TECHNICAL CHARACTERISTICS. PRODUCT CHARACTERISTICS Easy to apply Excellent steam permeability Non-toxic to Humans and to the Environment Non-flammable

Transcription

1 Decorative Plasters

2 Excellent steam permeability The substrate should be well cleaned up and should have no grease on it. Two coats are applied. Primer DENEL ProFUNDIS, whereas the second coat is applied after drying up of the first coat. In this way good cohesion between the plaster and the substrate is achieved. The product is applied usually in three coats with plastering trowel for Venetian Plaster. 1. First coat - applied evenly and left to dry up for about hours. 2. Second coat - fine layer is applied at masks until completely smooth surface is achieved. The finished layer is left to dry up for approximately 6 8 hours. 3. Third coat - super fine masks are applied, whereat the surface is polished with the edge of plastering trowel or stainless steel spatula g/m 2 per layer. 5 kg / 20 kg. According to a catalogue. VENEZIANO VENEZIANO is plaster on acrylic substrate for interior decoration. Used to achieve marble effect in the various colour solutions. VENEZIANO emphasizes the individuality of each room, by creating a sense of style and comfort. The product satisfies both the classical and the most advanced creative ideas in terms of your interior. The product is non-flammable and non-toxic to humans and to the environment. PROTECTION The plaster is dried up completely in 4 days, after which DENEL ProGlacis (sealing surface layer) that makes it resistant to wash out. stainless steel Spatula or plastering Trowel from 10 C to 36 C (at relative humidity of the air not еxceeding 80%) 4 days (at temperature 20 C and relative humidity of 80%) 1650 kg/m 3 ± 3% CPS Brookfield (at temperature 25 C and rvt 20 vol./min) 1 2

3 Excellent steam permeability The substrate should be well cleaned up and should have no grease on it. Two coats are applied. Primer DENEL ProFUNDIS, whereas the second coat is applied after drying up of the first coat. In this way good cohesion between the plaster and the substrate is achieved. The product is applied usually in three coats with plastering trowel for Venetian Plaster. 1. First coat - applied evenly and left to dry up for about hours. 2. Second coat - fine layer is applied at masks until completely smooth surface is achieved. The finished layer is left to dry up for approximately 6 8 hours. 3. Third coat - super fine masks are applied, whereat the surface is polished with the edge of plastering trowel or stainless steel spatula g/m 2 for one layer. 5 kg / 20 kg. According to a catalogue. ARTIS Stucco Veneziano ARTIS is a decorative plaster on acrylic substrate, used to achieve nice marble effect more famous as Venetian Plaster. It is characterised with colour blending into one or close tonalities and has mild gleams of light on the surface. ARTIS is supplied on the market in rich colour palette. By means of the various colour solutions we can dip in the spirit of the tradition and jointly with this the decorated walls may have exclusively contemporary vision. The specific composition of the plaster allows to achieve easily both classical gloss surface and matt or lustreless surface. The skilful alternating and combination of surfaces with various degree of reflection of light contributes to the unique sense of grace and comfort. ARTIS has excellent adhesion to the substrate and is applied with minimal efforts. This quality makes it extremely valuable not only to master painters, but also to everyone who is willing to deploy his imagination. ARTIS emphasizes the individuality of each premise, by creating a sense of style and comfort by satisfying both the classical and the most vanguard creative ideas in terms of the interior. PROTECTION The plaster is dried up completely in 4 days, after which DENEL ProGLACIS (sealing surface layer) may be applied. 3 4 stainless steel spatula or plastering trowel from 10 C to 36 C (at relative humidity of the air not exceeding 80%) 4 days (at temperature 20 C and relative humidity of 80%) 1430 kg/m 3 ± 3% CPS Brookfield (at temperature 25 C and RVT 20 vol./min)

4 Steam permeability Resistance to wearing Before application the surface has to be cleaned up from dust and unattached particles. Two coats of DENEL ProFUNDIS are applied as primer (coloured in appropriate tonality), whereat the second coat is applied after drying up of the first layer. Metalico shall be applied evenly with a brush. Before drying up the material shall be structured by means of a brush and a paint pad, depending on the desired finishing effect g/m 2 5 kg / 15 kg. Specially developed tone card. METALLICO METALLICO is a decorative acrylate relief interior paint, distinguished with specific metallic brilliance. It is unique for decoration, which can be used also as additional effect to the other decorative plasters. It is appropriate for decorations both of home and of public buildings. In its composition besides surface processed silicates, it has quartz granulate with optimally selected granulometrics. Owing to the combination of quartz particles and glossy flakes original structure is achieved, emphasizing not only on the modern vision of the interior, but also on the personal creative individuality. It is applied extremely easily, it possesses excellent adhesion to the substrate and optimal balance between steam permeability and watertight. METALLICO contains acrylic resin, aluminium-silicate sealants and specific rheological additives. Tools for surface processing: Drying up time at touch: paint brush brush or paint pad from 10 C to 30 C (at relative humidity of the air not exceeding 80%) approximately 1,5 hours (at 20 C and relative humidity of the air of approx. 80%) 1 Day (at t=20 C and relative humidity of 80%) 1190 kg/m 3 ± 3% CPS Brookfield (at temperature 25 C and rvt 20 vol./min) 5 6

5 Adhesion to the place of application is perfect Optimal balance between steam-permeable and water resistance Resistant to abrasion The wall must be well puttied. Before application, the surface must be well cleaned from dust and not bonded particles. DENEL ProFUNDIS primer is to be applied twice before hand, and colored latex (in conformity with the color of the plaster). RECOMMENDATION The contents of the package must be well stirred before use. Environmental temperatures lower than 5 C and higher than 30 C are not suitable. After application, the tools must be immediately washed. In case of skin contact, the place must be immediately washed (although the substances contained in VELLUTO comply with all the sanitary safety and innocuousness standards, it will dry up and its removal will be difficult). The addition of other materials is inadmissible g/m 2 approx. (depending on the number of layers applied) 5 kg / 15 kg. Specially developed tone card. It must be applied using an inox trowel with smooth movements. The effect of different light refraction is achieved by the direction of movement of the trowel and the inequality of the strokes. This way, on the decorated surface shining and matt segments with velvet effect are alternating. VELLUTO VELLUTO is decorative plaster with the shining metallic surface with beautiful velvet effect. It is characterized by color transfusions to one or another close tonalities, accompanied by soft glares from surface-reflected light. VELLUTO Interior-decoration intended. By different color solutions, we can go deep to traditional spirit and, simultaneously, decorated walls shall have an extremely modern vision. Skilful intermittence and combination of different light-reflecting capacities shall contribute to an incomparable sense of elegance and comfort. Drying up time at touch: inox trowel from 10 C to 36 C (at relative humidity of the air not exceeding 80%) approximately 30 min (at temperature 20 C and relative humidity of 80%) 1 day (at t = 20 C and relative humidity 80% approx.) 1130 kg/m 3 ± 3% CPS Brookfield (at t = 25oC and RVT = 20 rev/min.) 7 8

6 Excellent steam permeability Resistant to wearing Before application the surface shall be cleaned up from dust and unattached particles. Two coats of DENEL ProFUNDIS are applied as primer, whereat the second coat shall be applied after drying up of the first layer. To be applied with plastering trowel in one layer. decoration After applying a layer with the desired thickness, the surface is processed by means of relief paint pad. After drying up of the applied layer, transparent tinted latex DENEL ProGLAZЕS is spread further on it, which is processed by means of plastic/ rubber raquel or sponge. 1,2 1,6 kg/m 2 depending on the thickness of the layer. 10 kg / 25 kg. White. RECOMMENDATION The container shall be shaken before use. Avoid working at temperatures lower than 5 C. After use the instruments are rinsed immediately. In case of contact with the skin immediately rinse thoroughly (despite that substances the used in TRAVERTINO comply with all sanitary and medical norms of safety, it dries up and its removal subsequently is impeded). No adding of any other materials is allowed. TRAVERTINO TRAVERTINО is a product developed with the objective of re-creating the external vision of the gem stone Travertine. It is applied extremely easily and provides opportunity for structuring whole walls or separate components. It possesses excellent adhesion to the substrate and good resistance to wearing, optimal balance between steam permeability and watertight. TRAVERTINО comprises specific plaster with interior and exterior implementation. It contains acrylic resin, inorganic sealants and specific rheological additives. The product is resistant to wearing, it is permeable to steam, odourless, non-toxic, non-flammable and safe to the humans and the environment. Drying up time at touch: plastering trowel from 10 C to 30 C (at relative humidity of the air not exceeding 80%) approximately 3 hours (at t=20 C and relative humidity of the air of approximately 80%) 1 day (at temperature 20 C and relative humidity of 80%) 1890 kg/m 3 ± 3% CPS Brookfield (at temperature 25 C and RVT 20 vol./min) 9 10

7 Adhesion to the place of application Optimal balance between steam-permeable and water resistance Resistant to wearing Variety of decorative techniques Before application the surface has to be cleaned up from dust and unattached particles. Two coats of primer DENEL ProFUNDIS are applied, then the second coat is applied after drying up of the primer paint coat. The application of ProANTICO shall be done evenly with a paint roller with long hair, brush or plastic plastering trowel. The thickness of the applied paint layer is determined by the selected secondary technique for decoration. Before drying up the material is processed with various instruments according to the desired effect of the finish. ADDITIONAL DECORATION After drying up of the applied primer layer, on the decorated surface can be applied further latex for interior. To achieve rustic effect on the surface is applied transparent tinted latex DENEL ProGLAZЕS g/m 2 in case of single coat application (depending on the relief) 5 kg / 15 kg. White. ANTICO ANTICO is a relief plaster, intended to be used in interior solutions. The original relief, which is achieved resembles the walls of antique building or the simple beauty of velvet fabrics. ANTICO emphasizes the individuality of each room, by creating a sense of uniqueness and comfort. The product satisfies both the classical and the most advanced creative ideas in terms of your interior. The specific composition of the product makes it appropriate for decoration both of the home and public buildings (offices, hotels, business centres, restaurants, salons, etc.). It is applied extremely easily and provides opportunity for structuring whole walls or separate components. ANTICO has excellent adhesion to the substrate and high resistance to wearing, optimal balance between steam permeability and watertight. It provides the opportunities to use large variety of decorative techniques. Contains acrylate resin, calciummagnesium aluminium-silicate sealants and specific rheological additives. It is applied with brush or paint roller, after which it undergoes secondary processing with a paint pad or plastic plastering trowel. Tools for surface processing: Drying up time at touch: paint brush or paint roller with medium length hair paint pad, plastic plastering trowel, etc. from 10 C to 30 C (at relative humidity of the air not exceeding 80%) 3 hours (at temperature 20 C and relative humidity of the air of app. 80%) 7 days (at temperature 20 C and relative humidity of 80%) 1240 kg/m 3 ± 3% CPS Brookfield (at temperature 25 C and RVT 20 vol./min) 11 12

8 The wall should be well plastered. Apply two layers of primer DENEL ProFUNDIS, the second layer is applied after drying of the first layer. Apply with stainless steel trowel to smooth or embossed layer thickness 1-3 mm. RECOMMENDATION The contents of the package must be well stirred before use. Optimum temperature range for application 18 C - 30 C. In case of contact with the skin immediately rinse thoroughly (despite that substances the used in COLORISSIMO comply with all sanitary and medical norms of safety, it dries up and its removal subsequently is impeded). No adding of any other materials is allowed. 0,8 1 kg/m 2, depending on the thickness of the layer. 5 kg / 15 kg. According to a catalogue. COLORISSIMO COLORISSIMO is decorative structured fine plaster on acrylic substrate, characterized by specific shining holographic effect. COLORISSIMO is suitable for both interior and exterior decoration. COLORISSIMO emphasizes the individuality of each room, by creating a sense of uniqueness and comfort. The specific composition of the product makes it appropriate for decoration both of the home and public buildings (offices, hotels, business centres, restaurants, salons, etc.). It is applied extremely easily and provides opportunity for structuring whole walls or separate components. Aspect: stainless steel spatula or plastering trowel Homogeneous pasty mixture ph 6,6 7, kg/m 3 ± 3% 13 14

9 DENEB Shop and Office: 1756 Sofia 115 Sv. Kliment Ohridski Blvd. tel.: fax: info@denel.bg