Résume. Key Responsibilities and Achievements: TADELA. SIVAKUMAR Mobile: (+91)
|
|
- Carmel Douglas
- 5 years ago
- Views:
Transcription
1 Résume Carrier Objective TADELA. SIVAKUMAR Mobile: (+91) To work in a challenging environment builds up confidence, to invoke my technical creative position where my knowledge and technical skill can be utilized for achieving professional goals of the organization. Summary Total 18+ years of Competitive work experience in Structural Steel/PEB on various life cycle projects and has ability to work on various standards. Employment History 1) M+W GROUP HIGHTECH PROJECTS INDIA PVT. LTD Joined as Detailing Manager and promoted as Project Manager. From Feb 2013 Present. Reporting to VP. Attending Weekly scheduled meeting with Top management. Communicating and Motivating the down line people to reach the current day target. Attending the Client Meetings for open discussion related to project. Conducting Weekly meetings with Sub contractors to clarify their queries. Site visit includes resolving problems raised by erection engineers at site condition. Raising VO other than Tender Quantity to the Client. Checking the VO raised by the subcontractor by comparing RFI register and BOM, which will be submitted by the Sub contractor. As a single point contact person (as a coordinator) for our engineering to Client and Subcontractors, I need to communicate with the Top management and down line people to provide the solutions. Checking the Tekla models for member placement & grids by super imposing of DWG/DXF files as per CSA and contract drawings. Templates and report files creation as per client requirement. Quick decision making to be taken by me to provide solutions and the same time information will be transmitting to top management. RFI and Queries from the Sub contractors will be resolving. Additionally, I am checking vendor models for Profiles, orientation, elevation, dimensions, all type of connection details, erection clearances, member to member clash, and bolt to bolt clash by using Tekla. Checking of all vendor GA plans & elevation drawings to provide the approvals. Checking of weld sizes, weld symbols; pick points of dimension, orientation mark and bill of materials in shop drawings. Checking details and orientation marks in Erection drawings. Modelling the Conventional and PEB buildings as per committed schedule time. Finalizing vendor BOQ by comparing our GFC for weight variation to provide approval for bills claimed by vendor. Committed to achieve quality, schedules & targets. 1
2 : a). Michelin Tyre Projects (Chennai-Phase1 & 2) M+W high-tech projects India P. Ltd has got awarded 6500MT (PhaseI-3500MT, PhaseII-3000MT). I have taken charge as Detailing Manager for Steel Detailing Department(Modelling and checking) of all buildings including Internal and external pipe racks up to execution level with zero error for Phase-I. and I have taken charge as project Manager cum Detailing manager for Phase-II. And resolved all problems at the detailing stage to avoid the member clashes at erection stage. Here M+W has given Sub contract to JSSL Bangalore. I have approved all their GA and Coordinated with their tekla models at building Interface(Junction between buildings with different directional roofs). b). Mondelez Cadbury (Nilgiri projects- TADA). M+W high-tech projects India P. Ltd has got awarded EPC contract for 3500MT. This project consist 11 buildings including crumb tower, Chocolate process plant, Operational spine and Administrative building etc. I have coordinated between engineering department to Sub contractors (Fabricators and erectors) to get the things well up to execution level with zero error. As an approval authority I have checked all vendors (Sub contractors) GA and Connection design calculations with the help of down line people (Designers & Modelers) and it includes their factory visits to clarify their queries related to fabrication. Resolved all problems at the detailing stage and avoided the member clashes at erection stage. c). GlaxoSmithKline (BANGALORE). M+W high-tech projects India P. Ltd has got awarded only Design for 4000MT. This project consist 9 buildings including Production block, Main Office, Ware house, Goods In/Out, Packing building, Energy centre, Welfare centre, WTP, WWTP, Chillers etc. I have Managed CSA department (Civil, Structural and Architectural) to get the things done smoothly to make all submissions to client from 30%, 60% and 100% without any problems with 100% cooperation from designers and Modellers. 2) Metal scope India Private Limited.(Pondicherry) Manager(Drafting) / Project Coordinator, April 2011 Feb I was Reporting to General Manager for day schedule. Coordinating with down line people for current day target. Coordinating with clients for Commitments and queries related to projects. Communicating with Factory men for resolving queries related to fabrication and revised drawings. Site visit includes resolving problems raised by erection engineers at site condition. Checking of member placement & grids by super imposing of DWG/DXF files to the tekla models as per design or contract drawings. Templates and report files creation as per client requirement. Quick and accurate decision to complete the model and project in time without errors. Sending the RFI with Snap shots to concerned departments of the client office to get the required input. 2
3 Checking of Profiles, orientation, elevation, dimensions, all type of connection details, erection clearances, member to member clash, bolt to bolt clash in Tekla Models. Checking of all GA plans & elevation drawings for approvals. Checking of weld sizes, weld symbols; pick points of dimension, orientation mark and bill of materials in shop drawings. Checking details and orientation marks in Erection drawings. Modeling the Conventional and PEB buildings as per committed schedule time. Committed to achieve quality, schedules & targets. : a). Hundai (Chennai-Phase1) The MSIPL has got awarded Phase-1 for the Engineering, Fabrication and erection for 1200 MT. The entire project consist 7 buildings connecting with each other. Every building has different type of profiles based on UK/Indian environment. I have taken charge as Tekla Manager to catch-up 25 member s output (Modellers and detailers) to complete all buildings, and parallel I have modelled for some buildings. Project includes Main buildings, internal pipe racks/ external pipe rack and link bridges for connectivity of building to building and for cable passing provision (Cable trays). These building contains combination of built-up and hot rolled columns with splice joints, Angular bracings, Tie runners with batten plates, trusses, Fascia frames, Mezzanine floors, Jack beams, crane beams, mono rail supporting structures, Permanent and removable plat forms, raised roof opening structures, Pergolas, kickers.etc. 2). Geodesic Techniques(P)Ltd., Bangalore, India. Team leader/ Checker, April 2010 April 2011 Checking of member placement & grids by super imposing of DWG/DXF files to the tekla models as per design and contract drawings. Checking of Profiles, orientation, elevation, dimensions, all type of connection details, erection clearances, member to member clash, and bolt to bolt clash in Tekla Models. Checking of prelim models, BOM and shop drawings. Preparation and rising of technical queries (RFI) with the client and internal departments. Checking of all GA plans & elevation drawings for approvals. Checking of weld sizes, weld symbols; pick points of dimension, orientation mark and bill of materials in shop drawings. Creating of all type of report files, CNC files. Checking of all details and orientation marks in Erection drawings. Good co-ordination & communication with Top management and bottom line people. Committed to achieve quality, schedules & targets. Motivated Down line people to reach the targets : a) CHATRAPATHI SIVAJI MUMBAI INTERNATIONAL AIRPORT LIMITED (MIAL-T2B)-MUMBAI. The primary contractor is M/s. L&T. GTIPL have got awarded EPC as Sub contractor. This includes Engineering, Production and Construction). I have taken charge as Team leader with 40 members (Modellers and detailers) to Make Tekla models to prepare GA, shop drawings, bolt list, material list etc. to reach the target of MT. This project is involved different type of buildings connected internally each other with huge capacity of Mega columns 3
4 (60-70MT each column), and gadder beams. I have got promoted as project coordinator to control the system between engineering office to factory to avoid mistakes while fabricating. These buildings consist heavy sections like mega columns, pods, circular columns, sky light frames, trusses, butter fly trusses, curved parapet frames, cross over bridges, stair cases and hand rails. This building has regular connection details like moment connection, shear connections at different levels. 3) Kirby Building Systems (I) Ltd., Hyderabad, India Sr. Modeller, March 2006 April Created steel structural models for PRE ENGINEERING BUILDING (PEB) Industrial, Residential & Commercial complexes structures which includes Column, Beams, Rod and Pipe bracing etc., using Xsteel ver with standard detailing practice. Prepared Approval Drawings & construction Drawings for Anchor Bolt setting plan, sectional drawings, package Drawings(S.S.Doors, D.S.Doors, roof monitors, stair case drawings etc.), crane beam plat forms. Prepared side walls, end walls framing, sheeting elevations, arrangement of (industrial) louvers, framed openings, wall lights and windows. Prepared roof framing, sheeting plans, turbo vents, sky lights and required flashings & trims all around the building. Prepared bill of material as per Kirby standards. Controlled all buildings with phase manager to issue/release fabrication drawings without getting problem from factory and engineering side. And also raised RFI s to the clients and out sourced design departments. Hansen Drives ltd., The project involved detailing of structural members for a multi storied Automobile gears manufacturing building. The entire structure was done with AutoCAD and Xsteel. Very huge complications exist in the form of hipped and valley Beams, header system & EOT cranes, vertical & horizontal beam bracing, column lacing, strut tube connections in different directions at all levels. This led to acquiring of knowledge on seismic resistant moment connections and their intricacies. Renaults-Nissan Automotive ind. Ltd., The project involved modelling & detailing of structural members for a Automobile Cars manufacturing building. The entire structure is modelled in Xsteel. It has more complicated structure for MT with different connections in the form of Mezzanine & Joist Beams, vertical & horizontal pipe bracing for entire building. The project is completely done in multiuser environment in Xsteel, which was helped in completing the project with in short period by taking support from the tekla users. Other Projects has done as follows: M/s. Asian paints ltd. M/s. STI Phonix ltd. M/s. Ruchi Infrastructures Ltd. M/s. Indus fila Ltd. M/s. Jindal poly films ltd. M/s. Zen technologies M/s. Rockwool India ltd. M/s. Renault - Nissan automotive India (p) ltd M/s. G.B.R. Estates M/s. Industrial fans India pvt.ltd. M/s. Rangoli Knit Process M/s. Anand Constructions M/s. International stones (I) pvt.ltd. M/s. Galaxy machinery pvt.ltd. M/s. Cascade gelati pvt.ltd. M/s. S.S.V Builders M/s. Mahindra & Mahindra M/s. Sree Shubham Logistics M/s. Apollo Tyres M/s. Renault & Nissan M/s. Saudi University( 1 st Coeducational collage of Saudi Arabia). 4
5 4) M/s. Shanti Steel Industries limited. Hyderabad. Sr. Detailing Engineer/ Modeller, February 2003 March Creating and Generating of steel structural models for (UK. standards) Industrial, Residential & Commercial complexes structures with Column, Beams, Bracing, Trusses, Pipe racks, Shelters and miscellaneous Stairs, Ladders, Handrails etc., using Xsteel ver. 9.1 to 12.0 with complete deliverable documents of AISC standards. o Created General Arrangement drawings for approvals. o Created shop (Assembly & Single part) drawings, CNC out puts like NC files and DXF files for single parts. o Preparation of Erection Drawings. o Active participation in all phases of job to completion, including raising RFI s with client. MRF industries Pvt. Ltd The project involved detailing of structural members for a multi storied corporate office building. The entire structure is modelled in Xsteel. Lot of complexity exists in the form of curved Beams at all levels which calls for good technical skills in the connection details. Vertex Industries India Pvt.Ltd The project involved Modelling and detailing of structural Members. This project has multi (4 floors) stored with different types of channel boxed bracings, strut tube bracing, rod bracing, skewed beams involved. This led to acquiring of knowledge on seismic resistant moment connections and their intricacies. 5) M/s. Emjay tek corporation Pvt.Ltd, Hyderabad. Draftsman, Detailer & Production Engineer, May 1999 February Preparation of Drawings in AutoCAD for equipments & Steel structures like Boilers Basement structures, Reactors (Reaction vessels), Receivers, Heat Exchangers, Storage tanks, Chimneys, Filters, Driers & structural buildings. Preparing fabrication and erection drawings as per standards. Preparation of B.O.M as per engineering standards. Preparation of General Arrangement drawings for client approval. Supervision & co-ordination with sub-ordinates while Fabrication and erection. Preparation of as built drawings & documentation for equipments. Preparing Steel structural detail drawing for different type of Equipment support structures Preparation of Documents as per company standards. M/s. Reddy s Laboratories Ltd. M/s. Aurobindo Pharma Ltd. M/s. Saraca Laboratories M/s. Hetro Drugs Ltd. etc.., 6) M/s. Perfectem Industries Pvt.Ltd, Hyderabad. Draftsman & Production Supervisor, July 1995 May
6 Preparation of Drawings in AutoCAD for equipments & Steel structures like Industrial Blowers, Simplex and duplex Pumping units, Oil and Coal fired Boilers and its supporting basement structures, Reactors, Storage tanks, Chimneys, structural buildings. Preparing fabrication and erection drawings as per standards. Preparation of B.O.M as per engineering standards. Preparation of General Arrangement drawings for client approval. Supervision & co-ordination with factory workers while Fabrication and erection. Preparation of as built drawings & documentation for equipments. Preparation of plate cutting layouts to utilize the complete plate without wastage. Preparing Steel structural detail drawing for different type of Equipment support structures Preparation of Documents as per company standards. M/s. Suresh Constructions (Industrial shed) M/s. RAC reactors pvt.ltd (Blowers, Pumping units) M/s. Matrix Laboratories (Reactors, Blowers, Pumping units, basement structures) QUALIFICATIONS TECHNICAL : Diploma in Mechanical Engineering (S.M.V.M. Polytechnic, Tanuku.) Pursuing B.Tech Mechanical Engineering through Distance. OTHER TECHNICAL QUALIFICATIONS : 1) Diploma in Manual Drafting from Kakatiya Academy, Kakinada. PACKAGES : (Xsteel) Tekla Structures version 9.1 to 19 Revit Structure V13 & 14 AutoCAD R12 to 2013 & MSOffice. (MS word, MS Excel, MS power point) Photo Shop, PageMaker..etc PERSONAL DETAILS Father s Name : Late Sri.T.Apparao. Permanent Address : Plot no:23, Flat-S1, Pavani palms, Block-Y, Ambattur to Puzhal road, Surapet, Chennai Date of Birth : 19 th May, Marital Status : Married Passport No : F Languages Known : Telugu, Hindi, English, and Tamil I hereby declare that the above information furnished is true to the best of my knowledge and belief. Signature, (Sivakumar. Tadela) 6
From. X.Antony Caston No,23 Anthoniyar Kovil Street, Beemanagar, Trichy The Manager, Sub : Application for the post of Tekla Modeler
From To X.Antony Caston No,23 Anthoniyar Kovil Street, Beemanagar, Trichy 620001. The Manager, Sub : Application for the post of Tekla Modeler Respected Sir, I wish to introduce myself as X.Antony Caston,
More informationDETAILED ENGINEERING OF PROCESS PIPING SYSTEMS
LAST UPDATED 25-10-2017 DETAILED ENGINEERING OF PROCESS PIPING SYSTEMS COURSE DURATION: 5 DAYS REACH US Today for Greater Safety, Quality, Reliability, Productivity, Profitability HRD Approved Class A
More informationAdvance Steel Essentials
Advance Steel Essentials Course Length: 3 days This course is intended to give an overview of all of the basic commands that are required to create structures and associated documentation using the Autodesk
More informationAdvance Steel 2010 / SP2
Advance Steel 2010 / SP2 This document describes the improvements in Service Pack 2 for Advance Steel 2010. Advance Steel 2010 SP2 is Windows 7 compliant! BOM/LISTS New sorting option in Drawing index
More informationChemionix Solutions. Outsourcing. Engineering. Drafting
Chemionix Solutions. Outsourcing. Engineering. Drafting Chemionix Your Outsourcing Partner Companies have been outsourcing since time began. It is only recently that business processes can be outsourced
More informationSmartBrains. Process Plant Layout & Piping Design engineering. Institute of Oil and Energy. What You Will Learn...
SmartBrains Institute of Oil and Energy Oil & Energy Process Plant Layout & Piping Design engineering What You Will Learn... Introduction to Industry. Role of a Piping Engineer in various fields of industry.
More informationAVEVA PDMS. Business Benefits. Accurate and clash-free 3D plant design
AVEVA PDMS Accurate and clash-free 3D plant design With ever increasing global demand for products from process and power plants, AVEVA PDMS enables companies to design, construct and maintain high quality
More informationAVEVA PDMS 12.0 The 3D plant design application for accurate and clash-free plant design
AVEVA PDMS 12.0 The 3D plant design application for accurate and clash-free plant design The process and power industries seek to commission high-quality plant earlier, and to bring it on line with minimum
More informationSECTION PROJECT COORDINATION VIA BIM
SECTION 01 31 13 PROJECT COORDINATION VIA BIM PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division
More informationTABLE OF CONTENTS INTRODUCTION...4
Starting Guide TABLE OF CONTENTS INTRODUCTION...4 Advance Steel... 4 Where to find information?... 5 INSTALLATION... 5 System requirements... 5 Starting the installation... 5 STARTING ADVANCE STEEL...
More informationThis specification describes the minimum requirements for structural steel drawings.
1/7 1.0 PURPOSE This specification describes the minimum requirements for structural steel drawings. 2.0 GENERAL As stated in specification SPEC-0800, drawings are intended to be Design drawings. Sufficient
More informationListed below are the competencies required and examples from the aforementioned job:
1. Technical Analysis Instructions: Describe a project for which you collected and interpreted or analyzed technical data for development of engineering designs and drawings from concepts and specifications.
More informationCURRICULAM VITAE. Personal Information : P. Gunasekaran
CURRICULAM VITAE Objective A challenging position in an organization where my technical and analytical skills would be applied for the betterment of the organization. Personal Information Name : P. Gunasekaran
More informationBIM Services India An Architectural & Engineering Company
BIM Services India An Architectural & Engineering Company Offices Our Spread USA UK Office India Office Canada Office Australia Office JBH-Tesla Design Group, Inc. 100 Executive Boulevard-Suite #204, Ossining,
More informationFor Evaluation Only. Copyrights
xi Dedication Foreword Acknowledgments About the Author Accessing Tutorial Files Free Teaching Resources for Faculty Dimension Units and Dialog Box Captures Preface Chapter 1 - Introduction to Autodesk
More informationAKBAR BASHA Mobile: , Doha Qatar.
AKBAR BASHA Mobile:+97470631440, 97470070843. Doha Qatar. safialbaha@gmail.com safiakbar2007@yhoo.co.in CAREER SUMMARY A qualified Civil Engineer Professional having Total-13 years of experience in Qatar,
More informationStepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS
Stepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS PIPING ENGINEERING & PLANT DESIGN Chapter 1. Introduction of Piping Industry & Role of Piping Engineer 1.1.
More informationWELCOME TO CHEMIONIX. Chemionix e-solutions Pvt Ltd Mumbai India
WELCOME TO CHEMIONIX Mumbai CHEMIONIX: YOUR OUTSOURCING PATNER Companies have been outsourcing since time began. It is only recently that business processes can be outsourced across countries and continents.
More informationAdvance Steel suite 6.1 / SP2
Advance Steel suite 6.1 / SP2 This document describes only the improvements in Service Pack 2 compared to Service Pack 1. The installation of SP2 includes SP1; please see the previous document for improvements
More informationMick Hodgson. Tekla Structures, Tekla Versions And Software Evolution
Mick Hodgson 2018 Tekla Structures, Tekla Versions And Software Evolution Tekla Version 15 Main Points Unlimited Models Quick modelling tools Fast drawing production Tube CNC Tekla Version 15 Main Points
More informationAMPreVA Pressure Vessels and Heat Exchangers
AMPreVA Pressure Vessels and Heat Exchangers Pressure Vessel Modeling & Configuration 3D Production Detailed Models Layout and Fabrication Drawings Production List and Bill of Material Fabrication Operation
More informationWHO WE ARE. Our Client base. - USA - Canada - Hawaii. - Australia - New Zealand - UAE. - UK - Netherlands - Oman. - Singapore - Norway - Qatar
WHO WE ARE We help construction companies, general contractors, architects & engineers to seamlessly integrate BIM into their projects within their predefined timelines, standards and budget thereby helping
More informationPrecast Multistorey Highrise Residential & Commercial Buildings. Buildings & Factories IC
Precast Multistorey Highrise Residential & Commercial Buildings Buildings & Factories IC LARSEN & TOUBRO LIMITED It s all about Imagineering L&T at a Glance India s largest E&C company, with interests
More informationThe Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design
The Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design Instructor: Mike Jolicoeur Autodesk Lab Assistants: Sachlene Singh Autodesk Steve Schuchard PMC
More informationProven precast solutions for every application
Proven precast solutions for every application Seventy five years of UNDISPUTED LEADERSHIP HP shell roof, bowstring girders and trussed gantry girders for L&T Bengaluru Works Larsen & Toubro is a major
More information8.1 NEW FEATURES IN ADVANCE STEEL MODELING FABRICATION DRAWING. LISTS and NC FILES
/ NEW FEATURES IN ADVANCE STEEL 8.1 MODELING FABRICATION DRAWING LISTS and NC FILES TABLE OF CONTENTS Technology... 6 Technology 1: Microsoft Vista compliance... 6 Technology 2: AutoCAD 2008 compliance...
More informationFIRE STATION NO TH STREET NORTH ST. PETERSBURG, FL M-1 SCOPE OF WORK SYMBOL DESCRIPTION SYMBOL DESCRIPTION HVAC SYMBOL LEGEND
HVAC SYMBOL LEGEND HVAC PIPING AND VALVES LEGEND HVAC GENERAL NOTES SCOPE OF WORK SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION PHASING OF WORK HVAC ABBREVIATIONS ABBREVIATION
More informationDimension Below are the critical settings in AutoCAD. Other software should follow the same settings.
8.1 Drawing Standard 8.1.1 Introduction This drawing standard applies to all building drawings being prepared for the University of Calgary (UCalgary) by external consultants or vendors and internal staff
More informationmidas DShop Reinforcement Edit Function reflecting Constructability
01 Auto-generation of Structural Drawings 02 Structural drawings such as Framing plans, Sectional elevations, Beam/Column schedules, etc., are generated from the analysis & design results of midas Gen.
More informationENGINEERING SERVICES FOR CREATING PRECAST PROJECTS
ENGINEERING SERVICES FOR CREATING PRECAST PROJECTS OUR SERVICES Elematic Engineering Services offer complete engineering support for your building project. The services can also be tailored to your specific
More informationFEST Engineering Ltd. Technical Company for Engineering, Calculation and Design of Energy Facilities
FEST Engineering Ltd. Technical Company for Engineering, Calculation and Design of Energy Facilities ABOUT US In operation since 2005, first as FEST Engineering s.r.o., now FEST Engineering Ltd., was originally
More information3. Are component and cladding design pressures consistent with ASCE 7 for the wind speed and exposure category (ASCE 7 Fig. 6-3)?
Mobile County Public Works Residential Plan Reviewers Checklist For Structural Requirements of Wood Framed Residences Recommendation: Permit as Noted Revise Plans and Resubmit MCPW Ref. No. Design Criteria:
More informationAddendum to Description of Services for Building and Planning, Digital Design. The Association of of Consulting Engineers
Addendum to Description of Services for Building and Planning, 2012 8.4 Digital Design 2016 The Association of of Consulting Engineers FRI and DANSKE ARK Addendum to Description of Services for Building
More informationATTACHED PERGOLA ARBOR INSTALLATION INSTRUCTIONS
ATTACHED PERGOLA ARBOR INSTALLATION INSTRUCTIONS Recommended Tools: Before You Begin: Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers, Chalk Line Elec. Drill w/ Bits
More informationSECTION STRUCTURAL STEEL. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 051200 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationHow technology is changing the way we deliver Structural Steelwork. Brenden Picton Phil Shanks
How technology is changing the way we deliver Structural Steelwork Brenden Picton Phil Shanks Presentation Outline Project Introduction & Process Description From the Engineers Perspective From the Detailers
More informationApplied Steel Detailing Tekla Structures 11.0 Basic Training February 10, 2005
Tekla Structures 11.0 Basic Training February 10, 2005 Copyright 2005 Tekla Corporation Contents Contents...i 1...3 1.1 AutoConnections...4 1.2 General about the Criteria for Creating Connections...6 1.3
More informationCHAPTER 10 MICHIGAN DESIGN MANUAL BRIDGE DESIGN (SI) SHOP DRAWING REVIEW TYPES OF SHOP DRAWINGS Structural Steel
CHAPTER 10 SHOP DRAWING REVIEW 10.01 TYPES OF SHOP DRAWINGS 10.01.01 Structural Steel 10.01.02 Prestressed Concrete 10.01.03 Bearings 10.01.04 Metal Stay - In - Place Forms () 10.01.05 Expansion Joints
More informationEngineering Design & Power Training Institute
Engineering Design & Power Training Institute Recognition & Approvals Association of Power & Design Engineers (APDE) An ISO 9001: 2008 Certified Institute Courses P G Diploma in Piping Design & Details
More informationCarpentry/Carpenter CIP Task Grid
1 Secondary Task List 100 SAFETY/OCCUPATIONAL ORIENTATION 101 Identify and follow all basic safety practices and procedures. 102 Identify and follow all lab safety practices and procedures. 103 Identify
More informationOne-Stop Solution for Foundation Design
[Automated Foundation Engineering System] One-Stop Solution for Foundation Design Civil & Architecture Team Jbchoe@gsconst.co.kr 2006.11.02 (Automated Foundation Engineering System) Contents 1. General
More informationDOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY DWELLING
INFORMATION BULLETIN / GENERAL INFORMATION REFERENCE NO.: None DOCUMENT NO. P/GI 2014-007 Previously Issued As: P/GI 2011-007 Effective: 01-01-2014 Revised: DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY
More informationThis specification describes the minimum technical requirements for drawings, as applicable to all disciplines.
SPEC-0800 1/5 1.0 PURPOSE This specification describes the minimum technical requirements for drawings, as applicable to all disciplines. 2.0 VALE DRAWING TYPE DEFINITIONS Engineering Drawings Engineering
More informationCROSSBAR RAFTER ISOMETRIC
Super Sky Products' typical glazing system consists of glass panels or "lites" which are attached to the main framing members using extruded aluminum "retainers" or "pressure plates". These retainers are
More informationTekla 기반의 EPC 업무효율성향상 테클라코리아 / 정종훈
Tekla 기반의 EPC 업무효율성향상 테클라코리아 / 정종훈 Contents Tekla Corporation Tekla Structures 소개 Tekla Structures 적용사례 Tekla Structures 적용범위 2 Tekla Corporation 3 Tekla Corporation Model-based software for customers
More informationCHAPMAN GRIFFIN LANIER SUSSENBACH ARCHITECTS, INC. ARCHITECT S ADDENDUM NO. 06
CGLS A R C H I T E C T S CHAPMAN GRIFFIN LANIER SUSSENBACH ARCHITECTS, INC. 2500 Cumberland Parkway Suite 350 Atlanta, Georgia 30339 404.733.5493 (voice) 404.733.6804 (fax) www.cglsarchitects.com ARCHITECT
More informationSAI ROOF SAI ROLL SAI ROLL FORMS INDIA PVT. LTD.
FORMS INDIA PVT. LTD. INTRODUCTION We at " FORMS INDIA PVT LTD." are committed towards quality products to our valuable customers in domestic as well as International market. Our Vision is to be a globally
More information7.1. NEW FEATURES IN Advance Steel MODELING FABRICATION DRAWING. LISTS and NC FILES
/ NEW FEATURES IN Advance Steel 7.1 MODELING FABRICATION DRAWING LISTS and NC FILES TABLE OF CONTENTS Technology... 5 Technology 1: Unicode compatibility... 5 Technology 2: Unique ID for synchronization...
More informationDOCUMENT SUBMITTAL REQUIREMENTS FOR AN ALTERATION OR ADDITION TO AN EXISTING SINGLE-FAMILY DWELLING OR MULTI-FAMILY DWELLING
INFORMATION BULLETIN / PUBLIC - GENERAL INFORMATION REFERENCE NO.: Effective: 10-01-99 DOCUMENT NO. P/GI 2002-008 Revised: 11-01-02 Previously Issued As: IB ST-4 DOCUMENT SUBMITTAL REQUIREMENTS FOR AN
More informationSupervisor s Checklist (Handling/Installation/Inspection of Roof Framing)
Supervisor s Checklist (Handling/Installation/Inspection of Roof Framing) Development Regulations 2008 Notice pursuant to Regulation 74 of the Development Act 1993 Development Application Number: Address
More informationAuto-drafting Module for midas Gen MIDAS Information Technology Co., Ltd.
MIDAS Information Technology Co., Ltd. 01 Introduction midas DShop empowers engineers to streamline the design process all the way to generating engineering drawings. midas DShop imports models complete
More informationHow to Estimate the Cost of a. Precast Concrete Parking Structure
How to Estimate the Cost of a Precast Concrete Parking Structure 1 TABLE OF CONTENTS 1. INTRODUCTION 2. TYPES AND METHODS OF MEASUREMENT 3. SPECIFIC FACTORS THAT MAY AFFECT TAKE OFF AND PRICING 4. OVERVIEW
More informationIMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS
IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS ** READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING!** If at any point, you have questions, call 1-800-851-0865...(The manufacturer will not be responsible
More informationManufacturer & Exporter of C.I Casting and Machine Tools
Manufacturer & Exporter of C.I Casting and Machine Tools Floor Plates Surface Plates Angle Plates Welding Plates Modernized state of an art C.I Foundry Capacity of around 400 MT per Month Single pc casting
More informationADDENDUM NO. TWO. To the Plans and Specifications for: PALM COAST READINESS CENTER PALM COAST, FL For FLORIDA DEPT. OF MILITARY AFFAIRS
ADDENDUM NO. TWO To the Plans and Specifications for: PALM COAST READINESS CENTER PALM COAST, FL For FLORIDA DEPT. OF MILITARY AFFAIRS Prepared By: ARCHITECT Bhide & Hall Architects, P.A. 1329-C Kingsley
More information1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. B. See Division 5 Section "Pipe and Tube Railings"
More informationTCN 01. Page No. 1 of 2 Ref: PSER:SCT:ABJ:T1178:TCN-01 Date:
TCN 01 Page No. 1 of 2 Ref: PSER:SCT:ABJ:T1178:TCN-01 Date: 21-02-2011 Sub Tender Change Notice (TCN- 01). Job Identification & Receipt of materials, Erection, Testing, Commissioning, Handing over etc
More informationSr.MECHANICAL DRAFTSMAN (MEP) - RESUME
Sr.MECHANICAL DRAFTSMAN (MEP) - RESUME A.C.ANBUSELVAN Mobile No.: +974 33261821 #30A MALAYAPPAN SALAI, Email: sivaselvan_2002@yahoo.com KAMARAJ COLONY, THURAIYUR-621010, TRICHY (DT). TAMILNADU-INDIA. Professional
More informationSECTION D BIM COORDINATION DRAWINGS - CONTRACTORS
END OF SECTION 01 30 00 SECTION 01 31 21-3D BIM COORDINATION DRAWINGS - CONTRACTORS PART 1 - GENERAL 1.01 RELATED DOCUMENTS Attention is directed to Bidding and Contract Requirements, and to Division 1,
More informationSTRUCTURAL WOOD DETAILING IN CAD FORMAT
STRUCTURAL WOOD DETAILING IN CAD FORMAT STRUCTURAL WOOD DETAILING IN CAD FORMAT K.A. ZAVAT lnm51springer Science+Business ~---Media, LLC Copyright 1993 by Springer Science+Business Media New York Originally
More informationDOCUMENT ADDENDUM NO. 4. Issued to all Bidders: Date: October 14, Contract Name: Electrical Installation. Contract Number: C8410
DOCUMENT 009104 - ADDENDUM NO. 4 Issued to all Bidders: Date: October 14, 2015 Contract Name: Electrical Installation Contract Number: C8410 This addendum forms a part of the Bid described above. The original
More informationADMINISTRATION DEPARTMENT Plant Management Division. An Inventory of Its State Office Building Drawings
MINNESOTA HISTORICAL SOCIETY Minnesota State Archives ADMINISTRATION DEPARTMENT Plant Management Division An Inventory of Its State Office Building Drawings OVERVIEW OF THE RECORDS Agency: Minnesota. Dept.
More informationAPPLICATION FORM FOR INFRASTRUCTURE NOC
APPLICATION FORM FOR INFRASTRUCTURE NOC Submission Type New Resubmission (Previous Reference No): Arch. Str. HVAC EHS Others Revision /Amendment (Infrastructure NOC Reference No): Arch. Str. HVAC EHS Others
More informationOVERVIEW DRAFTING & CONSULTING ENGINEERS
OVERVIEW We Are Pleased To Introduce Ourselves As One Of The Leading Engineering Drafting Services. We Are In Services Of Auto-Cad Designing & Drafting Since Last Ten Years. R-CAD Is An Organization With
More informationFraming Tech 1
Western Technical College 31410366 Framing Tech 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3.00 Total Hours 108.00 This course introduces the
More informationHorizontal Connection System
Horizontal Connection System Shrikant M Kanitkar, Subsea Piping Engineer, AkerSolutions ABSTRACT The emerging oil and gas business in India and the need of the hydrocarbon products with energy hungry India
More informationRole of BIM. in Plumbing System -K Chandrakanth and M Vinay Kumar. Abstract. 3 Dimension. Introduction: Collaborative Design:
Role of BIM in Plumbing System -K Chandrakanth and M Vinay Kumar Abstract As we look at the plumbing industry, especially in the building sector from design stage to operation & maintenance, huge amount
More informationHaving the highest regards for a fore mentioned institution and with my
Dear Sir, Having the highest regards for a fore mentioned institution and with my sincere aspiration to obtain a working position and earn a living, I humbly seek in your good office for a working position
More informationwww.cad-designers.com Staffing Services Cad Designers is an established staffing company that specializes in providing professional support for the A/E/C industry. All candidates are screened with a complete
More informationOUR CLIENT BASE. Canada Norway. UAE Singapore. Germany. Netherlands USA. Hawaii. Australia. Qatar Oman. Belgium. New Zealand.
WHOWE ARE We help construction companies, general contractors, architects & engineers, integrate BIM into their projects seamlessly within their predefined timelines and budget, bridging the gap between
More informationSILVERBACK INSTALLATION MANUAL
SILVERBACK INSTALLATION MANUAL R-SERIES SOLAR RACKS T OLL FREE 866-766-3727 WWW.ROOFSCREEN.COM Introduction... 2 The Silverback Solar Racking System... 2 This manual... 2 Application... 2 System Overview...
More informationPDMS INFORMATION BOOKLET. Date: 15/08/2013 SEPC
PDMS INFORMATION BOOKLET Date: 15/08/2013 OTHER SERVICES ON OFFER BY PIPING STRESS ANALYSIS USING CEASER II EQUIPMENT DESIGN USING PV ELITE ISOMETRIC & P&ID IN AUTOCAD version 2012 MATERIAL INSPECTION
More informationHall of Waters List of Historic Drawings
List of Historic Drawings The following represents the historic drawings of the PROJECT PWA PROJECT NUMBER JOB NUMBER SHEET NUMBER SHEET TITLE DATE NOTES 1935 Drawing Piping Layout at Tank Room for Mineral
More informationMechanical Design. Brian Brinson Mechanical Design Manager.
Mechanical Design Brian Brinson Mechanical Design Manager brian.brinson@spx.com September 26, 2018 Agenda 1. Design Process 2. Pre-Approval Drawings Bid Drawings Preliminary Drawings 3. Approval Package
More informationThis specification describes the general requirements for Engineering Services provided to Vale.
1/9 1.0 PURPOSE This specification describes the general requirements for Engineering Services provided to Vale. 2.0 GENERAL For the purposes of this document, the Engineering Consultant shall be referred
More informationAdvance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
More informationAcceptable Standards of Domestic Construction
Truss or Rafter Roof Batten Triple grip fastener (for roof trusses) Foil lined Insulation blanket Top plate Sprocket Brick tie Top plate strapping at 1200mm max. cts. Note: Holding down straps should be
More informationMTJ Outdoor Baggage Claim
MTJ Outdoor Baggage Claim 915 S. Tenth St. Montrose, CO 8101 p: (970) 29-1980 f: (970) 797-6811 www.motleyarc.com Drawings and Dimensions 1. ATTENTION ALL USERS OF THESE DRAWINGS, GENERAL CONTRACTORS,
More informationBUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT
BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationSECTION CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP
1 1 1 0 1 0 1 0 1 SECTION 1 1 CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP BASED ON DFD MASTER SPECIFICATION DATED /01/ P A R T 1 - G E N E R A L SCOPE The work under this section shall consist of
More informationSingle-Family Dwelling Submittal Requirements
Single-Family Dwelling Submittal Requirements The purpose of this guideline is to assist our customers in preparing for plan submittal. The items listed must be included before your plans can be accepted
More informationSECTION: 15 ZONING RULE LOT AREA 6134 S.F S.F. BUILDING AREA (FOOTPRINT) LOT COVERAGE 20.2% 24.86' FRONT YARD SIDE YARD 8.
PROPOSED 1ST FLOOR PROPOSED 2ND FLOOR Anthony Hatziioannou Architect, P.C. EXISTING 1ST FLOOR ZONING CALCULATION JURISDICTION: TOWN OF OYSTER BAY SECTION: 15 BLOCK: 71 LOT: ZONE: RESIDENCE R1-7 PERMITTED
More informationClopay Models 835/837 Sliding Door System Installation Guide
Clopay Models 835/837 Sliding Door System Installation Guide The aim of this instruction is to guide you through the process of construction and fitting of Sliding Doors. Due to the number of sizes available
More informationEstablished : Year 2010 ISO 9001:2008 & ISO Certified Company.
Established : Year 2010 ISO 9001:2008 & ISO 14001 Certified Company. JNJ Machines Pvt. Ltd. EXPERTISE IN CRITICAL MACHINING & FABRICATION The Founder Mr. R.K. Jain THE UNIT - Hazira Works Units, 20 kms
More informationCONTENTS TABLE OF. Introduction. Company Details. Organization Chart. Certificates & Insurances. Our Products. List of machineries and Equipment
TABLE OF CONTENTS Introduction... 01 Company Details... 02 Organization Chart... 04 Certificates & Insurances... 05 Our Products... 10 List of machineries and Equipment... 31 Other Companies of Group...
More informationTABLE OF CONTENTS. INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6
TABLE OF CONTENTS INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6 INSTALLATION...7 System requirements...7 Starting the installation...7 STARTING ADVANCE
More information14000 Series. Fabrication and Installation Instructions
14000 Series Fabrication and Installation Instructions Revision May 2013 Table of Contents GENERAL CONSTRUCTION NOTES...3 EXTRUDED ALUMINUM PARTS...5 ACCESSORIES...8 OVERVIEW...10 FRAME FABRICATION...15
More informationMEC-D-E-2004 Mechanical Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS
103020-MEC-D-E-2004 Mechanical Engineer Holds a B. Sc. in Mechanical Production / Design Engineering and has about 12 years hands-on experience in Mechanical Production / Manufacturing / Automation / CNC
More informationMANuFACturers industry QuALity statement.
MANuFACturers industry QuALity statement Precast New Zealand Inc. (PCNZ) was established in 1999 and is a national industry association of precast concrete manufacturers representing over 90% of the off
More informationSECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationDrawing Module, Import-Export
Drawing Module, Import-Export construction modelling systems www.comosys.com Save Time & Money In the engineering & design business one of the biggest issues is man-hours. How to get work done quickly
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationINDIAN INSTITUTE OF TECHNOLOGY DEPARTMENT OF CIVIL ENGINEERING
INDIAN INSTITUTE OF TECHNOLOGY DEPARTMENT OF CIVIL ENGINEERING Enquiry letter for Engineering Services Consultancy for National Aerosol Facility at IIT Kanpur Sub: Quotation for Scope of the work and technical
More informationSeptember 6, 2018 CITY OF BERKELEY SHATTUCK RECONFIGURATION AND PEDESTRIAN SAFETY PROJECT SPECIFICATION NO C ADDENDUM NO.
Department of Public Works Transportation Division September 6, 2018 CITY OF BERKELEY SHATTUCK RECONFIGURATION AND PEDESTRIAN SAFETY PROJECT SPECIFICATION NO. 17-11090-C ADDENDUM NO. 3 Dear Bidder: The
More informationIRONWORKS Shelters Reminiscent of Riveted Iron and Steel Structures
IRONWORKS Shelters Reminiscent of Riveted Iron and Steel Structures 1455 Lincoln Avenue Holland, Michigan 49423 (800) 748-0985 www.iconshelters.com IRONWORKS These shelters and other products are designed
More informationQueenslanders. Design + Documentation. A presentation on the structural elements in the style and how to document. Peter Latemore
Queenslanders Design + Documentation A presentation on the structural elements in the style and how to document BrownStower House Bardon 1920 s Peter Latemore Heritage Building Designer Brief History Origins
More informationPrecast Concrete Industry Extensions for Autodesk Revit Structure 2014
Precast Concrete Industry Extensions for Autodesk Revit Structure 2014 Reinhard Lackner Managing Director - IDAT Join us on Twitter: #AU2013 Class summary This class shows how extensions to Autodesk Revit
More informationCEILING-MOUNTED MONORAIL ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual
CEILING-MOUNTED MONORAIL ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual This manual is for various mounting types and plain and trussed track profiles. ISO 9001:2008 Registered Manual 103-0075
More informationResidential Room Addition / Remodel Submittal Requirement Checklist
City of Elko Building Department 1753 College Avenue Elko, Nevada 89801 (775) 777-7220 fax (775) 777-7229 Residential Room Addition / Remodel Submittal Requirement Checklist TWO COMPLETE SETS OF PROPERLY
More information