Data Sheet 5741 Englisch

Size: px

Start display at page:

Download "Data Sheet 5741 Englisch"

Eunice Crawford
5 years ago
Views:

1 Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener K-PUR-Acryl Silk Gloss Properties Solvent-based two-component acrylic enamel paint. Silk gloss and quick drying with excellent adhesion and a particularly durable surface. Very resistant to light, weather, and abrasion with long-lasting gloss. Resistant to many chemicals according to test certificate. The base enamel must always be tinted using the Brillux Color System. Field of application For extremely hard-wearing enamel coatings on steel structure components and steel constructions, galvanized components and structures in the exterior and interior. Interior applications also include wood materials, e.g. MDF boards or melamine resin coated surfaces. Material description Standard colors: Scala No. Designation 0095 white * RAL 7035 light grey 7135 DB ME.01 dark grey 1) RAL 9006 white aluminium 1) 60.ME.01 RAL 9007 Grey aluminium 1) 75.ME.01 More colors can be mixed with the Brillux Color System. 1) Follow the other instructions for spraying under the Application heading. Gloss grade: Silk gloss Base material: Acrylic varnish, two-component VOC: EU limit for this product (Kat. A/j): 500 g/l (2010). This product contains a max. of 500 g/l VOC. Viscosity upon delivery (+20 C): > 90 s, DIN cup 4 mm Flash point: > +23 C Electric resistance: kω Density: approx g/cm³ Packaging: Standard colors: 2.5 kg * also 10 kg Color System: 1 kg, 2.5 kg, 10 kg Basic enamel (Basic enamel and hardener are supplied separately) Use Mixing ratio 5 weight parts base varnish with 1 weight part 2K-PUR-Acryl Hardener 5770 (corresponds to a volume ratio of approx. 4:1). Make sure to mix the two components thoroughly. Mixing Mix basic enamel and hardener in the specified mixing ratio just before applying the material. Then pour the paint in another container and stir again thoroughly. Avoid the inclusion of air. If necessary, use PUR Thinner 617 to obtain a consistency suitable for spray application. Thinning After mixing, depending on application method, up to 10 volume % with PUR Thinner 617. Tinting All colors can be mixed with one another. Compatibility Only mixable with similar materials and those specified in this Data Sheet. Date: Page 1 of 6

2 Data Sheet 5741 Application Enamel 5741 should preferably be applied by means of spraying. Small, delicate components can also be coated by means of a brush. We recommend using 2C Epoxy Primer 855 in the standard color shade Scala (8101 red brown) for the prime and/or intermediate coats when applying metallic color shades. Pot life (at +20 C) Approx. 4 hours. Pot life will be shorter at higher temperatures. After that time, neither dilute the material again nor continue to use it. Consumption High-pressure spraying/ XVLP technology: Approx. 120 ml/m² per crossspray cycle. Airless-/Air-Mix spraying: Approx. 160 ml/m² per crossspray cycle. Determine exact consumption by means of a test application on the object to be coated. Application temperature Favorable temperature +15 C. Do not apply if air or object temperature is below +5 C or if atmospheric moisture is high ( 80 %). Do not apply at temperatures above +25 C, in direct sunlight or on hot surfaces. Note information on moisture sensitivity provided in Notes. Tool cleaning Clean tools immediately after use with PUR Thinner 617. Drying Air-drying (+20 C, 65 % r. m.) Dust-dry after approx. 30 minutes. Recoatable after 6 to 8 hours, dry hard after approx. 16 to 24 hours. Fully cured after approx. 7 days. Allow longer drying times at a lower temperatures and/or higher air humidity. Oven-drying Ensure a flash-off time of approx. 30 minutes. Then bake the enamel for approx. 30 minutes at approx. 80 C. Storage Store in a dry location at a minimum temperature of +10 C. Reseal opened containers tightly. Declaration Water pollution classification Class 2, according to VwVwS. Product code PU50. Comply with the specifications in the current Safety Data Sheet. 2K-PUR-Acryl Hardener 5770 Properties Special hardener based on polyfunctional aliphatic isocyanate. Field of Application For mixing with 2K-PUR-Acryl High Gloss Enamel 5740 and Enamel 5741 in the corresponding mixing ratio. Material description Color: colorless Base material: aliphatic polyisocyanate Flash point: > +38 C Density: approx g/cm³ Packaging: 200 g, 500 g, 2 kg (basic enamel and hardener are supplied separately) Use Use 2K-PUR-Acryl Hardener 5770 in the corresponding mixing ratio with 2K-PUR-Acryl Enamel as described above. Storage Store at a dry place at a minimum temperature of +10 C. Reseal opened containers tightly. Declaration Water pollution classification Class 2, according to VwVwS. Product code PU30. Comply with the specifications in the current Safety Data Sheet. Page 2 of 6

3 Data Sheet 5741 Spray data Technique Nozzle Nozzle angle Supply air/ air volume Material pressure/ material quantity Thinning Crossspraying high pressure 1,4 mm 3 bar ca. 10 % 1 1½ Low pressure 1) yellow front end 2) % Ringeinstellung 6 8 (5 for metallics) ca. 10 % 1 1½ (1½ 2 for metallics) AirCoat 3) 0,009 0,011 Inch bar (Luft) bar ca. 4 6 % 1 Airless 4) 0,008 0,010 Inch bar ca. 4 6 % 1 Data is based on a substrate and ambient temperature of +20 C. 1) Information with reference to XVLP technology with Wagner FinishControl FC 3500 or FC ) Standard spray adapter (yellow) for all typical enamel paints and woodstains. Keep jet clean during application, too. Remove dried paint material using a soft brush. Follow machine manufacturer's instructions. 3) Information with reference to the use of AirCoat Nozzles 9/40 or 11/40 (red air cap). 4) Information with reference to the use of FineFinish Nozzles 408 or 410 (TradeTip 2/3 - violet). Use the green plug-in filter (Item no ) for airless spray application of metallic grey color shades (DB color shades). 5) For metallic color shades we recommend application in a vertical direction. Page 3 of 6

4 Coating build-up Substrate preparation The substrate must be solid, dry, clean, with good adhesiveness, load-bearing and free from separating agents. Check existing coatings for their suitability, loadbearing capacity and adhesive properties. Thoroughly clean and grind zinc and zinc-coated surfaces using Universal Cleaner 1032 according to BFS Leaflet No. 5. Thoroughly clean, grind and degrease aluminium according to BFS Leaflet No. 6. Prepare plastic surfaces according to BFS Leaflet No. 22. Thoroughly sand intact factory prime coats and intact old coats. Remove defective and unsuitable coats thoroughly and dispose of them as per the applicable regulations. Hazardous particles and vapors can be released while working on or Data Sheet 5741 removing coats, e.g. by means of sanding, flame cleaning, etc. Perform such work only in well ventilated areas and ensure the use of appropriate (breathing) protection as required. Apply prime and/or intermediate coat on the substrate depending on the requirements. Also see VOB Part C, DIN 18363, Section 3. Coating on iron/steel, exterior and interior Substrates Prime coat Intermediate coat Top coat iron/steel, uncoated (exterior 2x) iron / steel with factory prime coat 1) Defective areas and whole surface using Aluminium, zinc and zinc-coated components 1) depending on requirements and selection or 2K-Aqua Epoxy-Primer 2373 if necessary, CoilCoating, coating powder and twocomponent coats, etc. 1) Steel frames prime-coated in the factory with a hydro-immersion prime coat can be coated directly with without an additional all-surface prime coat. Interior coat on wood materials Substrates Prime coat Intermediate coat Top coat Wood materials, e.g. MDF boards or melamine resin coated surfaces depending on requirements and selection or 2K-Aqua Epoxy-Primer 2373 if necessary, Page 4 of 6

5 Notes Note the sensitivity to moisture 2K-PUR-Acryl Enamel paints are sensitive to moisture. For this reason, always make sure that the spray air and the substrate are dry. During application and drying (at least 24 hours), any moisture exposure, e.g. dew, fog or rain, must be avoided. Note dew point temperature. Make sure the temperature is at least 3 C above the dew point. Use in the interior If used in the interior, provide for good ventilation during application and drying. Sanding substrates We recommend sanding the surfaces between the individual working steps. Light sanding is required in particular if a coaton-coat structure is used. Designs with brilliant or intense color shades Brilliant, pure intense color shades, e.g. in the yellow, orange, red, magenta and yellowgreen range have a low hiding power due to the nature of their pigments. When using critical color shades in these color ranges, we recommend applying a full-covering prime coat in the corresponding base color (Basecode). In addition to the standard coating build-up, additional coats may be required. We recommend using 2C Epoxy Primer 855 in the standard color shade Scala (8101 red brown) for the prime and/or intermediate coats when applying metallic color shades. Creating test areas We recommend creating test areas using the specified application method to assess the surface effect of metal effect color shades and examining them on site. Refer to BFS Leaflet No. 25. Cleaning and care To clean the coated surfaces, use a clean, soft cloth, which is either dry or damp, but without any abrasive, solvent-based or caustic cleaning agents. Avoid applying too much pressure when cleaning (i.e. do not polish the surfaces). First, test the cleaning result in an unobtrusive area. Only clean surfaces that have completely dried and set. Further information Follow the instructions on the Data Sheets of the products used. Remark Data Sheet 5741 This Data Sheet has been prepared taking into account the current applicable German laws, standards, specifications and codes of practice. All details have been translated from the current German version. The contents do not form a legal contract. The user and/or the purchaser is not released from the responsibility of checking that our products are suitable for the proposed use. In addition our Terms of Conditions and Payment apply. When a new version of this Data Sheet appears with updated information the previous version no longer applies. The current version is available on our website. Brillux Weseler Straße Münster GERMANY Phone Fax info@brillux.de Page 5 of 6

6 Data Sheet 5741 Figure Coating structure on untreated steel, exterior 1 Prime coat 2 Prime coat 3 Intermediate coat 4 Top coat Page 6 of 6

Data Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description.

Data Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description. 0 Enamel 2388 2K-Aqua Seidenmattlack 2388 Englisch water-based, two-component, highly resistant to mechanical and chemical stress, AgBB certified, for interior and exterior use, with 2K-Aqua Hardener 2380