Inventor 2016 Essentials Plus

Size: px
Start display at page:

Download "Inventor 2016 Essentials Plus"

Transcription

1 Autodesk NEW Features a chapter on sheet metal design Inventor 2016 Essentials Plus Daniel T. Banach & Travis Jones SDC PUBLICATIONS Better Textbooks. Lower Prices.

2 Powered by TCPDF ( Visit the following websites to learn more about this book:

3 Table of Contents Introduction... vii Chapter 1 Getting Started... 1 Introduction... 1 Objectives... 1 Getting started with Autodesk Inventor... 2 User Interface... 2 Inventor Application Menu... 4 Ribbon... 5 Quick Access Toolbar... 6 Open Files... 7 New Files... 9 File Information Save File Options Application Options EXERCISE 1-1: USER INTERFACE Command Entry Help System Projects in Autodesk Inventor Autodesk Vault EXERCISE 1-2: PROJECTS Viewpoint Options Exercise 1-3: Viewing a Model CHECKING YOUR SKILLS Chapter 2 Sketching, Constraining, and Dimensioning Introduction Objectives Part and Sketch Application Options Units Templates Creating a Part File STEP 1 SKETCH THE 2D OUTLINE OF THE PART Exercise 2-1: Creating A Sketch With Lines exercise 2-2: creating a sketch with tangencies STEP 2 Constraining the Sketch Exercise 2-3: Adding and Displaying Constraints Step 3 Adding Dimensions Manually Exercise 2-4: Constraining and Dimensioning a Sketch... 74

4 Autodesk Inventor 2016 Essentials Plus Inserting AutoCAD Files Open Other File Types Exercise 2-5: Inserting AutoCAD Data Applying Your Skills CHECKING YOUR SKILLS Chapter 3 Creating and Editing Sketched Features Introduction Objectives Features Understanding the Browser Switching Environments Direct Manipulation Minimize Dialog Box Extrude a Sketch EXERCISE 3-1: Extruding a Sketch Linear Diameter Dimensions Revolve A Sketch Exercise 3-2: Revolving a Sketch Primitive Shapes/Features Secondary 2D Sketched Features Select Other-Face Cycling Slice Graphics Exercise 3-3: Sketch Features Editing a Feature and Sketch EXERCISE 3-4: EDITING FEATURES AND SKETCHES Projecting Geometry Exercise 3-5: Projecting Geometry Part Material, Properties and Appearance APPLYING YOUR SKILLS CHECKING YOUR SKILLS Chapter 4 Creating Placed Features Introduction OBJECTIVES Fillets Chamfers Exercise 4-1: Creating Fillets And Chamfers Holes Exercise 4-2: Creating Holes Shelling ii

5 Table of Contents Exercise 4-3: Shelling A Part Work Features Exercise 4-4: Creating Work Axes Exercise 4-5: Creating Work Planes And A UCS Patterns Exercise 4-6: Creating A Rectangular Pattern Exercise 4-7: Creating Circular Pattern Exercise 4-8: Creating a Pattern Along a Nonlinear Path D Printing Additive Manufacturing Applying Your Skills Checking Your Skills Chapter 5 Creating and Editing Drawing Views Introduction OBJECTIVES Drawing Options Creating a Drawing Drawing Sheet Preparation Creating Drawing Views Exercise 5-1: Creating A Multiview Drawing Exercise 5-2: Creating Auxiliary, Section, And Detail Views Exercise 5-3: Creating Break View Editing Drawing Views Exercise 5-4: Editing Drawing Views Annotations Exercise 5-5: Adding Centerlines Adding Dimensions to a Drawing View Exercise 5-6: Adding Dimensions Exercise 5-7: Creating Baseline Dimensions And Chain Dimensions Adding Text and Additional Symbols Exercise 5-8: Adding Annotations Exercise 5-9: Creating Hole Tables Shortcut For Opening Referenced Files Applying Your Skills Checking Your Skills Chapter 6 Creating and Documenting Assemblies INTRODUCTION OBJECTIVES Assembly Options Creating Assemblies iii

6 Autodesk Inventor 2016 Essentials Plus Adding Assembly Constraints Moving and Rotating Components Editing Assembly Constraints Exercise 6-1: Assembling Parts Assembly Joints Exercise 6-2: Assembly Joints Additional ASsembly Commands Adaptivity EXERCISE 6-3: Designing a Part in the Context of an Assembly Patterning Components Exercise 6-4: Patterning Components Analysis Commands Exercise 6-5: Analyzing An Assembly Driving a Constraint Exercise 6-6: Driving a Constraint Creating a Presentation File Exercise 6-7: Creating a Presentation View Creating Drawing Views from Assemblies and Presentation Files Bill of Material (BOM) Exercise 6-8: Editing a Bill of Material (BOM) Creating Balloons Parts List Exercise 6-9: Creating a Drawing from an Assembly APPLYING YOUR SKILLS CHECKING YOUR SKILLS Chapter 7 Advanced Modeling Techniques INTRODUCTION OBJECTIVES Dimension Display, Relationships, and Equations Parameters EXERCISE 7-1: Relationships and Paramters Sectioning a Part or Components in an Assembly Design View Representations in A Part or an Assembly File Emboss Text and Closed Profiles Exercise 7-2: Creating Text and Emboss Features Sweep Features Exercise 7-3: Creating Sweep Features D Sketching D Lines iv

7 Table of Contents Create a 3D Sweep Import Points Exercise 7-4: 3D Sketch Sweep Features COIL FEATURES Loft Features Exercise 7-5: Creating a Loft Feature Freeform Modeling Split a Part or Face Exercise 7-6: Splitting a Part Into Multiple Solid Bodies Mirror Features Suppressing Features Reordering A Feature Feature Rollback Content Center Introduction to Stress Analysis Exercise 7-7: Run a Stress Analysis On A Part Exercise 7-8: Run A Stress Analysis On An Assembly APPLYING YOUR SKILLS CHECKING YOUR SKILLS Chapter 8 Introduction to Sheet Metal Design INTRODUCTION OBJECTIVES Sheet Metal Design Creating a Sheet Metal Part Sheet Metal Environment Sheet Metal Defaults, Rules and Styles Exercise 8-1: Editing a Sheet Metal Style and Rule Face Contour Flange Flange Exercise 8-2: Creating Sheet Metal Parts Hem Bend Cut Fold Corner Round Exercise 8-3: Creating Bend, Cut, Hem and Fold Features Flat Pattern Detailing Sheet Metal Parts v

8 Autodesk Inventor 2016 Essentials Plus Exercise 8-4: Creating Flat Pattern and Documenting a Sheet Metal Part APPLYING YOUR SKILLS CHECKING YOUR SKILLS Index vi

Autodesk Inventor 2016

Autodesk Inventor 2016 Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn

More information

Inventor 2020 A Tutorial Introduction

Inventor 2020 A Tutorial Introduction Autodesk Inventor 2020 A Tutorial Introduction Includes video instruction L. Scott Hansen, Ph.D. SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE

More information

Autodesk Inventor Introduction to Solid Modeling

Autodesk Inventor Introduction to Solid Modeling Autodesk Inventor Introduction to Solid Modeling Course Length: 5 days The Autodesk Inventor Introduction to Solid Modeling training course provides you with an understanding of the parametric design philosophy

More information

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of

More information

Autodesk Inventor 6 Essentials Level II Course Outline

Autodesk Inventor 6 Essentials Level II Course Outline Autodesk Inventor 6 Essentials Level II Course Outline Overview This course outline is designed for a recommended three-day course for providing instruction on how to use the more advanced functionalities

More information

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS.   Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

More information

SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

ME Week 2 Project 2 Flange Manifold Part

ME Week 2 Project 2 Flange Manifold Part 1 Project 2 - Flange Manifold Part 1.1 Instructions This project focuses on additional sketching methods and sketching commands. Revolve and Work features are also introduced. The part being modeled is

More information

Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

CATIA V5 Workbook Release V5-6R2013

CATIA V5 Workbook Release V5-6R2013 CATIA V5 Workbook Release V5-6R2013 Richard Cozzens SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more

More information

Autodesk Fusion 360 Introduction to Parametric Modeling

Autodesk Fusion 360 Introduction to Parametric Modeling Autodesk Fusion 360 Introduction to Parametric Modeling Course Length: 5 days The Autodesk Fusion 360 Introduction to Parametric Modeling training course provides you with an understanding of the parametric

More information

and Engineering Graphics

and Engineering Graphics SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

ADA Curriculum for Pre-Engineering Students Correlation Guide

ADA Curriculum for Pre-Engineering Students Correlation Guide ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain

More information

Software Development & Education Center. Inventor 2013

Software Development & Education Center. Inventor 2013 Software Development & Education Center Inventor 2013 Autodesk Inventor Essential Objective To provide students with a thorough understanding of the principal 3D design, validation, and documentation processes

More information

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

More information

Learn Autodesk Inventor 2018 Basics

Learn Autodesk Inventor 2018 Basics Learn Autodesk Inventor 2018 Basics 3D Modeling, 2D Graphics, and Assembly Design T. Kishore Learn Autodesk Inventor 2018 Basics T. Kishore Hyderabad, India ISBN-13 (pbk): 978-1-4842-3224-8 ISBN-13 (electronic):

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Parametric Modeling with Creo Parametric 2.0

Parametric Modeling with Creo Parametric 2.0 Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Introduction to Creo Parametric 2.0

Introduction to Creo Parametric 2.0 Introduction to Creo Parametric 2.0 Overview Course Code Course Length TRN-3902-T 5 Days In this course, you will learn core modeling skills and quickly become proficient with Creo Parametric 2.0. Topics

More information

SolidWorks 2014 Part I - Basic Tools

SolidWorks 2014 Part I - Basic Tools SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

Teach Yourself UG NX Step-by-Step

Teach Yourself UG NX Step-by-Step Teach Yourself UG NX Step-by-Step By Hui Zhang Ph.D., P.Eng. www.geocities.com/zhanghui1998 Table of Contents Chapter 1 Introduction... 1 1.1 UG NX User Interface... 1 1.2 Solid Modeling Fundamentals...

More information

Creo Parametric 4.0 Basic Design

Creo Parametric 4.0 Basic Design Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes

More information

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Learning. Autodesk Inventor 2019 SDC. Modeling, Assembly and Analysis. Randy H. Shih. Better Textbooks. Lower Prices.

Learning. Autodesk Inventor 2019 SDC. Modeling, Assembly and Analysis. Randy H. Shih. Better Textbooks. Lower Prices. Learning Autodesk Inventor 2019 Modeling, Assembly and Analysis Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

SolidWorks 2013 Part I - Basic Tools

SolidWorks 2013 Part I - Basic Tools SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Up to Cruising Speed with Autodesk Inventor (Part 1)

Up to Cruising Speed with Autodesk Inventor (Part 1) 11/29/2005-8:00 am - 11:30 am Room:Swan 1 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Up to Cruising Speed with Autodesk Inventor (Part 1) Neil Munro - C-Cubed Technologies Ltd. and

More information

SOLIDWORKS 2017 Basic Tools

SOLIDWORKS 2017 Basic Tools SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.

Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I. Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA

More information

Beginner s Guide to SolidWorks Level I

Beginner s Guide to SolidWorks Level I Beginner s Guide to SolidWorks 2014 - Level I Parts, Assemblies, Drawings, PhotoView 360 and Simulation Xpress Videos Now includes SolidWorks training videos Alejandro Reyes MSME, CSWP, CSWI Multimedia

More information

SOLIDWORKS 2018 Basic Tools

SOLIDWORKS 2018 Basic Tools SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Creo Parametric 1.0. for Engineers and Designers. CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.

Creo Parametric 1.0. for Engineers and Designers. CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim. Creo Parametric 1.0 for Engineers and Designers CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor Department of Mechanical

More information

Parametric Design 1

Parametric Design 1 Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students

More information

Basic Course for Autodesk Inventor ebook

Basic Course for Autodesk Inventor ebook Armin Graef Basic Course for Autodesk Inventor 2016 - ebook Theory + Exercises Terms of Use and Copyright After downloading from the Internet, the ebook can be used in the following ways: either: belonging

More information

SOLIDWORKS 2018 Intermediate Skills

SOLIDWORKS 2018 Intermediate Skills SOLIDWORKS 2018 Intermediate Skills Expanding on Solids, Surfaces, Multibodies, Configurations, Drawings, Sheet Metal and Assemblies Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...

More information

CATIA Instructor-led Live Online Training Program

CATIA Instructor-led Live Online Training Program Course Outline Introduction & Understanding to CATIA Environment Introduction & Understanding to CATIA interface Starting new file Understand the Sketcher workbench of CATIA V5 Start a new file in the

More information

Introduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW

Introduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW Emmett Wemp EDTECH 503 Introduction to Autodesk Inventor User Interface Fill in the blanks of the different tools available in the user interface of Autodesk Inventor as your instructor discusses them.

More information

Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Module 2.1, 2.2 Review. EF101 Analysis & Skills Module 2.3. Sketched Features and Operations. On-line Help Two Locations

Module 2.1, 2.2 Review. EF101 Analysis & Skills Module 2.3. Sketched Features and Operations. On-line Help Two Locations EF101 Analysis & Skills Module 2.3 Engineering Graphics Revolved Features Placed Features Work Features Module 2.1, 2.2 Review What are the three types of operations for adding features to the base feature?

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

More information

Beginner s Guide to SolidWorks Level I

Beginner s Guide to SolidWorks Level I Beginner s Guide to SolidWorks 2013 - Level I Parts, Assemblies, Drawings, Simulation Xpress Alejandro Reyes MSME, CSWP, CSWI SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices.

More information

Principles and Practice:

Principles and Practice: Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Objectives. Inventor Part Modeling MA 23-1 Presented by Tom Short, P.E. Munro & Associates, Inc

Objectives. Inventor Part Modeling MA 23-1 Presented by Tom Short, P.E. Munro & Associates, Inc Objectives Inventor Part Modeling MA 23-1 Presented by Tom Short, P.E. Munro & Associates, Inc To demonstrate most of the sketch tools and part features in : Inventor Release 6 And, to show logical techniques

More information

TRAINING COURSE PROSPECTUS

TRAINING COURSE PROSPECTUS SOLIDWORKS Essentials Duration: Prerequisites: Description: The topics covered in this course are: 4 Days Mechanical design experience; experience with the Windows operating system SOLIDWORKS Essentials

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

Autodesk Inventor for Designers Release 5

Autodesk Inventor for Designers Release 5 Autodesk Inventor for Designers Release 5 Sham Tick ickoo oo Professor Department of Mechanical Engineering Technology Purdue University Calumet Hammond, Indiana U.S.A. CADCIM Technologies (www.cadcim.com)

More information

Parametric Modeling with

Parametric Modeling with Parametric Modeling with UGS NX 6 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Parametric Modeling with

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

SOLIDWORKS 2016 Basic Tools

SOLIDWORKS 2016 Basic Tools SOLIDWORKS 2016 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

NX 8.5 for Engineers and Designers

NX 8.5 for Engineers and Designers NX 8.5 for Engineers and Designers CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor Department of Mechanical Engineering

More information

Revit Structure 2014 Basics

Revit Structure 2014 Basics Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

SOLIDWORKS 2018 Intermediate Skills

SOLIDWORKS 2018 Intermediate Skills SOLIDWORKS 2018 Intermediate Skills Expanding on Solids, Surfaces, Multibodies, Configurations, Drawings, Sheet Metal and Assemblies Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

Contents at a Glance. Chapter 1 Getting Started 1. Chapter. Chapter 3 Sketch Techniques 69. Chapter 4 Basic Modeling Techniques 135

Contents at a Glance. Chapter 1 Getting Started 1. Chapter. Chapter 3 Sketch Techniques 69. Chapter 4 Basic Modeling Techniques 135 Contents at a Glance Introduction xxvii Chapter 1 Getting Started 1 Chapter 2 A Hands-on Test-Drive of the Workflow 43 Chapter 3 Sketch Techniques 69 Chapter 4 Basic Modeling Techniques 135 Chapter 5 Advanced

More information

Education Curriculum Combined Specialist

Education Curriculum Combined Specialist Education Curriculum Combined Specialist Invest your time in imagining next generation designs. Here s what we will teach you to give shape to your imagination. CATIA Combined Specialist Course CATIA Mechanical

More information

Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Computer Aided Design Parametric Modelling

Computer Aided Design Parametric Modelling Level: 2 Credit value: 10 Unit aim The use of computer aide design (CAD) systems in industry has become an essential part of the modern working environment. It is used at all stages of the design period,

More information

CATIA V5R20. for Engineers & Designers

CATIA V5R20. for Engineers & Designers CATIA V5R20 for Engineers & Designers Contributing Authors Sham Tickoo Professor Department of Mechanical Engineering Technology Purdue University Calumet Hammond, Indiana, USA D.Saravanan Sr. CAD Engineer

More information

Introducing SolidWorks

Introducing SolidWorks Introducing SolidWorks SAAST Robotics 2008 SolidWorks Software Visually-based 3-D Mechanical design software Engineers and Designers use it to: Quickly sketch out ideas Experiment with features, dimensions

More information

Engineering & Computer Graphics Workbook Using SOLIDWORKS

Engineering & Computer Graphics Workbook Using SOLIDWORKS Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Software Development & Education Center NX 8.5 (CAD CAM CAE)

Software Development & Education Center NX 8.5 (CAD CAM CAE) Software Development & Education Center NX 8.5 (CAD CAM CAE) Detailed Curriculum Overview Intended Audience Course Objectives Prerequisites How to Use This Course Class Standards Part File Naming Seed

More information

Quick Start for Autodesk Inventor

Quick Start for Autodesk Inventor Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow

More information

Computer Aided Drafting and Design Competence

Computer Aided Drafting and Design Competence POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced

More information

ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

More information

Assemble This! [Part 1]

Assemble This! [Part 1] 11/30/2006-3:00 pm - 4:30 pm Room:Marcello - 4401 (MSD Campus) Assemble This! [Part 1] Alan Kalameja - Trident Technical College and Kevin Robinson (Assistant); Patrik Chartrand (Assistant) MA34-1L This

More information

COURSE CONTENTS FOR THE AVTS COURSES

COURSE CONTENTS FOR THE AVTS COURSES Revision: 00 LEARNING CONTENT Page 1 of 14 COURSE CONTENTS FOR THE AVTS COURSES AT CAD- CAM LAB, ATI, VIDYANAGAR, HYDERABAD Revision: 00 LEARNING CONTENT Page 2 of 14 III COURSE CODE CAD-01 IV COURSE TITLE

More information

Autodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 1]

Autodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 1] 11/29/2006-3:00 pm - 4:30 pm Room:Marcello - 4404 (MSD Campus) Autodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 1] Daniel Banach - MasterGraphics MA24-2 Are you preparing to

More information

Getting Started. Chapter. Objectives

Getting Started. Chapter. Objectives Chapter 1 Getting Started Autodesk Inventor has a context-sensitive user interface that provides you with the tools relevant to the tasks being performed. A comprehensive online help and tutorial system

More information

COMPUTER AIDED ENGINEERING DESIGN (BFF2612) PART DESIGN Sketch Based Features

COMPUTER AIDED ENGINEERING DESIGN (BFF2612) PART DESIGN Sketch Based Features COMPUTER AIDED ENGINEERING DESIGN (BFF2612) PART DESIGN Sketch Based Features by Dr. Mohd Nizar Mhd Razali Faculty of Manufacturing Engineering mnizar@ump.edu.my MODELLING STRATEGIES Determine model type

More information

SOLIDWORKS Essentials

SOLIDWORKS Essentials SOLIDWORKS Essentials Length: 5 days Prerequisite: Mechanical design experience and experience with the Windows operating system. Description: SOLIDWORKS Essentials teaches you how to use SOLIDWORKS mechanical

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

PLTW IED MID TERM EXAM REVIEW Part A Multiple Choice

PLTW IED MID TERM EXAM REVIEW Part A Multiple Choice 2014-15 PLTW IED MID TERM EXAM REVIEW Part A Multiple Choice Directions: Select the letter of the response which best completes the item or answers the question. Then record your answer on the answer sheet

More information

Appendix R5 6. Engineering Drafting. Broken View

Appendix R5 6. Engineering Drafting. Broken View Updating Using Autodesk Inventor to Release 5 Appendix R5 6 Engineering Drafting Chapter 6 delineates the concepts of engineering drafting. You output orthographic views from solid parts and orthographic

More information

Here are the standard pre-requisites for the training course. Potential students should have or completed the following prior to the class:

Here are the standard pre-requisites for the training course. Potential students should have or completed the following prior to the class: Course: Solid Edge Fundamentals Duration: 5 days Version: ST8 At Course Completion Students will have learned how to utilize Solid Edge to design production level parametric (ordered) models of parts,

More information

Feature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05

Feature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05 Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05 Today s Objectives Feature-Based Modeling (comprised of 2 sections as shown below) 1. Breaking it down into features Creating

More information

Conquering the Rubicon

Conquering the Rubicon Autodesk Inventor R10 Fundamentals: Conquering the Rubicon Elise Moss SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Schroff Development Corporation P.O. Box 1334

More information

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored

More information

Essentials of SOLIDWORKS 2015 (4+ Days) * Ve-I Bonus! * File Management + SimulationXpress

Essentials of SOLIDWORKS 2015 (4+ Days) * Ve-I Bonus! * File Management + SimulationXpress Essentials of SOLIDWORKS 2015 (4+ Days) * Ve-I Bonus! * File Management + SimulationXpress Overview What is SOLIDWORKS? Interface Tour View Manipulation Provides some background info on the SOLIDWORKS

More information

AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.

AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here. AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and

More information

Sheet Metal OverviewChapter1:

Sheet Metal OverviewChapter1: Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements

More information

Autodesk Inventor. In Engineering Design & Drafting. By Edward Locke

Autodesk Inventor. In Engineering Design & Drafting. By Edward Locke Autodesk Inventor In Engineering Design & Drafting By Edward Locke Engineering Design Drafting Essentials Working Drawings: Orthographic Projection Views (multi-view, auxiliary view, details and sections)

More information

Sheet Metal OverviewChapter1:

Sheet Metal OverviewChapter1: Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Toothbrush Holder. A drawing of the sheet metal part will also be created.

Toothbrush Holder. A drawing of the sheet metal part will also be created. Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit

More information

Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece

Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece 1 Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece In this Module, we will explore the method of adding dovetail seams to curved edges such as the circumferential edge of a

More information

SOLIDWORKS 2016 Advanced Techniques

SOLIDWORKS 2016 Advanced Techniques SOLIDWORKS 2016 Advanced Techniques Mastering Parts, Surfaces, Sheet Metal, SimulationXpress, Top Down Assemblies, Core & Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2017 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Activity 5.5a CAD Model Features Part 1

Activity 5.5a CAD Model Features Part 1 Activity 5.5a CAD Model Features Part 1 Introduction In order to use CAD effectively as a design tool, the designer must have the skills necessary to create, edit, and manipulate a 3D model of a part in

More information

AutoCAD 2018 Fundamentals

AutoCAD 2018 Fundamentals Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about

More information

From the above fig. After sketching the path and profile select the sweep command First select the profile from property manager tree And then select

From the above fig. After sketching the path and profile select the sweep command First select the profile from property manager tree And then select Chapter 5 In sweep command there is a) Two sketch profiles b) Two path c) One sketch profile and one path The sweep profile is used to create threads springs circular things and difficult geometry. For

More information

First Level 2D Fundamentals

First Level 2D Fundamentals AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Introduction to Sheet Metal Features SolidWorks 2009

Introduction to Sheet Metal Features SolidWorks 2009 SolidWorks 2009 Table of Contents Introduction to Sheet Metal Features Base Flange Method Magazine File.. 3 Envelopment & Development of Surfaces.. 14 Development of Transition Pieces.. 23 Conversion to

More information

Model House Exercise-( Extrude)

Model House Exercise-( Extrude) -( Extrude) Prerequisite knowledge Focus of the lesson Commands Used This lesson requires an understanding of using the sketch commands including Inserting a new sketch Adding sketch geometry Understanding

More information

Table of Contents. Lesson 1 Getting Started

Table of Contents. Lesson 1 Getting Started NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

Lesson 10: Loft Features

Lesson 10: Loft Features 10 Goals of This Lesson Your students will be able to create the following part: profiles chisel This lesson plan corresponds to the Loft Features chapter of SolidWorks Getting Started. SolidWorks Student

More information

Drawing and Detailing with SolidWorks 2014

Drawing and Detailing with SolidWorks 2014 r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices

More information