GCSE Product Design. Manipulative Skills (Part of section 2).
|
|
- Tracy Kennedy
- 5 years ago
- Views:
Transcription
1 Name - Check List When task is completed, photographed & notes written tick off the task. All tasks this week will be demonstrated to you. If you get stuck ask! GCSE Product Design. Manipulative Skills (Part of section 2). Veneering Where it fits into your coursework. Spray Paint Wood Dye Transferring an image onto wood. Wood Finishes Sublimation printing onto wood. Sublimation Printing onto plastic. Polyfusion. Laser Spray Etching. Cardboard. Wooden Base. Plastic Finishes Modeing.
2
3
4
5
6
7
8 Following the following steps to produce your initial model to be used in your materials/finishes research. To showcase a variety of finishing and material techniques you will be testing four different types. Photographs will be taken and annotation will need to be added also explaining your findings. - On a piece of A4 paper I would like you to draw a shape. This should be approximately half the size of the sheet. - Once drawn show me the shape to determine whether it is large enough. - This then needs to be cut out using a pair of scissors and this creates your template. 1 Spray Paint The tests you will carry out will be: 2 Wood Varnish 3 Coloured wood stain 4 Bees wax - Then take your template a draw around it carefully on your piece of MDF. - Once drawn put the piece of MDF into a vice and use a coping saw to cut it out. - Once cut out use sand paper/belt sander and a file to shape and finish the base. - Once sanded to finish you will then need to apply sand and sealer. - The above process will be repeated three times. - Once sanded off, primer needs to be applied. - Then a choice of spray paint can be evenly added.
9 Check List When task is completed, photographed & notes written tick off the task. Name -, face mask, ventilation on. Veneering. Spray Paint. Wood Dye. Veneering Spray Paint Wood Dye Transferring an image onto wood. Wood Finishes Sublimation printing onto wood. Q Would you use this on your lighting product? & if so which part? & if not why not? Q Would you use this on your lighting product? & if so which part? & if not why not? Q Would you use this on your lighting product? & if so which part? & if not why not?
10 Name - Check List When task is completed, photographed & notes written tick off the task. Transferring an image onto wood. Sublimation Printing onto Wood. Veneering Spray Paint Wood Dye Transferring an image onto wood. Wood Finishes Sublimation printing onto wood. Q Would you use this on your lighting product? & if so which part? & if not why not? Q Would you use this on your lighting product? & if so which part? & if not why not?
11 Name - Check List When task is completed, photographed & notes written tick off the task., face mask, ventilation on. Sublimation onto Plastic. Polyfusion. Laser Spray Etching. Sublimation Printing onto plastic. Polyfusion. Laser Spray Etching. Plastic Finishes Q Would you use this on your lighting product? & if so which part? & if not why not? Q Would you use this on your lighting product? & if so which part? & if not why not? Q Would you use this on your lighting product? & if so which part? & if not why not?
12 Name - Check List When task is completed, photographed & notes written tick off the task. Cardboard Modelling. Wooden Base Modelling. Cardboard. Wooden Base. Modeing. Q Would you use this on your lighting product? & if so which part? & if not why not? Q Would you use this on your lighting product? & if so which part? & if not why not?
13 Notes Page. Please use this page to write any additional notes which will help you with your type up. Check List When task is completed, photographed & notes written tick off the task. Veneering Spray Paint Wood Dye Transferring an image onto wood. Wood Finishes Sublimation printing onto wood. Sublimation Printing onto plastic. Polyfusion. Laser Spray Etching. Cardboard. Wooden Base. Plastic Finishes Modeing.
Understanding Standards
Understanding Standards Support pack for National course assessment C819 75 Design and Manufacture (National 5) assignment Identifier: ABCDEFG/2017 This edition: December 2017 The information in this publication
More information2013 SKILLS CANADA NATIONAL COMPETITION
2013 SKILLS CANADA NATIONAL COMPETITION CAR PAINTING 36 PROJECT INSTRUCTION POST SECONDARY Car Painting Total Time allocated: 12 hours FENDER PROJECT You will prime and paint a fender laser red tri- coat,
More information2013 SKILLS CANADA NATIONAL COMPETITION
2013 SKILLS CANADA NATIONAL COMPETITION CAR PAINTING 36 PROJECT INSTRUCTION SECONDARY Car Painting Total Time allocated: 12 hours FENDER PROJECT You will prime and paint a fender, as if it is a used OEM
More informationRobert Bosch GmbH. Minimalist washstand
Minimalist washstand Neat and tidy Minimalist washstand Minimalist design in the bathroom is in fashion. And rightly so, as this washstand proves: because less is more! 1 Introduction Here s an idea to
More informationRobert Bosch GmbH. Lounge light fixture
Lounge light fixture Nice and relaxing Lounge light fixture Light has an important effect on mood. This cool light fixture is perfect for creating a cosy lounge atmosphere. 1 Introduction This cool light
More informationArchitecture and Colour
Architecture and Colour Copies of architectural drawings and maps of the Bridgewater Canal Selection of Watercolour pencils Pots of water This activity is about shape and colour, linking in the shapes
More informationSTONEYBRIDGE STRUCTURES
02-208-OO North Eastern Railway N2 Style Signal Box INTRODUCTION Thank you for purchasing one of our products. We hope this information sheet will prove useful in the construction of this model. We have
More informationRepainting Instruction for Cosmetic Plastic Cover
Repainting Instruction for Cosmetic Plastic Cover 2014-09-22 1 (14) Repainting Instruction Repainting Instruction for Cosmetic Plastic Cover Repainting Instruction for Cosmetic Plastic Cover 2014-09-22
More informationRENOVATING WOOD. 2 - Planning your work
RENOVATING WOOD Renovating wood is not difficult, but it does require patience and application. Don't be tempted to work on fine or antique furniture - leave that to the experts! Always wear a face mask
More informationGCSE Bitesize Examinations. General Certificate of Secondary Education. Design and Technology Resistant Materials Mark Scheme.
GCSE Bitesize Examinations General Certificate of Secondary Education Design and Technology Resistant Materials Mark Scheme Total marks: 85 Question 1 One for each source and one for each explanation.
More information*0600/401* 0600/401. CRAFT AND DESIGN STANDARD GRADE Foundation Level. Fill in these boxes and read what is printed below. Full name of centre
FOR OFFICIAL USE F 6/4 NATIONAL QUALIFICATIONS 28 WEDNESDAY, 4 MAY 9. AM. AM Total CRAFT AND DESIGN STANDARD GRADE Foundation Level Fill in these boxes and read what is printed below. Full name of centre
More informationAfter printing these plans, several pages will need to be taped together to form a larger plan. Below is a diagram of which pages need assembled.
Watermill Building Plans For complete building instructions and instructional videos, please visit the main web site at www.hirstarts.com/watermill/watermill.html. Using these plans alone will not give
More informationGCSE Resistant Materials Year
Term Resistant Materials knowledge/skills Using and Applying Grade Criteria The importance of and how to measure and cut Be able to mark out a comb joint accurately and cut it wood accurately and repeatedly
More informationProject Skill Level: INTERMEDIATE Plywood Used: CANPLY EXTERIOR Good Two Sides (G2S) or precision sanded Aspen
Project Skill Level: INTERMEDIATE Plywood Used: CANPLY EXTERIOR Good Two Sides (G2S) or precision sanded Aspen MATERIALS LIST: (1) ¾" x 4 ft x 8 ft plywood panel (20) #8 x 2" Robertson or Phillips wood
More informationClock 35 - Toyland. Construction instructions for Clock 35
This clock has been designed for children, it is a stand-alone unit and can be positioned on a shelf or cabinet out of the reach of very young hands who may be tempted to touch. The clock is shown in two
More information*0600/401* 0600/401. CRAFT AND DESIGN STANDARD GRADE Foundation Level. Fill in these boxes and read what is printed below. Full name of centre
FOR OFFICIAL USE F 6/4 NATIONAL QUALIFICATIONS 29 MONDAY, 8 MAY 9. AM. AM Total CRAFT AND DESIGN STANDARD GRADE Foundation Level Fill in these boxes and read what is printed below. Full name of centre
More informationWatershed Model Construction Workshop in Pirapora, Brazil
Week 1 (1 day) Watershed Model Construction Workshop in Pirapora, Brazil March 17 th : Introduction and Base Construction Understand how the watershed model works. Comprehend the steps in building a watershed
More informationHARRISON S HARDWARE PF5891
1:48 BUILDING KIT HARRISON S HARDWARE PF5891 Model the local hardware store where layout residents can find all they need to keep their homes in tip-top shape and workshops running smooth. The positive
More informationSE5a Instrument Board part 2 - rev 1.1
SE5a Instrument Board part 2 - rev 1.1 Fuel (Petrol) Valve This valve uses two circular name plates, eight brass screws, one black plastic base, copper wire and two black plastic risers. You can pick any
More informationDIY CHILD S STOOL. Instructions
DIY CHILD S STOOL Children have their own special world. And having the right furniture is part of that world. We have designed an easy-to-assemble child's stool that you can paint in a selection of bright
More informationSecondary Wood Processing Manufacturing Processes 2015
Secondary Wood Processing Manufacturing Processes 2015 Manufacturing Process Example: Manufacturing of a Sideboard Panel Material for Table Top Solid Wood Doors Hardware Manufacturing Process Example:
More informationPROJECT PLANS WOODEN GIFT BOX
PROJECT PLANS WOODEN GIFT BOX Make the gifts you give even more special by presenting them in this one-of-a-kind gift box. In fact, the box may be valued more than whatever it contains. The box is sized
More informationModel the hub of your layout s rural setting. Planters Feed and Seed Supply Instructions N Scale 1:160 WOODLAND SCENICS
PF5201 Planters Feed and Seed Supply Instructions N Scale 1:10 Model the hub of your layout s rural setting. Planters Feed and Seed Supply presents a vintage agricultural center where farmers and rural
More informationOnline Support for Centre Assessors (OSCA)
Online Support for Centre Assessors (OSCA) Exemplar Material Exercise GCSE 2009 Design & Technology 5RM01/01 - Resistant Materials Exemplar 1: Shoe storage project PREFACE Exemplar Use Please note that:
More informationInstalling your SHOE KEEL
Installing your SHOE KEEL The shoe keel is there solely to protect the bottom of the hull. On a windy day, it will offer some resistance to a side or quartering wind and will help to avoid being blown
More informationWEBELOS CRAFTSMAN SUGGESTED DEN ACTIVITIES
SUGGESTED DEN ACTIVITIES Visit furniture factory, lumber mill or lumberyard. Some local home centers offer special weekend classes for Webelos age children. Invite someone to give a demonstration on the
More informationInstalling Faux Beams by Sennell
Installing Faux Beams by Sennell Tools and hardware required Fret saw (ideal), Stanley knife or similar sharp serrated edge knife Sanding block with 180 medium sandpaper Piece of cornice, if fitting beam
More informationKS1 Topic: Celebrations Block C Carnivals & Parades Session 1. The Lion Dance
KS1 Topic: Celebrations Block C Carnivals & Parades Session 1 The Lion Dance The lion dance seen at Chinese New Year originates from the legend of the monster known as Nian. During the performance the
More information3Insert the second rod no. 4
Yamato: Step-by-step 37 The stern block and searchlight control towers a b c d e f Recommended tools and materials Wood glue Sandpaper (no. 800 grain) Metal file Putty Craft knife For metal: Super Glue
More informationFRIDAY, 27 MAY 9.00 AM AM. Date of birth Day Month Year Scottish candidate number
FOR OFFICIAL USE F 6/4 Q Q2 Q3 Q4 Q5 Q6 Q7 Q8 Total NATIONAL QUALIFICATIONS 2 FRIDAY, 27 MAY 9. AM. AM CRAFT AND DESIGN STANDARD GRADE Foundation Level Fill in these boxes and read what is printed below.
More informationdesigned by Andrea Schewe
Use our templates to create crowns for Elsa and Anna of Arendelle, from the hit movie Frozen. Templates and instructions have been designed to fit both adults and little girls. DIRECTIONS 1. Cut out crown
More informationDYEING AND BLEACHING
PREAMBLE DYEING AND BLEACHING This syllabus is intended to create a platform for an objective assessment of candidates understanding of the socio-economic prospects of Dyeing and Bleaching. Through this,
More informationRobert Bosch GmbH. Wall organiser
Wall organiser The organisational talent Wall organiser Say goodbye to messiness! The wall organiser is the ideal place to store everything that tends to lie around. 1 Introduction Wardrobes, drawers and
More informationWOOD TOY NEWS. Master Toymaker Ken Martin is Lead Idea Man for the Martin Motors Car Carrier. May 4, 2014 Sunday. toymakingplans.
WOOD TOY NEWS A Wood Toy News Special Edition May 4, 2014 Sunday toymakingplans.com Master Toymaker Ken Martin is Lead Idea Man for the Martin Motors Car Carrier. This fun new toy plan set would ve never
More informationADULT. Adirondack / Muskoka Chair Plans
ADULT Adirondack / Muskoka Chair Plans Materials List 3/4" x 9 1/2" (1.9cm x 24.1cm) redwood, cedar or pine boards. Six, 8' (2.44m) boards should make one chair depending on knots and layout. You can also
More informationCleaning Procedure INTRODUCTION:
Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing
More informationHaslingden High School D&T Faculty 2013 Yr 8 Resistant Materials HOMEWORK
Haslingden High School D&T Faculty 2013 Yr 8 Resistant Materials HOMEWORK D&T Name: Form: Teacher: Given: Hand in: Effort Comment: Target: 1 Yr 8 RM Homework Check List Tick off the tasks when complete:
More informationCONTEMPORARY FABRICATION TECHNIQUES
CONTEMPORARY FABRICATION TECHNIQUES BENV7813 JAMES HARGRAVE 1. For more models and images http://contemporaryfab.blogspot.com.au/ CONTENTS COMPONENT #1 3D MODELING, 3D PRINTING, AND HYDRASTONE CASTING
More information6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
More informationJ.W. cobbler 1:160 BUILDING KIT PF5210 WOODLAND SCENICS
1:160 BUILDING KIT J.W. cobbler PF5210 The partially assembled walls, positive alignment system and prefinished edges make kit assembly quick, easy and accurate. This three-story brownstone features stacked
More informationWall-mounted folding desk.
Wall-mounted folding desk. Step-by-step project The wall-mounted folding desk: ideal for small rooms. Are big desks not doing it for you? We feel the same way. They take up a lot of space, especially in
More informationCOMPLIMENTARY WOODWORKING PLAN
COMPLIMENTARY WOODWORKING PLAN COFFEE TABLE PLAN This downloadable plan is copyrighted. Please do not share or redistribute this plan in any way. It has been paid for on your behalf by JET Tools, a division
More information-ARBOREAL. Skanfas Ltd Rikkilän/e 993 FIN Simola
Skanfas Ltd Rikkilän/e 993 FIN-54330 Simola www.skanfas.com Installation Instructions Skanfas is a fire-proof, weather-proof and non-decaying facade material. It is a combination of the pleasant look of
More informationSafety First! Use eye protection, always! Use ear protection with loud power tools. Stay with children while they work!
TM TM ART TABLE Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with children while they work! Follow tool manufacturers safety guidelines Page 1 ART TABLE Page
More informationMaking a Finished Product from Wood (National 4) level 4 (6 SCQF credit points)
Making a Finished Product from Wood (National 4) SCQF: level 4 (6 SCQF credit points) Unit code: H25Y 74 Unit outline This is the Added Value Unit in the National 4 Practical Woodworking Course. The general
More informationKentucky 4H Wood Science Plans Notebook. Plans Level 1
Kentucky 4H Wood Science Plans Notebook Plans Level 1 MATERIALS NEEDED: 1 piece wood 3/4" x 2 x 2 1 piece wood 3/4" x 3 x 3 1/2" 1 wooden spring-type clothespin 2-1 1/2" nails 1-1/2 woodscrew Wood Glue
More informationHardee s Restaurant kit in HO scale
Hardee s Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic and laser cut white acrylic, clear acrylic window glazing,
More informationPachinko Machine. Supplies: Part One: Construction. Optional: (1) 21" x 15.5" piece of wood. jumbo craft sticks. (2) 17" x 1" pieces of wood
Supplies: (1) 21" x 15.5" piece of wood jumbo craft sticks (2) 17" x 1" pieces of wood standard craft sticks (2) 14.5" x 1" pieces of wood 1" wooden craft circles (2) 4" x 2" pieces of wood drill (1) 14.5
More informationNoville School Diorama Part 4 Making the Floors and Plastering the Walls and Ceilings
Noville School Diorama Part 4 Making the Floors and Plastering the Walls and Ceilings Moulds and Materials Making the Floors Plastering the Ceiling Plastering the Walls Installing the Ceiling and Floor
More informationMAKE IT YOURS. Digital Photo Decoupage Art. How-2 instruction books for cool projects you can make your own.
MAKE IT YOURS Digital Photo Decoupage Art How-2 instruction books for cool projects you can make your own. DIGITAL PHOTO DECOUPAGE ART WHAT YOU WILL NEED Computer / Internet Connection Digital photos you
More informationFinishes and Finishing Techniques
Finishes and Finishing Techniques TED 126 Spring 2007 Review pages 147-150, 284-294 Finishes and finishing techniques The finishing process to choose depends partly on the type of wood and the appearance
More informationNational 5 Practical Woodwork
Exercise C. The legs of a chair are turned on the wood lathe. (a) (i) Sketch and name the tool used to produce the square shoulder shown at A. Name of tool: Sketch and name the tool used to check the diameter
More information2K Liquid Metal Paint Technical Data Sheet
2K Liquid Metal Paint Technical Data Sheet DESCRIPTION Metal Veneers is a specially formulated liquid metal paint that s easy to use for even the most discombobulated novice paint user. Our carefully guarded
More informationWOOD TOY NEWS. May 23, 2014 Friday. Imants Udris is the Contributing Editor and Photographer for this issue of Wood Toy News.
WOOD TOY NEWS How to Router and Paint Wood Toys May 23, 2014 Friday toymakingplans.com Master Toymaker Imants Udris shows us how to router and paint the Freaky Fords. In this Wood Toy News and accompanying
More informationITEM NO. DESCRIPTION BIDDER CODE NO. UNIT COST UNIT COST 1 GALLON 5 GALLON. 1 Oil Base Exterior House Paint Glidden Profess 2516 $22.
BID ON: PAINT AND SUPPLIES BID NO: 10-135 OPENED: DECEMBER 3, 2010 @ 2:00 PM 1 Oil Base Exterior House Paint Glidden Profess 2516 $22.00 Acrylic Latex Exterior Gloss House Paint 2 Super White Glidden Profess
More informationWoodwork Level 3, 3N0589
Page 1 Woodwork Level 3, 3N0589 Student Name: Student PPSN: Tutor: Date: Copyright 2016 Janna Tiearney, Educoot 1 Page 2 This workbook and accompanying ebook is by courtesy of The Woodwork Department Loughan
More information6043 DESIGN AND TECHNOLOGY
UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level www.xtremepapers.com MARK SCHEME for the October/November 2008 question paper 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1 (Technology),
More informationTARC Craftsmanship Skills. Carl A. Curling, Sc.D.
TARC Craftsmanship Skills Carl A. Curling, Sc.D. Scouting@NOVAAR.org The TARC 2017 challenge features several novel craftsmanship challenges, including: The application of a colored surface finish for
More informationTerm 3 Term 4 (Part 1)
Subject Year Overview 2017/2018 Art Y7, 8, 9 Term 1 Term 2 Term 3 Term 4 (Part 1) Term 4 (Part 2) Term 5 Year 7 Formal Elements During this project pupils will work explore the different Formal Elements
More informationProduct information Print-Medium for relief and intaglio. Intaglio printing in oil, using the Print-medium for relief and intaglio (50 056)
Intaglio printing in oil, using the Print-medium for relief and intaglio (50 056) Printing techniques in oil can now be realized with all Schmincke oil colours. Therefore you only have to change them into
More informationJUNIOR CERTIFICATE 2008 MATERIALS TECHNOLOGY (WOOD) MARKING SCHEME ORDINARY LEVEL SECTION A
JUNIOR CERTIFICATE 2008 MATERIALS TECHNOLOGY (WOOD) MARKING SCHEME ORDINARY LEVEL SECTION A 1 SECTION A - Sht Answers Mark all questions, select the best 16 questions This section is marked out of 80 marks.
More informationGolden angels in an elegant design
Golden angels in an elegant design The magic of advent these modern-looking, golden-gowned angels are simply perfect for giving your home a festive Christmas feel. Made using the clay-like FIMOair basic
More informationDC FAN FAMILY TEAM-UP BAT JETPACK INSTRUCTIONS
DC FAN FAMILY TEAM-UP BAT JETPACK INSTRUCTIONS Everyone knows that Batman and his crime-fighting family can t fly, but they do have fun gadgets to use while protecting the innocent. Gear up your little
More informationITEM DESCRIPTION BIDDER CODE NO. UNIT COST UNIT COST 1 GALLON 5 GALLON
BID ON: PAINT AND SUPPLIES - AS NEED UNTIL 1/31/19 BID NO: 18-11 OPENED: FEBRUARY 20, 2018 @ 2:00PM 1 Oil Base Exterior House Paint Mobile Paint Mfg. 1408 $21.50 Acrylic Latex Exterior Gloss House Paint
More informationGCSE Design and Technology Short Course
GCSE Design and Technology Short Course Paper 1 Mark scheme 45751 June 2013 Version: Final Mark Scheme Mark schemes are prepared by the Lead Assessment Writer and considered, together with the relevant
More informationCardboard Model Buildings
Cardboard Model Buildings Get more model kits from http://www.modelbuildings.org PRINTING & ASSEMBLY TIPS: These OO designs can easily be resized by reducing the print percentage as follows: OO scale is
More informationBUILDING A SELMER MACCAFERRI GUITAR
BUILDING A SELMER MACCAFERRI GUITAR A step-by-step guide to building a laminated body Selmer-Maccaferri guitar Michael Collins The Heel The heel should now be prepared to be glued to the neck shaft. Using
More informationMy own personal suggestion is that you use native timbers for the construction of your Psaltery. These are often the cheapest and most economical.
In making this design freely available I am granting a license for you to make one for yourself or to sell. All I ask in kind is that you somewhere include the authorising label on this page as acknowledgement.
More informationDIY Outdoor Console Table Addicted2DIY.com
DIY Outdoor Console Table Addicted2DIY.com *Before beginning this project, please read through all of the plans. Always use safety precautions whenever using power tools and follow the manufacturer s suggested
More informationWanderlust Suitcase Vanity
Wanderlust Suitcase Vanity If you re like me, you re always up for an adventure. When I saw some examples of DIY reclaimed suitcases, paired with the exciting new Wanderlust embroidery design collection,
More informationPattern Design. Broken Edges. Patterns are generally made from wood however they can be made from metal, plastic or any number of other materials.
Sand is a process that has been around for over 5000 years. The process itself is fairly simple. A pattern is pressed into a sand mould to leave an impression. The pattern is then removed and the impression
More informationHOW TO MANUFACTURE. SOLAR COOKIT & WAPI Water Pasteurisation Indicator
HOW TO MANUFACTURE SOLAR COOKIT & WAPI Water Pasteurisation Indicator 1 Solar Cooking Foundation The Netherlands (SCN), Prof.van Reeslaan 11, Blaricum, Tel: 0031 35 5312018; info@solarcooking.nl; www.solarcooking.nl
More informationHow to make a template to mount your plaque to a surface
How to make a template to mount your plaque to a surface A piece of heavy paper 3 4 wider than your plaque on all four sides (paper grocery bag works great too) Small amount of paint (latex dries the fastest)
More informationHome Lab 2 Pinhole Viewer Box
1 Home Lab 2 Pinhole Viewer Box Overview A pinhole camera, also known as camera obscura, or "dark chamber", is a simple optical imaging device in the shape of a closed box or chamber. In one of its sides
More informationVolume Solids % Weight Solids %
Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane
More informationMaterials Lists Summer School Adults. Calligraphy. Painting classes. Watercolour. Abstract Painting
Materials Lists Summer School 2016 Adults Calligraphy Speedball Nib and holder set (Please Note: Left handers will need special left handed nibs). Windsor and Newton Calligraphy Ink Black X 1 + Any Colour
More informationFrench Bunnies. Kerryanne English 2012
French Bunnies Kerryanne English 2012 Page2 French Bunnies Kerryanne English 2012 When I designed the bunnies I wanted something that could be used not only for Easter, but at any time of the year for
More informationFinishes for Turners Thomas Irven
Finishes for Turners Thomas Irven - Below is a list of finishes I use most often and some of the various products upon which I use these finishes. This is, by no means, the only way to to use these various
More informationforce Use the A lounge room makeover that s out of this world! With its iconic scenes Use the OCTOBER 2015
OCTOBER 2015 SEEN ON BHG TV BEFORE force A lounge room makeover that s out of this world! With its iconic scenes of galactic fantasy, Star Wars is one of cinema s most popular film series. Now you can
More informationWater based stains for interior
Water based stains for interior Summary of the main products and paint systems Edition: January 2011 WATER BASED STAINS FOR INTERIOR Code 888.10/xx 888.50/xx Description and features WB STAIN SPECIAL EFFECT
More informationNABTEB Past Questions and Answers - Uploaded online
NATIONAL BUSINESS AND TECHNICAL EXAMINATIONS BOARD NATIONAL CERTIFICATE EXAMINATION GENERAL WOOD WORK MAY/JUNE 2009 1a. Name two types of finishing materials (i) Oil finishing (ii) Wax polishies or finishe
More informationWOOD TOY NEWS. Imants Udris keeps his workshop buzzing with tests, projects and professionalism. August 11, 2013 Sunday. toymakingplans.
WOOD TOY NEWS toymakingplans.com August 11, 2013 Sunday Imants Udris keeps his workshop buzzing with tests, projects and professionalism. Intro by John Lewman, Owner ToymakingPlans.com We love getting
More informationThis booklet covers the theory aspects that you need to know for the examination in Y10.
Year 10 Graphics Notes: This booklet covers the theory aspects that you need to know for the examination in Y10. It does not cover the first section of the paper, as that is a design based question: Your
More informationCockpit Kit. Full Depth - Builds Quickly - Light Weight READ THROUGH THIS INSTRUCTION MANUAL FIRST. IT CONTAINS IM- laser cut wood kit
The Savage Light Sukhoi Su- 27 Cockpit Kit contains everything you need to build a full depth semi scale Su-27 cockpit, yet adds less than an ounce to your finished model s weight (not including pilot).
More informationAsk your DIY store or carpenter to cut the required boards to size. Instructions. 1. Cut out the opening for the bottles
KITCHEN TROLLEY Next time you're whipping up some magic in the kitchen, take advantage of our willing assistant. Fixed on rollers to provide easy mobility, our kitchen trolley can be stationed wherever
More informationDAVENPORT DEPARTMENT STORE PF5214
1:160 BUILDING KIT DAVENPORT DEPARTMENT STORE PF5214 Dress up your downtown scene with the classic Victorian architecture and large first-floor picture windows of the Davenport Department Store. Details
More informationNanton Grain Mill Assembly
( 1 ) Nanton Grain Mill Assembly Locate package for assembling storage building. These are cut from 1/8 masonite. Inspect and lightly sand edges where it will be bonded. Use white glue or CA glue to bond.
More informationPAINT EFFECTS. 2 - Planning the work. 3 - Preparation
PAINT EFFECTS There are varying levels of skill involved in paint effects, but some of the simplest techniques will produce very attractive results. Be sure all ladders are safe and correctly placed. Keep
More informationYork Modelmaking Bespoke Laser Cutting Service Information Sheet
York Modelmaking Bespoke Laser Cutting Service Information Sheet We hope that the information below will answer most of your queries for both our standard range of components and our bespoke laser cutting
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationCoimisiún na Scrúduithe Stáit State Examinations Commission. Junior Certificate Marking Scheme. Materials Technology Wood.
Coimisiún na Scrúduithe Stáit State Examinations Commission Junior Certificate 2011 Marking Scheme Materials Technology Wood Ordinary Level JUNIOR CERTIFICATE 2011 MATERIALS TECHNOLOGY WOOD MARKING SCHEME
More informationMetallic Pumpkin Centerpiece INSTRUCTIONS MATERIALS. Posh pumkins put fun front and center! SKILL LEVEL: PROJECT TIME: 2 HRS. by Jenni Radosevich
Metallic Pumpkin Centerpiece by Jenni Radosevich Posh pumkins put fun front and center! PROJECT TIME: HRS Krylon Fusion All-In-One Paint + Primer Metallic Silver, Metallic Copper Krylon Glitter Blast Silver
More informationDecorating Objects. Tips and Techniques Experimenting with Decorating Wax
Decorating Objects metal can with simple patterns shaved wood box with imprinted pattern lacquered box with strips of decorating Wax tea jar with Decorating and Modeling Wax Decorating objects from daily
More informationCar Dress Woodwork Repair and Finishing
Car Dress Woodwork Repair and Finishing Garth Pennington Osborne SA 5017 Contents Stripping the old finish Repairing wood and veneer Preparing for finishing Pore filling Staining Applying clear finish
More informationThere are also videos for many products This can be found on the own channel of "Borma Wachs"
From now on we offer the high quality products of the company Borma Wachs from Italy. We have many products directly in stock. We can also provide you parts which are not listed in our stock program. There
More informationJUNIOR CERTIFICATE 2005 MATERIALS TECHNOLOGY (WOOD) MARKING SCHEME ORDINARY LEVEL SECTION A
JUNIOR CERTIFICATE 2005 MATERIALS TECHNOLOGY (WOOD) MARKING SCHEME ORDINARY LEVEL SECTION A NOTE Please ensure that totals for each question are divided by two before entering marks on marking sheets.
More informationTo make your celestial scarf, you ll need:
Lunar Scarf The days have turned cold, and the nights twinkle with frosty stars. Take some inspiration from the heavens and the cycles of the moon with this elegant lunar scarf. Watch the moon wax and
More informationCOMPOSITES LAB MANUAL
COMPOSITES LAB MANUAL Version 1 Lab 6: Post-cure Processing The original version of this manual was a one student senior design project written by Katherine White, the Composite lab assistant, during Spring
More informationYEAR 9 MATERIALS TECHNOLOGY PINE STORAGE BOX KNOWLEDGE BOOKLET
YEAR 9 MATERIALS TECHNOLOGY PINE STORAGE BOX KNOWLEDGE BOOKLET You will be set homework once every two weeks. The information you need to learn is contained in this booklet. There will be a short test
More informationModel Grandma and Grandpa s cozy cottage, a. Country Cottage Instructions HO Scale 1:87 WOODLAND SCENICS PF5186
PF586 Country Cottage Instructions HO Scale :87 Model Grandma and Grandpa s cozy cottage, a young family s first home or give this vintage Victorian cottage the run-down look of an abandoned shack. This
More information