DRAFT Solid Edge ST4 Update Training Draft

Size: px
Start display at page:

Download "DRAFT Solid Edge ST4 Update Training Draft"

Transcription

1 DRAFT Solid Edge ST4 Update Training Draft Presented by: Steve Webb

2 Topics Parts List Table Titles Column Headers Headers Merging Header Rotate Cell Aspect Ratio Cell Formatting Overriding Disabled Cells Inserting User Defined Rows Convert Deleted Parts/Assemblies to User Defined Rows Display Control through Configuration Merge Vertical Cells with Same Value Page 2

3 Topics Drawing Views Captions Delete Display while dragging Fixed Position Break Lines Section Views Ribs Sheet Scale Dimensions Drawing View Style Annotations Symbols Auto balloon Fastener Systems Callout Aspect Ratio Feature Control Frame Text Box Page 3

4 Topics Reattach Centerline Reattach Center marks Page 4

5 Parts List Table Titles With ST4, users have the ability to control Fonts, Alignment and Autoadjust aspect ratio to fit title width for Parts List Title Alignment Left Center Right Indent Adjust text to title width - when the length of the title exceeds the cell width, the aspect ratio (ratio of the width of the image to its height) of the title text automatically adjusts to fit the cell width Page 5

6 Parts List Table Titles Options Font adjusts the font of the title text Font style adjusts the font style of the title text Font size adjusts the size of the text Underline underline title text Page 6

7 Parts List Column Headers Column Header implemented for all tables (Table, Parts List, FOP Table and Bend Table) Show headers When checked, all header cells will display Position All header cells move together Header Footer Both Neither Fixed header row height the column header cells are a fixed height and are not derived from the text height Page 7

8 Parts List Column Headers Multiple Column Header Rows Show two rows the header of the specified column will have two independent cells for the header Row number - which row in the column header the properties are being applied Format Table Cells - displays the Format Table Cells dialog allowing the user to control the alignment and orientation Page 8

9 Parts List Headers Merging Fixed data row height - column header cells are fixed height and not derived from the text height Merge with next header - merges vertical cells with same value. Column header cell is to be merged with the header cell adjacent to the right Page 9

10 Parts List Header Rotate Header Orientation Horizontal default horizontal display of the text Rotated rotates the header text 90 degrees counterclockwise Vertical displays each character in the header vertically one after another on separate text lines When the column header is rotated, the rotation is 90 degrees counterclockwise Justification still applies to the text in the cell Page 10

11 Parts List Table Styles Controlling Table styles The line style between the two cells is controlled by the Header Separator in the table style Header-Data Separator Header Separator Page 11

12 Parts List Cell Aspect Ratio Cells in tables have been enhanced so that the text within each cell adjusts the aspect ratio of the text to fit within the column width Change the Header Select column, Format Cells, Adjust text to column width Change Data Select column, Format Cells, Adjust text to column text Page 12

13 Parts List Data User can now control Font for any cell Bold fonts Italic fonts Underline font Justification Page 13

14 Parts List Overriding Disabled Cells Disabled cells may be enabled for user override of the derived cell text Allow Cell Overrides Enables the selected cells of defined columns so that the values may be changed Any changes to the original properties are not be reflected in the cells Clear Cell Overrides Sets the value of the cells back to the property text derived values Page 14

15 Parts List Inserting User Defined Rows Inserting blank rows into derived tables (Parts List, Bend Table, and FOP table) Rows may be inserted anywhere in a derived table Sorting applies to the data displayed in the blank row If inserted row is blank and sorting is enabled, the row may move because of the blank data in a sorted column Page 15

16 Parts List Convert Deleted Parts/Assemblies to User Defined Rows When a part or assembly is deleted, the parts list is updated to make that row user defined, instead of removing rows when parts and/or subassemblies are removed from the assembly The item number for the converted row remains If disabled the rows are deleted when the parts list is updated Page 16

17 Parts List Display Control through Configuration Parts list display is based on a configuration, model view, or zone Configuration is used to define what is displayed in the parts list The Configuration combo box is disabled and ignored when Exploded list is selected Page 17

18 Parts List Merge Vertical Cells with Same Value Merge adjacent vertical cells in a column into a single cell All tables (Parts List, FOP Table, and Bend Table) Formatting options Horizontal alignment Left, Center, Right, Indent Vertical alignment Top, Center, Bottom DEMO 1 Page 18

19 Drawing View Captions Text and Color tab renamed to Caption Page 19

20 Drawing View Captions Drawing View style Caption Type Primary caption Secondary caption Show caption type displayed or not Caption text - allows the user to enter the caption text for the selected caption type Properties Suffix, Annotation Sheet Number, View Scale, Angle of Rotation Page 20

21 Drawing View Captions Font sets the font to be applied to the selected caption text Font style sets the style of the font to be applied to the selected caption text Color sets the color to be applied to the selected caption text Separator specifies whether there is a separator line between the primary and the secondary text Alignment specifies the alignment of the selected caption text Aspect Ratio sets the aspect ratio for the text in the selected caption Page 21

22 Drawing View Captions View Annotation Name specifies the name for the view annotation Annotation Sheet Number specifies the sheet number annotation View Scale defines the text to be used for the view scale Angle of Rotation defines the angle of rotation for the view Page 22

23 Drawing View Captions Quick Bar Show Caption available in all view type Quick Bar Shading option changes from a horizontal bar to vertical bar in all view type Quick Bar Page 23

24 Drawing View Captions Viewing Plane Text and Color tab has been renamed to Caption all View Properties boxes Same properties as Drawing View caption Left arrow, Right arrow Both arrows display caption to the arrow Page 24

25 Drawing View Captions Auto-Naming Annotations Drawing views and drawing view annotations being placed have a specific order to the naming conventions. Auto-Naming of View Annotations allows the user to define the derived order to use Specify Annotation Letters specifies the letters to be used in the annotation and opens a new window for selections of annotation formatting Page 25

26 Drawing View Captions Auto-Naming Annotations Two additional options: Follow object creation sequence Follow defined object sequence If selecting Follow defined object sequence, the user is allowed to define the sequence Page 26

27 Drawing View Captions Auto-Naming Annotations User can specify four different lists containing annotation letters and numbers Lists can be alphanumeric No repetitive characters allowed Special characters (Tab, new-line, carriage-return, space, and escape) are not allowed If the objects exceed the letters specified in the list, user has an option to continue the list appended with either the same letters or with 1, 2, 3.by selecting the subscript option Page 27

28 Drawing View Delete Undo Undo button is available if deleting the following: Drawing Views Parts Lists Bend Tables DELETE DELETE OOPS!!! OOPS!!! Page 28

29 Drawing View Display (w/drag) Drawing view dragging displays the geometry of the drawing view while it is being dragged Only the drawing view being dragged displays the geometry Any other drawing view that is aligned to the drawing view being dragged still displays the drawing view range box Page 29

30 Drawing View Display (w/drag) Show drag rectangle when full display time exceeds xx (milliseconds) Specifies that drawing view geometry is displayed while moving (dragging) a drawing view, unless it takes longer than the specified time to move it. The default time limit is 200 milliseconds When the time limit is exceeded, an empty rectangle that represents the drawing view boundary displays instead of the drawing view geometry Page 30

31 Drawing View Fixed Position Lock drawing view position Quick bar Select view Lock Lock from view properties DEMO 2 Page 31

32 Break Lines Support for both horizontal and vertical breaks in the same view Page 32

33 Break Lines Cylindrical and Short Break Short break-curved controls for Height and Pitch Short break-linear controls for Height and Pitch Page 33

34 Break Lines Cropped Edges Drawing View Properties dialog box General tab to show/hide the break lines. Thus when the break lines are hidden, we can show the cropped edges Unchecked Checked DEMO 3 Page 34

35 Broken Out Section Edges A Broken Out Section cutout is not a real cut on the parts. It is a drawing representation to accurately display internal structure of the parts The edges produced by the outline of the Broken Out Section are displayed only as a boundary for the hatch/fill area Cut edge is displayed with thin lines Line style options available in view properties Option Off Option On DEMO 4 Page 35

36 Hatch Rib in Section View Solid Edge option - Enable/Disable the creation of hatch in ribs cut in section views Option can be set to Hatch or No Hatch Hatch Ribs are considered part of the primary body and will be cut along with the primary body No Hatch Ribs are considered to be a separate body The ribs are pulled off of the primary body and cut separately Page 36

37 Hatch Ribs - Section Views option New property added to the Drawing View Advanced tab to allow the Hatch ribs setting to be specified on drawing views separately When checked, ribs are hatched When unchecked, the special rib non-hatched rib processing is done on the section view Page 37

38 Hatch Ribs - Criteria for Rib Processing The following rules apply to hatching and not hatching ribs Not hatching ribs applies to section, revolved section, and broken out section drawing views A rib is added to the list of ribs for possible inclusion in the non-hatch processing when the following criteria are met A segment of a cutting plane must intersect the rib The normal cutting of the rib would produce a hatched face in the section view Page 38

39 Hatch Ribs Broken out Section Broken Out Section views have special considerations as follows The Broken Out Section profile must be on the same view as the cut is applied Multiple cutouts can be made on a single drawing view. The hatch/non-hatch display of a rib is the same and is controlled collectively across multiple cutouts DEMO 5 Page 39

40 Sheet Scale Set Sheet Scale - two options to set the sheet scale Manual scale - The sheet scale can be set manually using the Scale and Scale value and is not associated with any Drawing View scale Drawing view scale - The sheet scale is derived from a drawing view and is associative with that view By default, sheet has Manual scale until a drawing view is placed using Drawing View wizard Page 40

41 Sheet Scale User can change the derived sheet scale from other views using the Set sheet scale command Command also located on the shortcut menu of Sheet tab Page 41

42 Dimensions Support for GB and ESKD templates GB and ESKD styles added to Styles command Page 42

43 Dimensions Override Pulled out Text Text which is pulled off or out of a linear or angular dimension line is displayed according to the override Orientation and Position settings Orientation - You can set the orientation to horizontal, vertical, perpendicular, or parallel with respect to the dimension line Position - Sets the position of dimension text when it is pulled away from the dimension line ST3 ST4 Page 43

44 Dimensions - Degree Symbol on Angular Tolerance Display the degree symbol to the angular tolerance value when angular tolerances are displayed Page 44

45 Dimensions - ISO/DIN Thread Dimension Dimensions to a threaded diameter now display Hole Callout data Quick Bar has a Hole Callout option Supported by Draft, Sketch and PMI dimensions Page 45

46 Dimensions - Jogs to Dimension Jogs can be added to Smart Dimension (linear, between two lines, diameter, etc.) and Distance Between dimensions that have two parallel linear projection lines Adding jogs to projection lines is limited to the following dimension types: Linear Dimensions. Symmetrical Diameter Dimensions Circular Diameter Dimensions (2 Projection Lines) 3D Dimensions in isometric views do not allow jogs Supported in Draft, Sketch and PMI dimensions Page 46

47 Dimensions - Jogs to Dimension Alt + click on one of the projection lines adds the jog Jogs can be added to either or both projection lines Multiple jogs may be added to each projection line Alt + click on one of the key points associated with an inserted jog removes the jog Page 47

48 Dimensions - Zero Inch for Feet and Inch When dimension units are set to feet-inch with fractional round off, a leading zero for the inch units will be displayed Example, if the distance is inches. The units set to feet-inch with fractional round off the readout would be "1-0 1/4" instead of the current "1-1/4" Page 48

49 Dimensions Copy Attributes Prefix Copier as been rename to Copy Attributes Dimension Styles can be copied from one dimension to another DEMO 6 Page 49

50 Drawing View Style A Drawing View Style Options Tabs Name Caption Caption Format Lines Page 50

51 Drawing View Style Name Tab Gives the style a name and description based on a standard Page 51

52 Drawing View Style Caption Tab Defines caption content Drawing View View Annotations Properties Page 52

53 Drawing View Style Caption Format Tab Specifies the appearance of a drawing view caption and of a view annotation caption Formatting Location Page 53

54 Drawing View Style Lines Tab Defines the appearance of view annotations that use the drawing view style Page 54

55 Solid Edge Options - Drawing View Style Drawing View Style new option only exists in Draft Use Drawing View Style Mapping - this is similar to the control on the Use dimension style mapping on the Dimension Style tab Page 55

56 Solid Edge Options - Annotation New Caption options Show sheet number if parent annotation (e.g. cutting plane) and derived view (e.g. section view) do not reside on the same sheet Displays a cross-reference between the sheet and the view annotation Show drawing view scale if different from sheet scale When a drawing view is created that has a different scale than the sheet scale, automatically displays the drawing view scale in the caption Show rotation angle if drawing view is rotated If a drawing view is rotated after placement, the rotation angle is displayed in the drawing view caption Page 56

57 Annotation Symbols New ANSI ASME symbols and ISO equivalent symbols have been added to bring the standards up to date. Symbols Translation - Independency - Continuous Feature - All Over - Volvo Oval - Volvo Rectangular Taper Angle(4 directions) Centerline Parting Line Symmetric Taper Angle(2 directions) GB Rotated View Counterclockwise GB Rotated View Clockwise - Page 57

58 Annotation Symbols New JIS Weld Symbols Symbols JIS Spot JIS Seam Keyhole Scarf Stud Continuation fillet weld Page 58

59 Annotation Symbols Select Symbols and Values Dialog Areas to display Symbols and Values Dialog Modify Dimension Style Dimension Properties Dimension Prefix Hole Table Bend Table Properties Feature Control Frame Properties Callout Properties GOST Weld Symbol Properties Property Text Dialog Drawing View Properties Text Box Page 59

60 Annotation - Auto balloon Fastener Systems Stack fastener system balloons automatically You can do this when placing a ballooned parts list or when adding balloons manually with the Balloon command Page 60

61 Annotation - Auto balloon Fastener Systems You can arrange fastener system balloons automatically in horizontal or vertical stacks Text alignment can only be used with the underline balloon type DEMO 7 Page 61

62 Annotation Callout aspect ratio Full text formatting capabilities are available for all callouts in the Draft environment and for model PMI Enhancements to Callout Properties Specify Aspect Ratio to characters in a Callout Page 62

63 Annotation Callout aspect ratio Show border outline - Displays a border around the callout text Gap between border and text Horizontal - Specifies the space between the callout text and the horizontal edges of the border on the callout Vertical - Specifies the space between the callout text and the vertical edges of the border on the callout Fit width to contents - Automatically sizes the width of the callout box to its contents. Use this option to ensure that resolved property text always fits into an allotted space, such as in a title block cell in a drawing border Page 63

64 Annotation Callout aspect ratio Fixed width - Maintains the width of the callout to be exactly the value specified in the adjacent box Automatically adjust aspect ratio Changes the width of the characters in the callout text, without changing their height. The new aspect ratio is applied to all of the characters in the callout text box, not just the characters that exceed the specified callout width Page 64

65 Annotation Callout aspect ratio Calculated aspect ratio - Displays the current aspect ratio of the characters in the callout Wrap text - Automatically word-wraps the text that extends beyond the specified line width. A new line is started each time one or more characters in a word exceed the width of the callout box All options are available for PMI Callouts (included in the drawing view from model view) Draft Callouts in Draft environment PMI Callouts in Part environment Page 65

66 Annotation Callout aspect ratio Callout Quick Bar Resizing Callout The user can resize only the width of the Callout The height automatically changes once the user selects the wrap text option and reduces the width Page 66

67 Annotation Callout aspect ratio Leader attachment and Leader handles Handle for resizing the break line is located at the attachment point of break-line and border. This handle also flips the leader attachment to front (right) or back (left) of the Callout. The handle is not available when there is no break DEMO 8 Page 67

68 Feature Control Frames - Handles Feature Control Frame (FCF) handles consistent with other annotation handles Resizing the break line, flipping the leader attachment and moving the break line along the FCF border Alt+drag break line handle for snapping to FCF key-points Select the FCF and move freely anywhere on the screen FCF has nine snap-points. Located at corners, midpoints of each side and one at center of the divider Page 68

69 Feature Control Frames Orientation Horizontal Vertical Perpendicular Parallel Page 69

70 Feature Control Frames - Flipping Flip the FCF at 90 and 270 degrees when attached to an entity without leader Page 70

71 Feature Control Frames - Composite Increase the number of input fields to four lines Each line has the option merge the composite with the upper line DEMO 9 Page 71

72 Text Box - Stack Stack button added to the Text Box Quick Bar to support insertion of fraction Text content to be stacked Upper Lower Style - Specifies the arrangement of stacked text or numbers Stacked, Tolerance, Skewed, and Linear Align normal text with - specifies how the surrounding, normal text is aligned with the stack Page 72

73 Text Box - Stack Size of text relative to font size - specifies the font size of the stack as a percent Auto Stack - applies stack formatting automatically to numbers and symbols as you type Page 73

74 Text Box Bullets and Numbering Support for Bullets and Numbers Choose the type list Bullets (and select type of bullet) Numbered No list Numbered list Restart at 1 Continue Numbering Bullet and Numbered list Decrease Indent Increase Indent Page 74

75 Text Box Bullets and Numbering By default the Bullets and Numbered list has a left indent of half-tab stop value and a hanging indent of half-tab stop value At the end of the bulleted paragraph, when you hit ENTER to create a new paragraph, the bulleted list continues When finished with your bulleted list, press ENTER and then select the No List option to turn off bullet formatting Page 75

76 Text Box Bullets and Numbering Start at - Specifies the first number in the numbered list The default is 1 Specifies the numbering format. Formats available: ) (1) Page 76

77 Text Box Bullets and Numbering Increase Indent - increases the indentation of the current paragraph or the selected paragraphs Decrease Indent - decreases the indentation of the current paragraph or the selected paragraphs Page 77

78 Text Box Bullets and Numbering When the bullets/numbers are SELECTED, the following changes for these bullets/numbers can be made: Text Scale Font (Only for numbers. Not for bullets.) Font Size Color Bold Italic Underline Justification Indents Change to bulleted list or numbered list or no list. Page 78

79 Text Box Text Style New Indent and Spacing tab in the Text Style Page 79

80 Text Box Fixed Width Text Box Text size is managed within the text box border, option available in the Quick Bar Fit to Content automatically sizes the width of the text box border to its contents Fixed Adjust Aspect Ratio adjusts text size automatically to maintain the fixed width and height Fixed Wrap Text automatically word-wraps the text that extends beyond the specified line width Page 80

81 Text Box Insert Characters Page 81

82 Text Box Justification Text Box Justification has nine options for justification Quick Bar Justification has the same nine options DEMO 10 Page 82

83 Reattach Centerline When centerlines become detached, they change color to the detached color like a dimension Dimension Tracker lists the detached centerline annotation If centerline was created with the (by 2 lines) type and the centerline becomes detached, it maintains the (by 2 line) type Page 83

84 Reattach Centerline New handles added to reattach centerline to changes in the drawing view Drag both handle to reattach to update centerline DEMO 11 Page 84

85 Reattach Center Mark and Bolt Hole Circle When center marks/bolt hole circle become detached, they change color to the detached color like a dimension does Dimension Tracker lists the detached center marks/bolt hole circle annotation A center marks/bolt hole circle become detached when a feature has been deleted Page 85

86 Reattach Center Mark and Bolt Hole Circle Drag handles to reattach center marks/bolt hole circle to changes in the drawing view Drag dimension handles to reattach to update detached dimensions Page 86

87 Reattach Center Mark and Bolt Hole Circle Centerline handles can be reattached to any geometry ATL+drag detachs and drops on new location DEMO 12 Page 87

88 Thank You!

User Guide V10 SP1 Addendum

User Guide V10 SP1 Addendum Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or

More information

Control Frame) Datum Target. 1 All rights reserved SpaceCAD Ltd

Control Frame) Datum Target. 1 All rights reserved SpaceCAD Ltd ,.,.,,., : (Text Box) (Balloon) (Callout) (Connector) (Feature Control Frame) (Datum Frame) Datum Target (Surface Texture) 1 (Weld Symbol) (Center Mark) (Center Line) : ) Leader line ) Break line ) Terminator,

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

Welcome to Solid Edge University

Welcome to Solid Edge University #SEU15 Welcome to Solid Edge University Realize innovation. State-of-the-Art Drafting, Made Even Better Investing in What You Need General Workflow Dimension Enhancements Annotation Enhancements Page 2

More information

Set your drafting standard and drawing preferences

Set your drafting standard and drawing preferences DRAFTING The Drafting application is designed to allow you to produce and maintain industry standard engineering drawings directly from the 3D model or assembly part. Drawings created in the Drafting application

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

SOLIDWORKS 2016 Basic Tools

SOLIDWORKS 2016 Basic Tools SOLIDWORKS 2016 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

Generative Drafting (ISO)

Generative Drafting (ISO) CATIA Training Foils Generative Drafting (ISO) Version 5 Release 8 January 2002 EDU-CAT-E-GDRI-FF-V5R8 1 Table of Contents (1/2) 1. Introduction to Generative Drafting Generative Drafting Workbench Presentation

More information

Certified SOLIDWORKS Professional Advanced Preparation Materials

Certified SOLIDWORKS Professional Advanced Preparation Materials Includes Preparation for Five Advanced Certification Exams Certified SOLIDWORKS Professional Advanced Preparation Materials Sheet Metal, Weldments, Surfacing, Mold Tools and Drawing Tools SOLIDWORKS 2016

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

AUTODESK INVENTOR Trial Projects

AUTODESK INVENTOR Trial Projects AUTODESK INVENTOR Trial Projects Drawing Creation Create detailed drawings of a collar flange PART 1: CREATING DRAWING VIEWS page: 2 1. 2. 3. Start by clicking the Projects icon in the ribbon. Navigate

More information

Below are the desired outcomes and usage competencies based on the completion of Project 4.

Below are the desired outcomes and usage competencies based on the completion of Project 4. Engineering Design with SolidWorks Project 4 Below are the desired outcomes and usage competencies based on the completion of Project 4. Project Desired Outcomes: An understanding of the customer s requirements

More information

Getting Started. Before You Begin, make sure you customized the following settings:

Getting Started. Before You Begin, make sure you customized the following settings: Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides

More information

SolidWorks 2014 Part I - Basic Tools

SolidWorks 2014 Part I - Basic Tools SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

SolidWorks 2013 Part I - Basic Tools

SolidWorks 2013 Part I - Basic Tools SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Engineering Technology

Engineering Technology Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,

More information

SOLIDWORKS 2018 Basic Tools

SOLIDWORKS 2018 Basic Tools SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

CATIA Instructor-led Live Online Training Program

CATIA Instructor-led Live Online Training Program Course Outline Introduction & Understanding to CATIA Environment Introduction & Understanding to CATIA interface Starting new file Understand the Sketcher workbench of CATIA V5 Start a new file in the

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Beginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS

Beginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling

More information

Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece

Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece 1 Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece In this Module, we will explore the method of adding dovetail seams to curved edges such as the circumferential edge of a

More information

Working With Drawing Views-I

Working With Drawing Views-I Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined

More information

Engineering Design with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.

Engineering Design with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P. Engineering Design with SolidWorks 2003 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com

More information

GEN20604 Intelligent AutoCAD Model Documentation Made Easy

GEN20604 Intelligent AutoCAD Model Documentation Made Easy GEN20604 Intelligent AutoCAD Model Documentation Made Easy David Cohn 4D Technologies Learning Objectives Learn how to create base views and projected views from 3D models Learn how to create and control

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...

More information

Starting a 3D Modeling Part File

Starting a 3D Modeling Part File 1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce

More information

Lesson 4 Holes and Rounds

Lesson 4 Holes and Rounds Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information

More information

Toothbrush Holder. A drawing of the sheet metal part will also be created.

Toothbrush Holder. A drawing of the sheet metal part will also be created. Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit

More information

Making an Architectural Drawing Template

Making an Architectural Drawing Template C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards:! Starting from Scratch for the Last time! Creating

More information

Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)

Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model

More information

Creo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School

Creo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School Creo: Hole, Fillet, and Round Layout/Dimension Tutorial Layout of a Part with Holes 1. Open a blank drawing with your border and title block By: Matthew Jourden Brighton High School 2. Place the front,

More information

SOLIDWORKS 2017 Basic Tools

SOLIDWORKS 2017 Basic Tools SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Advance Steel. Tutorial

Advance Steel. Tutorial Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating

More information

1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity

1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity Contents 2D Sketch... 1 1.1 2D Sketch Introduction... 1 1.1.1 2D Sketch... 1 1.1.2 Basic Setting of 2D Sketch... 2 1.1.3 Exit 2D Sketch... 4 1.2 Draw Common Geometry... 5 2.2.1 Points... 5 2.2.2 Lines

More information

Release Notes - Fixes in Tekla Structures 2016i PR1

Release Notes - Fixes in Tekla Structures 2016i PR1 Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups

More information

Dimensioning the Rectangular Problem

Dimensioning the Rectangular Problem C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing

More information

Engineering Design. with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling

Engineering Design. with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects Engineering Design with SolidWorks 2010 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling Introductory Level

More information

ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

More information

The Revolve Feature and Assembly Modeling

The Revolve Feature and Assembly Modeling The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling

More information

GstarCAD Mechanical 2015 Help

GstarCAD Mechanical 2015 Help 1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols

More information

Part Design Fundamentals

Part Design Fundamentals Part Design Fundamentals 1 Course Presentation Objectives of the course In this course you will learn basic methods to create and modify solids features and parts Targeted audience New CATIA V5 Users 1

More information

Engineering Design with

Engineering Design with Engineering Design with SOLIDWORKS 2016 and Video Instruction A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard, CSWP, SOLIDWORKS Accredited Educator SDC PUBLICATIONS

More information

SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.

AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here. AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and

More information

Anchor Block Draft Tutorial

Anchor Block Draft Tutorial Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views

More information

Making an Architectural Drawing Template

Making an Architectural Drawing Template C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards: 1. Starting from Scratch 2. Creating New Layers

More information

Autodesk Advance Steel. Drawing Style Manager s guide

Autodesk Advance Steel. Drawing Style Manager s guide Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style

More information

1. Reference Guide and Glossary

1. Reference Guide and Glossary 1. Reference Guide and Glossary Design Panel New Click the New Icon at any time to create a new project from scratch. Projects Browse, select, and cut projects from the Projects Tab. This includes your

More information

To start a new drawing Select File New then from the dialog box, which appears select Normal.dft followed by OK.

To start a new drawing Select File New then from the dialog box, which appears select Normal.dft followed by OK. Draft Tutorial This tutorial provides step-by-step instructions for the detailing of a drawing of the anchor block shown opposite. As you create this drawing, you will use the following drafting techniques:

More information

Advance Steel. Drawing Style Manager s guide

Advance Steel. Drawing Style Manager s guide Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9

More information

Getting started with. Getting started with VELOCITY SERIES.

Getting started with. Getting started with VELOCITY SERIES. Getting started with Getting started with SOLID EDGE EDGE ST4 ST4 VELOCITY SERIES www.siemens.com/velocity 1 Getting started with Solid Edge Publication Number MU29000-ENG-1040 Proprietary and Restricted

More information

Creo Revolve Tutorial

Creo Revolve Tutorial Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate

More information

Release Notes - Fixes in Tekla Structures 2016i SP1

Release Notes - Fixes in Tekla Structures 2016i SP1 Release Notes - Fixes in Tekla Structures 2016i SP1 is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups instead of tapered groups., the

More information

Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1

Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch

More information

Modeling an Airframe Tutorial

Modeling an Airframe Tutorial EAA SOLIDWORKS University p 1/11 Difficulty: Intermediate Time: 1 hour As an Intermediate Tutorial, it is assumed that you have completed the Quick Start Tutorial and know how to sketch in 2D and 3D. If

More information

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored

More information

8 Working Drawings in AutoCAD

8 Working Drawings in AutoCAD 8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of

More information

Appendix R5 6. Engineering Drafting. Broken View

Appendix R5 6. Engineering Drafting. Broken View Updating Using Autodesk Inventor to Release 5 Appendix R5 6 Engineering Drafting Chapter 6 delineates the concepts of engineering drafting. You output orthographic views from solid parts and orthographic

More information

Ball Valve Assembly. On completion of the assembly, we will create the exploded view as shown on the right.

Ball Valve Assembly. On completion of the assembly, we will create the exploded view as shown on the right. Ball Valve Assembly Supplied are the main components of a ball valve. In this exercise you will assemble the valve as shown below Left. (N.B. Socket head cap screws are not supplied these will be created

More information

AutoDesk Inventor: Creating Working Drawings

AutoDesk Inventor: Creating Working Drawings AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working

More information

Evaluation Chapter by CADArtifex

Evaluation Chapter by CADArtifex The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching

More information

Alibre Vault Integration Automatic Check-in Prompt Sheet Metal Lofted Flanges & Assembly Constraints Sheet Metal Parameters

Alibre Vault Integration Automatic Check-in Prompt Sheet Metal Lofted Flanges & Assembly Constraints Sheet Metal Parameters 1 TABLE OF CONTENTS General User Interface... 5 User Interaction Consistency... 5 Ctrl and Shift Behaviors... 5 Right-Click Behavior... 5 Dragging the Dog Bone... 6 Apply Button Added to Dialogs... 6 Missing

More information

Creo Parametric 4.0 Basic Design

Creo Parametric 4.0 Basic Design Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes

More information

Student + Instructor:

Student + Instructor: DRAFT OF DEMO FOR The following set of instructions are an optional replacement for the Section Views in SolidWorks. This demo should help prepare the students for the Out of Class HW Student + Instructor:

More information

ME Week 2 Project 2 Flange Manifold Part

ME Week 2 Project 2 Flange Manifold Part 1 Project 2 - Flange Manifold Part 1.1 Instructions This project focuses on additional sketching methods and sketching commands. Revolve and Work features are also introduced. The part being modeled is

More information

Geometry Controls and Report

Geometry Controls and Report Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for

More information

and Engineering Graphics

and Engineering Graphics SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Shaft Hanger - SolidWorks

Shaft Hanger - SolidWorks ME-430 INTRODUCTION TO COMPUTER AIDED DESIGN Shaft Hanger - SolidWorks BY: DR. HERLI SURJANHATA ASSIGNMENT Submit TWO isometric views of the Shaft Hanger with your report, 1. Shaded view of the trimetric

More information

Dimension Styles. EDT Chapter 18 - Basic Dimensioning Practices 1

Dimension Styles. EDT Chapter 18 - Basic Dimensioning Practices 1 Dimension Styles EDT 310 - Chapter 18 - Basic Dimensioning Practices 1 Dimension Styles The appearance of dimensions is controlled by over 70 different settings. Dimension Styles are saved configurations

More information

Assembly Receiver/Hitch/Ball/Pin to use for CAD LAB 5A and 5B:

Assembly Receiver/Hitch/Ball/Pin to use for CAD LAB 5A and 5B: MECH 130 CAD LAB 5 SPRING 2017 due Friday, April 21, 2016 at 4:30 PM All of LAB 5 s hardcopies will be working drawing layouts. Do not print out from the part file. We will be using the ME130DRAW drawing

More information

Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators.

Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators. Workspace tour Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators. This tutorial will help you become familiar with the terminology and

More information

Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder

Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder Inventor (10) Module 1E: 1E- 1 Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder In this Module, we will explore the topic

More information

Lesson 4 Extrusions OBJECTIVES. Extrusions

Lesson 4 Extrusions OBJECTIVES. Extrusions Lesson 4 Extrusions Figure 4.1 Clamp OBJECTIVES Create a feature using an Extruded protrusion Understand Setup and Environment settings Define and set a Material type Create and use Datum features Sketch

More information

AutoCAD 2018 Fundamentals

AutoCAD 2018 Fundamentals Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about

More information

An Introduction to Dimensioning Dimension Elements-

An Introduction to Dimensioning Dimension Elements- An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements

More information

Advance Dimensioning and Base Feature Options

Advance Dimensioning and Base Feature Options Chapter 4 Advance Dimensioning and Base Feature Options Learning Objectives After completing this chapter you will be able to: Dimension the sketch using the autodimension sketch tool. Dimension the sketch

More information

Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.

Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I. Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA

More information

Introduction to ANSYS DesignModeler

Introduction to ANSYS DesignModeler Lecture 4 Planes and Sketches 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations

More information

for Solidworks TRAINING GUIDE LESSON-9-CAD

for Solidworks TRAINING GUIDE LESSON-9-CAD for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working

More information

Beginner s Guide to SolidWorks Level I

Beginner s Guide to SolidWorks Level I Beginner s Guide to SolidWorks 2013 - Level I Parts, Assemblies, Drawings, Simulation Xpress Alejandro Reyes MSME, CSWP, CSWI SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices.

More information

Digital Camera Exercise

Digital Camera Exercise Commands Used New Part This lesson includes Sketching, Extruded Boss/Base, Extruded Cut, Fillet, Chamfer and Text. Click File, New on the standard toolbar. Select Part from the New SolidWorks Document

More information

Product Modelling in Solid Works

Product Modelling in Solid Works Product Modelling in Solid Works In the following exercise you will use solid works to construct the computer mouse shown opposite. In this exercise you will use a number of advanced features to achieve

More information

NX9 Manual Drafting. BINDE Training

NX9 Manual Drafting. BINDE Training Extract of 82 pages NX9 Manual Drafting Drafting K Table of contents 1 K - Drafting K1 Start Drafting K1-1 Create Drawing K1-3 Drawing Navigator K1-4 Drafting Ribbon Bar K2 Drawing Sheet K3 Views K3-1

More information

How to Build a Game Console. David Hunt, PE

How to Build a Game Console. David Hunt, PE How to Build a Game Console David Hunt, PE davidhunt@outdrs.net Covering: Drafts Fillets Shells Patterns o Linear o Circular Using made-for-the-purpose sketches to define reference geometry Using reference

More information

Introduction to Sheet Metal Features SolidWorks 2009

Introduction to Sheet Metal Features SolidWorks 2009 SolidWorks 2009 Table of Contents Introduction to Sheet Metal Features Base Flange Method Magazine File.. 3 Envelopment & Development of Surfaces.. 14 Development of Transition Pieces.. 23 Conversion to

More information

SDC. SolidWorks Tutorial 2001Plus. A Competency Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.

SDC. SolidWorks Tutorial 2001Plus. A Competency Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P. 2001Plus A Competency Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com Project 2 Below are the desired

More information

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command. DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

Drawing and Detailing

Drawing and Detailing Drawing and Detailing with SolidWorks 2005 By David C. Planchard and Marie P. Planchard Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices SDC PUBLICATIONS Schroff Development

More information

Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models

Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models GEN20552-L Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models J.C. Malitzke Digital JC CAD Learning Objectives Learn how to create drawing views of AutoCAD 3D models for

More information

SolidWorks Navigation

SolidWorks Navigation SolidWorks Basics SolidWorks Navigation Command Bar Feature Tree Model Window Simple Box Select the Front plane Create a new sketch Create a Center Rectangle from the origin Smart Dimension the length

More information

< Then click on this icon on the vertical tool bar that pops up on the left side.

< Then click on this icon on the vertical tool bar that pops up on the left side. Pipe Cavity Tutorial Introduction The CADMAX Solid Master Tutorial is a great way to learn about the benefits of feature-based parametric solid modeling with CADMAX. We have assembled several typical parts

More information

Digital Photography 1

Digital Photography 1 Digital Photography 1 Photoshop Lesson 3 Resizing and transforming images Name Date Create a new image 1. Choose File > New. 2. In the New dialog box, type a name for the image. 3. Choose document size

More information

Creo Parametric Primer

Creo Parametric Primer PTC Creo Parametric - Primer Student and Academic Editions 02 Helpful hints are enclosed in red brackets or round bubbles like this one! Creo Parametric Primer THIS VERSION OF THE CREO PRIMER HAS BEEN

More information

SOLIDWORKS 2018 Intermediate Skills

SOLIDWORKS 2018 Intermediate Skills SOLIDWORKS 2018 Intermediate Skills Expanding on Solids, Surfaces, Multibodies, Configurations, Drawings, Sheet Metal and Assemblies Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.

More information

Table of Contents. Lesson 1 Getting Started

Table of Contents. Lesson 1 Getting Started NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

Introduction to CATIA V5

Introduction to CATIA V5 Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower

More information

Drawing and Detailing with SolidWorks 2014

Drawing and Detailing with SolidWorks 2014 r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices

More information