Part I Introduction to CorelCAD

Size: px
Start display at page:

Download "Part I Introduction to CorelCAD"

Transcription

1 Table of Contents Part I Introduction to CorelCAD 1 Introducing CorelCAD for Mac... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface Drafting Tools Collaboration Flexible Viewing Organized Layouts Solid Modeling Application Programming Interfaces Platform....6 Language Support Demo Version How The Mac Version of CorelCAD Differs from Windows... 7 The Application Menu... 7 Missing from CorelCAD for Macintosh Application Programming Interfaces iii

2 iv Inside CorelCAD for Mac 2 A Quick Tour through CorelCAD Starting CorelCAD The CorelCAD Window Basic User Interface Tour The Crosshair Cursor and Other Cursors The Menu Bar Full Screen Editing Keyboard Shortcuts The Command Window...17 Palettes Tool Matrix Turning Off the CS Icon...26 Other UI Elements Online Help Exiting CorelCAD CAD Concepts Vector Entities Alternative Entity Specification Specifying Coordinates Keyboard Input Specifying Coordinates D Cartesian Coordinates D Cartesian Coordinates Polar Coordinates Cylindrical Coordinates Spherical Coordinates Point Filters Mouse Input Direct Distance Entry Status Bar Coordinates... 36

3 Contents v Snap Mode Grid Mode Ortho Mode Polar Mode ESnap Mode ETrack Mode Selecting Entities Grips Editing...40 Moving and Stretching with Grips Erasing with Grips Selecting Multiple Entities Selecting Multiple Entities by Rectangle Selecting Entities by Location Selecting Entities by Properties Command Compatibility with AutoCAD Compatibility with CorelCAD for Windows Macintosh Multi-touch Compatibility Part II 2D Architectural Drafting 4 Starting New Drawings Before You Begin Preparing CorelCAD for Drawing Starting CorelCAD With a New Drawing...51 Saving Drawings Setting the Units Limiting the Drawing Boundary Setting the Snap and Grid Snap Spacing Grid Spacing Turning Off the CCS Icon Seeing the Entire Drawing....60

4 vi Inside CorelCAD for Mac Adding Layers Naming Layers Automatic Backups Summary Drawing Walls Bringing Back the Office Drawing Drawing Walls Drawing Lines with Absolute Coordinates Drawing Lines with Relative Coordinates Using Entity Snaps Drawing Rectangles Drawing PolyLines Drawing Internal Walls Changing Layers Quickly Drawing Walls with RichLines Placing RichLines Zooming In and Out Defining RichLine Styles Erasing Entities Oops! Unerasing Entities Replacing RichLines Thickening Walls Changing the Lineweight Widening Polylines...97 Offsetting Lines Trimming Lines Summary Printing Drawings Printing the Office Drawing Draft Prints...107

5 Contents vii Presets Printing the Office Drawing Manually Printer Options Print Range Options How to Create and Print a Named View How to Print a Specified Window Print Scale Options How to Create a Custom Plot Scale Print Offset Print Style Print Options Export How to Export Drawings as Raster and Vector Files Saving Settings as Presets How to Save Print Settings OS X Options Previewing Before Printing Using Page Layouts with Drawings How to Create Page Layouts How to Borrow Page Layouts Assigning Print Styles Creating Print Styles Applying Print Styles All About Print Style Properties Summary Adding Symbols Drawing a Desk Symbol Drawing a Unit-size Desk Converting Symbols Into Blocks Inserting Blocks into Drawings Chair Block Rounding Corners Arms and Backs

6 viii Inside CorelCAD for Mac Making Window and Door Blocks Drawing Door Symbols Placing Furnishings Sourcing Blocks from the Internet Source of Blocks from Web Sites Downloading and Inserting Blocks Downloading Blocks Extracting Blocks From Drawings Export Block Summary Text and Attributes Placing Simple Text Settings Text Styles Editing Text Placing Paragraph Text Modifying Paragraph Text Facilities Management Stage 1: Defining Attributes Stage 2: Adding Attributes to Blocks Editing Attribute Data Stage 3: Extracting Attributes Opening the Data in a Spreadsheet Summary Placing Dimensions Linear Dimensions Horizontal Dimensions Vertical Dimensions Dimension Scale Dimensioning Entities Parallel Dimensioning

7 Contents ix Continued Dimensions Baseline Dimensions Radial Dimensions Diameter Dimensions Modifying Dimension Styles Summary Dimension Style Settings in CorelCAD Part III 3D Mechanical Design 10 Scan and Trace Importing Scanned Images About Path Types Examining the Attached Image Rotating Entities Scaling Entities Tracing Over Scanned Images Layers and Rectangles Drawing the Side View Drawing the Front View Chamfering Entities Drawing Linestyles Dual Dimensioning Summary Isometric Drafting Setting Up an Isometric Template Isometric Text Styles Isometric Dimension Styles

8 x Inside CorelCAD for Mac Drawing in Isometric Mode Drawing Isometric Boxes Drawing Irregular Boxes Placing Isometric Text Placing Isometric Dimensions Summary Solid Modeling Drawing 3D Solid Primitives Viewing in 3D Adding More Solids Extruding 2D Objects to Create Solids Drawing Cylinders Applying Boolean Operations Subtracting Solids Joining Solids Analyzing Solid Models Summary Multiple Viewports, Multiple Drawings Multiple Viewports Sheets Creating Additional Viewports Attaching Multiple Drawings Summary

9 Contents xi Part IV Appendices A Alphabetical Command Summary B Command Aliases Aliases Sorted by CorelCAD Command Name Aliases Sorted by Alias Name C Keyboard Shortcuts D Button Clicks & Double Clicks Mouse Buttons Double Click Actions

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents PART I INTRODUCTION TO CORELCAD.... 1 1 Introducing CorelCAD.... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....

More information

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Table of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements

Table of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9

More information

Introduction to IntelliCAD 6

Introduction to IntelliCAD 6 Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD

More information

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/

More information

Tutorial 2: Setting up the Drawing Environment

Tutorial 2: Setting up the Drawing Environment Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we

More information

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

CAD Orientation (Mechanical and Architectural CAD)

CAD Orientation (Mechanical and Architectural CAD) Design and Drafting Description This is an introductory computer aided design (CAD) activity designed to give students the foundational skills required to complete future lessons. Students will learn all

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

06/17/02 Page 1 of 12

06/17/02 Page 1 of 12 Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive

More information

AutoCAD Essentials. Course Length: 3 days

AutoCAD Essentials. Course Length: 3 days AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD

More information

Principles and Practice:

Principles and Practice: Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Required Materials For complete material(s) information, refer to

Required Materials For complete material(s) information, refer to Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.

More information

Section 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics

Section 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Section 1 Introduction and Review Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Drawing Assignments: NCAA Basketball Court Plot Style Table (Check-off)

More information

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning. Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will

More information

Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

More information

Mastering AutoCAD 2D

Mastering AutoCAD 2D Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust

More information

ACAD-BAU TUTORIAL For BricsCAD platform

ACAD-BAU TUTORIAL   For BricsCAD platform ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.

More information

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command. DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction

More information

**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB

**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB **IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB GETTING STARTED Step 1. Login to your COE account with

More information

A Practical Guide to AutoCAD 2019

A Practical Guide to AutoCAD 2019 A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of

More information

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS.   Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

More information

Contents. Prologue 27. Chapter 1: Introducing AutoCAD 29 Introduction 30. Getting Started with the Set-Up 31

Contents. Prologue 27. Chapter 1: Introducing AutoCAD 29 Introduction 30. Getting Started with the Set-Up 31 vii Contents Prologue 27 Chapter 1: Introducing AutoCAD 29 Introduction 30 Downloading a Free Copy of AutoCAD 30 Getting Started with the Set-Up 31 Launching AutoCAD 31 The Welcome Screen 31 The Application

More information

Introduction to AutoCAD 2012

Introduction to AutoCAD 2012 Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The

More information

Fine HVAC Quick Start Guide

Fine HVAC Quick Start Guide Fine HVAC Quick Start Guide 1. Installation Launching 2. CAD Environment 3. Calculation Environment Preface This Quick Start Guide provides a fast and friendly introduction on Fine HVAC main features

More information

Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS

Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS Autodesk AutoCAD 2012: Fundamentals Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Autodesk AutoCAD 2012: Fundamentals Lesson 3.0 Drawing

More information

AutoCAD LT 2010 Tutorial

AutoCAD LT 2010 Tutorial AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table

More information

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

More information

First Level 2D Fundamentals

First Level 2D Fundamentals AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

CAD for Maintenance Engineers

CAD for Maintenance Engineers Unit 32: Unit code CAD for Maintenance Engineers F/615/1501 Unit level 4 Credit value 15 Introduction There is a growing trend, in part due to the popularity of three-dimensional (3D) Computer Aided Design

More information

Assignment 12 CAD Mechanical Part 2

Assignment 12 CAD Mechanical Part 2 Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden

More information

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000

More information

Assignment 5 CAD Mechanical Part 1

Assignment 5 CAD Mechanical Part 1 Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started

More information

Assignment 6 CAD Mechanical Part 1 Editing Tools Objectives

Assignment 6 CAD Mechanical Part 1 Editing Tools Objectives Assignment 6 CAD Mechanical Part 1 Editing Tools Objectives In this assignment you will apply the explode and rectangular array commands, as well as skills learned in earlier assignments. Getting Started

More information

Symbols and Standards (Architectural CAD)

Symbols and Standards (Architectural CAD) Design and Drafting Description In this activity the teacher will give an orientation to the symbols and conventions of Architectural CAD. Industry common symbols are used for most of the fixtures and

More information

AutoCAD Architecture 2018 Fundamentals

AutoCAD Architecture 2018 Fundamentals Elise Moss Autodesk AutoCAD Architecture 2018 Fundamentals SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites

More information

AutoCAD /AutoCAD LT Essentials

AutoCAD /AutoCAD LT Essentials AutoCAD /AutoCAD LT Essentials Course Length: 3 days The AutoCAD /AutoCAD LT Essentials training course is designed for those using AutoCAD or AutoCAD LT with a Windows operating system. This training

More information

Autodesk AutoCAD 2013 Fundamentals

Autodesk AutoCAD 2013 Fundamentals Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more

More information

FineELEC Quick Start Guide

FineELEC Quick Start Guide FineELEC Quick Start Guide 1. Installation Launching 2. CAD Environment 3. Calculation Environment 2 Preface This Quick Start Guide provides a fast and friendly introduction on FineELEC, describing its

More information

SYLLABUS. Apprenticeship Training Scheme

SYLLABUS. Apprenticeship Training Scheme SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

AutoCAD 2018 Fundamentals

AutoCAD 2018 Fundamentals Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about

More information

Basic 2D drawing skills in AutoCAD 2017

Basic 2D drawing skills in AutoCAD 2017 Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.

More information

When you complete this assignment you will:

When you complete this assignment you will: Objjectiives When you complete this assignment you will: 1. Set-up menus and drawing for designing modeling problems. 2. become familiar with the Sketch menu tools and commands. 3. Produce a three-dimensional

More information

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT

More information

Zooming in on Architectural Desktop Layouts Alexander L. Wood

Zooming in on Architectural Desktop Layouts Alexander L. Wood December 2-5, 2003 MGM Grand Hotel Las Vegas Alexander L. Wood Code BD41-3L Take advantage of both AutoCAD and Autodesk Architectural Desktop Layout features. We'll look at the basics of setting up AutoCAD

More information

Autodesk AutoCAD Architecture 2015 Fundamentals

Autodesk AutoCAD Architecture 2015 Fundamentals Autodesk AutoCAD Architecture 2015 Fundamentals Elise Moss SDC P U B L I C AT I O N S Authorized Author Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the

More information

IN-CLASS DEMONSTRATION. Introduction to AutoCAD 2011 and 2-Dimensional Drawing

IN-CLASS DEMONSTRATION. Introduction to AutoCAD 2011 and 2-Dimensional Drawing IN-CLASS DEMONSTRATION Introduction to AutoCAD 2011 and 2-Dimensional Drawing GISC, UNIVERSITY OF CALIFORNIA BERKELEY LABORATORY GOALS In this module you will be introduced to the AutoCAD 2011 interface

More information

MEM30001B Computer Drafting Basics MEM30001A. Use computer aided drafting systems to produce basic engineering drawings.

MEM30001B Computer Drafting Basics MEM30001A. Use computer aided drafting systems to produce basic engineering drawings. MEM30001A Use computer aided drafting systems to produce basic engineering drawings. BlackLine Design Page 1 of 31 Table of Contents Conditions of Use:... 2 Unit Resource Manual... 2 Manufacturing Skills

More information

Come Back to the Other Side - AutoCAD for MicroStation Users

Come Back to the Other Side - AutoCAD for MicroStation Users 11/30/2005-8:00 am - 9:30 am Room:Peacock 2 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Come Back to the Other Side - AutoCAD for MicroStation Users Mark Mates - ProSoft GD31-2 This

More information

After completing this lesson, you will be able to:

After completing this lesson, you will be able to: LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a Circle using 6 different methods. 2. Create a Rectangle with width, chamfers, fillets and rotation. 3. Set Grids and Increment

More information

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).

More information

Autodesk Architectural Desktop Functionality for the Autodesk Building Systems User

Autodesk Architectural Desktop Functionality for the Autodesk Building Systems User 11/28/2005-1:00 pm - 2:30 pm Room:N. Hemispheres (Salon A1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Architectural Desktop Functionality for the Autodesk Building Systems

More information

AutoCAD 2020 Fundamentals

AutoCAD 2020 Fundamentals Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad 1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work

More information

9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN

9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN SAULT STE. MARIE, ON SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : SEMESTER: I PROGRAM: ARCHITECTURAL TECHNICIAN INSTRUCTOR: H. PIETRZAKOWSKI

More information

What is a Survey? The site plan is usually based on an professional land survey.

What is a Survey? The site plan is usually based on an professional land survey. Site Plan: Illustrates the existing natural and built features of a site and describes proposed construction in relation to the existing features. The site plan is essential for studying the influence

More information

Computer Assisted Drafting (CAD) Level I & II

Computer Assisted Drafting (CAD) Level I & II Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of

More information

Autocad Basics 7/28/2009. Chapter 14 - Learning Objectives

Autocad Basics 7/28/2009. Chapter 14 - Learning Objectives Chapter 14 - Learning Objectives Autocad Basics Chapter 14 July 28, 2009 Use grips to stretch, copy, move, rotate, scale, and mirror objects. Edit objects using the Quick Properties panel and the Properties

More information

Silhouette Connect Layout... 4 The Preview Window... 5 Undo/Redo... 5 Navigational Zoom Tools... 5 Cut Options... 6

Silhouette Connect Layout... 4 The Preview Window... 5 Undo/Redo... 5 Navigational Zoom Tools... 5 Cut Options... 6 user s manual Table of Contents Introduction... 3 Sending Designs to Silhouette Connect... 3 Sending a Design to Silhouette Connect from Adobe Illustrator... 3 Sending a Design to Silhouette Connect from

More information

GstarCAD Mechanical 2015 Help

GstarCAD Mechanical 2015 Help 1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols

More information

AutoCAD 2D I. Module 6. Drawing Lines Using Cartesian Coordinates. IAT Curriculum Unit PREPARED BY. February 2011

AutoCAD 2D I. Module 6. Drawing Lines Using Cartesian Coordinates. IAT Curriculum Unit PREPARED BY. February 2011 AutoCAD 2D I Module 6 Drawing Lines Using Cartesian Coordinates PREPARED BY IAT Curriculum Unit February 2011 Institute of Applied Technology, 2011 Module 6 Auto CAD Self-paced Learning Modules AutoCAD

More information

Kankakee Community College

Kankakee Community College Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces

More information

Chapter 2. Drawing Sketches for Solid Models. Learning Objectives

Chapter 2. Drawing Sketches for Solid Models. Learning Objectives Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation

More information

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

More information

Residential Design using AutoCAD 2007

Residential Design using AutoCAD 2007 Residential Design using AutoCAD 2007 Daniel John Stine SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Lesson 2 Crash Course Introduction (the Basics) This lesson

More information

Applications in Technical Drawing

Applications in Technical Drawing Applications in Technical Drawing Objectives: To use drawing aids in orthographic projection. To recognise the use of construction line in orthographic projection. To locate points using OSNAP and OTRACK.

More information

in the list below are available in the Pro version of Scan2CAD

in the list below are available in the Pro version of Scan2CAD Scan2CAD features Features marked only. in the list below are available in the Pro version of Scan2CAD Scan Scan from inside Scan2CAD using TWAIN (Acquire). Use any TWAIN-compliant scanner of any size.

More information

S206E Lecture 6, 5/18/2016, Rhino 3D Architectural Modeling an overview

S206E Lecture 6, 5/18/2016, Rhino 3D Architectural Modeling an overview Copyright 2016, Chiu-Shui Chan. All Rights Reserved. S206E057 Spring 2016 This tutorial is to introduce a basic understanding on how to apply visual projection techniques of generating a 3D model based

More information

Shades of Green. Using gcadplus for landscape design. Keith West, Sylvie Bion & Annette Tiemersma. gcad

Shades of Green. Using gcadplus for landscape design. Keith West, Sylvie Bion & Annette Tiemersma. gcad Shades of Green 50 Using gcadplus for landscape design Keith West, Sylvie Bion & Annette Tiemersma gcad + About the authors: Keith West is the founder of Design Cad, a software developer company based

More information

AutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods

AutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods AutoCAD Lab 1 Basics and Drawing Fundamentals EGS 1007 Engineering Concepts and Methods Will the Computer Ever REPLACE Pencil and Paper Drawings? Maybe someday When a computer becomes as light, small,

More information

CAD tutorial for the drinking straw support

CAD tutorial for the drinking straw support CAD tutorial for the drinking straw support Having tried a number of different designs, this one worked best on the greatest variety of glasses straight sided glass, angled glass and even a champagne flute.

More information

Introduction to ANSYS DesignModeler

Introduction to ANSYS DesignModeler Lecture 4 Planes and Sketches 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations

More information

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer

More information

SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Smart Architect Level 2 Training Guide drcauto

Smart Architect Level 2 Training Guide drcauto Smart Architect Level 2 Training Guide Smart Architect II Level 2 Training Guide by drcauto provides its express consent for this documentation or any part thereof, to be reproduced, photocopied,

More information

AutoCAD Tutorials. Content. Work space. Draw. Modify. Layer. Annotation. Block. Property. Utilities. Clip board. View.

AutoCAD Tutorials. Content. Work space. Draw. Modify. Layer. Annotation. Block. Property. Utilities. Clip board. View. AutoCAD Tutorials Content Work space Draw Modify Layer Annotation Block Property Utilities Clip board View Insert reference Area calculation Cutting sections Plot Import and export This Tutorial is formatted

More information

Parametric Drawing Using Constraints

Parametric Drawing Using Constraints CHAPTER 10 Parametric Drawing Using Constraints PROJECT EXERCISE This project exercise provides point-by-point instructions for creating the objects shown in Figure P10 1. In this exercise, you will apply

More information

Chapter 6 Title Blocks

Chapter 6 Title Blocks Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers

More information

Revit Structure 2013 Basics

Revit Structure 2013 Basics Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial

More information

From Raster to Vector: Make That Scanner Earn Its Keep!

From Raster to Vector: Make That Scanner Earn Its Keep! December 2-5, 2003 MGM Grand Hotel Las Vegas From Raster to Vector: Make That Scanner Earn Its Keep! Felicia Provencal GD31-2 This class is an in-depth introduction to Autodesk Raster Design, formerly

More information

Revit Structure 2014 Basics

Revit Structure 2014 Basics Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000

More information

Vectorworks / MiniCAD Tutorials

Vectorworks / MiniCAD Tutorials Vectorworks / MiniCAD Tutorials Tutorial 1: Construct a simple model of a little house Tutorial 2: Construct a 4 view Orthographic drawing of the Model These tutorials are available as Adobe Acrobat 4

More information