Technical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY

Size: px
Start display at page:

Download "Technical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY"

Transcription

1 / Description: Autocoat BT LV 250 Primer EP is a quick drying, chromate-free high solid two-pack epoxy primer-surfacer for shot blasted steel substrates.. The target use for this product is refinishing and refurbish of existing vehicles and the painting of newly build commercial vehicles and trailers. The EU VOC limit value for this product (product category: IIB.C) in ready to use form is max 540 g/litre. The VOC content of this product in ready to use form is max 538 VOC/g/l suction feed 1-2* mm 3-5 bar 5-10 mins. Product and Additives: LV 250 Primer EP Hardener Medium LV 250 Primer EP Hardener HB LV 250 Primer EP Reducer Medium LV 250 Primer EP Reducer Slow Basic Raw Materials: LV 250 Primer EP Hardener Medium LV 250 Primer EP Hardener HB LV 250 Primer EP Reducer Medium/Slow : epoxy resins : polyamide resins : polyamide resins : solvents see t.i.s. Polystop LP Polykit IV Suitable Substrates: Existing finishes, with the exception of finishes with a thermoplastic behavior Shot-blasted steel and aluminum. Zinctec (see note 1). Hot dipped galvanized steel and Zincor. Stainless steel. Aluminium (see note 2). Polyester laminates and plywood Wood. Sikkens polyester bodyfillers and Polysurfacer. Notes: 1. It is important that the zinc-coated steel is dried at 60 C prior to the painting in order to avoid gassing. 2. It is not advised to use LV 250 Primer EP on aluminum click constructions and in the case of rivets. 3. Do not apply this product to substrates, which have been pre-treated with a chemical cleaner, or phosphoric acid primers. 1/5

2 Surface Preparation: Existing finishes: Degrease with LV 350 Antistatic Silicone Remover and dry sand with P280 grit. Shot-blasted steel and aluminum: Blast clean to Sa 2,5-3. Stainless steel: Degrease with LV 350 Antistatic Silicone Remover and dry sand with P180 grit or degrease with LV 350 Antistatic Silicone Remover and abrade with Scotch Brite type A (red). Hot dipped galvanized steel, Zincor and aluminum: Degrease with LV 350 Antistatic Silicone Remover and abrade with Scotch Brite type A (red). Polyester laminate and plywood: Degrease with LV 350 Antistatic Silicone Remover and dry sand with P280 grit or abrade with Scotch Brite type A (red). Wood: Dry sand with P180 grit to achieve a smooth surface and to remove any loose fibers. Sikkens polyester bodyfillers and Polysurfacer: Degrease with LV 350 Antistatic Silicone Remover and dry sand with P180-P280-grit. Tinting: 1. LV 250 Topcoat (IC)MM/RM LV 350 Topcoat MM/RM without hardener up to 5 percent by weight LV 351 Topcoat MM/RM. 2. Tintflex tinters up to 5% by volume Mixing Ratio by Volume: Mixture A: 100 parts of 50 parts of LV 250 Primer EP Hardener Medium parts of LV 250 Primer EP Reducer Medium or Slow or -205 Mixture B is especially developed for high build application: 4 parts of 1 part of LV 250 Primer EP Hardener HB Mixture C is especially developed for airmix and airless application 100 parts of 50 parts of LV 250 Primer EP Hardener Medium parts of LV 250 Primer EP Reducer Slow or Standard or -204 Note: It is optional to add an extra amount of LV 250 Primer EP Reducer Medium or Slow at mixture B up to a mixing ratio of 4:1:1 v/v. Spraying Viscosity: Mixture A: secs DIN Cup 4 at 20 C. Mixture B: Can not be measured in a DIN Cup 4 due to a too high viscosity. Mixture C: Can not be measured in a DIN Cup 4 due to a too high viscosity. Potlife: Mixture A: 4 hours at 20 C Mixture B: 8 hours at 20 C Mixture C: 4 hours at 20 C 2/5

3 Spray gun fluid tip and working pressure: Spray Gun: Fluid Tip: Working Pressure: Gravity feed: mm 3-5 bar Gravity feed HVLP: mm max. 0.7 bar Suction feed: mm 3-5 bar Suction feed HVLP: mm max. 0.7 bar Airless spray (mixture C) 4.13/ bar¹ Airmix spray (mixture C) 4.13/ bar¹ Pressure feed: mm 3-5 bar atomization pressure and ± 1 bar material pressure ¹It is advised to use a installation with a minimum capacity of 30:1 Note: Consult your Sikkens technical representative for Electrostatic spray application. Application Process: Spray gun Mixture A : Apply 1-2 single coats, allowing a flash-off time of 5 to 10 minutes between coats. Mixture A : Apply 1 cross-coat or 2 single coats. Airless/Airmix spray Mixture B&C : Apply one mist coat followed by a full coat. Mixture A/B : Don t add any thinner to both mixtures. Brush Film Thickness: Mixture A : Approx µm for dry each single wet coat. Mixture B : Approx µm dry for each single wet coat. Mixture C : Approx µm for dry each single wet coat. Theoretical cover rate: Mixture A : Theoretically 7.2 m²/l ready for use mixture at 50 µm. Mixture B : Theoretically 5.0 m²/l ready for use mixture at 100 µm. Mixture C : Theoretically 4.2 m²/l ready for use mixture at 100 µm. Note: The practical cover rate depends on many factors i.e. shape of the object, roughness of the surface, application method and application circumstances. Cleaning of Equipment: Use LV 250 Primer EP Reducer Medium/Slow or /5

4 Drying times: 10 C: 20 C: 40 C: 60 C: Recoatable with bodyfillers: At maximum 40 µm after: 2 hrs 45 mins 30 mins 15 mins Recoatable with filler or topcoat: In case of LV 250 Primer EP Reducer Medium At 80 µm after: 1½ hrs 45 mins 30 mins 15 mins In case of LV 250 Primer EP Reducer Slow At 80 µm after: 2 hrs 1½ hrs 1 hrs 30 mins Notes: 1. LV 250 Primer EP must be abraded with P360-P400 grit prior to be recoated with a finish, if a drying time of 48 hours at 20 C is exceeded. 2. Apply a minimum film build of µm of LV 250 Primer EP for a good corrosion protection and adhesion to the substrate. Recommended sandpaper grades before recoating with topcoat, when necessary: Dry sand with : P280-P360 Wet sand with : P800-P1000. Recoatable with: Polyester bodyfillers LV 250 Topcoat MM/RM LV 250 Topcoat IC RM LV 350 Filler Beige/Gray LV 350 Filler Varicolor LV 350 Topcoat MM/RM LV 351 Topcoat MM/RM Packaging: LV 250 Primer EP : 5L in 5-liter, 10L in 20-liter pail, 20L in 20-liter pail. LV 250 Primer EP Varicolor : 5L in 5-liter can LV 250 Primer EP Hardener Medium : 5L in 5-liter can, 200L in 200-liter drum, 1000L in 1000-liter container LV 250 Primer EP Hardener HB : 5L in 5-liter can, 25L in 30-liter pail. Colors: : Grey, Beige : Off White (Varicolor). 4/5

5 HEALTH & SAFETY DATA regarding Autocoat BT LV 250 Primer EP : For professional use only. (See Material Safety Data Sheet). See text on the label of this product. The user of this product is required to comply with the national statutory regulations for health and safety at work and waste disposal. Akzo Nobel Car Refinishes B.V. Address: Rijksstraatweg 31, PO Box 3, 2170 BA Sassenheim Tel: +31(0) IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation. Always read the Material Data Sheet and the Technical Data Sheet for this product if available. All advice we give or any statement made about the product by us (whether in this data sheet or otherwise) is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product. All products supplied and technical advices given are subject to our standard terms and conditions of sale. You should request a copy of this document and review it carefully. The information contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous development. It is the user's responsibility to verify that this data sheet is current prior to using the product. Coatings brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel. Head Office Akzo Nobel Car Refinishes B.V., PO Box BA Sassenheim, The Netherlands. 5/5

Technical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY

Technical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY 4 3505-002 1 3505-105 0.5 3505-204 Description: High solid two-pack epoxy primer-surfacer providing excellent appearance and corrosion protection. The target use for this product is refinishing and refurbish

More information

FOR PROFESSIONAL USE ONLY

FOR PROFESSIONAL USE ONLY 100 3506-001 20 3599-104 40 3506-204 3505-205 23 Description: High performance, fast drying two-pack non-sanding filler or sanding filler. The target use for this product is refinishing and refurbish of

More information

mm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application

mm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application Description Two-pack, VOC compliant, chromate-free epoxy primer-surfacer with good adhesion and corrosion resistance properties on all substrates within the Car Refinish market. For both new panels and

More information

E380 and E381 Epoxy Primer

E380 and E381 Epoxy Primer Description E380 is a high solids 3.5 VOC epoxy primer/sealer, which provides excellent filling over sand blasted metals. E380 dries fast while still maintaining good hold out and a smooth finish. E380

More information

Primer Surfacer EP II

Primer Surfacer EP II Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good

More information

Use suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.

Use suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator. Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The

More information

Primer / Primer Surfacer

Primer / Primer Surfacer Description is gray in color offering good filling and sanding properties, excellent holdout, fast dry, and good adhesion on properly prepaired substrates. can be used as either a high build primer / primer

More information

Gray Urethane Surfacer (Low VOC)

Gray Urethane Surfacer (Low VOC) Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet

More information

Primer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1

Primer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1 08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,

More information

Apply a high gloss color coat: LV650 Topcoat or LV650 Basecoat per TDS. Flash a minimum of 20 minutes before LV650 LumiCoat High Gloss application

Apply a high gloss color coat: LV650 Topcoat or LV650 Basecoat per TDS. Flash a minimum of 20 minutes before LV650 LumiCoat High Gloss application Description Autocoat BT LV650 Infuse LumiCoat is a high gloss, two-component polyurethane topcoat that offers the ability to add reflectance or brilliance to any Autocoat BT LV650 color. LumiCoat is part

More information

nax Pro LV3601/03/05 VHS Primer Surfacer

nax Pro LV3601/03/05 VHS Primer Surfacer Description VOC compliant, quick-drying multi grey shade, two-pack wet on wet and sanding primer surfacer, with excellent application and sanding properties. Helps to reduce process time and provides good

More information

Autowave 3 Stage Application and Repair

Autowave 3 Stage Application and Repair Description The term spot repair refers to all repairs in which the repaired area has color blended invisibly into the existing finish. As a result, the car refinisher is not compelled to spray large panels

More information

Autobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015

Autobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015 Description Autobase Plus solvent borne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be

More information

nax K Premium Primer

nax K Premium Primer Description Premium quality, high build multi grey shade fast drying, 2K sanding primer filler with excellent application and sanding properties. Due to its fast ambient drying, it helps to reduce process

More information

Application and Repair of Autobase Plus Red Tri-Stage Colors

Application and Repair of Autobase Plus Red Tri-Stage Colors Description Sikkens Autobase Plus Ready Mix (RM) Groundcoat and Midcoat are a unique color package that requires a specialized blend of pigments and toners designed to provide a color match for FA12:RR.

More information

SELECTION AND PREPARATION OF SUBSTRATES

SELECTION AND PREPARATION OF SUBSTRATES 592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates

More information

10P20-44MNF High Solids Epoxy Primer

10P20-44MNF High Solids Epoxy Primer Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for application to aircraft exterior surfaces.

More information

Product Data Sheet November 2016

Product Data Sheet November 2016 Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer

More information

2K weather resistance clear coat A850

2K weather resistance clear coat A850 Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance

More information

nax Urethane Primer Surfacer Zitan

nax Urethane Primer Surfacer Zitan Description Quick-drying two-pack wet on wet primer surfacer and sanding primer filler with excellent application and sanding properties. Helps to reduce process time due to its wide application window

More information

HP Chromate Free Epoxy Primer P /-4505/-4510

HP Chromate Free Epoxy Primer P /-4505/-4510 Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free

More information

Product Information PRIMA D839 2 Component Primer

Product Information PRIMA D839 2 Component Primer GLOBAL REFINISH SYSTEM March 2011 Product Information PRIMA 2 Component Primer PRODUCT DESCRIPTION Prima is a grey 2K primer surfacer, suitable for a wide range of day-to-day repair work. Versatile, quick

More information

Technical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner

Technical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal

More information

HP Epoxy Primer P

HP Epoxy Primer P Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy

More information

March 2009 Product Information RAPID GREYMATIC 2K Filler

March 2009 Product Information RAPID GREYMATIC 2K Filler GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,

More information

GRIP-GARD BC Translucent For Professional Use Only

GRIP-GARD BC Translucent For Professional Use Only Description Grip-Gard BC uses a specially blended binder which converts Grip-Gard BC toners into a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted quickly

More information

BC Translucent uses a specially

BC Translucent uses a specially Grip-Gard BC Translucent Description Technical Data Sheet October 2013 Topcoat Grip-Garinto a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted BC Translucent

More information

January 2007 Product Information DELTRON D821

January 2007 Product Information DELTRON D821 GLOBAL REFINISH SYSTEM January 2007 Product Information DELTRON High Solids Chip Resistant Primer PRODUCT DESCRIPTION is a transparent-grey primer surfacer with excellent anti-chip and anti-corrosion properties.

More information

Aerodur 3001 Base Coat Special Effects

Aerodur 3001 Base Coat Special Effects Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001

More information

Product Data Sheet August 2006 (Updated in December 2014)

Product Data Sheet August 2006 (Updated in December 2014) Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey

More information

Full Product Name. Products. Properties. 2K Etch Primer. Type of Product Description

Full Product Name. Products. Properties. 2K Etch Primer. Type of Product Description Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion

More information

PercoTop PUR 2K MS Topcoat

PercoTop PUR 2K MS Topcoat Features is a 2K topcoat based on acrylic and polyester resins. It has an excellent mechanical and chemical resistance. The topcoat is easy to apply. 5 gloss levels: high gloss to matt. Products Base Paint

More information

Volume Solids % Weight Solids %

Volume Solids % Weight Solids % Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane

More information

PercoTop 449 2K Structure Topcoat

PercoTop 449 2K Structure Topcoat Features is a polyurethane based 2K structure topcoat with a high mechanical resistance. It has an excellent resistance to solvents and other chemicals. Different structures can be produced (cf. PercoTop

More information

RAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION

RAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied

More information

Big Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)

Big Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT

More information

Product Information DP5000

Product Information DP5000 GLOBAL REFINISH SYSTEM March 2016 Product Information DP5000 (For use with UHS Hardener) PRODUCT DESCRIPTION D8521 Light Grey D8525 Grey D8527 Dark Grey UHS Hardener D8717/18/19 Thinners DP5000 is a range

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS Express Surfacer 5250. Permasolid HS Express Surfacer 5250 is a high-grade, productive, VOCcompliant 2K HS sanding surfacer based on acrylic resins. Very good application

More information

8-746 High Production Non-Sanding Primer Grey GS907

8-746 High Production Non-Sanding Primer Grey GS907 8-746 Grey GS907 GENERAL INFORMATION 8-746 Grey GS907 is a multi use polyurethane High Solid (wet on wet) primer. This primer can be used as a general non sanding primer or for properly cleaned ridged

More information

Product Information. 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue. Product Description

Product Information. 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue. Product Description Product Information 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue Product Description The 2K Chromatic Sealer NR (D80xx) is a premium quality

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,

More information

Product Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer

Product Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer Product Description A-Chromatic Surfacers ECP11 White, ECP15 Gray, ECP17 Black are premium quality low VOC primer surfacers,

More information

Product Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer. Product Description. Preparation of Substrate

Product Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer. Product Description. Preparation of Substrate Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Product Description A-Chromatic s ECP11 White, ECP15 Gray, and ECP17 Black are premium quality, low VOC primer surfacers specifically

More information

2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX

2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX 2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX PICTOGRAM DESCRIPTION Degrease Machine sand dry Hand sand wet Hand sand dry Scotch Brite Use Akzo Measuring Stick Ready to Spray Mixing Ratio: 2

More information

Permasolid HS Vario Surfacer 8590

Permasolid HS Vario Surfacer 8590 Permasolid HS Vario Surfacer 8590 GENERAL DESCRIPTION A high quality acrylic surfacer from our 2K-Acryl-System for partial and full passenger car refinishes. Its versatility enables application at both

More information

Volume Solids %

Volume Solids % Product Name Full Product Name Type of Product Description 2K acrylic urethane solid topcoat Concept is a 2 K Solid tinting system. It incorporates a large range of colour formulations, with high opacity

More information

March 2013 Product Information GRS Deltron BC

March 2013 Product Information GRS Deltron BC GLOBAL REFINISH SYSTEM March 2013 Product Information GRS Deltron BC Basecoat colour PRODUCTS Deltron Basecoat Tinters Deltron Xirallic Special Effect Tinters Deltron Thinners Deltron BC Fade-out Thinner

More information

Product Information Deltron D894 High Solids Clear

Product Information Deltron D894 High Solids Clear GLOBAL REFINISH SYSTEM May 2012 Product Information Deltron High Solids Clear PRODUCTS Deltron HS Clear Deltron HS Hardeners D897, D8208 Deltron MS Hardener D803, D841, D861, D864 Deltron Thinners D808,

More information

AquaCLAD Water-Reducible Rust Preventative Alkyd

AquaCLAD Water-Reducible Rust Preventative Alkyd AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High

More information

Product Data Sheet March 2015

Product Data Sheet March 2015 Product Data Sheet March 2015 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY 2K HS Plus Express Clearcoat P190-6659 Product Product Description P190-6659 is a fast drying high solids 2-pack express clearcoat.

More information

Quality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions.

Quality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions. Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline SPRAY Application Instructions www.antifoulingpaint.net Thank you for selecting Velox Plus Antifouling Paint to protect

More information

DULUX UNIVERSAL UNDERCOAT

DULUX UNIVERSAL UNDERCOAT TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT

More information

May 2012 Product Information GRS Deltron D800

May 2012 Product Information GRS Deltron D800 GLOBAL REFINISH SYSTEM May 2012 Product Information GRS Deltron Clear PRODUCTS Deltron Clear Deltron Medium Solids Hardeners D803, D841, D861 Deltron Accelerated Medium Solids Hardener D864 Deltron Standard

More information

Permasolid HS Premium Surfacer 5310

Permasolid HS Premium Surfacer 5310 Permasolid HS Premium Surfacer 5310 GENERAL DESCRIPTION A high quality, high solids 2K acrylic surfacer for passenger car refinishing that provides very high film build with good vertical stability, efficient

More information

Product Information FILLERS

Product Information FILLERS GLOBAL REFINISH SYSTEM February 2010 Product Information FILLERS PRODUCTS Galvaplast 77 - Multi Purpose Polyester A656 Multi Purpose A722 - Flexible Polyester Putty - Standard Polyester A1 - Polyester

More information

Soak a cloth with SC 850 and wipe over a sand-through.

Soak a cloth with SC 850 and wipe over a sand-through. Process description High-quality refinishing process suitable for long-lasting restorations of classic cars in professional body shops, using the R-M base- clear coat systems. Substrates - Steel - Galvanised

More information

PRODUCT GUIDE: COMPLIANT TOPCOATS. Version:

PRODUCT GUIDE: COMPLIANT TOPCOATS. Version: PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing

More information

Quality Marine Equipment Since Antifouling Paint For Metal Under The Waterline ROLLER. Application Instructions.

Quality Marine Equipment Since Antifouling Paint For Metal Under The Waterline ROLLER. Application Instructions. Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline ROLLER Application Instructions www.antifoulingpaint.net THANK YOU! Thank you for selecting Velox Plus Antifouling Paint

More information

P Waterborne Primer-Surfacer-Grey

P Waterborne Primer-Surfacer-Grey PDS N4.15C January 2014 P950-5505 Waterborne Primer-Surfacer-Grey PRODUCT DESCRIPTION P950-5505 Waterborne Primer-Surfacer is a grey primer-surfacer based on the latest 1K waterborne technology for spot

More information

BRUSH APPLICATION INSTRUCTIONS

BRUSH APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981 Antifouling Paint For Metal Under The Waterline BRUSH APPLICATION INSTRUCTIONS www.antifoulingpaint.net TABLE OF CONTENTS Humidity & Drying Metal Surfaces... 1 Coverage

More information

UHS Duralit Extra Tinters series 150

UHS Duralit Extra Tinters series 150 2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum

More information

PAINT SYSTEMS Polyester yachts

PAINT SYSTEMS Polyester yachts PAINT SYSTEMS Polyester yachts Polyester osmosis renovation Polyester osmosis repair Polyester below the waterline Polyester above the waterline Polyester decks Polyester superstructure Polyester interior

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS Automotive Top Coat 275. Permasolid HS Automotive Top Coat 275 is a High-Solid top coat system for solid colours. It is used for passenger car finishes. The comprehensive

More information

PRODUCT GUIDE: WATERBORNE TOPCOATS. Version:

PRODUCT GUIDE: WATERBORNE TOPCOATS. Version: PRODUCT GUIDE: WATERBORNE TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: CONTAINER GUARD QD BLACK PRODUCT: 4886-02 DESCRIPTION: CONTAINER GUARD QUICK DRY (QD) is an air-drying, water reducible

More information

VELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981

VELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981 VELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981 VELOX PLUS TECHNICAL INFORMATION Please read all information and application instructions before beginning. Coverage Estimates Normal

More information

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY). Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as

More information

PRODUCT GUIDE: CATALYZED TOPCOATS. Version:

PRODUCT GUIDE: CATALYZED TOPCOATS. Version: PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane

More information

2 : % VOC-compliant clear 2 : % Clear Mixing ratio 100% by vol Film thickness: µm.

2 : % VOC-compliant clear 2 : % Clear Mixing ratio 100% by vol Film thickness: µm. Application: Drying accelerator for Glasurit standard clears (VOC-compliant and non-voc-compliant), Line, Line VOC, VOC MC600, and 85- HS-Primerfiller / Filler Properties: Reduction of drying times Improves

More information

Process description R-M process ONYX HD. Special paint system for the Nissan GT-R, colour KAB

Process description R-M process ONYX HD. Special paint system for the Nissan GT-R, colour KAB Process description R-M process ONYX HD. Special paint system for the Nissan GT-R, colour KAB Substrates - original OEM paint Nissan Required products - PK 700 / PK 900 / PK 1000 / PK 2000 - EUROXY CP

More information

SYSTEM INFORMATION Glasurit 55 Line procedure

SYSTEM INFORMATION Glasurit 55 Line procedure 1. Edge to edge repair 1-0 Process description Paint system with improved surface hardness for Nissan GT-R with Line 55. 1-1.Application of surfacer Apply 801-72 according to 801-72 technical information.

More information

Data Sheet 5741 Englisch

Data Sheet 5741 Englisch Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl

More information

July 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear

July 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst

More information

CUPRON NEXT TECHNICAL DATA SHEET

CUPRON NEXT TECHNICAL DATA SHEET Product description New hard matrix antifouling paint free of copper and organostannic compounds. It provides good seasonal protection for boats that work even in particularly hot and aggressive waters.

More information

K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91)

K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200 IDENTITY CODE Primer Surfacer K 200 Primer Surfacer Hardener K 201 Flexible Primer Surfacer Hardener K 248 DT Reducers Cool Temperature Reducer

More information

Process description R-M Procedure DIAMONT. Special paint system for the Nissan GT-R, colour KAB

Process description R-M Procedure DIAMONT. Special paint system for the Nissan GT-R, colour KAB Process description R-M Procedure DIAMONT. Special paint system for the Nissan GT-R, colour KAB Substrates - original OEM paint Nissan Required products - PK 700 / PK 900 / PK 1000 - EUROXY CP - Ground

More information

Cleaning Procedure INTRODUCTION:

Cleaning Procedure INTRODUCTION: Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing

More information

Metal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces

Metal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation,

More information

D895 EU-113. Colour Blender. Preparation of Substrate: Required Products. Product Description:

D895 EU-113. Colour Blender. Preparation of Substrate: Required Products. Product Description: Product Description: GLOBAL REFINISH SYSTEM is a multipurpose product used with Global Refinish System BC colour. Mixed ready-to-spray with BC Colour, it is used as a blending clear along the colour blend

More information

PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS

PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS ULTRIMAX 1 ULTRIMAX 1 ULTRIMAX 1 THE NUMBER 1 FOR SAVING YOU TIME AND EFFORT ULTRIMAX 1 COMPLIANT PRIMER, GLOSS AND VALUE IN ONE Ultrimax 1 is a high build acrylicbased

More information

DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray

DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V PRIME Acrylic Urethane Surfacer P 238 DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable

More information

TECHNICAL DATA SHEET 9008B0900D. Desothane HD 9008B0900D Buffable Clear Coat. Product Description. Components. Specifications

TECHNICAL DATA SHEET 9008B0900D. Desothane HD 9008B0900D Buffable Clear Coat. Product Description. Components. Specifications TECHNICAL DATA SHEET Product Description Desothane HD is a buffable clear coat intended to be used over Desothane HD 9008 Basecoat. can also be used as a buffable clear coat over pigmented polyurethane

More information

July 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear

July 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst

More information

CV116 Polyurethane Coat Gloss

CV116 Polyurethane Coat Gloss Polyurethane Coat Gloss TECHNICAL DATA SHEET Product Description Components is a two pack, ambient curing clear polyurethane gloss coating, designed for internal / external use to protect identification

More information

Marine. Paint Specification: November ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS

Marine. Paint Specification: November ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS Marine ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS ::Below the Water Line:: System 1 Fiberglass Substrate Pre Treatment Degreaser 10 Additional Requirements Keep surface wet for 5 to 10

More information

Automotive Refinish Terminology

Automotive Refinish Terminology Automotive Refinish Terminology Accelerator: A substance that when added to a paint will speed up the rate of cure. Acetone: A very fast evaporating solvent with high solvency for certain types of compounds

More information

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments. Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining

More information

PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required

PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required

More information

High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.

High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding

More information

Physical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.

Physical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material. Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (

More information

Product Data Sheet Awlwood MA Primers OJ3809 / OJ9809 / OJ7809 Specification Data

Product Data Sheet Awlwood MA Primers OJ3809 / OJ9809 / OJ7809 Specification Data Specification Data Packaging: Product Code: Cleaning: Available in 1 quart packs OJ3809 Clear; OJ9809 Yellow; OJ7809 Red OT0200 Awlwood MA Brush Cleaner Volume Solids: 45% Specific Gravity: OJ3809-1.013

More information

F565 Intermediate Coatings (EMEA)

F565 Intermediate Coatings (EMEA) TECHNICAL DATA SHEET Product Description Components is a two pack, pigmented, polyamide based coating formulated for use as intermediate coats in selectively strippable finish paint systems. High resistance

More information

ADLER 2K-Fenstergrundlack

ADLER 2K-Fenstergrundlack ADLER 2K-Fenstergrundlack 69511 ff Solvent-based white primer and intermediate coat for industrial and professional use PRODUCT DESCRIPTION General Special Properties and Standards Application area Solvent-based,

More information

TECHNICAL DATA SHEET IVY COATINGS:

TECHNICAL DATA SHEET IVY COATINGS: direct to metal Interior/Exterior DESCRIPTION Ivy Direct To Metal Paint is a low-voc interior/exterior; waterborne; rust-inhibiting metal paint that does not compromise indoor air quality. Ivy Direct To

More information

DPLV Low VOC Epoxy Primer P-245

DPLV Low VOC Epoxy Primer P-245 Low VOC Epoxy Primer P-245 Low VOC Epoxy Primer provides excellent adhesion and corrosion resistance to many types of properly prepared steel, aluminum, and fiberglass substrates. Epoxy Primer may also

More information

DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray

DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V-PRIME DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V-PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable for the wide range of day-to-day

More information

Gen2O - Environmentally Friendly

Gen2O - Environmentally Friendly Waterborne Automotive Basecoat: Go for Gen2O and build a future for your business that makes cents. Gen2O is user friendly and cost effective. The transition from conventional to Gen2O is easy. Only minor

More information

Paint Problems and Solutions Guide. Endura Manufacturing Co. Ltd th Street Edmonton, Alberta T5L 2J

Paint Problems and Solutions Guide. Endura Manufacturing Co. Ltd th Street Edmonton, Alberta T5L 2J Paint Problems and Solutions Guide Endura Manufacturing Co. Ltd. 12425 149th Street Edmonton, Alberta T5L 2J6 1-800-661-9930 www.endura.ca Table of Contents Paint problems are easy to spot, but in many

More information

TECHNICAL DATA SHEET 515X349. DeSoto 515X349 Exterior Primer. Product Description. Components. Specifications

TECHNICAL DATA SHEET 515X349. DeSoto 515X349 Exterior Primer. Product Description. Components. Specifications TECHNICAL DATA SHEET Product Description DeSoto exterior primer is a conventional solids urethane compatible epoxy coating. This primer was formulated to protect aluminum and composite substrates from

More information

Desobond CA102 Adhesive Bonding Primer

Desobond CA102 Adhesive Bonding Primer TECHNICAL DATA SHEET Product Description Components Desobond is a low density adhesion promoter. It was developed to improve bonding characteristics to aged primers, topcoats, acrylics, aluminum, and other

More information