP Precision Pin and Socket Contacts [ ] A ± [6.35] Dia. Ferrule Part No Part No.](/thumbs/83/87138608.jpg "AMP Precision Pin and Socket Contacts [ ] A ± [6.35] Dia. Ferrule Part No Part No.")
Coaxial Contacts Subminiature, Crimp, Snap-In, Size 16 1.010 [25.65] Ref..650 [16.51] Ref. 0.107 +.005.000 [2.718 +.127.000].250 [6.35] A ±.003 ±.076 Material Outer Shell Brass per MIL-C-50 Center Conductor
Product Specification provides test and performance results for insulated terminals and splices for Class 1 E Nuclear applications.
This specification covers the requirements for application of PIDG terminals, splices, and end caps in various operating environments. Each consists of a precision formed metal wire barrel and a copper
Tools for Screw-machined Contacts Revised: July 2012 AF8. AF8 - Turret
AF8 601967-1 AF8 [M22520/1-01] Crimp Tool without Turret 2031846-1 WA27F (Pneumatic AF8) without Turret to Military standard Many Turrets available AF8 - Turret Accurately positions Contacts in the Tool
D Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
AUG 15 Rev M
ORIGINAL INSTRUCTIONS PRO-CRIMPER III Hand Crimping Tool Assembly 58433-3 with Die Assembly 58423-1 Instruction Sheet 408-9252 21 AUG 15 Rev M PROPER USE GUIDELINES Cumulative Trauma Disorders can result
Miniature Circular Plastic Connector (CPC)
Miniature Circular Plastic Connector (CPC) Application Specification 16 SEP 03 Rev O All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
APR 15 Rev A
ORIGINAL INSTRUCTIONS CERTI-CRIMP* Hand Tools 47386-4, 47387-7, and 525690-1 Instruction Sheet 411-1050 24 APR 15 Rev A PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use
Crimping Dies for SOLISTRAND* Terminals and Splices
ORIGINAL INSTRUCTIONS Crimping Dies for SOLISTRAND* Terminals and Splices Instruction Sheet 408-8691 02 AUG 18 Rev H1 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use
DESCRIPTION 3. DIE INSTALLATION AND REMOVAL Die Removal (Figure 3) 3.1. Die Installation (Figure 3) Hydraulic Hand Tool
Crimping Dies Instruction Sheet for SOLISTRAND* 08 869 s and Splices 9 APR PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools
CRIMP CONNECTORS & ACCESSORIES Universal Crimp Termination System. Heavy-duty lightweight stamped steel frame.
Universal Crimp Termination System Extron Universal Crimp Tool Four in One Coax BNC Connector Crimp Tool The affordable heavy-duty Universal BNC Crimp Tool was designed by Extron to be the single tool
Data Signal Voice. General Purpose Crimpers
General Purpose Crimpers The Greenlee professional KWIK CYCLE crimping systems consist of two crimp tool platforms with over 40 interchangeable crimping dies! Manually crimp to factory specifications coaxial
AMP Precision Pin and Socket Contacts. Spring, Stainless Steel. Pin
Signal Contacts Type III+, Crimp, Snap-In [.0625 +.0010.0020 [1.588 +0.025 0.051] Body Spring, Stainless Steel Spring, Stainless Steel [9.91] Min. Ferrule, Brass, Nickel Flash.113 [2.87] Max. and See chart.
Tools. Crimping Tools 120. Contact Removal Tools 124. Workshop Tools 126
Crimping Tools 120 Contact Removal Tools 124 Workshop Tools 126 A wide range of crimping tools to suit popular terminals and connectors. Crimping Tools HDT-48-00 DE-D2682 Tight, complete crimp with minimal
1. Actuate the upper die release button located in the C head or closed head. 2. Slide the nest into place in C head or closed head. See Figure 2.
The die assemblies consist of stationary dies (nests) and moving dies (anvils). The dies are retained in the crimp tool by retainer pins. Refer to the table in Figure 3 to ensure the compatibility of die
Tools for crimp contacts
Tools for crimp termination D-Sub-S, D-Sub-HD, DIN 41 612 Identification Service crimp tool standard contacts high density contacts Part No. 09 99 000 0175 09 99 000 0596 HARTING- Crimp tool for 500 bandoliered
Quick Reference Guide RF Coaxial Connectors
Quick Reference Guide Coaxial RF Products: Quick View Product Operating Frequency (Max.) Impedance VSWR Durability (Mating Cycles) Operating Temp. Coupling Style Standard 7/16 7 GHz 50 Ω 1.02 + 0.03f up
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
Tools for other contacts Tools for FOC contacts Crimping machine TC-C Crimping machine TK-M
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han-Yellock... 99.06 for contacts Han C... 99.09 for contacts D-Sub... 99.11 for other contacts... 99.12 for FOC contacts...
Network Cables 12. Flat Ribbon Cables 13. Coaxial Cables 14. Test Cables 15. Video Interconnect Cables 16. D-Sub Cables 17
Cable Assemblies Network Cables 2 Flat Ribbon Cables 3 Coaxial Cables 4 Test Cables 5 Video Interconnect Cables 6 D-Sub Cables 7 Circular Connector Assemblies 8 System Tails 9 Cable Looms 20 Specialized
OCT 14 Rev K
ORIGINAL INSTRUCTIONS Hand Crimping Tool 68026 for TERMI-FOIL* Product Instruction Sheet 408-2363 27 OCT 14 Rev K PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
Terminals and Splices 19 OCT 11 Rev D. Crimping Dies for Head Numbers 69065, 69067, and Hand Tool Yoke. Place Screwdriver Here to Remove Dies
Instruction Sheet Crimping Dies for SOLISTRAND* 408-9786 Terminals and Splices 19 OCT 11 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
Product Specification provides test and performance requirements for 4.75 mm [.187 in.] FASTIN FASTON Series Modular Connectors.
![Product Specification provides test and performance requirements for 4.75 mm [.187 in.] FASTIN FASTON Series Modular Connectors.](/thumbs/93/112945232.jpg "Product Specification provides test and performance requirements for 4.75 mm [.187 in.] FASTIN FASTON Series Modular Connectors.")
This specification covers the requirements for the application of FASTIN FASTON Tabs, Receptacles, and Housings. The connectors are designed to accept a wire size range of 26 8 AWG. These contacts are
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
Connectors - Crimp Terminals
Technical portal and online community for Design Engineers - www.element14.com 11 Connectors - Crimp Terminals Page Page Bootlace Ferrules... 11 Non Insulated Crimp Terminals... 1315 Heat Shrink Terminals...
Part Number. Military Part Number
Tools Contact Tools Crimp Tools and Positioners Miniature Adjustable Crimp Tools A These crimp tools perform precision eight indent crimps for gas tight wire terminations and excellent tensile strength.
SOLISTRAND* Flag Terminal Crimping Dies
SOLISTRAND* Flag Terminal Crimping Dies Instruction Sheet 408-8908 22 DEC 10 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Complete Product Cross Reference List Last Update: 01/22/07
Paladin Tools 1101 200-014 Self-Adjusting Stripper Paladin Tools 1105 200-010 Stripper Paladin Tools 1106 200-001 Stripper Paladin Tools 1107 200-002 5" Diagonal Cutters Paladin Tools 1108 200-002 5" Diagonal
Tooling intro. Overview TRIM TRIO tooling. Crimptooling for TRIM TRIO contacts
intro Overview TRIM TRIO tooling Crimptooling for TRIM TRIO contacts The TRIM TRIO connection system not only offers versatility in connectors but production versatility in tooling as well. All information
2. Remove assembly pins from mounting lugs as. shown in Figure 1.
This instruction sheet provides instructions on product application and Maintenance and Inspection for Insulation Piercing COPALUM Terminal and Splice Crimping Heads (68081 and 68082) used in Pneumatic
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Product Facts For single and multiple wire applications Nylon or vinyl or
CATALOG. AEROSPACE * MEDICAL * AUTOMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949)
CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MICRO CONNECR REFERENCE MILSPECWEST MICROTECH COMTRONICS DESCRIPTION MSW-G-B-02S-040* DP-2S-1 CMR-O2-B-02S
IT - ITS - ITS-RG - ITZ Connectors
CONNECTOR CONTCTS Series Presentation Contacts in this chapter can be used for the following circular connector series: IT, ITZ, ITS and ITS RG. Threaded IT series have been designed to be fully conform
Squeeze-Eze Power Packs and Jaws
Squeeze-Eze Power Packs and Jaws BEND-EZE Cut and Bend Tool Air-powered cut and bend tool which cuts components on P.C. boards 1/16 above the surface and bends them over tight to the board. The tool is
Quick Interchangeable Ratcheting Crimper Frame
43 44 CP-3005F Quick Interchangeable Ratcheting Crimper Frame mechanical design with special quick release trigger secures die for quick, easy changes without tools Made from high quality carbon steel
NEWS KNIPEX Quality Made in Germany
NEWS 2014 KNIPEX Quality Made in Germany Product videos KNIPEX Pliers Wrench XL Pliers and a wrench in a single tool The unique installation tool now also in 400 length. For opening widths up to 85 / 3
Terminal and Splice , , and JUN 12 Rev D NOTE. CERTI-CRIMP* Hand Crimping Tool Ratchet Control CAUTION NOTE
Terminal and Splice Instruction Sheet Crimping Tools 408-1254 69339, 69354-1, and 69355 11 JUN 12 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered
Power Connectors for Industrial and Commercial Applications
Table of Contents AMP, AMPINNERGY, AMPOWER, AMP-O-LECTRIC, AMP-TAPETRONIC, DIAMOND GRIP, ELCON, RAYCHEM, SOLISTRAND, and TYCO are trademarks. AMP Power Series Connectors Selection Guide and Overview 3,4
Preparation and Installation Tools and Accessories
TOOLS & Acc. Preparation and Installation Tools and Accessories Crimp tools and kits, cutters, strippers, and pliers and more N Connector Installation Kits... 88 Heavy-duty, Professional Grade Coaxial
CABLE ASSEMBLY CATALOG
CABLE ASSEMBLY CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MILSPEC CONNECRS Milspecwest is known for Micro connectors. With many years of connector
MCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
Blackhawk by Proto pliers are manufactured to meet and exceed the demands of the automotive and industrial professionals. Alloy steel construction
PLIERS DESIGNED TO GET THE JOB DONE Blackhawk by Proto are manufactured to meet and exceed the demands of the automotive and industrial professionals. Alloy steel construction and heat-treated for strength
FEB 18 Rev D
ORIGINAL INSTRUCTIONS Terminal and Splice Crimping Die Assemblies Instruction Sheet 408-1632 01 FEB 18 Rev D PROPER USE GUIDELINES Cumulative trauma disorders can result from the prolonged use of manually
AS39029 Electrical Connector Contacts
AS39029 Electrical Connector Contacts Summary of Contact Types Signal and Thermocouple EMI Filter Coax/Twinax Optoelectronic Pneumatic Gas/Fluids Nano/Micro TwistPin Power and LouverBand Hermetic #8 Quadrax
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
Series 791 Connectors
Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5
both pin and sleeve contacts.
The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms
Mini-Mac Applicator Application Tooling Specification Air Feed-Mylar Tape Order No
Mini-Mac Applicator Application Tooling Specification Air Feed-Mylar Tape Order No. 63885-0900 FEATURES ΠDirectly adapts to most crimp presses and automatic wire processors ΠApplicator designed to industry
AEC Weekend Seminars Tools Looking beyond the screwdrivers and wrenches... Tools
Tools There are a few electrical system tools unique to building an airplane. Specialty crimp tools Insertion/extraction tools for crimped on pins Special wire strippers (Teflon/Tefzel) Cable cutting tools
Tool Operation and Use Guide
Tool Operation and Use Guide Support: 1.800.272.8665 Int l Phone: 001.804.550.1121 E-Mail: Web: paladin@paladin-tools.com www.paladin-tools.com 1112 AM 12 Twisted Pair Cable Stripper Strip/cut up to 0.2
MULTI CONNECTION SYSTEM. Product Overview
MULTI CONNECTION SYSTEM Product Overview THE ENTIRE RANGE OF MCS CONNECTORS MICRO Pin spacing: 2. mm Conductor sizes: 0.08 0. mm 2 (28 20 AWG) The Most Compact MCS MICRO Connector System with CAGE CLAMP
Mini-Mac Applicator Application Tooling Specification Air Feed-Mylar Tape Order No
Mini-Mac Applicator Application Tooling Specification Air Feed-Mylar Tape Order No. 63885-1300 FEATURES ΠDirectly adapts to most crimp presses and automatic wire processors ΠApplicator designed to industry
Hydraulic Hand Crimping Tool, PN
ORIGINAL INSTRUCTIONS Hydraulic Hand Crimping Tool, PN 59975-1 Instruction Sheet 408-6758 21 JUN 17 Rev F PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually
N Connector Installation Kits
N Connector Installation s ONE KIT PROVIDES EVERYTHING FOR LMR-400 N CONNECTOR INSTALLATION Refill part numbers in table below Each kit contains: Assembly Instructions Professional Grade Crimp Tool and
Pin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches
Crimpers and Wire Prep Tools. Electrical / Electronic, CATV / Satellite, Voice / Data / Video, Automotive, Wire Rope, Industrial
Crimpers and Wire Prep Tools Electrical / Electronic, CATV / Satellite, Voice / Data / Video, Automotive, Wire Rope, Industrial Sargent Tools traces its origin to the William Schollhorn Co., New Haven,
Crimping and Cutting Tool for Connectors, Accommodates wire. From No. 10 to 22 Awg CRIMPING/CUTTING TOOL FOR CONNECTORS. from No.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1005 Crimping/Cutting Tool For Connectors Klein Tools Catalog Number 1005 Manufacturer Klein Tools Description Crimping
innovations Paladin Tools Quick Guide Flat Telephone Cable Twisted Pair Cable Fiber Optic Cable Coaxial Cable Electrical & Industrial Cable
Paladin Tools pages 2-19 Quick Guide First in flight: The Wright Brothers. This catalog celebrates Paladin Tools 25 years of innovation. Founded in 1977, Paladin Tools is the leader in tool development
High Current Pin and Socket Contacts 31 JUL 13 Rev C
Application Specification High Current Pin and Socket Contacts 31 JUL 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
Application Tooling. Application tools to ensure PERFORMANCE RELIABILITY INTEGRITY PRECISION PRODUCTIVITY. The correct tool for the job INTRODUCTION
INTRODUCTION Application tools to ensure PERFORMANCE RELIABILITY INTEGRITY PRECISION PRODUCTIVITY. The correct tool for the job Every day, you count on your application tooling to be reliable and accurate.
Coaxial Contacts General Description. Contacts AMPHENOL COAXIAL CONTACTS
s General Description AMPHENOL COAXIAL CONTACTS Offer several advantages f reliable interconnection and continued perfmance: Large crimping area assures low contact resistance and high tensile strength
PERFORMANCE SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB, PIN CONTACT, CLASS 2)
INCH-POUND MIL-PRF-49142/3G 05 February 2016 SUPERSEDING MIL-PRF-49142/3F 18 April 2005 PERFORMANCE SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB, PIN CONTACT,
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
New Paladin Tools Products March 2010
New Paladin Tools Products March 2010 Electrical Cutters & Strippers PA1117 Wire Stripper 22-10 AWG* PA1118 Wire Stripper 30-20 AWG * PA1123 Wire Stripper Bundle * Upgraded existing products with dual-material
CABLE ASSEMBLY CATALOG
CABLE ASSEMBLY CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MILSPEC CONNECRS Milspecwest is known for Micro connectors. With many years of connector
Amphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications
Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the
Double thick tongue. Tongue Wire Stud Hole CT-930, CT-930CH, S4-10R-E
Type S-R Seamless tubular barrel Beveled wire lead-in Tubular Ring Terminal, Non-Insulated Double thick tongue A. B.Cable Ties B L T W Inspection Window Min. Tensile Strength of Tubular Ring Terminals
multifunctional crimp tool with rotational crimp dies Consist of tool frame and various pairs of exchangeable rotational crimp inserts
BEX HAND TOOLS multibex multifunctional crimp tool with rotational crimp dies Consist of tool frame and various pairs of exchangeable rotational crimp inserts Multibex is suitable for crimping: uninsulated
Small Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
il/aerointerconnect Solutions for Military & Aerospace
il/aerointerconnect Solutions for Military & Aerospace Interconnect Solutions That Fuel Customer Success At Winchester Interconnect, we believe that design creativity and streamlined execution can solve
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
Contacts M39029 and Glenair signature solutions MIL-DTL Series III type
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated
Connect - Contact - Control. Connectors. Short Form Catalogue
Connect - Contact - Control Connectors Short Form Catalogue Components for electrical engineering Schaltbau connectors nowadays ensure good connections in all areas of electrical engineering. The product
Refer to Figure 2 and select the appropriate wire, die assembly, and terminal or splice. Strip the wire to the length indicated in the table.
The die assemblies consist of stationary dies (nests) and moving dies (anvils). Refer to Figure 2 to ensure the compatibility of die assemblies, crimping heads, and terminals and splices. The shanks on
Application Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
Electrical Components Catalog RF Connectors
Introduction Product Facts Designed and Manufactured to meet MI-C-39012 Requirements Wide Range of Connectors available in 50 and 75 Ohm Impedance The range offers connectors to suit from DC-11 GHz Operation
TNC Series. Interface Mating Dimensions. Coaxial Connectors
TNC connectors are designed with a Highly reliable threaded coupling to ensure additional protection against shocks and vibrations. They are dimensionally and electrically similar to the BNC series, and
Professional Pliers. Quality to Depend on
Professional Pliers Quality to Depend on - 227 - High Leverage Pliers High Leverage Pliers High Leverage pliers boast a labor-saving design to generate greater productivity with less effort. Ergonomic
Housings and Contacts 20 JUL 11 Rev G
Application Specification Cluster Block 114-2019 Housings and Contacts 20 JUL 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
Why Use of Anderson Recommended Crimp Tooling is so Important
Why Use of Anderson Recommended Crimp Tooling is so Important Our connectors are designed to achieve the highest levels of durability, reliability, and performance as shown on the connector data sheets.
Checking Terminal Crimp Height or Gaging the Die Closure
Checking Terminal Crimp Height or Gaging the Die Closure Instruction Sheet 408-7424 27 MAR 18 Rev S 1. INTRODUCTION Crimp height comparators and plug gages are instruments recommended for verifying the
Panduit Lithium-Ion. Powered Crimping Tools INDUSTRY FIRST
INDUSTRY FIRST Panduit Lithium-Ion Powered Crimping Tools Panduit offers a broad range of crimping tools featuring Milwaukee Electric Tool s M8 XC high capacity lithium-ion batteries. First in the industry
INDUSTRIAL & COMMERCIAL TRANSPORTATION
INDUSTRIAL & COMMERCIAL TRANSPORTATION Terminals and Connectors Contents Tooling Overview... 182 Automated Tooling...182184 Hand Tools...185186 Removal Tools... 187 How To Instructions... 188190 Crimp
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
Crimping Dies for TERMINYL* and PLASTI-GRIP* Terminals and Splices
Crimping Dies for TERMINYL* and PLASTI-GRIP* Terminals and Splices Instruction Sheet 408-10051 11 APR 17 Rev D PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually
STANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
AMP Power Series Connectors
January 5, 2012 2012 Tyco Electronics Corporation. All Right Reserved. TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or Company names might be trademarks