Report No.: 9A042401C1 Page 1 of 51. Test Report. EN 50155: 2007 (EMC, Characteristic, Environmental Test) Prepared for

Transcription

1

2 Report No.: 9A042401C1 Page 1 of 51 EN 50155: 2007 (EMC, Characteristic, Environmental Test) Product: Industrial IEEE a/b/g Dual-RF AP/Bridge/Client Trade Name: MOXA Model Number: AWK-5222 Prepared for MOXA Inc. Fl.4, No.135, Lane 235, Pao-Chiao Rd., Shing Tien City, Taipei, R.O.C. TEL.: FAX.: Prepared by 244 No.5-2, Lin 1, Tin-Fu Tsun, Lin-Kou Hsiang, Taipei County, Taiwan, R.O.C. TEL.: FAX.: Remark: The test report consists of 51 pages in total. It shall not be reproduced except in full, without the written approval of IETC. This document may be altered or revised by IETC only, and shall be noted in the revision section of the document. The test results in the report only to the tested sample.

3 Report No.: 9A042401C1 Page 2 of 51 Table of Contents 1 General Information Description of Equipment Under Test Summary of Test Results Test Facility Measurement Uncertainty 7 2 Characteristic Test Visual Inspection Performance (Supply variations) Performance (Supply interruption) Performance (Supply change over) Insulation Test 12 3 Electromagnetic compatibility (EMC) Supply Overvoltages Surges Test Electrostatic Discharge Test Transient Burst Susceptibility Test Radio- Frequency, Electromagnetic Field Immunity Test Radio- Frequency, Conducted Disturbances Immunity Test Power Line Conducted Emission Radiated emission 24 4 Environmental Tests Cooling Test Dry Heat Test Vibration Test Shock Test 37 5 Photographs of EUT 43

4

5 Report No.: 9A042401C1 Page 4 of 51 1 General Information 1.1 Description of Equipment Under Test Product Model Number Applicant Manufacturer Power Supply Date of Receipt of Sample : Mar. 21, 2009 : Industrial IEEE a/b/g Dual-RF AP/Bridge/Client : AWK-5222 : MOXA Inc. Fl.4, No.135, Lane 235, Pao-Chiao Rd., Shing Tien City, Taipei, R.O.C. : MOXA Inc. Fl.4, No.135, Lane 235, Pao-Chiao Rd., Shing Tien City, Taipei, R.O.C. : Input: 12 ~ 48VDC Date of Test : Mar. 21 ~ 24, 2009 Product Information : Interface/ Port: 1. LAN Port *2 2. RS-232 Console Port *1 3. DIDO Port *1 Additional Description : 1) The EUT is Industrial IEEE a/b/g Dual-RF AP/Bridge/Client. 2) The Model Number AWK-5222 is representative selected in the test and included in this report. 3) For more detail specification about EUT, please refer to the user s manual.

6 Report No.: 9A042401C1 Page 5 of Summary of Test Results Report Clause Phenomenon 2 Characteristic Test EN Reference Clause(s) Reference standard Result 2.1 Visual Inspection Applicable 2.2 Performance (Supply variations) 2.3 Performance (Supply interruption) 2.4 Performance (Supply over change) Applicable - Applicable - Applicable 2.5 Insulation Test Applicable 3 Electromagnetic Compatibility (EMC) 3.1 Supply Overvoltages Applicable 3.2 Surges Test EN EN Applicable 3.3 Electrostatic Discharge Test EN EN Applicable 3.4 Transient Burst Susceptibility Test EN EN Applicable 3.5 Radio- Frequency, Electromagnetic EN Field Immunity Test EN Applicable 3.6 Radio- Frequency, Conducted EN Disturbances Immunity Test EN Applicable 3.7 Power Line Conducted Emission EN Measurement EN Applicable 3.8 Radiated Emission Measurement EN EN Applicable 4 Environmental Tests 4.1 Cooling Test EN Applicable 4.2 Dry heat Test EN Applicable 4.3 Vibration Test EN Applicable 4.4 Shock Test EN Applicable

7 Report No.: 9A042401C1 Page 6 of Test Facility Site Description : Conduction 1 OATS 1 EMS Site Name of Firm : Company web : Site 1, 2 Location : No.5-2, Lin 1, Tin-Fu Tsun, Lin-Kou Hsiang, Taipei County, Taiwan, R.O.C. Site 3, 4 Location : No. 12, Ruei-Shu Valley, Ruei-Ping Tsun, Lin-Kou Hsiang, Taipei County, Taiwan, R.O.C. Site Filing : Federal Communication Commissions USA Registration No.: (OATS 1 & 2) Registration No.: (OATS 3 & 4) Designation No.: TW1020 Voluntary Control Council for Interference by Information Technology Equipment (VCCI) Japan Member No.: 1349 Registration No. (Conducted Room): C-1094 Registration No. (Conducted Room): T-271 Registration No. (OATS 1): R-1040 Registration No. (OATS 2): R-1041 Industry Canada (IC) OUR FILE: Submission: Registration No. (OATS 1): 4437A-1 Registration No. (OATS 2): 4437A-2 Registration No. (OATS 3): 4437A-3 Registration No. (OATS 4): 4437A-4 Japan Electrical Safety & Environment Technology Laboratories (JET) Registration No.: 04S03-01 Site Accreditation : Bureau of Standards and Metrology and Inspection (BSMI) Taiwan, R.O.C. Accreditation No.: SL2-IN-E-0026 for CNS13438 / CISPR22 SL2-R1-E-0026 for CNS13439 / CISPR13 SL2-R2-E-0026 for CNS13439 / CISPR13 SL2-A1-E-0026 for CNS / CISPR14-1 Taiwan Accreditation Foundation (TAF) Accreditation No.: 1113 TüV NORD Certificate No: TNTW0801R-01

8 Report No.: 9A042401C1 Page 7 of Measurement Uncertainty No. Item Value 1 Power Line Conducted Emission (Conduction 1) 2.40 db 2 Power Line Conducted Emission (Conduction 2) 2.40 db 3 Disturbance Power Emission (Conduction 2) 3.10 db 4 Click disturbances Emission (Conduction 2) 2.40 db 5 Radiated Electromagnetic disturbance (Loop Antenna) 4.80 db 6 Radiated Emission Test (OATS 1) 3.14 db 7 Radiated Emission Test (OATS 2) 3.14 db 8 Radiated Emission Test (OATS 3) 3.14 db 9 Radiated Emission Test (OATS 4) 3.14 db 10 Radiated Emission Test (1GHz~18GHz) 3.20 db 11 Radiated Emission Test (18GHz~40GHz) 3.40 db

9 Report No.: 9A042401C1 Page 8 of 51 2 Characteristic Test 2.1 Visual Inspection Inspection Requirement The visual inspection shall be carrier out to ensure that the equipment construction meets it s specified requirements Test Procedures Reference to EN clause Inspection Result Pass.

10 Report No.: 9A042401C1 Page 9 of Performance (Supply variations) Instrument Instrument Manufacturer Model Serial No. Next Cal. Date Function Generator SCHAFFNER FG /12/01 Transient Generator SCHAFFNER MT /12/01 Nissan Transient Generator SCHAFFNER NT /12/01 Load Dump Generator SCHAFFNER LD r /12/01 JASO Transient Generator SCHAFFNER JT /12/01 Burst Generator SCHAFFNER FT r /12/01 JASO Load Dump Generator SCHAFFNER JT /12/01 Power Amplifier SCHAFFNER PA /12/01 Note: The above equipments are within the valid calibration period Test Requirement - Supply voltage: (1) rated input voltage *0.7 (2) rated input voltage * Operation function shall be worked normally at the supply variations Test Procedures Reference to EN clause Test Result Temperature: 21.0 ; Humidity: 58 %; Atm pres: 101 Kpa; Test Engineer: Victor Test Mode 1: EUT power (12VDC) (Nominal) Test voltage Result / Observation Nominal * VDC No deviation Nominal * VDC No deviation Nominal * VDC No deviation Test Mode 2: EUT power (24VDC) (Nominal) Test voltage Result / Observation Nominal * VDC No deviation Nominal * VDC No deviation Nominal * VDC No deviation Test Mode 3: EUT power (48VDC) (Nominal) Test voltage Result / Observation Nominal * VDC No deviation Nominal * VDC No deviation Nominal * VDC No deviation 2.3 Performance (Supply interruption)

11 Report No.: 9A042401C1 Page 10 of Instrument Instrument Manufacturer Model Serial No. Next Cal. Date Function Generator SCHAFFNER FG /12/01 Transient Generator SCHAFFNER MT /12/01 Nissan Transient Generator SCHAFFNER NT /12/01 Load Dump Generator SCHAFFNER LD r /12/01 JASO Transient Generator SCHAFFNER JT /12/01 Burst Generator SCHAFFNER FT r /12/01 JASO Load Dump Generator SCHAFFNER JT /12/01 Power Amplifier SCHAFFNER PA /12/01 Note: The above equipments are within the valid calibration period Test Requirement - Supply voltage: rated input voltage. - Interruption classification: Class S1. - Repeated 10 times at random and covered all modes of operation. - Operation function shall be worked normally at supply variations Test Procedures Reference to EN clause Test Result Temperature: 21.0 ; Humidity: 58 %; Atm pres: 101 Kpa; Test Engineer: Victor Test Mode 1: EUT power (12VDC) (Nominal) Supply interruption Repeated time Result / Observation 100% 10 ms Deviation Test Mode 2: EUT power (24VDC) (Nominal) Supply interruption Repeated time Result / Observation 100% 10 ms No deviation Test Mode 3: EUT power (48VDC) (Nominal) Supply interruption Repeated time Result / Observation 100% 10 ms No deviation Note: Deviation : During the test at connection was disconnected, and restored automatically after the test.

12 Report No.: 9A042401C1 Page 11 of Performance (Supply change over) Instrument Instrument Manufacturer Model Serial No. Next Cal. Date Function Generator SCHAFFNER FG /12/01 Transient Generator SCHAFFNER MT /12/01 Nissan Transient Generator SCHAFFNER NT /12/01 Load Dump Generator SCHAFFNER LD r /12/01 JASO Transient Generator SCHAFFNER JT /12/01 Burst Generator SCHAFFNER FT r /12/01 JASO Load Dump Generator SCHAFFNER JT /12/01 Power Amplifier SCHAFFNER PA /12/01 Note: The above equipments are within the valid calibration period Test Requirement - Class C1 at 0.6 Un during 100ms (without interruptions) - Class C2 during a supply break of 30ms Test Procedures Reference to EN clause Test Result Temperature: 21.0 ; Humidity: 58 %; Atm pres: 101 Kpa; Test Engineer: Victor Test Mode 1: EUT power (12VDC) (Nominal) Supply Voltage Repeated time Result / Observation Dips 40% 100 ms Deviation Interruptions 100% 30 ms Deviation Test Mode 2: EUT power (24VDC) (Nominal) Supply Voltage Repeated time Result / Observation Dips 40% 100 ms No deviation Interruptions 100% 30 ms Deviation Test Mode 3: EUT power (48VDC) (Nominal) Supply Voltage Repeated time Result / Observation Dips 40% 100 ms No deviation Interruptions 100% 30 ms No deviation Note: Deviation : During the test at connection was disconnected, and restored automatically after the test.

13 Report No.: 9A042401C1 Page 12 of Insulation Test Instrument Instrument Manufacturer Model Serial No. Next Cal. Date Withstand Voltage/insulation tester EXTECH /12/22 Note: The above equipments are within the valid calibration period Test Requirement 1. Insulation measurement Test: 500VDC - The insulation resistance test shall be carried out at 500 VDC and the values recorded. - The test shall then be repeated after the voltage withstand test. - There shall be no fundamental deterioration from the initial measurement. 2. Voltage withstand test: 1500VDC V for nominal battery voltages below 72 V (or 50 VAC) V for nominal battery voltages from 72 V up to 125 V, (or from 50 to 90 VAC), and V for nominal battery voltages above 125 V and up to 315 V, (or from 90 to 225 VAC) - Neither disruptive discharge nor flashover shall occur Test Procedures Reference to EN clause Test Result Temperature: 23.5 ; Humidity: 57 %; Atm pres: 101 Kpa; Test Engineer: Victor Test Mode 1: EUT power (12VDC) (Nominal) 1. Insulation measurement Test: 500VDC Test Item RJ45 Pin to ground (Before voltage withstand test) RJ45 Pin to Ground (After voltage withstand test) Power input terminal to ground Resistance 500 kω 500 kω 500 kω 2. Voltage withstand test: 500VDC Test Item RJ45 and power input terminal to ground Result & Status No disruptive and flashover

14 Report No.: 9A042401C1 Page 13 of 51 3 Electromagnetic compatibility (EMC) 3.1 Supply Overvoltages Instrument Instrument Manufacturer Model Serial No. Next Cal. Date Function Generator SCHAFFNER FG /12/01 Transient Generator SCHAFFNER MT /12/01 Nissan Transient Generator SCHAFFNER NT /12/01 Load Dump Generator SCHAFFNER LD r /12/01 JASO Transient Generator SCHAFFNER JT /12/01 Burst Generator SCHAFFNER FT r /12/01 JASO Load Dump Generator SCHAFFNER JT /12/01 Power Amplifier SCHAFFNER PA /12/01 Note: The above equipments are within the valid calibration period Test Requirement Reference to EN clause Voltage level (minimum): 1.4 Un - Duration d (maximum): 0.1s - Duration D (maximum): 1.0s - Series resistor Rs (Tol. ±10%): 1Ω Performance criterion: PASS Test Procedures Reference to EN clause Test Result Temperature: 21.0 ; Humidity: 58 %; Atm pres: 101 Kpa; Test Engineer: Victor Test Mode 1: EUT power (12VDC) (Nominal) Voltage level (minimum) Duration d (maximum) Duration D (maximum) Series resistor Rs (Tol. ±10%) Result / Observation 16.8VDC 0.1s 1.0s 1Ω No deviation Test Mode 2: EUT power (24VDC) (Nominal) Voltage level (minimum) Duration d (maximum) Duration D (maximum) Series resistor Rs (Tol. ±10%) Result / Observation 33.6VDC 0.1s 1.0s 1Ω No deviation Test Mode 3: EUT power (48VDC) (Nominal) Voltage level (minimum) Duration d (maximum) Duration D (maximum) Series resistor Rs (Tol. ±10%) Result / Observation 67.2VDC 0.1s 1.0s 1Ω No deviation

15 Report No.: 9A042401C1 Page 14 of Surges Test Instrument Instrument Manufacturer Model Serial No. Next Cal. Date EMC Pro Systems KeyTek EMC Pro /03/15 Surge Telecom Box KeyTek CM-TELCD N. C. R. Note: The above equipments are within the valid calibration period Test Requirement Reference to EN clause and EN table 7 Input AC power ports: Line to Neutral: ±1kV (peak), 1.2/50 us, 42Ω, 0.5µF Line (Neutral) to earth: ±2kV (peak), 1.2/50 us, 42Ω, 0.5µF Input DC power ports: Line to Neutral: ±1kV (peak), 1.2/50 us, 42Ω, 0.5µF Line (Neutral) to earth: ±2kV (peak), 1.2/50 us, 42Ω, 0.5µF Signal and telecommunication ports: ±2kV(peak): 1.2/50 us, 42Ω, 0.5µF Performance criterion: B Test Procedures Reference to IEC clause Test Result Temperature: 24.0 ; Humidity: 59 %; Atm pres: 101 Kpa; Test Engineer: Victor PASS. Test Mode 1: EUT power (12VDC) ±0.5kV (peak) Input DC power port: Line to line Performance criterion: A B C ±1.0kV(peak) Input DC power port: Line to line Performance criterion: A B C ±0.5kV (peak) Input DC power port: Line to earth (ground) Performance criterion: A B C ±1.0kV(peak) Input DC power port: Line to earth (ground) Performance criterion: A B C ±2.0kV(peak) Input DC power port: Line to earth (ground) Performance criterion: A B C ±2.0 kv (peak) Signal and telecommunication ports: RJ45 Performance criterion: A B C * A : The apparatus shall continue to operate as intended during and after the test, no degradation of performance or loss of function. * B : During the test at the EUT stay at stand by mode, and restored connection automatically after the test.

16 Report No.: 9A042401C1 Page 15 of Electrostatic Discharge Test Instrument Instrument Manufacturer Model Serial No. Next Cal. Date ESD Simulator EMC PARTNER ESD /10/19 Note: The above equipments are within the valid calibration period Test Requirement Reference to EN clause and EN table 9 Air discharge: ±8 KV Contact discharge: ±6 kv Indirect discharge: ±6 kv Performance criterion: B Test Procedures Reference to IEC clause Test Result Temperature: 23.5 ; Humidity: 57 %; Atm pres: 101 Kpa; Test Engineer: Victor PASS. Test Mode 1: EUT power (12VDC) Air discharge ±2 kv, ±4 kv, ±8 kv, ±15 kv: A B C Contact discharge ±2 kv, ±4 kv, ±6 kv, ±8 kv: A B C Indirect discharge (HCP) ±2 kv, ±4 kv, ±6 kv, ±8 kv: A B C Indirect discharge (VCP Front, Left, Back, Right) ±2 kv, ±4 kv, ±6 kv, ±8 kv: A B C * A : The apparatus shall continue to operate as intended during and after the test, no degradation of performance or loss of function.

17 Report No.: 9A042401C1 Page 16 of 51 View of Discharge Point-1 (Green: Air discharge; Red: Contact discharge) View of Discharge Point-2 (Green: Air discharge; Red: Contact discharge)

18 Report No.: 9A042401C1 Page 17 of Transient Burst Susceptibility Test Instrument Instrument Manufacturer Model Serial No. Next Cal. Date EMC Pro System KeyTek EMC Pro /03/16 EFT Clamp KeyTek PRO-CCL-C N. C. R. Note: The above equipments are within the valid calibration period Test Requirement Reference to EN clause and EN table 7 & 8 5 khz Repetition frequency ±2.0 kv input AC power ports. ±2.0 kv input DC power ports. ±2.0 kv for Signal ports. Performance criterion: A Test Procedures Reference to IEC clause Test Result Temperature: 23.5 ; Humidity: 57 %; Atm pres: 101 Kpa; Test Engineer: Victor PASS. Test Mode 1: EUT power (12VDC) ±4.0 kv input DC power port: Line+ Neutral + PE Performance criterion: A B C ±2.0 kv On I/O (input/output) signal, data and control port: RJ45 Performance criterion: A B C * A : The apparatus shall continue to operate as intended during and after the test, no degradation of performance or loss of function.

19 Report No.: 9A042401C1 Page 18 of Radio- Frequency, Electromagnetic Field Immunity Test Instrument Instrument Manufacturer Model Serial No. Next Cal. Date RF Power Amplifier (80MHz~1GHz) Frankonia FLG-200B 1038 N. C. R RF Power Amplifier (1GHz~3GHz) Frankonia FLG-50C 1013 N. C. R Directional Coupler (80MHz~1GHz) Werlatone C N. C. R Directional Coupler (1GHz~3GHz) Werlatone C N. C. R Bilog Antenna (20MHz~3GHz) Frankonia BTA-M 06012M N. C. R Signal Generator R&S SM /10/14 RF Power Meter Anritsu ML2945A /10/16 Electric Field Probe Narda 2244/90.21 BF /11/06 Field-strength-meter Narda EMR-20 BC /11/06 Note: The above equipments are within the valid calibration period Test Requirement Reference to EN clause and EN table 9 The frequency steps: 1%, Log sweep, Dwell time: 3.0 sec. Frequency range: 80 to 1000 MHz, Field strength: 20 V/m, 80% AM (1kHz), (Note: For equipment mounted in network communication center a severity level of 10V/m may be used.) Frequency range: 1400 to 2100 MHz, Field strength: 10 V/m, 80% AM (1kHz), Frequency range: 2100 to 2500 MHz, Field strength: 5 V/m, 80% AM (1kHz), Performance criterion: A Test Procedures Reference to IEC clause Test Result Temperature: 23.0 ; Humidity: 57 %; Atm pres: 101 Kpa; Test Engineer: Victor PASS. Test Mode 1: EUT power (12VDC) Frequency range: 80 to 1000 MHz, Field strength: 20 V/m, 80% AM (1kHz), Performance criterion: A B C Frequency range: 1400 to 2100 MHz, Field strength: 10 V/m, 80% AM (1kHz), Performance criterion: A B C Frequency range: 2100 to 2500 MHz, Field strength: 5 V/m, 80% AM (1kHz), Performance criterion: A B C * A : The apparatus shall continue to operate as intended during and after the test, no degradation of performance or loss of function.

20 Report No.: 9A042401C1 Page 19 of Radio- Frequency, Conducted Disturbances Immunity Test Instrument Instrument Manufacturer Model Serial No. Next Cal. Date Signal Generator R&S SMY / /07/20 Power Amplifier Frankonia CIT D1278 N. C. R. Coupler WERLATONE C N. C. R. Attenuator SCHAFFNER ATN N. C. R. M3 C.D.N FCC FCC-801-M3-25A 2045 N. C. R. M2 C.D.N SCHAFFNER M N. C. R. EM-CLAMP SCHAFFNER KEMZ N. C. R. Note: The above equipments are within the valid calibration period Test Requirement Reference to EN clause and EN table 7 & 8 Frequency range: 0.15 to 80 MHz, Field strength: 10 V, 80% AM (1kHz) Input AC power ports. Input DC power ports. Signal and telecommunication ports. Performance criterion: A Test Procedures Reference to EN clause Test Result Temperature: 21.0 ; Humidity: 55 %; Atm pres: 101 Kpa; Test Engineer: Victor PASS. Test Mode 1: EUT power (12VDC) Frequency range: 0.15 to 80 MHz, Field strength: 10 V, 80% AM (1kHz), Input DC power port. Performance criterion: A B C Signal and telecommunication port. Performance criterion: A B C * A : The apparatus shall continue to operate as intended during and after the test, no degradation of performance or loss of function.

21 Report No.: 9A042401C1 Page 20 of Power Line Conducted Emission Instrument Instrument Manufacturer Model Serial No. Next Cal. Date EMI Test Receiver Rohde & Schwarz ESCS / /08/19 Pulse Limiter Rohde & Schwarz ESH3-Z / /09/08 RF Cable HARBOUR RG400 CBL /03/16 L.I.S.N. Schwarzbeck NNLK /07/21 L.I.S.N. Rohde & Schwarz ESH3-Z /02/18 Note: The above equipments are within the valid calibration period Test Requirement Reference to EN clause and EN table 5 Frequency (MHz) Q.P. (Quasi-Peak) 0.15 ~ ~ Test Procedures Reference to EN clause Test Result PASS. The final test data is shown on as following pages. Mode 1: Working Mode (DC Power Port)

22 Report No.: 9A042401C1 Page 21 of 51 EUT: Industrial IEEE a/b/g Dual-RF AP/Bridge/Client CLIENT: MOXA Inc. MODEL: AWK-5222 RATING: DC 12V Temperature: 25.0 Humidity: 68 % Power Line Conducted Test Data POLARITY: Line DISTANCE: Serial No.: FILE/DATA#: MOXA Inc.emi/61 OPERATOR: Terry TEST SITE: Conduction1 Frequency Factor Meter Reading (dbµv) Emission Level (dbµv) Limits (dbµv) Margin (db) (MHz) (db) Quasi-Peak Average Quasi-Peak Average Quasi-Peak Average Quasi-Peak Average Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Test Mode: Mode 1: Working Mode (DC Power Port)

23 Report No.: 9A042401C1 Page 22 of 51 EUT: Industrial IEEE a/b/g Dual-RF AP/Bridge/Client CLIENT: MOXA Inc. MODEL: AWK-5222 RATING: DC 12V Temperature: 25.0 Humidity: 68 % Power Line Conducted Test Data POLARITY: Neutral DISTANCE: Serial No.: FILE/DATA#: MOXA Inc.emi/60 OPERATOR: Terry TEST SITE: Conduction1 Frequency Factor Meter Reading (dbµv) Emission Level (dbµv) Limits (dbµv) Margin (db) (MHz) (db) Quasi-Peak Average Quasi-Peak Average Quasi-Peak Average Quasi-Peak Average Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Test Mode: Mode 1: Working Mode (DC Power Port)

24 Report No.: 9A042401C1 Page 23 of 51 Front View Rear View

25 Report No.: 9A042401C1 Page 24 of Radiated emission Instrument Instrument Manufacturer Model Serial No. Next Cal. Date EMI Test Receiver Rohde & Schwarz ESCS /09/10 Bilog Antenna Schaffner CBL6111c /02/22 Pre-Amplifier Agilent 8447D 1937A /12/08 RF Cable IETC CBL15 CBL /11/18 Note: The above equipments are within the valid calibration period Test Requirement Reference to EN clause and EN table 6 Frequency (MHz) Quasi-Peak db(µv/m) 30 ~ ~ Test Procedures Reference to EN clause Test Result PASS. The final test data is shown on as following pages. Mode 1: Working Mode (DC Power Port)

26 Report No.: 9A042401C1 Page 25 of 51 Radiated Emission Measurement Data EUT: Industrial IEEE a/b/g Dual-RF AP/Bridge/Client POLARITY: Horizontal DISTANCE: 10 m CLIENT: MOXA Inc. MODEL: AWK-5222 RATING: DC 12V Temperature: 23.0 Serial No.: FILE/DATA#: MOXA Inc.emi/22 OPERATOR: Edison TEST SITE: OATS1 Humidity: 55 % Frequency Factor Meter Reading Emission Level Limits Margin (MHz) (db) (dbµv) (dbµv/m) (dbµv/m) (db) ** ** ** ** ** ** ** Remark: 1. * Mark means readings are Peak Values. 2. ** Mark means readings are Quasi-Peak values. 3. Factor = Antenna Factor + Cable Loss Pre-amplifier. Test Mode: Mode 1: Working Mode (DC Power Port)

27 Report No.: 9A042401C1 Page 26 of 51 Radiated Emission Measurement Data EUT: Industrial IEEE a/b/g Dual-RF AP/Bridge/Client POLARITY: Vertical DISTANCE: 10 m CLIENT: MOXA Inc. MODEL: AWK-5222 RATING: DC 12V Temperature: 23.0 Serial No.: FILE/DATA#: MOXA Inc.emi/21 OPERATOR: Edison TEST SITE: OATS1 Humidity: 55 % Frequency Factor Meter Reading Emission Level Limits Margin (MHz) (db) (dbµv) (dbµv/m) (dbµv/m) (db) ** ** ** ** ** ** Remark: 1. * Mark means readings are Peak Values. 2. ** Mark means readings are Quasi-Peak values. 3. Factor = Antenna Factor + Cable Loss Pre-amplifier. Test Mode: Mode 1: Working Mode (DC Power Port)

28 Report No.: 9A042401C1 Page 27 of 51 Front View Rear View

29 Report No.: 9A042401C1 Page 28 of 51 4 Environmental Tests 4.1 Cooling Test Instrument Instrument Manufacturer Model Serial No. Programmable Temperature & Humidity Chamber KSON THS-E4T-150 N/A Sample Configuration & Quantity Under Test: Test Environmental Curve: Criterion: After completion of test then conduct functional test and check for the electrical and mechanical irregularity can not over specification Test Result PASS.

30 Report No.: 9A042401C1 Page 29 of Dry Heat Test Instrument Instrument Manufacturer Model Serial No. Programmable Temperature & Humidity Chamber KSON THS-E4T-150 N/A Sample Configuration & Quantity Under Test: Test Environmental Curve: Criterion: After completion of test then conduct functional test and check for the electrical and mechanical irregularity can not over specification Test Result PASS.

31 Report No.: 9A042401C1 Page 30 of Vibration Test Instrument Instrument Manufacturer Model Serial No. Vibration Tester KING DESIGN KD-9363EM-1000F2K-50N120 GUG Controller DACTRON FRONT-End Box Control Accelerometer B&K Test ambience Temperature: 26.2 (25±10 ) Humidity: 64%RH (60±20% RH) Test Requirement Reference to EN section Random vibration test (Operation) Frequency: 5Hz to 150Hz Acceleration: 0.7 m/s 2 rms (Longitudinal) 0.7 m/s 2 rms (Transverse) 1.0 m/s 2 rms (Vertical) P.S.D: m/s 2 /Hz (5Hz to 20Hz) (Longitudinal) m/s 2 /Hz (5Hz to 20Hz) (Transverse) m/s 2 /Hz (5Hz to 20Hz) (Vertical) -6dB/oct (20 Hz to 150Hz) Test Axis: Longitudinal, Transverse, Vertical Axis Test Time: 10 mins (Each Axis) Total Test Time: 30 mins 2. Random vibration test (Non-Operation) Frequency: 5Hz to 150Hz Acceleration: 5.5 m/s 2 rms (Longitudinal) 5.5 m/s 2 rms (Transverse) 7.9 m/s 2 rms (Vertical) P.S.D: m/s 2 /Hz (5Hz to 20Hz) (Longitudinal) m/s 2 /Hz (5Hz to 20Hz) (Transverse) m/s 2 /Hz (5Hz to 20Hz) (Vertical) -6dB/oct (20 Hz to 150Hz) Test Axis: Longitudinal, Transverse, Vertical Axis Test Time: 5 hrs (Each Axis) Total Test Time: 15 hrs Test Procedures Reference to EN Test Result Describe PASS FAIL Non-Judgment Function judgment Appearance check -- --

32 Report No.: 9A042401C1 Page 31 of 51 Testing Photos (Operation) Longitudinal Transverse Vertical

33 Report No.: 9A042401C1 Page 32 of 51 Testing Photos (Non-Operation) Longitudinal Transverse Vertical

34 Report No.: 9A042401C1 Page 33 of 51 Testing Photos After Test

35 Report No.: 9A042401C1 Page 34 of 51

36 Report No.: 9A042401C1 Page 35 of 51

37 Report No.: 9A042401C1 Page 36 of 51

38 Report No.: 9A042401C1 Page 37 of Shock Test Instrument Instrument Manufacturer Model Serial No. Vibration Tester KING DESIGN KD-9363EM-1000F2K-50N120 GUG Controller DACTRON FRONT-End Box Control Accelerometer B&K Test ambience Temperature: 26.2 (25±10 ) Humidity: 64%RH (60±20% RH) Test Requirement Reference to EN section Wave Form: Half Sine Wave Acceleration: 50 m/s 2 Duration Time: 30 ms Shock Direction: ±Longitudinal, ±Transverse, ±Vertical axis No. of Shock: Each axis 3 times Total Test Time: 18 times Test Procedures Reference to EN Test Result Describe PASS FAIL Non-Judgment Function judgment Appearance check -- --

39 Report No.: 9A042401C1 Page 38 of 51 Testing Photos (Shock Test) +Longitudinal -Longitudinal +Transverse -Transverse +Vertical -Vertical

40 Report No.: 9A042401C1 Page 39 of 51 Testing Photos After Test

41 Report No.: 9A042401C1 Page 40 of 51

42 Report No.: 9A042401C1 Page 41 of 51

43 Report No.: 9A042401C1 Page 42 of 51

44 Report No.: 9A042401C1 Page 43 of 51 5 Photographs of EUT Front View of EUT Rear View of EUT

45 Report No.: 9A042401C1 Page 44 of 51 Inner View of EUT-1 Inner View of EUT-2

46 Report No.: 9A042401C1 Page 45 of 51 Inner View of EUT-3 Inner View of EUT-4

47 Report No.: 9A042401C1 Page 46 of 51 Inner View of EUT-5 Inner View of EUT-6

48 Report No.: 9A042401C1 Page 47 of 51 Front View of Main Board-1 Rear View of Main Board-1

49 Report No.: 9A042401C1 Page 48 of 51 Front View of Main Board-2 Rear View of Main Board-2

50 Report No.: 9A042401C1 Page 49 of 51 Front View of WLAN Board (Module A) Rear View of WLAN Board (Module A)

51 Report No.: 9A042401C1 Page 50 of 51 Front View of WLAN Board (Module B) Rear View of WLAN Board (Module B)

52 Report No.: 9A042401C1 Page 51 of 51 View of Antenna Antenna Connector