Water based stains for interior

Transcription

1 Water based stains for interior Summary of the main products and paint systems Edition: January 2011

2 WATER BASED STAINS FOR INTERIOR Code /xx /xx Description and features WB STAIN SPECIAL EFFECT SPECIFIC SERIE FOR PINEWOOD AND FIR TO GET THE POSITIVE-NEGATIVE EFFECT UNIFORMING STAINS WB STAINS PROVIDED OF A GOOD UNIFORMING EFFECT. SUITABLE ON EVERY KIND OF WOOD. WB GLAZE /xx /xx /xxxx /xx SERIE OF GLAZES SUITABLE TO BE APPLIED ON ANY KIND OF WOODEN SUBSTRATES. THEY HAVE AN HIGH UNIFORMING POWER. WB PATINAS PATINAS SUITABLE TO CREATE THE ANTIQUE OR THE DECAPE EFFECT. WB ANTIQUE EFFECT PATINAS SPECIAL PATINE SUITABLE TO CREATE RUSTIC OR "ARTE POVERA" EFFECTS WB TRANSPARENT STAINS STAINS MARKED OUT BY AN HIGH TRANSPARENCYAND VERY HIGH COLORSTRENGHT

3 WB STAINS FEATURES /xx WB STAIN SPECIAL EFFECT SPECIFIC SERIE FOR PINEWOOD AND FIR TO GET THE POSITIVE-NEGATIVE EFFECT Preparation of the product PINE OR FIR MASSIVE WOODS OR VEENERS SANDING OF THE ROUGH WOOD WITH GRIT PAPER ADD THE STAINS /xx INTO THE BINDER UNTIL THE DESIRED SHADE AND CONCENTRATION IS REACHED. MANUAL OR AUTHOMATIC SPRAY WITH POLIURETHANE, NITRO OR PU ACRILICS /xx UNIFORMING STAINS WB STAINS PROVIDED OF A GOOD UNIFORMING EFFECT. SUITABLE ON EVERY KIND OF WOOD. MAINLY SUITABLE TO GET PASTEL TONES. EXCELLENT LIGHT RESISTANCE. MASSIVE WOODS OR VENEERS SANDING OF THE ROUGH WOOD WITH GRIT PAPER Preparation of the product DILUTION WITH WATER FROM 50% TO 100% ROLLER COATER (SUITABLE SOFT RUBBER ROLLERS OR SPONGE ROLLERS). DIPPING (MIXED WITH THE WB BINDER ). SPRAY: DILUTE WITH WATER: MIXING RATIO: FROM 1:1 (DARK COLOURS) TO 1:5 (LIGHT COLOURS). THE APPLICATION MAY BE DONE SOAKING THE SUBSTRATE IN A NORMAL WAY OR IN EXCESS AND, AFTER THAT, TAKING AWAY THE SURPLUS WITH RAGS. BESIDES THE WATER IT IS POSSIBLE TO USE THE BINDERS (TO GET A LOWER RAISING UP OF THE WOODEN HAIR) OR THE (TO GET A BETTER PORE MARKING. WITH NC, PU, PU ACRYLICS, UV OR WB SEALERS.

4 888.51/xx WB GLAZE SERIE OF GLAZES SPECIALLY SUITABLE TO CREATE RUSTIC OR "ARTE POVERA" EFFECTS. Altra voce Preparation of the product MASSIVE WOODS OR VENEERS (BEST CHOICE ARE POPLAR, TULIPIER E CHESTNUT) Altra voce SANDING OF THE ROUGH WOOD WITH GRIT PAPER DILUTION WITH WATER FROM 50% TO 200%. TO AVOID THE RAISING UP OF THE WOODEN HAIR IT MAY BE USED (INSTEAD OF THE WATER AND AT THE SAME PERCENTAGES)THE BINDER MANUAL OR AUTHOMATIC SPRAY IMMEDIATELY FOLLOWED BY WIPPING OPERATION. FOR ASSEMBLED FUR- NITURE, APPLY THE PRODUCT IN EXCESS: IN THIS WAY THE WIPPING OPERATION CAN BE DONE WITH A BETTER ACCURACY ON THE WHOLE SURFACE.. WITH NC, PU, PU ACRYLICS OR WB SEALERS /xx WB PATINAS PATINAS SUITABLE TO CREATE THE ANTIQUE OR THE DECAPE EFFECT.. Preparation of the product Removing operation MASSIVE WOODS OR VENEERS PRECOATED WITH CLEAR SEALER OR PIGMENTED PRIMERS. SAND WITH A GRIT PAPERS. FOR THE DECAPE EFFECT THE SEALER OR THE PRIMER MUST NOT BE SANDED. PATINAS MAY BE APPLIED AT THE DELIVERY VISCOSITY OR DILUTED WITH WATER FROM 10% TO 30%. IIT S POSSIBLE TO ADD FROM 3 TO 4% OF THE BINDER TO REDUCE THE REMOVAL EASINESS OF THE PATINA. IN THIS CASE THE ADHESION PROPERTY IMPROVES. MANUAL OR AUTHOMATIC SPRAY DEPENDING BY THE DRYING CONDITION ( ROOM TEMPERATURE, FORCED DRYING WITH WAR AIR, IRM LAMPS, ETC, ) PATINAS CAN BE REMOVED WITH STEEL WOOL ( T O CREATE THE ANTIQUE EFFECT ) OR WITH SCOTH- BRIGHT ( TO CREATE THE DECAPE' EFFECT ). WITH NC, PU, PU ACRYLICS, UV OR WB SEALERS

5 888.65/xxxx WB ANTIQUE EFFECT PATINAS SPECIAL PATINE SUITABLE TO CREATE RUSTIC OR "ARTE POVERA" EFFECTS TO APPLY ON SANDED SEALERS OR PRIMERS. MASSIVE WOODS OR VENEERS PRECOATED WITH 1 OR 2 COATS OF SANDED OR NOT SANDED SEALERS (PU, NC OR WB). SAND WITH A GRIT PAPERS. Preparation of the product DILUTION WITH WATER IN PERCENTAGES FROM 20% TO 100% SPRAY (IN EXCESS) WITH SUBSEQUENT WIPING BY RAGS OR BY PADS Removing operation REMOVE WITH THICK STEEL WOOL. THE REMOVING OPERATION MUST BE DONE QUITE COMPLETELY LEAV- ING SOME STORE IN THE DESIRED AREA. THE RULED EFFECT DEPENDS FROM THE KIND OF GRIT PAPER, STEEL WOOL OR SCOTH-BRIGHT USED. WITH NC, PU, PU ACRYLICS, UV OR WB SEALERS

6 888.91/xx /xx WB TRANSPARENT STAINS STAINS MARKED OUT BY AN HIGH TRANSPARENCYAND VERY HIGH COLORSTRENGHT. MAINLY USED WHEN THE USE OF WATER, LIKE REDUCED, IS NEEDED.. ROUGH MASSIVE WOODS, VENEERS AND TURNED WOODEN MATERIALS. SAND WITH A GRIT PAPERS. THE THINNING RATIO MAY CHANGE ACCORDING TO THE CONCENTRATION OF THE COLOUR TO APPLY: Preparation of the product 1:5 (DARK COLOURS) (TO REDUCE THE RISING UP OF THE WOODEN FIBRES) 1:30 (LIGHT COLOURS) FOR SPRAY APPLICATION DILUTE THE STAIN USING A BLEND OF WATER AND (TO SHORTEN THE DRYING TIME) IN THE RATIO OF 7:3 MAX OR CAN BE USED THE FOLLOWING BINDERS: (TO GET A BETTER PORE MARKING) O (FOR DIPPING APPLICATIONS, i.e. THE TINTING OF MASSIVE BEECH) SPRAY, DIPPING AND FLOW COATING WITH NC, PU, PU ACRYLICS, UV OR WB SEALERS

7 THINNERS CHARACTERISTICS Quickness FAST SLOW SERIE WATER /xx PC (1) C (1) PC (1) /xx PC (1, 2 and 3) C (1, 2 and 3) PC (1, 2 and 3) /xx PC (1, 2 and 3) C (1, 2 and 3) PC (1, 2 and 3) /xx PC (1) C (1) PC (1) /xx PC (1 and 2) C (1 and 2) PC (1 and 2) /xx PC (1, 2 and 3) C (1, 2 and 3) C (1, 2 and 3) Legenda: C = Compatible PC = Partially compatible upon mixing up with compatible thinners 1 = Spray 2 = Rag 3 = Roller BINDERS CHARACTERISTICS VISCOSITY LOW MEDIUM LOW MEDIUM HIGH LOW WIPING SUFFICIENT MEDIUM MEDIUM MEDIUM SUFFICIENT PORE MARKING LOW LIGHT MEDIUM HIGH LIGHT SERIE /xx /xx 1 1 and 2 1 and 2 1, 2 and 3 1, 2 and /xx 1 and 2 1 and 2 1 and 2 1, 2 and /xx /xx 1 and 2 1 and 2 1 and 2 1 and /xx and 2 1 and 2 1, 2 and 3 1, 2 and 4 Legenda: 1 = Spray 2 = Rag 3 = Roller 4 = Dipping or flow coating Note: The information reported here are not technical specifications. It s always recommended to read carefully the relevant technical data sheets where you will find full details about application and characteristics. For further information and in case of applications not covered by the technical data sheets please apply to our Technical Assistance Service. For health and safety information please refer to the relevant Safety Data Sheets

8 TIMBRO DEL RIVENDITORE Contacts: Commercial Office - Italy: Ufficio Commerciale Italia: Commercial Office - Export / ICD: Ufficio Commerciale Estero / ICD: Laboratory: Laboratorio: AkzoNobel Wood Finishes and Adhesives Akzo Nobel Coatings S.p.A. - Divisione Wood Via Spangaro, Peseggia di Scorzè (VE) - Italy T F info.pga@akzonobel.com