Tutorial Guide to AutoCAD 2014

Size: px
Start display at page:

Download "Tutorial Guide to AutoCAD 2014"

Transcription

1 Tutorial Guide to AutoCAD D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices.

2 Visit the following websites to learn more about this book:

3 ii Brief Table of Contents GS-1 Preparing for the Tutorials GS-2 AutoCAD Basics GS Creating Assembly Drawings from Solid Models Solid Modeling for Section and Auxiliary Views 543 GS-3 Studying for the AutoCAD Certification Exam G Rendering Introduction to the AutoCAD Software 1 Glossary Basic Construction Techniques 55 AutoCAD Command Summary Basic Editing and Plotting Techniques 91 Index Geometric Constructions Template Drawings and More Plotting D Orthographic Drawings Dimensioning Advanced Dimensioning Section and Auxiliary Views Blocks, DesignCenter, and Tool Palettes Introduction to Solid and Surface Modeling Changing and Plotting Solid Models 481

4 Table of Contents iii Table of Contents GS-1 Preparing for the Tutorials GS1-1 Using the Ribbon GS2-7 Introduction to the Tutorials GS1-1 Backing Up and Backing Out of Commands GS2-9 Basic Mouse Techniques GS1-1 Repeating Commands GS2-9 Objectives GS1-1 Working with the Ribbon 0 Recognizing Typographical Conventions GS1-2 Accessing On-Line Help 3 Creating a Working Directory GS1-4 Using Classic Pull-Down Menus 4 Installing Data Files for the Tutorials GS1-4 Working with Documents 6 Configuring AutoCAD for the Tutorials GS1-5 Exiting an AutoCAD Session 6 User Profiles Backing Up AutoCAD Defaults Customizable Support Files GS-2 AutoCAD Basics Introduction Starting the AutoCAD 2014 Software Microsoft Windows Conventions Objectives Navigating in Windows Basic Elements of the AutoCAD Graphics Window Minimizing and Restoring an Application Microsoft Windows Multitasking Options AutoCAD Pointing Techniques Clicking Commands and Menu Options Entering Points Dragging Object Selection AutoCAD Commands and Options Typing Commands Switching the Workspace GS1-7 GS1-10 GS1-11 GS2-2 GS2-2 GS2-2 GS2-3 GS2-3 GS2-3 GS2-3 GS2-4 GS2-4 GS2-4 GS2-5 GS2-6 GS-3 Studying for the AutoCAD Certification Exam G3-1 General Study Tips G3-1 Objectives G3-1 Exam Objectives G3-2 Certified Associate Exam Examples G3-2 1 Introduction to the AutoCAD Software 1 Introduction 1 Starting 1 The AutoCAD Screen 1 The Ribbon 3 Canceling Commands 6 Typing Commands 6 Dynamic Entry 7 Starting a New Drawing 9 Naming Drawing Files 10 Working with Multiple Drawings 11 Using Grid 13 Using Zoom 14 Using Snap Mode 15

5 iv Table of Contents Drafting Settings 16 Using Line 16 Entering Coordinates 17 Using Absolute Coordinates 17 Drawing Using Grid and Snap 18 Using Last Point 18 Using Relative X- and Y-Coordinates 19 Using Polar Coordinates 20 Using the Exchange to Get Help 22 Using Save 24 Using Erase 24 Erasing with Window or Crossing 25 Using Undo 26 Using Redo 28 Drawing a Plot Plan 28 Setting the Units 29 Sizing Your Drawing 32 Using Limits 33 Using Rectangle 34 Drawing Circles 35 Adding Text 36 Copying Text 38 In Place Text Editing 39 Moving and Rotating Text 39 Setting the Text Style 40 Setting a Style Current 44 Using Mtext 44 Spell Checking Your Drawing 48 Saving Your Drawing 49 Transferring Files 49 Exercises 51 2 Basic Construction Techniques 55 Introduction 55 Starting 55 Opening an Existing Drawing 55 Saving as a New File 57 Using Layers 58 Current Layer 58 Controlling Layers 59 Controlling Colors 60 Layer Visibility 61 Freezing Layers 62 Locking Layers 62 Making Object s Layer Current 63 Using Layer 64 Using Object Snap 67 Using Arc 70 Using Zoom 75 Using the Scroll Wheel to Zoom 79 Zoom Dynamic 79 Using Pan Realtime 80 Circle Tangent, Tangent, Radius 83 Using Ellipse 84 Exercises 87 3 Basic Editing and Plotting Techniques 91 Introduction 91 Starting 91 Starting from a Template Drawing 91 Using Trim 93 Using Offset 96 Changing Object Properties 99

6 Table of Contents v Using the Properties Panel 99 The Properties Palette 100 Using Fillet 102 Using Chamfer 103 Using Polyline 104 Using Spline 107 Using Blend 108 Getting Information about Your Drawing 110 Using List 110 Locating Points 111 Measuring Geometry 111 Area 111 Using Multilines 112 The Plot Dialog Box 116 Exercises Geometric Constructions 129 Introduction 129 Starting 129 Setting the Units and Limits 129 Drawing the Wrench 130 Using Copy Object 130 Effective Use of Layers 132 Changing Properties 134 Setting the Global Linetype Scaling Factor 135 Changing an Object s Linetype Scale 136 Using Polygon 138 Using Polar Tracking 140 Using Object Snaps 143 Showing a Floating Toolbar 143 Object Snap Overrides 144 More Object Snaps 149 Object Tracking 151 Using Break 151 Using Extend 153 Using Rotate 154 Using Move 155 Methods of Selecting Objects 155 Select Similar 157 Using Selection Filters 158 Using Quick Select 159 Creating the Geneva Cam 160 Using Construction Line (Xline) 162 Using Mirror 164 Using Array 166 Editing Associative Arrays 167 Making Changes using Grips 168 Noun/Verb Selection 171 Using the Path Array 172 Editing an Associative Path Array 174 Using 2D Parametric Constraints 177 Exercises Template Drawings and More Plotting 193 Introduction 193 Starting 193 Using a Standard Template 193 Paper Space Layouts 195 Printer Area 196 Viewport 196 Switching to Model Space 198 Inserting an Existing Drawing 198

7 vi Table of Contents Showing the Drawing in the Layout 200 Setting the Viewport Zoom Scale 201 Using Pan to Position the Drawing 204 Locking the Viewport Scale 205 Creating a Second Floating Viewport 205 Making a Viewport Active 207 Attributes and Fields 209 Using Irregularly Shaped Viewports 211 Plotting from Paper Space 213 Sheet Sets 214 Creating a Template Drawing 220 Creating Default Layers 221 Using the Drafting Settings Dialog Box 229 Selecting the Default Text Font 230 Setting the Viewres Default 230 Switching to a Paper Space Layout 231 Adding a Title Block and Text to Paper Space 232 Using Divide 233 Adding the Titles 235 Beginning a New Drawing from a Template Drawing 236 Changing the Title Block Text 237 Exercises D Orthographic Drawings 243 Introduction 243 The Front, Top, and Right-Side Orthographic Views 243 View Location 244 Starting 244 Switching to Model Space 246 Deciding the Model Space Limits 246 Viewing the Model Space Limits 247 Using Ortho 247 Drawing Construction Lines 247 Hidden Lines 251 Drawing Hidden Lines 252 Line Precedence 254 Slanted Surfaces 255 Top-View to Side-View Projection 256 Drawing the Miter Line 257 Using Object Snap Tracking 257 Sizing and Positioning the Drawing 260 Locking the Viewport Scale 261 Showing Holes 262 Drawing Centerlines and Centermarks 263 Breaking the Centerline 265 Setting the Global Linetype Scaling Factor 267 Projecting Slanted Surfaces on Cylinders 268 Exercises Dimensioning 277 Introduction 277 Terminology and Conventions 277 Semiautomatic Dimensioning 278 Starting 279 Dimensioning a Shape 279 Using the DIM Layer 280 Dimension Standards 280 Associating Dimensions 280 Annotation Scaling 281 The Dimension Panel 282 Using Dimension Styles 282 Creating a Named Dimension Style 283

8 Table of Contents vii Scaling Dimension Features 284 Lines tab 284 Symbols and Arrows tab 286 Text tab 288 Fit Tab 289 Setting the Current Style 295 Checking Your Dimension Settings 296 Associative Dimensioning 297 Adding Dimensions to the Layout or the Model 297 Adding Linear Dimensions 298 Creating a Diameter Dimension 299 Baseline Dimensioning 301 Using Xplode 303 Adding Text with Special Characters 304 Using Quick Dimension 305 Saving As a Template 306 Dimensioning the Adapter 307 Using Continue Dimension 308 Angular Dimensions 309 Centering the Views 310 Adding the Tolerance Note 311 Updating Associative Dimensions 311 Using Stretch 312 Modifying Dimensions 313 Updating a Dimension Style 314 Changing the Drawing Scale 315 The Annotation Property 317 Synch the Annotative and Viewport Scales 318 Creating an Annotative Text Style 318 Exercises Advanced Dimensioning 325 Tolerance 325 Tolerance Formats 326 Starting 327 Automatic Bilateral Tolerances 327 Using Limit Tolerances 334 Creating Feature Control Frames 336 Using Leader with Tolerances 340 Creating Datum Flags 342 Creating an Annotative Dimension Style 344 Exercises Section and Auxiliary Views 349 Introduction 349 Section Views 349 Starting 351 Creating 2D Section Views 351 Cutting Plane Lines 352 Changing Hidden Lines to Visible 356 Using Hatch 357 Adding the Hatch Pattern 363 Creating the Side Section View 364 Solid Fill 367 Using Draworder 368 Changing Associative Hatches 369 Auxiliary Views 372 Drawing Auxiliary Views Using 2D 372 Aligning the UCS with the Angled Surface 374 Adding Visual Reference Lines 378 Linetype Conventions 378 Curved Surfaces 379 Drawing the Ellipse 384 Exercises 386

9 viii Table of Contents 10 Blocks, DesignCenter, and Tool Palettes 391 Introduction 391 Starting 392 Using the Block Command 392 Inserting a Block 395 Using Explode 397 Using Write Block 397 Using DesignCenter and Tool Palettes 399 Drawing the Half-Adder Circuit 404 Using Donut 405 Freezing the TEXT2 Layer 406 Creating Object Groups 406 Creating Custom Interfaces 409 Using Special Characters in Programmed Commands 414 Exercises Introduction to Solid and Surface Modeling 425 Introduction 425 Starting 426 The 3D Modeling Workspace 426 Creating 3D Objects 427 Setting the Viewpoint 428 User Coordinate Systems 432 The UCS Icon 433 Using Layers 434 Creating Multiple Viewports 435 Viewports Using Different UCSs 439 Creating Cylinders 440 Selection Cycling 441 Setting Isolines 443 Building Complex Solid Models 444 Using the Viewport Controls 445 Creating Wedges 446 Creating Cones 447 Creating User Coordinate Systems 448 Plotting Solid Models from Paper Space 451 Saving Your Multiview Setup as a Template 453 Creating Solid Models with Extrude and Revolve 454 Region Modeling 456 Extruding a Shape 457 Creating Solids by Revolution 459 Aligning the Views 459 Using the Boolean Operator Intersection 461 Creating Surface Models 465 Using Loft 466 Creating a Patch (SURFPATCH) 467 Creating Mesh Models 469 Creating an Edge Mesh 470 Using the Steering Wheel 471 Creating a Network Surface 472 Creating 3D Mesh 474 Exercises Changing and Plotting Solid Models 481 Introduction 481 Starting 481 Using Fillet on Solids 482 Using Chamfer on Solids 482 Using Slice 483 Creating the Hole 490 Placing Views to Create a Drawing 492 Adding the Centerlines 496 Exercises 498

10 Table of Contents ix 13 Creating Assembly Drawings from Solid Models 503 Introduction 503 Attaching Solid Models 503 Using Plan 554 Using 3D Dynamic View 555 Exercises 557 Starting 504 Using External References 505 Layers and External References 507 Inserting the Solid Part Drawings 508 Checking for Interference 512 Determining Mass Properties (MASSPROP) 513 Creating an Exploded Isometric View 514 Creating a Dynamic Block for the Ball Tags 516 Defining Attributes 519 Defining the Parameters 523 Defining the Actions 524 Inserting the Ball Tags 526 Changing an Attribute Value 528 Changing an Externally Referenced Drawing 529 Creating the Parts List 531 Extracting Attribute Information 531 Exercises Rendering 561 Introduction 561 Objectives 561 The Render Panel 562 Advanced Render Settings 567 Adding Lights 573 Choosing Materials 577 Creating a New Material 579 Adjusting Mapping 582 Adding Backgrounds 583 Rendering to a File 584 Using Sun Properties 585 Geographic Location 585 Exporting AutoCAD Files 590 Drawing Web Format 592 Exercises Solid Modeling for Section and Auxiliary Views 543 Introduction 543 Creating Sections from a Solid Model 543 Adding a Section View 546 Using Section Plane 548 Glossary 601 AutoCAD Command Summary 617 Index 645 Using Live Section 549 Section Settings 550 Creating an Auxiliary View from a 3D Model 551 Orienting the View Point UCS 553

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

A TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company

A TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California

More information

Principles and Practice:

Principles and Practice: Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

First Level 2D Fundamentals

First Level 2D Fundamentals AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

06/17/02 Page 1 of 12

06/17/02 Page 1 of 12 Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive

More information

AutoCAD LT 2010 Tutorial

AutoCAD LT 2010 Tutorial AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table

More information

ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

More information

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment

More information

Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

More information

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS.   Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

More information

Mastering AutoCAD 2D

Mastering AutoCAD 2D Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust

More information

Required Materials For complete material(s) information, refer to

Required Materials For complete material(s) information, refer to Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.

More information

Table of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements

Table of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9

More information

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

More information

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning. Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will

More information

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction

More information

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer

More information

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command. DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2

More information

Introduction to AutoCAD 2012

Introduction to AutoCAD 2012 Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The

More information

AutoCAD Essentials. Course Length: 3 days

AutoCAD Essentials. Course Length: 3 days AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD

More information

SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Kankakee Community College

Kankakee Community College Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces

More information

ADA Curriculum for Pre-Engineering Students Correlation Guide

ADA Curriculum for Pre-Engineering Students Correlation Guide ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain

More information

Introduction to IntelliCAD 6

Introduction to IntelliCAD 6 Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD

More information

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/

More information

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

and Engineering Graphics

and Engineering Graphics SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

SYLLABUS. Apprenticeship Training Scheme

SYLLABUS. Apprenticeship Training Scheme SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001

More information

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT

More information

AutoCAD /AutoCAD LT Essentials

AutoCAD /AutoCAD LT Essentials AutoCAD /AutoCAD LT Essentials Course Length: 3 days The AutoCAD /AutoCAD LT Essentials training course is designed for those using AutoCAD or AutoCAD LT with a Windows operating system. This training

More information

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....

More information

Computer Aided Drafting and Design Competence

Computer Aided Drafting and Design Competence POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced

More information

Creo Parametric 4.0 Basic Design

Creo Parametric 4.0 Basic Design Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes

More information

Autodesk Inventor 2016

Autodesk Inventor 2016 Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Parametric Modeling with Creo Parametric 2.0

Parametric Modeling with Creo Parametric 2.0 Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Inventor 2016 Essentials Plus

Inventor 2016 Essentials Plus Autodesk NEW Features a chapter on sheet metal design Inventor 2016 Essentials Plus Daniel T. Banach & Travis Jones SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF

More information

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of

More information

AutoCAD 2018 Fundamentals

AutoCAD 2018 Fundamentals Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about

More information

Basic 2D drawing skills in AutoCAD 2017

Basic 2D drawing skills in AutoCAD 2017 Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.

More information

SolidWorks 2013 Part I - Basic Tools

SolidWorks 2013 Part I - Basic Tools SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

A Practical Guide to AutoCAD 2019

A Practical Guide to AutoCAD 2019 A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of

More information

Autodesk AutoCAD 2013 Fundamentals

Autodesk AutoCAD 2013 Fundamentals Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more

More information

AutoCAD 2020 Fundamentals

AutoCAD 2020 Fundamentals Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Computer Assisted Drafting (CAD) Level I & II

Computer Assisted Drafting (CAD) Level I & II Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,

More information

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad 1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work

More information

SOLIDWORKS 2018 Basic Tools

SOLIDWORKS 2018 Basic Tools SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Part I Introduction to CorelCAD

Part I Introduction to CorelCAD Table of Contents Part I Introduction to CorelCAD 1 Introducing CorelCAD for Mac... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.

Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I. Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA

More information

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents PART I INTRODUCTION TO CORELCAD.... 1 1 Introducing CorelCAD.... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2017 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation

More information

SolidWorks 2014 Part I - Basic Tools

SolidWorks 2014 Part I - Basic Tools SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

SOLIDWORKS 2016 Basic Tools

SOLIDWORKS 2016 Basic Tools SOLIDWORKS 2016 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Creo Revolve Tutorial

Creo Revolve Tutorial Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate

More information

SKKK 1021 Engineering Drawing

SKKK 1021 Engineering Drawing SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

SOLIDWORKS 2017 Basic Tools

SOLIDWORKS 2017 Basic Tools SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

SDC. Tutorial Guide to AutoCAD D Drawing, 3D Modeling. Table of Contents. Description

SDC. Tutorial Guide to AutoCAD D Drawing, 3D Modeling. Table of Contents. Description Tutorial Guide to AutoCAD 2018 2D Drawing, 3D Modeling Covers 2D drawing and 3D modeling Uses step-by-step tutorials and is written for novice users Organization that parallels an introductory engineering

More information

An Introduction to Dimensioning Dimension Elements-

An Introduction to Dimensioning Dimension Elements- An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements

More information

Chapter 6 Title Blocks

Chapter 6 Title Blocks Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

After completing this lesson, you will be able to:

After completing this lesson, you will be able to: LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a Circle using 6 different methods. 2. Create a Rectangle with width, chamfers, fillets and rotation. 3. Set Grids and Increment

More information

Parametric Modeling with

Parametric Modeling with Parametric Modeling with UGS NX 6 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Parametric Modeling with

More information

Auto-CAD 2005 Seminar DFTG 1091

Auto-CAD 2005 Seminar DFTG 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD 2005 Seminar DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS

More information

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...

More information

Drawing and Detailing with SolidWorks 2014

Drawing and Detailing with SolidWorks 2014 r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

Auto-CAD Complete DFTG 1091

Auto-CAD Complete DFTG 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD Complete DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS Auto-CAD

More information

Introduction to Creo Parametric 2.0

Introduction to Creo Parametric 2.0 Introduction to Creo Parametric 2.0 Overview Course Code Course Length TRN-3902-T 5 Days In this course, you will learn core modeling skills and quickly become proficient with Creo Parametric 2.0. Topics

More information

8 Working Drawings in AutoCAD

8 Working Drawings in AutoCAD 8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of

More information

**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB

**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB **IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB GETTING STARTED Step 1. Login to your COE account with

More information

Contents. Prologue 27. Chapter 1: Introducing AutoCAD 29 Introduction 30. Getting Started with the Set-Up 31

Contents. Prologue 27. Chapter 1: Introducing AutoCAD 29 Introduction 30. Getting Started with the Set-Up 31 vii Contents Prologue 27 Chapter 1: Introducing AutoCAD 29 Introduction 30 Downloading a Free Copy of AutoCAD 30 Getting Started with the Set-Up 31 Launching AutoCAD 31 The Welcome Screen 31 The Application

More information

AutoCAD Architecture 2014

AutoCAD Architecture 2014 CADLearning for AutoCAD Architecture 2014 Course Details 19+ hours of training 325 video tutorials Exercise files included Instructor: Reid Addis Course Description CADLearning for AutoCAD Architecture

More information

Copyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material

Copyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2008 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better

More information

Parametric Design 1

Parametric Design 1 Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students

More information

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

More information

Architecture 2012 Fundamentals

Architecture 2012 Fundamentals Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit

More information

Engineering & Computer Graphics Workbook Using SOLIDWORKS

Engineering & Computer Graphics Workbook Using SOLIDWORKS Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Dimensioning. Subject Matters:

Dimensioning. Subject Matters: Objectives: To define dimensioning. To recognise the different types of dimensions. To define and create a dimension style. To recognise the dimension toolbar and the dimensioning commands. To create dimensions

More information

Tutorial Guide to AutoCAD D Drawing, 3D Modeling

Tutorial Guide to AutoCAD D Drawing, 3D Modeling Tutorial Guide to AutoCAD 2019 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com For Microsoft Windows Powered by TCPDF (www.tcpdf.org)

More information

< Then click on this icon on the vertical tool bar that pops up on the left side.

< Then click on this icon on the vertical tool bar that pops up on the left side. Pipe Cavity Tutorial Introduction The CADMAX Solid Master Tutorial is a great way to learn about the benefits of feature-based parametric solid modeling with CADMAX. We have assembled several typical parts

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Assignment 12 CAD Mechanical Part 2

Assignment 12 CAD Mechanical Part 2 Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden

More information

Fundamentals III PROJECT EXERCISE

Fundamentals III PROJECT EXERCISE 4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. project EXERCISE

More information

Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Creo Parametric 1.0. for Engineers and Designers. CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.

Creo Parametric 1.0. for Engineers and Designers. CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim. Creo Parametric 1.0 for Engineers and Designers CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor Department of Mechanical

More information