2013 SKILLS CANADA NATIONAL COMPETITION
|
|
- Lawrence Ramsey
- 5 years ago
- Views:
Transcription
1 2013 SKILLS CANADA NATIONAL COMPETITION CAR PAINTING 36 PROJECT INSTRUCTION SECONDARY Car Painting Total Time allocated: 12 hours
2 FENDER PROJECT You will prime and paint a fender, as if it is a used OEM part. When you come to a during your repair, you must call a judge to evaluate your progress before you move on to the next step. All safety equipment must be shown to a judge. Pick a fender and write your name on the back. Prepare your fender up to the sanding stage but do not sand. The fender can now be prepped for primer. Do not prime. The fender can now be primed and sanded. Clean the primer gun and your area. You can now mix the base coat colour and prepare your fender for painting. Do not paint. You can now paint and clear your fender. Clean your spray gun and your work area. Time limit : 3 hours maximum
3 PLASTIC PROJECT You have been given a new raw plastic bumper cover that you will paint black. When you come to a during your repair, you must call a judge to evaluate your progress before you move on to the next step. All safety equipment must be shown to a judge. Pick a bumper and put your name on the back. Prepare your bumper up to step 6 on tech sheet (adhesion promoter) The bumper can now be sealed. Clean the sealer gun and your area. You can now use the black paint provided to base coat the bumper. You can now clear coat your bumper. Clean your spray gun and your work area. Time limit : 3 hours maximum
4 POLISHING PROJECT You have been given a painted hood and you must remove all defects from the paint. When you come to a during your repair, you must call a judge to evaluate your progress before you move on to the next step. All safety equipment must be shown to a judge. Pick a half of a hood and put your name on the back. Prepare your hood for the compounding stage. Do not compound. The hood can now be compounded. Prepare your hood and equipment for the machine glaze stage. You can now machine glaze your hood and apply the decal in the top corner. It should be located 3 cm from the top, and 5 cm from the edge of the hood. Clean up your area and return all tools and supplies. Time limit : 2.5 hours maximum
5 MASKING PROJECT You will mask off a front door for respray. No parts will be removed, and the door must be able to be opened upon completion. DO NOT CUT ON THE VEHICLE OR A ZERO MARK WILL BE ASSESSED. When you come to a, you must call a judge to evaluate your progress before you move on to the next step. Mask the door jamb with the door in the open position. Close the door and mask the outside to 36 inches. You can now remove the masking and clean up your area. Time limit : 1.5 hour maximum
6 COLOUR MATCHING You will find the correct paint chip to match each of the three motorcycle gas tanks. You will look up the formula for the BLUE gas tank on the computer and mix the minimum quantity. Produce a spray out card using your mixed paint. When you come to a, you must call a judge to evaluate your progress before you move on to the next step. Find the correct paint chip for each motorcycle gas tank. Look up the formula on a computer and provide a print out for the judge. Record your name on each print out. Retrieve your print outs from the judge. Mix the blue paint colour, and create a spray out card. Be sure to put your name on your spray out card and submit to judge. Clean up your work area. Time limit : 2 hour maximum
2013 SKILLS CANADA NATIONAL COMPETITION
2013 SKILLS CANADA NATIONAL COMPETITION CAR PAINTING 36 PROJECT INSTRUCTION POST SECONDARY Car Painting Total Time allocated: 12 hours FENDER PROJECT You will prime and paint a fender laser red tri- coat,
More information20th ANNUAL SKILLS MANITOBA COMPETITION PAINT COMPETITON COMPETITION DESCRIPTION
20th ANNUAL SKILLS MANITOBA COMPETITION PAINT COMPETITON COMPETITION DESCRIPTION Break down of Students into 2 groups of 8 competitors maximum 4 Secondary and 4 Post- Secondary (2 ½ hour time blocks morning
More informationSample Test Project. Category: Transportation & Logistics. Regional Skill Competitions - Level 3. Skill Car Painting
Sample Test Project Regional Skill Competitions - Level 3 Skill- Car Painting Category: Transportation & Logistics 1 Table of Contents A. Preface... 3 B. Test Project... 4 C. Marking Scheme... 6 D. Infrastructure
More informationCleaning Procedure INTRODUCTION:
Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing
More informationPaint and Decals. Adequate ventilation is required when working in a confined area with paint and paint-related chemicals.
Service Guide Paint Repair Paint and Decals Utilimaster recommends that a professional body shop do all paint repairs. The service technician should read this entire procedure before working on the vehicle.
More informationRev TOOLS & MATERIALS REQUIRED QTY 3D PART NO. DESCRIPTION
Rev. 04-11 QTY 3D PART NO. DESCRIPTION 1 691800 FRONT AIR DAM 1 691802 RIGHT SIDE SKIRT 1 691801 LEFT SIDE SKIRT 1 691804 REAR LOWER SKIRT RIGHT SIDE 1 691803 REAR LOWER SKIRT LEFT SIDE 4 3M 94 3M ADHESION
More informationPrimer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1
08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,
More informationPaint Spraying: Spray gun parts Student A:
Paint Spraying: Spray gun parts Student A: You need to replace some parts for your spray gun. However, you don t know the name of the part, or the part number. Telephone a paint gun supplier and order
More information#85-2-5A: PAINT STRIPPING AND FINISH ANALYSIS AND CORRECTION - (Aug 7, 1985)
#85-2-5A: PAINT STRIPPING AND FINISH ANALYSIS AND CORRECTION - (Aug 7, 1985) "Please discard previous bulletin 85-2-5 due to this updated information." The corrosion protection provided by the factory
More informationREFINISH APPLICATION Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 REFINISH APPLICATION Course Syllabus Course Number: ART-0831 OHLAP Credit: No OCAS Code: None Course Length: 120 Hours Career Cluster: Transportation,
More informationPart # Ford Mustang Stalker Front Bumper
Rev. 6/12 Page 1 Part # 3354 2010-2012 Ford Mustang Stalker Front Bumper Notice: Pre-fit before painting! Install new, unpainted parts according to these instructions! Then remove parts, paint them and
More informationUNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
More informationPrimer / Primer Surfacer
Description is gray in color offering good filling and sanding properties, excellent holdout, fast dry, and good adhesion on properly prepaired substrates. can be used as either a high build primer / primer
More information8-746 High Production Non-Sanding Primer Grey GS907
8-746 Grey GS907 GENERAL INFORMATION 8-746 Grey GS907 is a multi use polyurethane High Solid (wet on wet) primer. This primer can be used as a general non sanding primer or for properly cleaned ridged
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationTechnical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner
Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal
More informationSecond Color Setup Negotiation Tool
Second Color Setup Negotiation Tool Version 3.0 August 2015 Copyright 2015 Collision Advice LLC All Rights Reserved. Table of Contents Introduction... 2 Definition... 3 Four Negotiation Questions 1. Is
More informationAUTOMOTIVE REFINISHING TECHNOLOGY CONTEST DESCRIPTION
AUTOMOTIVE REFINISHING TECHNOLOGY CONTEST DESCRIPTION PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field
More informationPLAS-STICK V-2350S LOW VOC FLEX ADDITIVE
PLAS-STICK V-2350S LOW VOC FLEX ADDITIVE GENERAL DESCRIPTION A Low VOC flexible additive designed to improve the adhesion, chip resistance and flexibility of select collision undercoat and clearcoat products.
More informationIncluded in Hardware Kit. Jeep Cut-Out Fender Flare Set of 4 Set Part # Rev STEP 1 PRIOR TO INSTALLATION
Jeep Cut-Out Fender Flare Set of 4 Set Part #10926-07 Rev-01 09-11-12 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the flares according to these written instructions with the hardware
More informationSALEEN BODY KIT INSTALLATION MUSTANG
SALEEN BODY KIT INSTALLATION 1994-1998 MUSTANG PART# 10-8002-C14234A Saleen Performance, Inc. 1225 East Maple Rd. Troy, MI 48083 248-743-4800 www.saleen.com 2 IF YOU ARE NOT EXPERIENCED IN THE AREA OF
More informationGray Urethane Surfacer (Low VOC)
Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet
More informationEarly Mustang & Cougar cowl repair
Early Mustang & Cougar cowl repair Okay, I m no expert but Bob suggested that I describe my experiences in replacing a rusty cowl in my 68 Mustang fastback I thought the cowl was good when I bought this
More informationHardee s Restaurant kit in HO scale
Hardee s Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic and laser cut white acrylic, clear acrylic window glazing,
More informationDamage Appraisal Guide for Heavy Vehicles and Equipment Heavy Vehicles and Equipment Paint Material Allowance Table June 1 st, 2017
Damage Appraisal Guide for Heavy Vehicles and Equipment Heavy Vehicles and Equipment Paint Material Allowance Table June 1 st, 2017 N.B. The allowances for polyurethane paint factor in the paint materials
More informationHow to use a Touch Up Bottle & Brush
How to use a Touch Up Bottle & Brush Tech Tips General Definitions Base Color (Basecoat): A color coat requiring a clear coat. Base Color provides color and appearance, while the clear coat provides gloss
More informationJEFFERSON COLLEGE PAINT IV
JEFFERSON COLLEGE COURSE SYLLABUS AUT 245 PAINT IV 3 Credit Hours Prepared by: Howard Hesketh December 3, 2007 Career & Technical Education Dr. John R. Keck, Dean Brenda Russell, Associate Dean Course
More informationJeep. Cut-Out Fender Flares Set of 4. Included in Hardware Kit: Set Part # Rev-8 06/29/16 STEP 1 PRIOR TO INSTALLATION
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More informationJeep. Flat Style Fender Flares Front Pair. Included in Hardware Kit:
Jeep Flat Style Fender Flares Front Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationPrimer Surfacer EP II
Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good
More informationCut-Out Fender Flares Rear Pair. Jeep. Included in Hardware Kit:
Jeep Cut-Out Fender Flares Rear Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationGENERAL REPAIR INSTRUCTIONS Work Precautions
IN-10 GENERAL REPAIR INSTRUCTIONS Work Precautions SAFETY Never stand in direct line with the chain when using a puller on the body or frame, and be sure to attach a safety cable. VEHICLE PROTECTION When
More informationPAINT, PUTTY, AND CAULKING MATERIALS FORM. Date. General Contractor. Painting Sub-Contractor. Project Number. Project Name.
SECTION 09902 PAINT, PUTTY, AND CAULKING MATERIALS FORM Date General Contractor Painting Sub-Contractor Project Number Project Name Project Address Paint, putty, and caulking materials as specified are
More informationMay 2012 Product Information GRS Deltron D800
GLOBAL REFINISH SYSTEM May 2012 Product Information GRS Deltron Clear PRODUCTS Deltron Clear Deltron Medium Solids Hardeners D803, D841, D861 Deltron Accelerated Medium Solids Hardener D864 Deltron Standard
More informationPaint wrap films vary greatly, but so do the techniques needed to install them
In recent years single-color paint wraps have come on strong in the marketplace, and rightfully so. p r o d u c t i o n & i n s ta l l at i o n B y J u s t i n Pat e The Art of the Paint Wrap Paint Wraps
More informationAutowave 3 Stage Application and Repair
Description The term spot repair refers to all repairs in which the repaired area has color blended invisibly into the existing finish. As a result, the car refinisher is not compelled to spray large panels
More informationTechnical Data Sheet.
Technical Data Sheet. Permahyd Hi-TEC Base Coat 480 Blending system for two-stage colours To achieve a perfect colour transition in the blending area or from repair to adjacent areas, e.g. wing / door.
More informationTARC Craftsmanship Skills. Carl A. Curling, Sc.D.
TARC Craftsmanship Skills Carl A. Curling, Sc.D. Scouting@NOVAAR.org The TARC 2017 challenge features several novel craftsmanship challenges, including: The application of a colored surface finish for
More informationGCSE Product Design. Manipulative Skills (Part of section 2).
Name - Check List When task is completed, photographed & notes written tick off the task. All tasks this week will be demonstrated to you. If you get stuck ask! GCSE Product Design. Manipulative Skills
More informationInstallation Instructions for Lambo Door Mechanism. 1. Lift the hood and remove left and right shield of front wheel.
Installation Instructions for Lambo Door Mechanism 1. Lift the hood and remove left and right shield of front wheel. 2. With the door open pull out the rubber hose connecting the door and the door frame,
More informationToyota FJ Cruiser 2006-Up Set Part # Revision A
Toyota FJ Cruiser 2006-Up Set Part # 31924 Revision A 03-31-08 Step 1: Prior to Installation: A) Fit: Verify the fit of the flares to vehicle. (Some filing, sanding, or cutting may be necessary to ensure
More informationThe Classic System. For those who build on reliable results. Spies Hecker simply closer. An Axalta Coating Systems Brand
The Classic System. For those who build on reliable results. Spies Hecker simply closer. An Axalta Coating Systems Brand The Classic System. Simple, practical and reliable The dependable solution for your
More informationConstructing a Cycle Shop
Constructing a Cycle Shop Materials needed 4 sq ft 3/8 outdoor plywood 2 sq ft. 1/2 outdoor plywood 2 sheets of Precision Sheet plastic ( cement block pattern) Clear window glass: 2 sq ft. to allow for
More informationUHS Duralit Extra Tinters series 150
2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum
More information1104. Clean up the door striker plates with a hand grinder using a wire brush and WD-40.
Chapter 31 - Misc. Putting VW Back Together (Video Clip 31) 1104. Clean up the door striker plates with a hand grinder using a wire brush and WD-40. 1105. Install both door striker plates on the VW body
More informationProduct Information Deltron D894 High Solids Clear
GLOBAL REFINISH SYSTEM May 2012 Product Information Deltron High Solids Clear PRODUCTS Deltron HS Clear Deltron HS Hardeners D897, D8208 Deltron MS Hardener D803, D841, D861, D864 Deltron Thinners D808,
More informationRoR Step-by-Step Review * Popper Chopper Mini Bike 1:8 Scale Monogram Kit #7534 Review
RoR Step-by-Step Review 20130604* Popper Chopper Mini Bike 1:8 Scale Monogram Kit #7534 Review This kit was one of the more famous Tom Daniel releases back in the 70 s Tom Daniel has designed many awesome
More informationK 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91)
K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200 IDENTITY CODE Primer Surfacer K 200 Primer Surfacer Hardener K 201 Flexible Primer Surfacer Hardener K 248 DT Reducers Cool Temperature Reducer
More informationDid I say that proper cleaning is important? I am going to start this module off with that.
PREPARATION It All Starts Here Featheredging, Masking, Primer, Block Sanding, Final Sanding One of the most important, or perhaps the most important, things you need to do when painting a car is to properly
More informationJeep. Cut-Out Fender Flares Set of 4. Included in Hardware Kit: Set Part # Rev-6 7/20/15 For complete fitment info visit :
Jeep Cut-Out Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationDodge Dakota 2005 Quad Cab Set Part # Revision A
Dodge Dakota 2005 Quad Cab Set Part # 51908 Revision A 2-17-06 Step 1: Prior to Installation: A) Fit: Verify the fit of the flares to vehicle. (Some filing, sanding, or cutting may be necessary to ensure
More informationinstallation manual m y w a l l a r t. c o m
installation manual Step 1 Step 2 Acclimate panels for 48 hours in the environment and temperature they will be installed in. Step 3 Install over relatively smooth flat surfaces, all major holes or major
More informationHONEY COAT RUSTUST PROOFINGROOFING 360 SPRAY WAND
HONEY COAT RUSTUST PROOFINGROOFING Penetrating formula to seep deep into seams. 24 oz. aerosol # AHC 360 SPRAY WAND Quickly get protection where it s needed with a 360 spray wand. Wand can be cleaned with
More informationFrame Finishing Instructions
Frame Finishing Instructions FiberMate Finishing Instructions This frame is designed to be painted and/or stained. Use the same high quality exterior grade paint or stain as used to finish the entry door.
More informationOffice Hours: M-R 3:00PM-4:00PM Phone Number: Office Location: IED B117 Technical Campus Address:
CRT 150/151 Painting and Refinishing/Lab 5001 (51977, 51981) Fall/2016/MTWR/8:00-10:30-10:30-4:00, Live, IED B116 Instructor Contact Information Instructor Name/Title: E.C. Lewis/Assistant Professor Office
More informationTUBULAR FRONT END KIT INSTALLATION INSTRUCTIONS MUSTANG
TUBULAR FRONT END KIT INSTALLATION INSTRUCTIONS 1979 2004 MUSTANG Pre-Installation Notes & Recommendations: Before disassembly, remove anything within the engine bay that can be removed; this will give
More informationJeep Cherokee Door XJ Set Part # Revision J
Jeep Cherokee 84-96 4 Door XJ Set Part # 10911 Revision J 6-5-06 Step 1: Prior to Installation: A) Fit: Verify the fit of the flares to vehicle. (Some filing, sanding, or cutting may be necessary to ensure
More informationTaco Bell Restaurant kit in HO scale
Taco Bell Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic, clear window glazing, Plastruct tile roofing, and logo
More informationCOLLISION REPAIR INFORMATION
COLLISION REPAIR INFORMATION FOR THE TOYOTA DEALER TITLE: PAINT GUIDE AND REPAIR PAGE 1 of 8 PROCEDURES SECTION: REFINISH BULLETIN #53 MODELS: ALL DATE: FEBRUARY 1994 The following information includes
More informationRAM OE Style Fender Flares Front Pair
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More informationChevrolet Cut-Out Fender Flares Set of 4
Chevrolet Cut-Out Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationSTEP 1 PRIOR TO INSTALLATION TOOLS FOR EASY INSTALLATION:
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More informationTape Measure Metal Clippers Screw Bit Set With Extensions
IMPORTANT: Read through instructions thoroughly before beginning to replace any damaged material. Minor damage can be fixed with a fiberglass repair kit and color matched paint. Tools Required Tape Measure
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL MODELS SR22 AND SR22T CHAPTER 56-30: DOOR GENERAL. Door 56-30: DOOR. 1. General
CIRRUS AIRPLANE MAINTENANCE MANUAL Door CHAPTER 56-30: DOOR GENERAL 56-30: DOOR 1. General The cabin door windows are manufactured of acrylic and adhesive bonded to the door structure. Replacement is accomplished
More informationLEXUS LS460/600h/L INSTALLATION MANUAL FRONT HALF SPOILER. USF40/41 UVF45/46 (2012y~) ATTENTION WALD. INTERNATIONAL ATTENTION
FRONT HALF SPOILER 1) Temporarily install WALD Front Spoiler to the body. Adjust the details of WALD Front Spoiler to fit the body by rasps or sandpapers. 2) Check the balance of the installation position
More informationP Waterborne Primer-Surfacer-Grey
PDS N4.15C January 2014 P950-5505 Waterborne Primer-Surfacer-Grey PRODUCT DESCRIPTION P950-5505 Waterborne Primer-Surfacer is a grey primer-surfacer based on the latest 1K waterborne technology for spot
More informationSECTION WOOD DOORS
SECTION 08211 WOOD DOORS Notice to Vendors: CANV prefers to purchase products that contain tropical wood only if they are certified according to the guidelines of the Forest Stewardship Council (FSC).
More informationWaterborne Tri-Coat Refinish Process
Waterborne Tri-Coat Refinish Process This Tri-Coat Refinishing Process is designed as a guide when performing a tri-coat refinish repair. It s important to familiarize yourself with the aspects of this
More informationBody Repair. Collision Repair. Specification. Fastener Specifications Fastener Specifications. Blind Rivet. Flow Drill Screw (FDS) Torque FDS
Body Repair Collision Repair Specifications Fastener Specifications Fastener Specifications Application Specification Metric English Cross-Car Brace Mounting Bolts 25 Y 18 lb ft Windshield Frame Mounting
More informationChevrolet Cut-Out Fender Flares Front Pair
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More informationPaint & Refinishing 4. Automotive Collision and Repair State Curriculum Committee
Paint & Refinishing 4 Course Information Developers: Automotive Collision and Repair State Curriculum Committee Roberto Rodriguez, Butler County Community College, Donnie Smith, Butler County Community
More informationRust Repair Patches Made Easy
Rust Repair Patches Made Easy Automotive bodies have a common ailment, we all know as rust! This booklet provides you with complete and comprehensive information on how to repair rust permanently on any
More information1K Top coats KFZ / NFZ
Peter Kwasny GmbH, Heilbronner Strasse 96, 74831 Gundelsheim / Germany Phone +49 (0) 6269-95-0, Fax: +49 (0) 6269-95-80 internet: www.kwasny.de e-mail info@kwasny.de EU-GB 1K Top coats KFZ / NFZ TECHNOLOGY
More informationChevrolet Pocket Style Fender Flares Set of 4
Chevrolet Pocket Style Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING:
More informationFord F150 Front Bumper
2009-2011 Ford F150 Front Bumper Warning! Read the instructions completely before beginning the installation. Before tightening bolts, drilling or cutting where required, check to make sure that there
More informationInstructions for Making Repairs to 3M 8681HS Blade Tapes Installed on Enstrom Helicopter Blades.
REPORT NO: TITLE: Instructions for Making Repairs to 3M 8681HS Blade Tapes Installed on Enstrom Helicopter Blades. MODEL NO: All PREPAIRED BY: P.B. dupont CHECKED BY: APPROVED BY: 1. SCOPE This specification
More informationJeep Cherokee 4-Door XJ Set Part # Rev
Jeep Cherokee 4-Door XJ Set Part # 10911 Rev-14 04-05-10 Step 1: Prior to Installation: A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided.
More informationCollision Repair and Refinishing Technology
Teacher Assessment Blueprint Test Code: 5266 / Version: 01 Copyright 2014 NOCTI. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationGMC Cut-Out Fender Flares Front Pair
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More information388. Wipe deck lid down with acetone, let dry and open deck lid for removal.
Chapter 12 - Deck Lid Repair (Video Clip 12) 388. Wipe deck lid down with acetone, let dry and open deck lid for removal. 389. Remove the two screws holding the rain gutter inside the deck lid, with a
More informationEnclosed Partition Installation Instructions
Nissan NV1500/2500/3500 High Roof Partition Kit Part #: DTC 1502-036 V1.0.08.06.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER TO ENSURE
More informationTABLE OF CONTENTS. Product Listing Index. Look for this symbol. It let s you know which products are available in 4-Color Process. BLUE FROG PRINTING
www.bluefrogprinting.net BFP16C The Roll Labels, Decals, Banners & Static Clings you ve come to expect and so much more! Product Listing Index Blue Frog Printing is proud to offer a large selection of
More informationTwo Panel Frameless Bypass Door
INSTALLATION INSTRUCTIONS Two Frameless Bypass Door Series 00 Please Record Model Number From Carton Label Here Please read these instructions carefully to familiarize yourself with the required tools,
More informationShell Gas Station & Convenience Store kit in HO scale
Shell Gas Station & Convenience Store kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing,
More informationThe Art of Automotive Model Finishes. by Darryl W. Peters, Ph.D IPMS Nationals
The Art of Automotive Model Finishes by Darryl W. Peters, Ph.D. 2010 IPMS Nationals doctordwp@gmail.com Presentation Request Please print your e-mail address on the sign in sheet to request an electronic
More informationReplacement Parts List: Left Side Components (as if you were sitting on the bike) QTY Price each Part Numbers Descriptions
Honda CBR600RR (09-12) Frame Slider Installation Instructions Part Numbers: 750-3349, 750-3340, 755-3349 & 850-3340 MADE IN THE USA! Carefully read instructions in their entirety before the install Professional
More informationChevrolet Pocket Style Fender Flares Set of 4
Chevrolet Pocket Style Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING:
More informationGMC Cut-Out Fender Flares Set of 4
GMC Cut-Out Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to
More informationFord Pocket Style Fender Flares Set of 4
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More informationNanton Grain Mill Assembly
( 1 ) Nanton Grain Mill Assembly Locate package for assembling storage building. These are cut from 1/8 masonite. Inspect and lightly sand edges where it will be bonded. Use white glue or CA glue to bond.
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationPUTTIES
CATALOGUE PUTTIES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - FILLERS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 CLEAR COATS - - - - - - - - - - -
More informationPainting Pitched Roofs
4 Tutorial 4 Painting Pitched Roofs Tile & Galvanized Iron Paint Academy Determining your product requirement: Measure area to which paint is to be applied. Depending on surface to which the product is
More informationSandpaper Product Guide. Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value
Sandpaper Product Guide Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value Index Introduction to Abrasives Abrasive Components... 3 Sandpaper
More informationChevy Chase Club June 30, 2008 Bowie Gridley Architects
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationA. Submit properly identified manufacturer's literature before starting work.
SECTION 10400 IDENTIFYING DEVICES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Labor and materials required for installation of plaque, school name and address numbers, directional signage, signage
More information3M Spray Equipment Products Automotive Refinish Applications. Effective, Efficient. Economical
3M Spray Equipment Products Automotive Refinish Applications Effective, Efficient Economical Key Benefits of using the 3M PPS Paint Preparation System Only one PPS cup for mixing and spraying Enables painters
More informationFord Cut-Out Fender Flares Rear Pair
Ford Cut-Out Fender Flares Rear Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationRAM Pocket Style Fender Flares Front Pair
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More informationCVS Pharmacy kit in HO scale
CVS Pharmacy kit in HO scale Parking lot base and cars not included This kit includes all building parts and wall-mounted signs milled in white styrene plastic, clear window glazing and pre-cut Plastruct
More information