HOLY ANGEL UNIVERSITY College of Engineering & Architecture Department of Mechanical Engineering
|
|
- Naomi Carr
- 5 years ago
- Views:
Transcription
1 University Vision, Mission, Goals and Objectives: Mission Statement (VMG) HOLY ANGEL UNIVERSITY College of Engineering & Architecture Department of Mechanical Engineering We, the academic community of Holy Angel University, declare ourselves to be a Catholic University. We dedicate ourselves to our core purpose, which is to provide accessible quality education that transforms students into persons of conscience, competence, and compassion. We commit ourselves to our vision of the University as a role-model catalyst for countryside development and one of the most influential, best managed Catholic universities in the Asia-Pacific region. We will be guided by our core values of Christ-centeredness, integrity, excellence, community, and societal responsibility. All these we shall do for the greater glory of God. LAUS DEO SEMPER! College Vision, Goals and Objectives: Vision Mission Goals A center of excellence in engineering and architecture education imbued with Catholic mission and identity serving as a role-model catalyst for countryside development To provide accessible quality engineering and architecture education leading to the development of conscientious, competent and compassionate professionals who continually contribute to the advancement of technology, preserve the environment, and improve life for countryside development. The College of Engineering and Architecture is known for its curricular programs and services, research undertakings, and community involvement that are geared to produce competitive graduates: - who are equipped with high impact educational practices for global employability and technopreneurial opportunities; - whose performance in national licensure examinations and certifications is consistently above national passing rates and that falls within the 75 th to 90 th percentile ranks; and,
2 Objectives - who qualify for international licensure examinations, certifications, and professional recognitions; In its pursuit for academic excellence and to become an authentic instrument for countryside development, the College of Engineering and Architecture aims to achieve the following objectives: 1. To provide students with fundamental knowledge and skills in the technical and social disciplines so that they may develop a sound perspective for competent engineering and architecture practice; 2. To inculcate in the students the values and discipline necessary in developing them into socially responsible and globally competitive professionals; 3. To instill in the students a sense of social commitment through involvement in meaningful community projects and services; 4. To promote the development of a sustainable environment and the improvement of the quality of life by designing technology solutions beneficial to a dynamic world; 5. To adopt a faculty development program that is responsive to the continuing development and engagement of faculty in research, technopreneurship, community service and professional development activities both in the local and international context; 6. To implement a facility development program that promotes a continuing acquisition of state of the art facilities that are at par with leading engineering and architecture schools in the Asia Pacific region; and, 7. To sustain a strong partnership and linkage with institutions, industries, and professional organizations in both national and international levels.
3 Relationship of the Program Educational Objectives to the Vision-Mission of the University and the College of Engineering & Architecture: Mechanical Engineering Educational Outcomes (PEOs): Vision-Mission Within a few years after graduation, our graduates of engineering program are expected to have: Christ- Centeredness Integrity Excellence Community Societal Responsibility 1. Practiced their profession 2. Shown a commitment to life-long learning 3. Manifested faithful stewardship
4 Relationship of the Mechanical Engineering Program Outcomes to the Program Educational Objectives: Student Outcomes (SOs): At the time of graduation, Mechanical engineering graduates should be able to: a) Apply knowledge of mathematics, physical sciences, engineering sciences to the practice of Electrical Engineering PEOs b) Design and conduct experiments, as well as to analyze and interpret data c) Design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability, in accordance with standards d) Function on multidisciplinary teams e) Identify, formulate and solve engineering problems f) Have an understanding of professional and ethical responsibility g) Demonstrate and master the ability to listen, comprehend, speak, write and convey ideas clearly and effectively, in person and through electronic media to all audiences. h) Have broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context
5 i) Recognize the need for, and have an ability to engage in life-long learning and to keep current of the development in the field j) Have knowledge of contemporary issues k) Use the techniques, skills, and modern engineering tools necessary for engineering practice." l) Have knowledge and understanding of engineering and management principles as a member and leader in a team, to manage projects and in multidisciplinary environments
6 COURSE SYLLABUS Course Title: Mechanical Computer Aided Drafting Subject Code: MECAD Course Credit: 1 unit Year Level: 3 rd Year Pre-requisites: BASCAD Course Calendar: 1 st Semester Course Description: The course teaches how to use the CAD mechanical design automation software to build parametric models of parts and assemblies, and how to make drawings of those parts and assemblies. Students will learn to preserve design intent using dimensiondriven systems and geometric relationships. Course Outcomes/Objectives (CO): After completing the course, the student must be able to: PO Code Link(s) a b c d e f g h i j k l m n 1. Demonstrate competency with multiple drawing and modification commands in the CAD software. E E E 2. Create three-dimensional solid models. E E E 3. Create three-dimensional assemblies incorporating multiple solid models. E E E 4. Use industry standards in the preparation of technical mechanical drawings. E E E
7 COURSE ORGANIZATION Time Frame Hours CO Code Link Course Outline Teaching & Learning Activities Assessment Tools (Outcomes-Based) Resources 1 1. CAD OVERVIEW 1.1 CAD User Interface 1.2 Setting the Document Options 1.3 File Management 1.4 Starting a New Document in CAD software 1.5 Useful CAD resources Describe the procedure in changing the default settings for new documents Discuss the system that an operating system or program uses to organize and keep track of files Selection of template for document in the CAD Document dialog box Access a wide range of free, informative resources Basic readings Extended readings Web references plates 2 2. SKETCH ENTITIES AND TOOLS 2.1 Introduction 2.2 Sketch Entities 2.3 Sketch Tools Discuss specific geometries (line, rectangle, parallelogram, slot, polygon, circle, arc, ellipse, parabola, spline, etc.) Modification of the shapes of sketch entities (fillet, chamfer, offset, convert entities, intersection curves, trim, extend, split, jog line, constructive geometry, mirror, stretch, move, rotate, scale, etc.) 3 3. FEATURES 3.1 Extruded Boss/Base 3.2 Draft, Dome, Rib 3.3 Extruded Cut 3.4 Revolved Boss/Base & Cut Modification of the height or thickness to an existing 2d sketch in order to realize a 3D model Creation a slanted shape, adding a
8 dome shape, and including a rib feature in a part Removal of portion of existing 2d sketch or part during 3D modeling Rotation of a contour about an axis and in removing revolved sections out of 3D objects Lofted Boss/Base & Cut 3.6 Swept Boss/Base & Cut 3.7 Hole Wizard 3.8 Shell Creation and cutting of a shape between a number of planes, each of which contains a defined shape or geometry Express the procedure in sweeping a profile through a path(arc, spline, etc.) and in cutting a shape (profile) in one plane along a given path in another plane Addition of hole(s) to an existing 3D model Creation of a hollow shape in an existing 3D model, transforming it into a hollow object having uniform thickness Fillet & Chamfer Tool 3.10 Linear & Circular Pattern 3.11 Mirror 3.12 Reference planes Describe the procedure on making rounded corner and slanted surface added to the corner of a part Creation of rectangular patterns based on a given model and creating circular pattern on a 3D model about an origin Creation of mirror images of features Illustrate a very powerful tool for modeling complex objects
9 PRELIMINARY EXAMINATION 7 4. INTERMEDIATE PART MODELING 4.1 Introduction 4.2 Tutorials Explain the level of expertise required for 2D CAD design in engineering Utilization of sketch tools, mirror, draft for part modeling Modeling 3D parts using Extrusion, Revolved, features tools as well as using Reference planes Solving part modeling problems 8 5. ADVANCED PART MODELING 5.1 Advanced Part Modeling Tutorials 5.2 Advanced Modeling Tools 5.3 Indent Features Creation and manipulation of a model coordinate system Modeling advanced 3D parts using Extrusion, Revolved, Lofted, Swept, Modification, Edit Features, features tools as well as using Reference planes Application of Advance Modeling Tools 9 6. REVOLVED, SWEPT, AND LOFTED PARTS 6.1 Revolved Boss/Base 6.2 Swept Boss/Base 6.3 Lofted Boss/Base Creation of 3D objects using Revolved features tools Usage of Copy features tools Creation of 3D objects using Swept Features tools Usage of Draft Features tools Creation of 3D objects using Lofted Features tools Usage of Circular Pattern Features
10 tools Usage of Reference planes Usage of Copy Features tools 10 CO3 7. ASSEMBLY MODELING 7.1 Starting the Assembly Mode of CAD software 7.2 Inserting Components into an Assembly Document 7.3 Mates Group/class discussion Manipulation of assembly configuration of CAD software Add components to new or existing assemblies Join parts in an assembly and simulate how they fit together and move together 11 CO 3 CO Creating the Components 7.5 Assembling the Components 7.6 Assembly Analysis 7.7 Exploded View/Animation Create assemblies using bottom-up and top-down design approaches Control and automate assemblies with configurations Resolve assembly design problems Use sketches to layout the design of assemblies Better manage large assemblies and save time Efficiently analyze product behavior under mechanical conditions taking into account the physical relationships between the parts of the structure to ensure high quality, performance and safety Show the components of an object slightly separated by a distance, or suspended in surrounding space in the case of three-dimensional CAD models Communicate the intended assembly of mechanical or other
11 parts, and show precisely how they fit together MIDTERM EXAMINATION 13 CO 3 CO 4 8. PART AND ASSEMBLY DRAWINGS 8.1 Orthographic Projection 8.2 Creating a CAD Drawing Template Document properties Sheet properties 8.3 Title block 8.4 Saving the template Create drawings from models Review models in 3D and check for correct geometry and design issues before generating drawings Insert dimensions and annotations from mode sketches and features into drawings automatically CONFIGURATIONS AND DESIGN TABLES 9.1 Design Tables and Configurations Build multiple configurations of parts or assemblies by specifying parameters in an embedded worksheet Control dimensions and suppression state of features, size of the Hole Wizard holes Control configuration properties, including part number in a bill of materials, derived configurations, equations, sketch relations, comments, materials and custom properties Control components suppression state, referenced configuration, fixed or floating position Control assembly features
12 dimensions, suppression state, size of Hole Wizard holes Control mates dimensions of distance and angle mates, suppression state SURFACE MODELING 10.1 Understanding Surfaces 10.2 Introduction to Surfacing Creation of a planar or non planar geometry of zero thickness Create Extruded, Revolved, Swept, Lofted, Planar, Fill and Radiated surfaces Offset, trim, untrim, extend, knit, fillet the surfaces Create a Mid-surface Delete Holes Replace, delete, move and copy the surfaces Thicken the surface body Create thicken surface cut Create a surface cut FINAL EXAMINATION
13 Course References: A. Basic Readings: (Text Book) 1. Dassault Systemes (2014) Solidworks Essentials Training Computrends Systems Technology Inc. 2. Bethune, James D. (2009) Engineering Design and Graphics with Solidworks Dassault Systemes Solidworks Corp. (Concord MA). 3. Onwubolu, Godfrey (2013) Computer-Aided Engineering Design with Solidworks Imperial College Press. 4. Lombard, M. Solidworks 2013 Bible Wiley Publications. B. Extended Readings ( Books, Journals): 1. Planchard, D.C. (2015) Engineering Design with SolidWorks SDC Publications. 2. Planchard, D.C. and Planchard, M.P. (2012) Assembly Modeling with SolidWorks SDC Publications. 3. Planchard, D.C. and Planchard, M.P. SolidWorks 2009 Tutorial SDC Publications. 4. Reyes, A. (2008) Beginner s Guide to SolidWorks SDC Publications 5. (October 2003) SolidWorks Workshop Integrated Teaching & Learning Laboratory & Program College of Engineering and Applied Science University of Colorado at Boulder C. Web References
14 Course Requirements and Policies 1. 3 Major Examinations (PRELIMS, MIDTERMS, FINALS) Design Plates (Minimum) 3. Maximum Allowable Absences: 3 (held once a week) Aside from academic deficiency, other grounds for failing grade are: 1. Grave misconduct and/or cheating during examinations. 2. A failing academic standing and failure to take graded exams. 3. Unexcused absences of more than the maximum allowable absences per term.
15 Grading System Class Standing/Quizzes (60%) 3 Major Exams (40%) TOTAL (100%) Passing Grade (60%) CAMPUS++ COLLEGE ONLINE GRADING SYSTEM Legend: (All Items in Percent) CSA P M F MEA PCA MCA FCA Class Standing Average for All Performance Items (Cumulative) Prelim Examination Score Midterm Examination Score Final Examination Score Major Exam Average Prelim Computed Average Midterm Computed Average Final Computed Average Note: For purposes of illustration, the sharing between CSA and MEA is shown below as 60% and 40%, respectively, when computing the Computed Average for each Grading Period. Depending on the grading parameters set for a subject the sharing may be 65%- 35%, 60%-40%, or other possible combinations. Computation of Prelim Computed Average (PCA) CSA = Sum of Raw Scores Sum of Perfect Scores x 100 MEA = P PCA = (60%)(CSA) + (40%)(MEA)
16 Computation of Midterm Computed Average (MCA) CSA = Sum of Raw Scores Sum of Perfect Scores x 100 MEA = P+ M 2 MCA = (60%)(CSA) + (40%)(MEA) Computation of Final Computed Average (FCA) CSA = Sum of Raw Scores Sum of Perfect Scores x 100 MEA = P+ M+F 3 FCA = (60%)(CSA) + (40%)(MEA)
17 Note: A student's Computed Average is a consolidation of Class Standing Percent Average and Major Exam Percent Average. Date Revised: Date Effectivity: Prepared By: Checked By: Approved By: April 30, 2016 June, 2016 Engr. Wilfredo L. Infante ME Faculty Engr. Jaypee B. Pajarillaga Chairperson, ME Department Dr. Ma. Doris C. Bacamante Dean, College of Engineering and Architecture
Beginner s Guide to SolidWorks Level I
Beginner s Guide to SolidWorks 2013 - Level I Parts, Assemblies, Drawings, Simulation Xpress Alejandro Reyes MSME, CSWP, CSWI SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices.
More informationFrom the above fig. After sketching the path and profile select the sweep command First select the profile from property manager tree And then select
Chapter 5 In sweep command there is a) Two sketch profiles b) Two path c) One sketch profile and one path The sweep profile is used to create threads springs circular things and difficult geometry. For
More informationBeginner s Guide to SolidWorks Level I
Beginner s Guide to SolidWorks 2014 - Level I Parts, Assemblies, Drawings, PhotoView 360 and Simulation Xpress Videos Now includes SolidWorks training videos Alejandro Reyes MSME, CSWP, CSWI Multimedia
More informationEducation Curriculum Combined Specialist
Education Curriculum Combined Specialist Invest your time in imagining next generation designs. Here s what we will teach you to give shape to your imagination. CATIA Combined Specialist Course CATIA Mechanical
More informationOfficial Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA
Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA SolidWorks 2012-2015 An authorized CSWA preparation exam guide with additional information on the CSDA and CSWSA-FEA exams
More informationCATIA Instructor-led Live Online Training Program
Course Outline Introduction & Understanding to CATIA Environment Introduction & Understanding to CATIA interface Starting new file Understand the Sketcher workbench of CATIA V5 Start a new file in the
More informationSOLIDWORKS Essentials
SOLIDWORKS Essentials Length: 5 days Prerequisite: Mechanical design experience and experience with the Windows operating system. Description: SOLIDWORKS Essentials teaches you how to use SOLIDWORKS mechanical
More informationIntroducing SolidWorks
Introducing SolidWorks SAAST Robotics 2008 SolidWorks Software Visually-based 3-D Mechanical design software Engineers and Designers use it to: Quickly sketch out ideas Experiment with features, dimensions
More informationComputer Aided Design Parametric Modelling
Level: 2 Credit value: 10 Unit aim The use of computer aide design (CAD) systems in industry has become an essential part of the modern working environment. It is used at all stages of the design period,
More informationTRAINING COURSE PROSPECTUS
SOLIDWORKS Essentials Duration: Prerequisites: Description: The topics covered in this course are: 4 Days Mechanical design experience; experience with the Windows operating system SOLIDWORKS Essentials
More informationTable of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.
Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA
More informationEssentials of SOLIDWORKS 2015 (4+ Days) * Ve-I Bonus! * File Management + SimulationXpress
Essentials of SOLIDWORKS 2015 (4+ Days) * Ve-I Bonus! * File Management + SimulationXpress Overview What is SOLIDWORKS? Interface Tour View Manipulation Provides some background info on the SOLIDWORKS
More informationIntroduction to Creo Parametric 2.0
Introduction to Creo Parametric 2.0 Overview Course Code Course Length TRN-3902-T 5 Days In this course, you will learn core modeling skills and quickly become proficient with Creo Parametric 2.0. Topics
More informationSpatula. Spatula SW 2015 Design & Communication Graphics Page 1
Spatula Introduction: The model shown in the picture is made of three parts, - the base, the washer and the handle. The base requires the use of Spline and Style Spline command, Slot command and Mirror
More informationHere are the standard pre-requisites for the training course. Potential students should have or completed the following prior to the class:
Course: Solid Edge Fundamentals Duration: 5 days Version: ST8 At Course Completion Students will have learned how to utilize Solid Edge to design production level parametric (ordered) models of parts,
More informationExplanation of buttons used for sketching in Unigraphics
Explanation of buttons used for sketching in Unigraphics Sketcher Tool Bar Finish Sketch is for exiting the Sketcher Task Environment. Sketch Name is the name of the current active sketch. You can also
More informationAutodesk Inventor Introduction to Solid Modeling
Autodesk Inventor Introduction to Solid Modeling Course Length: 5 days The Autodesk Inventor Introduction to Solid Modeling training course provides you with an understanding of the parametric design philosophy
More informationSolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
More informationAutodesk Fusion 360 Introduction to Parametric Modeling
Autodesk Fusion 360 Introduction to Parametric Modeling Course Length: 5 days The Autodesk Fusion 360 Introduction to Parametric Modeling training course provides you with an understanding of the parametric
More informationSpokane Public Schools Course: Drafting and Design Technology
Spokane Public Schools Drafting and Design Technology Course: Drafting and Design Technology Total Framework Hours up to: 180 hours CIP Code: 140102 Exploratory Preparatory Date Last Modified: 4/2/2015
More informationAutodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 1]
11/29/2006-3:00 pm - 4:30 pm Room:Marcello - 4404 (MSD Campus) Autodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 1] Daniel Banach - MasterGraphics MA24-2 Are you preparing to
More informationCOMPUTER AIDED ENGINEERING DESIGN (BFF2612) PART DESIGN Sketch Based Features
COMPUTER AIDED ENGINEERING DESIGN (BFF2612) PART DESIGN Sketch Based Features by Dr. Mohd Nizar Mhd Razali Faculty of Manufacturing Engineering mnizar@ump.edu.my MODELLING STRATEGIES Determine model type
More informationInventor 2016 Essentials Plus
Autodesk NEW Features a chapter on sheet metal design Inventor 2016 Essentials Plus Daniel T. Banach & Travis Jones SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF
More informationProduct Modelling in Solid Works
Product Modelling in Solid Works In the following exercise you will use solid works to construct the computer mouse shown opposite. In this exercise you will use a number of advanced features to achieve
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationIntroduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW
Emmett Wemp EDTECH 503 Introduction to Autodesk Inventor User Interface Fill in the blanks of the different tools available in the user interface of Autodesk Inventor as your instructor discusses them.
More information1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define.
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Control + Click HERE to view enlarged IMAGE and Construction Strategy he following set of
More informationFeature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05
Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05 Today s Objectives Feature-Based Modeling (comprised of 2 sections as shown below) 1. Breaking it down into features Creating
More informationCreo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling
Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...
More informationCATIA V5 Workbook Release V5-6R2013
CATIA V5 Workbook Release V5-6R2013 Richard Cozzens SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more
More informationCAPILANO UNIVERSITY COURSE OUTLINE
CAPILANO UNIVERSITY COURSE OUTLINE Term: Fall 2015 Course No. APSC 130 Course: TECHNICAL DRAFTING AND COMPUTER-AIDED DESIGN INSTRUCTOR Office: FR?? Tel: 604-986-1911 (Ext.??) email: @capilanou.ca Credits:
More informationAcademic Course Description
Academic Course Description BME 101 ENGINEERING GRAPHICS BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BME 102 ENGINEERING GRAPHICS First
More informationWireless Mouse Surfaces
Wireless Mouse Surfaces Design & Communication Graphics Table of Contents Table of Contents... 1 Introduction 2 Mouse Body. 3 Edge Cut.12 Centre Cut....14 Wheel Opening.. 15 Wheel Location.. 16 Laser..
More informationCourse Structure : Lectures Tutorials Practical s Credits 2-4 6
Department Course Code Course Title Course Category : MECHANICAL ENGINEERING : A10301 : ENGINEERING DRAWING : Core Course Structure : Lectures Tutorials Practical s Credits 2-4 6 I. Course Overview: One
More informationParametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC
Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of
More informationADA Curriculum for Pre-Engineering Students Correlation Guide
ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain
More informationPart Design. Sketcher - Basic 1 13,0600,1488,1586(SP6)
Part Design Sketcher - Basic 1 13,0600,1488,1586(SP6) In this exercise, we will learn the foundation of the Sketcher and its basic functions. The Sketcher is a tool used to create two-dimensional (2D)
More informationDepartment of Electrical and Electronics Engineering BME 102 ENGINEERING GRAPHICS First Semester, (odd Semester)
Academic Course Description BME 102 ENGINEERING GRAPHICS BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BME 102 ENGINEERING GRAPHICS First
More informationAutodesk Inventor for Designers Release 5
Autodesk Inventor for Designers Release 5 Sham Tick ickoo oo Professor Department of Mechanical Engineering Technology Purdue University Calumet Hammond, Indiana U.S.A. CADCIM Technologies (www.cadcim.com)
More informationTeach Yourself UG NX Step-by-Step
Teach Yourself UG NX Step-by-Step By Hui Zhang Ph.D., P.Eng. www.geocities.com/zhanghui1998 Table of Contents Chapter 1 Introduction... 1 1.1 UG NX User Interface... 1 1.2 Solid Modeling Fundamentals...
More informationSOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationSDC. SolidWorks Tutorial 2001Plus. A Competency Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.
2001Plus A Competency Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com Project 2 Below are the desired
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationAutodesk Inventor 2016
Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationSolidWorks 2014 Part I - Basic Tools
SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationSoftware Development & Education Center NX 8.5 (CAD CAM CAE)
Software Development & Education Center NX 8.5 (CAD CAM CAE) Detailed Curriculum Overview Intended Audience Course Objectives Prerequisites How to Use This Course Class Standards Part File Naming Seed
More informationEngineering & Computer Graphics Workbook Using SolidWorks 2014
Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationCreo Parametric 4.0 Basic Design
Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes
More informationEngineering & Computer Graphics Workbook Using SOLIDWORKS
Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationSolidWorks 2013 Part I - Basic Tools
SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationDEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY CAPSULE PROGRAM Funded by NSF grant #0833636 Tutorial 02 3D Part Modeling SolidWorks 2010 Copyright 2010 Prof. Zeid 3D Part Modeling
More informationActivity 5.2 Making Sketches in CAD
Activity 5.2 Making Sketches in CAD Introduction It would be great if computer systems were advanced enough to take a mental image of an object, such as the thought of a sports car, and instantly generate
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationAlternatively, the solid section can be made with open line sketch and adding thickness by Thicken Sketch.
Sketcher All feature creation begins with two-dimensional drawing in the sketcher and then adding the third dimension in some way. The sketcher has many menus to help create various types of sketches.
More informationCOURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2
COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation
More informationParametric Design 1
Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students
More informationand Engineering Graphics
SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationCreo Parametric 1.0. for Engineers and Designers. CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.
Creo Parametric 1.0 for Engineers and Designers CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor Department of Mechanical
More informationDrawing and Assembling
Youth Explore Trades Skills Description In this activity the six sides of a die will be drawn and then assembled together. The intent is to understand how constraints are used to lock individual parts
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationModel House Exercise-( Extrude)
-( Extrude) Prerequisite knowledge Focus of the lesson Commands Used This lesson requires an understanding of using the sketch commands including Inserting a new sketch Adding sketch geometry Understanding
More informationSurface Modeling. Prerequisites. Stats
Surface Modeling With all of its powerful feature creation tools, solid modeling is not capable of capturing the complex shapes. To capture such complex shapes, surface modeling techniques are widely used.
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationParametric Modeling with Creo Parametric 2.0
Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationCOURSE SYLLABUS. Course Prefix Number:
COURSE SYLLABUS COURSE IDENTIFICATION Course Prefix Number: ETEC121 Course Title: Engineering Graphics I Division: Applied Science Division Program: Industrial Engineering Technology Credit Hours: 3 Revision
More informationSolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects SolidWorks 2005 Tutorial and MultiMedia CD A Step-by-step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard
More informationCopyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material
ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2008 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better
More informationObjectives. Inventor Part Modeling MA 23-1 Presented by Tom Short, P.E. Munro & Associates, Inc
Objectives Inventor Part Modeling MA 23-1 Presented by Tom Short, P.E. Munro & Associates, Inc To demonstrate most of the sketch tools and part features in : Inventor Release 6 And, to show logical techniques
More informationAEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.
AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationNX 8.5 for Engineers and Designers
NX 8.5 for Engineers and Designers CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor Department of Mechanical Engineering
More informationPLTW IED MID TERM EXAM REVIEW Part A Multiple Choice
2014-15 PLTW IED MID TERM EXAM REVIEW Part A Multiple Choice Directions: Select the letter of the response which best completes the item or answers the question. Then record your answer on the answer sheet
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationAuto-CAD 2005 Seminar DFTG 1091
HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD 2005 Seminar DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS
More informationRelease: 1. MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
Release: 1 MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements Modification History
More informationCopyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material
ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2005 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationShaft Hanger - SolidWorks
ME-430 INTRODUCTION TO COMPUTER AIDED DESIGN Shaft Hanger - SolidWorks BY: DR. HERLI SURJANHATA ASSIGNMENT Submit TWO isometric views of the Shaft Hanger with your report, 1. Shaded view of the trimetric
More informationCATIA V5R20. for Engineers & Designers
CATIA V5R20 for Engineers & Designers Contributing Authors Sham Tickoo Professor Department of Mechanical Engineering Technology Purdue University Calumet Hammond, Indiana, USA D.Saravanan Sr. CAD Engineer
More informationAuto-CAD Complete DFTG 1091
HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD Complete DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS Auto-CAD
More informationParametric Modeling with
Parametric Modeling with UGS NX 6 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Parametric Modeling with
More informationBeginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS
Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling
More informationComputer Aided Design I
Black Horse Pike Regional School District 580 Erial Road, Blackwood, NJ 08012 Computer Aided Design I COURSE OF STUDY Technology Department Written by: Ken Whalen, Steve Arena and Vince Mannino Date: May
More informationPart Design Fundamentals
Part Design Fundamentals 1 Course Presentation Objectives of the course In this course you will learn basic methods to create and modify solids features and parts Targeted audience New CATIA V5 Users 1
More informationIntroduction. Parametric Design
Introduction This text guides you through parametric design using Creo Parametric. While using this text, you will create individual parts, assemblies, and drawings. Parametric can be defined as any set
More informationEngineering Design. with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects Engineering Design with SolidWorks 2010 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling Introductory Level
More information10/14/2010. Chevy Malibu. Vehicle Design with Solidworks. Start SolidWorks Create a New SolidWorks Document. Miles, Rowardo B
Chevy Malibu Vehicle Design with Solidworks Start SolidWorks Create a New SolidWorks Document Miles, Rowardo B 1 Click: Part and then OK Now you are ready to make a Part. 2 Right Toolbar: Document Properties:
More informationCOURSE OUTLINE. School of Engineering Technology and Applied Science. Applied Biological and Environmental Science (ABES)
COURSE OUTLINE SCHOOL: School of Engineering Technology and Applied Science DEPARTMENT: Applied Biological and Environmental Science (ABES) PROGRAM: Architectural Technology COURSE TITLE: Architectural
More informationKankakee Community College
Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces
More informationEngineering Design with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.
Engineering Design with SolidWorks 2003 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com
More informationIntroduction to Sheet Metal Features SolidWorks 2009
SolidWorks 2009 Table of Contents Introduction to Sheet Metal Features Base Flange Method Magazine File.. 3 Envelopment & Development of Surfaces.. 14 Development of Transition Pieces.. 23 Conversion to
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Fall 00 NOTE: This course is not
More informationSOLIDWORKS 2017 Basic Tools
SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationSash Clamp. Sash Clamp SW 2015 Design & Communication Graphics Page 1.
Sash Clamp 1 Introduction: The Sash clamp consists of nine parts. In creating the clamp we will be looking at the improvements made by SolidWorks in linear patterns, adding threads and in assembling the
More informationBelow are the desired outcomes and usage competencies based on the completion of Project 4.
Engineering Design with SolidWorks Project 4 Below are the desired outcomes and usage competencies based on the completion of Project 4. Project Desired Outcomes: An understanding of the customer s requirements
More information