SYLLABUS. Apprenticeship Training Scheme

Size: px
Start display at page:

Download "SYLLABUS. Apprenticeship Training Scheme"

Transcription

1 SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi

2 GENERAL INFORMATION Name of the Trade : CAD-CAM Operator-cum- Programmer N.C.O. Code No. : Entry Qualification : Passed 10 th class examination under 10+2 system of education or its equivalent. Duration of the Apprenticeship Training : 02 years Rebate allowed in Apprenticeship Training : One year and six months for trainees completed Broad Based Basic Training in Production and Manufacturing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in CAD/CAM. Ratio of apprentices to workers other than : 1:2 unskilled workers Course Outline : The training shall comprise of a) On the job training The actual training shall be dependend on the facilities available in the establishment, with an idea to expose the trainees to as many activities as possible. The trainees shall maintain a daily work dairy for on the job training, which shall be periodically authenticated by the supervisor. b) Project Each apprentice shall under take a project in any of the areas depending on her interest and facilities available in the establishment. The duration of the project shall be two Weeks.

3 Syllabus for the trade of CAD-CAM Operator-cum- Programmer under Apprenticeship Training Scheme List of the members present in trade committee meeting held on 13 th January 2007 at ITI, Aundh, Pune, Maharashtra S.No. Name and Designation Organisation 1. Shri Rajendra Gaikwad, Force Motors Ltd., Pune Specialist Engineer, R & D-HCV 2. Shri B.U.Bhandari, Works Manager TATA Motors, Pune 3. Col. U.G.Umrani, G.M. Maruti Suzuki

4 Syllabus for the trade of CAD-CAM Operator-cum- Programmer Under Apprenticeship Training Scheme S. Shop Floor Training No. 1 Installation and reinstallation of Software. 2 Installation of AutoCAD 2006 or latest. 3 Draw H,L,S,T and C, etc shapes with respective actual product of respective industry 4 Practice on draw Menu commands like Line, Circle, Polygon, Arc, Ellipse, Spline, MText etc 5 To draw simple figures using draw commands 6 Practice on different Dimensioning commands. 7 To draw Complex Orthographic Figures & Dimensioning them properly. 8 Practice on editing Commands Practice on View Commands. Practice on Formatting Commands & Drawing consisting of above commands. 9 Practice on Drafting settings. Insert different designs in drawing using Design Centre, Tool Pallets & drawing consisting of above commands. 10 Practice to draw Simple & Complex Isometric Drawings. 11 Practice to draw 3D like Box, Sphere, Cone, Wedge, Cylinder, etc. 12 To draw Simple & Complex 3D Solid Models. 13 Practice on Rendering commands. Plotting the 2D &3D Drawings. 14 Installation of Master CAM. Working on Master CAM. 15 To open & Save files. Importing & Exporting files in other formats. Changing units. 2D Creation commands. Create simple solids using line, circle, arc, fillet, chamfer, etc. commands. Practice on Modifying X-form Commands. Practice on dimension. Analyzing command. Working on levels & attributes. 16 Basic of G-View. C-Plane & construction depth. Basic of Wire frame modeling. Creating Box shape & creating different shapes in all the 6 faces. X-form translate join option. Exercise in wire frame modeling. 17 Surface Modeling Basics Flat boundary creation. Loft & Ruled surface creation, Revolve surface, Sweep surfaces, Net Surfaces, Offset Surfaces, etc. Editing & Trimming of surfaces. Creating curves, view Manipulation. Draw various jobs in Surface Modeling. 18 Practice on Solid Modelling commands like Extrude, Revolve, Sweep, Loft, Fillet & Chamfer. Solid editing Command. Solid to surface & surface

5 to solid conversion, solid manager. Solid editing & regeneration. Construct various solid objects. 19 Configuration & screen related commands, Machine type selection Machine definition & control definition. Job Setup. Basics of Milling. 20 2D Milling Commands like Facing, Contour, Pocket, Drilling, Engraving tool paths, Tool path manager & Tool path addition & modification. Back plotting, solid verification, Program Generation.Exercise on 2d Milling. 21 Creating simple to complex jobs operation by using all type of machine tools, preparation of part program for turning, milling & EDM wire cut, etc. 22 & 23 Practice on part programming by actual data transfer from computer to CNC MACHINE. Feedback from actual result, analysis of outcome & correction. 24 Use of Robotics on Man-less machines, preparation of part program or robotics machining, loading & unloading. 25 Project on CAD-CAM containing Solid/ Surface Modelling, Machining& CNC Interface. 26 Project on CAD-CAM containing Solid/ Surface Modelling, Machining &CNC Interface.

6 RELATED INSTRUCTIONS: 1) Introduction to computer peripherals & working on computer system. Study of system software, application software, operating system, concept of Graphical User Interface. Concept of CAD. Latest Software used or CAD. 2) Need & importance of AutoCAD. Comparison between conventional drawings. Drawings in AutoCAD, Features of AutoCAD. Latest versions of AutoCAD, advancement in versions. Hardware requirement for installing AutoCAD 2007 & Installation of CAD. 3) Study of U.C.S. co-ordinate system. i) Actual Cartesian System ii) Relative Cartesian System iii) Actual Polar System iv) Relative Polar System To draw H, L, S, T, C, etc. shapes using UCS Systems 4) Study to draw Menu commands like Line, Circle, Polygon, Arc, Ellipse, Polyline, Multi-line, Text. Study to draw figures using draw commands. 5) Study of Modify commands. Like Copy, Offset, Move, Array, Trim, Mirror, Extend, Rotate, Scale, Break, Fillet, Chamfer, Erase, etc. Study to draw simple figures like CAM, GASKET, etc. using modify commands. 6) Study of different Dimensioning Commands. Like Dim Style, Quick, Linear, Aligned, Radius, Diameter, Angular, Leader, Baseline, Continuous, Ordinate, Tolerance, Oblique, etc. Study to draw complex orthographic figures & dimensioning them properly. 7) Study of different editing Commands. Like Undo, Redo, Cut, Copy, Paste, Select all, etc. Study of different view commands like: Layers, line type, line weight, colors. Dimension Style, Units, Drawing Limits, etc. Study of Formatting Commands. 8) Study of Drafting settings like SNAP, GRID,ORTHO, POLAR, OSNAP, OTRACK, etc. Study of commands in Tools Menu like Inquiry, Design Centre, Tool Pallets, Options.

7 9) To draw Isometric Drawings. Settings required to draw Isometric Drawings. Concept of Isoplane, Isocircle. 10) Concept of 3D. Difference between 2D & 3D. Concept of Solid Modelling. Study to draw 3D like Box, Sphere, Cone, Wedge, Clinder,etc. 11) Study to create 3D solids by Extrude, Revolve command. Boolean commands like Union, Subtract, Intersect. 12) Rendering commands. Layouts & paper settings. Plotting the 2D& 3D Drawings 13) MasterCam Introduction MasterCam interface like Pull Down Menu & Icons, Auto Cursor & settings. General selection menu, Ribbon bar menu View manager, MRU (Most recently used functions) 14) Opening other CAD-CAM files in Master CAM & saving Master CAM files in other formats. Changing units 2D Creation commands. Create simple solids using line, circle, arc, fillet, chamfer, etc. commands. Modify objects using trim, fillet, chamfer, etc. commands. Delete & Undelete. Undo & Redo commands 15) X form commands like Translate, Rotate, Mirror, Offset, etc. Types of Dimensions. Types of Analyse commands. Levels & attributes. 16) Various G Views & C Planes. Basic of Wire frame modeling. How to use 6 faces of a box. How to create wire frame model. 17) Basics of Surface Modelling Various types of surfaces like Flat, Lofted, Revolve, Sweep and Net. Primitive Surfaces /Solids Editing & Trimming of surfaces Creating curves, view manipulation.

8 18) Various methods to draw solids like Cylinder, cube, cone, Prism, etc. Use of solid editing commands. Use of Extrude, Revolve, Sweep, Loft, Fillet & Chamfer How to convert Solid to surface & surface to solid. Solid Drafting options, Solid Manager 19) Use of screen related commands. Machine definition & control definition. Method of job setup. 20) Basics of Milling. Various types of 2D Milling Commands like Facing, Contour, Pocket, Drilling, Engraving, Milling tool paths & Tool path Manager Addition & Modification in tool path. Back plotting, solid verification, Program Generation. 21) Verification of solids & Programme Generation. Rough machining & finish machining Various combinations of tool paths. Concept of Wire EDM. 22) Turning basic set up of Job Tool Selection. Various Turning tool paths like Face Tool Path, Rough Turning, Finish Turning, Drilling, Groove tool Path.Editing of Tool Path, tool path Manager. 23) Introduction to Robotics. 24) Concept of Project. 25) Project Work.

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

More information

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment

More information

06/17/02 Page 1 of 12

06/17/02 Page 1 of 12 Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive

More information

Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

More information

Table of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements

Table of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction

More information

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer

More information

Mastering AutoCAD 2D

Mastering AutoCAD 2D Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust

More information

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT

More information

Computer Assisted Drafting (CAD) Level I & II

Computer Assisted Drafting (CAD) Level I & II Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad 1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS.   Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

More information

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

More information

First Level 2D Fundamentals

First Level 2D Fundamentals AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Applications in Technical Drawing

Applications in Technical Drawing Applications in Technical Drawing Objectives: To use drawing aids in orthographic projection. To recognise the use of construction line in orthographic projection. To locate points using OSNAP and OTRACK.

More information

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command. DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2

More information

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)

1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7) Higher National Unit specification General information Unit code: DW1E 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (August 2016) Unit purpose This

More information

Required Materials For complete material(s) information, refer to

Required Materials For complete material(s) information, refer to Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.

More information

Introduction to AutoCAD 2012

Introduction to AutoCAD 2012 Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The

More information

Release: 1. MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements

Release: 1. MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements Release: 1 MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements Modification History

More information

Principles and Practice:

Principles and Practice: Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

COURSE CONTENTS FOR THE AVTS COURSES

COURSE CONTENTS FOR THE AVTS COURSES Revision: 00 LEARNING CONTENT Page 1 of 14 COURSE CONTENTS FOR THE AVTS COURSES AT CAD- CAM LAB, ATI, VIDYANAGAR, HYDERABAD Revision: 00 LEARNING CONTENT Page 2 of 14 III COURSE CODE CAD-01 IV COURSE TITLE

More information

AutoCAD Essentials. Course Length: 3 days

AutoCAD Essentials. Course Length: 3 days AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD

More information

Introduction to AutoCAD 2012

Introduction to AutoCAD 2012 Page 1 Introduction to AutoCAD 2012 Alf Yarwood Chapter 12 Exercise 1 3. Click on Top in the ViewCube. 4. Call the Polyline tool from the Home/Draw panel and construct the pline outline. 5. Call the Polysolid

More information

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).

More information

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents PART I INTRODUCTION TO CORELCAD.... 1 1 Introducing CorelCAD.... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....

More information

Introduction to IntelliCAD 6

Introduction to IntelliCAD 6 Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD

More information

Part I Introduction to CorelCAD

Part I Introduction to CorelCAD Table of Contents Part I Introduction to CorelCAD 1 Introducing CorelCAD for Mac... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning. Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will

More information

COMPUTER PACKAGES II

COMPUTER PACKAGES II UNESCO-NIGERIA TECHNICAL & VOCATIONAL EDUCATION REVITALISATION PROJECT-PHASE II NATIONAL DIPLOMA IN COMPUTER TECHNOLOGY AUTOCAD DBMS DTP SPSS COMPUTER PACKAGES II COURSE CODE: COM 215 YEAR 2- SE MESTER

More information

Chapter 7 Isometric Drawings

Chapter 7 Isometric Drawings Chapter 7 Isometric Drawings In this assignment, we are going to look at creating isometric drawings with AutoCAD. These drawing appear to be three dimensional but they are not. An AutoCAD isometric drawing

More information

Auto-CAD 2005 Seminar DFTG 1091

Auto-CAD 2005 Seminar DFTG 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD 2005 Seminar DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS

More information

Isometric Circles and Arcs

Isometric Circles and Arcs AutoCAD and Its Applications BASICS Supplemental Material Chapter 4 Isometric Circles and Arcs On an isometric drawing, circles appear as ellipses and arcs as elliptical arcs. You must properly align isometric

More information

Auto-CAD Complete DFTG 1091

Auto-CAD Complete DFTG 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD Complete DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS Auto-CAD

More information

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation

More information

AutoCAD /AutoCAD LT Essentials

AutoCAD /AutoCAD LT Essentials AutoCAD /AutoCAD LT Essentials Course Length: 3 days The AutoCAD /AutoCAD LT Essentials training course is designed for those using AutoCAD or AutoCAD LT with a Windows operating system. This training

More information

Computer Aided Drafting and Design Competence

Computer Aided Drafting and Design Competence POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced

More information

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011 AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric

More information

Kankakee Community College

Kankakee Community College Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces

More information

Basic 2D drawing skills in AutoCAD 2017

Basic 2D drawing skills in AutoCAD 2017 Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.

More information

Mechanic Repair & Maintenance of Instrument used in Electrical Engineering

Mechanic Repair & Maintenance of Instrument used in Electrical Engineering Syllabus for the trade of Mechanic Repair & Maintenance of Instrument used in Electrical Engineering Under APPRENTICESHIP TRAINING SCHEME GOVERNMENT OF INDIA MINISTRY OF LABOUR & EMPLOYMENT (DGE&T) CENTRAL

More information

Under. Apprenticeship Training Scheme

Under. Apprenticeship Training Scheme SYLLABUS For the trade of COMPUTER AIDED PATTERN MAKER Under Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001

More information

AutoCAD LT 2010 Tutorial

AutoCAD LT 2010 Tutorial AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table

More information

CURRICULUM DOCUMENT FOR ADVANCE CERTIFICATE COURSE IN TOOL DESIGN & CAD/CAM

CURRICULUM DOCUMENT FOR ADVANCE CERTIFICATE COURSE IN TOOL DESIGN & CAD/CAM 2015 MSME TOOL ROOM INDO-GERMAN TOOL ROOM AURANGABAD- (MAHARASHTRA STATE) 1 GOVT. OF INDIA CURRICULUM DOCUMENT FOR ADVANCE CERTIFICATE COURSE IN TOOL DESIGN & CAD/CAM INDEX PART PARTICULARS PAGE NO. General

More information

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000

More information

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220 PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Fall 00 NOTE: This course is not

More information

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Introduction to ANSYS DesignModeler

Introduction to ANSYS DesignModeler Lecture 4 Planes and Sketches 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations

More information

Assignment 12 CAD Mechanical Part 2

Assignment 12 CAD Mechanical Part 2 Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden

More information

WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING

WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate

More information

Isometric Drawings. Figure A 1

Isometric Drawings. Figure A 1 A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an

More information

INTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing

INTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing INTRODUCTION to CAD ACAD BASICS 2.1 Starting with ACAD 2.2 Layout and sketching 2.3 Drawing environment 2.4 Elements of drawing 2.4.1 Draw commands 2.5 3D functions 2.6 Starting the drawing 2.6.1 Drawing

More information

Table of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7

Table of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10

More information

9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN

9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN SAULT STE. MARIE, ON SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : SEMESTER: I PROGRAM: ARCHITECTURAL TECHNICIAN INSTRUCTOR: H. PIETRZAKOWSKI

More information

Introduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW

Introduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW Emmett Wemp EDTECH 503 Introduction to Autodesk Inventor User Interface Fill in the blanks of the different tools available in the user interface of Autodesk Inventor as your instructor discusses them.

More information

A TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company

A TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California

More information

Dimensioning the Bracket Problem

Dimensioning the Bracket Problem C h a p t e r 11 Dimensioning the Bracket Problem In this chapter, you will learn the following to World Class standards: 1. Dimensioning a Multiple View Drawing 2. Placing Center Marks on a Multiple View

More information

Explanation of buttons used for sketching in Unigraphics

Explanation of buttons used for sketching in Unigraphics Explanation of buttons used for sketching in Unigraphics Sketcher Tool Bar Finish Sketch is for exiting the Sketcher Task Environment. Sketch Name is the name of the current active sketch. You can also

More information

AutoCAD D. Introduction to computer. Introduction to AutoCAD Screen Layout. Limits, Units Dsettings (Isoplane, Snap)

AutoCAD D. Introduction to computer. Introduction to AutoCAD Screen Layout. Limits, Units Dsettings (Isoplane, Snap) AutoCAD 2010 2D Introduction to computer Introduction to AutoCAD Screen Layout. Limits, Units Dsettings (Isoplane, Snap) Line,Circle,Arc, Erase, New, Open, Save, Save as Qnew Open Close Quit Polygon Move

More information

Computer Aided Draughting for Engineers

Computer Aided Draughting for Engineers Higher National Unit Specification General information for centres Unit title: Computer Aided Draughting for Engineers Unit code: DR1X 34 Unit purpose: This Unit has been designed to enable candidates

More information

Inventor 2016 Essentials Plus

Inventor 2016 Essentials Plus Autodesk NEW Features a chapter on sheet metal design Inventor 2016 Essentials Plus Daniel T. Banach & Travis Jones SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF

More information

An Introduction to Dimensioning Dimension Elements-

An Introduction to Dimensioning Dimension Elements- An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements

More information

Activity 5.2 Making Sketches in CAD

Activity 5.2 Making Sketches in CAD Activity 5.2 Making Sketches in CAD Introduction It would be great if computer systems were advanced enough to take a mental image of an object, such as the thought of a sports car, and instantly generate

More information

1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity

1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity Contents 2D Sketch... 1 1.1 2D Sketch Introduction... 1 1.1.1 2D Sketch... 1 1.1.2 Basic Setting of 2D Sketch... 2 1.1.3 Exit 2D Sketch... 4 1.2 Draw Common Geometry... 5 2.2.1 Points... 5 2.2.2 Lines

More information

for Solidworks TRAINING GUIDE LESSON-9-CAD

for Solidworks TRAINING GUIDE LESSON-9-CAD for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working

More information

SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Fundamentals III PROJECT EXERCISE

Fundamentals III PROJECT EXERCISE 4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. project EXERCISE

More information

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

LABORATORY MANUAL COMPUTER AIDED DESIGN LAB ME-211-F

LABORATORY MANUAL COMPUTER AIDED DESIGN LAB ME-211-F LABORATORY MANUAL COMPUTER AIDED DESIGN LAB ME-211-F List of Experiments:- Sl. No. Name of experiment Date Signature 01 02 Setting up of drawing environment by setting drawing limits, drawing units, naming

More information

Introduction to AutoCAD 2010

Introduction to AutoCAD 2010 Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 7 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso.dwt. 3. Call the

More information

EDUCATIONAL REND LAKE COLLEGE CAD INTRODUCTION TO COMPUTER-AIDED DRAFTING ISOMETRIC DRAWING REVISED: FALL 2010 INSTRUCTOR: THOMAS ARPASI

EDUCATIONAL REND LAKE COLLEGE CAD INTRODUCTION TO COMPUTER-AIDED DRAFTING ISOMETRIC DRAWING REVISED: FALL 2010 INSTRUCTOR: THOMAS ARPASI INSTRUCTOR: THOMAS ARPASI REND LAKE COLLEGE CAD 1201-51 INTRODUCTION TO COMPUTER-AIDED DRAFTING ISOMETRIC DRAWING 1 Pictoral Drawing Pictoral drawing have evolved from cave paintings to photorealistic

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

Isometric Drawing Chapter 26

Isometric Drawing Chapter 26 Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like

More information

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000

More information

Parametric Design 1

Parametric Design 1 Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students

More information

ENGINEERING DRAWING AM 09

ENGINEERING DRAWING AM 09 AM SYLLABUS (2014) ENGINEERING DRAWING AM 09 SYLLABUS 1 Engineering Drawing AM09 (Available in September) Syllabus Paper I (3 hrs) + Paper II (3 hrs) + coursework Aims The aims of the syllabus are to further

More information

COMPUTER AIDED ENGINEERING DRAWING

COMPUTER AIDED ENGINEERING DRAWING COMPUTER AIDED ENGINEERING DRAWING [As per Choice Based Credit System (CBCS) scheme] (Effective from the academic year 2017-2018) SEMESTER - I/II Subject Code 17CED14/17CED24 IA Marks 40 Number of Lecture

More information

SolidWorks 2014 Part I - Basic Tools

SolidWorks 2014 Part I - Basic Tools SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Teach Yourself UG NX Step-by-Step

Teach Yourself UG NX Step-by-Step Teach Yourself UG NX Step-by-Step By Hui Zhang Ph.D., P.Eng. www.geocities.com/zhanghui1998 Table of Contents Chapter 1 Introduction... 1 1.1 UG NX User Interface... 1 1.2 Solid Modeling Fundamentals...

More information

A Practical Guide to AutoCAD 2019

A Practical Guide to AutoCAD 2019 A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of

More information

and Engineering Graphics

and Engineering Graphics SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Parametric Modeling with Creo Parametric 2.0

Parametric Modeling with Creo Parametric 2.0 Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Introducing SolidWorks

Introducing SolidWorks Introducing SolidWorks SAAST Robotics 2008 SolidWorks Software Visually-based 3-D Mechanical design software Engineers and Designers use it to: Quickly sketch out ideas Experiment with features, dimensions

More information

Engineering & Computer Graphics Workbook Using SOLIDWORKS

Engineering & Computer Graphics Workbook Using SOLIDWORKS Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Software Development & Education Center NX 8.5 (CAD CAM CAE)

Software Development & Education Center NX 8.5 (CAD CAM CAE) Software Development & Education Center NX 8.5 (CAD CAM CAE) Detailed Curriculum Overview Intended Audience Course Objectives Prerequisites How to Use This Course Class Standards Part File Naming Seed

More information

ADA Curriculum for Pre-Engineering Students Correlation Guide

ADA Curriculum for Pre-Engineering Students Correlation Guide ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain

More information

SolidWorks 2013 Part I - Basic Tools

SolidWorks 2013 Part I - Basic Tools SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

2009 Academic Challenge

2009 Academic Challenge 2009 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Kevin Devine,

More information