EL5102, EL5103, EL5202, EL5203, EL5302
|
|
- Wilfred Warner
- 5 years ago
- Views:
Transcription
1 EL, EL, EL, EL, EL Data Sheet June, 6 FN7.6 MHz Slew Enhanced VFs The ELx and ELx families represent highspeed VFs based on a CF amplifier architecture. This gives the typical high slew rate benefits of a CF family along with the stability and ease of use associated with the VF type architecture. With slew rates of V/µs, this family of devices enables the use of voltage feedback amplifiers in a space where the only alternative has been current feedback amplifiers. This family will also be available in single, dual, and triple versions, with MHz, MHz, and 7MHz versions. These are all available in single, dual, and triple versions. Both families operate on single V or ±V supplies from minimum supply current. ELx also features an output enable function, which can be used to put the output in to a highimpedance mode. This enables the outputs of multiple amplifiers to be tied together for use in multiplexing applications. Typical applications for these families will include cable driving, filtering, tod and Dto buffering, multiplexing and summing within video, communications, and instrumentation designs. Features Operates off V, V, or ±V applications Powerdown to µ (ELx) db bandwidth = MHz ±.db bandwidth = MHz Low supply current = m Slew rate = V/µs Low offset voltage = mv max Output current = m VOL = Diff gain/phase =.%/. PbFree plus anneal available (RoHS compliant) pplications Video amplifiers PCMCI applications /D drivers Line drivers Portable computers High speed communications RGB applications Broadcast equipment ctive filtering CUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 888INTERSIL or Intersil (and design) is a registered trademark of Intersil mericas Inc. Copyright Intersil mericas Inc. 6. ll Rights Reserved ll other trademarks mentioned are the property of their respective owners.
2 EL, EL, EL, EL, EL Ordering Information PRT NUMBER PRT MRKING PCKGE TPE & REEL PKG. DWG. # ELIS IS 8 Ld SOIC MDP7 ELIST7 IS 8 Ld SOIC 7 MDP7 ELIST IS 8 Ld SOIC MDP7 ELISZ ELISZT7 ELISZT ISZ ISZ ISZ 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC ELIWT7 q 6 Ld SOT 7 (K pcs) ELIWT7 q 6 Ld SOT 7 ( pcs) ELIWZT7 ELIWZT7 BBS BBS 6 Ld SOT 6 Ld SOT MDP7 7 MDP7 MDP7 7 (K pcs) 7 ( pcs) ELICT7 B Ld SC7 7 (K pcs) ELICT7 B Ld SC7 7 ( pcs) ELIWT7 g Ld SOT 7 (K pcs) ELIWZT7 BBT Ld SOT ELIWZT7 BBT Ld SOT 7 (K pcs) 7 ( pcs) MDP8 MDP8 MDP8 MDP8 P.9 P.9 MDP8 MDP8 MDP8 ELIY BR Ld MSOP MDP ELIYT7 BR Ld MSOP 7 MDP Ordering Information (Continued) PRT NUMBER ELISZT7 ELISZT ISZ ISZ 8 Ld SOIC 8 Ld SOIC 7 MDP7 MDP7 ELIY BS 8 Ld MSOP MDP ELIYT7 BS 8 Ld MSOP 7 MDP ELIYT BS 8 Ld MSOP MDP ELIYZ ELIYZT7 ELIYZT BE BE BE 8 Ld MSOP 8 Ld MSOP 8 Ld MSOP MDP 7 MDP MDP ELIU IU 6 Ld QSOP MDP ELIUT7 IU 6 Ld QSOP 7 MDP ELIUT IU 6 Ld QSOP MDP ELIUZ ELIUZT7 ELIUZT PRT MRKING IUZ IUZ IUZ PCKGE 6 Ld QSOP 6 Ld QSOP 6 Ld QSOP TPE & REEL PKG. DWG. # MDP 7 MDP MDP NOTE: Intersil Pbfree plus anneal products employ special Pbfree material sets; molding compounds/die attach materials and % matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pbfree soldering operations. Intersil Pbfree products are MSL classified at Pbfree peak reflow temperatures that meet or exceed the Pbfree requirements of IPC/JEDEC J STD ELIYT BR Ld MSOP MDP ELIYZ BD Ld MSOP MDP ELIYZT7 BD Ld MSOP 7 MDP ELIYZT BD Ld MSOP MDP ELIS IS 8 Ld SOIC MDP7 ELIST7 IS 8 Ld SOIC 7 MDP7 ELIST IS 8 Ld SOIC MDP7 ELISZ ISZ 8 Ld SOIC MDP7 FN7.6 June, 6
3 EL, EL, EL, EL, EL Pinouts EL (6 LD SOT) TOP VIEW EL ( LD SOT) TOP VIEW OUT 6 VS OUT VS IN CE IN VS IN VS IN EL (8 LD SOIC) TOP VIEW EL (8 LD SOIC, MSOP) TOP VIEW NC 8 CE OUT 8 VS IN 7 6 VS OUT NC 7 6 IN VS IN IN VS OUTB INB INB EL ( LD MSOP) TOP VIEW EL (6 LD QSOP) TOP VIEW OUT VS IN 6 IN OUT IN IN IN VS IN CE VS CEB OUT VS OUTB CE 6 CE INB INB NC CEC INC NC OUTC INC FN7.6 June, 6
4 EL, EL, EL, EL, EL bsolute Maximum Ratings (T = C) Supply Voltage between V S and GND V Maximum Supply Slewrate between V S and V S V/µs Input Voltage ±V S Differential Input Voltage ±V Maximum Continuous Output Current m Maximum Current into I N, I N, CE ±m Power Dissipation See Curves Storage Temperature Range C to C mbient Operating Temperature Range C to 8 C Operating Junction Temperature C CUTION: Stresses above those listed in bsolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTNT NOTE: ll parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: T J = T C = T DC Electrical Specifications V S = V, V S = V, T = C, R L = Ω, V ENBLE = V, unless otherwise specified. PRMETER DESCRIPTION CONDITIONS MIN TYP MX UNIT V OS Offset Voltage EL, EL, EL, EL mv EL 8 mv TCV OS Offset Voltage Temperature Coefficient Measured from T MIN to T MX µv/ C IB Input Bias Current V IN = V µ I OS Input Offset Current V IN = V 8 8 µ TCI OS Input Bias Current Temperature Coefficient Measured from T MIN to T MX n/ C PSRR Power Supply Rejection Ratio V S = ±.7V to ±.V 7 8 db CMRR Common Mode Rejection Ratio V CM = V to.v 6 8 db CMIR Common Mode Input Range Guaranteed by CMRR test ±. V R IN Input Resistance Common mode kω C IN Input Capacitance SO package pf I S,ON Supply Current Enabled per amplifier.6..8 m I S,OFF Supply Current Shutdown per amplifier V S µ V S 7 µ VOL Open Loop Gain V OUT = ±.V, R L = kω to GND 8 66 db V OUT = ±.V, R L = Ω to GND 6 db V OUT Output Voltage Swing R L = kω to GND ±. ±.9 V R L = Ω to GND ±. ±.7 V I OUT Output Current V =, R L = Ω to V ±8 ± m V CE ON CE Pin Voltage for Powerup (V S ) (V S ) V V CE OFF CE Pin Voltage for Shutdown (V S ) V S V I EN ON Pin Current Enabled CE = V µ I EN OFF Pin Current Disabled CE = V µ FN7.6 June, 6
5 EL, EL, EL, EL, EL Closed Loop C Electrical Specifications V S = V, V S = V, T = C, V ENBLE = V, V =, R F = Ω, R L = Ω to GND pin, unless otherwise specified. (Note ) PRMETER DESCRIPTION CONDITIONS MIN TYP MX UNIT BW db Bandwidth (V OUT = mv PP ) V =, R F = Ω MHz SR Slew Rate V =, R L = Ω, V OUT = V to V V/µs R L = Ω, V OUT = V to V V/µs t R,t F Rise Time, Fall Time ±.V step.8 ns OS Overshoot ±.V step % t S.% Settling Time V S = ±V, R L = Ω, V =, V OUT = ±V ns dg Differential Gain (Note ) V =, R F = kω. % dp Differential Phase (Note ) V =, R F = kω. e N Input Noise Voltage f = khz nv/ Hz i N Input Noise Current f = khz p/ Hz t DIS Disable Time (Note ) ns t EN Enable Time (Note ) ns NOTES:. ll C tests are performed on a warmed up part, except slew rate, which is pulse tested.. Standard NTSC signal = 86mV PP, f =.8MHz, as V IN is swept from.6v to.v.r L is DC coupled.. Disable/Enable time is defined as the time from when the logic signal is applied to the ENBLE pin to when the supply current has reached half its final value. FN7.6 June, 6
6 Typical Performance Curves EL, EL, EL, EL, EL V = R F = R L =Ω C L =.pf db 8MHz. PHSE ( ) V = R F = R L =Ω C L =.pf. FIGURE. GIN vs FREQUENCY (db BNDWIDTH) FIGURE. PHSE vs FREQUENCY V = R F = R L =Ω C L =.pf.db MHz FIGURE..dB BNDWIDTH GIN (db) 7 6 R L =Ω GIN=dB or FREQ.=.6 MHz GIN BW PRODUCT=.6x=6MHz FIGURE. GIN BNDWIDTH PRODUCT GINBNDWIDTH PRODUCT (MHz) R L =Ω SUPPLY VOLTGES (±V) R L =Ω C L =.pf V = R F =.6K, R G = V = R F =R G =Ω V = R F =. FIGURE. GIN BNDWIDTH PRODUCT vs SUPPLY VOLTGES FIGURE 6. GIN vs FREQUENCY FOR VRIOUS V 6 FN7.6 June, 6
7 EL, EL, EL, EL, EL Typical Performance Curves (Continued) V = R F = R L =Ω C L =.pf V S =±6 V S =±V V S =±V V S =±.V. V =±V S V = R F = C L =.pf R L =Ω R L=kΩ R L =Ω R L =7Ω R L =Ω. FIGURE 7. GIN vs FREQUENCY FOR VRIOUS ±V S FIGURE 8. GIN vs FREQUENCY FOR VRIOUS R LOD ( V = ) V = R F =Ω C L =.9pF R L =Ω R L =kω R L =Ω R L =7Ω R L =Ω. FIGURE 9. GIN vs FREQUENCY FOR VRIOUS R LOD ( V = ) V = R F =Ω C L =.9pF R L =Ω R L =7Ω R L =Ω R L =kω R L =Ω. FIGURE. GIN vs FREQUENCY FOR VRIOUS R LOD ( V = ) V = R F = R L =Ω C L =pf C L =8.pF C L =.pf C L =pf C L =7pF V = R F =Ω R L =Ω C L =pf C L =8pF C L =8.pF C L =pf C L =7pF.. FIGURE. GIN vs FREQUENCY FOR VRIOUS C LOD ( V =) FIGURE. GIN vs FREQUENCY FOR VRIOUS C LOD ( V = ) 7 FN7.6 June, 6
8 EL, EL, EL, EL, EL Typical Performance Curves (Continued) C V = C L =pf L =pf R F =Ω C L =pf R L =Ω C L =6pF C L =pf. V = R L =Ω C L =pf R F =Ω R F =Ω R F =Ω R F =Ω R F =Ω. FIGURE. GIN vs FREQUENCY FOR VRIOUS C LOD ( V =) FIGURE. GIN vs FREQUENCY FOR VRIOUS R F ( V = ) R F =.kω V = R L =Ω R C L =8pF F = 68Ω R F =Ω R F =7Ω R F =Ω. V = R L =Ω C L =pf R F =Ω R F =kω R F =kω R F =kω R F =Ω. FIGURE. GIN vs FREQUENCY FOR VRIOUS R F ( V = ) FIGURE 6. GIN vs FREQUENCY FOR VRIOUS R F ( V = ) V = R F =RG=Ω R L =Ω C L =8pF C IN =.pf C IN =.pf C IN =pf C IN =pf C IN =.7pF. FIGURE 7. GIN vs FREQUENCY FOR VRIOUS C IN () ( V = ) V = R G =Ω R L =6Ω C L =pf C IN =8.pF C IN =6.8pF C IN =pf C IN =.7pF C IN =pf. FIGURE 8. GIN vs FREQUENCY FOR VRIOUS C IN () ( V = ) 8 FN7.6 June, 6
9 EL, EL, EL, EL, EL Typical Performance Curves (Continued) GIN (db) GIN V CC =V V 6 EE =V K K K M M M G FREQUENCY (Hz) PHSE PHSE ( ) OUTPUT IMPEDNCE (Ω).. V = K K M M M FREQUENCY (Hz) FIGURE 9. OPEN LOOP GIN ND PHSE vs FREQUENCY FIGURE. OUTPUT IMPEDNCE/PHSE vs FREQUENCY CMRR (db) V = K K K M M M M FREQUENCY (Hz) PSRR (db) 6 7 V = PSRR 8 PSRR 9 K K K M M M M FREQUENCY (Hz) FIGURE. CMRR vs FREQUENCY FIGURE. PSRR vs FREQUENCY MX OUTPUT VOLTGE SWING (Vpp) 9 R LOD =kω V = R F =R G =Ω R LOD =Ω C L =8pF. GROUP DELY (ns) V = R F = R L =Ω. FIGURE. MX OUTPUT VOLTGE SWING vs FREQUENCY FIGURE. GROUP DELY vs FREQUENCY 9 FN7.6 June, 6
10 EL, EL, EL, EL, EL Typical Performance Curves (Continued) ISOLTION (db) V = R F = CHIP DISBLED OUTPUT to INPUT INPUT to OUTPUT. GIN (db) V = R F = R L =Ω NOTE: This was done on the EL (Dual Opmps) in to B Out B in to Out. FIGURE. INPUT ND OUTPUT ISOLTION FIGURE 6. CHNNEL TO CHNNEL ISOLTION HRMONIC DISTORTION (dbc) V = R F = R L =Ω C L =.pf V OUT =Vpp nd HD T.H.D 9 rd HD. FUNDMENTL THD (dbc) V = R G =Ω R F =6Ω R L =Ω C L =pf F IN =MHz F IN =MHz OUTPUT VOLTGES (Vpp) FIGURE 7. HRMONIC DISTORTION vs FREQUENCY FIGURE 8. TOTL HRMONIC DISTORTION vs OUTPUT VOLTGES MPLITUDE (V) 6 ENBLE SIGNL OUTPUT SIGNL TIME (ns) FIGURE 9. TURNON TIME V = R F = R L =Ω V OUT =Vpp MPLITUDE (V) 6 V = R F = R L =Ω V OUT =Vpp DISBLE SIGNL OUTPUT SIGNL TIME (ns) FIGURE. TURNOFF TIME FN7.6 June, 6
11 EL, EL, EL, EL, EL Typical Performance Curves (Continued) NOISE VOLTGE (nv/ Hz) MPLITUDE (V) V = R F = R L =Ω C L =.pf V OUT =mv T RISE =.9ns T FLL =.9ns K K K FREQUENCY (Hz) FIGURE. EQUIVLENT NOISE VOLTGE vs FREQUENCY TIME (ns) FIGURE. SMLL SIGNL STEP RESPONSE_RISE ND FLL TIME MPLITUDE (V) V = R G =Ω R L =Ω C L =pf V OUT =.V T RISE =.ns T FLL =.67ns TIME (ns) SUPPLY CURRENT (m) V = R F = R L =Ω C L =.pf Please note that the curve showed positive Current. The negative current was almost the same SUPPLY VOLTGE (V) FIGURE. LRGE SIGNL STEP RESPONSE_RISE ND FLL TIME FIGURE. SUPPLY CURRENT vs SUPPLY VOLTGE MPLITUDE (dbm) V = R F =6Ω R L =Ω C L =pf Delta IM=()(77)=78dB IP=(78/)=dBm IP (dbm) V = R F =6Ω R L =Ω C L =pf FIGURE. THIRD ORDER IMD INTERCEPT (IP) FIGURE 6. THIRD ORDER IMD INTERCEPT vs FREQUENCY FN7.6 June, 6
12 EL, EL, EL, EL, EL Typical Performance Curves (Continued) JEDEC JESD7 HIGH EFFECTIVE THERML CONDUCTIVITY TEST BORD. JEDEC JESD7 HIGH EFFECTIVE THERML CONDUCTIVITY TEST BORD. POWER DISSIPTION (W) W mw MSOP8/ θ J = C/W SOT/6 θ J = C/W POWER DISSIPTION (W) W.6W QSOP6 θ J = C/W SO8 θ J = C/W MBIENT TEMPERTURE ( C) MBIENT TEMPERTURE ( C) FIGURE 7. PCKGE POWER DISSIPTION vs MBIENT TEMPERTURE FIGURE 8. PCKGE POWER DISSIPTION vs MBIENT TEMPERTURE POWER DISSIPTION (W) JEDEC JESD LOW EFFECTIVE THERML CONDUCTIVITY TEST BORD.7 67mW.6. 88mW.... SOT/6 θ J =6 C/W MSOP8/ θ J =6 C/W POWER DISSIPTION (W) JEDEC JESD LOW EFFECTIVE THERML CONDUCTIVITY TEST BORD mW 78mW SO8 θ J =6 C/W QSOP6 θ J =8 C/W MBIENT TEMPERTURE ( C) MBIENT TEMPERTURE ( C) FIGURE 9. PCKGE POWER DISSIPTION vs MBIENT TEMPERTURE FIGURE. PCKGE POWER DISSIPTION vs MBIENT TEMPERTURE FN7.6 June, 6
13 SOT Package Family EL, EL, EL, EL, EL. C D X C E SETING. C NX e N. C B X 6 e B. M C B D b NX D E D. C X MDP8 SOT PCKGE FMILY SYMBOL SOT SOT6 TOLERNCE.. MX.. ±... ±. b.. ±. c.. ±.6 D.9.9 Basic E.8.8 Basic E.6.6 Basic e.9.9 Basic e.9.9 Basic L.. ±. L.6.6 Reference N 6 Reference Rev. E / NOTES:. Plastic or metal protrusions of.mm maximum per side are not included.. Plastic interlead protrusions of.mm maximum per side are not included.. This dimension is measured at Datum Plane H.. Dimensioning and tolerancing per SME Y.M99.. Index area Pin # I.D. will be located within the indicated zone (SOT6 only). 6. SOT version has no center lead (shown as a dashed line). (L) H GUGE. c L FN7.6 June, 6
14 EL, EL, EL, EL, EL Quarter Size Outline Plastic Packages Family (QSOP) N D (N/) MDP QURTER SIZE OUTLINE PLSTIC PCKGES FMILY SYMBOL QSOP6 QSOP QSOP8 TOLERNCE NOTES Max. E E PIN # I.D. MRK ± ±. b... ±. c ±. B. C B (N/) D.9..9 ±., E ±.8 E... ±., e C SETING. C.7 C B L c SEE DETIL "X" b H e... Basic L... ±.9 L... Basic N 6 8 Reference Rev. E / NOTES:. Plastic or metal protrusions of.6 maximum per side are not included.. Plastic interlead protrusions of. maximum per side are not included.. Dimensions D and E are measured at Datum Plane H.. Dimensioning and tolerancing per SME Y.M99. GUGE. DETIL X L ± FN7.6 June, 6
15 EL, EL, EL, EL, EL Mini SO Package Family (MSOP). M C B D (N/) N MDP MINI SO PCKGE FMILY SYMBOL MSOP8 MSOP TOLERNCE NOTES.. Max... ± ±.9 E E PIN # I.D. b...7/.8 c.8.8 ±. D.. ±., B (N/) E.9.9 ±. E.. ±., e.6. Basic C e H L.. ±. L.9.9 Basic SETING. C N LEDS L b.8 M C B N 8 Reference Rev. C 6/99 NOTES:. Plastic or metal protrusions of.mm maximum per side are not included.. Plastic interlead protrusions of.mm maximum per side are not included.. Dimensions D and E are measured at Datum Plane H.. Dimensioning and tolerancing per SME Y.M99. c SEE DETIL "X" GUGE. L DETIL X ± FN7.6 June, 6
16 Small Outline Package Family (SO) EL, EL, EL, EL, EL D h X N (N/) E E PIN # I.D. MRK c SEE DETIL X (N/) B. M C B L C e H SETING GUGE.. C. M C B b DETIL X L ± MDP7 SMLL OUTLINE PCKGE FMILY (SO) SYMBOL SO8 SO SO6 (. ) SO6 (. ) (SOL6) SO (SOL) SO (SOL) SO8 (SOL8) TOLERNCE NOTES MX ± ±. b ±. c ±. D ±., E ±.8 E ±., e Basic L ±.9 L Basic h Reference N Reference Rev. L / NOTES:. Plastic or metal protrusions of.6 maximum per side are not included.. Plastic interlead protrusions of. maximum per side are not included.. Dimensions D and E are measured at Datum Plane H.. Dimensioning and tolerancing per SME Y.M99 6 FN7.6 June, 6
17 EL, EL, EL, EL, EL Small Outline Transistor Plastic Packages (SC7) E SETING e D e C L. (.8) M C C L WITH PLTING X θ X θ c C b VIEW C BSE METL C L C L. (.) C L L b b R α R VIEW C SETING C c GUGE L E C P.9 LED SMLL OUTLINE TRNSISTOR PLSTIC PCKGE INCHES MILLIMETERS SYMBOL MIN MX MIN MX NOTES b.6... b.6... c c D E E.... e.6 Ref.6 Ref e. Ref. Ref L L.7 Ref.. Ref. L.6 BSC. BSC α o 8 o o 8 o N R.. R.... Rev. 9/ NOTES:. Dimensioning and tolerances per SME Y.M99.. Package conforms to EIJ SC7 and JEDEC MO.. Dimensions D and E are exclusive of mold flash, protrusions, or gate burrs.. Footlength L measured at reference to gauge plane.. N is the number of terminal positions. 6. These Dimensions apply to the flat section of the lead between.8mm and.mm from the lead tip. 7. Controlling dimension: MILLIMETER. Converted inch dimensions are for reference only. ll Intersil U.S. products are manufactured, assembled and tested utilizing ISO9 quality systems. Intersil Corporation s quality certifications can be viewed at Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. ccordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see 7 FN7.6 June, 6
EL5102, EL5103, EL5202, EL5203, EL5302
EL, EL, EL, EL, EL Data Sheet January 7, 8 FN7.8 MHz Slew Enhanced VFs The ELx and ELx families represent highspeed VFs based on a CF amplifier architecture. This gives the typical high slew rate benefits
More informationEL2142. Features. Differential Line Receiver. Applications. Ordering Information. Pinout. Data Sheet February 11, 2005 FN7049.1
Data Sheet FN7049.1 Differential Line Receiver The is a very high bandwidth amplifier designed to extract the difference signal from noisy environments, and is thus primarily targeted for applications
More informationDATASHEET EL5100, EL5101, EL5300. Features. Applications. 200MHz Slew Enhanced VFA. FN7330 Rev 3.00 Page 1 of 15. May 3, FN7330 Rev 3.
DATASHEET EL, EL, EL MHz Slew Enhanced VFA The EL, EL, and EL represent high-speed voltage feedback amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate
More informationFeatures PART MARKING
DATASHEET EL506, EL5306 350MHz Fixed Gain Amplifiers with Enable The EL506 and EL5306 are fixed gain amplifiers with a bandwidth of 350MHz. This makes these amplifiers ideal for today s high speed video
More informationEL5170, EL MHz Differential Twisted-Pair Drivers. Features. Applications. Pinouts FN Data Sheet May 7, 2007
EL570, EL570 Data Sheet FN709.7 00MHz Differential Twisted-Pair Drivers The EL570 and EL570 are single and triple high bandwidth amplifiers with a fixed gain of. They are primarily targeted for applications
More informationDATASHEET EL5156, EL5157, EL5256, EL5257. Features. Applications. Pinouts. <1mV Voltage Offset, 600MHz Amplifiers
EL6, EL7, EL6, EL7
More informationEL5129, EL5329. Multi-Channel Buffers. Features. Applications. Ordering Information FN Data Sheet May 13, 2005
Data Sheet May 3, 25 FN743. Multi-Channel Buffers The EL529 and EL5329 integrate multiple gamma buffers and a single V COM buffer for use in large panel LCD displays of and greater. The EL529 integrates
More informationDATASHEET EL5462. Features. Pinout. Applications. Ordering Information. 500MHz Low Power Current Feedback Amplifier. FN7492 Rev 0.
DATASHEET EL5462 5MHz Low Power Current Feedback Amplifier The EL5462 is a current feedback amplifier with a bandwidth of 5MHz which makes this amplifier ideal for today s high speed video and monitor
More information(8 LD SOIC, MSOP) (24 LD QSOP)
EL57, EL57 Data Sheet FN72.8 5MHz Differential Twisted-Pair Drivers The EL57 and EL57 are single and triple high bandwidth amplifiers with a fixed gain of 2. They are primarily targeted for applications
More informationISL Features. Multi-Channel Buffers Plus V COM Driver. Ordering Information. Applications. Pinout FN Data Sheet December 7, 2005
Data Sheet FN6118.0 Multi-Channel Buffers Plus V COM Driver The integrates eighteen gamma buffers and a single V COM buffer for use in large panel LCD displays of 10 and greater. Half of the gamma channels
More informationEL5027. Dual 2.5MHz Rail-to-Rail Input-Output Buffer. Features. Applications. Ordering Information. Pinout. Data Sheet May 4, 2007 FN7426.
EL57 Data Sheet FN746.1 Dual.5MHz Rail-to-Rail Input-Output Buffer The EL57 is a dual, low power, high voltage rail-to-rail input-output buffer. Operating on supplies ranging from 5V to 15V, while consuming
More informationDATASHEET EL8108. Features. Applications. Pinouts. Video Distribution Amplifier. FN7417 Rev 2.00 Page 1 of 14. January 29, FN7417 Rev 2.
EL Video Distribution Amplifier OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at --INTERSIL or www.intersil.com/tsc DATASHEET FN77 Rev. The EL is a dual current feedback
More informationEL5175, EL MHz Differential Line Receivers. Features. Applications. Pinouts. Data Sheet May 10, 2007 FN7306.6
EL575, EL5375 Data Sheet May, 7 FN736.6 55MHz Differential Line Receivers The EL575 and EL5375 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments.
More informationDATASHEET EL2125. Features. Applications. Ordering Information. Pinouts. Ultra-Low Noise, Low Power, Wideband Amplifier. FN7045 Rev 3.
DATASHEET EL Ultra-Low Noise, Low Power, Wideband Amplifier The EL is an ultra-low noise, wideband amplifier that runs on half the supply current of competitive parts. It is intended for use in systems
More informationDATASHEET EL8200, EL8201, EL8401. Features. Applications. Pinouts. 200MHz Rail-to-Rail Amplifiers. FN7105 Rev 5.00 Page 1 of 16.
DATASHEET EL8, EL8, EL8 MHz Rail-to-Rail Amplifiers FN7 Rev. The EL8, EL8, and EL8 represent rail-to-rail amplifiers with a -3dB bandwidth of MHz and slew rate of V/µs. Running off a very low supply current
More informationEL5172, EL MHz Differential Line Receivers. Features. Applications. Pinouts FN Data Sheet January 25, 2008
EL57, EL57 Data Sheet FN7.8 5MHz Differential Line Receivers The EL57 and EL57 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments. They are
More informationEL5171, EL5371. Features. 250MHz Differential Twisted-Pair Drivers. Applications. Ordering Information. Pinouts FN Data Sheet October 30, 2006
EL57, EL57 Data Sheet FN77.6 5MHz Differential Twisted-Pair Drivers The EL57 and EL57 are single and triple bandwidth amplifiers with an output in differential form. They are primarily targeted for applications
More informationDATASHEET. Features. Applications. Pinouts EL5160 (8 LD SOIC) TOP VIEW EL5160, EL5161, EL5260, EL5261, EL5360
DATASHEET EL6, EL6, EL6, EL6, EL6 MHz LowPower Current Feedback Amplifiers The EL6, EL6, EL6, EL6, and EL6 are current feedback amplifiers with a bandwidth of MHz and operate from just.7ma supply current.
More informationDATASHEET EL8102, EL8103. Features. Applications. Ordering Information. Pinouts. 500MHz Rail-to-Rail Amplifiers. FN7104 Rev 7.
MHz Rail-to-Rail Amplifiers OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT EL8 AND EL8 DATASHEET FN74 Rev 7. The EL8, EL8 represent single rail-to-rail amplifiers with a -db bandwidth of MHz and slew rate
More informationISL4089. Features. DC-Restored Video Amplifier. Applications. Related Documents. Ordering Information. Pinout FN Data Sheet June 28, 2006
Data Sheet FN9. DCRestored Video Amplifier The is complete DCrestored monolithic video amplifier subsystem. It contains a high performance video amplifier and a nulling, sampleandhold amplifier designed
More informationDATASHEET EL2126. Features. Applications. Pinouts. Ultra-Low Noise, Low Power, Wideband Amplifier. FN7046 Rev 4.00 Page 1 of 19.
DATASHEET EL6 Ultra-Low Noise, Low Power, Wideband Amplifier The EL6 is an ultra-low noise, wideband amplifier that runs on half the supply current of competitive parts. It is intended for use in systems
More informationEL5150, EL5151, EL5250, EL5251, EL5451
EL, EL, EL, EL, EL Data Sheet January 6, 8 FN78.7 MHz Amplifiers The EL, EL, EL, EL, and EL are MHz bandwidth db voltage mode feedback amplifiers with DC accuracy of.%, mv offsets and kv/v open loop gains.
More informationSALLEN-KEY LOW PASS FILTER
DATASHEET ISL28325, ISL28345 40V Low Power Dual and Quad Operational Amplifier The ISL28325 and ISL28345 are dual and quad general purpose amplifiers featuring low noise vs power consumption. The combination
More informationDATASHEET. Features. Applications. Pinouts EL5170, EL MHz Differential Twisted-Pair Drivers. FN7309 Rev Page 1 of 14.
DATASHEET EL5170, EL5370 100MHz Differential Twisted-Pair Drivers The EL5170 and EL5370 are single and triple high bandwidth amplifiers with a fixed gain of 2. They are primarily targeted for applications
More informationDATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier.
ISL55 MMIC Silicon Bipolar Broadband Amplifier NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN17 Rev.
More informationHA-2520, HA MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers. Features. Applications. Ordering Information
HA-22, HA-22 Data Sheet August, 2 FN2894. 2MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-22/22 comprise a series of operational amplifiers delivering an unsurpassed
More informationEL5174, EL MHz Differential Twisted-Pair Drivers. Features. Applications. Pinouts. Data Sheet October 30, 2007 FN7313.6
EL57, EL57 Data Sheet FN7.6 55MHz Differential Twisted-Pair Drivers The EL57 and EL57 are single and triple high bandwidth amplifiers with an output in differential form. They are primarily targeted for
More informationDATASHEET EL5175, EL5375. Features. Applications. Pinouts. Ordering Information. 550MHz Differential Line Receivers. FN7306 Rev 7.
DATASHEET EL575, EL5375 55MHz Differential Line Receivers FN736 Rev 7. The EL575 and EL5375 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments.
More informationData Sheet May 10, Features. Pinout
EL576 Data Sheet May, 7 FN7. 5MHz Differential Twisted-Pair Driver The EL576 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving
More informationDATASHEET. Features. Applications. Pinouts EL5173, EL MHz Differential Twisted-Pair Drivers. FN7312 Rev Page 1 of 15.
DATASHEET EL7, EL7 MHz Differential Twisted-Pair Drivers The EL7 and EL7 are single and triple high bandwidth amplifiers with a fixed gain of 2. They are primarily targeted for applications such as driving
More informationHA Features. Quad, 3.5MHz, Operational Amplifier. Applications. Pinout. Ordering Information. Data Sheet July 2004 FN2922.5
HA-4741 Data Sheet July 24 FN2922. Quad, 3.MHz, Operational Amplifier HA-4741, which contains four amplifiers on a monolithic chip, provides a new measure of performance for general purpose operational
More informationEL5172, EL MHz Differential Line Receivers. Features. Applications. Ordering Information. Pinouts FN Data Sheet August 3, 2005
EL57, EL57 Data Sheet FN7.6 5MHz Differential Line Receivers The EL57 and EL57 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments. They are
More informationOrdering Information PART NUMBER PART MARKING TAPE & REEL PACKAGE PKG. DWG. # ELIWT-T7 8 7 (3k pcs) Ld TSOT MDP49 ELIWT-T7A 8 7 (2 pcs) Ld TSOT MDP49
EL, EL2, EL4 Data Sheet FN79.7 6MHz Rail-to-Rail Input-Output Op Amps The EL, EL2, and EL4 are low power, high voltage rail-to-rail input-output amplifiers. The EL represents a single amplifier, the EL2
More informationHA5023. Dual 125MHz Video Current Feedback Amplifier. Features. Applications. Ordering Information. Pinout. Data Sheet September 30, 2015 FN3393.
HA523 Data Sheet September 3, 215 FN3393.9 Dual 125MHz Video Current Feedback Amplifier The HA523 is a wide bandwidth high slew rate dual amplifier optimized for video applications and gains between 1
More informationEL5175, EL MHz Differential Line Receivers. Features. Applications. Pinouts. Data Sheet February 11, 2005 FN7306.5
EL575, EL5375 Data Sheet February, 5 FN736.5 55MHz Differential Line Receivers The EL575 and EL5375 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy
More informationHA Features. 12MHz, High Input Impedance, Operational Amplifier. Applications. Pinout. Part Number Information. Data Sheet May 2003 FN2893.
OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA-2525 HA-2515 Data Sheet May 23 FN2893.5 12MHz, High Input Impedance, Operational Amplifier HA-2515 is a high performance operational amplifier which sets
More informationNano Power, Push/Pull Output Comparator
Nano Power, Push/Pull Output Comparator ISL289 The ISL289 is a nano power comparator optimized for low-power applications. This device is designed for single-supply operation from.8v to.v and typically
More informationHA MHz Video Buffer. Features. Applications. Ordering Information. Pinouts. Data Sheet February 6, 2006 FN2924.8
HA-533 Data Sheet February 6, 26 FN2924.8 25MHz Video Buffer The HA-533 is a unity gain monolithic IC designed for any application requiring a fast, wideband buffer. Featuring a bandwidth of 25MHz and
More information550MHz Differential Twisted-Pair Drivers
55MHz Differential Twisted-Pair Drivers EL57, EL57 The EL57 and EL57 are single and triple high bandwidth amplifiers with an output in differential form. They are primarily targeted for applications such
More information250MHz Differential Twisted-Pair Drivers
MHz Differential Twisted-Pair Drivers EL7, EL7 The EL7 and EL7 are single and triple bandwidth amplifiers with an output in differential form. They are primarily targeted for applications such as driving
More information250MHz Differential Twisted-Pair Driver
5MHz Differential Twisted-Pair Driver EL576 The EL576 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving twisted-pair lines or
More informationDATASHEET CA3127. Features. Applications. Ordering Information. Pinout. High Frequency NPN Transistor Array. FN662 Rev.5.00 Page 1 of 9.
DATASHEET CA1 High Frequency NPN Transistor Array The CA1 consists of five general purpose silicon NPN transistors on a common monolithic substrate. Each of the completely isolated transistors exhibits
More informationData Sheet September 3, Features TEMP. RANGE ( C)
Data Sheet FN6387. Power Line Communication (PLC) The ISL57 is a dual operational amplifier designed for PLC line driving in OFDM and SSC based solutions. This device features a high drive capability of
More informationDATASHEET EL7104. Features. Ordering Information. Applications. Pinout. High Speed, Single Channel, Power MOSFET Driver. FN7113 Rev 2.
DATASHEET EL7104 High Speed, Single Channel, Power MOSFET Driver FN7113 Rev 2.00 The EL7104 is a matched driver IC that improves the operation of the industry-standard TC-4420/29 clock drivers. The Elantec
More informationDATASHEET HA Features. Applications. Pinout. Part Number Information. 12MHz, High Input Impedance, Operational Amplifier
12MHz, High Input Impedance, Operational Amplifier OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA-2525 DATASHEET FN289 Rev 6. HA-255 is an operational amplifier whose design is optimized to deliver excellent
More informationHA MHz, PRAM Four Channel Programmable Amplifiers. Features. Applications. Pinout. Ordering Information
HA0 Data Sheet August 00 FN89. 0MHz, PRAM Four Channel Programmable Amplifiers The HA0 comprise a series of fourchannel programmable amplifiers providing a level of versatility unsurpassed by any other
More informationHA-2520, HA-2522, HA-2525
HA-, HA-, HA- Data Sheet November, 6 FN894.8 MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-, HA-, HA- comprise a series of operational amplifiers delivering an unsurpassed
More informationDATASHEET HA-2520, HA-2522, HA Features. Applications. Ordering Information
DATASHEET 2MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers FN2894 Rev 1. comprise a series of operational amplifiers delivering an unsurpassed combination of specifications
More informationDATASHEET E L2480. Features. Ordering Information. Applications. Pinout. 250MHz/3mA Current Mode Feedback Amplifier. FN7055 Rev 1.
DATASHEET E L2480 250MHz/3mA Current Mode Feedback Amplifier The EL2480 is a quad current-feedback operational amplifier which achieves a -3dB bandwidth of 250MHz at a gain of +1 while consuming only 3mA
More informationHA-2640, HA Features. 4MHz, High Supply Voltage Operational Amplifiers. Applications. Ordering Information. Pinouts
HA-264, HA-2645 Data Sheet January 3, 26 FN294.5 4MHz, High Supply Voltage Operational Amplifiers HA-264 and HA-2645 are monolithic operational amplifiers which are designed to deliver unprecedented dynamic
More informationDATASHEET HFA1112. Features. Applications. Related Literature. Pin Descriptions. Ordering Information
DATASHEET HFA1112 85MHz, Low Distortion Programmable Gain Buffer Amplifiers FN2992 Rev 8. July 27, 25 The HFA1112 is a closed loop Buffer featuring user programmable gain and ultra high speed performance.
More informationDATASHEET HA Features. Applications. Pinout. Ordering Information. Quad, 3.5MHz, Operational Amplifier. FN2922 Rev 5.00 Page 1 of 8.
DATASHEET HA-4741 Quad, 3.5MHz, Operational Amplifier HA-4741, which contains four amplifiers on a monolithic chip, provides a new measure of performance for general purpose operational amplifiers. Each
More informationDATASHEET ISL Features. Applications. Ordering Information. Pinout. High Supply Voltage 200MHz Unity-Gain Stable Operational Amplifier
DATASHEET High Supply Voltage MHz UnityGain Stable Operational Amplifier FN7497 Rev 4. The is a high speed, low power, low cost monolithic operational amplifier. The is unitygain stable and features a
More informationDATASHEET EL9110. Features. Applications. Ordering Information. Pinout. Differential Receiver/Equalizer. FN7305 Rev 5.
DATASHEET EL9 Differential Receiver/Equalizer FN735 Rev 5. The EL9 is a single channel differential receiver and equalizer. It contains a high speed differential receiver with 5 programmable poles. The
More informationDATASHEET. Features. Applications. Pinouts EL5174, EL MHz Differential Twisted-Pair Drivers. FN7313 Rev 9.00 Page 1 of 15.
DATASHEET EL57, EL57 55MHz Differential Twisted-Pair Drivers The EL57 and EL57 are single and triple high bandwidth amplifiers with an output in differential form. They are primarily targeted for applications
More informationDATASHEET ISL Features. Applications. Ordering Information. Pinout. High Supply Voltage 200MHz Unity-Gain Stable Operational Amplifier
DATASHEET High Supply Voltage MHz UnityGain Stable Operational Amplifier FN69 Rev. The is a high speed, low power, low cost monolithic operational amplifier. The is unitygain stable and features a V/µs
More informationHI-200, HI-201. Dual/Quad SPST, CMOS Analog Switches. Features. Applications. Ordering Information. Functional Diagram FN3121.8
HI-200, HI-201 Data Sheet FN3121.8 Dual/Quad SPST, CMOS Analog Switches HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds
More informationDATASHEET ISL Features. Applications Ordering Information. Pinouts. 5MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amp
DATASHEET ISL2836 MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amp FN63 Rev 6. January 6, 2 The ISL2836 is a low-power single operational amplifier optimized for single supply operation from
More informationFeatures TEMP. RANGE ( C)
DATASHEET HFA0, HFA09, HFA27, HFA28 Ultra High Frequency Transistor Arrays The HFA0, HFA09, HFA27 and the HFA28 are Ultra High Frequency Transistor Arrays that are fabricated from Intersil Corporation
More informationHI-201HS. Features. High Speed, Quad SPST, CMOS Analog Switch. Applications. Ordering Information. Pinout (Switches Shown For Logic 1 Input) FN3123.
HI-HS Data Sheet September 4 FN.4 High Speed, Quad SPST, CMOS Analog Switch The HI-HS is a monolithic CMOS Analog Switch featuring very fast switching speeds and low ON resistance. The integrated circuit
More informationDATASHEET EL5127, EL5227, EL5327, EL5427. Features. Applications. 2.5MHz 4-, 8-, 10- and 12-Channel Rail-to-Rail Buffers. FN7111 Rev 4.
.5MHz -, 8-, - and -Channel Rail-to-Rail Buffers The EL57, EL57, EL57, and EL57 are low power, high voltage rail-to-rail input/output buffers designed for use in reference voltage buffering applications
More informationDATASHEET HA Features. Applications. Ordering Information. Pinouts. 250MHz Video Buffer. FN2924 Rev 8.00 Page 1 of 12.
25MHz Video Buffer NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at -888-INTERSIL or www.intersil.com/tsc DATASHEET FN2924 Rev 8. The HA-533 is a unity
More informationHIP V, 300mA Three Phase High Side Driver. Features. Applications. Ordering Information. Pinout. July 2004
HIP0 Data Sheet July 00 FN. 0V, 00mA Three Phase High Side Driver The HIP0 is a three phase high side N-channel MOSFET driver, specifically targeted for PWM motor control. Two HIP0 may be used together
More informationFeatures TEMP. RANGE ( C)
DATASHEET ISL57 Power Line Communication (PLC) The ISL57 is a dual operational amplifier designed for PLC line driving in OFDM and SSC based solutions. This device features a high drive capability of 750mA
More informationDATASHEET. Features. Applications. Ordering Information. Related Literature ISL MHz, Dual Precision Rail-to-Rail Input-Output (RRIO) Op Amps
DATASHEET ISL28236 5MHz, Dual Precision Rail-to-Rail Input-Output (RRIO) Op Amps FN6921 Rev 2. July 24, 214 The ISL28236 is a low-power dual operational amplifier optimized for single supply operation
More informationDATASHEET EL5120, EL5220, EL5420. Features. Applications. 12MHz Rail-to-Rail Input-Output Op Amps. FN7186 Rev 8.00 Page 1 of 21.
DTSHEET EL, EL, EL4 MHz Rail-to-Rail Input-Output Op mps The EL, EL, and EL4 are low power, high voltage, rail-to-rail input-output amplifiers. The EL contains a single amplifier, the EL contains two amplifiers,
More information60MHz Rail-to-Rail Input-Output Operational Amplifier
6MHz Rail-to-Rail Input-Output Operational Amplifier EL52T The EL52T is a high voltage rail-to-rail input-output amplifier with low power consumption. The EL52T contains two amplifiers. Each amplifier
More informationDATASHEET. Features. Ordering Information. Applications. Related Literature ISL28191, ISL28291
DATASHEET Single and Dual Single Supply Ultra-Low Noise, Low Distortion Rail-to-Rail Output, Op Amp FN656 Rev. The ISL89 and ISL89 are tiny single and dual ultra-low noise, ultra-low distortion operational
More informationDATASHEET ISL Features. Applications. Ordering Information. Pinout. 8MHz Rail-to-Rail Composite Video Driver. FN6104 Rev 5.
DATASHEET ISL59110 8MHz Rail-to-Rail Composite Video Driver The ISL59110 is a single rail-to-rail 3-pole output reconstruction filter with a -3dB roll-off frequency of 8MHz and a slew rate of 40V/µs, with
More informationDATASHEET HC5503T. Features. Applications. Ordering Information. Block Diagram. Balanced PBX/Key System SLIC, Subscriber Line Interface Circuit
NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART HC5503PRC Balanced PBX/Key System SLIC, Subscriber Line Interface Circuit DATASHEET FN4506 Rev 2.00 The Intersil HC5503T is a low cost Subscriber
More informationDATASHEET CA Applications. Pinout. Ordering Information. General Purpose NPN Transistor Array. FN483 Rev.6.00 Page 1 of 7.
DATASHEET CA-386 General Purpose NPN Transistor Array The CA386 consists of five general-purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected
More informationCA3102. Dual High Frequency Differential Amplifier For Low Power Applications Up to 500MHz. Features. Applications. Ordering Information.
CA Data Sheet November 999 File Number 6.6 Dual High Frequency Differential Amplifier For Low Power Applications Up to MHz The CA consists of two independent differential amplifiers with associated constant
More informationSingle and Dual Single Supply Ultra-Low Noise, Ultra-Low Distortion, Rail-to-Rail Output, Op Amp
Single and Dual Single Supply Ultra-Low Noise, Ultra-Low Distortion, Rail-to-Rail Output, Op Amp ISL89, ISL89 The ISL89 and ISL89 are tiny single and dual ultra-low noise, ultra-low distortion operational
More informationHA Features. 650ns Precision Sample and Hold Amplifier. Applications. Functional Diagram. Ordering Information. Pinout
HA-50 Data Sheet June 200 FN2858.5 650ns Precision Sample and Hold Amplifier The HA-50 is a very fast sample and hold amplifier designed primarily for use with high speed A/D converters. It utilizes the
More informationDATASHEET ISL Features. Applications. Related Literature. Single Port, PLC Differential Line Driver
DATASHEET ISL112 Single Port, PLC Differential Line Driver FN8823 Rev.. The ISL112 is a single port differential line driver developed for Power Line Communication (PLC) applications. The device is designed
More informationHA, HA Absolute Maximum Ratings Supply Voltage Between V+ and V Terminals V Differential Input Voltage V
HA, HA Data Sheet October 6, FN9.9 Dual and Quad, 8MHz, Low Noise Operational Amplifiers Low noise and high performance are key words describing HA and HA. These general purpose amplifiers offer an array
More informationDATASHEET ICL8069. Features. Pinouts. Ordering Information. Low Voltage Reference. FN3172 Rev.3.00 Page 1 of 6. Jan FN3172 Rev.3.00.
DATASHEET Low Voltage Reference The is a 1.2V temperature-compensated voltage reference. It uses the band-gap principle to achieve excellent stability and low noise at reverse currents down to 50 A. Applications
More informationPOSSIBLE SUBSTITUTE PRODUCT HA-2842, HA-2544
OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA2842, HA2544 5MHz, Fast Settling, Unity Gain Stable, Video Operational Amplifier DATASHEET FN2843 Rev 4. The HA2841 is a wideband, unity gain stable, operational
More informationHA Features. 400MHz, Fast Settling Operational Amplifier. Applications. Ordering Information. Pinout. Data Sheet August 2002 FN2897.
HA-5 Data Sheet August FN97. MHz, Fast Settling Operational Amplifier The Intersil HA-5 is a wideband, very high slew rate, monolithic operational amplifier featuring superior speed and bandwidth characteristics.
More informationSingle and Dual Single Supply Ultra-Low Noise, Low Distortion Rail-to-Rail Output, Op Amp
Single and Dual Single Supply Ultra-Low Noise, Low Distortion Rail-to-Rail Output, Op Amp ISL89, ISL89 The ISL89 and ISL89 are tiny single and dual ultra-low noise, ultra-low distortion operational amplifiers.
More informationISL6536A. Four Channel Supervisory IC. Features. Applications. Typical Application Schematic. Ordering Information. Data Sheet May 2004 FN9136.
ISL6536A Data Sheet May 2004 FN9136.1 Four Channel Supervisory IC The ISL6536A is a four channel supervisory IC designed to monitor voltages >, = 0.7V. This IC bias range is from 2.7V to 5V but can supervise
More informationDATASHEET ISL28271, ISL Features. Ordering Information. Applications. Related Literature. Pinout
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Dual Micropower, Single Supply, Rail-to-Rail Input and Output (RRIO)
More informationDATASHEET EL5220T. Features. Applications*(see page 13) 12MHz Rail-to-Rail Input-Output Operational Amplifier. FN6892 Rev 0.
DATASHEET EL22T 12MHz Rail-to-Rail Input-Output Operational Amplifier The EL22T is a high voltage rail-to-rail input-output amplifier with low power consumption. The EL22T contains two amplifiers. Each
More informationDATASHEET HA4314B. Features. Ordering Information. Applications. Truth Table. 400MHz, 4x1 Video Crosspoint Switch. FN3679 Rev 12.
DATASHEET B 4MHz, 4x1 Video Crosspoint Switch FN3679 Rev 12. The B is a very wide bandwidth 4x1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing, and other high
More informationDATASHEET EL1503A. Features. Applications. Pinouts. High Power Differential Line Driver. FN7039 Rev 2.00 Page 1 of 17. March 26, FN7039 Rev 2.
DATASHEET EL3A High Power Differential Line Driver The EL3A ADSL Line Driver contains two wideband high-voltage drivers which are ideally suited for both ADSL and HDSL2 applications. They can supply a
More informationDATASHEET. Features. Applications. Pin Configurations EL8176. Micropower Single Supply Rail-to-Rail Input/Output Precision Op Amp
DATASHEET EL876 Micropower Single Supply Rail-to-Rail Input/Output Precision Op Amp FN76 Rev 9. January 6, 5 The EL876 is a precision low power, operational amplifier. The device is optimized for single
More informationDATASHEET HA5023. Features. Applications. Ordering Information. Pinout. Quad 125MHz Video CurrentFeedback Amplifier with Disable
HA2 NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART HA23 Quad 12MHz Video CurrentFeedback Amplifier with Disable DATASHEET FN3 Rev 6. February 8, 26 The HA2 is a quad version of the popular
More informationDATASHEET EL2072. Features. Applications. Pinout. Ordering Information. 730MHz Closed Loop Buffer
730MHz Closed Loop Buffer OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN7033 Rev 0.00 The EL2072 is a wide bandwidth,
More informationDATASHEET EL7202, EL7212, EL7222. Features. Pinouts. Applications. High Speed, Dual Channel Power MOSFET Drivers. FN7282 Rev 2.
DATASHEET EL7202, EL7212, EL7222 High Speed, Dual Channel Power MOSFET Drivers FN7282 Rev 2.00 The EL7202, EL7212, EL7222 ICs are matched dual-drivers that improve the operation of the industry standard
More informationSingle-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5
More informationTEMP. PKG. -IN 1 16 S/H CONTROL PART NUMBER RANGE
DATASHEET 7ns, Low Distortion, Precision Sample and Hold Amplifier FN59 Rev 5. The combines the advantages of two sample/ hold architectures to create a new generation of monolithic sample/hold. High amplitude,
More informationDATASHEET CA3054. Features. Applications. Ordering Information. Pinout. Dual Independent Differential Amp for Low Power Applications from DC to 120MHz
DATASHEET CA5 Dual Independent Differential Amp for Low Power Applications from DC to MHz FN88 Rev.. Jan, 7 The CA5 consists of two independent differential amplifiers with associated constant current
More informationMARKING RANGE ( C) PACKAGE DWG. # HA-2600 (METAL CAN)
DATASHEET 2MHz, High Input Impedance Operational Amplifier is an internally compensated bipolar operational amplifier that features very high input impedance (5M coupled with wideband AC performance. The
More informationSingle and Triple, 1.1mA, 200MHz Amplifiers
Comlinear CLC1603, CLC3603 Single and Triple, 1.1mA, 200MHz Amplifiers Amplify the Human Experience features n 0.1dB gain flatness to 30MHz n 0.02%/0.1 differential gain/phase n 200MHz -3dB bandwidth at
More informationDATASHEET EL2045. Features. Applications. Ordering Information. Pinout. Low-Power 100MHz Gain-of-2 Stable Operational Amplifier
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Low-Power 100MHz Gain-of-2 Stable Operational Amplifier DATASHEET
More informationHA-2600, HA Features. 12MHz, High Input Impedance Operational Amplifiers. Applications. Pinouts. Ordering Information
HA26, HA26 September 998 File Number 292.3 2MHz, High Input Impedance Operational Amplifiers HA26/26 are internally compensated bipolar operational amplifiers that feature very high input impedance (MΩ,
More informationDATASHEET. Features. Applications. Related Literature ISL MHz Multiplexing Amplifier. FN7459 Rev 2.00 Page 1 of 13.
DATASHEET ISL5942 4MHz Multiplexing Amplifier The ISL5942 is a 42MHz bandwidth 2: multiplexing amplifier designed primarily for video switching. This Mux-amp has user-settable gain and also feature a high
More informationDATASHEET HA Features. Applications. Ordering Information. Pinout. 400MHz, Fast Settling Operational Amplifier. FN2897 Rev.5.
DATASHEET MHz, Fast Settling Operational Amplifier The Intersil is a wideband, very high slew rate, monolithic operational amplifier featuring superior speed and bandwidth characteristics. Bipolar construction
More informationHA-2520, HA-2522, HA-2525
HA-, HA-, HA- Data Sheet September 99 File Number 9. MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-// comprise a series of operational amplifiers delivering an unsurpassed
More informationDATASHEET HA-5137A. Features. Applications. Ordering Information. Pinout. 63MHz, Ultra-Low Noise Precision Operational Amplifier
DATASHEET HA-5137A 3MHz, Ultra-Low Noise Precision Operational Amplifier The HA-5137 operational amplifier features an unparalleled combination of precision DC and wideband high speed characteristics.
More information