CERTI-CRIMP SAHT Design now superseded by Certicrimp II SAHT Widely used in the Aircraft and Military industries

Size: px

Start display at page:

Download "CERTI-CRIMP SAHT Design now superseded by Certicrimp II SAHT Widely used in the Aircraft and Military industries"

Shanna Shaw
5 years ago
Views:

CERTI-CRIMP II SAHT Standard Straight Action Hand Tool Design Widely used in the Aircraft and Military industries Emergency ratchet release feature Terminal loactor / support

3 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system & Battery Tool CERTI-CRIMP SAHT Design now superseded by Certicrimp II SAHT Widely used in the

superseded by Certicrimp II SAHT Widely used in the Aircraft and Military industries Emergency ratchet release feature Terminal locator / support 3 lbs) Many crimp heads can

1 CERTI-CRIMP II SAHT Standard Straight Action Hand Tool Design Widely used in the Aircraft and Military industries Emergency ratchet release feature Terminal loactor / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.59 kg (1.3 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system & Battery Tool CERTI-CRIMP SAHT Design now superseded by Certicrimp II SAHT Widely used in the Aircraft and Military industries Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.59 kg (1.3 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system CERTI-CRIMP SAHT (U Head) Design now superseded by Certicrimp II SAHT Widely used in the Aircraft and Military industries Emergency ratchet release feature Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.59 kg (1.3 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system Page 10

Double Action Hand Tool Note: The specifications shown against the tools listed are only applicable when using terminals wires recommended for the relevant industry Widely used in Aircraft and

2 Double Action Hand Tool Note: The specifications shown against the tools listed are only applicable when using terminals wires recommended for the relevant industry Widely used in Aircraft and Military applications Emergency ratchet release feature Terminal locator / support and wire stop on many tools Insulation adjustment on many tools Approximate weight 0.54 kg (1.2 lbs) Many crimp heads can be easily adapted to the pneumatic 626 system French PIDG & PLASTIGRIP Ring Tongue Tool - includes French Instuction Sheet Meets Mil-T AMP specified level Marks the applied product with a one dot indent code (22-16) French tool for PIDG, PLASTIGRIP Terminals & Splices Marks the applied product with a one dot indent code GB Special for PIDG & PLASTIGRIP Ring Tongue's & FASTON's Meets Mil-T AMP specified level for Ringtongues only Marks the applied product with a one dot indent code GB Special for PIDG & PLASTIGRIP Ring Tongue's and FASTON's: Meets Mil-T AMP specified level for Ring Tongues only Marks the applied product with a two dot indent code Special GB Aerospace PIDG & PLASTIGRIP Ring Tongue Tool. Equivalent to but has special retaining pins/rings to reduce the risk of tool parts falling off whilst building and maintaining aircraft Special GB Aerospace PIDG & PLASTIGRIP Ring Tongue Tool. Equivalent to but has special retaining pins/rings to reduce the risk of tool parts falling off whilst building and maintaining aircraft Special GB Railways PIDG FASTON Tool Qualifications: LUL; RSE 024 pt6 & EE Special GB Railways PIDG FASTON Tool Qualifications: LUL; RSE 024 pt6 & EE Special GB Solistrand Terminals and Splices tool Qualifications: Mil-T-7928, LUL, RSE 024 pt6 & EE6161 Equivalent to but has special retaining pins/rings to reduce the risk of tool parts falling off whilst building and maintaining aircraft Standard Tool for PIDG & PLASTIGRIP Terminals and PIDG Splices - GB Railways Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE6161 Marks the applied product with a one dot indent code Standard Tool for PIDG & PLASTIGRIP Terminals and Splices - GB Railways Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE6161 Marks the applied product with a two dot indent code Standard Tool for PIDG & PLASTIGRIP Terminals and Splices Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE6161 Marks the applied product with a one dot indent code Standard Tool for Solistrand Terminals and Splices Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE (26-22) (22-16) (20-18) (22-18) (22-10) (22-16) (20-16) HD (26-22) (22-10) Page 11

C-Head SAHT 69710-1 - Base Tool without Die-set Emergency ratchet release feature Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight

3 C-Head SAHT Base Tool without Die-set Emergency ratchet release feature Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.86 kg (1.9 lbs) Many crimp heads can be easily adapted to our pneumatic 626 system Widely used in Aircraft and Military applications Die-set - C-Head SAHT A range of Die-sets for many premium crimp applications Use in: Hand Tool Frame Straight action Head or 626 C-Head adapter for Coax T5 & T9 - Centre Contact Felecia 2709/3/9/13 & 2207 Filotex for Coax T5 & T9 - Outer ferrule Felecia 2709/3/9/13 & 2207 Filotex for Expanded Insulation PIDG, PLASTIGRIP, Terminals & Splices (12-10) & (16-14) HD for MULTI-MATE - Submin RG for MULTI-MATE - Submin RG for MULTI-MATE - Submin RG for PIDG STRATOTHERM 1.5 (16) for PIDG STRATOTHERM 1.0 (18) for PIDG STRATOTHERM 6.0 (10) for PIDG STRATOTHERM 4.0 (12) for PIDG, PLASTIGRIP Terminals & Splices (12-10) for PIDG, PLASTIGRIP, Terminals & Splices (22-16) for POWERBAND Terminals 8.0 (6) for POWERBAND Terminals 6.0 (10) for POWERBAND Terminals (14-12) for SOLISTRAND Terminals & Splices (22-16) for SOLISTRAND Terminals & Splices (12-10) & HD for ULTRA FAST 8 (10) for ULTRA FAST 4.0 (12) Page 12

4 Heavy Head Hand Tool Note: The specifications shown against the tools listed are only applicable when using terminals recommended for the relevant industry Widely used in Aircraft and Military applications Terminal locator / support and wire stop on many tools Insulation adjustment feature on many tools Approximate weight 0.95 kg (2.1 lbs) Heads can be adapted to the pneumatic 626 system for Expanded Insulation PIDG, PLASTIGRIP, Terminals & Splices (12-10) & (16-14) HD Special GB Aerospace PIDG & PLASTIGRIP Ring Tongue Tool (12-10) Equivalent to but has special retaining pins/rings to reduce the risk of tool part falling off whilst building and maintaining aircraft Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Aerospace tool for thin-wall PIDG STRATOTHERM Terminals & Splices Special GB Railways PIDG FASTON Tool Qualifications: LUL, RSE 024 pt6 & EE Standard Tool for PIDG & PLASTIGRIP Terminals and Splices - GB Railways Qualifications: Mil-T-7928, LUL; RSE 024 pt6 & EE6161 Marks the applied product with a one dot indent code (24-22) 0.5 (21) 1.0 (18) 1.5 (16) 2.5 (14) 4.0 (12) 6.0 (10) (12-10) (12-10) HD Page 13

Tetra-Crimp Hand Tool 58078-3 - Base Tool without Die-set Emergency ratchet release feature Terminal loactor / support and wire stop on many tools Approximate weight 0.64 kg (1.

0 (22-10) Meets UL requirements 58079-3 Die-set for ULTRA FAST PLUS Use In Hand Tool Frame 58078-3 58080-3 Die-set for ULTRA FAST PLUS Use In Hand Tool Frame 58078-3 58052-3 Die-set

5 Tetra-Crimp Hand Tool Base Tool without Die-set Emergency ratchet release feature Terminal loactor / support and wire stop on many tools Approximate weight 0.64 kg (1.4 lbs) Complete Tool for PIDG, PLASTIGRIP Terminals & Splices (22-10) Meets UL requirements Die-set for ULTRA FAST PLUS Use In Hand Tool Frame Die-set for ULTRA FAST PLUS Use In Hand Tool Frame Die-set for ULTRA FAST Use In Hand Tool Frame Die-set for ULTRA FAST Use In Hand Tool Frame Die-set for ULTRA FAST Use In Hand Tool Frame (22-18) (26-22) (22-18) PEZ Base Tool without Die-set Flap type terminal locator Page 14

CERTI-LOK 169400 Base Tool without Die-set Ergonomic non-slip handles Approximate weight 0.64 kg (1.

7928 F, VG 88720, DIN 41611 0.6-6.0 (20-10) 169409 Die-set for SOLISTRAND Terminals & Splices Use in Hand Tool Frame 169400 0.4-6.

6 CERTI-LOK Base Tool without Die-set Ergonomic non-slip handles Approximate weight 0.64 kg (1.4 lbs) Die-set for PIDG, PLASTIGRIP - All Types Use in Hand Tool Frame GB Railways PIDG & PLASTIGRIP Faston & Ringtongue Tool (Signal only) Meets; Mil-T 7928 F, VG 88720, DIN (20-10) Die-set for SOLISTRAND Terminals & Splices Use in Hand Tool Frame (22-10) Reel-Fed CERTI-LOK A unique tool that applies terminals from special small reels Terminal feeding and cutting device for MICRO MATCH COSI contact (24-20) for MICRO MATCH COSI contact (28-24) for MODU IV (24-20) Page 15

ERGOCRIMP 539635-1 Base Tool without Die-set Note: Not Compatible with SDE Dies Virtually a straight action jaw closure Approximate weight 0.59 kg (1.

0 (22-10) Use in Hand Tool Frame 539635-1 Mini CERTI-LOK A light weight and compact tool for many commercial applications Easy terminal positioning with

0 1579004-4 Complete tool for Wire End Ferrules 0.08-10.

7 ERGOCRIMP Base Tool without Die-set Note: Not Compatible with SDE Dies Virtually a straight action jaw closure Approximate weight 0.59 kg (1.3 lbs) ERGOCRIMP Dies can also be used in: Head for the 626 Pneumatic System Die-set for PIDG, PLASTIGRIP - All Types (22-10) Use in Hand Tool Frame Mini CERTI-LOK A light weight and compact tool for many commercial applications Easy terminal positioning with 'Flap Locator' (some tools) Approximate weight 0.46 kg (1.0 lbs) Complete Tool for Wire End Ferrules Complete tool for Wire End Ferrules Modular Mini CERTI-LOK Based on the Mini Certi-Lok tool Short handle assembly Long handle assembly Comprising of heads with identical features to the Mini Certilok tool, but with a choice of two handle lengths where appropriate. Interchangerbility is made easy via two push-out pins. Page 16

C-Frame Hand Tool 6-1419172-9 - Base Tool without Die-set Double action jaw closure Approximate weight 0.55 kg (1.2 lbs) 1583684-1 Complete tool for ADK Series Back Shell 6.

5 mm Cable Dia Max 1583684-4 Complete tool for ADK Series Back Shell 9.5 mm Cable Dia Max D-Frame Tool Fixed Die-sets Small and lightweight Approximate weight 0.55 kg (1.

8 C-Frame Hand Tool Base Tool without Die-set Double action jaw closure Approximate weight 0.55 kg (1.2 lbs) Complete tool for ADK Series Back Shell 6.0 mm Cable Dia Max Complete tool for ADK Series Back Shell 7.5 mm Cable Dia Max Complete tool for ADK Series Back Shell 8.5 mm Cable Dia Max Complete tool for ADK Series Back Shell 9.5 mm Cable Dia Max D-Frame Tool Fixed Die-sets Small and lightweight Approximate weight 0.55 kg (1.2 lbs) Complete Tool with square crimp form for Wire Wire End Ferrrules (21-10) for Coax - BNC, TNC Cable Dia 5 & 6mm for HE14 Crimp-on Snap-in (28-24) Page 17

Trapezium Crimp Tool Special Trapezium crimp tool for Wire-end Splice applications 734641-2 Complete Tool with trapezium form crimp for Wire End

5-10 (21-6) 734641-4 Complete Tool with trapezium form crimp for Wire End Splices 10.

9 Trapezium Crimp Tool Special Trapezium crimp tool for Wire-end Splice applications Complete Tool with trapezium form crimp for Wire End Splices (26-10) Complete Tool with trapezium form crimp for Wire End Splices (21-6) Complete Tool with trapezium form crimp for Wire End Splices (8-6) Square Crimp Tool Special Square crimp tool for Wire-end Splice applications Complete Tool with square crimp form for Wire Wire End Ferrrules (28-10) Complete Tool with square crimp form for Wire Wire End Ferrrules (19-8) Page 18

Service Tool 734790-1 - Base Tool without Die-set Approximate weight 0.59 kg (1.

10 Service Tool Base Tool without Die-set Approximate weight 0.59 kg (1.3 lbs) Complete Tool for Wire End Ferrules (4-2) Complete Tool for Wire End Ferrules 50 (1/0) Die-set for Cl-2 contact, MICRO & JUNIOR POWER TIMER Use in Hand Tool (21-14) Die-set for MICRO TIMER and D / EDS 1.5 mm contact Use in Hand Tool (21-14) Page 19

General Hand Tool Types Certicrimp II SAHT. Certi-crimp SAHT. Certi-crimp SAHT (U Head) Features: Features: Features:

General Hand Tool Types Certicrimp II SAHT. Certi-crimp SAHT. Certi-crimp SAHT (U Head) Features: Features: Features: Certicrimp II SAHT Standard Straight Action Hand Tool Design Widely used in the Aircraft and Military industries Terminal loactor / support and wire stop on many tools Insulation adjustment feature on