Tutorial Guide to AutoCAD 2015

Size: px
Start display at page:

Download "Tutorial Guide to AutoCAD 2015"

Transcription

1 Tutorial Guide to AutoCAD D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices.

2 Powered by TCPDF ( Visit the following websites to learn more about this book:

3 ii Brief Table of Contents GS-1 Preparing for the Tutorials GS Solid Modeling for Section and Auxiliary Views 551 GS-2 AutoCAD Basics GS Rendering 569 GS-3 Studying for the AutoCAD Certification Exam G3-1 1 Introduction to the AutoCAD Software 1 2 Basic Construction Techniques 59 Glossary 607 AutoCAD Command Summary 621 Index Basic Editing and Plotting Techniques 95 4 Geometric Constructions Template Drawings and More Plotting D Orthographic Drawings Dimensioning Advanced Dimensioning Section and Auxiliary Views Blocks, DesignCenter, and Tool Palettes Introduction to Solid and Surface Modeling Changing and Plotting Solid Models Creating Assembly Dwgs from Solid Models 511

4 Table of Contents iii Table of Contents GS-1 Preparing for the Tutorials Introduction to the Tutorials GS1-1 GS1-1 Working with the Ribbon Working with Dialog Boxes GS2-11 GS2-12 Basic Mouse Techniques GS1-1 Accessing On-Line Help GS2-14 Objectives GS1-1 Working with Documents GS2-15 Recognizing Typographical Conventions GS1-2 Exiting an AutoCAD Session GS2-15 Creating a Working Directory Installing Data Files for the Tutorials Configuring AutoCAD for the Tutorials User Profiles Backing Up AutoCAD Defaults Customizable Support Files GS1-4 GS1-4 GS1-5 GS1-7 GS1-10 GS1-11 GS-3 Studying for the AutoCAD Exam G3-1 General Study Tips G3-1 Objectives G3-1 Exam Objectives G3-2 Certified Associate Exam Examples G3-2 GS-2 AutoCAD Basics Introduction Starting the AutoCAD 2015 Software Objectives Microsoft Windows Conventions Navigating in Windows Basic Elements of the AutoCAD Graphics Window Minimizing and Restoring an Application Microsoft Windows Multitasking Options AutoCAD Pointing Techniques Clicking Commands and Menu Options Entering Points Dragging Object Selection AutoCAD Commands and Options Typing Commands Switching the Workspace Using the Ribbon Backing Up and Backing Out of Commands Repeating Commands GS2-1 GS2-1 GS2-1 GS2-1 GS2-2 GS2-2 GS2-2 GS2-3 GS2-3 GS2-4 GS2-4 GS2-4 GS2-4 GS2-5 GS2-5 GS2-5 GS2-7 GS2-8 GS2-10 GS Introduction to the AutoCAD Software 1 Introduction 1 Starting 1 The AutoCAD Screen 1 Objectives 1 The Quick Access Toolbar 6 The Ribbon 6 Canceling Commands 9 Typing Commands 9 Dynamic Entry 10 Starting a New Drawing 12 Naming Drawing Files 13 Working with Multiple Drawings 14 Using Grid 16 Showing a Ribbon Panel 17 Using Zoom 18 Using Snap Mode 18 Drafting Settings 19 Using Line 20 Entering Coordinates 21

5 iv Table of Contents Using Absolute Coordinates 21 Drawing Using Grid and Snap 22 Using Last Point 22 Using Relative X- and Y-Coordinates 23 Using Polar Coordinates 23 Using Help 26 Using Save 28 Using Erase 28 Erasing with Window or Crossing 29 Using Undo 30 Using Redo 32 Drawing a Plot Plan 32 Setting the Units 33 Sizing Your Drawing 36 Using Limits 37 Using Rectangle 38 Drawing Circles 39 Adding Text 40 Copying Text 42 In Place Text Editing 43 Moving and Rotating Text 43 Setting the Text Style 44 Setting a Style Current 48 Using Mtext 48 Spell Checking Your Drawing 51 Saving Your Drawing 52 Transferring Files 53 Exercises 55 2 Basic Construction Techniques 59 Introduction 59 Starting 59 Opening an Existing Drawing 59 Objectives 59 Saving as a New File 61 Using Layers 62 Current Layer 62 Controlling Layers 63 Controlling Colors 64 Layer Visibility 65 Freezing Layers 66 Locking Layers 66 Making Object s Layer Current 67 Using Layer 68 Using Object Snap 71 Using Arc 74 Using Zoom 79 Using the Scroll Wheel to Zoom 83 Zoom Dynamic 83 Using Pan Realtime 84 Using Circle Options 85 Circle Tangent, Tangent, Radius 87 Using Ellipse 88 Exercises 91 3 Basic Editing and Plotting Techniques 95 Introduction 95 Starting 95 Starting from a Template Drawing 95 Objectives 95 Using Trim 97 Using Offset 100 Changing Object Properties 103 Using the Properties Panel 103 The Properties Palette 104 Using Fillet 106 Using Chamfer 107 Using Polyline 108

6 Table of Contents v Using Spline 111 Using Blend 112 Getting Information about Your Drawing 114 Using List 114 Locating Points 115 Measuring Geometry 115 Area 115 Using Multilines 116 The Plot Dialog Box 120 Exercises Geometric Constructions 133 Introduction 133 Starting 133 Setting the Units and Limits 133 Objectives 133 Drawing the Wrench 134 Using Copy Object 134 Effective Use of Layers 136 Changing Properties 138 Setting the Global Linetype Scaling Factor 139 Changing an Object s Linetype Scale 140 Using Polygon 142 Using Polar Tracking 144 Using Object Snaps 147 Showing a Floating Toolbar 147 Object Snap Overrides 148 More Object Snaps 153 Object Tracking 155 Using Break 155 Using Extend 157 Using Rotate 158 Using Move 159 Methods of Selecting Objects 159 Select Similar 161 Using Selection Filters 162 Using Quick Select 163 Creating the Geneva Cam 164 Using Construction Line (Xline) 166 Using Mirror 168 Using Array 170 Editing Associative Arrays 171 Making Changes using Grips 172 Noun/Verb Selection 175 Using the Path Array 176 Editing an Associative Path Array 178 Using 2D Parametric Constraints 181 Exercises Template Drawings and More Plotting 197 Introduction 197 Starting 197 Using a Standard Template 197 Objectives 197 Paper Space Layouts 199 Printer Area 200 Viewport 200 Switching to Model Space 202 Inserting an Existing Drawing 202 Showing the Drawing in the Layout 204 Setting the Viewport Zoom Scale 205 Using Pan to Position the Drawing 208 Locking the Viewport Scale 209 Creating a Second Floating Viewport 209 Making a Viewport Active 211 Attributes and Fields 213 Using Irregularly Shaped Viewports 215 Plotting from Paper Space 217

7 vi Table of Contents Sheet Sets 218 Creating a Template Drawing 224 Creating Default Layers 225 Using the Drafting Settings Dialog Box 233 Selecting the Default Text Font 234 Setting the Viewres Default 234 Switching to a Paper Space Layout 235 Adding a Title Block and Text to Paper Space 236 Sizing and Positioning the Drawing 266 Locking the Viewport Scale 267 Showing Holes 268 Drawing Centerlines and Centermarks 269 Breaking the Centerline 271 Setting the Global Linetype Scaling Factor 273 Projecting Slanted Surfaces on Cylinders 274 Exercises 278 Hide/Show Lineweight on Status Bar 237 Using Divide 238 Adding the Titles 239 Beginning a New Drawing from a Template Drawing 241 Changing the Title Block Text 242 Exercises D Orthographic Drawings 249 Introduction 249 The Front, Top, and Right-Side Orthographic Views 249 Objectives 249 View Location 250 Starting 250 Switching to Model Space 252 Deciding the Model Space Limits 252 Viewing the Model Space Limits 253 Using Ortho 253 Drawing Construction Lines 253 Hidden Lines 257 Drawing Hidden Lines 258 Line Precedence 260 Slanted Surfaces 261 Top-View to Side-View Projection 262 Drawing the Miter Line 263 Using Object Snap Tracking Dimensioning 283 Introduction 283 Terminology and Conventions 283 Objectives 283 Semiautomatic Dimensioning 284 Starting 285 Dimensioning a Shape 285 Using the DIM Layer 286 Dimension Standards 286 Associating Dimensions 286 Annotation Scaling 287 The Dimension Panel 288 Using Dimension Styles 288 Creating a Named Dimension Style 289 Scaling Dimension Features 290 Lines tab 290 Symbols and Arrows tab 292 Text tab 294 Fit Tab 295 Setting the Current Style 301 Checking Your Dimension Settings 302 Associative Dimensioning 303 Adding Dimensions to the Layout or the Model 303 Adding Linear Dimensions 304 Creating a Diameter Dimension 305

8 Table of Contents vii Baseline Dimensioning 307 Using Xplode 309 Adding Text with Special Characters 310 Using Quick Dimension 311 Saving As a Template 312 Dimensioning the Adapter 313 Using Continue Dimension 314 Angular Dimensions 315 Centering the Views 316 Adding the Tolerance Note 317 Updating Associative Dimensions 317 Using Stretch 318 Modifying Dimensions 319 Updating a Dimension Style 320 Changing the Drawing Scale 321 The Annotation Property 323 Synch the Annotative and Viewport Scales 324 Creating an Annotative Text Style 324 Exercises Advanced Dimensioning 331 Tolerance 331 Objectives 331 Tolerance Formats 332 Starting 333 Automatic Bilateral Tolerances 333 Using Limit Tolerances 340 Creating Feature Control Frames 342 Using Leader with Tolerances 346 Creating Datum Flags 348 Creating an Annotative Dimension Style 350 Exercises Section and Auxiliary Views 355 Introduction 355 Section Views 355 Objectives 355 Starting 357 Creating 2D Section Views 357 Cutting Plane Lines 358 Changing Hidden Lines to Visible 362 Using Hatch 363 Adding the Hatch Pattern 369 Creating the Side Section View 370 Solid Fill 373 Using Draworder 374 Changing Associative Hatches 375 Auxiliary Views 378 Drawing Auxiliary Views Using 2D 378 Aligning the UCS with the Angled Surface 380 Adding Visual Reference Lines 384 Linetype Conventions 384 Curved Surfaces 385 Drawing the Ellipse 390 Exercises Blocks, DesignCenter, and Tool Palettes 397 Introduction 397 Objectives 397 Starting 398 Using the Block Command 398 Inserting a Block 401 Using Explode 403 Using Write Block 404 Using DesignCenter and Tool Palettes 405 Drawing the Half-Adder Circuit 410 Using Donut 411

9 viii Table of Contents Freezing the TEXT2 Layer 412 Creating Object Groups 412 Creating Custom Interfaces 415 Creating a Toolbar 418 Using Special Characters in Programmed Commands 420 Exercises 425 Creating Solids by Revolution 465 Aligning the Views 465 Using the Boolean Operator Intersection 467 Dynamic UCS 470 Creating Surface Models 473 Using Loft Introduction to Solid & Surface Modeling 431 Introduction 431 Creating Mesh Models 476 Creating an Edge Mesh 478 Creating a Patch (SURFPATCH) 474 Objectives 431 Starting 432 The 3D Modeling Workspace 432 3D Coordinate Systems 433 Using the Steering Wheel 478 Creating a Network Surface 479 Creating 3D Mesh 481 Exercises 484 Creating 3D Objects 433 Setting the Viewpoint 434 User Coordinate Systems 438 The UCS Icon 439 Dynamic UCS System Variable 440 Using Layers 440 Creating Multiple Viewports 441 Viewports Using Different UCSs 445 Creating Cylinders 446 Selection Cycling 447 Setting Isolines 449 Building Complex Solid Models Changing and Plotting Solid Models 489 Introduction 489 Starting 489 Objectives 489 Using Fillet on Solids 490 Using Chamfer on Solids 490 Using Slice 491 Creating the Hole 498 Placing Views to Create a Drawing 500 Adding the Centerlines 504 Exercises 506 Using the Viewport Controls 451 Creating Wedges 452 Creating Cones 453 Creating User Coordinate Systems 454 Plotting Solid Models from Paper Space 457 Saving Your Multiview Setup as a Template 459 Creating Solid Models with Extrude and Revolve 460 Region Modeling 462 Extruding a Shape Creating Assembly Dwgs from Solid Models 511 Introduction 511 Attaching Solid Models 511 Objectives 511 Starting 512 Using External References 513 Layers and External References 515 Inserting the Solid Part Drawings 516

10 Table of Contents ix Checking for Interference 520 Determining Mass Properties (MASSPROP) 521 Creating an Exploded Isometric View 522 Creating a Dynamic Block for the Ball Tags 524 Defining Attributes 527 Defining the Parameters 531 Defining the Actions 532 Inserting the Ball Tags 534 Changing an Attribute Value 536 Changing an Externally Referenced Drawing 537 Creating the Parts List 539 Extracting Attribute Information 539 Advanced Render Settings 575 Adding Lights 581 Choosing Materials 585 Creating a New Material 587 Adjusting Mapping 590 Adding Backgrounds 591 Rendering to a File 592 Using Sun Properties 593 Geographic Location 593 Exporting AutoCAD Files 598 Drawing Web Format 600 Exercises 601 Exercises Solid Modeling for Section and Auxiliary Views 551 Introduction 551 Creating Sections from a Solid Model 551 AutoCAD Command Summary 621 Glossary 609 Objectives 551 Adding a Section View 554 Index 649 Using Section Plane 556 Using Live Section 557 Section Settings 558 Creating an Auxiliary View from a 3D Model 559 Orienting the View Point UCS 561 Using Plan 562 Using 3D Dynamic View 563 Exercises Rendering 569 Introduction 569 Starting 569 Objectives 569 The Render Panel 570

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

A TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company

A TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Principles and Practice:

Principles and Practice: Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

First Level 2D Fundamentals

First Level 2D Fundamentals AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

More information

06/17/02 Page 1 of 12

06/17/02 Page 1 of 12 Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive

More information

AutoCAD LT 2010 Tutorial

AutoCAD LT 2010 Tutorial AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table

More information

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment

More information

ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

More information

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS.   Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

More information

Mastering AutoCAD 2D

Mastering AutoCAD 2D Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust

More information

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

More information

Table of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements

Table of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9

More information

Required Materials For complete material(s) information, refer to

Required Materials For complete material(s) information, refer to Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.

More information

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation

More information

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning. Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will

More information

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Introduction to AutoCAD 2012

Introduction to AutoCAD 2012 Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction

More information

Introduction to IntelliCAD 6

Introduction to IntelliCAD 6 Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD

More information

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer

More information

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command. DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2

More information

SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

AutoCAD Essentials. Course Length: 3 days

AutoCAD Essentials. Course Length: 3 days AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD

More information

Autodesk Inventor 2016

Autodesk Inventor 2016 Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn

More information

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....

More information

Kankakee Community College

Kankakee Community College Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces

More information

and Engineering Graphics

and Engineering Graphics SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/

More information

Inventor 2016 Essentials Plus

Inventor 2016 Essentials Plus Autodesk NEW Features a chapter on sheet metal design Inventor 2016 Essentials Plus Daniel T. Banach & Travis Jones SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF

More information

ADA Curriculum for Pre-Engineering Students Correlation Guide

ADA Curriculum for Pre-Engineering Students Correlation Guide ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain

More information

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT

More information

AutoCAD /AutoCAD LT Essentials

AutoCAD /AutoCAD LT Essentials AutoCAD /AutoCAD LT Essentials Course Length: 3 days The AutoCAD /AutoCAD LT Essentials training course is designed for those using AutoCAD or AutoCAD LT with a Windows operating system. This training

More information

SYLLABUS. Apprenticeship Training Scheme

SYLLABUS. Apprenticeship Training Scheme SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

AutoCAD 2018 Fundamentals

AutoCAD 2018 Fundamentals Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about

More information

Computer Aided Drafting and Design Competence

Computer Aided Drafting and Design Competence POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced

More information

Creo Parametric 4.0 Basic Design

Creo Parametric 4.0 Basic Design Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes

More information

A Practical Guide to AutoCAD 2019

A Practical Guide to AutoCAD 2019 A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

AutoCAD 2020 Fundamentals

AutoCAD 2020 Fundamentals Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

SolidWorks 2013 Part I - Basic Tools

SolidWorks 2013 Part I - Basic Tools SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

SOLIDWORKS 2018 Basic Tools

SOLIDWORKS 2018 Basic Tools SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

SolidWorks 2014 Part I - Basic Tools

SolidWorks 2014 Part I - Basic Tools SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

Parametric Modeling with Creo Parametric 2.0

Parametric Modeling with Creo Parametric 2.0 Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2017 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Part I Introduction to CorelCAD

Part I Introduction to CorelCAD Table of Contents Part I Introduction to CorelCAD 1 Introducing CorelCAD for Mac... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

Basic 2D drawing skills in AutoCAD 2017

Basic 2D drawing skills in AutoCAD 2017 Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.

More information

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents PART I INTRODUCTION TO CORELCAD.... 1 1 Introducing CorelCAD.... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.

Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I. Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

SOLIDWORKS 2016 Basic Tools

SOLIDWORKS 2016 Basic Tools SOLIDWORKS 2016 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

SDC. Tutorial Guide to AutoCAD D Drawing, 3D Modeling. Table of Contents. Description

SDC. Tutorial Guide to AutoCAD D Drawing, 3D Modeling. Table of Contents. Description Tutorial Guide to AutoCAD 2018 2D Drawing, 3D Modeling Covers 2D drawing and 3D modeling Uses step-by-step tutorials and is written for novice users Organization that parallels an introductory engineering

More information

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000

More information

SOLIDWORKS 2017 Basic Tools

SOLIDWORKS 2017 Basic Tools SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad 1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

An Introduction to Dimensioning Dimension Elements-

An Introduction to Dimensioning Dimension Elements- An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements

More information

Computer Assisted Drafting (CAD) Level I & II

Computer Assisted Drafting (CAD) Level I & II Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation

More information

Drawing and Detailing with SolidWorks 2014

Drawing and Detailing with SolidWorks 2014 r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices

More information

Autodesk AutoCAD 2013 Fundamentals

Autodesk AutoCAD 2013 Fundamentals Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more

More information

**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB

**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB **IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB GETTING STARTED Step 1. Login to your COE account with

More information

SKKK 1021 Engineering Drawing

SKKK 1021 Engineering Drawing SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use

More information

Creo Revolve Tutorial

Creo Revolve Tutorial Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate

More information

Beginner s Guide to SolidWorks Level I

Beginner s Guide to SolidWorks Level I Beginner s Guide to SolidWorks 2014 - Level I Parts, Assemblies, Drawings, PhotoView 360 and Simulation Xpress Videos Now includes SolidWorks training videos Alejandro Reyes MSME, CSWP, CSWI Multimedia

More information

After completing this lesson, you will be able to:

After completing this lesson, you will be able to: LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a Circle using 6 different methods. 2. Create a Rectangle with width, chamfers, fillets and rotation. 3. Set Grids and Increment

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

Tutorial Guide to AutoCAD D Drawing, 3D Modeling

Tutorial Guide to AutoCAD D Drawing, 3D Modeling Tutorial Guide to AutoCAD 2019 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com For Microsoft Windows Powered by TCPDF (www.tcpdf.org)

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

Chapter 6 Title Blocks

Chapter 6 Title Blocks Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers

More information

Contents. Prologue 27. Chapter 1: Introducing AutoCAD 29 Introduction 30. Getting Started with the Set-Up 31

Contents. Prologue 27. Chapter 1: Introducing AutoCAD 29 Introduction 30. Getting Started with the Set-Up 31 vii Contents Prologue 27 Chapter 1: Introducing AutoCAD 29 Introduction 30 Downloading a Free Copy of AutoCAD 30 Getting Started with the Set-Up 31 Launching AutoCAD 31 The Welcome Screen 31 The Application

More information

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...

More information

Auto-CAD 2005 Seminar DFTG 1091

Auto-CAD 2005 Seminar DFTG 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD 2005 Seminar DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

Engineering & Computer Graphics Workbook Using SOLIDWORKS

Engineering & Computer Graphics Workbook Using SOLIDWORKS Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Revit Structure 2014 Basics

Revit Structure 2014 Basics Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

Auto-CAD Complete DFTG 1091

Auto-CAD Complete DFTG 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD Complete DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS Auto-CAD

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

8 Working Drawings in AutoCAD

8 Working Drawings in AutoCAD 8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of

More information

Parametric Modeling with

Parametric Modeling with Parametric Modeling with UGS NX 6 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Parametric Modeling with

More information

Tutorial Guide to AutoCAD D Drawing 3D Modeling SHAWNA LOCKHART SDC PUBLICATIONS. Schroff Development Corporation

Tutorial Guide to AutoCAD D Drawing 3D Modeling SHAWNA LOCKHART SDC PUBLICATIONS.  Schroff Development Corporation Tutorial Guide to AutoCAD 2011 2D Drawing 3D Modeling SHAWNA LOCKHART SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation INTRODUCTION 55 Basic Construction Techniques Introduction

More information

Introducing SolidWorks

Introducing SolidWorks Introducing SolidWorks SAAST Robotics 2008 SolidWorks Software Visually-based 3-D Mechanical design software Engineers and Designers use it to: Quickly sketch out ideas Experiment with features, dimensions

More information

CATIA V5 Workbook Release V5-6R2013

CATIA V5 Workbook Release V5-6R2013 CATIA V5 Workbook Release V5-6R2013 Richard Cozzens SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more

More information

Architecture 2012 Fundamentals

Architecture 2012 Fundamentals Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit

More information

Dimensioning. Subject Matters:

Dimensioning. Subject Matters: Objectives: To define dimensioning. To recognise the different types of dimensions. To define and create a dimension style. To recognise the dimension toolbar and the dimensioning commands. To create dimensions

More information

Introduction to Creo Parametric 2.0

Introduction to Creo Parametric 2.0 Introduction to Creo Parametric 2.0 Overview Course Code Course Length TRN-3902-T 5 Days In this course, you will learn core modeling skills and quickly become proficient with Creo Parametric 2.0. Topics

More information

Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models

Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models GEN20552-L Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models J.C. Malitzke Digital JC CAD Learning Objectives Learn how to create drawing views of AutoCAD 3D models for

More information

Autocad Basics 7/28/2009. Chapter 14 - Learning Objectives

Autocad Basics 7/28/2009. Chapter 14 - Learning Objectives Chapter 14 - Learning Objectives Autocad Basics Chapter 14 July 28, 2009 Use grips to stretch, copy, move, rotate, scale, and mirror objects. Edit objects using the Quick Properties panel and the Properties

More information

Beginner s Guide to SolidWorks Level I

Beginner s Guide to SolidWorks Level I Beginner s Guide to SolidWorks 2013 - Level I Parts, Assemblies, Drawings, Simulation Xpress Alejandro Reyes MSME, CSWP, CSWI SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices.

More information