40/10 SLIM Automatic horizontal sliding landing door

Transcription

1 Automatic horizontal sliding landing door Résidentiel DOC-FECMCBPSR00EN PRINTABE VERSION: ENG

2 Door configuration IFT APICATION Door cycles per year: Up to Traffic peak of the door: Up to 240 cycles per hour. Traffic lift speed: Up to 2, m/s. APICATION RANGE Opening Clear opening - Clear height - C2 - C4 T2 - T PANES Steel panels Glass panels Opening Metal sheet (1) Double skin Vision Gridded vision Wien type vision Bevel big vision Flush big vision Full glass Full glass built in moorings Full glass hidden trims Aluminium glass W C2 - C4 T2 - T3 NO F.R F.R. E120 (2) F.R. EW F.R. EW NO F.R NO F.R NO F.R (1) Solid execution option. (2) Execution with smoke seal protection available. F.R.: Fire rated according to EN Anti-trapping safety device option C2 Frame depth - Jamb J1 eader - D Jamb FRAMES DEFINITION Frame type Remarks STD MSS MV MSS M idden ateral covers Options Without extra-stroke MR Without lateral punching C2 only available with key in panel >120 + Δ10 >120 + Δ >120 + Δ10 >210 +Δ >120 + Δ10 - MSS MV: Frame without sill supplement with visible sill support. MSS M: Frame without sill supplement with hidden sill support. Without extra-stroke: Closing jamb without labyrinth. MR: Jamb ready for lift control cabinet in machine roomless installations. Available 1. Not available. Ask the commercial department. 1 Some option combinations may not be possible. 2

3 Door configuration FRAMES DETAI Frame type STD MSS MV MSS M idden Frame detail MSS MV: Frame without sill supplement with visible sill support. MSS M: Frame without sill supplement with hidden sill support. Type of sill Aluminium Reinforced aluminium SIS Steel Steel hidden Massive Profile detail Availability eated sill option Dust holes SI SUPEMENTS Type of supplement Aluminium Reinforced aluminium Steel Massive Profile detail Availability Opening C2 - C4 T2 - T3 EN 81-1/2 Safety rules STANDARDS EN EN EN Existing buildings Impaired Vandal resistance lifts : 20-2 : 40 - mobility Cat. I Cat. II EN Firefighters lifts EN 81-20/0 Safety rules Available 1. Not available. Ask the commercial department. 1 Some option combinations may not be possible. 3

4 Door configuration Opening C2 - C4 T2 - T3 IP21 IPX3 Protection against a solid Protected against sprays foreign body of 12, mm of water up to degrees or more in diameter and from the vertical. protected against vertically falling drops of water. PROTECTION IP4 Protection against dust and protected against water splashed from all directions. Magnetic contact Mechanical contact IP6 Sealed against dust and protected against jets of water from all directions. EEx Explosion proof, Group II (surface industries) and Category 2 (explosive atmosphere between 10 and hrs/yr). PANE REGUATION SUPPORT AND PANE GUIDE Type of panel regulation support Plus Type of panel guide Basic COMPATIBIITY AFO: MOTOR P min ±0 Case 40/10 PM SIM car door Coupling Symmetrical clutch Unlocking zone +183 / -177 Toe guard type Standard 26 Thickness 1 Range All P min: 46 mm for AFO - 19 mm and 1 mm for AFO - < 19 mm. T2 opening shown. If not otherwise indicated all dimensions in mm. Available 1. Not available. Ask the commercial department. 1 Some option combinations may not be possible. 4

5 Technical features T2 mechanism Noise level Total weight Safety closing system GENERA FEATURES < 3 db. Reference: T2 800 mm mm with sheet metal panels - 70 kg. With spring. INSTAATION Pre-adjusted and tested to simplify the installation. DP type DP* DOOR OISTWAY PROJECTION (DP) FIXING BRACKETS C2 C4 T2 T3 Bracket DP* Bracket DP* Bracket DP* Bracket X A 0 - X A 0 - X A 0-37, X A 2a ,6-90 W 2b 31 - X A W W D W V V V2 Bracket type A D V2 V8 W X Thickness 4 4 *See DP in sill detail (technical drawings pages).

6 Technical drawing 2 panel centre parting door mm sill S U MECANICA DETAIS Eccentric Ø 31 Concentric Ø 48 D thickness 3 SI DETAI DP (1) J1 DP (1) DP Upper bracket ower bracket Notes: 1 See DP details in technical features page. - If not otherwise indicated all dimensions in mm. Safety closing system Spring 6

7 Technical drawing 4 panel centre parting door mm sill 1, S 20 U MECANICA DETAIS , , Eccentric Ø 31 Concentric Ø 48 D thickness 3 SI DETAI DP (1) 0,7 + 0 J1 DP (1) DP Upper bracket ower bracket Notes: 1 See DP details in technical features page. - If not otherwise indicated all dimensions in mm. Safety closing system Spring 7

8 Technical drawing 2 panel side opening door mm sill 1, + 0 S - 20 U MECANICA DETAIS , DP (1) D Eccentric Ø 31 Concentric Ø 48 thickness 3 SI DETAI 1, + 40 J1 1 DP (1) DP Upper bracket ower bracket Notes: 1 See DP details in technical features page. - If not otherwise indicated all dimensions in mm. Safety closing system Spring 8

9 Technical drawing 3 panel side opening door 90 mm sill C S U MECANICA DETAIS D DP (1) K 1, Eccentric Ø 31 Concentric Ø 48 thickness 3 SI DETAI 0, J1 1 DP (1) C K 10 9, 10 7, 4, 0 DP Upper bracket ower bracket Notes: 1 See DP details in technical features page. - If not otherwise indicated all dimensions in mm. Safety closing system Spring 9

10 Contacts commerciaux Générale: Espagne: Brésil: Italie: France: Chine: Inde: Pologne: Allemagne: Fermator se réserve le droit de modifier les caractéristiques des produits présentés dans cette brochure.