Exploded View Extracting Drawings. ENGR 1182 SolidWorks 08
|
|
|
- Eugenia James
- 6 years ago
- Views:
Transcription
1 Exploded View Extracting Drawings ENGR 1182 SolidWorks 08
2 Today s Objectives Formal Drawing Components: Exploded View Extracted Drawings SW07 In-Class Activity SW07 Out-of-Class Homework Assignment
3 Formal Drawings Definition: First page of a Working Drawing Set Later in SW-10 Formal Drawing Components: 1. Extracted Drawings Exploded View Bill of Materials Balloons Later in SW-10
4 Formal Drawings Definition: Detailed multiview representations of a finished part Formal Drawing Components: 1. Extracted Drawings Extracted Views Detailed Features Title Block
5 Exploded View ENGR 1182 SolidWorks 08
6 Converting an Assembly into an Exploded View
7 Converting an Assembly into an Exploded View 1. After creating a properly constrained assembly drawing, select Assembly/Exploded View 2. Note the Instructions in the upper pane of the drop down table 3.
8 Converting an Assembly into an Exploded View 4. By holding the CTRL key down and left clicking on each part, select the two parts (Propeller and Generator) which are to be moved vertically to separate them from the Base and the Tower. The selection turns the parts BLUE. 5. Note that the arrow controlling the vertical movement is GREEN since is has not yet been selected.
9 Converting an Assembly into an Exploded View 6. Select the vertical arrow by left clicking on it WITHOUT releasing the mouse button. Note that the color changes to ORANGE indicating selection. 7. With the mouse button depressed, pull the selected parts upward as indicated. Release the mouse button to lock the parts in the desired position.
10 Converting an Assembly into an Exploded View 8. Repeat the procedure to adjust the position of the Tower. 9. After the tower has been locked in position, accept the Exploded View by clicking on the green arrow. The Exploded View can now be saved and later Extracted into a Drawing as described in the following slides.
11 Extracting an Exploded View A SolidWorks Implementation of a Working Drawing Warning: if while exploding an assembly, you make a mistake and reset your drawing to the assembled state by clicking on Exploded View and start again, SolidWorks records that initial mistake as ExplView1. When you extract the exploded view into a drawing, chose the correct ExplView!
12 Extracting Drawings ENGR 1182 SolidWorks 08
13 Extracted Views Purpose: create 2D engineering drawings from solid models Part File to Drawing File Place Base View For Multiview drawings: Project Top, Right Isometric View For Exploded Views, usually only the shaded Isometric is used Top View Base View Isometric View Right View
14 Detailed Features Automatically Aligned Features Hidden Lines Orthographic Views NOT on Isometric Views (unless necessary) Circular Features Centerlines Centermarks
15 Title Block Specific to Company Part Name Scale Units Author Date Any Other Necessary Information
16 SolidWorks: OSU Title Block A pre-made drawing sheet with an OSU title block is found on the website under content. Download this file and file out your name, instructor, etc. and save the file as: OSU_TitleBlock_Initials Open this file and always use Save As in order to keep the file for repeated use.
17 SolidWorks: Drawing File Open a new Drawing file and use the Model View button to place a base view Select the correct part file from open documents or using the Browse.. button to select closed files
18 SolidWorks: Model View Options Choose base view (usually front view) Display hidden lines for orthographic views Choose appropriate scale using the sheet scale or a custom option
19 SolidWorks: Extracted Views Insert base view by left clicking once at the correct location Place projected views by left clicking in the appropriate directions and spacing Press Esc when finished
20 SolidWorks: Changing Options The size of all the views can be changed by selecting the base view and changing the scale The isometric view can be selected in order to change it s display properties to a solid part without edge lines
21 SolidWorks: Circular Features Center Marks and Centerlines must be added to define circular features in Orthographic views
22 SolidWorks: Title Block Finished Drawing Right click and select Edit Sheet Format Note: The views in the main space will disappear When finished right click and select Edit Sheet to see the views of the object again Double click text to edit
23 Extracting Drawing Wrap Up Extracted Views Part file to drawing file Detailed Features Aligned Hidden Circular Title Block Author Units Scale Homework Assignment SW07-OUT: Extract an Exploded View of OSU Phone (SW-06)
24 Important Takeaways Extracted drawings are used to show 3D parts as 2D drawings or to create an Exploded View as part of a set of Working Drawing. see SW-10 Titles blocks are used for identification and informative purposes..
25 What s Next? Due Next Class: SW07 Out of Class HW Before next class, you will read about dimensioning in detail. Take SolidWorks 8 Quiz
Exploded View Extracting Drawings. ENGR 1182 SolidWorks 08
Exploded View Extracting Drawings ENGR 1182 SolidWorks 08 Today s Objectives Formal Drawing Components: Exploded View Extracted Drawings SW07 Activity SW07 Application Formal Drawings Definition: First
Upcoming Events This Week : LPQ
Upcoming Events This Week : LPQ Extracting Drawings - DEMO Although most demos are implemented with word documents, this demo employs slides so that more details can be shown to the students as the drawing
Extracting Drawings - DEMO
Extracting Drawings - DEMO Although most demos are implemented with word documents, this demo employs slides so that more details can be shown to the students as the drawing is constructed. College of
Student + Instructor:
DRAFT OF DEMO FOR The following set of instructions are an optional replacement for the Section Views in SolidWorks. This demo should help prepare the students for the Out of Class HW Student + Instructor:
1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define.
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Control + Click HERE to view enlarged IMAGE and Construction Strategy he following set of
Dimensioning part 1 with SolidWorks. ENGR 1182 SolidWorks 08
Dimensioning part 1 with SolidWorks ENGR 1182 SolidWorks 08 Today s Objectives Formal Drawing Components: Dimensioning with SolidWorks SW08 Activity SW08 Application Formal Drawings Definition: Detailed
Dimensioning with SolidWorks - Demo
Dimensioning with SolidWorks - Demo Although most demos are implemented with word documents, this demo employs slides so that more details can be shown to the students as the drawing is constructed. Part
Student + Instructor:
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Show 01 Solid Modeling Intro slides quickly. SolidWorks Layout slides are on EEIC for reference
Design Intent. ENGR 1182 SolidWorks 4
Design Intent ENGR 1182 SolidWorks 4 Today s Objectives Design Intent Fully Defined Design Analysis SW04 In-Class Activity Fully Defining a Profile Starbucks Coffee Cup Analysis SW04 Out-of-Class Homework
8 Working Drawings in AutoCAD
8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of
Anchor Block Draft Tutorial
Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views
Certified SOLIDWORKS Professional Advanced Preparation Materials
Includes Preparation for Five Advanced Certification Exams Certified SOLIDWORKS Professional Advanced Preparation Materials Sheet Metal, Weldments, Surfacing, Mold Tools and Drawing Tools SOLIDWORKS 2016
Quick Start for Autodesk Inventor
Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow
Assignment 12 CAD Mechanical Part 2
Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden
Assembly Receiver/Hitch/Ball/Pin to use for CAD LAB 5A and 5B:
MECH 130 CAD LAB 5 SPRING 2017 due Friday, April 21, 2016 at 4:30 PM All of LAB 5 s hardcopies will be working drawing layouts. Do not print out from the part file. We will be using the ME130DRAW drawing
Toothbrush Holder. A drawing of the sheet metal part will also be created.
Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit
ENGR 1182 Midterm Exam 1: Study Guide and Practice Problems
ENGR 1182 Midterm Exam 1: Study Guide and Practice Problems Disclaimer Problems seen in this study guide may resemble problems relating mainly to the pertinent homework assignments. Reading this study
Engineering Design with
Engineering Design with SOLIDWORKS 2016 and Video Instruction A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard, CSWP, SOLIDWORKS Accredited Educator SDC PUBLICATIONS
Engineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry
2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply
ENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems
Spring Semester 2016 ENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems Disclaimer Problems in this study guide resemble problems relating mainly to the pertinent homework assignments.
AUTODESK INVENTOR Trial Projects
AUTODESK INVENTOR Trial Projects Drawing Creation Create detailed drawings of a collar flange PART 1: CREATING DRAWING VIEWS page: 2 1. 2. 3. Start by clicking the Projects icon in the ribbon. Navigate
SOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
Feature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05
Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05 Today s Objectives Feature-Based Modeling (comprised of 2 sections as shown below) 1. Breaking it down into features Creating
Chapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder
Inventor (10) Module 1E: 1E- 1 Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder In this Module, we will explore the topic
and Engineering Graphics
SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
Modeling an Airframe Tutorial
EAA SOLIDWORKS University p 1/11 Difficulty: Intermediate Time: 1 hour As an Intermediate Tutorial, it is assumed that you have completed the Quick Start Tutorial and know how to sketch in 2D and 3D. If
Introduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1
AEROPLANE Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Aeroplane Assembly The part files for this assembly are saved in the folder titled Aeroplane. Open an
To start a new drawing Select File New then from the dialog box, which appears select Normal.dft followed by OK.
Draft Tutorial This tutorial provides step-by-step instructions for the detailing of a drawing of the anchor block shown opposite. As you create this drawing, you will use the following drafting techniques:
Assembly Drawings. Definition; Description
Assembly Drawings Definition; Description Assembly drawings show how individual parts fit together to make a machine. An assembly drawing is a drawing of an entire machine or system with all of its components
SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
Introduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
Ball Valve Assembly. On completion of the assembly, we will create the exploded view as shown on the right.
Ball Valve Assembly Supplied are the main components of a ball valve. In this exercise you will assemble the valve as shown below Left. (N.B. Socket head cap screws are not supplied these will be created
Starting a 3D Modeling Part File
1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce
g. Click once on the left vertical line of the rectangle.
This drawing will require you to a model of a truck as a Solidworks Part. Please be sure to read the directions carefully before constructing the truck in Solidworks. Before submitting you will be required
AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.
AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and
Converting a 3D object into a mould. With Tinkercad and Inkscape
Converting a 3D object into a mould With Tinkercad and Inkscape What you need Tinkercad Inkscape a STL file to convert Create an account now Download for free now Pick up one for free now To make better
Foreword. If you have any questions about these tutorials, drop your mail to
Foreword The main objective of these tutorials is to give you a kick start using Solidworks. The approach to write this tutorial is based on what is the most important knowledge you should know and what
CAD and Drafting Standards Working Drawings
CAD and Drafting Standards Working Drawings Gregory Mocko Introduction 2 The purpose of drawing or generating a CAD document is to communicate Essentially, since communication is the goal, some standards
Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)
Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model
User Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
Tenviewing a Solid. In this chapter, we will learn the following to World Class standards:
C h a p t e r 15 Tenviewing a Solid In this chapter, we will learn the following to World Class standards: Converting 3D Solids to 2D Orthographic Views Opening the Solid Part Drawing Loading Tenview.LSP
Activity 1.5.5a Pegboard Toy Working Drawings
Activity 1.5.5a Pegboard Toy Working Drawings Introduction Having the ability to take something that you have designed and create a 3D model of it is exciting and fun to do. In the last activity, you made
Recording your Voice Tutorials 2 - Setting the Computer Setting Audacity Wayne B. Dickerson
Recording your Voice Tutorials 2 - Setting the Computer Setting Audacity Wayne B. Dickerson In this tutorial we want to insure that your computer and Audacity will do the best recording job they can do
Working With Drawing Views-I
Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined
Creating a 2D Drawing in Paper Space
C h a p t e r 16 Creating a 2D Drawing in Paper Space In this chapter, we will learn the following to World Class standards: 1. Converting 3D Solids to 2D Orthographic Views 2. Open the Solid Part Drawing
Engineering & Computer Graphics Workbook Using SolidWorks 2014
Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
1. Respect yourself, your associates, and your school.
Classroom rules Tuesday, August 30, 2011 2:16 PM Rules 1. Respect yourself, your associates, and your school. 2. Enter the room, be seated, and check the board before the bell rings. 3. 4. 5. 6. 7. Eyes
Evaluation Chapter by CADArtifex
The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching
Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge
Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored
Engineering & Computer Graphics Workbook Using SOLIDWORKS
Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
Generative Drafting (ISO)
CATIA Training Foils Generative Drafting (ISO) Version 5 Release 8 January 2002 EDU-CAT-E-GDRI-FF-V5R8 1 Table of Contents (1/2) 1. Introduction to Generative Drafting Generative Drafting Workbench Presentation
SolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
Orthographic Projection
ENG3000 Orthographic Projection 1 Session Objectives To understand the basic principles of orthographic projection To be able to construct orthographic views of simple objects To visualize 3 D objects
Activity 2.4 Multi-view Sketching
Activity 2.4 Multi-view Sketching Introduction It s a very common occurrence to see a product advertisement and think, I thought of an idea for something like that just a few months ago. People spend a
Revit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
Revit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
Isometric Drawings. Figure A 1
A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an
Product Modelling in Solid Works
Product Modelling in Solid Works In the following exercise you will use solid works to construct the computer mouse shown opposite. In this exercise you will use a number of advanced features to achieve
Pro/E WILDFIRE, week6
Pro/E WILDFIRE, week6 1. Set working directory 2. File>New>Name is lbrack 3. When you create the part, make sure that the back surface of the vertical plate is on the front datum plane, and the lower surface
AutoCAD Inventor - Solid Modeling, Stress and Dynamic Analysis
PDHonline Course G280 (15 PDH) AutoCAD Inventor - Solid Modeling, Stress and Dynamic Analysis Instructor: John R. Andrew, P.E. 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
Shaft Hanger - SolidWorks
ME-430 INTRODUCTION TO COMPUTER AIDED DESIGN Shaft Hanger - SolidWorks BY: DR. HERLI SURJANHATA ASSIGNMENT Submit TWO isometric views of the Shaft Hanger with your report, 1. Shaded view of the trimetric
Lecture #4 MULTIVIEW PROJECTION RES 112E COMPUTER AIDED TECHNICAL DRAWING ITU
Lecture #4 MULTIVIEW PROJECTION This week You will learn multi-view projection. The steps to follow are: Projections (ISO-E & ISO-A) Multi-view drawings Views (Basic,Auxiliary, Detailed etc.) Sketching
Principles and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation
Technological Design Mr. Wadowski. Orthographic & Isometric Drawing Lesson
Technological Design Mr. Wadowski Orthographic & Isometric Drawing Lesson TOPICS Working Drawings, Isometric Drawings & Orthographic Drawings Glass box concept Multiview projection Orthographic projection
Hydro Hull. Chapter 21. Boat. A. Save as "HYDRO". Step 1. Open your HULL MID PLANE file (Chapter 2).
Chapter 21 Boat Hydro Hull A. Save as "HYDRO". Step 1. Open your HULL MID PLANE file (Chapter 2). Step 2. Click File Menu > Save As. Step 3. Key-in HYDRO for the filename and press ENTER. B. Delete Loft1,
Drawing and Detailing
Drawing and Detailing with SolidWorks 2007 By David C. Planchard and Marie P. Planchard Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices SDC PUBLICATIONS Schroff Development
AutoDesk Inventor: Creating Working Drawings
AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working
Autodesk Inventor. In Engineering Design & Drafting. By Edward Locke
Autodesk Inventor In Engineering Design & Drafting By Edward Locke Engineering Design Drafting Essentials Working Drawings: Orthographic Projection Views (multi-view, auxiliary view, details and sections)
Tutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
uiulearn TUTORIAL INTEGRATIONS> HOW TO USE PANOPTO (STUDENT)
uiulearn TUTORIAL INTEGRATIONS> HOW TO USE PANOPTO (STUDENT) This tutorial covers how to record a Panopto video for your course. IN ORDER TO DO THIS, YOUR INSTRUCTOR MUST COMPLETE SEVERAL STEPS TO ALLOW
At the conclusion of this unit you should be able to accomplish the following with a 70% accuracy
7 Multiview Drawing OBJECTIVES At the conclusion of this unit you should be able to accomplish the following with a 70% accuracy 1. explain the importance of mulitview drawing as a communication tool far
AutoCAD 2D. Table of Contents. Lesson 1 Getting Started
AutoCAD 2D Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
ORTHOGRAPHIC PROJECTIONS. Ms. Sicola
ORTHOGRAPHIC PROJECTIONS Ms. Sicola Objectives List the six principal views of projection Sketch the top, front and right-side views of an object with normal, inclined, and oblique surfaces Objectives
Advance Dimensioning and Base Feature Options
Chapter 4 Advance Dimensioning and Base Feature Options Learning Objectives After completing this chapter you will be able to: Dimension the sketch using the autodimension sketch tool. Dimension the sketch
Tutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
SolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects SolidWorks 2005 Tutorial and MultiMedia CD A Step-by-step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard
SDC. SolidWorks Tutorial 2001Plus. A Competency Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.
2001Plus A Competency Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com Project 2 Below are the desired
Revit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
Parametric Design 1
Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students
Lesson 4 Extrusions OBJECTIVES. Extrusions
Lesson 4 Extrusions Figure 4.1 Clamp OBJECTIVES Create a feature using an Extruded protrusion Understand Setup and Environment settings Define and set a Material type Create and use Datum features Sketch
DRAFT Solid Edge ST4 Update Training Draft
DRAFT Solid Edge ST4 Update Training Draft Presented by: Steve Webb Topics Parts List Table Titles Column Headers Headers Merging Header Rotate Cell Aspect Ratio Cell Formatting Overriding Disabled Cells
GO! with Microsoft PowerPoint 2016 Comprehensive
GO! with Microsoft PowerPoint 2016 Comprehensive First Edition Chapter 2 Formatting PowerPoint Presentations Learning Objectives Format Numbered and Bulleted Lists Insert Online Pictures Insert Text Boxes
Brief Introduction to Engineering Graphics The use of drawings to convey information. Sketching freehand straight edge
Brief Introduction to Engineering Graphics The use of drawings to convey information. Sketching freehand straight edge CAD drawings 2D drafting 3D model to 2D drawings 1 Different Graphical Representation
1. Respect yourself, your associates, and your school.
Classroom rules Tuesday, August 30, 2011 2:16 PM Rules 1. Respect yourself, your associates, and your school. 2. Enter the room, be seated, and check the board before the bell rings. 3. 4. 5. 6. 7. Eyes
Advance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
Introducing SolidWorks
Introducing SolidWorks SAAST Robotics 2008 SolidWorks Software Visually-based 3-D Mechanical design software Engineers and Designers use it to: Quickly sketch out ideas Experiment with features, dimensions
Solidworks tutorial. 3d sketch project. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.
Solidworks tutorial 3d sketch project A u t h o r : M. G h a s e m i C o n t a c t u s : i n f o @ s o l i d w o r k s a d v i s o r. c o m we will create this frame during the tutorial : In this tutorial
Copyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material
ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2005 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
< Then click on this icon on the vertical tool bar that pops up on the left side.
Pipe Cavity Tutorial Introduction The CADMAX Solid Master Tutorial is a great way to learn about the benefits of feature-based parametric solid modeling with CADMAX. We have assembled several typical parts
Copyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material
ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2008 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better
Autodesk AutoCAD Architecture 2015 Fundamentals
Autodesk AutoCAD Architecture 2015 Fundamentals Elise Moss SDC P U B L I C AT I O N S Authorized Author Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
Vectorworks / MiniCAD Tutorials
Vectorworks / MiniCAD Tutorials Tutorial 1: Construct a simple model of a little house Tutorial 2: Construct a 4 view Orthographic drawing of the Model These tutorials are available as Adobe Acrobat 4
Engineering Design. with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects Engineering Design with SolidWorks 2010 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling Introductory Level
SOLIDWORKS 2018 Basic Tools
SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
Drawing and Detailing with SolidWorks 2014
r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices